diff --git a/drivers/ieee802154/fakehard.c b/drivers/ieee802154/fakehard.c
index 0384144..9ec07e8 100644
--- a/drivers/ieee802154/fakehard.c
+++ b/drivers/ieee802154/fakehard.c
@@ -31,6 +31,12 @@
 #include <net/ieee802154/mac_def.h>
 #include <net/ieee802154/nl802154.h>
 
+/**
+ * fake_get_pan_id - Retrieve the PAN ID of the device.
+ * @dev: The network device to retrieve the PAN of.
+ *
+ * Return the ID of the PAN from the PIB.
+ */
 static u16 fake_get_pan_id(struct net_device *dev)
 {
 	BUG_ON(dev->type != ARPHRD_IEEE802154);
@@ -38,6 +44,14 @@
 	return 0xeba1;
 }
 
+/**
+ * fake_get_short_addr - Retrieve the short address of the device.
+ * @dev: The network device to retrieve the short address of.
+ *
+ * Returns the IEEE 802.15.4 short-form address cached for this
+ * device. If the device has not yet had a short address assigned
+ * then this should return 0xFFFF to indicate a lack of association.
+ */
 static u16 fake_get_short_addr(struct net_device *dev)
 {
 	BUG_ON(dev->type != ARPHRD_IEEE802154);
@@ -45,6 +59,19 @@
 	return 0x1;
 }
 
+/**
+ * fake_get_dsn - Retrieve the DSN of the device.
+ * @dev: The network device to retrieve the DSN for.
+ *
+ * Returns the IEEE 802.15.4 DSN for the network device.
+ * The DSN is the sequence number which will be added to each
+ * packet or MAC command frame by the MAC during transmission.
+ *
+ * DSN means 'Data Sequence Number'.
+ *
+ * Note: This is in section 7.2.1.2 of the IEEE 802.15.4-2006
+ *       document.
+ */
 static u8 fake_get_dsn(struct net_device *dev)
 {
 	BUG_ON(dev->type != ARPHRD_IEEE802154);
@@ -52,6 +79,19 @@
 	return 0x00; /* DSN are implemented in HW, so return just 0 */
 }
 
+/**
+ * fake_get_bsn - Retrieve the BSN of the device.
+ * @dev: The network device to retrieve the BSN for.
+ *
+ * Returns the IEEE 802.15.4 BSN for the network device.
+ * The BSN is the sequence number which will be added to each
+ * beacon frame sent by the MAC.
+ *
+ * BSN means 'Beacon Sequence Number'.
+ *
+ * Note: This is in section 7.2.1.2 of the IEEE 802.15.4-2006
+ *       document.
+ */
 static u8 fake_get_bsn(struct net_device *dev)
 {
 	BUG_ON(dev->type != ARPHRD_IEEE802154);
@@ -59,6 +99,19 @@
 	return 0x00; /* BSN are implemented in HW, so return just 0 */
 }
 
+/**
+ * fake_assoc_req - Make an association request to the HW.
+ * @dev: The network device which we are associating to a network.
+ * @addr: The coordinator with which we wish to associate.
+ * @channel: The channel on which to associate.
+ * @cap: The capability information field to use in the association.
+ *
+ * Start an association with a coordinator. The coordinator's address
+ * and PAN ID can be found in @addr.
+ *
+ * Note: This is in section 7.3.1 and 7.5.3.1 of the IEEE
+ *       802.15.4-2006 document.
+ */
 static int fake_assoc_req(struct net_device *dev,
 		struct ieee802154_addr *addr, u8 channel, u8 cap)
 {
@@ -67,18 +120,70 @@
 			IEEE802154_SUCCESS);
 }
 
+/**
+ * fake_assoc_resp - Send an association response to a device.
+ * @dev: The network device on which to send the response.
+ * @addr: The address of the device to respond to.
+ * @short_addr: The assigned short address for the device (if any).
+ * @status: The result of the association request.
+ *
+ * Queue the association response of the coordinator to another
+ * device's attempt to associate with the network which we
+ * coordinate. This is then added to the indirect-send queue to be
+ * transmitted to the end device when it polls for data.
+ *
+ * Note: This is in section 7.3.2 and 7.5.3.1 of the IEEE
+ *       802.15.4-2006 document.
+ */
 static int fake_assoc_resp(struct net_device *dev,
 		struct ieee802154_addr *addr, u16 short_addr, u8 status)
 {
 	return 0;
 }
 
+/**
+ * fake_disassoc_req - Disassociate a device from a network.
+ * @dev: The network device on which we're disassociating a device.
+ * @addr: The device to disassociate from the network.
+ * @reason: The reason to give to the device for being disassociated.
+ *
+ * This sends a disassociation notification to the device being
+ * disassociated from the network.
+ *
+ * Note: This is in section 7.5.3.2 of the IEEE 802.15.4-2006
+ *       document, with the reason described in 7.3.3.2.
+ */
 static int fake_disassoc_req(struct net_device *dev,
 		struct ieee802154_addr *addr, u8 reason)
 {
 	return ieee802154_nl_disassoc_confirm(dev, IEEE802154_SUCCESS);
 }
 
+/**
+ * fake_start_req - Start an IEEE 802.15.4 PAN.
+ * @dev: The network device on which to start the PAN.
+ * @addr: The coordinator address to use when starting the PAN.
+ * @channel: The channel on which to start the PAN.
+ * @bcn_ord: Beacon order.
+ * @sf_ord: Superframe order.
+ * @pan_coord: Whether or not we are the PAN coordinator or just
+ *             requesting a realignment perhaps?
+ * @blx: Battery Life Extension feature bitfield.
+ * @coord_realign: Something to realign something else.
+ *
+ * If pan_coord is non-zero then this starts a network with the
+ * provided parameters, otherwise it attempts a coordinator
+ * realignment of the stated network instead.
+ *
+ * Note: This is in section 7.5.2.3 of the IEEE 802.15.4-2006
+ * document, with 7.3.8 describing coordinator realignment.
+ *
+ * Note: There is currently no way to notify the coordinator userland
+ * program of whether or not the PAN has started successfully. As
+ * such, the coordinator program cannot know when the MAC has
+ * completed starting the network and will simply have to assume
+ * completeness based on some form of time delay.
+ */
 static int fake_start_req(struct net_device *dev, struct ieee802154_addr *addr,
 				u8 channel,
 				u8 bcn_ord, u8 sf_ord, u8 pan_coord, u8 blx,
@@ -87,6 +192,21 @@
 	return 0;
 }
 
+/**
+ * fake_scan_req - Start a channel scan.
+ * @dev: The network device on which to perform a channel scan.
+ * @type: The type of scan to perform.
+ * @channels: The channel bitmask to scan.
+ * @duration: How long to spend on each channel.
+ *
+ * This starts either a passive (energy) scan or an active (PAN) scan
+ * on the channels indicated in the @channels bitmask. The duration of
+ * the scan is measured in terms of superframe duration. Specifically,
+ * the scan will spend aBaseSuperFrameDuration * ((2^n) + 1) on each
+ * channel.
+ *
+ * Note: This is in section 7.5.2.1 of the IEEE 802.15.4-2006 document.
+ */
 static int fake_scan_req(struct net_device *dev, u8 type, u32 channels,
 		u8 duration)
 {