pinctrl-sunxi: Fix sun5i-a13 port F multiplexing
The correct value for selecting the mmc0 function on port F pins is 2 not 4,
as per the data-sheet:
http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/drivers/pinctrl/pinctrl-sunxi-pins.h b/drivers/pinctrl/pinctrl-sunxi-pins.h
index 6fd8d4d..3d60669 100644
--- a/drivers/pinctrl/pinctrl-sunxi-pins.h
+++ b/drivers/pinctrl/pinctrl-sunxi-pins.h
@@ -1932,27 +1932,27 @@
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF0,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x4, "mmc0")), /* D1 */
+ SUNXI_FUNCTION(0x2, "mmc0")), /* D1 */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF1,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x4, "mmc0")), /* D0 */
+ SUNXI_FUNCTION(0x2, "mmc0")), /* D0 */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF2,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x4, "mmc0")), /* CLK */
+ SUNXI_FUNCTION(0x2, "mmc0")), /* CLK */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF3,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x4, "mmc0")), /* CMD */
+ SUNXI_FUNCTION(0x2, "mmc0")), /* CMD */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF4,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x4, "mmc0")), /* D3 */
+ SUNXI_FUNCTION(0x2, "mmc0")), /* D3 */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF5,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x4, "mmc0")), /* D2 */
+ SUNXI_FUNCTION(0x2, "mmc0")), /* D2 */
/* Hole */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PG0,
SUNXI_FUNCTION(0x0, "gpio_in"),