| /* |
| * Copyright 2013 Maxime Ripard |
| * |
| * Maxime Ripard <maxime.ripard@free-electrons.com> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public |
| * License along with this file; if not, write to the Free |
| * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| /include/ "skeleton.dtsi" |
| |
| / { |
| interrupt-parent = <&gic>; |
| |
| aliases { |
| ethernet0 = &gmac; |
| }; |
| |
| chosen { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| framebuffer@0 { |
| compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; |
| allwinner,pipeline = "de_be0-lcd0-hdmi"; |
| clocks = <&pll6 0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| cpus { |
| enable-method = "allwinner,sun6i-a31"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <0>; |
| }; |
| |
| cpu@1 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <1>; |
| }; |
| |
| cpu@2 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <2>; |
| }; |
| |
| cpu@3 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <3>; |
| }; |
| }; |
| |
| memory { |
| reg = <0x40000000 0x80000000>; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu"; |
| interrupts = <0 120 4>, |
| <0 121 4>, |
| <0 122 4>, |
| <0 123 4>; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| osc24M: osc24M { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| }; |
| |
| osc32k: clk@0 { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <32768>; |
| clock-output-names = "osc32k"; |
| }; |
| |
| pll1: clk@01c20000 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun6i-a31-pll1-clk"; |
| reg = <0x01c20000 0x4>; |
| clocks = <&osc24M>; |
| clock-output-names = "pll1"; |
| }; |
| |
| pll6: clk@01c20028 { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun6i-a31-pll6-clk"; |
| reg = <0x01c20028 0x4>; |
| clocks = <&osc24M>; |
| clock-output-names = "pll6", "pll6x2"; |
| }; |
| |
| cpu: cpu@01c20050 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-cpu-clk"; |
| reg = <0x01c20050 0x4>; |
| |
| /* |
| * PLL1 is listed twice here. |
| * While it looks suspicious, it's actually documented |
| * that way both in the datasheet and in the code from |
| * Allwinner. |
| */ |
| clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; |
| clock-output-names = "cpu"; |
| }; |
| |
| axi: axi@01c20050 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-axi-clk"; |
| reg = <0x01c20050 0x4>; |
| clocks = <&cpu>; |
| clock-output-names = "axi"; |
| }; |
| |
| ahb1_mux: ahb1_mux@01c20054 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun6i-a31-ahb1-mux-clk"; |
| reg = <0x01c20054 0x4>; |
| clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; |
| clock-output-names = "ahb1_mux"; |
| }; |
| |
| ahb1: ahb1@01c20054 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-ahb-clk"; |
| reg = <0x01c20054 0x4>; |
| clocks = <&ahb1_mux>; |
| clock-output-names = "ahb1"; |
| }; |
| |
| ahb1_gates: clk@01c20060 { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun6i-a31-ahb1-gates-clk"; |
| reg = <0x01c20060 0x8>; |
| clocks = <&ahb1>; |
| clock-output-names = "ahb1_mipidsi", "ahb1_ss", |
| "ahb1_dma", "ahb1_mmc0", "ahb1_mmc1", |
| "ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1", |
| "ahb1_nand0", "ahb1_sdram", |
| "ahb1_gmac", "ahb1_ts", "ahb1_hstimer", |
| "ahb1_spi0", "ahb1_spi1", "ahb1_spi2", |
| "ahb1_spi3", "ahb1_otg", "ahb1_ehci0", |
| "ahb1_ehci1", "ahb1_ohci0", |
| "ahb1_ohci1", "ahb1_ohci2", "ahb1_ve", |
| "ahb1_lcd0", "ahb1_lcd1", "ahb1_csi", |
| "ahb1_hdmi", "ahb1_de0", "ahb1_de1", |
| "ahb1_fe0", "ahb1_fe1", "ahb1_mp", |
| "ahb1_gpu", "ahb1_deu0", "ahb1_deu1", |
| "ahb1_drc0", "ahb1_drc1"; |
| }; |
| |
| apb1: apb1@01c20054 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-apb0-clk"; |
| reg = <0x01c20054 0x4>; |
| clocks = <&ahb1>; |
| clock-output-names = "apb1"; |
| }; |
| |
| apb1_gates: clk@01c20068 { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun6i-a31-apb1-gates-clk"; |
| reg = <0x01c20068 0x4>; |
| clocks = <&apb1>; |
| clock-output-names = "apb1_codec", "apb1_digital_mic", |
| "apb1_pio", "apb1_daudio0", |
| "apb1_daudio1"; |
| }; |
| |
| apb2: clk@01c20058 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-apb1-clk"; |
| reg = <0x01c20058 0x4>; |
| clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; |
| clock-output-names = "apb2"; |
| }; |
| |
| apb2_gates: clk@01c2006c { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun6i-a31-apb2-gates-clk"; |
| reg = <0x01c2006c 0x4>; |
| clocks = <&apb2>; |
| clock-output-names = "apb2_i2c0", "apb2_i2c1", |
| "apb2_i2c2", "apb2_i2c3", "apb2_uart0", |
| "apb2_uart1", "apb2_uart2", "apb2_uart3", |
| "apb2_uart4", "apb2_uart5"; |
| }; |
| |
| mmc0_clk: clk@01c20088 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-mod0-clk"; |
| reg = <0x01c20088 0x4>; |
| clocks = <&osc24M>, <&pll6 0>; |
| clock-output-names = "mmc0"; |
| }; |
| |
| mmc1_clk: clk@01c2008c { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-mod0-clk"; |
| reg = <0x01c2008c 0x4>; |
| clocks = <&osc24M>, <&pll6 0>; |
| clock-output-names = "mmc1"; |
| }; |
| |
| mmc2_clk: clk@01c20090 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-mod0-clk"; |
| reg = <0x01c20090 0x4>; |
| clocks = <&osc24M>, <&pll6 0>; |
| clock-output-names = "mmc2"; |
| }; |
| |
| mmc3_clk: clk@01c20094 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-mod0-clk"; |
| reg = <0x01c20094 0x4>; |
| clocks = <&osc24M>, <&pll6 0>; |
| clock-output-names = "mmc3"; |
| }; |
| |
| spi0_clk: clk@01c200a0 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-mod0-clk"; |
| reg = <0x01c200a0 0x4>; |
| clocks = <&osc24M>, <&pll6 0>; |
| clock-output-names = "spi0"; |
| }; |
| |
| spi1_clk: clk@01c200a4 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-mod0-clk"; |
| reg = <0x01c200a4 0x4>; |
| clocks = <&osc24M>, <&pll6 0>; |
| clock-output-names = "spi1"; |
| }; |
| |
| spi2_clk: clk@01c200a8 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-mod0-clk"; |
| reg = <0x01c200a8 0x4>; |
| clocks = <&osc24M>, <&pll6 0>; |
| clock-output-names = "spi2"; |
| }; |
| |
| spi3_clk: clk@01c200ac { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-mod0-clk"; |
| reg = <0x01c200ac 0x4>; |
| clocks = <&osc24M>, <&pll6 0>; |
| clock-output-names = "spi3"; |
| }; |
| |
| usb_clk: clk@01c200cc { |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| compatible = "allwinner,sun6i-a31-usb-clk"; |
| reg = <0x01c200cc 0x4>; |
| clocks = <&osc24M>; |
| clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2", |
| "usb_ohci0", "usb_ohci1", |
| "usb_ohci2"; |
| }; |
| |
| /* |
| * The following two are dummy clocks, placeholders used in the gmac_tx |
| * clock. The gmac driver will choose one parent depending on the PHY |
| * interface mode, using clk_set_rate auto-reparenting. |
| * The actual TX clock rate is not controlled by the gmac_tx clock. |
| */ |
| mii_phy_tx_clk: clk@1 { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <25000000>; |
| clock-output-names = "mii_phy_tx"; |
| }; |
| |
| gmac_int_tx_clk: clk@2 { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <125000000>; |
| clock-output-names = "gmac_int_tx"; |
| }; |
| |
| gmac_tx_clk: clk@01c200d0 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun7i-a20-gmac-clk"; |
| reg = <0x01c200d0 0x4>; |
| clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; |
| clock-output-names = "gmac_tx"; |
| }; |
| }; |
| |
| soc@01c00000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| dma: dma-controller@01c02000 { |
| compatible = "allwinner,sun6i-a31-dma"; |
| reg = <0x01c02000 0x1000>; |
| interrupts = <0 50 4>; |
| clocks = <&ahb1_gates 6>; |
| resets = <&ahb1_rst 6>; |
| #dma-cells = <1>; |
| |
| /* DMA controller requires AHB1 clocked from PLL6 */ |
| assigned-clocks = <&ahb1_mux>; |
| assigned-clock-parents = <&pll6 0>; |
| }; |
| |
| mmc0: mmc@01c0f000 { |
| compatible = "allwinner,sun5i-a13-mmc"; |
| reg = <0x01c0f000 0x1000>; |
| clocks = <&ahb1_gates 8>, <&mmc0_clk>; |
| clock-names = "ahb", "mmc"; |
| resets = <&ahb1_rst 8>; |
| reset-names = "ahb"; |
| interrupts = <0 60 4>; |
| status = "disabled"; |
| }; |
| |
| mmc1: mmc@01c10000 { |
| compatible = "allwinner,sun5i-a13-mmc"; |
| reg = <0x01c10000 0x1000>; |
| clocks = <&ahb1_gates 9>, <&mmc1_clk>; |
| clock-names = "ahb", "mmc"; |
| resets = <&ahb1_rst 9>; |
| reset-names = "ahb"; |
| interrupts = <0 61 4>; |
| status = "disabled"; |
| }; |
| |
| mmc2: mmc@01c11000 { |
| compatible = "allwinner,sun5i-a13-mmc"; |
| reg = <0x01c11000 0x1000>; |
| clocks = <&ahb1_gates 10>, <&mmc2_clk>; |
| clock-names = "ahb", "mmc"; |
| resets = <&ahb1_rst 10>; |
| reset-names = "ahb"; |
| interrupts = <0 62 4>; |
| status = "disabled"; |
| }; |
| |
| mmc3: mmc@01c12000 { |
| compatible = "allwinner,sun5i-a13-mmc"; |
| reg = <0x01c12000 0x1000>; |
| clocks = <&ahb1_gates 11>, <&mmc3_clk>; |
| clock-names = "ahb", "mmc"; |
| resets = <&ahb1_rst 11>; |
| reset-names = "ahb"; |
| interrupts = <0 63 4>; |
| status = "disabled"; |
| }; |
| |
| usbphy: phy@01c19400 { |
| compatible = "allwinner,sun6i-a31-usb-phy"; |
| reg = <0x01c19400 0x10>, |
| <0x01c1a800 0x4>, |
| <0x01c1b800 0x4>; |
| reg-names = "phy_ctrl", |
| "pmu1", |
| "pmu2"; |
| clocks = <&usb_clk 8>, |
| <&usb_clk 9>, |
| <&usb_clk 10>; |
| clock-names = "usb0_phy", |
| "usb1_phy", |
| "usb2_phy"; |
| resets = <&usb_clk 0>, |
| <&usb_clk 1>, |
| <&usb_clk 2>; |
| reset-names = "usb0_reset", |
| "usb1_reset", |
| "usb2_reset"; |
| status = "disabled"; |
| #phy-cells = <1>; |
| }; |
| |
| ehci0: usb@01c1a000 { |
| compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; |
| reg = <0x01c1a000 0x100>; |
| interrupts = <0 72 4>; |
| clocks = <&ahb1_gates 26>; |
| resets = <&ahb1_rst 26>; |
| phys = <&usbphy 1>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ohci0: usb@01c1a400 { |
| compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; |
| reg = <0x01c1a400 0x100>; |
| interrupts = <0 73 4>; |
| clocks = <&ahb1_gates 29>, <&usb_clk 16>; |
| resets = <&ahb1_rst 29>; |
| phys = <&usbphy 1>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ehci1: usb@01c1b000 { |
| compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; |
| reg = <0x01c1b000 0x100>; |
| interrupts = <0 74 4>; |
| clocks = <&ahb1_gates 27>; |
| resets = <&ahb1_rst 27>; |
| phys = <&usbphy 2>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ohci1: usb@01c1b400 { |
| compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; |
| reg = <0x01c1b400 0x100>; |
| interrupts = <0 75 4>; |
| clocks = <&ahb1_gates 30>, <&usb_clk 17>; |
| resets = <&ahb1_rst 30>; |
| phys = <&usbphy 2>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ohci2: usb@01c1c400 { |
| compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; |
| reg = <0x01c1c400 0x100>; |
| interrupts = <0 77 4>; |
| clocks = <&ahb1_gates 31>, <&usb_clk 18>; |
| resets = <&ahb1_rst 31>; |
| status = "disabled"; |
| }; |
| |
| pio: pinctrl@01c20800 { |
| compatible = "allwinner,sun6i-a31-pinctrl"; |
| reg = <0x01c20800 0x400>; |
| interrupts = <0 11 4>, |
| <0 15 4>, |
| <0 16 4>, |
| <0 17 4>; |
| clocks = <&apb1_gates 5>; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| #size-cells = <0>; |
| #gpio-cells = <3>; |
| |
| uart0_pins_a: uart0@0 { |
| allwinner,pins = "PH20", "PH21"; |
| allwinner,function = "uart0"; |
| allwinner,drive = <0>; |
| allwinner,pull = <0>; |
| }; |
| |
| i2c0_pins_a: i2c0@0 { |
| allwinner,pins = "PH14", "PH15"; |
| allwinner,function = "i2c0"; |
| allwinner,drive = <0>; |
| allwinner,pull = <0>; |
| }; |
| |
| i2c1_pins_a: i2c1@0 { |
| allwinner,pins = "PH16", "PH17"; |
| allwinner,function = "i2c1"; |
| allwinner,drive = <0>; |
| allwinner,pull = <0>; |
| }; |
| |
| i2c2_pins_a: i2c2@0 { |
| allwinner,pins = "PH18", "PH19"; |
| allwinner,function = "i2c2"; |
| allwinner,drive = <0>; |
| allwinner,pull = <0>; |
| }; |
| |
| mmc0_pins_a: mmc0@0 { |
| allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; |
| allwinner,function = "mmc0"; |
| allwinner,drive = <2>; |
| allwinner,pull = <0>; |
| }; |
| |
| gmac_pins_mii_a: gmac_mii@0 { |
| allwinner,pins = "PA0", "PA1", "PA2", "PA3", |
| "PA8", "PA9", "PA11", |
| "PA12", "PA13", "PA14", "PA19", |
| "PA20", "PA21", "PA22", "PA23", |
| "PA24", "PA26", "PA27"; |
| allwinner,function = "gmac"; |
| allwinner,drive = <0>; |
| allwinner,pull = <0>; |
| }; |
| |
| gmac_pins_gmii_a: gmac_gmii@0 { |
| allwinner,pins = "PA0", "PA1", "PA2", "PA3", |
| "PA4", "PA5", "PA6", "PA7", |
| "PA8", "PA9", "PA10", "PA11", |
| "PA12", "PA13", "PA14", "PA15", |
| "PA16", "PA17", "PA18", "PA19", |
| "PA20", "PA21", "PA22", "PA23", |
| "PA24", "PA25", "PA26", "PA27"; |
| allwinner,function = "gmac"; |
| /* |
| * data lines in GMII mode run at 125MHz and |
| * might need a higher signal drive strength |
| */ |
| allwinner,drive = <2>; |
| allwinner,pull = <0>; |
| }; |
| |
| gmac_pins_rgmii_a: gmac_rgmii@0 { |
| allwinner,pins = "PA0", "PA1", "PA2", "PA3", |
| "PA9", "PA10", "PA11", |
| "PA12", "PA13", "PA14", "PA19", |
| "PA20", "PA25", "PA26", "PA27"; |
| allwinner,function = "gmac"; |
| /* |
| * data lines in RGMII mode use DDR mode |
| * and need a higher signal drive strength |
| */ |
| allwinner,drive = <3>; |
| allwinner,pull = <0>; |
| }; |
| }; |
| |
| ahb1_rst: reset@01c202c0 { |
| #reset-cells = <1>; |
| compatible = "allwinner,sun6i-a31-ahb1-reset"; |
| reg = <0x01c202c0 0xc>; |
| }; |
| |
| apb1_rst: reset@01c202d0 { |
| #reset-cells = <1>; |
| compatible = "allwinner,sun6i-a31-clock-reset"; |
| reg = <0x01c202d0 0x4>; |
| }; |
| |
| apb2_rst: reset@01c202d8 { |
| #reset-cells = <1>; |
| compatible = "allwinner,sun6i-a31-clock-reset"; |
| reg = <0x01c202d8 0x4>; |
| }; |
| |
| timer@01c20c00 { |
| compatible = "allwinner,sun4i-a10-timer"; |
| reg = <0x01c20c00 0xa0>; |
| interrupts = <0 18 4>, |
| <0 19 4>, |
| <0 20 4>, |
| <0 21 4>, |
| <0 22 4>; |
| clocks = <&osc24M>; |
| }; |
| |
| wdt1: watchdog@01c20ca0 { |
| compatible = "allwinner,sun6i-a31-wdt"; |
| reg = <0x01c20ca0 0x20>; |
| }; |
| |
| uart0: serial@01c28000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28000 0x400>; |
| interrupts = <0 0 4>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&apb2_gates 16>; |
| resets = <&apb2_rst 16>; |
| dmas = <&dma 6>, <&dma 6>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@01c28400 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28400 0x400>; |
| interrupts = <0 1 4>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&apb2_gates 17>; |
| resets = <&apb2_rst 17>; |
| dmas = <&dma 7>, <&dma 7>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@01c28800 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28800 0x400>; |
| interrupts = <0 2 4>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&apb2_gates 18>; |
| resets = <&apb2_rst 18>; |
| dmas = <&dma 8>, <&dma 8>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@01c28c00 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28c00 0x400>; |
| interrupts = <0 3 4>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&apb2_gates 19>; |
| resets = <&apb2_rst 19>; |
| dmas = <&dma 9>, <&dma 9>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@01c29000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c29000 0x400>; |
| interrupts = <0 4 4>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&apb2_gates 20>; |
| resets = <&apb2_rst 20>; |
| dmas = <&dma 10>, <&dma 10>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart5: serial@01c29400 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c29400 0x400>; |
| interrupts = <0 5 4>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&apb2_gates 21>; |
| resets = <&apb2_rst 21>; |
| dmas = <&dma 22>, <&dma 22>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@01c2ac00 { |
| compatible = "allwinner,sun6i-a31-i2c"; |
| reg = <0x01c2ac00 0x400>; |
| interrupts = <0 6 4>; |
| clocks = <&apb2_gates 0>; |
| resets = <&apb2_rst 0>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c1: i2c@01c2b000 { |
| compatible = "allwinner,sun6i-a31-i2c"; |
| reg = <0x01c2b000 0x400>; |
| interrupts = <0 7 4>; |
| clocks = <&apb2_gates 1>; |
| resets = <&apb2_rst 1>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c2: i2c@01c2b400 { |
| compatible = "allwinner,sun6i-a31-i2c"; |
| reg = <0x01c2b400 0x400>; |
| interrupts = <0 8 4>; |
| clocks = <&apb2_gates 2>; |
| resets = <&apb2_rst 2>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c3: i2c@01c2b800 { |
| compatible = "allwinner,sun6i-a31-i2c"; |
| reg = <0x01c2b800 0x400>; |
| interrupts = <0 9 4>; |
| clocks = <&apb2_gates 3>; |
| resets = <&apb2_rst 3>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| gmac: ethernet@01c30000 { |
| compatible = "allwinner,sun7i-a20-gmac"; |
| reg = <0x01c30000 0x1054>; |
| interrupts = <0 82 4>; |
| interrupt-names = "macirq"; |
| clocks = <&ahb1_gates 17>, <&gmac_tx_clk>; |
| clock-names = "stmmaceth", "allwinner_gmac_tx"; |
| resets = <&ahb1_rst 17>; |
| reset-names = "stmmaceth"; |
| snps,pbl = <2>; |
| snps,fixed-burst; |
| snps,force_sf_dma_mode; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| timer@01c60000 { |
| compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer"; |
| reg = <0x01c60000 0x1000>; |
| interrupts = <0 51 4>, |
| <0 52 4>, |
| <0 53 4>, |
| <0 54 4>; |
| clocks = <&ahb1_gates 19>; |
| resets = <&ahb1_rst 19>; |
| }; |
| |
| spi0: spi@01c68000 { |
| compatible = "allwinner,sun6i-a31-spi"; |
| reg = <0x01c68000 0x1000>; |
| interrupts = <0 65 4>; |
| clocks = <&ahb1_gates 20>, <&spi0_clk>; |
| clock-names = "ahb", "mod"; |
| dmas = <&dma 23>, <&dma 23>; |
| dma-names = "rx", "tx"; |
| resets = <&ahb1_rst 20>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@01c69000 { |
| compatible = "allwinner,sun6i-a31-spi"; |
| reg = <0x01c69000 0x1000>; |
| interrupts = <0 66 4>; |
| clocks = <&ahb1_gates 21>, <&spi1_clk>; |
| clock-names = "ahb", "mod"; |
| dmas = <&dma 24>, <&dma 24>; |
| dma-names = "rx", "tx"; |
| resets = <&ahb1_rst 21>; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@01c6a000 { |
| compatible = "allwinner,sun6i-a31-spi"; |
| reg = <0x01c6a000 0x1000>; |
| interrupts = <0 67 4>; |
| clocks = <&ahb1_gates 22>, <&spi2_clk>; |
| clock-names = "ahb", "mod"; |
| dmas = <&dma 25>, <&dma 25>; |
| dma-names = "rx", "tx"; |
| resets = <&ahb1_rst 22>; |
| status = "disabled"; |
| }; |
| |
| spi3: spi@01c6b000 { |
| compatible = "allwinner,sun6i-a31-spi"; |
| reg = <0x01c6b000 0x1000>; |
| interrupts = <0 68 4>; |
| clocks = <&ahb1_gates 23>, <&spi3_clk>; |
| clock-names = "ahb", "mod"; |
| dmas = <&dma 26>, <&dma 26>; |
| dma-names = "rx", "tx"; |
| resets = <&ahb1_rst 23>; |
| status = "disabled"; |
| }; |
| |
| gic: interrupt-controller@01c81000 { |
| compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; |
| reg = <0x01c81000 0x1000>, |
| <0x01c82000 0x1000>, |
| <0x01c84000 0x2000>, |
| <0x01c86000 0x2000>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupts = <1 9 0xf04>; |
| }; |
| |
| rtc: rtc@01f00000 { |
| compatible = "allwinner,sun6i-a31-rtc"; |
| reg = <0x01f00000 0x54>; |
| interrupts = <0 40 4>, <0 41 4>; |
| }; |
| |
| nmi_intc: interrupt-controller@01f00c0c { |
| compatible = "allwinner,sun6i-a31-sc-nmi"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x01f00c0c 0x38>; |
| interrupts = <0 32 4>; |
| }; |
| |
| prcm@01f01400 { |
| compatible = "allwinner,sun6i-a31-prcm"; |
| reg = <0x01f01400 0x200>; |
| |
| ar100: ar100_clk { |
| compatible = "allwinner,sun6i-a31-ar100-clk"; |
| #clock-cells = <0>; |
| clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; |
| clock-output-names = "ar100"; |
| }; |
| |
| ahb0: ahb0_clk { |
| compatible = "fixed-factor-clock"; |
| #clock-cells = <0>; |
| clock-div = <1>; |
| clock-mult = <1>; |
| clocks = <&ar100>; |
| clock-output-names = "ahb0"; |
| }; |
| |
| apb0: apb0_clk { |
| compatible = "allwinner,sun6i-a31-apb0-clk"; |
| #clock-cells = <0>; |
| clocks = <&ahb0>; |
| clock-output-names = "apb0"; |
| }; |
| |
| apb0_gates: apb0_gates_clk { |
| compatible = "allwinner,sun6i-a31-apb0-gates-clk"; |
| #clock-cells = <1>; |
| clocks = <&apb0>; |
| clock-output-names = "apb0_pio", "apb0_ir", |
| "apb0_timer", "apb0_p2wi", |
| "apb0_uart", "apb0_1wire", |
| "apb0_i2c"; |
| }; |
| |
| apb0_rst: apb0_rst { |
| compatible = "allwinner,sun6i-a31-clock-reset"; |
| #reset-cells = <1>; |
| }; |
| }; |
| |
| cpucfg@01f01c00 { |
| compatible = "allwinner,sun6i-a31-cpuconfig"; |
| reg = <0x01f01c00 0x300>; |
| }; |
| |
| r_pio: pinctrl@01f02c00 { |
| compatible = "allwinner,sun6i-a31-r-pinctrl"; |
| reg = <0x01f02c00 0x400>; |
| interrupts = <0 45 4>, |
| <0 46 4>; |
| clocks = <&apb0_gates 0>; |
| resets = <&apb0_rst 0>; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| #size-cells = <0>; |
| #gpio-cells = <3>; |
| }; |
| }; |
| }; |