| /* |
| * NET3 Protocol independent device support routines. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * Derived from the non IP parts of dev.c 1.0.19 |
| * Authors: Ross Biro |
| * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> |
| * Mark Evans, <evansmp@uhura.aston.ac.uk> |
| * |
| * Additional Authors: |
| * Florian la Roche <rzsfl@rz.uni-sb.de> |
| * Alan Cox <gw4pts@gw4pts.ampr.org> |
| * David Hinds <dahinds@users.sourceforge.net> |
| * Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> |
| * Adam Sulmicki <adam@cfar.umd.edu> |
| * Pekka Riikonen <priikone@poesidon.pspt.fi> |
| * |
| * Changes: |
| * D.J. Barrow : Fixed bug where dev->refcnt gets set |
| * to 2 if register_netdev gets called |
| * before net_dev_init & also removed a |
| * few lines of code in the process. |
| * Alan Cox : device private ioctl copies fields back. |
| * Alan Cox : Transmit queue code does relevant |
| * stunts to keep the queue safe. |
| * Alan Cox : Fixed double lock. |
| * Alan Cox : Fixed promisc NULL pointer trap |
| * ???????? : Support the full private ioctl range |
| * Alan Cox : Moved ioctl permission check into |
| * drivers |
| * Tim Kordas : SIOCADDMULTI/SIOCDELMULTI |
| * Alan Cox : 100 backlog just doesn't cut it when |
| * you start doing multicast video 8) |
| * Alan Cox : Rewrote net_bh and list manager. |
| * Alan Cox : Fix ETH_P_ALL echoback lengths. |
| * Alan Cox : Took out transmit every packet pass |
| * Saved a few bytes in the ioctl handler |
| * Alan Cox : Network driver sets packet type before |
| * calling netif_rx. Saves a function |
| * call a packet. |
| * Alan Cox : Hashed net_bh() |
| * Richard Kooijman: Timestamp fixes. |
| * Alan Cox : Wrong field in SIOCGIFDSTADDR |
| * Alan Cox : Device lock protection. |
| * Alan Cox : Fixed nasty side effect of device close |
| * changes. |
| * Rudi Cilibrasi : Pass the right thing to |
| * set_mac_address() |
| * Dave Miller : 32bit quantity for the device lock to |
| * make it work out on a Sparc. |
| * Bjorn Ekwall : Added KERNELD hack. |
| * Alan Cox : Cleaned up the backlog initialise. |
| * Craig Metz : SIOCGIFCONF fix if space for under |
| * 1 device. |
| * Thomas Bogendoerfer : Return ENODEV for dev_open, if there |
| * is no device open function. |
| * Andi Kleen : Fix error reporting for SIOCGIFCONF |
| * Michael Chastain : Fix signed/unsigned for SIOCGIFCONF |
| * Cyrus Durgin : Cleaned for KMOD |
| * Adam Sulmicki : Bug Fix : Network Device Unload |
| * A network device unload needs to purge |
| * the backlog queue. |
| * Paul Rusty Russell : SIOCSIFNAME |
| * Pekka Riikonen : Netdev boot-time settings code |
| * Andrew Morton : Make unregister_netdevice wait |
| * indefinitely on dev->refcnt |
| * J Hadi Salim : - Backlog queue sampling |
| * - netif_rx() feedback |
| */ |
| |
| #include <asm/uaccess.h> |
| #include <asm/system.h> |
| #include <linux/bitops.h> |
| #include <linux/capability.h> |
| #include <linux/cpu.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/hash.h> |
| #include <linux/slab.h> |
| #include <linux/sched.h> |
| #include <linux/mutex.h> |
| #include <linux/string.h> |
| #include <linux/mm.h> |
| #include <linux/socket.h> |
| #include <linux/sockios.h> |
| #include <linux/errno.h> |
| #include <linux/interrupt.h> |
| #include <linux/if_ether.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/notifier.h> |
| #include <linux/skbuff.h> |
| #include <net/net_namespace.h> |
| #include <net/sock.h> |
| #include <linux/rtnetlink.h> |
| #include <linux/proc_fs.h> |
| #include <linux/seq_file.h> |
| #include <linux/stat.h> |
| #include <linux/if_bridge.h> |
| #include <linux/if_macvlan.h> |
| #include <net/dst.h> |
| #include <net/pkt_sched.h> |
| #include <net/checksum.h> |
| #include <net/xfrm.h> |
| #include <linux/highmem.h> |
| #include <linux/init.h> |
| #include <linux/kmod.h> |
| #include <linux/module.h> |
| #include <linux/netpoll.h> |
| #include <linux/rcupdate.h> |
| #include <linux/delay.h> |
| #include <net/wext.h> |
| #include <net/iw_handler.h> |
| #include <asm/current.h> |
| #include <linux/audit.h> |
| #include <linux/dmaengine.h> |
| #include <linux/err.h> |
| #include <linux/ctype.h> |
| #include <linux/if_arp.h> |
| #include <linux/if_vlan.h> |
| #include <linux/ip.h> |
| #include <net/ip.h> |
| #include <linux/ipv6.h> |
| #include <linux/in.h> |
| #include <linux/jhash.h> |
| #include <linux/random.h> |
| #include <trace/events/napi.h> |
| #include <linux/pci.h> |
| |
| #include "net-sysfs.h" |
| |
| /* Instead of increasing this, you should create a hash table. */ |
| #define MAX_GRO_SKBS 8 |
| |
| /* This should be increased if a protocol with a bigger head is added. */ |
| #define GRO_MAX_HEAD (MAX_HEADER + 128) |
| |
| /* |
| * The list of packet types we will receive (as opposed to discard) |
| * and the routines to invoke. |
| * |
| * Why 16. Because with 16 the only overlap we get on a hash of the |
| * low nibble of the protocol value is RARP/SNAP/X.25. |
| * |
| * NOTE: That is no longer true with the addition of VLAN tags. Not |
| * sure which should go first, but I bet it won't make much |
| * difference if we are running VLANs. The good news is that |
| * this protocol won't be in the list unless compiled in, so |
| * the average user (w/out VLANs) will not be adversely affected. |
| * --BLG |
| * |
| * 0800 IP |
| * 8100 802.1Q VLAN |
| * 0001 802.3 |
| * 0002 AX.25 |
| * 0004 802.2 |
| * 8035 RARP |
| * 0005 SNAP |
| * 0805 X.25 |
| * 0806 ARP |
| * 8137 IPX |
| * 0009 Localtalk |
| * 86DD IPv6 |
| */ |
| |
| #define PTYPE_HASH_SIZE (16) |
| #define PTYPE_HASH_MASK (PTYPE_HASH_SIZE - 1) |
| |
| static DEFINE_SPINLOCK(ptype_lock); |
| static struct list_head ptype_base[PTYPE_HASH_SIZE] __read_mostly; |
| static struct list_head ptype_all __read_mostly; /* Taps */ |
| |
| /* |
| * The @dev_base_head list is protected by @dev_base_lock and the rtnl |
| * semaphore. |
| * |
| * Pure readers hold dev_base_lock for reading, or rcu_read_lock() |
| * |
| * Writers must hold the rtnl semaphore while they loop through the |
| * dev_base_head list, and hold dev_base_lock for writing when they do the |
| * actual updates. This allows pure readers to access the list even |
| * while a writer is preparing to update it. |
| * |
| * To put it another way, dev_base_lock is held for writing only to |
| * protect against pure readers; the rtnl semaphore provides the |
| * protection against other writers. |
| * |
| * See, for example usages, register_netdevice() and |
| * unregister_netdevice(), which must be called with the rtnl |
| * semaphore held. |
| */ |
| DEFINE_RWLOCK(dev_base_lock); |
| EXPORT_SYMBOL(dev_base_lock); |
| |
| static inline struct hlist_head *dev_name_hash(struct net *net, const char *name) |
| { |
| unsigned hash = full_name_hash(name, strnlen(name, IFNAMSIZ)); |
| return &net->dev_name_head[hash_32(hash, NETDEV_HASHBITS)]; |
| } |
| |
| static inline struct hlist_head *dev_index_hash(struct net *net, int ifindex) |
| { |
| return &net->dev_index_head[ifindex & (NETDEV_HASHENTRIES - 1)]; |
| } |
| |
| static inline void rps_lock(struct softnet_data *queue) |
| { |
| #ifdef CONFIG_RPS |
| spin_lock(&queue->input_pkt_queue.lock); |
| #endif |
| } |
| |
| static inline void rps_unlock(struct softnet_data *queue) |
| { |
| #ifdef CONFIG_RPS |
| spin_unlock(&queue->input_pkt_queue.lock); |
| #endif |
| } |
| |
| /* Device list insertion */ |
| static int list_netdevice(struct net_device *dev) |
| { |
| struct net *net = dev_net(dev); |
| |
| ASSERT_RTNL(); |
| |
| write_lock_bh(&dev_base_lock); |
| list_add_tail_rcu(&dev->dev_list, &net->dev_base_head); |
| hlist_add_head_rcu(&dev->name_hlist, dev_name_hash(net, dev->name)); |
| hlist_add_head_rcu(&dev->index_hlist, |
| dev_index_hash(net, dev->ifindex)); |
| write_unlock_bh(&dev_base_lock); |
| return 0; |
| } |
| |
| /* Device list removal |
| * caller must respect a RCU grace period before freeing/reusing dev |
| */ |
| static void unlist_netdevice(struct net_device *dev) |
| { |
| ASSERT_RTNL(); |
| |
| /* Unlink dev from the device chain */ |
| write_lock_bh(&dev_base_lock); |
| list_del_rcu(&dev->dev_list); |
| hlist_del_rcu(&dev->name_hlist); |
| hlist_del_rcu(&dev->index_hlist); |
| write_unlock_bh(&dev_base_lock); |
| } |
| |
| /* |
| * Our notifier list |
| */ |
| |
| static RAW_NOTIFIER_HEAD(netdev_chain); |
| |
| /* |
| * Device drivers call our routines to queue packets here. We empty the |
| * queue in the local softnet handler. |
| */ |
| |
| DEFINE_PER_CPU(struct softnet_data, softnet_data); |
| EXPORT_PER_CPU_SYMBOL(softnet_data); |
| |
| #ifdef CONFIG_LOCKDEP |
| /* |
| * register_netdevice() inits txq->_xmit_lock and sets lockdep class |
| * according to dev->type |
| */ |
| static const unsigned short netdev_lock_type[] = |
| {ARPHRD_NETROM, ARPHRD_ETHER, ARPHRD_EETHER, ARPHRD_AX25, |
| ARPHRD_PRONET, ARPHRD_CHAOS, ARPHRD_IEEE802, ARPHRD_ARCNET, |
| ARPHRD_APPLETLK, ARPHRD_DLCI, ARPHRD_ATM, ARPHRD_METRICOM, |
| ARPHRD_IEEE1394, ARPHRD_EUI64, ARPHRD_INFINIBAND, ARPHRD_SLIP, |
| ARPHRD_CSLIP, ARPHRD_SLIP6, ARPHRD_CSLIP6, ARPHRD_RSRVD, |
| ARPHRD_ADAPT, ARPHRD_ROSE, ARPHRD_X25, ARPHRD_HWX25, |
| ARPHRD_PPP, ARPHRD_CISCO, ARPHRD_LAPB, ARPHRD_DDCMP, |
| ARPHRD_RAWHDLC, ARPHRD_TUNNEL, ARPHRD_TUNNEL6, ARPHRD_FRAD, |
| ARPHRD_SKIP, ARPHRD_LOOPBACK, ARPHRD_LOCALTLK, ARPHRD_FDDI, |
| ARPHRD_BIF, ARPHRD_SIT, ARPHRD_IPDDP, ARPHRD_IPGRE, |
| ARPHRD_PIMREG, ARPHRD_HIPPI, ARPHRD_ASH, ARPHRD_ECONET, |
| ARPHRD_IRDA, ARPHRD_FCPP, ARPHRD_FCAL, ARPHRD_FCPL, |
| ARPHRD_FCFABRIC, ARPHRD_IEEE802_TR, ARPHRD_IEEE80211, |
| ARPHRD_IEEE80211_PRISM, ARPHRD_IEEE80211_RADIOTAP, ARPHRD_PHONET, |
| ARPHRD_PHONET_PIPE, ARPHRD_IEEE802154, |
| ARPHRD_VOID, ARPHRD_NONE}; |
| |
| static const char *const netdev_lock_name[] = |
| {"_xmit_NETROM", "_xmit_ETHER", "_xmit_EETHER", "_xmit_AX25", |
| "_xmit_PRONET", "_xmit_CHAOS", "_xmit_IEEE802", "_xmit_ARCNET", |
| "_xmit_APPLETLK", "_xmit_DLCI", "_xmit_ATM", "_xmit_METRICOM", |
| "_xmit_IEEE1394", "_xmit_EUI64", "_xmit_INFINIBAND", "_xmit_SLIP", |
| "_xmit_CSLIP", "_xmit_SLIP6", "_xmit_CSLIP6", "_xmit_RSRVD", |
| "_xmit_ADAPT", "_xmit_ROSE", "_xmit_X25", "_xmit_HWX25", |
| "_xmit_PPP", "_xmit_CISCO", "_xmit_LAPB", "_xmit_DDCMP", |
| "_xmit_RAWHDLC", "_xmit_TUNNEL", "_xmit_TUNNEL6", "_xmit_FRAD", |
| "_xmit_SKIP", "_xmit_LOOPBACK", "_xmit_LOCALTLK", "_xmit_FDDI", |
| "_xmit_BIF", "_xmit_SIT", "_xmit_IPDDP", "_xmit_IPGRE", |
| "_xmit_PIMREG", "_xmit_HIPPI", "_xmit_ASH", "_xmit_ECONET", |
| "_xmit_IRDA", "_xmit_FCPP", "_xmit_FCAL", "_xmit_FCPL", |
| "_xmit_FCFABRIC", "_xmit_IEEE802_TR", "_xmit_IEEE80211", |
| "_xmit_IEEE80211_PRISM", "_xmit_IEEE80211_RADIOTAP", "_xmit_PHONET", |
| "_xmit_PHONET_PIPE", "_xmit_IEEE802154", |
| "_xmit_VOID", "_xmit_NONE"}; |
| |
| static struct lock_class_key netdev_xmit_lock_key[ARRAY_SIZE(netdev_lock_type)]; |
| static struct lock_class_key netdev_addr_lock_key[ARRAY_SIZE(netdev_lock_type)]; |
| |
| static inline unsigned short netdev_lock_pos(unsigned short dev_type) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(netdev_lock_type); i++) |
| if (netdev_lock_type[i] == dev_type) |
| return i; |
| /* the last key is used by default */ |
| return ARRAY_SIZE(netdev_lock_type) - 1; |
| } |
| |
| static inline void netdev_set_xmit_lockdep_class(spinlock_t *lock, |
| unsigned short dev_type) |
| { |
| int i; |
| |
| i = netdev_lock_pos(dev_type); |
| lockdep_set_class_and_name(lock, &netdev_xmit_lock_key[i], |
| netdev_lock_name[i]); |
| } |
| |
| static inline void netdev_set_addr_lockdep_class(struct net_device *dev) |
| { |
| int i; |
| |
| i = netdev_lock_pos(dev->type); |
| lockdep_set_class_and_name(&dev->addr_list_lock, |
| &netdev_addr_lock_key[i], |
| netdev_lock_name[i]); |
| } |
| #else |
| static inline void netdev_set_xmit_lockdep_class(spinlock_t *lock, |
| unsigned short dev_type) |
| { |
| } |
| static inline void netdev_set_addr_lockdep_class(struct net_device *dev) |
| { |
| } |
| #endif |
| |
| /******************************************************************************* |
| |
| Protocol management and registration routines |
| |
| *******************************************************************************/ |
| |
| /* |
| * Add a protocol ID to the list. Now that the input handler is |
| * smarter we can dispense with all the messy stuff that used to be |
| * here. |
| * |
| * BEWARE!!! Protocol handlers, mangling input packets, |
| * MUST BE last in hash buckets and checking protocol handlers |
| * MUST start from promiscuous ptype_all chain in net_bh. |
| * It is true now, do not change it. |
| * Explanation follows: if protocol handler, mangling packet, will |
| * be the first on list, it is not able to sense, that packet |
| * is cloned and should be copied-on-write, so that it will |
| * change it and subsequent readers will get broken packet. |
| * --ANK (980803) |
| */ |
| |
| /** |
| * dev_add_pack - add packet handler |
| * @pt: packet type declaration |
| * |
| * Add a protocol handler to the networking stack. The passed &packet_type |
| * is linked into kernel lists and may not be freed until it has been |
| * removed from the kernel lists. |
| * |
| * This call does not sleep therefore it can not |
| * guarantee all CPU's that are in middle of receiving packets |
| * will see the new packet type (until the next received packet). |
| */ |
| |
| void dev_add_pack(struct packet_type *pt) |
| { |
| int hash; |
| |
| spin_lock_bh(&ptype_lock); |
| if (pt->type == htons(ETH_P_ALL)) |
| list_add_rcu(&pt->list, &ptype_all); |
| else { |
| hash = ntohs(pt->type) & PTYPE_HASH_MASK; |
| list_add_rcu(&pt->list, &ptype_base[hash]); |
| } |
| spin_unlock_bh(&ptype_lock); |
| } |
| EXPORT_SYMBOL(dev_add_pack); |
| |
| /** |
| * __dev_remove_pack - remove packet handler |
| * @pt: packet type declaration |
| * |
| * Remove a protocol handler that was previously added to the kernel |
| * protocol handlers by dev_add_pack(). The passed &packet_type is removed |
| * from the kernel lists and can be freed or reused once this function |
| * returns. |
| * |
| * The packet type might still be in use by receivers |
| * and must not be freed until after all the CPU's have gone |
| * through a quiescent state. |
| */ |
| void __dev_remove_pack(struct packet_type *pt) |
| { |
| struct list_head *head; |
| struct packet_type *pt1; |
| |
| spin_lock_bh(&ptype_lock); |
| |
| if (pt->type == htons(ETH_P_ALL)) |
| head = &ptype_all; |
| else |
| head = &ptype_base[ntohs(pt->type) & PTYPE_HASH_MASK]; |
| |
| list_for_each_entry(pt1, head, list) { |
| if (pt == pt1) { |
| list_del_rcu(&pt->list); |
| goto out; |
| } |
| } |
| |
| printk(KERN_WARNING "dev_remove_pack: %p not found.\n", pt); |
| out: |
| spin_unlock_bh(&ptype_lock); |
| } |
| EXPORT_SYMBOL(__dev_remove_pack); |
| |
| /** |
| * dev_remove_pack - remove packet handler |
| * @pt: packet type declaration |
| * |
| * Remove a protocol handler that was previously added to the kernel |
| * protocol handlers by dev_add_pack(). The passed &packet_type is removed |
| * from the kernel lists and can be freed or reused once this function |
| * returns. |
| * |
| * This call sleeps to guarantee that no CPU is looking at the packet |
| * type after return. |
| */ |
| void dev_remove_pack(struct packet_type *pt) |
| { |
| __dev_remove_pack(pt); |
| |
| synchronize_net(); |
| } |
| EXPORT_SYMBOL(dev_remove_pack); |
| |
| /****************************************************************************** |
| |
| Device Boot-time Settings Routines |
| |
| *******************************************************************************/ |
| |
| /* Boot time configuration table */ |
| static struct netdev_boot_setup dev_boot_setup[NETDEV_BOOT_SETUP_MAX]; |
| |
| /** |
| * netdev_boot_setup_add - add new setup entry |
| * @name: name of the device |
| * @map: configured settings for the device |
| * |
| * Adds new setup entry to the dev_boot_setup list. The function |
| * returns 0 on error and 1 on success. This is a generic routine to |
| * all netdevices. |
| */ |
| static int netdev_boot_setup_add(char *name, struct ifmap *map) |
| { |
| struct netdev_boot_setup *s; |
| int i; |
| |
| s = dev_boot_setup; |
| for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) { |
| if (s[i].name[0] == '\0' || s[i].name[0] == ' ') { |
| memset(s[i].name, 0, sizeof(s[i].name)); |
| strlcpy(s[i].name, name, IFNAMSIZ); |
| memcpy(&s[i].map, map, sizeof(s[i].map)); |
| break; |
| } |
| } |
| |
| return i >= NETDEV_BOOT_SETUP_MAX ? 0 : 1; |
| } |
| |
| /** |
| * netdev_boot_setup_check - check boot time settings |
| * @dev: the netdevice |
| * |
| * Check boot time settings for the device. |
| * The found settings are set for the device to be used |
| * later in the device probing. |
| * Returns 0 if no settings found, 1 if they are. |
| */ |
| int netdev_boot_setup_check(struct net_device *dev) |
| { |
| struct netdev_boot_setup *s = dev_boot_setup; |
| int i; |
| |
| for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) { |
| if (s[i].name[0] != '\0' && s[i].name[0] != ' ' && |
| !strcmp(dev->name, s[i].name)) { |
| dev->irq = s[i].map.irq; |
| dev->base_addr = s[i].map.base_addr; |
| dev->mem_start = s[i].map.mem_start; |
| dev->mem_end = s[i].map.mem_end; |
| return 1; |
| } |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(netdev_boot_setup_check); |
| |
| |
| /** |
| * netdev_boot_base - get address from boot time settings |
| * @prefix: prefix for network device |
| * @unit: id for network device |
| * |
| * Check boot time settings for the base address of device. |
| * The found settings are set for the device to be used |
| * later in the device probing. |
| * Returns 0 if no settings found. |
| */ |
| unsigned long netdev_boot_base(const char *prefix, int unit) |
| { |
| const struct netdev_boot_setup *s = dev_boot_setup; |
| char name[IFNAMSIZ]; |
| int i; |
| |
| sprintf(name, "%s%d", prefix, unit); |
| |
| /* |
| * If device already registered then return base of 1 |
| * to indicate not to probe for this interface |
| */ |
| if (__dev_get_by_name(&init_net, name)) |
| return 1; |
| |
| for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) |
| if (!strcmp(name, s[i].name)) |
| return s[i].map.base_addr; |
| return 0; |
| } |
| |
| /* |
| * Saves at boot time configured settings for any netdevice. |
| */ |
| int __init netdev_boot_setup(char *str) |
| { |
| int ints[5]; |
| struct ifmap map; |
| |
| str = get_options(str, ARRAY_SIZE(ints), ints); |
| if (!str || !*str) |
| return 0; |
| |
| /* Save settings */ |
| memset(&map, 0, sizeof(map)); |
| if (ints[0] > 0) |
| map.irq = ints[1]; |
| if (ints[0] > 1) |
| map.base_addr = ints[2]; |
| if (ints[0] > 2) |
| map.mem_start = ints[3]; |
| if (ints[0] > 3) |
| map.mem_end = ints[4]; |
| |
| /* Add new entry to the list */ |
| return netdev_boot_setup_add(str, &map); |
| } |
| |
| __setup("netdev=", netdev_boot_setup); |
| |
| /******************************************************************************* |
| |
| Device Interface Subroutines |
| |
| *******************************************************************************/ |
| |
| /** |
| * __dev_get_by_name - find a device by its name |
| * @net: the applicable net namespace |
| * @name: name to find |
| * |
| * Find an interface by name. Must be called under RTNL semaphore |
| * or @dev_base_lock. If the name is found a pointer to the device |
| * is returned. If the name is not found then %NULL is returned. The |
| * reference counters are not incremented so the caller must be |
| * careful with locks. |
| */ |
| |
| struct net_device *__dev_get_by_name(struct net *net, const char *name) |
| { |
| struct hlist_node *p; |
| struct net_device *dev; |
| struct hlist_head *head = dev_name_hash(net, name); |
| |
| hlist_for_each_entry(dev, p, head, name_hlist) |
| if (!strncmp(dev->name, name, IFNAMSIZ)) |
| return dev; |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(__dev_get_by_name); |
| |
| /** |
| * dev_get_by_name_rcu - find a device by its name |
| * @net: the applicable net namespace |
| * @name: name to find |
| * |
| * Find an interface by name. |
| * If the name is found a pointer to the device is returned. |
| * If the name is not found then %NULL is returned. |
| * The reference counters are not incremented so the caller must be |
| * careful with locks. The caller must hold RCU lock. |
| */ |
| |
| struct net_device *dev_get_by_name_rcu(struct net *net, const char *name) |
| { |
| struct hlist_node *p; |
| struct net_device *dev; |
| struct hlist_head *head = dev_name_hash(net, name); |
| |
| hlist_for_each_entry_rcu(dev, p, head, name_hlist) |
| if (!strncmp(dev->name, name, IFNAMSIZ)) |
| return dev; |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(dev_get_by_name_rcu); |
| |
| /** |
| * dev_get_by_name - find a device by its name |
| * @net: the applicable net namespace |
| * @name: name to find |
| * |
| * Find an interface by name. This can be called from any |
| * context and does its own locking. The returned handle has |
| * the usage count incremented and the caller must use dev_put() to |
| * release it when it is no longer needed. %NULL is returned if no |
| * matching device is found. |
| */ |
| |
| struct net_device *dev_get_by_name(struct net *net, const char *name) |
| { |
| struct net_device *dev; |
| |
| rcu_read_lock(); |
| dev = dev_get_by_name_rcu(net, name); |
| if (dev) |
| dev_hold(dev); |
| rcu_read_unlock(); |
| return dev; |
| } |
| EXPORT_SYMBOL(dev_get_by_name); |
| |
| /** |
| * __dev_get_by_index - find a device by its ifindex |
| * @net: the applicable net namespace |
| * @ifindex: index of device |
| * |
| * Search for an interface by index. Returns %NULL if the device |
| * is not found or a pointer to the device. The device has not |
| * had its reference counter increased so the caller must be careful |
| * about locking. The caller must hold either the RTNL semaphore |
| * or @dev_base_lock. |
| */ |
| |
| struct net_device *__dev_get_by_index(struct net *net, int ifindex) |
| { |
| struct hlist_node *p; |
| struct net_device *dev; |
| struct hlist_head *head = dev_index_hash(net, ifindex); |
| |
| hlist_for_each_entry(dev, p, head, index_hlist) |
| if (dev->ifindex == ifindex) |
| return dev; |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(__dev_get_by_index); |
| |
| /** |
| * dev_get_by_index_rcu - find a device by its ifindex |
| * @net: the applicable net namespace |
| * @ifindex: index of device |
| * |
| * Search for an interface by index. Returns %NULL if the device |
| * is not found or a pointer to the device. The device has not |
| * had its reference counter increased so the caller must be careful |
| * about locking. The caller must hold RCU lock. |
| */ |
| |
| struct net_device *dev_get_by_index_rcu(struct net *net, int ifindex) |
| { |
| struct hlist_node *p; |
| struct net_device *dev; |
| struct hlist_head *head = dev_index_hash(net, ifindex); |
| |
| hlist_for_each_entry_rcu(dev, p, head, index_hlist) |
| if (dev->ifindex == ifindex) |
| return dev; |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(dev_get_by_index_rcu); |
| |
| |
| /** |
| * dev_get_by_index - find a device by its ifindex |
| * @net: the applicable net namespace |
| * @ifindex: index of device |
| * |
| * Search for an interface by index. Returns NULL if the device |
| * is not found or a pointer to the device. The device returned has |
| * had a reference added and the pointer is safe until the user calls |
| * dev_put to indicate they have finished with it. |
| */ |
| |
| struct net_device *dev_get_by_index(struct net *net, int ifindex) |
| { |
| struct net_device *dev; |
| |
| rcu_read_lock(); |
| dev = dev_get_by_index_rcu(net, ifindex); |
| if (dev) |
| dev_hold(dev); |
| rcu_read_unlock(); |
| return dev; |
| } |
| EXPORT_SYMBOL(dev_get_by_index); |
| |
| /** |
| * dev_getbyhwaddr - find a device by its hardware address |
| * @net: the applicable net namespace |
| * @type: media type of device |
| * @ha: hardware address |
| * |
| * Search for an interface by MAC address. Returns NULL if the device |
| * is not found or a pointer to the device. The caller must hold the |
| * rtnl semaphore. The returned device has not had its ref count increased |
| * and the caller must therefore be careful about locking |
| * |
| * BUGS: |
| * If the API was consistent this would be __dev_get_by_hwaddr |
| */ |
| |
| struct net_device *dev_getbyhwaddr(struct net *net, unsigned short type, char *ha) |
| { |
| struct net_device *dev; |
| |
| ASSERT_RTNL(); |
| |
| for_each_netdev(net, dev) |
| if (dev->type == type && |
| !memcmp(dev->dev_addr, ha, dev->addr_len)) |
| return dev; |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(dev_getbyhwaddr); |
| |
| struct net_device *__dev_getfirstbyhwtype(struct net *net, unsigned short type) |
| { |
| struct net_device *dev; |
| |
| ASSERT_RTNL(); |
| for_each_netdev(net, dev) |
| if (dev->type == type) |
| return dev; |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(__dev_getfirstbyhwtype); |
| |
| struct net_device *dev_getfirstbyhwtype(struct net *net, unsigned short type) |
| { |
| struct net_device *dev, *ret = NULL; |
| |
| rcu_read_lock(); |
| for_each_netdev_rcu(net, dev) |
| if (dev->type == type) { |
| dev_hold(dev); |
| ret = dev; |
| break; |
| } |
| rcu_read_unlock(); |
| return ret; |
| } |
| EXPORT_SYMBOL(dev_getfirstbyhwtype); |
| |
| /** |
| * dev_get_by_flags - find any device with given flags |
| * @net: the applicable net namespace |
| * @if_flags: IFF_* values |
| * @mask: bitmask of bits in if_flags to check |
| * |
| * Search for any interface with the given flags. Returns NULL if a device |
| * is not found or a pointer to the device. The device returned has |
| * had a reference added and the pointer is safe until the user calls |
| * dev_put to indicate they have finished with it. |
| */ |
| |
| struct net_device *dev_get_by_flags(struct net *net, unsigned short if_flags, |
| unsigned short mask) |
| { |
| struct net_device *dev, *ret; |
| |
| ret = NULL; |
| rcu_read_lock(); |
| for_each_netdev_rcu(net, dev) { |
| if (((dev->flags ^ if_flags) & mask) == 0) { |
| dev_hold(dev); |
| ret = dev; |
| break; |
| } |
| } |
| rcu_read_unlock(); |
| return ret; |
| } |
| EXPORT_SYMBOL(dev_get_by_flags); |
| |
| /** |
| * dev_valid_name - check if name is okay for network device |
| * @name: name string |
| * |
| * Network device names need to be valid file names to |
| * to allow sysfs to work. We also disallow any kind of |
| * whitespace. |
| */ |
| int dev_valid_name(const char *name) |
| { |
| if (*name == '\0') |
| return 0; |
| if (strlen(name) >= IFNAMSIZ) |
| return 0; |
| if (!strcmp(name, ".") || !strcmp(name, "..")) |
| return 0; |
| |
| while (*name) { |
| if (*name == '/' || isspace(*name)) |
| return 0; |
| name++; |
| } |
| return 1; |
| } |
| EXPORT_SYMBOL(dev_valid_name); |
| |
| /** |
| * __dev_alloc_name - allocate a name for a device |
| * @net: network namespace to allocate the device name in |
| * @name: name format string |
| * @buf: scratch buffer and result name string |
| * |
| * Passed a format string - eg "lt%d" it will try and find a suitable |
| * id. It scans list of devices to build up a free map, then chooses |
| * the first empty slot. The caller must hold the dev_base or rtnl lock |
| * while allocating the name and adding the device in order to avoid |
| * duplicates. |
| * Limited to bits_per_byte * page size devices (ie 32K on most platforms). |
| * Returns the number of the unit assigned or a negative errno code. |
| */ |
| |
| static int __dev_alloc_name(struct net *net, const char *name, char *buf) |
| { |
| int i = 0; |
| const char *p; |
| const int max_netdevices = 8*PAGE_SIZE; |
| unsigned long *inuse; |
| struct net_device *d; |
| |
| p = strnchr(name, IFNAMSIZ-1, '%'); |
| if (p) { |
| /* |
| * Verify the string as this thing may have come from |
| * the user. There must be either one "%d" and no other "%" |
| * characters. |
| */ |
| if (p[1] != 'd' || strchr(p + 2, '%')) |
| return -EINVAL; |
| |
| /* Use one page as a bit array of possible slots */ |
| inuse = (unsigned long *) get_zeroed_page(GFP_ATOMIC); |
| if (!inuse) |
| return -ENOMEM; |
| |
| for_each_netdev(net, d) { |
| if (!sscanf(d->name, name, &i)) |
| continue; |
| if (i < 0 || i >= max_netdevices) |
| continue; |
| |
| /* avoid cases where sscanf is not exact inverse of printf */ |
| snprintf(buf, IFNAMSIZ, name, i); |
| if (!strncmp(buf, d->name, IFNAMSIZ)) |
| set_bit(i, inuse); |
| } |
| |
| i = find_first_zero_bit(inuse, max_netdevices); |
| free_page((unsigned long) inuse); |
| } |
| |
| if (buf != name) |
| snprintf(buf, IFNAMSIZ, name, i); |
| if (!__dev_get_by_name(net, buf)) |
| return i; |
| |
| /* It is possible to run out of possible slots |
| * when the name is long and there isn't enough space left |
| * for the digits, or if all bits are used. |
| */ |
| return -ENFILE; |
| } |
| |
| /** |
| * dev_alloc_name - allocate a name for a device |
| * @dev: device |
| * @name: name format string |
| * |
| * Passed a format string - eg "lt%d" it will try and find a suitable |
| * id. It scans list of devices to build up a free map, then chooses |
| * the first empty slot. The caller must hold the dev_base or rtnl lock |
| * while allocating the name and adding the device in order to avoid |
| * duplicates. |
| * Limited to bits_per_byte * page size devices (ie 32K on most platforms). |
| * Returns the number of the unit assigned or a negative errno code. |
| */ |
| |
| int dev_alloc_name(struct net_device *dev, const char *name) |
| { |
| char buf[IFNAMSIZ]; |
| struct net *net; |
| int ret; |
| |
| BUG_ON(!dev_net(dev)); |
| net = dev_net(dev); |
| ret = __dev_alloc_name(net, name, buf); |
| if (ret >= 0) |
| strlcpy(dev->name, buf, IFNAMSIZ); |
| return ret; |
| } |
| EXPORT_SYMBOL(dev_alloc_name); |
| |
| static int dev_get_valid_name(struct net *net, const char *name, char *buf, |
| bool fmt) |
| { |
| if (!dev_valid_name(name)) |
| return -EINVAL; |
| |
| if (fmt && strchr(name, '%')) |
| return __dev_alloc_name(net, name, buf); |
| else if (__dev_get_by_name(net, name)) |
| return -EEXIST; |
| else if (buf != name) |
| strlcpy(buf, name, IFNAMSIZ); |
| |
| return 0; |
| } |
| |
| /** |
| * dev_change_name - change name of a device |
| * @dev: device |
| * @newname: name (or format string) must be at least IFNAMSIZ |
| * |
| * Change name of a device, can pass format strings "eth%d". |
| * for wildcarding. |
| */ |
| int dev_change_name(struct net_device *dev, const char *newname) |
| { |
| char oldname[IFNAMSIZ]; |
| int err = 0; |
| int ret; |
| struct net *net; |
| |
| ASSERT_RTNL(); |
| BUG_ON(!dev_net(dev)); |
| |
| net = dev_net(dev); |
| if (dev->flags & IFF_UP) |
| return -EBUSY; |
| |
| if (strncmp(newname, dev->name, IFNAMSIZ) == 0) |
| return 0; |
| |
| memcpy(oldname, dev->name, IFNAMSIZ); |
| |
| err = dev_get_valid_name(net, newname, dev->name, 1); |
| if (err < 0) |
| return err; |
| |
| rollback: |
| /* For now only devices in the initial network namespace |
| * are in sysfs. |
| */ |
| if (net_eq(net, &init_net)) { |
| ret = device_rename(&dev->dev, dev->name); |
| if (ret) { |
| memcpy(dev->name, oldname, IFNAMSIZ); |
| return ret; |
| } |
| } |
| |
| write_lock_bh(&dev_base_lock); |
| hlist_del(&dev->name_hlist); |
| write_unlock_bh(&dev_base_lock); |
| |
| synchronize_rcu(); |
| |
| write_lock_bh(&dev_base_lock); |
| hlist_add_head_rcu(&dev->name_hlist, dev_name_hash(net, dev->name)); |
| write_unlock_bh(&dev_base_lock); |
| |
| ret = call_netdevice_notifiers(NETDEV_CHANGENAME, dev); |
| ret = notifier_to_errno(ret); |
| |
| if (ret) { |
| /* err >= 0 after dev_alloc_name() or stores the first errno */ |
| if (err >= 0) { |
| err = ret; |
| memcpy(dev->name, oldname, IFNAMSIZ); |
| goto rollback; |
| } else { |
| printk(KERN_ERR |
| "%s: name change rollback failed: %d.\n", |
| dev->name, ret); |
| } |
| } |
| |
| return err; |
| } |
| |
| /** |
| * dev_set_alias - change ifalias of a device |
| * @dev: device |
| * @alias: name up to IFALIASZ |
| * @len: limit of bytes to copy from info |
| * |
| * Set ifalias for a device, |
| */ |
| int dev_set_alias(struct net_device *dev, const char *alias, size_t len) |
| { |
| ASSERT_RTNL(); |
| |
| if (len >= IFALIASZ) |
| return -EINVAL; |
| |
| if (!len) { |
| if (dev->ifalias) { |
| kfree(dev->ifalias); |
| dev->ifalias = NULL; |
| } |
| return 0; |
| } |
| |
| dev->ifalias = krealloc(dev->ifalias, len + 1, GFP_KERNEL); |
| if (!dev->ifalias) |
| return -ENOMEM; |
| |
| strlcpy(dev->ifalias, alias, len+1); |
| return len; |
| } |
| |
| |
| /** |
| * netdev_features_change - device changes features |
| * @dev: device to cause notification |
| * |
| * Called to indicate a device has changed features. |
| */ |
| void netdev_features_change(struct net_device *dev) |
| { |
| call_netdevice_notifiers(NETDEV_FEAT_CHANGE, dev); |
| } |
| EXPORT_SYMBOL(netdev_features_change); |
| |
| /** |
| * netdev_state_change - device changes state |
| * @dev: device to cause notification |
| * |
| * Called to indicate a device has changed state. This function calls |
| * the notifier chains for netdev_chain and sends a NEWLINK message |
| * to the routing socket. |
| */ |
| void netdev_state_change(struct net_device *dev) |
| { |
| if (dev->flags & IFF_UP) { |
| call_netdevice_notifiers(NETDEV_CHANGE, dev); |
| rtmsg_ifinfo(RTM_NEWLINK, dev, 0); |
| } |
| } |
| EXPORT_SYMBOL(netdev_state_change); |
| |
| int netdev_bonding_change(struct net_device *dev, unsigned long event) |
| { |
| return call_netdevice_notifiers(event, dev); |
| } |
| EXPORT_SYMBOL(netdev_bonding_change); |
| |
| /** |
| * dev_load - load a network module |
| * @net: the applicable net namespace |
| * @name: name of interface |
| * |
| * If a network interface is not present and the process has suitable |
| * privileges this function loads the module. If module loading is not |
| * available in this kernel then it becomes a nop. |
| */ |
| |
| void dev_load(struct net *net, const char *name) |
| { |
| struct net_device *dev; |
| |
| rcu_read_lock(); |
| dev = dev_get_by_name_rcu(net, name); |
| rcu_read_unlock(); |
| |
| if (!dev && capable(CAP_NET_ADMIN)) |
| request_module("%s", name); |
| } |
| EXPORT_SYMBOL(dev_load); |
| |
| static int __dev_open(struct net_device *dev) |
| { |
| const struct net_device_ops *ops = dev->netdev_ops; |
| int ret; |
| |
| ASSERT_RTNL(); |
| |
| /* |
| * Is it even present? |
| */ |
| if (!netif_device_present(dev)) |
| return -ENODEV; |
| |
| ret = call_netdevice_notifiers(NETDEV_PRE_UP, dev); |
| ret = notifier_to_errno(ret); |
| if (ret) |
| return ret; |
| |
| /* |
| * Call device private open method |
| */ |
| set_bit(__LINK_STATE_START, &dev->state); |
| |
| if (ops->ndo_validate_addr) |
| ret = ops->ndo_validate_addr(dev); |
| |
| if (!ret && ops->ndo_open) |
| ret = ops->ndo_open(dev); |
| |
| /* |
| * If it went open OK then: |
| */ |
| |
| if (ret) |
| clear_bit(__LINK_STATE_START, &dev->state); |
| else { |
| /* |
| * Set the flags. |
| */ |
| dev->flags |= IFF_UP; |
| |
| /* |
| * Enable NET_DMA |
| */ |
| net_dmaengine_get(); |
| |
| /* |
| * Initialize multicasting status |
| */ |
| dev_set_rx_mode(dev); |
| |
| /* |
| * Wakeup transmit queue engine |
| */ |
| dev_activate(dev); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * dev_open - prepare an interface for use. |
| * @dev: device to open |
| * |
| * Takes a device from down to up state. The device's private open |
| * function is invoked and then the multicast lists are loaded. Finally |
| * the device is moved into the up state and a %NETDEV_UP message is |
| * sent to the netdev notifier chain. |
| * |
| * Calling this function on an active interface is a nop. On a failure |
| * a negative errno code is returned. |
| */ |
| int dev_open(struct net_device *dev) |
| { |
| int ret; |
| |
| /* |
| * Is it already up? |
| */ |
| if (dev->flags & IFF_UP) |
| return 0; |
| |
| /* |
| * Open device |
| */ |
| ret = __dev_open(dev); |
| if (ret < 0) |
| return ret; |
| |
| /* |
| * ... and announce new interface. |
| */ |
| rtmsg_ifinfo(RTM_NEWLINK, dev, IFF_UP|IFF_RUNNING); |
| call_netdevice_notifiers(NETDEV_UP, dev); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(dev_open); |
| |
| static int __dev_close(struct net_device *dev) |
| { |
| const struct net_device_ops *ops = dev->netdev_ops; |
| |
| ASSERT_RTNL(); |
| might_sleep(); |
| |
| /* |
| * Tell people we are going down, so that they can |
| * prepare to death, when device is still operating. |
| */ |
| call_netdevice_notifiers(NETDEV_GOING_DOWN, dev); |
| |
| clear_bit(__LINK_STATE_START, &dev->state); |
| |
| /* Synchronize to scheduled poll. We cannot touch poll list, |
| * it can be even on different cpu. So just clear netif_running(). |
| * |
| * dev->stop() will invoke napi_disable() on all of it's |
| * napi_struct instances on this device. |
| */ |
| smp_mb__after_clear_bit(); /* Commit netif_running(). */ |
| |
| dev_deactivate(dev); |
| |
| /* |
| * Call the device specific close. This cannot fail. |
| * Only if device is UP |
| * |
| * We allow it to be called even after a DETACH hot-plug |
| * event. |
| */ |
| if (ops->ndo_stop) |
| ops->ndo_stop(dev); |
| |
| /* |
| * Device is now down. |
| */ |
| |
| dev->flags &= ~IFF_UP; |
| |
| /* |
| * Shutdown NET_DMA |
| */ |
| net_dmaengine_put(); |
| |
| return 0; |
| } |
| |
| /** |
| * dev_close - shutdown an interface. |
| * @dev: device to shutdown |
| * |
| * This function moves an active device into down state. A |
| * %NETDEV_GOING_DOWN is sent to the netdev notifier chain. The device |
| * is then deactivated and finally a %NETDEV_DOWN is sent to the notifier |
| * chain. |
| */ |
| int dev_close(struct net_device *dev) |
| { |
| if (!(dev->flags & IFF_UP)) |
| return 0; |
| |
| __dev_close(dev); |
| |
| /* |
| * Tell people we are down |
| */ |
| rtmsg_ifinfo(RTM_NEWLINK, dev, IFF_UP|IFF_RUNNING); |
| call_netdevice_notifiers(NETDEV_DOWN, dev); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(dev_close); |
| |
| |
| /** |
| * dev_disable_lro - disable Large Receive Offload on a device |
| * @dev: device |
| * |
| * Disable Large Receive Offload (LRO) on a net device. Must be |
| * called under RTNL. This is needed if received packets may be |
| * forwarded to another interface. |
| */ |
| void dev_disable_lro(struct net_device *dev) |
| { |
| if (dev->ethtool_ops && dev->ethtool_ops->get_flags && |
| dev->ethtool_ops->set_flags) { |
| u32 flags = dev->ethtool_ops->get_flags(dev); |
| if (flags & ETH_FLAG_LRO) { |
| flags &= ~ETH_FLAG_LRO; |
| dev->ethtool_ops->set_flags(dev, flags); |
| } |
| } |
| WARN_ON(dev->features & NETIF_F_LRO); |
| } |
| EXPORT_SYMBOL(dev_disable_lro); |
| |
| |
| static int dev_boot_phase = 1; |
| |
| /* |
| * Device change register/unregister. These are not inline or static |
| * as we export them to the world. |
| */ |
| |
| /** |
| * register_netdevice_notifier - register a network notifier block |
| * @nb: notifier |
| * |
| * Register a notifier to be called when network device events occur. |
| * The notifier passed is linked into the kernel structures and must |
| * not be reused until it has been unregistered. A negative errno code |
| * is returned on a failure. |
| * |
| * When registered all registration and up events are replayed |
| * to the new notifier to allow device to have a race free |
| * view of the network device list. |
| */ |
| |
| int register_netdevice_notifier(struct notifier_block *nb) |
| { |
| struct net_device *dev; |
| struct net_device *last; |
| struct net *net; |
| int err; |
| |
| rtnl_lock(); |
| err = raw_notifier_chain_register(&netdev_chain, nb); |
| if (err) |
| goto unlock; |
| if (dev_boot_phase) |
| goto unlock; |
| for_each_net(net) { |
| for_each_netdev(net, dev) { |
| err = nb->notifier_call(nb, NETDEV_REGISTER, dev); |
| err = notifier_to_errno(err); |
| if (err) |
| goto rollback; |
| |
| if (!(dev->flags & IFF_UP)) |
| continue; |
| |
| nb->notifier_call(nb, NETDEV_UP, dev); |
| } |
| } |
| |
| unlock: |
| rtnl_unlock(); |
| return err; |
| |
| rollback: |
| last = dev; |
| for_each_net(net) { |
| for_each_netdev(net, dev) { |
| if (dev == last) |
| break; |
| |
| if (dev->flags & IFF_UP) { |
| nb->notifier_call(nb, NETDEV_GOING_DOWN, dev); |
| nb->notifier_call(nb, NETDEV_DOWN, dev); |
| } |
| nb->notifier_call(nb, NETDEV_UNREGISTER, dev); |
| nb->notifier_call(nb, NETDEV_UNREGISTER_BATCH, dev); |
| } |
| } |
| |
| raw_notifier_chain_unregister(&netdev_chain, nb); |
| goto unlock; |
| } |
| EXPORT_SYMBOL(register_netdevice_notifier); |
| |
| /** |
| * unregister_netdevice_notifier - unregister a network notifier block |
| * @nb: notifier |
| * |
| * Unregister a notifier previously registered by |
| * register_netdevice_notifier(). The notifier is unlinked into the |
| * kernel structures and may then be reused. A negative errno code |
| * is returned on a failure. |
| */ |
| |
| int unregister_netdevice_notifier(struct notifier_block *nb) |
| { |
| int err; |
| |
| rtnl_lock(); |
| err = raw_notifier_chain_unregister(&netdev_chain, nb); |
| rtnl_unlock(); |
| return err; |
| } |
| EXPORT_SYMBOL(unregister_netdevice_notifier); |
| |
| /** |
| * call_netdevice_notifiers - call all network notifier blocks |
| * @val: value passed unmodified to notifier function |
| * @dev: net_device pointer passed unmodified to notifier function |
| * |
| * Call all network notifier blocks. Parameters and return value |
| * are as for raw_notifier_call_chain(). |
| */ |
| |
| int call_netdevice_notifiers(unsigned long val, struct net_device *dev) |
| { |
| return raw_notifier_call_chain(&netdev_chain, val, dev); |
| } |
| |
| /* When > 0 there are consumers of rx skb time stamps */ |
| static atomic_t netstamp_needed = ATOMIC_INIT(0); |
| |
| void net_enable_timestamp(void) |
| { |
| atomic_inc(&netstamp_needed); |
| } |
| EXPORT_SYMBOL(net_enable_timestamp); |
| |
| void net_disable_timestamp(void) |
| { |
| atomic_dec(&netstamp_needed); |
| } |
| EXPORT_SYMBOL(net_disable_timestamp); |
| |
| static inline void net_timestamp(struct sk_buff *skb) |
| { |
| if (atomic_read(&netstamp_needed)) |
| __net_timestamp(skb); |
| else |
| skb->tstamp.tv64 = 0; |
| } |
| |
| /** |
| * dev_forward_skb - loopback an skb to another netif |
| * |
| * @dev: destination network device |
| * @skb: buffer to forward |
| * |
| * return values: |
| * NET_RX_SUCCESS (no congestion) |
| * NET_RX_DROP (packet was dropped) |
| * |
| * dev_forward_skb can be used for injecting an skb from the |
| * start_xmit function of one device into the receive queue |
| * of another device. |
| * |
| * The receiving device may be in another namespace, so |
| * we have to clear all information in the skb that could |
| * impact namespace isolation. |
| */ |
| int dev_forward_skb(struct net_device *dev, struct sk_buff *skb) |
| { |
| skb_orphan(skb); |
| |
| if (!(dev->flags & IFF_UP)) |
| return NET_RX_DROP; |
| |
| if (skb->len > (dev->mtu + dev->hard_header_len)) |
| return NET_RX_DROP; |
| |
| skb_set_dev(skb, dev); |
| skb->tstamp.tv64 = 0; |
| skb->pkt_type = PACKET_HOST; |
| skb->protocol = eth_type_trans(skb, dev); |
| return netif_rx(skb); |
| } |
| EXPORT_SYMBOL_GPL(dev_forward_skb); |
| |
| /* |
| * Support routine. Sends outgoing frames to any network |
| * taps currently in use. |
| */ |
| |
| static void dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct packet_type *ptype; |
| |
| #ifdef CONFIG_NET_CLS_ACT |
| if (!(skb->tstamp.tv64 && (G_TC_FROM(skb->tc_verd) & AT_INGRESS))) |
| net_timestamp(skb); |
| #else |
| net_timestamp(skb); |
| #endif |
| |
| rcu_read_lock(); |
| list_for_each_entry_rcu(ptype, &ptype_all, list) { |
| /* Never send packets back to the socket |
| * they originated from - MvS (miquels@drinkel.ow.org) |
| */ |
| if ((ptype->dev == dev || !ptype->dev) && |
| (ptype->af_packet_priv == NULL || |
| (struct sock *)ptype->af_packet_priv != skb->sk)) { |
| struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC); |
| if (!skb2) |
| break; |
| |
| /* skb->nh should be correctly |
| set by sender, so that the second statement is |
| just protection against buggy protocols. |
| */ |
| skb_reset_mac_header(skb2); |
| |
| if (skb_network_header(skb2) < skb2->data || |
| skb2->network_header > skb2->tail) { |
| if (net_ratelimit()) |
| printk(KERN_CRIT "protocol %04x is " |
| "buggy, dev %s\n", |
| skb2->protocol, dev->name); |
| skb_reset_network_header(skb2); |
| } |
| |
| skb2->transport_header = skb2->network_header; |
| skb2->pkt_type = PACKET_OUTGOING; |
| ptype->func(skb2, skb->dev, ptype, skb->dev); |
| } |
| } |
| rcu_read_unlock(); |
| } |
| |
| |
| static inline void __netif_reschedule(struct Qdisc *q) |
| { |
| struct softnet_data *sd; |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| sd = &__get_cpu_var(softnet_data); |
| q->next_sched = sd->output_queue; |
| sd->output_queue = q; |
| raise_softirq_irqoff(NET_TX_SOFTIRQ); |
| local_irq_restore(flags); |
| } |
| |
| void __netif_schedule(struct Qdisc *q) |
| { |
| if (!test_and_set_bit(__QDISC_STATE_SCHED, &q->state)) |
| __netif_reschedule(q); |
| } |
| EXPORT_SYMBOL(__netif_schedule); |
| |
| void dev_kfree_skb_irq(struct sk_buff *skb) |
| { |
| if (atomic_dec_and_test(&skb->users)) { |
| struct softnet_data *sd; |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| sd = &__get_cpu_var(softnet_data); |
| skb->next = sd->completion_queue; |
| sd->completion_queue = skb; |
| raise_softirq_irqoff(NET_TX_SOFTIRQ); |
| local_irq_restore(flags); |
| } |
| } |
| EXPORT_SYMBOL(dev_kfree_skb_irq); |
| |
| void dev_kfree_skb_any(struct sk_buff *skb) |
| { |
| if (in_irq() || irqs_disabled()) |
| dev_kfree_skb_irq(skb); |
| else |
| dev_kfree_skb(skb); |
| } |
| EXPORT_SYMBOL(dev_kfree_skb_any); |
| |
| |
| /** |
| * netif_device_detach - mark device as removed |
| * @dev: network device |
| * |
| * Mark device as removed from system and therefore no longer available. |
| */ |
| void netif_device_detach(struct net_device *dev) |
| { |
| if (test_and_clear_bit(__LINK_STATE_PRESENT, &dev->state) && |
| netif_running(dev)) { |
| netif_tx_stop_all_queues(dev); |
| } |
| } |
| EXPORT_SYMBOL(netif_device_detach); |
| |
| /** |
| * netif_device_attach - mark device as attached |
| * @dev: network device |
| * |
| * Mark device as attached from system and restart if needed. |
| */ |
| void netif_device_attach(struct net_device *dev) |
| { |
| if (!test_and_set_bit(__LINK_STATE_PRESENT, &dev->state) && |
| netif_running(dev)) { |
| netif_tx_wake_all_queues(dev); |
| __netdev_watchdog_up(dev); |
| } |
| } |
| EXPORT_SYMBOL(netif_device_attach); |
| |
| static bool can_checksum_protocol(unsigned long features, __be16 protocol) |
| { |
| return ((features & NETIF_F_GEN_CSUM) || |
| ((features & NETIF_F_IP_CSUM) && |
| protocol == htons(ETH_P_IP)) || |
| ((features & NETIF_F_IPV6_CSUM) && |
| protocol == htons(ETH_P_IPV6)) || |
| ((features & NETIF_F_FCOE_CRC) && |
| protocol == htons(ETH_P_FCOE))); |
| } |
| |
| static bool dev_can_checksum(struct net_device *dev, struct sk_buff *skb) |
| { |
| if (can_checksum_protocol(dev->features, skb->protocol)) |
| return true; |
| |
| if (skb->protocol == htons(ETH_P_8021Q)) { |
| struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data; |
| if (can_checksum_protocol(dev->features & dev->vlan_features, |
| veh->h_vlan_encapsulated_proto)) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| /** |
| * skb_dev_set -- assign a new device to a buffer |
| * @skb: buffer for the new device |
| * @dev: network device |
| * |
| * If an skb is owned by a device already, we have to reset |
| * all data private to the namespace a device belongs to |
| * before assigning it a new device. |
| */ |
| #ifdef CONFIG_NET_NS |
| void skb_set_dev(struct sk_buff *skb, struct net_device *dev) |
| { |
| skb_dst_drop(skb); |
| if (skb->dev && !net_eq(dev_net(skb->dev), dev_net(dev))) { |
| secpath_reset(skb); |
| nf_reset(skb); |
| skb_init_secmark(skb); |
| skb->mark = 0; |
| skb->priority = 0; |
| skb->nf_trace = 0; |
| skb->ipvs_property = 0; |
| #ifdef CONFIG_NET_SCHED |
| skb->tc_index = 0; |
| #endif |
| } |
| skb->dev = dev; |
| } |
| EXPORT_SYMBOL(skb_set_dev); |
| #endif /* CONFIG_NET_NS */ |
| |
| /* |
| * Invalidate hardware checksum when packet is to be mangled, and |
| * complete checksum manually on outgoing path. |
| */ |
| int skb_checksum_help(struct sk_buff *skb) |
| { |
| __wsum csum; |
| int ret = 0, offset; |
| |
| if (skb->ip_summed == CHECKSUM_COMPLETE) |
| goto out_set_summed; |
| |
| if (unlikely(skb_shinfo(skb)->gso_size)) { |
| /* Let GSO fix up the checksum. */ |
| goto out_set_summed; |
| } |
| |
| offset = skb->csum_start - skb_headroom(skb); |
| BUG_ON(offset >= skb_headlen(skb)); |
| csum = skb_checksum(skb, offset, skb->len - offset, 0); |
| |
| offset += skb->csum_offset; |
| BUG_ON(offset + sizeof(__sum16) > skb_headlen(skb)); |
| |
| if (skb_cloned(skb) && |
| !skb_clone_writable(skb, offset + sizeof(__sum16))) { |
| ret = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); |
| if (ret) |
| goto out; |
| } |
| |
| *(__sum16 *)(skb->data + offset) = csum_fold(csum); |
| out_set_summed: |
| skb->ip_summed = CHECKSUM_NONE; |
| out: |
| return ret; |
| } |
| EXPORT_SYMBOL(skb_checksum_help); |
| |
| /** |
| * skb_gso_segment - Perform segmentation on skb. |
| * @skb: buffer to segment |
| * @features: features for the output path (see dev->features) |
| * |
| * This function segments the given skb and returns a list of segments. |
| * |
| * It may return NULL if the skb requires no segmentation. This is |
| * only possible when GSO is used for verifying header integrity. |
| */ |
| struct sk_buff *skb_gso_segment(struct sk_buff *skb, int features) |
| { |
| struct sk_buff *segs = ERR_PTR(-EPROTONOSUPPORT); |
| struct packet_type *ptype; |
| __be16 type = skb->protocol; |
| int err; |
| |
| skb_reset_mac_header(skb); |
| skb->mac_len = skb->network_header - skb->mac_header; |
| __skb_pull(skb, skb->mac_len); |
| |
| if (unlikely(skb->ip_summed != CHECKSUM_PARTIAL)) { |
| struct net_device *dev = skb->dev; |
| struct ethtool_drvinfo info = {}; |
| |
| if (dev && dev->ethtool_ops && dev->ethtool_ops->get_drvinfo) |
| dev->ethtool_ops->get_drvinfo(dev, &info); |
| |
| WARN(1, "%s: caps=(0x%lx, 0x%lx) len=%d data_len=%d " |
| "ip_summed=%d", |
| info.driver, dev ? dev->features : 0L, |
| skb->sk ? skb->sk->sk_route_caps : 0L, |
| skb->len, skb->data_len, skb->ip_summed); |
| |
| if (skb_header_cloned(skb) && |
| (err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC))) |
| return ERR_PTR(err); |
| } |
| |
| rcu_read_lock(); |
| list_for_each_entry_rcu(ptype, |
| &ptype_base[ntohs(type) & PTYPE_HASH_MASK], list) { |
| if (ptype->type == type && !ptype->dev && ptype->gso_segment) { |
| if (unlikely(skb->ip_summed != CHECKSUM_PARTIAL)) { |
| err = ptype->gso_send_check(skb); |
| segs = ERR_PTR(err); |
| if (err || skb_gso_ok(skb, features)) |
| break; |
| __skb_push(skb, (skb->data - |
| skb_network_header(skb))); |
| } |
| segs = ptype->gso_segment(skb, features); |
| break; |
| } |
| } |
| rcu_read_unlock(); |
| |
| __skb_push(skb, skb->data - skb_mac_header(skb)); |
| |
| return segs; |
| } |
| EXPORT_SYMBOL(skb_gso_segment); |
| |
| /* Take action when hardware reception checksum errors are detected. */ |
| #ifdef CONFIG_BUG |
| void netdev_rx_csum_fault(struct net_device *dev) |
| { |
| if (net_ratelimit()) { |
| printk(KERN_ERR "%s: hw csum failure.\n", |
| dev ? dev->name : "<unknown>"); |
| dump_stack(); |
| } |
| } |
| EXPORT_SYMBOL(netdev_rx_csum_fault); |
| #endif |
| |
| /* Actually, we should eliminate this check as soon as we know, that: |
| * 1. IOMMU is present and allows to map all the memory. |
| * 2. No high memory really exists on this machine. |
| */ |
| |
| static int illegal_highdma(struct net_device *dev, struct sk_buff *skb) |
| { |
| #ifdef CONFIG_HIGHMEM |
| int i; |
| if (!(dev->features & NETIF_F_HIGHDMA)) { |
| for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) |
| if (PageHighMem(skb_shinfo(skb)->frags[i].page)) |
| return 1; |
| } |
| |
| if (PCI_DMA_BUS_IS_PHYS) { |
| struct device *pdev = dev->dev.parent; |
| |
| if (!pdev) |
| return 0; |
| for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { |
| dma_addr_t addr = page_to_phys(skb_shinfo(skb)->frags[i].page); |
| if (!pdev->dma_mask || addr + PAGE_SIZE - 1 > *pdev->dma_mask) |
| return 1; |
| } |
| } |
| #endif |
| return 0; |
| } |
| |
| struct dev_gso_cb { |
| void (*destructor)(struct sk_buff *skb); |
| }; |
| |
| #define DEV_GSO_CB(skb) ((struct dev_gso_cb *)(skb)->cb) |
| |
| static void dev_gso_skb_destructor(struct sk_buff *skb) |
| { |
| struct dev_gso_cb *cb; |
| |
| do { |
| struct sk_buff *nskb = skb->next; |
| |
| skb->next = nskb->next; |
| nskb->next = NULL; |
| kfree_skb(nskb); |
| } while (skb->next); |
| |
| cb = DEV_GSO_CB(skb); |
| if (cb->destructor) |
| cb->destructor(skb); |
| } |
| |
| /** |
| * dev_gso_segment - Perform emulated hardware segmentation on skb. |
| * @skb: buffer to segment |
| * |
| * This function segments the given skb and stores the list of segments |
| * in skb->next. |
| */ |
| static int dev_gso_segment(struct sk_buff *skb) |
| { |
| struct net_device *dev = skb->dev; |
| struct sk_buff *segs; |
| int features = dev->features & ~(illegal_highdma(dev, skb) ? |
| NETIF_F_SG : 0); |
| |
| segs = skb_gso_segment(skb, features); |
| |
| /* Verifying header integrity only. */ |
| if (!segs) |
| return 0; |
| |
| if (IS_ERR(segs)) |
| return PTR_ERR(segs); |
| |
| skb->next = segs; |
| DEV_GSO_CB(skb)->destructor = skb->destructor; |
| skb->destructor = dev_gso_skb_destructor; |
| |
| return 0; |
| } |
| |
| int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev, |
| struct netdev_queue *txq) |
| { |
| const struct net_device_ops *ops = dev->netdev_ops; |
| int rc = NETDEV_TX_OK; |
| |
| if (likely(!skb->next)) { |
| if (!list_empty(&ptype_all)) |
| dev_queue_xmit_nit(skb, dev); |
| |
| if (netif_needs_gso(dev, skb)) { |
| if (unlikely(dev_gso_segment(skb))) |
| goto out_kfree_skb; |
| if (skb->next) |
| goto gso; |
| } |
| |
| /* |
| * If device doesnt need skb->dst, release it right now while |
| * its hot in this cpu cache |
| */ |
| if (dev->priv_flags & IFF_XMIT_DST_RELEASE) |
| skb_dst_drop(skb); |
| |
| rc = ops->ndo_start_xmit(skb, dev); |
| if (rc == NETDEV_TX_OK) |
| txq_trans_update(txq); |
| /* |
| * TODO: if skb_orphan() was called by |
| * dev->hard_start_xmit() (for example, the unmodified |
| * igb driver does that; bnx2 doesn't), then |
| * skb_tx_software_timestamp() will be unable to send |
| * back the time stamp. |
| * |
| * How can this be prevented? Always create another |
| * reference to the socket before calling |
| * dev->hard_start_xmit()? Prevent that skb_orphan() |
| * does anything in dev->hard_start_xmit() by clearing |
| * the skb destructor before the call and restoring it |
| * afterwards, then doing the skb_orphan() ourselves? |
| */ |
| return rc; |
| } |
| |
| gso: |
| do { |
| struct sk_buff *nskb = skb->next; |
| |
| skb->next = nskb->next; |
| nskb->next = NULL; |
| |
| /* |
| * If device doesnt need nskb->dst, release it right now while |
| * its hot in this cpu cache |
| */ |
| if (dev->priv_flags & IFF_XMIT_DST_RELEASE) |
| skb_dst_drop(nskb); |
| |
| rc = ops->ndo_start_xmit(nskb, dev); |
| if (unlikely(rc != NETDEV_TX_OK)) { |
| if (rc & ~NETDEV_TX_MASK) |
| goto out_kfree_gso_skb; |
| nskb->next = skb->next; |
| skb->next = nskb; |
| return rc; |
| } |
| txq_trans_update(txq); |
| if (unlikely(netif_tx_queue_stopped(txq) && skb->next)) |
| return NETDEV_TX_BUSY; |
| } while (skb->next); |
| |
| out_kfree_gso_skb: |
| if (likely(skb->next == NULL)) |
| skb->destructor = DEV_GSO_CB(skb)->destructor; |
| out_kfree_skb: |
| kfree_skb(skb); |
| return rc; |
| } |
| |
| static u32 hashrnd __read_mostly; |
| |
| u16 skb_tx_hash(const struct net_device *dev, const struct sk_buff *skb) |
| { |
| u32 hash; |
| |
| if (skb_rx_queue_recorded(skb)) { |
| hash = skb_get_rx_queue(skb); |
| while (unlikely(hash >= dev->real_num_tx_queues)) |
| hash -= dev->real_num_tx_queues; |
| return hash; |
| } |
| |
| if (skb->sk && skb->sk->sk_hash) |
| hash = skb->sk->sk_hash; |
| else |
| hash = skb->protocol; |
| |
| hash = jhash_1word(hash, hashrnd); |
| |
| return (u16) (((u64) hash * dev->real_num_tx_queues) >> 32); |
| } |
| EXPORT_SYMBOL(skb_tx_hash); |
| |
| static inline u16 dev_cap_txqueue(struct net_device *dev, u16 queue_index) |
| { |
| if (unlikely(queue_index >= dev->real_num_tx_queues)) { |
| if (net_ratelimit()) { |
| pr_warning("%s selects TX queue %d, but " |
| "real number of TX queues is %d\n", |
| dev->name, queue_index, dev->real_num_tx_queues); |
| } |
| return 0; |
| } |
| return queue_index; |
| } |
| |
| static struct netdev_queue *dev_pick_tx(struct net_device *dev, |
| struct sk_buff *skb) |
| { |
| u16 queue_index; |
| struct sock *sk = skb->sk; |
| |
| if (sk_tx_queue_recorded(sk)) { |
| queue_index = sk_tx_queue_get(sk); |
| } else { |
| const struct net_device_ops *ops = dev->netdev_ops; |
| |
| if (ops->ndo_select_queue) { |
| queue_index = ops->ndo_select_queue(dev, skb); |
| queue_index = dev_cap_txqueue(dev, queue_index); |
| } else { |
| queue_index = 0; |
| if (dev->real_num_tx_queues > 1) |
| queue_index = skb_tx_hash(dev, skb); |
| |
| if (sk && rcu_dereference_check(sk->sk_dst_cache, 1)) |
| sk_tx_queue_set(sk, queue_index); |
| } |
| } |
| |
| skb_set_queue_mapping(skb, queue_index); |
| return netdev_get_tx_queue(dev, queue_index); |
| } |
| |
| static inline int __dev_xmit_skb(struct sk_buff *skb, struct Qdisc *q, |
| struct net_device *dev, |
| struct netdev_queue *txq) |
| { |
| spinlock_t *root_lock = qdisc_lock(q); |
| int rc; |
| |
| spin_lock(root_lock); |
| if (unlikely(test_bit(__QDISC_STATE_DEACTIVATED, &q->state))) { |
| kfree_skb(skb); |
| rc = NET_XMIT_DROP; |
| } else if ((q->flags & TCQ_F_CAN_BYPASS) && !qdisc_qlen(q) && |
| !test_and_set_bit(__QDISC_STATE_RUNNING, &q->state)) { |
| /* |
| * This is a work-conserving queue; there are no old skbs |
| * waiting to be sent out; and the qdisc is not running - |
| * xmit the skb directly. |
| */ |
| __qdisc_update_bstats(q, skb->len); |
| if (sch_direct_xmit(skb, q, dev, txq, root_lock)) |
| __qdisc_run(q); |
| else |
| clear_bit(__QDISC_STATE_RUNNING, &q->state); |
| |
| rc = NET_XMIT_SUCCESS; |
| } else { |
| rc = qdisc_enqueue_root(skb, q); |
| qdisc_run(q); |
| } |
| spin_unlock(root_lock); |
| |
| return rc; |
| } |
| |
| /* |
| * Returns true if either: |
| * 1. skb has frag_list and the device doesn't support FRAGLIST, or |
| * 2. skb is fragmented and the device does not support SG, or if |
| * at least one of fragments is in highmem and device does not |
| * support DMA from it. |
| */ |
| static inline int skb_needs_linearize(struct sk_buff *skb, |
| struct net_device *dev) |
| { |
| return (skb_has_frags(skb) && !(dev->features & NETIF_F_FRAGLIST)) || |
| (skb_shinfo(skb)->nr_frags && (!(dev->features & NETIF_F_SG) || |
| illegal_highdma(dev, skb))); |
| } |
| |
| /** |
| * dev_queue_xmit - transmit a buffer |
| * @skb: buffer to transmit |
| * |
| * Queue a buffer for transmission to a network device. The caller must |
| * have set the device and priority and built the buffer before calling |
| * this function. The function can be called from an interrupt. |
| * |
| * A negative errno code is returned on a failure. A success does not |
| * guarantee the frame will be transmitted as it may be dropped due |
| * to congestion or traffic shaping. |
| * |
| * ----------------------------------------------------------------------------------- |
| * I notice this method can also return errors from the queue disciplines, |
| * including NET_XMIT_DROP, which is a positive value. So, errors can also |
| * be positive. |
| * |
| * Regardless of the return value, the skb is consumed, so it is currently |
| * difficult to retry a send to this method. (You can bump the ref count |
| * before sending to hold a reference for retry if you are careful.) |
| * |
| * When calling this method, interrupts MUST be enabled. This is because |
| * the BH enable code must have IRQs enabled so that it will not deadlock. |
| * --BLG |
| */ |
| int dev_queue_xmit(struct sk_buff *skb) |
| { |
| struct net_device *dev = skb->dev; |
| struct netdev_queue *txq; |
| struct Qdisc *q; |
| int rc = -ENOMEM; |
| |
| /* GSO will handle the following emulations directly. */ |
| if (netif_needs_gso(dev, skb)) |
| goto gso; |
| |
| /* Convert a paged skb to linear, if required */ |
| if (skb_needs_linearize(skb, dev) && __skb_linearize(skb)) |
| goto out_kfree_skb; |
| |
| /* If packet is not checksummed and device does not support |
| * checksumming for this protocol, complete checksumming here. |
| */ |
| if (skb->ip_summed == CHECKSUM_PARTIAL) { |
| skb_set_transport_header(skb, skb->csum_start - |
| skb_headroom(skb)); |
| if (!dev_can_checksum(dev, skb) && skb_checksum_help(skb)) |
| goto out_kfree_skb; |
| } |
| |
| gso: |
| /* Disable soft irqs for various locks below. Also |
| * stops preemption for RCU. |
| */ |
| rcu_read_lock_bh(); |
| |
| txq = dev_pick_tx(dev, skb); |
| q = rcu_dereference_bh(txq->qdisc); |
| |
| #ifdef CONFIG_NET_CLS_ACT |
| skb->tc_verd = SET_TC_AT(skb->tc_verd, AT_EGRESS); |
| #endif |
| if (q->enqueue) { |
| rc = __dev_xmit_skb(skb, q, dev, txq); |
| goto out; |
| } |
| |
| /* The device has no queue. Common case for software devices: |
| loopback, all the sorts of tunnels... |
| |
| Really, it is unlikely that netif_tx_lock protection is necessary |
| here. (f.e. loopback and IP tunnels are clean ignoring statistics |
| counters.) |
| However, it is possible, that they rely on protection |
| made by us here. |
| |
| Check this and shot the lock. It is not prone from deadlocks. |
| Either shot noqueue qdisc, it is even simpler 8) |
| */ |
| if (dev->flags & IFF_UP) { |
| int cpu = smp_processor_id(); /* ok because BHs are off */ |
| |
| if (txq->xmit_lock_owner != cpu) { |
| |
| HARD_TX_LOCK(dev, txq, cpu); |
| |
| if (!netif_tx_queue_stopped(txq)) { |
| rc = dev_hard_start_xmit(skb, dev, txq); |
| if (dev_xmit_complete(rc)) { |
| HARD_TX_UNLOCK(dev, txq); |
| goto out; |
| } |
| } |
| HARD_TX_UNLOCK(dev, txq); |
| if (net_ratelimit()) |
| printk(KERN_CRIT "Virtual device %s asks to " |
| "queue packet!\n", dev->name); |
| } else { |
| /* Recursion is detected! It is possible, |
| * unfortunately */ |
| if (net_ratelimit()) |
| printk(KERN_CRIT "Dead loop on virtual device " |
| "%s, fix it urgently!\n", dev->name); |
| } |
| } |
| |
| rc = -ENETDOWN; |
| rcu_read_unlock_bh(); |
| |
| out_kfree_skb: |
| kfree_skb(skb); |
| return rc; |
| out: |
| rcu_read_unlock_bh(); |
| return rc; |
| } |
| EXPORT_SYMBOL(dev_queue_xmit); |
| |
| |
| /*======================================================================= |
| Receiver routines |
| =======================================================================*/ |
| |
| int netdev_max_backlog __read_mostly = 1000; |
| int netdev_budget __read_mostly = 300; |
| int weight_p __read_mostly = 64; /* old backlog weight */ |
| |
| DEFINE_PER_CPU(struct netif_rx_stats, netdev_rx_stat) = { 0, }; |
| |
| #ifdef CONFIG_RPS |
| |
| /* One global table that all flow-based protocols share. */ |
| struct rps_sock_flow_table *rps_sock_flow_table __read_mostly; |
| EXPORT_SYMBOL(rps_sock_flow_table); |
| |
| /* |
| * get_rps_cpu is called from netif_receive_skb and returns the target |
| * CPU from the RPS map of the receiving queue for a given skb. |
| * rcu_read_lock must be held on entry. |
| */ |
| static int get_rps_cpu(struct net_device *dev, struct sk_buff *skb, |
| struct rps_dev_flow **rflowp) |
| { |
| struct ipv6hdr *ip6; |
| struct iphdr *ip; |
| struct netdev_rx_queue *rxqueue; |
| struct rps_map *map; |
| struct rps_dev_flow_table *flow_table; |
| struct rps_sock_flow_table *sock_flow_table; |
| int cpu = -1; |
| u8 ip_proto; |
| u16 tcpu; |
| u32 addr1, addr2, ports, ihl; |
| |
| if (skb_rx_queue_recorded(skb)) { |
| u16 index = skb_get_rx_queue(skb); |
| if (unlikely(index >= dev->num_rx_queues)) { |
| if (net_ratelimit()) { |
| pr_warning("%s received packet on queue " |
| "%u, but number of RX queues is %u\n", |
| dev->name, index, dev->num_rx_queues); |
| } |
| goto done; |
| } |
| rxqueue = dev->_rx + index; |
| } else |
| rxqueue = dev->_rx; |
| |
| if (!rxqueue->rps_map && !rxqueue->rps_flow_table) |
| goto done; |
| |
| if (skb->rxhash) |
| goto got_hash; /* Skip hash computation on packet header */ |
| |
| switch (skb->protocol) { |
| case __constant_htons(ETH_P_IP): |
| if (!pskb_may_pull(skb, sizeof(*ip))) |
| goto done; |
| |
| ip = (struct iphdr *) skb->data; |
| ip_proto = ip->protocol; |
| addr1 = ip->saddr; |
| addr2 = ip->daddr; |
| ihl = ip->ihl; |
| break; |
| case __constant_htons(ETH_P_IPV6): |
| if (!pskb_may_pull(skb, sizeof(*ip6))) |
| goto done; |
| |
| ip6 = (struct ipv6hdr *) skb->data; |
| ip_proto = ip6->nexthdr; |
| addr1 = ip6->saddr.s6_addr32[3]; |
| addr2 = ip6->daddr.s6_addr32[3]; |
| ihl = (40 >> 2); |
| break; |
| default: |
| goto done; |
| } |
| ports = 0; |
| switch (ip_proto) { |
| case IPPROTO_TCP: |
| case IPPROTO_UDP: |
| case IPPROTO_DCCP: |
| case IPPROTO_ESP: |
| case IPPROTO_AH: |
| case IPPROTO_SCTP: |
| case IPPROTO_UDPLITE: |
| if (pskb_may_pull(skb, (ihl * 4) + 4)) |
| ports = *((u32 *) (skb->data + (ihl * 4))); |
| break; |
| |
| default: |
| break; |
| } |
| |
| skb->rxhash = jhash_3words(addr1, addr2, ports, hashrnd); |
| if (!skb->rxhash) |
| skb->rxhash = 1; |
| |
| got_hash: |
| flow_table = rcu_dereference(rxqueue->rps_flow_table); |
| sock_flow_table = rcu_dereference(rps_sock_flow_table); |
| if (flow_table && sock_flow_table) { |
| u16 next_cpu; |
| struct rps_dev_flow *rflow; |
| |
| rflow = &flow_table->flows[skb->rxhash & flow_table->mask]; |
| tcpu = rflow->cpu; |
| |
| next_cpu = sock_flow_table->ents[skb->rxhash & |
| sock_flow_table->mask]; |
| |
| /* |
| * If the desired CPU (where last recvmsg was done) is |
| * different from current CPU (one in the rx-queue flow |
| * table entry), switch if one of the following holds: |
| * - Current CPU is unset (equal to RPS_NO_CPU). |
| * - Current CPU is offline. |
| * - The current CPU's queue tail has advanced beyond the |
| * last packet that was enqueued using this table entry. |
| * This guarantees that all previous packets for the flow |
| * have been dequeued, thus preserving in order delivery. |
| */ |
| if (unlikely(tcpu != next_cpu) && |
| (tcpu == RPS_NO_CPU || !cpu_online(tcpu) || |
| ((int)(per_cpu(softnet_data, tcpu).input_queue_head - |
| rflow->last_qtail)) >= 0)) { |
| tcpu = rflow->cpu = next_cpu; |
| if (tcpu != RPS_NO_CPU) |
| rflow->last_qtail = per_cpu(softnet_data, |
| tcpu).input_queue_head; |
| } |
| if (tcpu != RPS_NO_CPU && cpu_online(tcpu)) { |
| *rflowp = rflow; |
| cpu = tcpu; |
| goto done; |
| } |
| } |
| |
| map = rcu_dereference(rxqueue->rps_map); |
| if (map) { |
| tcpu = map->cpus[((u64) skb->rxhash * map->len) >> 32]; |
| |
| if (cpu_online(tcpu)) { |
| cpu = tcpu; |
| goto done; |
| } |
| } |
| |
| done: |
| return cpu; |
| } |
| |
| /* |
| * This structure holds the per-CPU mask of CPUs for which IPIs are scheduled |
| * to be sent to kick remote softirq processing. There are two masks since |
| * the sending of IPIs must be done with interrupts enabled. The select field |
| * indicates the current mask that enqueue_backlog uses to schedule IPIs. |
| * select is flipped before net_rps_action is called while still under lock, |
| * net_rps_action then uses the non-selected mask to send the IPIs and clears |
| * it without conflicting with enqueue_backlog operation. |
| */ |
| struct rps_remote_softirq_cpus { |
| cpumask_t mask[2]; |
| int select; |
| }; |
| static DEFINE_PER_CPU(struct rps_remote_softirq_cpus, rps_remote_softirq_cpus); |
| |
| /* Called from hardirq (IPI) context */ |
| static void trigger_softirq(void *data) |
| { |
| struct softnet_data *queue = data; |
| __napi_schedule(&queue->backlog); |
| __get_cpu_var(netdev_rx_stat).received_rps++; |
| } |
| #endif /* CONFIG_RPS */ |
| |
| /* |
| * enqueue_to_backlog is called to queue an skb to a per CPU backlog |
| * queue (may be a remote CPU queue). |
| */ |
| static int enqueue_to_backlog(struct sk_buff *skb, int cpu, |
| unsigned int *qtail) |
| { |
| struct softnet_data *queue; |
| unsigned long flags; |
| |
| queue = &per_cpu(softnet_data, cpu); |
| |
| local_irq_save(flags); |
| __get_cpu_var(netdev_rx_stat).total++; |
| |
| rps_lock(queue); |
| if (queue->input_pkt_queue.qlen <= netdev_max_backlog) { |
| if (queue->input_pkt_queue.qlen) { |
| enqueue: |
| __skb_queue_tail(&queue->input_pkt_queue, skb); |
| #ifdef CONFIG_RPS |
| *qtail = queue->input_queue_head + |
| queue->input_pkt_queue.qlen; |
| #endif |
| rps_unlock(queue); |
| local_irq_restore(flags); |
| return NET_RX_SUCCESS; |
| } |
| |
| /* Schedule NAPI for backlog device */ |
| if (napi_schedule_prep(&queue->backlog)) { |
| #ifdef CONFIG_RPS |
| if (cpu != smp_processor_id()) { |
| struct rps_remote_softirq_cpus *rcpus = |
| &__get_cpu_var(rps_remote_softirq_cpus); |
| |
| cpu_set(cpu, rcpus->mask[rcpus->select]); |
| __raise_softirq_irqoff(NET_RX_SOFTIRQ); |
| goto enqueue; |
| } |
| #endif |
| __napi_schedule(&queue->backlog); |
| } |
| goto enqueue; |
| } |
| |
| rps_unlock(queue); |
| |
| __get_cpu_var(netdev_rx_stat).dropped++; |
| local_irq_restore(flags); |
| |
| kfree_skb(skb); |
| return NET_RX_DROP; |
| } |
| |
| /** |
| * netif_rx - post buffer to the network code |
| * @skb: buffer to post |
| * |
| * This function receives a packet from a device driver and queues it for |
| * the upper (protocol) levels to process. It always succeeds. The buffer |
| * may be dropped during processing for congestion control or by the |
| * protocol layers. |
| * |
| * return values: |
| * NET_RX_SUCCESS (no congestion) |
| * NET_RX_DROP (packet was dropped) |
| * |
| */ |
| |
| int netif_rx(struct sk_buff *skb) |
| { |
| int ret; |
| |
| /* if netpoll wants it, pretend we never saw it */ |
| if (netpoll_rx(skb)) |
| return NET_RX_DROP; |
| |
| if (!skb->tstamp.tv64) |
| net_timestamp(skb); |
| |
| #ifdef CONFIG_RPS |
| { |
| struct rps_dev_flow voidflow, *rflow = &voidflow; |
| int cpu; |
| |
| rcu_read_lock(); |
| |
| cpu = get_rps_cpu(skb->dev, skb, &rflow); |
| if (cpu < 0) |
| cpu = smp_processor_id(); |
| |
| ret = enqueue_to_backlog(skb, cpu, &rflow->last_qtail); |
| |
| rcu_read_unlock(); |
| } |
| #else |
| { |
| unsigned int qtail; |
| ret = enqueue_to_backlog(skb, get_cpu(), &qtail); |
| put_cpu(); |
| } |
| #endif |
| return ret; |
| } |
| EXPORT_SYMBOL(netif_rx); |
| |
| int netif_rx_ni(struct sk_buff *skb) |
| { |
| int err; |
| |
| preempt_disable(); |
| err = netif_rx(skb); |
| if (local_softirq_pending()) |
| do_softirq(); |
| preempt_enable(); |
| |
| return err; |
| } |
| EXPORT_SYMBOL(netif_rx_ni); |
| |
| static void net_tx_action(struct softirq_action *h) |
| { |
| struct softnet_data *sd = &__get_cpu_var(softnet_data); |
| |
| if (sd->completion_queue) { |
| struct sk_buff *clist; |
| |
| local_irq_disable(); |
| clist = sd->completion_queue; |
| sd->completion_queue = NULL; |
| local_irq_enable(); |
| |
| while (clist) { |
| struct sk_buff *skb = clist; |
| clist = clist->next; |
| |
| WARN_ON(atomic_read(&skb->users)); |
| __kfree_skb(skb); |
| } |
| } |
| |
| if (sd->output_queue) { |
| struct Qdisc *head; |
| |
| local_irq_disable(); |
| head = sd->output_queue; |
| sd->output_queue = NULL; |
| local_irq_enable(); |
| |
| while (head) { |
| struct Qdisc *q = head; |
| spinlock_t *root_lock; |
| |
| head = head->next_sched; |
| |
| root_lock = qdisc_lock(q); |
| if (spin_trylock(root_lock)) { |
| smp_mb__before_clear_bit(); |
| clear_bit(__QDISC_STATE_SCHED, |
| &q->state); |
| qdisc_run(q); |
| spin_unlock(root_lock); |
| } else { |
| if (!test_bit(__QDISC_STATE_DEACTIVATED, |
| &q->state)) { |
| __netif_reschedule(q); |
| } else { |
| smp_mb__before_clear_bit(); |
| clear_bit(__QDISC_STATE_SCHED, |
| &q->state); |
| } |
| } |
| } |
| } |
| } |
| |
| static inline int deliver_skb(struct sk_buff *skb, |
| struct packet_type *pt_prev, |
| struct net_device *orig_dev) |
| { |
| atomic_inc(&skb->users); |
| return pt_prev->func(skb, skb->dev, pt_prev, orig_dev); |
| } |
| |
| #if defined(CONFIG_BRIDGE) || defined (CONFIG_BRIDGE_MODULE) |
| |
| #if defined(CONFIG_ATM_LANE) || defined(CONFIG_ATM_LANE_MODULE) |
| /* This hook is defined here for ATM LANE */ |
| int (*br_fdb_test_addr_hook)(struct net_device *dev, |
| unsigned char *addr) __read_mostly; |
| EXPORT_SYMBOL_GPL(br_fdb_test_addr_hook); |
| #endif |
| |
| /* |
| * If bridge module is loaded call bridging hook. |
| * returns NULL if packet was consumed. |
| */ |
| struct sk_buff *(*br_handle_frame_hook)(struct net_bridge_port *p, |
| struct sk_buff *skb) __read_mostly; |
| EXPORT_SYMBOL_GPL(br_handle_frame_hook); |
| |
| static inline struct sk_buff *handle_bridge(struct sk_buff *skb, |
| struct packet_type **pt_prev, int *ret, |
| struct net_device *orig_dev) |
| { |
| struct net_bridge_port *port; |
| |
| if (skb->pkt_type == PACKET_LOOPBACK || |
| (port = rcu_dereference(skb->dev->br_port)) == NULL) |
| return skb; |
| |
| if (*pt_prev) { |
| *ret = deliver_skb(skb, *pt_prev, orig_dev); |
| *pt_prev = NULL; |
| } |
| |
| return br_handle_frame_hook(port, skb); |
| } |
| #else |
| #define handle_bridge(skb, pt_prev, ret, orig_dev) (skb) |
| #endif |
| |
| #if defined(CONFIG_MACVLAN) || defined(CONFIG_MACVLAN_MODULE) |
| struct sk_buff *(*macvlan_handle_frame_hook)(struct sk_buff *skb) __read_mostly; |
| EXPORT_SYMBOL_GPL(macvlan_handle_frame_hook); |
| |
| static inline struct sk_buff *handle_macvlan(struct sk_buff *skb, |
| struct packet_type **pt_prev, |
| int *ret, |
| struct net_device *orig_dev) |
| { |
| if (skb->dev->macvlan_port == NULL) |
| return skb; |
| |
| if (*pt_prev) { |
| *ret = deliver_skb(skb, *pt_prev, orig_dev); |
| *pt_prev = NULL; |
| } |
| return macvlan_handle_frame_hook(skb); |
| } |
| #else |
| #define handle_macvlan(skb, pt_prev, ret, orig_dev) (skb) |
| #endif |
| |
| #ifdef CONFIG_NET_CLS_ACT |
| /* TODO: Maybe we should just force sch_ingress to be compiled in |
| * when CONFIG_NET_CLS_ACT is? otherwise some useless instructions |
| * a compare and 2 stores extra right now if we dont have it on |
| * but have CONFIG_NET_CLS_ACT |
| * NOTE: This doesnt stop any functionality; if you dont have |
| * the ingress scheduler, you just cant add policies on ingress. |
| * |
| */ |
| static int ing_filter(struct sk_buff *skb) |
| { |
| struct net_device *dev = skb->dev; |
| u32 ttl = G_TC_RTTL(skb->tc_verd); |
| struct netdev_queue *rxq; |
| int result = TC_ACT_OK; |
| struct Qdisc *q; |
| |
| if (MAX_RED_LOOP < ttl++) { |
| printk(KERN_WARNING |
| "Redir loop detected Dropping packet (%d->%d)\n", |
| skb->skb_iif, dev->ifindex); |
| return TC_ACT_SHOT; |
| } |
| |
| skb->tc_verd = SET_TC_RTTL(skb->tc_verd, ttl); |
| skb->tc_verd = SET_TC_AT(skb->tc_verd, AT_INGRESS); |
| |
| rxq = &dev->rx_queue; |
| |
| q = rxq->qdisc; |
| if (q != &noop_qdisc) { |
| spin_lock(qdisc_lock(q)); |
| if (likely(!test_bit(__QDISC_STATE_DEACTIVATED, &q->state))) |
| result = qdisc_enqueue_root(skb, q); |
| spin_unlock(qdisc_lock(q)); |
| } |
| |
| return result; |
| } |
| |
| static inline struct sk_buff *handle_ing(struct sk_buff *skb, |
| struct packet_type **pt_prev, |
| int *ret, struct net_device *orig_dev) |
| { |
| if (skb->dev->rx_queue.qdisc == &noop_qdisc) |
| goto out; |
| |
| if (*pt_prev) { |
| *ret = deliver_skb(skb, *pt_prev, orig_dev); |
| *pt_prev = NULL; |
| } else { |
| /* Huh? Why does turning on AF_PACKET affect this? */ |
| skb->tc_verd = SET_TC_OK2MUNGE(skb->tc_verd); |
| } |
| |
| switch (ing_filter(skb)) { |
| case TC_ACT_SHOT: |
| case TC_ACT_STOLEN: |
| kfree_skb(skb); |
| return NULL; |
| } |
| |
| out: |
| skb->tc_verd = 0; |
| return skb; |
| } |
| #endif |
| |
| /* |
| * netif_nit_deliver - deliver received packets to network taps |
| * @skb: buffer |
| * |
| * This function is used to deliver incoming packets to network |
| * taps. It should be used when the normal netif_receive_skb path |
| * is bypassed, for example because of VLAN acceleration. |
| */ |
| void netif_nit_deliver(struct sk_buff *skb) |
| { |
| struct packet_type *ptype; |
| |
| if (list_empty(&ptype_all)) |
| return; |
| |
| skb_reset_network_header(skb); |
| skb_reset_transport_header(skb); |
| skb->mac_len = skb->network_header - skb->mac_header; |
| |
| rcu_read_lock(); |
| list_for_each_entry_rcu(ptype, &ptype_all, list) { |
| if (!ptype->dev || ptype->dev == skb->dev) |
| deliver_skb(skb, ptype, skb->dev); |
| } |
| rcu_read_unlock(); |
| } |
| |
| static inline void skb_bond_set_mac_by_master(struct sk_buff *skb, |
| struct net_device *master) |
| { |
| if (skb->pkt_type == PACKET_HOST) { |
| u16 *dest = (u16 *) eth_hdr(skb)->h_dest; |
| |
| memcpy(dest, master->dev_addr, ETH_ALEN); |
| } |
| } |
| |
| /* On bonding slaves other than the currently active slave, suppress |
| * duplicates except for 802.3ad ETH_P_SLOW, alb non-mcast/bcast, and |
| * ARP on active-backup slaves with arp_validate enabled. |
| */ |
| int __skb_bond_should_drop(struct sk_buff *skb, struct net_device *master) |
| { |
| struct net_device *dev = skb->dev; |
| |
| if (master->priv_flags & IFF_MASTER_ARPMON) |
| dev->last_rx = jiffies; |
| |
| if ((master->priv_flags & IFF_MASTER_ALB) && master->br_port) { |
| /* Do address unmangle. The local destination address |
| * will be always the one master has. Provides the right |
| * functionality in a bridge. |
| */ |
| skb_bond_set_mac_by_master(skb, master); |
| } |
| |
| if (dev->priv_flags & IFF_SLAVE_INACTIVE) { |
| if ((dev->priv_flags & IFF_SLAVE_NEEDARP) && |
| skb->protocol == __cpu_to_be16(ETH_P_ARP)) |
| return 0; |
| |
| if (master->priv_flags & IFF_MASTER_ALB) { |
| if (skb->pkt_type != PACKET_BROADCAST && |
| skb->pkt_type != PACKET_MULTICAST) |
| return 0; |
| } |
| if (master->priv_flags & IFF_MASTER_8023AD && |
| skb->protocol == __cpu_to_be16(ETH_P_SLOW)) |
| return 0; |
| |
| return 1; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(__skb_bond_should_drop); |
| |
| static int __netif_receive_skb(struct sk_buff *skb) |
| { |
| struct packet_type *ptype, *pt_prev; |
| struct net_device *orig_dev; |
| struct net_device *master; |
| struct net_device *null_or_orig; |
| struct net_device *null_or_bond; |
| int ret = NET_RX_DROP; |
| __be16 type; |
| |
| if (!skb->tstamp.tv64) |
| net_timestamp(skb); |
| |
| if (vlan_tx_tag_present(skb) && vlan_hwaccel_do_receive(skb)) |
| return NET_RX_SUCCESS; |
| |
| /* if we've gotten here through NAPI, check netpoll */ |
| if (netpoll_receive_skb(skb)) |
| return NET_RX_DROP; |
| |
| if (!skb->skb_iif) |
| skb->skb_iif = skb->dev->ifindex; |
| |
| null_or_orig = NULL; |
| orig_dev = skb->dev; |
| master = ACCESS_ONCE(orig_dev->master); |
| if (master) { |
| if (skb_bond_should_drop(skb, master)) |
| null_or_orig = orig_dev; /* deliver only exact match */ |
| else |
| skb->dev = master; |
| } |
| |
| __get_cpu_var(netdev_rx_stat).total++; |
| |
| skb_reset_network_header(skb); |
| skb_reset_transport_header(skb); |
| skb->mac_len = skb->network_header - skb->mac_header; |
| |
| pt_prev = NULL; |
| |
| rcu_read_lock(); |
| |
| #ifdef CONFIG_NET_CLS_ACT |
| if (skb->tc_verd & TC_NCLS) { |
| skb->tc_verd = CLR_TC_NCLS(skb->tc_verd); |
| goto ncls; |
| } |
| #endif |
| |
| list_for_each_entry_rcu(ptype, &ptype_all, list) { |
| if (ptype->dev == null_or_orig || ptype->dev == skb->dev || |
| ptype->dev == orig_dev) { |
| if (pt_prev) |
| ret = deliver_skb(skb, pt_prev, orig_dev); |
| pt_prev = ptype; |
| } |
| } |
| |
| #ifdef CONFIG_NET_CLS_ACT |
| skb = handle_ing(skb, &pt_prev, &ret, orig_dev); |
| if (!skb) |
| goto out; |
| ncls: |
| #endif |
| |
| skb = handle_bridge(skb, &pt_prev, &ret, orig_dev); |
| if (!skb) |
| goto out; |
| skb = handle_macvlan(skb, &pt_prev, &ret, orig_dev); |
| if (!skb) |
| goto out; |
| |
| /* |
| * Make sure frames received on VLAN interfaces stacked on |
| * bonding interfaces still make their way to any base bonding |
| * device that may have registered for a specific ptype. The |
| * handler may have to adjust skb->dev and orig_dev. |
| */ |
| null_or_bond = NULL; |
| if ((skb->dev->priv_flags & IFF_802_1Q_VLAN) && |
| (vlan_dev_real_dev(skb->dev)->priv_flags & IFF_BONDING)) { |
| null_or_bond = vlan_dev_real_dev(skb->dev); |
| } |
| |
| type = skb->protocol; |
| list_for_each_entry_rcu(ptype, |
| &ptype_base[ntohs(type) & PTYPE_HASH_MASK], list) { |
| if (ptype->type == type && (ptype->dev == null_or_orig || |
| ptype->dev == skb->dev || ptype->dev == orig_dev || |
| ptype->dev == null_or_bond)) { |
| if (pt_prev) |
| ret = deliver_skb(skb, pt_prev, orig_dev); |
| pt_prev = ptype; |
| } |
| } |
| |
| if (pt_prev) { |
| ret = pt_prev->func(skb, skb->dev, pt_prev, orig_dev); |
| } else { |
| kfree_skb(skb); |
| /* Jamal, now you will not able to escape explaining |
| * me how you were going to use this. :-) |
| */ |
| ret = NET_RX_DROP; |
| } |
| |
| out: |
| rcu_read_unlock(); |
| return ret; |
| } |
| |
| /** |
| * netif_receive_skb - process receive buffer from network |
| * @skb: buffer to process |
| * |
| * netif_receive_skb() is the main receive data processing function. |
| * It always succeeds. The buffer may be dropped during processing |
| * for congestion control or by the protocol layers. |
| * |
| * This function may only be called from softirq context and interrupts |
| * should be enabled. |
| * |
| * Return values (usually ignored): |
| * NET_RX_SUCCESS: no congestion |
| * NET_RX_DROP: packet was dropped |
| */ |
| int netif_receive_skb(struct sk_buff *skb) |
| { |
| #ifdef CONFIG_RPS |
| struct rps_dev_flow voidflow, *rflow = &voidflow; |
| int cpu, ret; |
| |
| rcu_read_lock(); |
| |
| cpu = get_rps_cpu(skb->dev, skb, &rflow); |
| |
| if (cpu >= 0) { |
| ret = enqueue_to_backlog(skb, cpu, &rflow->last_qtail); |
| rcu_read_unlock(); |
| } else { |
| rcu_read_unlock(); |
| ret = __netif_receive_skb(skb); |
| } |
| |
| return ret; |
| #else |
| return __netif_receive_skb(skb); |
| #endif |
| } |
| EXPORT_SYMBOL(netif_receive_skb); |
| |
| /* Network device is going away, flush any packets still pending */ |
| static void flush_backlog(void *arg) |
| { |
| struct net_device *dev = arg; |
| struct softnet_data *queue = &__get_cpu_var(softnet_data); |
| struct sk_buff *skb, *tmp; |
| |
| rps_lock(queue); |
| skb_queue_walk_safe(&queue->input_pkt_queue, skb, tmp) |
| if (skb->dev == dev) { |
| __skb_unlink(skb, &queue->input_pkt_queue); |
| kfree_skb(skb); |
| incr_input_queue_head(queue); |
| } |
| rps_unlock(queue); |
| } |
| |
| static int napi_gro_complete(struct sk_buff *skb) |
| { |
| struct packet_type *ptype; |
| __be16 type = skb->protocol; |
| struct list_head *head = &ptype_base[ntohs(type) & PTYPE_HASH_MASK]; |
| int err = -ENOENT; |
| |
| if (NAPI_GRO_CB(skb)->count == 1) { |
| skb_shinfo(skb)->gso_size = 0; |
| goto out; |
| } |
| |
| rcu_read_lock(); |
| list_for_each_entry_rcu(ptype, head, list) { |
| if (ptype->type != type || ptype->dev || !ptype->gro_complete) |
| continue; |
| |
| err = ptype->gro_complete(skb); |
| break; |
| } |
| rcu_read_unlock(); |
| |
| if (err) { |
| WARN_ON(&ptype->list == head); |
| kfree_skb(skb); |
| return NET_RX_SUCCESS; |
| } |
| |
| out: |
| return netif_receive_skb(skb); |
| } |
| |
| static void napi_gro_flush(struct napi_struct *napi) |
| { |
| struct sk_buff *skb, *next; |
| |
| for (skb = napi->gro_list; skb; skb = next) { |
| next = skb->next; |
| skb->next = NULL; |
| napi_gro_complete(skb); |
| } |
| |
| napi->gro_count = 0; |
| napi->gro_list = NULL; |
| } |
| |
| enum gro_result dev_gro_receive(struct napi_struct *napi, struct sk_buff *skb) |
| { |
| struct sk_buff **pp = NULL; |
| struct packet_type *ptype; |
| __be16 type = skb->protocol; |
| struct list_head *head = &ptype_base[ntohs(type) & PTYPE_HASH_MASK]; |
| int same_flow; |
| int mac_len; |
| enum gro_result ret; |
| |
| if (!(skb->dev->features & NETIF_F_GRO)) |
| goto normal; |
| |
| if (skb_is_gso(skb) || skb_has_frags(skb)) |
| goto normal; |
| |
| rcu_read_lock(); |
| list_for_each_entry_rcu(ptype, head, list) { |
| if (ptype->type != type || ptype->dev || !ptype->gro_receive) |
| continue; |
| |
| skb_set_network_header(skb, skb_gro_offset(skb)); |
| mac_len = skb->network_header - skb->mac_header; |
| skb->mac_len = mac_len; |
| NAPI_GRO_CB(skb)->same_flow = 0; |
| NAPI_GRO_CB(skb)->flush = 0; |
| NAPI_GRO_CB(skb)->free = 0; |
| |
| pp = ptype->gro_receive(&napi->gro_list, skb); |
| break; |
| } |
| rcu_read_unlock(); |
| |
| if (&ptype->list == head) |
| goto normal; |
| |
| same_flow = NAPI_GRO_CB(skb)->same_flow; |
| ret = NAPI_GRO_CB(skb)->free ? GRO_MERGED_FREE : GRO_MERGED; |
| |
| if (pp) { |
| struct sk_buff *nskb = *pp; |
| |
| *pp = nskb->next; |
| nskb->next = NULL; |
| napi_gro_complete(nskb); |
| napi->gro_count--; |
| } |
| |
| if (same_flow) |
| goto ok; |
| |
| if (NAPI_GRO_CB(skb)->flush || napi->gro_count >= MAX_GRO_SKBS) |
| goto normal; |
| |
| napi->gro_count++; |
| NAPI_GRO_CB(skb)->count = 1; |
| skb_shinfo(skb)->gso_size = skb_gro_len(skb); |
| skb->next = napi->gro_list; |
| napi->gro_list = skb; |
| ret = GRO_HELD; |
| |
| pull: |
| if (skb_headlen(skb) < skb_gro_offset(skb)) { |
| int grow = skb_gro_offset(skb) - skb_headlen(skb); |
| |
| BUG_ON(skb->end - skb->tail < grow); |
| |
| memcpy(skb_tail_pointer(skb), NAPI_GRO_CB(skb)->frag0, grow); |
| |
| skb->tail += grow; |
| skb->data_len -= grow; |
| |
| skb_shinfo(skb)->frags[0].page_offset += grow; |
| skb_shinfo(skb)->frags[0].size -= grow; |
| |
| if (unlikely(!skb_shinfo(skb)->frags[0].size)) { |
| put_page(skb_shinfo(skb)->frags[0].page); |
| memmove(skb_shinfo(skb)->frags, |
| skb_shinfo(skb)->frags + 1, |
| --skb_shinfo(skb)->nr_frags); |
| } |
| } |
| |
| ok: |
| return ret; |
| |
| normal: |
| ret = GRO_NORMAL; |
| goto pull; |
| } |
| EXPORT_SYMBOL(dev_gro_receive); |
| |
| static gro_result_t |
| __napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb) |
| { |
| struct sk_buff *p; |
| |
| if (netpoll_rx_on(skb)) |
| return GRO_NORMAL; |
| |
| for (p = napi->gro_list; p; p = p->next) { |
| NAPI_GRO_CB(p)->same_flow = |
| (p->dev == skb->dev) && |
| !compare_ether_header(skb_mac_header(p), |
| skb_gro_mac_header(skb)); |
| NAPI_GRO_CB(p)->flush = 0; |
| } |
| |
| return dev_gro_receive(napi, skb); |
| } |
| |
| gro_result_t napi_skb_finish(gro_result_t ret, struct sk_buff *skb) |
| { |
| switch (ret) { |
| case GRO_NORMAL: |
| if (netif_receive_skb(skb)) |
| ret = GRO_DROP; |
| break; |
| |
| case GRO_DROP: |
| case GRO_MERGED_FREE: |
| kfree_skb(skb); |
| break; |
| |
| case GRO_HELD: |
| case GRO_MERGED: |
| break; |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(napi_skb_finish); |
| |
| void skb_gro_reset_offset(struct sk_buff *skb) |
| { |
| NAPI_GRO_CB(skb)->data_offset = 0; |
| NAPI_GRO_CB(skb)->frag0 = NULL; |
| NAPI_GRO_CB(skb)->frag0_len = 0; |
| |
| if (skb->mac_header == skb->tail && |
| !PageHighMem(skb_shinfo(skb)->frags[0].page)) { |
| NAPI_GRO_CB(skb)->frag0 = |
| page_address(skb_shinfo(skb)->frags[0].page) + |
| skb_shinfo(skb)->frags[0].page_offset; |
| NAPI_GRO_CB(skb)->frag0_len = skb_shinfo(skb)->frags[0].size; |
| } |
| } |
| EXPORT_SYMBOL(skb_gro_reset_offset); |
| |
| gro_result_t napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb) |
| { |
| skb_gro_reset_offset(skb); |
| |
| return napi_skb_finish(__napi_gro_receive(napi, skb), skb); |
| } |
| EXPORT_SYMBOL(napi_gro_receive); |
| |
| void napi_reuse_skb(struct napi_struct *napi, struct sk_buff *skb) |
| { |
| __skb_pull(skb, skb_headlen(skb)); |
| skb_reserve(skb, NET_IP_ALIGN - skb_headroom(skb)); |
| |
| napi->skb = skb; |
| } |
| EXPORT_SYMBOL(napi_reuse_skb); |
| |
| struct sk_buff *napi_get_frags(struct napi_struct *napi) |
| { |
| struct sk_buff *skb = napi->skb; |
| |
| if (!skb) { |
| skb = netdev_alloc_skb_ip_align(napi->dev, GRO_MAX_HEAD); |
| if (skb) |
| napi->skb = skb; |
| } |
| return skb; |
| } |
| EXPORT_SYMBOL(napi_get_frags); |
| |
| gro_result_t napi_frags_finish(struct napi_struct *napi, struct sk_buff *skb, |
| gro_result_t ret) |
| { |
| switch (ret) { |
| case GRO_NORMAL: |
| case GRO_HELD: |
| skb->protocol = eth_type_trans(skb, skb->dev); |
| |
| if (ret == GRO_HELD) |
| skb_gro_pull(skb, -ETH_HLEN); |
| else if (netif_receive_skb(skb)) |
| ret = GRO_DROP; |
| break; |
| |
| case GRO_DROP: |
| case GRO_MERGED_FREE: |
| napi_reuse_skb(napi, skb); |
| break; |
| |
| case GRO_MERGED: |
| break; |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(napi_frags_finish); |
| |
| struct sk_buff *napi_frags_skb(struct napi_struct *napi) |
| { |
| struct sk_buff *skb = napi->skb; |
| struct ethhdr *eth; |
| unsigned int hlen; |
| unsigned int off; |
| |
| napi->skb = NULL; |
| |
| skb_reset_mac_header(skb); |
| skb_gro_reset_offset(skb); |
| |
| off = skb_gro_offset(skb); |
| hlen = off + sizeof(*eth); |
| eth = skb_gro_header_fast(skb, off); |
| if (skb_gro_header_hard(skb, hlen)) { |
| eth = skb_gro_header_slow(skb, hlen, off); |
| if (unlikely(!eth)) { |
| napi_reuse_skb(napi, skb); |
| skb = NULL; |
| goto out; |
| } |
| } |
| |
| skb_gro_pull(skb, sizeof(*eth)); |
| |
| /* |
| * This works because the only protocols we care about don't require |
| * special handling. We'll fix it up properly at the end. |
| */ |
| skb->protocol = eth->h_proto; |
| |
| out: |
| return skb; |
| } |
| EXPORT_SYMBOL(napi_frags_skb); |
| |
| gro_result_t napi_gro_frags(struct napi_struct *napi) |
| { |
| struct sk_buff *skb = napi_frags_skb(napi); |
| |
| if (!skb) |
| return GRO_DROP; |
| |
| return napi_frags_finish(napi, skb, __napi_gro_receive(napi, skb)); |
| } |
| EXPORT_SYMBOL(napi_gro_frags); |
| |
| static int process_backlog(struct napi_struct *napi, int quota) |
| { |
| int work = 0; |
| struct softnet_data *queue = &__get_cpu_var(softnet_data); |
| unsigned long start_time = jiffies; |
| |
| napi->weight = weight_p; |
| do { |
| struct sk_buff *skb; |
| |
| local_irq_disable(); |
| rps_lock(queue); |
| skb = __skb_dequeue(&queue->input_pkt_queue); |
| if (!skb) { |
| __napi_complete(napi); |
| rps_unlock(queue); |
| local_irq_enable(); |
| break; |
| } |
| incr_input_queue_head(queue); |
| rps_unlock(queue); |
| local_irq_enable(); |
| |
| __netif_receive_skb(skb); |
| } while (++work < quota && jiffies == start_time); |
| |
| return work; |
| } |
| |
| /** |
| * __napi_schedule - schedule for receive |
| * @n: entry to schedule |
| * |
| * The entry's receive function will be scheduled to run |
| */ |
| void __napi_schedule(struct napi_struct *n) |
| { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| list_add_tail(&n->poll_list, &__get_cpu_var(softnet_data).poll_list); |
| __raise_softirq_irqoff(NET_RX_SOFTIRQ); |
| local_irq_restore(flags); |
| } |
| EXPORT_SYMBOL(__napi_schedule); |
| |
| void __napi_complete(struct napi_struct *n) |
| { |
| BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state)); |
| BUG_ON(n->gro_list); |
| |
| list_del(&n->poll_list); |
| smp_mb__before_clear_bit(); |
| clear_bit(NAPI_STATE_SCHED, &n->state); |
| } |
| EXPORT_SYMBOL(__napi_complete); |
| |
| void napi_complete(struct napi_struct *n) |
| { |
| unsigned long flags; |
| |
| /* |
| * don't let napi dequeue from the cpu poll list |
| * just in case its running on a different cpu |
| */ |
| if (unlikely(test_bit(NAPI_STATE_NPSVC, &n->state))) |
| return; |
| |
| napi_gro_flush(n); |
| local_irq_save(flags); |
| __napi_complete(n); |
| local_irq_restore(flags); |
| } |
| EXPORT_SYMBOL(napi_complete); |
| |
| void netif_napi_add(struct net_device *dev, struct napi_struct *napi, |
| int (*poll)(struct napi_struct *, int), int weight) |
| { |
| INIT_LIST_HEAD(&napi->poll_list); |
| napi->gro_count = 0; |
| napi->gro_list = NULL; |
| napi->skb = NULL; |
| napi->poll = poll; |
| napi->weight = weight; |
| list_add(&napi->dev_list, &dev->napi_list); |
| napi->dev = dev; |
| #ifdef CONFIG_NETPOLL |
| spin_lock_init(&napi->poll_lock); |
| napi->poll_owner = -1; |
| #endif |
| set_bit(NAPI_STATE_SCHED, &napi->state); |
| } |
| EXPORT_SYMBOL(netif_napi_add); |
| |
| void netif_napi_del(struct napi_struct *napi) |
| { |
| struct sk_buff *skb, *next; |
| |
| list_del_init(&napi->dev_list); |
| napi_free_frags(napi); |
| |
| for (skb = napi->gro_list; skb; skb = next) { |
| next = skb->next; |
| skb->next = NULL; |
| kfree_skb(skb); |
| } |
| |
| napi->gro_list = NULL; |
| napi->gro_count = 0; |
| } |
| EXPORT_SYMBOL(netif_napi_del); |
| |
| #ifdef CONFIG_RPS |
| /* |
| * net_rps_action sends any pending IPI's for rps. This is only called from |
| * softirq and interrupts must be enabled. |
| */ |
| static void net_rps_action(cpumask_t *mask) |
| { |
| int cpu; |
| |
| /* Send pending IPI's to kick RPS processing on remote cpus. */ |
| for_each_cpu_mask_nr(cpu, *mask) { |
| struct softnet_data *queue = &per_cpu(softnet_data, cpu); |
| if (cpu_online(cpu)) |
| __smp_call_function_single(cpu, &queue->csd, 0); |
| } |
| cpus_clear(*mask); |
| } |
| #endif |
| |
| static void net_rx_action(struct softirq_action *h) |
| { |
| struct list_head *list = &__get_cpu_var(softnet_data).poll_list; |
| unsigned long time_limit = jiffies + 2; |
| int budget = netdev_budget; |
| void *have; |
| #ifdef CONFIG_RPS |
| int select; |
| struct rps_remote_softirq_cpus *rcpus; |
| #endif |
| |
| local_irq_disable(); |
| |
| while (!list_empty(list)) { |
| struct napi_struct *n; |
| int work, weight; |
| |
| /* If softirq window is exhuasted then punt. |
| * Allow this to run for 2 jiffies since which will allow |
| * an average latency of 1.5/HZ. |
| */ |
| if (unlikely(budget <= 0 || time_after(jiffies, time_limit))) |
| goto softnet_break; |
| |
| local_irq_enable(); |
| |
| /* Even though interrupts have been re-enabled, this |
| * access is safe because interrupts can only add new |
| * entries to the tail of this list, and only ->poll() |
| * calls can remove this head entry from the list. |
| */ |
| n = list_first_entry(list, struct napi_struct, poll_list); |
| |
| have = netpoll_poll_lock(n); |
| |
| weight = n->weight; |
| |
| /* This NAPI_STATE_SCHED test is for avoiding a race |
| * with netpoll's poll_napi(). Only the entity which |
| * obtains the lock and sees NAPI_STATE_SCHED set will |
| * actually make the ->poll() call. Therefore we avoid |
| * accidently calling ->poll() when NAPI is not scheduled. |
| */ |
| work = 0; |
| if (test_bit(NAPI_STATE_SCHED, &n->state)) { |
| work = n->poll(n, weight); |
| trace_napi_poll(n); |
| } |
| |
| WARN_ON_ONCE(work > weight); |
| |
| budget -= work; |
| |
| local_irq_disable(); |
| |
| /* Drivers must not modify the NAPI state if they |
| * consume the entire weight. In such cases this code |
| * still "owns" the NAPI instance and therefore can |
| * move the instance around on the list at-will. |
| */ |
| if (unlikely(work == weight)) { |
| if (unlikely(napi_disable_pending(n))) { |
| local_irq_enable(); |
| napi_complete(n); |
| local_irq_disable(); |
| } else |
| list_move_tail(&n->poll_list, list); |
| } |
| |
| netpoll_poll_unlock(have); |
| } |
| out: |
| #ifdef CONFIG_RPS |
| rcpus = &__get_cpu_var(rps_remote_softirq_cpus); |
| select = rcpus->select; |
| rcpus->select ^= 1; |
| |
| local_irq_enable(); |
| |
| net_rps_action(&rcpus->mask[select]); |
| #else |
| local_irq_enable(); |
| #endif |
| |
| #ifdef CONFIG_NET_DMA |
| /* |
| * There may not be any more sk_buffs coming right now, so push |
| * any pending DMA copies to hardware |
| */ |
| dma_issue_pending_all(); |
| #endif |
| |
| return; |
| |
| softnet_break: |
| __get_cpu_var(netdev_rx_stat).time_squeeze++; |
| __raise_softirq_irqoff(NET_RX_SOFTIRQ); |
| goto out; |
| } |
| |
| static gifconf_func_t *gifconf_list[NPROTO]; |
| |
| /** |
| * register_gifconf - register a SIOCGIF handler |
| * @family: Address family |
| * @gifconf: Function handler |
| * |
| * Register protocol dependent address dumping routines. The handler |
| * that is passed must not be freed or reused until it has been replaced |
| * by another handler. |
| */ |
| int register_gifconf(unsigned int family, gifconf_func_t *gifconf) |
| { |
| if (family >= NPROTO) |
| return -EINVAL; |
| gifconf_list[family] = gifconf; |
| return 0; |
| } |
| EXPORT_SYMBOL(register_gifconf); |
| |
| |
| /* |
| * Map an interface index to its name (SIOCGIFNAME) |
| */ |
| |
| /* |
| * We need this ioctl for efficient implementation of the |
| * if_indextoname() function required by the IPv6 API. Without |
| * it, we would have to search all the interfaces to find a |
| * match. --pb |
| */ |
| |
| static int dev_ifname(struct net *net, struct ifreq __user *arg) |
| { |
| struct net_device *dev; |
| struct ifreq ifr; |
| |
| /* |
| * Fetch the caller's info block. |
| */ |
| |
| if (copy_from_user(&ifr, arg, sizeof(struct ifreq))) |
| return -EFAULT; |
| |
| rcu_read_lock(); |
| dev = dev_get_by_index_rcu(net, ifr.ifr_ifindex); |
| if (!dev) { |
| rcu_read_unlock(); |
| return -ENODEV; |
| } |
| |
| strcpy(ifr.ifr_name, dev->name); |
| rcu_read_unlock(); |
| |
| if (copy_to_user(arg, &ifr, sizeof(struct ifreq))) |
| return -EFAULT; |
| return 0; |
| } |
| |
| /* |
| * Perform a SIOCGIFCONF call. This structure will change |
| * size eventually, and there is nothing I can do about it. |
| * Thus we will need a 'compatibility mode'. |
| */ |
| |
| static int dev_ifconf(struct net *net, char __user *arg) |
| { |
| struct ifconf ifc; |
| struct net_device *dev; |
| char __user *pos; |
| int len; |
| int total; |
| int i; |
| |
| /* |
| * Fetch the caller's info block. |
| */ |
| |
| if (copy_from_user(&ifc, arg, sizeof(struct ifconf))) |
| return -EFAULT; |
| |
| pos = ifc.ifc_buf; |
| len = ifc.ifc_len; |
| |
| /* |
| * Loop over the interfaces, and write an info block for each. |
| */ |
| |
| total = 0; |
| for_each_netdev(net, dev) { |
| for (i = 0; i < NPROTO; i++) { |
| if (gifconf_list[i]) { |
| int done; |
| if (!pos) |
| done = gifconf_list[i](dev, NULL, 0); |
| else |
| done = gifconf_list[i](dev, pos + total, |
| len - total); |
| if (done < 0) |
| return -EFAULT; |
| total += done; |
| } |
| } |
| } |
| |
| /* |
| * All done. Write the updated control block back to the caller. |
| */ |
| ifc.ifc_len = total; |
| |
| /* |
| * Both BSD and Solaris return 0 here, so we do too. |
| */ |
| return copy_to_user(arg, &ifc, sizeof(struct ifconf)) ? -EFAULT : 0; |
| } |
| |
| #ifdef CONFIG_PROC_FS |
| /* |
| * This is invoked by the /proc filesystem handler to display a device |
| * in detail. |
| */ |
| void *dev_seq_start(struct seq_file *seq, loff_t *pos) |
| __acquires(RCU) |
| { |
| struct net *net = seq_file_net(seq); |
| loff_t off; |
| struct net_device *dev; |
| |
| rcu_read_lock(); |
| if (!*pos) |
| return SEQ_START_TOKEN; |
| |
| off = 1; |
| for_each_netdev_rcu(net, dev) |
| if (off++ == *pos) |
| return dev; |
| |
| return NULL; |
| } |
| |
| void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos) |
| { |
| struct net_device *dev = (v == SEQ_START_TOKEN) ? |
| first_net_device(seq_file_net(seq)) : |
| next_net_device((struct net_device *)v); |
| |
| ++*pos; |
| return rcu_dereference(dev); |
| } |
| |
| void dev_seq_stop(struct seq_file *seq, void *v) |
| __releases(RCU) |
| { |
| rcu_read_unlock(); |
| } |
| |
| static void dev_seq_printf_stats(struct seq_file *seq, struct net_device *dev) |
| { |
| const struct net_device_stats *stats = dev_get_stats(dev); |
| |
| seq_printf(seq, "%6s: %7lu %7lu %4lu %4lu %4lu %5lu %10lu %9lu " |
| "%8lu %7lu %4lu %4lu %4lu %5lu %7lu %10lu\n", |
| dev->name, stats->rx_bytes, stats->rx_packets, |
| stats->rx_errors, |
| stats->rx_dropped + stats->rx_missed_errors, |
| stats->rx_fifo_errors, |
| stats->rx_length_errors + stats->rx_over_errors + |
| stats->rx_crc_errors + stats->rx_frame_errors, |
| stats->rx_compressed, stats->multicast, |
| stats->tx_bytes, stats->tx_packets, |
| stats->tx_errors, stats->tx_dropped, |
| stats->tx_fifo_errors, stats->collisions, |
| stats->tx_carrier_errors + |
| stats->tx_aborted_errors + |
| stats->tx_window_errors + |
| stats->tx_heartbeat_errors, |
| stats->tx_compressed); |
| } |
| |
| /* |
| * Called from the PROCfs module. This now uses the new arbitrary sized |
| * /proc/net interface to create /proc/net/dev |
| */ |
| static int dev_seq_show(struct seq_file *seq, void *v) |
| { |
| if (v == SEQ_START_TOKEN) |
| seq_puts(seq, "Inter-| Receive " |
| " | Transmit\n" |
| " face |bytes packets errs drop fifo frame " |
| "compressed multicast|bytes packets errs " |
| "drop fifo colls carrier compressed\n"); |
| else |
| dev_seq_printf_stats(seq, v); |
| return 0; |
| } |
| |
| static struct netif_rx_stats *softnet_get_online(loff_t *pos) |
| { |
| struct netif_rx_stats *rc = NULL; |
| |
| while (*pos < nr_cpu_ids) |
| if (cpu_online(*pos)) { |
| rc = &per_cpu(netdev_rx_stat, *pos); |
| break; |
| } else |
| ++*pos; |
| return rc; |
| } |
| |
| static void *softnet_seq_start(struct seq_file *seq, loff_t *pos) |
| { |
| return softnet_get_online(pos); |
| } |
| |
| static void *softnet_seq_next(struct seq_file *seq, void *v, loff_t *pos) |
| { |
| ++*pos; |
| return softnet_get_online(pos); |
| } |
| |
| static void softnet_seq_stop(struct seq_file *seq, void *v) |
| { |
| } |
| |
| static int softnet_seq_show(struct seq_file *seq, void *v) |
| { |
| struct netif_rx_stats *s = v; |
| |
| seq_printf(seq, "%08x %08x %08x %08x %08x %08x %08x %08x %08x %08x\n", |
| s->total, s->dropped, s->time_squeeze, 0, |
| 0, 0, 0, 0, /* was fastroute */ |
| s->cpu_collision, s->received_rps); |
| return 0; |
| } |
| |
| static const struct seq_operations dev_seq_ops = { |
| .start = dev_seq_start, |
| .next = dev_seq_next, |
| .stop = dev_seq_stop, |
| .show = dev_seq_show, |
| }; |
| |
| static int dev_seq_open(struct inode *inode, struct file *file) |
| { |
| return seq_open_net(inode, file, &dev_seq_ops, |
| sizeof(struct seq_net_private)); |
| } |
| |
| static const struct file_operations dev_seq_fops = { |
| .owner = THIS_MODULE, |
| .open = dev_seq_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = seq_release_net, |
| }; |
| |
| static const struct seq_operations softnet_seq_ops = { |
| .start = softnet_seq_start, |
| .next = softnet_seq_next, |
| .stop = softnet_seq_stop, |
| .show = softnet_seq_show, |
| }; |
| |
| static int softnet_seq_open(struct inode *inode, struct file *file) |
| { |
| return seq_open(file, &softnet_seq_ops); |
| } |
| |
| static const struct file_operations softnet_seq_fops = { |
| .owner = THIS_MODULE, |
| .open = softnet_seq_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = seq_release, |
| }; |
| |
| static void *ptype_get_idx(loff_t pos) |
| { |
| struct packet_type *pt = NULL; |
| loff_t i = 0; |
| int t; |
| |
| list_for_each_entry_rcu(pt, &ptype_all, list) { |
| if (i == pos) |
| return pt; |
| ++i; |
| } |
| |
| for (t = 0; t < PTYPE_HASH_SIZE; t++) { |
| list_for_each_entry_rcu(pt, &ptype_base[t], list) { |
| if (i == pos) |
| return pt; |
| ++i; |
| } |
| } |
| return NULL; |
| } |
| |
| static void *ptype_seq_start(struct seq_file *seq, loff_t *pos) |
| __acquires(RCU) |
| { |
| rcu_read_lock(); |
| return *pos ? ptype_get_idx(*pos - 1) : SEQ_START_TOKEN; |
| } |
| |
| static void *ptype_seq_next(struct seq_file *seq, void *v, loff_t *pos) |
| { |
| struct packet_type *pt; |
| struct list_head *nxt; |
| int hash; |
| |
| ++*pos; |
| if (v == SEQ_START_TOKEN) |
| return ptype_get_idx(0); |
| |
| pt = v; |
| nxt = pt->list.next; |
| if (pt->type == htons(ETH_P_ALL)) { |
| if (nxt != &ptype_all) |
| goto found; |
| hash = 0; |
| nxt = ptype_base[0].next; |
| } else |
| hash = ntohs(pt->type) & PTYPE_HASH_MASK; |
| |
| while (nxt == &ptype_base[hash]) { |
| if (++hash >= PTYPE_HASH_SIZE) |
| return NULL; |
| nxt = ptype_base[hash].next; |
| } |
| found: |
| return list_entry(nxt, struct packet_type, list); |
| } |
| |
| static void ptype_seq_stop(struct seq_file *seq, void *v) |
| __releases(RCU) |
| { |
| rcu_read_unlock(); |
| } |
| |
| static int ptype_seq_show(struct seq_file *seq, void *v) |
| { |
| struct packet_type *pt = v; |
| |
| if (v == SEQ_START_TOKEN) |
| seq_puts(seq, "Type Device Function\n"); |
| else if (pt->dev == NULL || dev_net(pt->dev) == seq_file_net(seq)) { |
| if (pt->type == htons(ETH_P_ALL)) |
| seq_puts(seq, "ALL "); |
| else |
| seq_printf(seq, "%04x", ntohs(pt->type)); |
| |
| seq_printf(seq, " %-8s %pF\n", |
| pt->dev ? pt->dev->name : "", pt->func); |
| } |
| |
| return 0; |
| } |
| |
| static const struct seq_operations ptype_seq_ops = { |
| .start = ptype_seq_start, |
| .next = ptype_seq_next, |
| .stop = ptype_seq_stop, |
| .show = ptype_seq_show, |
| }; |
| |
| static int ptype_seq_open(struct inode *inode, struct file *file) |
| { |
| return seq_open_net(inode, file, &ptype_seq_ops, |
| sizeof(struct seq_net_private)); |
| } |
| |
| static const struct file_operations ptype_seq_fops = { |
| .owner = THIS_MODULE, |
| .open = ptype_seq_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = seq_release_net, |
| }; |
| |
| |
| static int __net_init dev_proc_net_init(struct net *net) |
| { |
| int rc = -ENOMEM; |
| |
| if (!proc_net_fops_create(net, "dev", S_IRUGO, &dev_seq_fops)) |
| goto out; |
| if (!proc_net_fops_create(net, "softnet_stat", S_IRUGO, &softnet_seq_fops)) |
| goto out_dev; |
| if (!proc_net_fops_create(net, "ptype", S_IRUGO, &ptype_seq_fops)) |
| goto out_softnet; |
| |
| if (wext_proc_init(net)) |
| goto out_ptype; |
| rc = 0; |
| out: |
| return rc; |
| out_ptype: |
| proc_net_remove(net, "ptype"); |
| out_softnet: |
| proc_net_remove(net, "softnet_stat"); |
| out_dev: |
| proc_net_remove(net, "dev"); |
| goto out; |
| } |
| |
| static void __net_exit dev_proc_net_exit(struct net *net) |
| { |
| wext_proc_exit(net); |
| |
| proc_net_remove(net, "ptype"); |
| proc_net_remove(net, "softnet_stat"); |
| proc_net_remove(net, "dev"); |
| } |
| |
| static struct pernet_operations __net_initdata dev_proc_ops = { |
| .init = dev_proc_net_init, |
| .exit = dev_proc_net_exit, |
| }; |
| |
| static int __init dev_proc_init(void) |
| { |
| return register_pernet_subsys(&dev_proc_ops); |
| } |
| #else |
| #define dev_proc_init() 0 |
| #endif /* CONFIG_PROC_FS */ |
| |
| |
| /** |
| * netdev_set_master - set up master/slave pair |
| * @slave: slave device |
| * @master: new master device |
| * |
| * Changes the master device of the slave. Pass %NULL to break the |
| * bonding. The caller must hold the RTNL semaphore. On a failure |
| * a negative errno code is returned. On success the reference counts |
| * are adjusted, %RTM_NEWLINK is sent to the routing socket and the |
| * function returns zero. |
| */ |
| int netdev_set_master(struct net_device *slave, struct net_device *master) |
| { |
| struct net_device *old = slave->master; |
| |
| ASSERT_RTNL(); |
| |
| if (master) { |
| if (old) |
| return -EBUSY; |
| dev_hold(master); |
| } |
| |
| slave->master = master; |
| |
| if (old) { |
| synchronize_net(); |
| dev_put(old); |
| } |
| if (master) |
| slave->flags |= IFF_SLAVE; |
| else |
| slave->flags &= ~IFF_SLAVE; |
| |
| rtmsg_ifinfo(RTM_NEWLINK, slave, IFF_SLAVE); |
| return 0; |
| } |
| EXPORT_SYMBOL(netdev_set_master); |
| |
| static void dev_change_rx_flags(struct net_device *dev, int flags) |
| { |
| const struct net_device_ops *ops = dev->netdev_ops; |
| |
| if ((dev->flags & IFF_UP) && ops->ndo_change_rx_flags) |
| ops->ndo_change_rx_flags(dev, flags); |
| } |
| |
| static int __dev_set_promiscuity(struct net_device *dev, int inc) |
| { |
| unsigned short old_flags = dev->flags; |
| uid_t uid; |
| gid_t gid; |
| |
| ASSERT_RTNL(); |
| |
| dev->flags |= IFF_PROMISC; |
| dev->promiscuity += inc; |
| if (dev->promiscuity == 0) { |
| /* |
| * Avoid overflow. |
| * If inc causes overflow, untouch promisc and return error. |
| */ |
| if (inc < 0) |
| dev->flags &= ~IFF_PROMISC; |
| else { |
| dev->promiscuity -= inc; |
| printk(KERN_WARNING "%s: promiscuity touches roof, " |
| "set promiscuity failed, promiscuity feature " |
| "of device might be broken.\n", dev->name); |
| return -EOVERFLOW; |
| } |
| } |
| if (dev->flags != old_flags) { |
| printk(KERN_INFO "device %s %s promiscuous mode\n", |
| dev->name, (dev->flags & IFF_PROMISC) ? "entered" : |
| "left"); |
| if (audit_enabled) { |
| current_uid_gid(&uid, &gid); |
| audit_log(current->audit_context, GFP_ATOMIC, |
| AUDIT_ANOM_PROMISCUOUS, |
| "dev=%s prom=%d old_prom=%d auid=%u uid=%u gid=%u ses=%u", |
| dev->name, (dev->flags & IFF_PROMISC), |
| (old_flags & IFF_PROMISC), |
| audit_get_loginuid(current), |
| uid, gid, |
| audit_get_sessionid(current)); |
| } |
| |
| dev_change_rx_flags(dev, IFF_PROMISC); |
| } |
| return 0; |
| } |
| |
| /** |
| * dev_set_promiscuity - update promiscuity count on a device |
| * @dev: device |
| * @inc: modifier |
| * |
| * Add or remove promiscuity from a device. While the count in the device |
| * remains above zero the interface remains promiscuous. Once it hits zero |
| * the device reverts back to normal filtering operation. A negative inc |
| * value is used to drop promiscuity on the device. |
| * Return 0 if successful or a negative errno code on error. |
| */ |
| int dev_set_promiscuity(struct net_device *dev, int inc) |
| { |
| unsigned short old_flags = dev->flags; |
| int err; |
| |
| err = __dev_set_promiscuity(dev, inc); |
| if (err < 0) |
| return err; |
| if (dev->flags != old_flags) |
| dev_set_rx_mode(dev); |
| return err; |
| } |
| EXPORT_SYMBOL(dev_set_promiscuity); |
| |
| /** |
| * dev_set_allmulti - update allmulti count on a device |
| * @dev: device |
| * @inc: modifier |
| * |
| * Add or remove reception of all multicast frames to a device. While the |
| * count in the device remains above zero the interface remains listening |
| * to all interfaces. Once it hits zero the device reverts back to normal |
| * filtering operation. A negative @inc value is used to drop the counter |
| * when releasing a resource needing all multicasts. |
| * Return 0 if successful or a negative errno code on error. |
| */ |
| |
| int dev_set_allmulti(struct net_device *dev, int inc) |
| { |
| unsigned short old_flags = dev->flags; |
| |
| ASSERT_RTNL(); |
| |
| dev->flags |= IFF_ALLMULTI; |
| dev->allmulti += inc; |
| if (dev->allmulti == 0) { |
| /* |
| * Avoid overflow. |
| * If inc causes overflow, untouch allmulti and return error. |
| */ |
| if (inc < 0) |
| dev->flags &= ~IFF_ALLMULTI; |
| else { |
| dev->allmulti -= inc; |
| printk(KERN_WARNING "%s: allmulti touches roof, " |
| "set allmulti failed, allmulti feature of " |
| "device might be broken.\n", dev->name); |
| return -EOVERFLOW; |
| } |
| } |
| if (dev->flags ^ old_flags) { |
| dev_change_rx_flags(dev, IFF_ALLMULTI); |
| dev_set_rx_mode(dev); |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(dev_set_allmulti); |
| |
| /* |
| * Upload unicast and multicast address lists to device and |
| * configure RX filtering. When the device doesn't support unicast |
| * filtering it is put in promiscuous mode while unicast addresses |
| * are present. |
| */ |
| void __dev_set_rx_mode(struct net_device *dev) |
| { |
| const struct net_device_ops *ops = dev->netdev_ops; |
| |
| /* dev_open will call this function so the list will stay sane. */ |
| if (!(dev->flags&IFF_UP)) |
| return; |
| |
| if (!netif_device_present(dev)) |
| return; |
| |
| if (ops->ndo_set_rx_mode) |
| ops->ndo_set_rx_mode(dev); |
| else { |
| /* Unicast addresses changes may only happen under the rtnl, |
| * therefore calling __dev_set_promiscuity here is safe. |
| */ |
| if (!netdev_uc_empty(dev) && !dev->uc_promisc) { |
| __dev_set_promiscuity(dev, 1); |
| dev->uc_promisc = 1; |
| } else if (netdev_uc_empty(dev) && dev->uc_promisc) { |
| __dev_set_promiscuity(dev, -1); |
| dev->uc_promisc = 0; |
| } |
| |
| if (ops->ndo_set_multicast_list) |
| ops->ndo_set_multicast_list(dev); |
| } |
| } |
| |
| void dev_set_rx_mode(struct net_device *dev) |
| { |
| netif_addr_lock_bh(dev); |
| __dev_set_rx_mode(dev); |
| netif_addr_unlock_bh(dev); |
| } |
| |
| /** |
| * dev_get_flags - get flags reported to userspace |
| * @dev: device |
| * |
| * Get the combination of flag bits exported through APIs to userspace. |
| */ |
| unsigned dev_get_flags(const struct net_device *dev) |
| { |
| unsigned flags; |
| |
| flags = (dev->flags & ~(IFF_PROMISC | |
| IFF_ALLMULTI | |
| IFF_RUNNING | |
| IFF_LOWER_UP | |
| IFF_DORMANT)) | |
| (dev->gflags & (IFF_PROMISC | |
| IFF_ALLMULTI)); |
| |
| if (netif_running(dev)) { |
| if (netif_oper_up(dev)) |
| flags |= IFF_RUNNING; |
| if (netif_carrier_ok(dev)) |
| flags |= IFF_LOWER_UP; |
| if (netif_dormant(dev)) |
| flags |= IFF_DORMANT; |
| } |
| |
| return flags; |
| } |
| EXPORT_SYMBOL(dev_get_flags); |
| |
| int __dev_change_flags(struct net_device *dev, unsigned int flags) |
| { |
| int old_flags = dev->flags; |
| int ret; |
| |
| ASSERT_RTNL(); |
| |
| /* |
| * Set the flags on our device. |
| */ |
| |
| dev->flags = (flags & (IFF_DEBUG | IFF_NOTRAILERS | IFF_NOARP | |
| IFF_DYNAMIC | IFF_MULTICAST | IFF_PORTSEL | |
| IFF_AUTOMEDIA)) | |
| (dev->flags & (IFF_UP | IFF_VOLATILE | IFF_PROMISC | |
| IFF_ALLMULTI)); |
| |
| /* |
| * Load in the correct multicast list now the flags have changed. |
| */ |
| |
| if ((old_flags ^ flags) & IFF_MULTICAST) |
| dev_change_rx_flags(dev, IFF_MULTICAST); |
| |
| dev_set_rx_mode(dev); |
| |
| /* |
| * Have we downed the interface. We handle IFF_UP ourselves |
| * according to user attempts to set it, rather than blindly |
| * setting it. |
| */ |
| |
| ret = 0; |
| if ((old_flags ^ flags) & IFF_UP) { /* Bit is different ? */ |
| ret = ((old_flags & IFF_UP) ? __dev_close : __dev_open)(dev); |
| |
| if (!ret) |
| dev_set_rx_mode(dev); |
| } |
| |
| if ((flags ^ dev->gflags) & IFF_PROMISC) { |
| int inc = (flags & IFF_PROMISC) ? 1 : -1; |
| |
| dev->gflags ^= IFF_PROMISC; |
| dev_set_promiscuity(dev, inc); |
| } |
| |
| /* NOTE: order of synchronization of IFF_PROMISC and IFF_ALLMULTI |
| is important. Some (broken) drivers set IFF_PROMISC, when |
| IFF_ALLMULTI is requested not asking us and not reporting. |
| */ |
| if ((flags ^ dev->gflags) & IFF_ALLMULTI) { |
| int inc = (flags & IFF_ALLMULTI) ? 1 : -1; |
| |
| dev->gflags ^= IFF_ALLMULTI; |
| dev_set_allmulti(dev, inc); |
| } |
| |
| return ret; |
| } |
| |
| void __dev_notify_flags(struct net_device *dev, unsigned int old_flags) |
| { |
| unsigned int changes = dev->flags ^ old_flags; |
| |
| if (changes & IFF_UP) { |
| if (dev->flags & IFF_UP) |
| call_netdevice_notifiers(NETDEV_UP, dev); |
| else |
| call_netdevice_notifiers(NETDEV_DOWN, dev); |
| } |
| |
| if (dev->flags & IFF_UP && |
| (changes & ~(IFF_UP | IFF_PROMISC | IFF_ALLMULTI | IFF_VOLATILE))) |
| call_netdevice_notifiers(NETDEV_CHANGE, dev); |
| } |
| |
| /** |
| * dev_change_flags - change device settings |
| * @dev: device |
| * @flags: device state flags |
| * |
| * Change settings on device based state flags. The flags are |
| * in the userspace exported format. |
| */ |
| int dev_change_flags(struct net_device *dev, unsigned flags) |
| { |
| int ret, changes; |
| int old_flags = dev->flags; |
| |
| ret = __dev_change_flags(dev, flags); |
| if (ret < 0) |
| return ret; |
| |
| changes = old_flags ^ dev->flags; |
| if (changes) |
| rtmsg_ifinfo(RTM_NEWLINK, dev, changes); |
| |
| __dev_notify_flags(dev, old_flags); |
| return ret; |
| } |
| EXPORT_SYMBOL(dev_change_flags); |
| |
| /** |
| * dev_set_mtu - Change maximum transfer unit |
| * @dev: device |
| * @new_mtu: new transfer unit |
| * |
| * Change the maximum transfer size of the network device. |
| */ |
| int dev_set_mtu(struct net_device *dev, int new_mtu) |
| { |
| const struct net_device_ops *ops = dev->netdev_ops; |
| int err; |
| |
| if (new_mtu == dev->mtu) |
| return 0; |
| |
| /* MTU must be positive. */ |
| if (new_mtu < 0) |
| return -EINVAL; |
| |
| if (!netif_device_present(dev)) |
| return -ENODEV; |
| |
| err = 0; |
| if (ops->ndo_change_mtu) |
| err = ops->ndo_change_mtu(dev, new_mtu); |
| else |
| dev->mtu = new_mtu; |
| |
| if (!err && dev->flags & IFF_UP) |
| call_netdevice_notifiers(NETDEV_CHANGEMTU, dev); |
| return err; |
| } |
| EXPORT_SYMBOL(dev_set_mtu); |
| |
| /** |
| * dev_set_mac_address - Change Media Access Control Address |
| * @dev: device |
| * @sa: new address |
| * |
| * Change the hardware (MAC) address of the device |
| */ |
| int dev_set_mac_address(struct net_device *dev, struct sockaddr *sa) |
| { |
| const struct net_device_ops *ops = dev->netdev_ops; |
| int err; |
| |
| if (!ops->ndo_set_mac_address) |
| return -EOPNOTSUPP; |
| if (sa->sa_family != dev->type) |
| return -EINVAL; |
| if (!netif_device_present(dev)) |
| return -ENODEV; |
| err = ops->ndo_set_mac_address(dev, sa); |
| if (!err) |
| call_netdevice_notifiers(NETDEV_CHANGEADDR, dev); |
| return err; |
| } |
| EXPORT_SYMBOL(dev_set_mac_address); |
| |
| /* |
| * Perform the SIOCxIFxxx calls, inside rcu_read_lock() |
| */ |
| static int dev_ifsioc_locked(struct net *net, struct ifreq *ifr, unsigned int cmd) |
| { |
| int err; |
| struct net_device *dev = dev_get_by_name_rcu(net, ifr->ifr_name); |
| |
| if (!dev) |
| return -ENODEV; |
| |
| switch (cmd) { |
| case SIOCGIFFLAGS: /* Get interface flags */ |
| ifr->ifr_flags = (short) dev_get_flags(dev); |
| return 0; |
| |
| case SIOCGIFMETRIC: /* Get the metric on the interface |
| (currently unused) */ |
| ifr->ifr_metric = 0; |
| return 0; |
| |
| case SIOCGIFMTU: /* Get the MTU of a device */ |
| ifr->ifr_mtu = dev->mtu; |
| return 0; |
| |
| case SIOCGIFHWADDR: |
| if (!dev->addr_len) |
| memset(ifr->ifr_hwaddr.sa_data, 0, sizeof ifr->ifr_hwaddr.sa_data); |
| else |
| memcpy(ifr->ifr_hwaddr.sa_data, dev->dev_addr, |
| min(sizeof ifr->ifr_hwaddr.sa_data, (size_t) dev->addr_len)); |
| ifr->ifr_hwaddr.sa_family = dev->type; |
| return 0; |
| |
| case SIOCGIFSLAVE: |
| err = -EINVAL; |
| break; |
| |
| case SIOCGIFMAP: |
| ifr->ifr_map.mem_start = dev->mem_start; |
| ifr->ifr_map.mem_end = dev->mem_end; |
| ifr->ifr_map.base_addr = dev->base_addr; |
| ifr->ifr_map.irq = dev->irq; |
| ifr->ifr_map.dma = dev->dma; |
| ifr->ifr_map.port = dev->if_port; |
| return 0; |
| |
| case SIOCGIFINDEX: |
| ifr->ifr_ifindex = dev->ifindex; |
| return 0; |
| |
| case SIOCGIFTXQLEN: |
| ifr->ifr_qlen = dev->tx_queue_len; |
| return 0; |
| |
| default: |
| /* dev_ioctl() should ensure this case |
| * is never reached |
| */ |
| WARN_ON(1); |
| err = -EINVAL; |
| break; |
| |
| } |
| return err; |
| } |
| |
| /* |
| * Perform the SIOCxIFxxx calls, inside rtnl_lock() |
| */ |
| static int dev_ifsioc(struct net *net, struct ifreq *ifr, unsigned int cmd) |
| { |
| int err; |
| struct net_device *dev = __dev_get_by_name(net, ifr->ifr_name); |
| const struct net_device_ops *ops; |
| |
| if (!dev) |
| return -ENODEV; |
| |
| ops = dev->netdev_ops; |
| |
| switch (cmd) { |
| case SIOCSIFFLAGS: /* Set interface flags */ |
| return dev_change_flags(dev, ifr->ifr_flags); |
| |
| case SIOCSIFMETRIC: /* Set the metric on the interface |
| (currently unused) */ |
| return -EOPNOTSUPP; |
| |
| case SIOCSIFMTU: /* Set the MTU of a device */ |
| return dev_set_mtu(dev, ifr->ifr_mtu); |
| |
| case SIOCSIFHWADDR: |
| return dev_set_mac_address(dev, &ifr->ifr_hwaddr); |
| |
| case SIOCSIFHWBROADCAST: |
| if (ifr->ifr_hwaddr.sa_family != dev->type) |
| return -EINVAL; |
| memcpy(dev->broadcast, ifr->ifr_hwaddr.sa_data, |
| min(sizeof ifr->ifr_hwaddr.sa_data, (size_t) dev->addr_len)); |
| call_netdevice_notifiers(NETDEV_CHANGEADDR, dev); |
| return 0; |
| |
| case SIOCSIFMAP: |
| if (ops->ndo_set_config) { |
| if (!netif_device_present(dev)) |
| return -ENODEV; |
| return ops->ndo_set_config(dev, &ifr->ifr_map); |
| } |
| return -EOPNOTSUPP; |
| |
| case SIOCADDMULTI: |
| if ((!ops->ndo_set_multicast_list && !ops->ndo_set_rx_mode) || |
| ifr->ifr_hwaddr.sa_family != AF_UNSPEC) |
| return -EINVAL; |
| if (!netif_device_present(dev)) |
| return -ENODEV; |
| return dev_mc_add_global(dev, ifr->ifr_hwaddr.sa_data); |
| |
| case SIOCDELMULTI: |
| if ((!ops->ndo_set_multicast_list && !ops->ndo_set_rx_mode) || |
| ifr->ifr_hwaddr.sa_family != AF_UNSPEC) |
| return -EINVAL; |
| if (!netif_device_present(dev)) |
| return -ENODEV; |
| return dev_mc_del_global(dev, ifr->ifr_hwaddr.sa_data); |
| |
| case SIOCSIFTXQLEN: |
| if (ifr->ifr_qlen < 0) |
| return -EINVAL; |
| dev->tx_queue_len = ifr->ifr_qlen; |
| return 0; |
| |
| case SIOCSIFNAME: |
| ifr->ifr_newname[IFNAMSIZ-1] = '\0'; |
| return dev_change_name(dev, ifr->ifr_newname); |
| |
| /* |
| * Unknown or private ioctl |
| */ |
| default: |
| if ((cmd >= SIOCDEVPRIVATE && |
| cmd <= SIOCDEVPRIVATE + 15) || |
| cmd == SIOCBONDENSLAVE || |
| cmd == SIOCBONDRELEASE || |
| cmd == SIOCBONDSETHWADDR || |
| cmd == SIOCBONDSLAVEINFOQUERY || |
| cmd == SIOCBONDINFOQUERY || |
| cmd == SIOCBONDCHANGEACTIVE || |
| cmd == SIOCGMIIPHY || |
| cmd == SIOCGMIIREG || |
| cmd == SIOCSMIIREG || |
| cmd == SIOCBRADDIF || |
| cmd == SIOCBRDELIF || |
| cmd == SIOCSHWTSTAMP || |
| cmd == SIOCWANDEV) { |
| err = -EOPNOTSUPP; |
| if (ops->ndo_do_ioctl) { |
| if (netif_device_present(dev)) |
| err = ops->ndo_do_ioctl(dev, ifr, cmd); |
| else |
| err = -ENODEV; |
| } |
| } else |
| err = -EINVAL; |
| |
| } |
| return err; |
| } |
| |
| /* |
| * This function handles all "interface"-type I/O control requests. The actual |
| * 'doing' part of this is dev_ifsioc above. |
| */ |
| |
| /** |
| * dev_ioctl - network device ioctl |
| * @net: the applicable net namespace |
| * @cmd: command to issue |
| * @arg: pointer to a struct ifreq in user space |
| * |
| * Issue ioctl functions to devices. This is normally called by the |
| * user space syscall interfaces but can sometimes be useful for |
| * other purposes. The return value is the return from the syscall if |
| * positive or a negative errno code on error. |
| */ |
| |
| int dev_ioctl(struct net *net, unsigned int cmd, void __user *arg) |
| { |
| struct ifreq ifr; |
| int ret; |
| char *colon; |
| |
| /* One special case: SIOCGIFCONF takes ifconf argument |
| and requires shared lock, because it sleeps writing |
| to user space. |
| */ |
| |
| if (cmd == SIOCGIFCONF) { |
| rtnl_lock(); |
| ret = dev_ifconf(net, (char __user *) arg); |
| rtnl_unlock(); |
| return ret; |
| } |
| if (cmd == SIOCGIFNAME) |
| return dev_ifname(net, (struct ifreq __user *)arg); |
| |
| if (copy_from_user(&ifr, arg, sizeof(struct ifreq))) |
| return -EFAULT; |
| |
| ifr.ifr_name[IFNAMSIZ-1] = 0; |
| |
| colon = strchr(ifr.ifr_name, ':'); |
| if (colon) |
| *colon = 0; |
| |
| /* |
| * See which interface the caller is talking about. |
| */ |
| |
| switch (cmd) { |
| /* |
| * These ioctl calls: |
| * - can be done by all. |
| * - atomic and do not require locking. |
| * - return a value |
| */ |
| case SIOCGIFFLAGS: |
| case SIOCGIFMETRIC: |
| case SIOCGIFMTU: |
| case SIOCGIFHWADDR: |
| case SIOCGIFSLAVE: |
| case SIOCGIFMAP: |
| case SIOCGIFINDEX: |
| case SIOCGIFTXQLEN: |
| dev_load(net, ifr.ifr_name); |
| rcu_read_lock(); |
| ret = dev_ifsioc_locked(net, &ifr, cmd); |
| rcu_read_unlock(); |
| if (!ret) { |
| if (colon) |
| *colon = ':'; |
| if (copy_to_user(arg, &ifr, |
| sizeof(struct ifreq))) |
| ret = -EFAULT; |
| } |
| return ret; |
| |
| case SIOCETHTOOL: |
| dev_load(net, ifr.ifr_name); |
| rtnl_lock(); |
| ret = dev_ethtool(net, &ifr); |
| rtnl_unlock(); |
| if (!ret) { |
| if (colon) |
| *colon = ':'; |
| if (copy_to_user(arg, &ifr, |
| sizeof(struct ifreq))) |
| ret = -EFAULT; |
| } |
| return ret; |
| |
| /* |
| * These ioctl calls: |
| * - require superuser power. |
| * - require strict serialization. |
| * - return a value |
| */ |
| case SIOCGMIIPHY: |
| case SIOCGMIIREG: |
| case SIOCSIFNAME: |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| dev_load(net, ifr.ifr_name); |
| rtnl_lock(); |
| ret = dev_ifsioc(net, &ifr, cmd); |
| rtnl_unlock(); |
| if (!ret) { |
| if (colon) |
| *colon = ':'; |
| if (copy_to_user(arg, &ifr, |
| sizeof(struct ifreq))) |
| ret = -EFAULT; |
| } |
| return ret; |
| |
| /* |
| * These ioctl calls: |
| * - require superuser power. |
| * - require strict serialization. |
| * - do not return a value |
| */ |
| case SIOCSIFFLAGS: |
| case SIOCSIFMETRIC: |
| case SIOCSIFMTU: |
| case SIOCSIFMAP: |
| case SIOCSIFHWADDR: |
| case SIOCSIFSLAVE: |
| case SIOCADDMULTI: |
| case SIOCDELMULTI: |
| case SIOCSIFHWBROADCAST: |
| case SIOCSIFTXQLEN: |
| case SIOCSMIIREG: |
| case SIOCBONDENSLAVE: |
| case SIOCBONDRELEASE: |
| case SIOCBONDSETHWADDR: |
| case SIOCBONDCHANGEACTIVE: |
| case SIOCBRADDIF: |
| case SIOCBRDELIF: |
| case SIOCSHWTSTAMP: |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| /* fall through */ |
| case SIOCBONDSLAVEINFOQUERY: |
| case SIOCBONDINFOQUERY: |
| dev_load(net, ifr.ifr_name); |
| rtnl_lock(); |
| ret = dev_ifsioc(net, &ifr, cmd); |
| rtnl_unlock(); |
| return ret; |
| |
| case SIOCGIFMEM: |
| /* Get the per device memory space. We can add this but |
| * currently do not support it */ |
| case SIOCSIFMEM: |
| /* Set the per device memory buffer space. |
| * Not applicable in our case */ |
| case SIOCSIFLINK: |
| return -EINVAL; |
| |
| /* |
| * Unknown or private ioctl. |
| */ |
| default: |
| if (cmd == SIOCWANDEV || |
| (cmd >= SIOCDEVPRIVATE && |
| cmd <= SIOCDEVPRIVATE + 15)) { |
| dev_load(net, ifr.ifr_name); |
| rtnl_lock(); |
| ret = dev_ifsioc(net, &ifr, cmd); |
| rtnl_unlock(); |
| if (!ret && copy_to_user(arg, &ifr, |
| sizeof(struct ifreq))) |
| ret = -EFAULT; |
| return ret; |
| } |
| /* Take care of Wireless Extensions */ |
| if (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST) |
| return wext_handle_ioctl(net, &ifr, cmd, arg); |
| return -EINVAL; |
| } |
| } |
| |
| |
| /** |
| * dev_new_index - allocate an ifindex |
| * @net: the applicable net namespace |
| * |
| * Returns a suitable unique value for a new device interface |
| * number. The caller must hold the rtnl semaphore or the |
| * dev_base_lock to be sure it remains unique. |
| */ |
| static int dev_new_index(struct net *net) |
| { |
| static int ifindex; |
| for (;;) { |
| if (++ifindex <= 0) |
| ifindex = 1; |
| if (!__dev_get_by_index(net, ifindex)) |
| return ifindex; |
| } |
| } |
| |
| /* Delayed registration/unregisteration */ |
| static LIST_HEAD(net_todo_list); |
| |
| static void net_set_todo(struct net_device *dev) |
| { |
| list_add_tail(&dev->todo_list, &net_todo_list); |
| } |
| |
| static void rollback_registered_many(struct list_head *head) |
| { |
| struct net_device *dev, *tmp; |
| |
| BUG_ON(dev_boot_phase); |
| ASSERT_RTNL(); |
| |
| list_for_each_entry_safe(dev, tmp, head, unreg_list) { |
| /* Some devices call without registering |
| * for initialization unwind. Remove those |
| * devices and proceed with the remaining. |
| */ |
| if (dev->reg_state == NETREG_UNINITIALIZED) { |
| pr_debug("unregister_netdevice: device %s/%p never " |
| "was registered\n", dev->name, dev); |
| |
| WARN_ON(1); |
| list_del(&dev->unreg_list); |
| continue; |
| } |
| |
| BUG_ON(dev->reg_state != NETREG_REGISTERED); |
| |
| /* If device is running, close it first. */ |
| dev_close(dev); |
| |
| /* And unlink it from device chain. */ |
| unlist_netdevice(dev); |
| |
| dev->reg_state = NETREG_UNREGISTERING; |
| } |
| |
| synchronize_net(); |
| |
| list_for_each_entry(dev, head, unreg_list) { |
| /* Shutdown queueing discipline. */ |
| dev_shutdown(dev); |
| |
| |
| /* Notify protocols, that we are about to destroy |
| this device. They should clean all the things. |
| */ |
| call_netdevice_notifiers(NETDEV_UNREGISTER, dev); |
| |
| if (!dev->rtnl_link_ops || |
| dev->rtnl_link_state == RTNL_LINK_INITIALIZED) |
| rtmsg_ifinfo(RTM_DELLINK, dev, ~0U); |
| |
| /* |
| * Flush the unicast and multicast chains |
| */ |
| dev_uc_flush(dev); |
| dev_mc_flush(dev); |
| |
| if (dev->netdev_ops->ndo_uninit) |
| dev->netdev_ops->ndo_uninit(dev); |
| |
| /* Notifier chain MUST detach us from master device. */ |
| WARN_ON(dev->master); |
| |
| /* Remove entries from kobject tree */ |
| netdev_unregister_kobject(dev); |
| } |
| |
| /* Process any work delayed until the end of the batch */ |
| dev = list_first_entry(head, struct net_device, unreg_list); |
| call_netdevice_notifiers(NETDEV_UNREGISTER_BATCH, dev); |
| |
| synchronize_net(); |
| |
| list_for_each_entry(dev, head, unreg_list) |
| dev_put(dev); |
| } |
| |
| static void rollback_registered(struct net_device *dev) |
| { |
| LIST_HEAD(single); |
| |
| list_add(&dev->unreg_list, &single); |
| rollback_registered_many(&single); |
| } |
| |
| static void __netdev_init_queue_locks_one(struct net_device *dev, |
| struct netdev_queue *dev_queue, |
| void *_unused) |
| { |
| spin_lock_init(&dev_queue->_xmit_lock); |
| netdev_set_xmit_lockdep_class(&dev_queue->_xmit_lock, dev->type); |
| dev_queue->xmit_lock_owner = -1; |
| } |
| |
| static void netdev_init_queue_locks(struct net_device *dev) |
| { |
| netdev_for_each_tx_queue(dev, __netdev_init_queue_locks_one, NULL); |
| __netdev_init_queue_locks_one(dev, &dev->rx_queue, NULL); |
| } |
| |
| unsigned long netdev_fix_features(unsigned long features, const char *name) |
| { |
| /* Fix illegal SG+CSUM combinations. */ |
| if ((features & NETIF_F_SG) && |
| !(features & NETIF_F_ALL_CSUM)) { |
| if (name) |
| printk(KERN_NOTICE "%s: Dropping NETIF_F_SG since no " |
| "checksum feature.\n", name); |
| features &= ~NETIF_F_SG; |
| } |
| |
| /* TSO requires that SG is present as well. */ |
| if ((features & NETIF_F_TSO) && !(features & NETIF_F_SG)) { |
| if (name) |
| printk(KERN_NOTICE "%s: Dropping NETIF_F_TSO since no " |
| "SG feature.\n", name); |
| features &= ~NETIF_F_TSO; |
| } |
| |
| if (features & NETIF_F_UFO) { |
| if (!(features & NETIF_F_GEN_CSUM)) { |
| if (name) |
| printk(KERN_ERR "%s: Dropping NETIF_F_UFO " |
| "since no NETIF_F_HW_CSUM feature.\n", |
| name); |
| features &= ~NETIF_F_UFO; |
| } |
| |
| if (!(features & NETIF_F_SG)) { |
| if (name) |
| printk(KERN_ERR "%s: Dropping NETIF_F_UFO " |
| "since no NETIF_F_SG feature.\n", name); |
| features &= ~NETIF_F_UFO; |
| } |
| } |
| |
| return features; |
| } |
| EXPORT_SYMBOL(netdev_fix_features); |
| |
| /** |
| * netif_stacked_transfer_operstate - transfer operstate |
| * @rootdev: the root or lower level device to transfer state from |
| * @dev: the device to transfer operstate to |
| * |
| * Transfer operational state from root to device. This is normally |
| * called when a stacking relationship exists between the root |
| * device and the device(a leaf device). |
| */ |
| void netif_stacked_transfer_operstate(const struct net_device *rootdev, |
| struct net_device *dev) |
| { |
| if (rootdev->operstate == IF_OPER_DORMANT) |
| netif_dormant_on(dev); |
| else |
| netif_dormant_off(dev); |
| |
| if (netif_carrier_ok(rootdev)) { |
| if (!netif_carrier_ok(dev)) |
| netif_carrier_on(dev); |
| } else { |
| if (netif_carrier_ok(dev)) |
| netif_carrier_off(dev); |
| } |
| } |
| EXPORT_SYMBOL(netif_stacked_transfer_operstate); |
| |
| /** |
| * register_netdevice - register a network device |
| * @dev: device to register |
| * |
| * Take a completed network device structure and add it to the kernel |
| * interfaces. A %NETDEV_REGISTER message is sent to the netdev notifier |
| * chain. 0 is returned on success. A negative errno code is returned |
| * on a failure to set up the device, or if the name is a duplicate. |
| * |
| * Callers must hold the rtnl semaphore. You may want |
| * register_netdev() instead of this. |
| * |
| * BUGS: |
| * The locking appears insufficient to guarantee two parallel registers |
| * will not get the same name. |
| */ |
| |
| int register_netdevice(struct net_device *dev) |
| { |
| int ret; |
| struct net *net = dev_net(dev); |
| |
| BUG_ON(dev_boot_phase); |
| ASSERT_RTNL(); |
| |
| might_sleep(); |
| |
| /* When net_device's are persistent, this will be fatal. */ |
| BUG_ON(dev->reg_state != NETREG_UNINITIALIZED); |
| BUG_ON(!net); |
| |
| spin_lock_init(&dev->addr_list_lock); |
| netdev_set_addr_lockdep_class(dev); |
| netdev_init_queue_locks(dev); |
| |
| dev->iflink = -1; |
| |
| #ifdef CONFIG_RPS |
| if (!dev->num_rx_queues) { |
| /* |
| * Allocate a single RX queue if driver never called |
| * alloc_netdev_mq |
| */ |
| |
| dev->_rx = kzalloc(sizeof(struct netdev_rx_queue), GFP_KERNEL); |
| if (!dev->_rx) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| dev->_rx->first = dev->_rx; |
| atomic_set(&dev->_rx->count, 1); |
| dev->num_rx_queues = 1; |
| } |
| #endif |
| /* Init, if this function is available */ |
| if (dev->netdev_ops->ndo_init) { |
| ret = dev->netdev_ops->ndo_init(dev); |
| if (ret) { |
| if (ret > 0) |
| ret = -EIO; |
| goto out; |
| } |
| } |
| |
| ret = dev_get_valid_name(net, dev->name, dev->name, 0); |
| if (ret) |
| goto err_uninit; |
| |
| dev->ifindex = dev_new_index(net); |
| if (dev->iflink == -1) |
| dev->iflink = dev->ifindex; |
| |
| /* Fix illegal checksum combinations */ |
| if ((dev->features & NETIF_F_HW_CSUM) && |
| (dev->features & (NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM))) { |
| printk(KERN_NOTICE "%s: mixed HW and IP checksum settings.\n", |
| dev->name); |
| dev->features &= ~(NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM); |
| } |
| |
| if ((dev->features & NETIF_F_NO_CSUM) && |
| (dev->features & (NETIF_F_HW_CSUM|NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM))) { |
| printk(KERN_NOTICE "%s: mixed no checksumming and other settings.\n", |
| dev->name); |
| dev->features &= ~(NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM|NETIF_F_HW_CSUM); |
| } |
| |
| dev->features = netdev_fix_features(dev->features, dev->name); |
| |
| /* Enable software GSO if SG is supported. */ |
| if (dev->features & NETIF_F_SG) |
| dev->features |= NETIF_F_GSO; |
| |
| netdev_initialize_kobject(dev); |
| |
| ret = call_netdevice_notifiers(NETDEV_POST_INIT, dev); |
| ret = notifier_to_errno(ret); |
| if (ret) |
| goto err_uninit; |
| |
| ret = netdev_register_kobject(dev); |
| if (ret) |
| goto err_uninit; |
| dev->reg_state = NETREG_REGISTERED; |
| |
| /* |
| * Default initial state at registry is that the |
| * device is present. |
| */ |
| |
| set_bit(__LINK_STATE_PRESENT, &dev->state); |
| |
| dev_init_scheduler(dev); |
| dev_hold(dev); |
| list_netdevice(dev); |
| |
| /* Notify protocols, that a new device appeared. */ |
| ret = call_netdevice_notifiers(NETDEV_REGISTER, dev); |
| ret = notifier_to_errno(ret); |
| if (ret) { |
| rollback_registered(dev); |
| dev->reg_state = NETREG_UNREGISTERED; |
| } |
| /* |
| * Prevent userspace races by waiting until the network |
| * device is fully setup before sending notifications. |
| */ |
| if (!dev->rtnl_link_ops || |
| dev->rtnl_link_state == RTNL_LINK_INITIALIZED) |
| rtmsg_ifinfo(RTM_NEWLINK, dev, ~0U); |
| |
| out: |
| return ret; |
| |
| err_uninit: |
| if (dev->netdev_ops->ndo_uninit) |
| dev->netdev_ops->ndo_uninit(dev); |
| goto out; |
| } |
| EXPORT_SYMBOL(register_netdevice); |
| |
| /** |
| * init_dummy_netdev - init a dummy network device for NAPI |
| * @dev: device to init |
| * |
| * This takes a network device structure and initialize the minimum |
| * amount of fields so it can be used to schedule NAPI polls without |
| * registering a full blown interface. This is to be used by drivers |
| * that need to tie several hardware interfaces to a single NAPI |
| * poll scheduler due to HW limitations. |
| */ |
| int init_dummy_netdev(struct net_device *dev) |
| { |
| /* Clear everything. Note we don't initialize spinlocks |
| * are they aren't supposed to be taken by any of the |
| * NAPI code and this dummy netdev is supposed to be |
| * only ever used for NAPI polls |
| */ |
| memset(dev, 0, sizeof(struct net_device)); |
| |
| /* make sure we BUG if trying to hit standard |
| * register/unregister code path |
| */ |
| dev->reg_state = NETREG_DUMMY; |
| |
| /* initialize the ref count */ |
| atomic_set(&dev->refcnt, 1); |
| |
| /* NAPI wants this */ |
| INIT_LIST_HEAD(&dev->napi_list); |
| |
| /* a dummy interface is started by default */ |
| set_bit(__LINK_STATE_PRESENT, &dev->state); |
| set_bit(__LINK_STATE_START, &dev->state); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(init_dummy_netdev); |
| |
| |
| /** |
| * register_netdev - register a network device |
| * @dev: device to register |
| * |
| * Take a completed network device structure and add it to the kernel |
| * interfaces. A %NETDEV_REGISTER message is sent to the netdev notifier |
| * chain. 0 is returned on success. A negative errno code is returned |
| * on a failure to set up the device, or if the name is a duplicate. |
| * |
| * This is a wrapper around register_netdevice that takes the rtnl semaphore |
| * and expands the device name if you passed a format string to |
| * alloc_netdev. |
| */ |
| int register_netdev(struct net_device *dev) |
| { |
| int err; |
| |
| rtnl_lock(); |
| |
| /* |
| * If the name is a format string the caller wants us to do a |
| * name allocation. |
| */ |
| if (strchr(dev->name, '%')) { |
| err = dev_alloc_name(dev, dev->name); |
| if (err < 0) |
| goto out; |
| } |
| |
| err = register_netdevice(dev); |
| out: |
| rtnl_unlock(); |
| return err; |
| } |
| EXPORT_SYMBOL(register_netdev); |
| |
| /* |
| * netdev_wait_allrefs - wait until all references are gone. |
| * |
| * This is called when unregistering network devices. |
| * |
| * Any protocol or device that holds a reference should register |
| * for netdevice notification, and cleanup and put back the |
| * reference if they receive an UNREGISTER event. |
| * We can get stuck here if buggy protocols don't correctly |
| * call dev_put. |
| */ |
| static void netdev_wait_allrefs(struct net_device *dev) |
| { |
| unsigned long rebroadcast_time, warning_time; |
| |
| linkwatch_forget_dev(dev); |
| |
| rebroadcast_time = warning_time = jiffies; |
| while (atomic_read(&dev->refcnt) != 0) { |
| if (time_after(jiffies, rebroadcast_time + 1 * HZ)) { |
| rtnl_lock(); |
| |
| /* Rebroadcast unregister notification */ |
| call_netdevice_notifiers(NETDEV_UNREGISTER, dev); |
| /* don't resend NETDEV_UNREGISTER_BATCH, _BATCH users |
| * should have already handle it the first time */ |
| |
| if (test_bit(__LINK_STATE_LINKWATCH_PENDING, |
| &dev->state)) { |
| /* We must not have linkwatch events |
| * pending on unregister. If this |
| * happens, we simply run the queue |
| * unscheduled, resulting in a noop |
| * for this device. |
| */ |
| linkwatch_run_queue(); |
| } |
| |
| __rtnl_unlock(); |
| |
| rebroadcast_time = jiffies; |
| } |
| |
| msleep(250); |
| |
| if (time_after(jiffies, warning_time + 10 * HZ)) { |
| printk(KERN_EMERG "unregister_netdevice: " |
| "waiting for %s to become free. Usage " |
| "count = %d\n", |
| dev->name, atomic_read(&dev->refcnt)); |
| warning_time = jiffies; |
| } |
| } |
| } |
| |
| /* The sequence is: |
| * |
| * rtnl_lock(); |
| * ... |
| * register_netdevice(x1); |
| * register_netdevice(x2); |
| * ... |
| * unregister_netdevice(y1); |
| * unregister_netdevice(y2); |
| * ... |
| * rtnl_unlock(); |
| * free_netdev(y1); |
| * free_netdev(y2); |
| * |
| * We are invoked by rtnl_unlock(). |
| * This allows us to deal with problems: |
| * 1) We can delete sysfs objects which invoke hotplug |
| * without deadlocking with linkwatch via keventd. |
| * 2) Since we run with the RTNL semaphore not held, we can sleep |
| * safely in order to wait for the netdev refcnt to drop to zero. |
| * |
| * We must not return until all unregister events added during |
| * the interval the lock was held have been completed. |
| */ |
| void netdev_run_todo(void) |
| { |
| struct list_head list; |
| |
| /* Snapshot list, allow later requests */ |
| list_replace_init(&net_todo_list, &list); |
| |
| __rtnl_unlock(); |
| |
| while (!list_empty(&list)) { |
| struct net_device *dev |
| = list_first_entry(&list, struct net_device, todo_list); |
| list_del(&dev->todo_list); |
| |
| if (unlikely(dev->reg_state != NETREG_UNREGISTERING)) { |
| printk(KERN_ERR "network todo '%s' but state %d\n", |
| dev->name, dev->reg_state); |
| dump_stack(); |
| continue; |
| } |
| |
| dev->reg_state = NETREG_UNREGISTERED; |
| |
| on_each_cpu(flush_backlog, dev, 1); |
| |
| netdev_wait_allrefs(dev); |
| |
| /* paranoia */ |
| BUG_ON(atomic_read(&dev->refcnt)); |
| WARN_ON(dev->ip_ptr); |
| WARN_ON(dev->ip6_ptr); |
| WARN_ON(dev->dn_ptr); |
| |
| if (dev->destructor) |
| dev->destructor(dev); |
| |
| /* Free network device */ |
| kobject_put(&dev->dev.kobj); |
| } |
| } |
| |
| /** |
| * dev_txq_stats_fold - fold tx_queues stats |
| * @dev: device to get statistics from |
| * @stats: struct net_device_stats to hold results |
| */ |
| void dev_txq_stats_fold(const struct net_device *dev, |
| struct net_device_stats *stats) |
| { |
| unsigned long tx_bytes = 0, tx_packets = 0, tx_dropped = 0; |
| unsigned int i; |
| struct netdev_queue *txq; |
| |
| for (i = 0; i < dev->num_tx_queues; i++) { |
| txq = netdev_get_tx_queue(dev, i); |
| tx_bytes += txq->tx_bytes; |
| tx_packets += txq->tx_packets; |
| tx_dropped += txq->tx_dropped; |
| } |
| if (tx_bytes || tx_packets || tx_dropped) { |
| stats->tx_bytes = tx_bytes; |
| stats->tx_packets = tx_packets; |
| stats->tx_dropped = tx_dropped; |
| } |
| } |
| EXPORT_SYMBOL(dev_txq_stats_fold); |
| |
| /** |
| * dev_get_stats - get network device statistics |
| * @dev: device to get statistics from |
| * |
| * Get network statistics from device. The device driver may provide |
| * its own method by setting dev->netdev_ops->get_stats; otherwise |
| * the internal statistics structure is used. |
| */ |
| const struct net_device_stats *dev_get_stats(struct net_device *dev) |
| { |
| const struct net_device_ops *ops = dev->netdev_ops; |
| |
| if (ops->ndo_get_stats) |
| return ops->ndo_get_stats(dev); |
| |
| dev_txq_stats_fold(dev, &dev->stats); |
| return &dev->stats; |
| } |
| EXPORT_SYMBOL(dev_get_stats); |
| |
| static void netdev_init_one_queue(struct net_device *dev, |
| struct netdev_queue *queue, |
| void *_unused) |
| { |
| queue->dev = dev; |
| } |
| |
| static void netdev_init_queues(struct net_device *dev) |
| { |
| netdev_init_one_queue(dev, &dev->rx_queue, NULL); |
| netdev_for_each_tx_queue(dev, netdev_init_one_queue, NULL); |
| spin_lock_init(&dev->tx_global_lock); |
| } |
| |
| /** |
| * alloc_netdev_mq - allocate network device |
| * @sizeof_priv: size of private data to allocate space for |
| * @name: device name format string |
| * @setup: callback to initialize device |
| * @queue_count: the number of subqueues to allocate |
| * |
| * Allocates a struct net_device with private data area for driver use |
| * and performs basic initialization. Also allocates subquue structs |
| * for each queue on the device at the end of the netdevice. |
| */ |
| struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name, |
| void (*setup)(struct net_device *), unsigned int queue_count) |
| { |
| struct netdev_queue *tx; |
| struct net_device *dev; |
| size_t alloc_size; |
| struct net_device *p; |
| #ifdef CONFIG_RPS |
| struct netdev_rx_queue *rx; |
| int i; |
| #endif |
| |
| BUG_ON(strlen(name) >= sizeof(dev->name)); |
| |
| alloc_size = sizeof(struct net_device); |
| if (sizeof_priv) { |
| /* ensure 32-byte alignment of private area */ |
| alloc_size = ALIGN(alloc_size, NETDEV_ALIGN); |
| alloc_size += sizeof_priv; |
| } |
| /* ensure 32-byte alignment of whole construct */ |
| alloc_size += NETDEV_ALIGN - 1; |
| |
| p = kzalloc(alloc_size, GFP_KERNEL); |
| if (!p) { |
| printk(KERN_ERR "alloc_netdev: Unable to allocate device.\n"); |
| return NULL; |
| } |
| |
| tx = kcalloc(queue_count, sizeof(struct netdev_queue), GFP_KERNEL); |
| if (!tx) { |
| printk(KERN_ERR "alloc_netdev: Unable to allocate " |
| "tx qdiscs.\n"); |
| goto free_p; |
| } |
| |
| #ifdef CONFIG_RPS |
| rx = kcalloc(queue_count, sizeof(struct netdev_rx_queue), GFP_KERNEL); |
| if (!rx) { |
| printk(KERN_ERR "alloc_netdev: Unable to allocate " |
| "rx queues.\n"); |
| goto free_tx; |
| } |
| |
| atomic_set(&rx->count, queue_count); |
| |
| /* |
| * Set a pointer to first element in the array which holds the |
| * reference count. |
| */ |
| for (i = 0; i < queue_count; i++) |
| rx[i].first = rx; |
| #endif |
| |
| dev = PTR_ALIGN(p, NETDEV_ALIGN); |
| dev->padded = (char *)dev - (char *)p; |
| |
| if (dev_addr_init(dev)) |
| goto free_rx; |
| |
| dev_mc_init(dev); |
| dev_uc_init(dev); |
| |
| dev_net_set(dev, &init_net); |
| |
| dev->_tx = tx; |
| dev->num_tx_queues = queue_count; |
| dev->real_num_tx_queues = queue_count; |
| |
| #ifdef CONFIG_RPS |
| dev->_rx = rx; |
| dev->num_rx_queues = queue_count; |
| #endif |
| |
| dev->gso_max_size = GSO_MAX_SIZE; |
| |
| netdev_init_queues(dev); |
| |
| INIT_LIST_HEAD(&dev->ethtool_ntuple_list.list); |
| dev->ethtool_ntuple_list.count = 0; |
| INIT_LIST_HEAD(&dev->napi_list); |
| INIT_LIST_HEAD(&dev->unreg_list); |
| INIT_LIST_HEAD(&dev->link_watch_list); |
| dev->priv_flags = IFF_XMIT_DST_RELEASE; |
| setup(dev); |
| strcpy(dev->name, name); |
| return dev; |
| |
| free_rx: |
| #ifdef CONFIG_RPS |
| kfree(rx); |
| free_tx: |
| #endif |
| kfree(tx); |
| free_p: |
| kfree(p); |
| return NULL; |
| } |
| EXPORT_SYMBOL(alloc_netdev_mq); |
| |
| /** |
| * free_netdev - free network device |
| * @dev: device |
| * |
| * This function does the last stage of destroying an allocated device |
| * interface. The reference to the device object is released. |
| * If this is the last reference then it will be freed. |
| */ |
| void free_netdev(struct net_device *dev) |
| { |
| struct napi_struct *p, *n; |
| |
| release_net(dev_net(dev)); |
| |
| kfree(dev->_tx); |
| |
| /* Flush device addresses */ |
| dev_addr_flush(dev); |
| |
| /* Clear ethtool n-tuple list */ |
| ethtool_ntuple_flush(dev); |
| |
| list_for_each_entry_safe(p, n, &dev->napi_list, dev_list) |
| netif_napi_del(p); |
| |
| /* Compatibility with error handling in drivers */ |
| if (dev->reg_state == NETREG_UNINITIALIZED) { |
| kfree((char *)dev - dev->padded); |
| return; |
| } |
| |
| BUG_ON(dev->reg_state != NETREG_UNREGISTERED); |
| dev->reg_state = NETREG_RELEASED; |
| |
| /* will free via device release */ |
| put_device(&dev->dev); |
| } |
| EXPORT_SYMBOL(free_netdev); |
| |
| /** |
| * synchronize_net - Synchronize with packet receive processing |
| * |
| * Wait for packets currently being received to be done. |
| * Does not block later packets from starting. |
| */ |
| void synchronize_net(void) |
| { |
| might_sleep(); |
| synchronize_rcu(); |
| } |
| EXPORT_SYMBOL(synchronize_net); |
| |
| /** |
| * unregister_netdevice_queue - remove device from the kernel |
| * @dev: device |
| * @head: list |
| * |
| * This function shuts down a device interface and removes it |
| * from the kernel tables. |
| * If head not NULL, device is queued to be unregistered later. |
| * |
| * Callers must hold the rtnl semaphore. You may want |
| * unregister_netdev() instead of this. |
| */ |
| |
| void unregister_netdevice_queue(struct net_device *dev, struct list_head *head) |
| { |
| ASSERT_RTNL(); |
| |
| if (head) { |
| list_move_tail(&dev->unreg_list, head); |
| } else { |
| rollback_registered(dev); |
| /* Finish processing unregister after unlock */ |
| net_set_todo(dev); |
| } |
| } |
| EXPORT_SYMBOL(unregister_netdevice_queue); |
| |
| /** |
| * unregister_netdevice_many - unregister many devices |
| * @head: list of devices |
| */ |
| void unregister_netdevice_many(struct list_head *head) |
| { |
| struct net_device *dev; |
| |
| if (!list_empty(head)) { |
| rollback_registered_many(head); |
| list_for_each_entry(dev, head, unreg_list) |
| net_set_todo(dev); |
| } |
| } |
| EXPORT_SYMBOL(unregister_netdevice_many); |
| |
| /** |
| * unregister_netdev - remove device from the kernel |
| * @dev: device |
| * |
| * This function shuts down a device interface and removes it |
| * from the kernel tables. |
| * |
| * This is just a wrapper for unregister_netdevice that takes |
| * the rtnl semaphore. In general you want to use this and not |
| * unregister_netdevice. |
| */ |
| void unregister_netdev(struct net_device *dev) |
| { |
| rtnl_lock(); |
| unregister_netdevice(dev); |
| rtnl_unlock(); |
| } |
| EXPORT_SYMBOL(unregister_netdev); |
| |
| /** |
| * dev_change_net_namespace - move device to different nethost namespace |
| * @dev: device |
| * @net: network namespace |
| * @pat: If not NULL name pattern to try if the current device name |
| * is already taken in the destination network namespace. |
| * |
| * This function shuts down a device interface and moves it |
| * to a new network namespace. On success 0 is returned, on |
| * a failure a netagive errno code is returned. |
| * |
| * Callers must hold the rtnl semaphore. |
| */ |
| |
| int dev_change_net_namespace(struct net_device *dev, struct net *net, const char *pat) |
| { |
| int err; |
| |
| ASSERT_RTNL(); |
| |
| /* Don't allow namespace local devices to be moved. */ |
| err = -EINVAL; |
| if (dev->features & NETIF_F_NETNS_LOCAL) |
| goto out; |
| |
| #ifdef CONFIG_SYSFS |
| /* Don't allow real devices to be moved when sysfs |
| * is enabled. |
| */ |
| err = -EINVAL; |
| if (dev->dev.parent) |
| goto out; |
| #endif |
| |
| /* Ensure the device has been registrered */ |
| err = -EINVAL; |
| if (dev->reg_state != NETREG_REGISTERED) |
| goto out; |
| |
| /* Get out if there is nothing todo */ |
| err = 0; |
| if (net_eq(dev_net(dev), net)) |
| goto out; |
| |
| /* Pick the destination device name, and ensure |
| * we can use it in the destination network namespace. |
| */ |
| err = -EEXIST; |
| if (__dev_get_by_name(net, dev->name)) { |
| /* We get here if we can't use the current device name */ |
| if (!pat) |
| goto out; |
| if (dev_get_valid_name(net, pat, dev->name, 1)) |
| goto out; |
| } |
| |
| /* |
| * And now a mini version of register_netdevice unregister_netdevice. |
| */ |
| |
| /* If device is running close it first. */ |
| dev_close(dev); |
| |
| /* And unlink it from device chain */ |
| err = -ENODEV; |
| unlist_netdevice(dev); |
| |
| synchronize_net(); |
| |
| /* Shutdown queueing discipline. */ |
| dev_shutdown(dev); |
| |
| /* Notify protocols, that we are about to destroy |
| this device. They should clean all the things. |
| */ |
| call_netdevice_notifiers(NETDEV_UNREGISTER, dev); |
| call_netdevice_notifiers(NETDEV_UNREGISTER_BATCH, dev); |
| |
| /* |
| * Flush the unicast and multicast chains |
| */ |
| dev_uc_flush(dev); |
| dev_mc_flush(dev); |
| |
| netdev_unregister_kobject(dev); |
| |
| /* Actually switch the network namespace */ |
| dev_net_set(dev, net); |
| |
| /* If there is an ifindex conflict assign a new one */ |
| if (__dev_get_by_index(net, dev->ifindex)) { |
| int iflink = (dev->iflink == dev->ifindex); |
| dev->ifindex = dev_new_index(net); |
| if (iflink) |
| dev->iflink = dev->ifindex; |
| } |
| |
| /* Fixup kobjects */ |
| err = netdev_register_kobject(dev); |
| WARN_ON(err); |
| |
| /* Add the device back in the hashes */ |
| list_netdevice(dev); |
| |
| /* Notify protocols, that a new device appeared. */ |
| call_netdevice_notifiers(NETDEV_REGISTER, dev); |
| |
| /* |
| * Prevent userspace races by waiting until the network |
| * device is fully setup before sending notifications. |
| */ |
| rtmsg_ifinfo(RTM_NEWLINK, dev, ~0U); |
| |
| synchronize_net(); |
| err = 0; |
| out: |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(dev_change_net_namespace); |
| |
| static int dev_cpu_callback(struct notifier_block *nfb, |
| unsigned long action, |
| void *ocpu) |
| { |
| struct sk_buff **list_skb; |
| struct Qdisc **list_net; |
| struct sk_buff *skb; |
| unsigned int cpu, oldcpu = (unsigned long)ocpu; |
| struct softnet_data *sd, *oldsd; |
| |
| if (action != CPU_DEAD && action != CPU_DEAD_FROZEN) |
| return NOTIFY_OK; |
| |
| local_irq_disable(); |
| cpu = smp_processor_id(); |
| sd = &per_cpu(softnet_data, cpu); |
| oldsd = &per_cpu(softnet_data, oldcpu); |
| |
| /* Find end of our completion_queue. */ |
| list_skb = &sd->completion_queue; |
| while (*list_skb) |
| list_skb = &(*list_skb)->next; |
| /* Append completion queue from offline CPU. */ |
| *list_skb = oldsd->completion_queue; |
| oldsd->completion_queue = NULL; |
| |
| /* Find end of our output_queue. */ |
| list_net = &sd->output_queue; |
| while (*list_net) |
| list_net = &(*list_net)->next_sched; |
| /* Append output queue from offline CPU. */ |
| *list_net = oldsd->output_queue; |
| oldsd->output_queue = NULL; |
| |
| raise_softirq_irqoff(NET_TX_SOFTIRQ); |
| local_irq_enable(); |
| |
| /* Process offline CPU's input_pkt_queue */ |
| while ((skb = __skb_dequeue(&oldsd->input_pkt_queue))) { |
| netif_rx(skb); |
| incr_input_queue_head(oldsd); |
| } |
| |
| return NOTIFY_OK; |
| } |
| |
| |
| /** |
| * netdev_increment_features - increment feature set by one |
| * @all: current feature set |
| * @one: new feature set |
| * @mask: mask feature set |
| * |
| * Computes a new feature set after adding a device with feature set |
| * @one to the master device with current feature set @all. Will not |
| * enable anything that is off in @mask. Returns the new feature set. |
| */ |
| unsigned long netdev_increment_features(unsigned long all, unsigned long one, |
| unsigned long mask) |
| { |
| /* If device needs checksumming, downgrade to it. */ |
| if (all & NETIF_F_NO_CSUM && !(one & NETIF_F_NO_CSUM)) |
| all ^= NETIF_F_NO_CSUM | (one & NETIF_F_ALL_CSUM); |
| else if (mask & NETIF_F_ALL_CSUM) { |
| /* If one device supports v4/v6 checksumming, set for all. */ |
| if (one & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM) && |
| !(all & NETIF_F_GEN_CSUM)) { |
| all &= ~NETIF_F_ALL_CSUM; |
| all |= one & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM); |
| } |
| |
| /* If one device supports hw checksumming, set for all. */ |
| if (one & NETIF_F_GEN_CSUM && !(all & NETIF_F_GEN_CSUM)) { |
| all &= ~NETIF_F_ALL_CSUM; |
| all |= NETIF_F_HW_CSUM; |
| } |
| } |
| |
| one |= NETIF_F_ALL_CSUM; |
| |
| one |= all & NETIF_F_ONE_FOR_ALL; |
| all &= one | NETIF_F_LLTX | NETIF_F_GSO | NETIF_F_UFO; |
| all |= one & mask & NETIF_F_ONE_FOR_ALL; |
| |
| return all; |
| } |
| EXPORT_SYMBOL(netdev_increment_features); |
| |
| static struct hlist_head *netdev_create_hash(void) |
| { |
| int i; |
| struct hlist_head *hash; |
| |
| hash = kmalloc(sizeof(*hash) * NETDEV_HASHENTRIES, GFP_KERNEL); |
| if (hash != NULL) |
| for (i = 0; i < NETDEV_HASHENTRIES; i++) |
| INIT_HLIST_HEAD(&hash[i]); |
| |
| return hash; |
| } |
| |
| /* Initialize per network namespace state */ |
| static int __net_init netdev_init(struct net *net) |
| { |
| INIT_LIST_HEAD(&net->dev_base_head); |
| |
| net->dev_name_head = netdev_create_hash(); |
| if (net->dev_name_head == NULL) |
| goto err_name; |
| |
| net->dev_index_head = netdev_create_hash(); |
| if (net->dev_index_head == NULL) |
| goto err_idx; |
| |
| return 0; |
| |
| err_idx: |
| kfree(net->dev_name_head); |
| err_name: |
| return -ENOMEM; |
| } |
| |
| /** |
| * netdev_drivername - network driver for the device |
| * @dev: network device |
| * @buffer: buffer for resulting name |
| * @len: size of buffer |
| * |
| * Determine network driver for device. |
| */ |
| char *netdev_drivername(const struct net_device *dev, char *buffer, int len) |
| { |
| const struct device_driver *driver; |
| const struct device *parent; |
| |
| if (len <= 0 || !buffer) |
| return buffer; |
| buffer[0] = 0; |
| |
| parent = dev->dev.parent; |
| |
| if (!parent) |
| return buffer; |
| |
| driver = parent->driver; |
| if (driver && driver->name) |
| strlcpy(buffer, driver->name, len); |
| return buffer; |
| } |
| |
| static void __net_exit netdev_exit(struct net *net) |
| { |
| kfree(net->dev_name_head); |
| kfree(net->dev_index_head); |
| } |
| |
| static struct pernet_operations __net_initdata netdev_net_ops = { |
| .init = netdev_init, |
| .exit = netdev_exit, |
| }; |
| |
| static void __net_exit default_device_exit(struct net *net) |
| { |
| struct net_device *dev, *aux; |
| /* |
| * Push all migratable network devices back to the |
| * initial network namespace |
| */ |
| rtnl_lock(); |
| for_each_netdev_safe(net, dev, aux) { |
| int err; |
| char fb_name[IFNAMSIZ]; |
| |
| /* Ignore unmoveable devices (i.e. loopback) */ |
| if (dev->features & NETIF_F_NETNS_LOCAL) |
| continue; |
| |
| /* Leave virtual devices for the generic cleanup */ |
| if (dev->rtnl_link_ops) |
| continue; |
| |
| /* Push remaing network devices to init_net */ |
| snprintf(fb_name, IFNAMSIZ, "dev%d", dev->ifindex); |
| err = dev_change_net_namespace(dev, &init_net, fb_name); |
| if (err) { |
| printk(KERN_EMERG "%s: failed to move %s to init_net: %d\n", |
| __func__, dev->name, err); |
| BUG(); |
| } |
| } |
| rtnl_unlock(); |
| } |
| |
| static void __net_exit default_device_exit_batch(struct list_head *net_list) |
| { |
| /* At exit all network devices most be removed from a network |
| * namespace. Do this in the reverse order of registeration. |
| * Do this across as many network namespaces as possible to |
| * improve batching efficiency. |
| */ |
| struct net_device *dev; |
| struct net *net; |
| LIST_HEAD(dev_kill_list); |
| |
| rtnl_lock(); |
| list_for_each_entry(net, net_list, exit_list) { |
| for_each_netdev_reverse(net, dev) { |
| if (dev->rtnl_link_ops) |
| dev->rtnl_link_ops->dellink(dev, &dev_kill_list); |
| else |
| unregister_netdevice_queue(dev, &dev_kill_list); |
| } |
| } |
| unregister_netdevice_many(&dev_kill_list); |
| rtnl_unlock(); |
| } |
| |
| static struct pernet_operations __net_initdata default_device_ops = { |
| .exit = default_device_exit, |
| .exit_batch = default_device_exit_batch, |
| }; |
| |
| /* |
| * Initialize the DEV module. At boot time this walks the device list and |
| * unhooks any devices that fail to initialise (normally hardware not |
| * present) and leaves us with a valid list of present and active devices. |
| * |
| */ |
| |
| /* |
| * This is called single threaded during boot, so no need |
| * to take the rtnl semaphore. |
| */ |
| static int __init net_dev_init(void) |
| { |
| int i, rc = -ENOMEM; |
| |
| BUG_ON(!dev_boot_phase); |
| |
| if (dev_proc_init()) |
| goto out; |
| |
| if (netdev_kobject_init()) |
| goto out; |
| |
| INIT_LIST_HEAD(&ptype_all); |
| for (i = 0; i < PTYPE_HASH_SIZE; i++) |
| INIT_LIST_HEAD(&ptype_base[i]); |
| |
| if (register_pernet_subsys(&netdev_net_ops)) |
| goto out; |
| |
| /* |
| * Initialise the packet receive queues. |
| */ |
| |
| for_each_possible_cpu(i) { |
| struct softnet_data *queue; |
| |
| queue = &per_cpu(softnet_data, i); |
| skb_queue_head_init(&queue->input_pkt_queue); |
| queue->completion_queue = NULL; |
| INIT_LIST_HEAD(&queue->poll_list); |
| |
| #ifdef CONFIG_RPS |
| queue->csd.func = trigger_softirq; |
| queue->csd.info = queue; |
| queue->csd.flags = 0; |
| #endif |
| |
| queue->backlog.poll = process_backlog; |
| queue->backlog.weight = weight_p; |
| queue->backlog.gro_list = NULL; |
| queue->backlog.gro_count = 0; |
| } |
| |
| dev_boot_phase = 0; |
| |
| /* The loopback device is special if any other network devices |
| * is present in a network namespace the loopback device must |
| * be present. Since we now dynamically allocate and free the |
| * loopback device ensure this invariant is maintained by |
| * keeping the loopback device as the first device on the |
| * list of network devices. Ensuring the loopback devices |
| * is the first device that appears and the last network device |
| * that disappears. |
| */ |
| if (register_pernet_device(&loopback_net_ops)) |
| goto out; |
| |
| if (register_pernet_device(&default_device_ops)) |
| goto out; |
| |
| open_softirq(NET_TX_SOFTIRQ, net_tx_action); |
| open_softirq(NET_RX_SOFTIRQ, net_rx_action); |
| |
| hotcpu_notifier(dev_cpu_callback, 0); |
| dst_init(); |
| dev_mcast_init(); |
| rc = 0; |
| out: |
| return rc; |
| } |
| |
| subsys_initcall(net_dev_init); |
| |
| static int __init initialize_hashrnd(void) |
| { |
| get_random_bytes(&hashrnd, sizeof(hashrnd)); |
| return 0; |
| } |
| |
| late_initcall_sync(initialize_hashrnd); |
| |