net: qlge: convert to hw_features
Another simple conversion.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index 687754d..78dc40c 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -655,32 +655,6 @@
return status;
}
-static u32 ql_get_rx_csum(struct net_device *netdev)
-{
- struct ql_adapter *qdev = netdev_priv(netdev);
- return qdev->rx_csum;
-}
-
-static int ql_set_rx_csum(struct net_device *netdev, uint32_t data)
-{
- struct ql_adapter *qdev = netdev_priv(netdev);
- qdev->rx_csum = data;
- return 0;
-}
-
-static int ql_set_tso(struct net_device *ndev, uint32_t data)
-{
-
- if (data) {
- ndev->features |= NETIF_F_TSO;
- ndev->features |= NETIF_F_TSO6;
- } else {
- ndev->features &= ~NETIF_F_TSO;
- ndev->features &= ~NETIF_F_TSO6;
- }
- return 0;
-}
-
static u32 ql_get_msglevel(struct net_device *ndev)
{
struct ql_adapter *qdev = netdev_priv(ndev);
@@ -707,14 +681,6 @@
.self_test = ql_self_test,
.get_pauseparam = ql_get_pauseparam,
.set_pauseparam = ql_set_pauseparam,
- .get_rx_csum = ql_get_rx_csum,
- .set_rx_csum = ql_set_rx_csum,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = ethtool_op_set_tx_csum,
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
- .get_tso = ethtool_op_get_tso,
- .set_tso = ql_set_tso,
.get_coalesce = ql_get_coalesce,
.set_coalesce = ql_set_coalesce,
.get_sset_count = ql_get_sset_count,
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index f61e717..6c9d124 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -1571,7 +1571,7 @@
skb->protocol = eth_type_trans(skb, ndev);
skb_checksum_none_assert(skb);
- if (qdev->rx_csum &&
+ if ((ndev->features & NETIF_F_RXCSUM) &&
!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
/* TCP frame. */
if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
@@ -1684,7 +1684,7 @@
/* If rx checksum is on, and there are no
* csum or frame errors.
*/
- if (qdev->rx_csum &&
+ if ((ndev->features & NETIF_F_RXCSUM) &&
!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
/* TCP frame. */
if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
@@ -2004,7 +2004,7 @@
/* If rx checksum is on, and there are no
* csum or frame errors.
*/
- if (qdev->rx_csum &&
+ if ((ndev->features & NETIF_F_RXCSUM) &&
!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
/* TCP frame. */
if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
@@ -4621,7 +4621,6 @@
/*
* Set up the operating parameters.
*/
- qdev->rx_csum = 1;
qdev->workqueue = create_singlethread_workqueue(ndev->name);
INIT_DELAYED_WORK(&qdev->asic_reset_work, ql_asic_reset_work);
INIT_DELAYED_WORK(&qdev->mpi_reset_work, ql_mpi_reset_work);
@@ -4695,15 +4694,11 @@
qdev = netdev_priv(ndev);
SET_NETDEV_DEV(ndev, &pdev->dev);
- ndev->features = (0
- | NETIF_F_IP_CSUM
- | NETIF_F_SG
- | NETIF_F_TSO
- | NETIF_F_TSO6
- | NETIF_F_TSO_ECN
- | NETIF_F_HW_VLAN_TX
- | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER);
- ndev->features |= NETIF_F_GRO;
+ ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
+ NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN |
+ NETIF_F_HW_VLAN_TX | NETIF_F_RXCSUM;
+ ndev->features = ndev->hw_features |
+ NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER;
if (test_bit(QL_DMA64, &qdev->flags))
ndev->features |= NETIF_F_HIGHDMA;