libata: stop overloading port_info->private_data
port_info->private_data is currently used for two purposes - to record
private data about the port_info or to specify host->private_data to
use when allocating ata_host.
This overloading is confusing and counter-intuitive in that
port_info->private_data becomes host->private_data instead of
port->private_data. In addition, port_info and host don't correspond
to each other 1-to-1. Currently, the first non-NULL
port_info->private_data is used.
This patch makes port_info->private_data just be what it is -
private_data for the port_info where LLD can jot down extra info.
libata no longer sets host->private_data to the first non-NULL
port_info->private_data, @host_priv argument is added to
ata_pci_init_one() instead. LLDs which use ata_pci_init_one() can use
this argument to pass in pointer to host private data. LLDs which
don't should use init-register model anyway and can initialize
host->private_data directly.
Adding @host_priv instead of using init-register model for LLDs which
use ata_pci_init_one() is suggested by Alan Cox.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index a912ee0..b23e2a10 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -152,7 +152,7 @@
if (dev->vendor == PCI_VENDOR_ID_AL)
ata_pci_clear_simplex(dev);
- return ata_pci_init_one(dev, ppi, &generic_sht);
+ return ata_pci_init_one(dev, ppi, &generic_sht, NULL);
}
static struct pci_device_id ata_generic[] = {
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index abbe322..aa6bcd7 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -6995,8 +6995,6 @@
if (!host->ops && (pi->port_ops != &ata_dummy_port_ops))
host->ops = pi->port_ops;
- if (!host->private_data && pi->private_data)
- host->private_data = pi->private_data;
}
return host;
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index a9d5898..6223ec0 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -827,6 +827,7 @@
* @pdev: Controller to be initialized
* @ppi: array of port_info, must be enough for two ports
* @sht: scsi_host_template to use when registering the host
+ * @host_priv: host private_data
*
* This is a helper function which can be called from a driver's
* xxx_init_one() probe function if the hardware uses traditional
@@ -848,7 +849,7 @@
*/
int ata_pci_init_one(struct pci_dev *pdev,
const struct ata_port_info * const * ppi,
- struct scsi_host_template *sht)
+ struct scsi_host_template *sht, void *host_priv)
{
struct device *dev = &pdev->dev;
const struct ata_port_info *pi = NULL;
@@ -882,6 +883,7 @@
rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
if (rc)
goto out;
+ host->private_data = host_priv;
pci_set_master(pdev);
rc = ata_pci_activate_sff_host(host, ata_interrupt, sht);
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 3edde51..d337f32 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -68,20 +68,6 @@
}
/**
- * pacpi_error_handler - Setup and error handler
- * @ap: Port to handle
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void pacpi_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, pacpi_pre_reset, ata_std_softreset, NULL,
- ata_std_postreset);
-}
-
-/**
* pacpi_discover_modes - filter non ACPI modes
* @adev: ATA device
* @mask: proposed modes
@@ -242,7 +228,7 @@
.mode_filter = pacpi_mode_filter,
.set_piomode = pacpi_set_piomode,
.set_dmamode = pacpi_set_dmamode,
- .error_handler = pacpi_error_handler,
+ .prereset = pacpi_pre_reset,
.port_start = pacpi_port_start,
};
@@ -273,7 +259,7 @@
.port_ops = &pacpi_ops,
};
const struct ata_port_info *ppi[] = { &info, NULL };
- return ata_pci_init_one(pdev, ppi, &pacpi_sht);
+ return ata_pci_init_one(pdev, ppi, &pacpi_sht, NULL);
}
static const struct pci_device_id pacpi_pci_tbl[] = {
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index f292499..43c558f 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -552,7 +552,7 @@
ppi[0] = &info_20_udma;
pci_dev_put(isa_bridge);
}
- return ata_pci_init_one(pdev, ppi, &ali_sht);
+ return ata_pci_init_one(pdev, ppi, &ali_sht, NULL);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 644702c..09c8286 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -144,12 +144,6 @@
return ata_std_prereset(link, deadline);
}
-static void amd_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, amd_pre_reset, ata_std_softreset, NULL,
- ata_std_postreset);
-}
-
static int amd_cable_detect(struct ata_port *ap)
{
static const u32 bitmask[2] = {0x03, 0x0C};
@@ -300,13 +294,6 @@
return ata_std_prereset(link, deadline);
}
-static void nv_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, nv_pre_reset,
- ata_std_softreset, NULL,
- ata_std_postreset);
-}
-
/**
* nv100_set_piomode - set initial PIO mode data
* @ap: ATA interface
@@ -358,7 +345,7 @@
static const struct ata_port_operations amd_base_port_ops = {
.inherits = &ata_bmdma_port_ops,
- .error_handler = amd_error_handler,
+ .prereset = amd_pre_reset,
};
static struct ata_port_operations amd33_port_ops = {
@@ -393,7 +380,7 @@
.inherits = &ata_bmdma_port_ops,
.cable_detect = ata_cable_ignore,
.mode_filter = nv_mode_filter,
- .error_handler = nv_error_handler,
+ .prereset = nv_pre_reset,
.host_stop = nv_host_stop,
};
@@ -483,10 +470,10 @@
.port_ops = &amd100_port_ops
}
};
- struct ata_port_info pi;
- const struct ata_port_info *ppi[] = { &pi, NULL };
+ const struct ata_port_info *ppi[] = { NULL, NULL };
static int printed_version;
int type = id->driver_data;
+ void *hpriv = NULL;
u8 fifo;
int rc;
@@ -511,7 +498,7 @@
/*
* Okay, type is determined now. Apply type-specific workarounds.
*/
- pi = info[type];
+ ppi[0] = &info[type];
if (type < 3)
ata_pci_clear_simplex(pdev);
@@ -530,11 +517,11 @@
u32 udma;
pci_read_config_dword(pdev, 0x60, &udma);
- pi.private_data = (void *)(unsigned long)udma;
+ hpriv = (void *)(unsigned long)udma;
}
/* And fire it up */
- return ata_pci_init_one(pdev, ppi, &amd_sht);
+ return ata_pci_init_one(pdev, ppi, &amd_sht, hpriv);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 698a53c..ebd15ca 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -430,7 +430,7 @@
BUG_ON(ppi[0] == NULL);
- return ata_pci_init_one(pdev, ppi, &artop_sht);
+ return ata_pci_init_one(pdev, ppi, &artop_sht, NULL);
}
static const struct pci_device_id artop_pci_tbl[] = {
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 6fe433b..0bea7e7 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -248,7 +248,7 @@
.port_ops = &atiixp_port_ops
};
const struct ata_port_info *ppi[] = { &info, NULL };
- return ata_pci_init_one(dev, ppi, &atiixp_sht);
+ return ata_pci_init_one(dev, ppi, &atiixp_sht, NULL);
}
static const struct pci_device_id atiixp[] = {
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index efd2bb5..27219b0 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -224,7 +224,7 @@
cmd640_hardware_init(pdev);
- return ata_pci_init_one(pdev, ppi, &cmd640_sht);
+ return ata_pci_init_one(pdev, ppi, &cmd640_sht, NULL);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index bfd72ef..f0e5666 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -373,7 +373,7 @@
pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
#endif
- return ata_pci_init_one(pdev, ppi, &cmd64x_sht);
+ return ata_pci_init_one(pdev, ppi, &cmd64x_sht, NULL);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index c632ce4..ac3ad55 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -325,7 +325,7 @@
ppi[1] = &info_palmax_secondary;
/* Now kick off ATA set up */
- return ata_pci_init_one(pdev, ppi, &cs5530_sht);
+ return ata_pci_init_one(pdev, ppi, &cs5530_sht, NULL);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index d78cf95..5c0762e 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -199,7 +199,7 @@
rdmsr(ATAC_CH0D1_PIO, timings, dummy);
if (CS5535_BAD_PIO(timings))
wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0);
- return ata_pci_init_one(dev, ppi, &cs5535_sht);
+ return ata_pci_init_one(dev, ppi, &cs5535_sht, NULL);
}
static const struct pci_device_id cs5535[] = {
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index f7c0e4e..2d34b91 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -261,7 +261,7 @@
return -ENODEV;
}
- return ata_pci_init_one(dev, ppi, &cs5536_sht);
+ return ata_pci_init_one(dev, ppi, &cs5536_sht, NULL);
}
static const struct pci_device_id cs5536[] = {
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index cbd6670..ae14969 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -136,7 +136,7 @@
if (PCI_FUNC(pdev->devfn) != 1)
return -ENODEV;
- return ata_pci_init_one(pdev, ppi, &cy82c693_sht);
+ return ata_pci_init_one(pdev, ppi, &cy82c693_sht, NULL);
}
static const struct pci_device_id cy82c693[] = {
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 0260eda..2f5b484 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -275,7 +275,7 @@
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_init_one(pdev, ppi, &efar_sht);
+ return ata_pci_init_one(pdev, ppi, &efar_sht, NULL);
}
static const struct pci_device_id efar_pci_tbl[] = {
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index b62d398..c2d4923 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -356,9 +356,9 @@
.udma_mask = ATA_UDMA4,
.port_ops = &hpt366_port_ops
};
- struct ata_port_info info = info_hpt366;
- const struct ata_port_info *ppi[] = { &info, NULL };
+ const struct ata_port_info *ppi[] = { &info_hpt366, NULL };
+ void *hpriv = NULL;
u32 class_rev;
u32 reg1;
int rc;
@@ -383,17 +383,17 @@
/* info_hpt366 is safe against re-entry so we can scribble on it */
switch((reg1 & 0x700) >> 8) {
case 5:
- info.private_data = &hpt366_40;
+ hpriv = &hpt366_40;
break;
case 9:
- info.private_data = &hpt366_25;
+ hpriv = &hpt366_25;
break;
default:
- info.private_data = &hpt366_33;
+ hpriv = &hpt366_33;
break;
}
/* Now kick off ATA set up */
- return ata_pci_init_one(dev, ppi, &hpt36x_sht);
+ return ata_pci_init_one(dev, ppi, &hpt36x_sht, hpriv);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index a43c1975..fb37e3a 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -831,10 +831,8 @@
};
static const int MHz[4] = { 33, 40, 50, 66 };
- const struct ata_port_info *port;
void *private_data = NULL;
- struct ata_port_info port_info;
- const struct ata_port_info *ppi[] = { &port_info, NULL };
+ const struct ata_port_info *ppi[] = { NULL, NULL };
u8 irqmask;
u32 class_rev;
@@ -866,17 +864,17 @@
switch(class_rev) {
case 3:
- port = &info_hpt370;
+ ppi[0] = &info_hpt370;
chip_table = &hpt370;
prefer_dpll = 0;
break;
case 4:
- port = &info_hpt370a;
+ ppi[0] = &info_hpt370a;
chip_table = &hpt370a;
prefer_dpll = 0;
break;
case 5:
- port = &info_hpt372;
+ ppi[0] = &info_hpt372;
chip_table = &hpt372;
break;
default:
@@ -889,21 +887,21 @@
/* 372N if rev >= 2*/
if (class_rev >= 2)
return -ENODEV;
- port = &info_hpt372;
+ ppi[0] = &info_hpt372;
chip_table = &hpt372a;
break;
case PCI_DEVICE_ID_TTI_HPT302:
/* 302N if rev > 1 */
if (class_rev > 1)
return -ENODEV;
- port = &info_hpt372;
+ ppi[0] = &info_hpt372;
/* Check this */
chip_table = &hpt302;
break;
case PCI_DEVICE_ID_TTI_HPT371:
if (class_rev > 1)
return -ENODEV;
- port = &info_hpt372;
+ ppi[0] = &info_hpt372;
chip_table = &hpt371;
/* Single channel device, master is not present
but the BIOS (or us for non x86) must mark it
@@ -914,7 +912,7 @@
break;
case PCI_DEVICE_ID_TTI_HPT374:
chip_table = &hpt374;
- port = &info_hpt374;
+ ppi[0] = &info_hpt374;
break;
default:
printk(KERN_ERR "pata_hpt37x: PCI table is bogus please report (%d).\n", dev->device);
@@ -993,7 +991,7 @@
int dpll, adjust;
/* Compute DPLL */
- dpll = (port->udma_mask & 0xC0) ? 3 : 2;
+ dpll = (ppi[0]->udma_mask & 0xC0) ? 3 : 2;
f_low = (MHz[clock_slot] * 48) / MHz[dpll];
f_high = f_low + 2;
@@ -1033,19 +1031,16 @@
* about lack of UDMA133 support on lower clocks
*/
- if (clock_slot < 2 && port == &info_hpt370)
- port = &info_hpt370_33;
- if (clock_slot < 2 && port == &info_hpt370a)
- port = &info_hpt370a_33;
+ if (clock_slot < 2 && ppi[0] == &info_hpt370)
+ ppi[0] = &info_hpt370_33;
+ if (clock_slot < 2 && ppi[0] == &info_hpt370a)
+ ppi[0] = &info_hpt370a_33;
printk(KERN_INFO "pata_hpt37x: %s using %dMHz bus clock.\n",
chip_table->name, MHz[clock_slot]);
}
/* Now kick off ATA set up */
- port_info = *port;
- port_info.private_data = private_data;
-
- return ata_pci_init_one(dev, ppi, &hpt37x_sht);
+ return ata_pci_init_one(dev, ppi, &hpt37x_sht, private_data);
}
static const struct pci_device_id hpt37x[] = {
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 2c178c3..c774be9 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -458,8 +458,7 @@
.udma_mask = ATA_UDMA6,
.port_ops = &hpt3x2n_port_ops
};
- struct ata_port_info port = info;
- const struct ata_port_info *ppi[] = { &port, NULL };
+ const struct ata_port_info *ppi[] = { &info, NULL };
u8 irqmask;
u32 class_rev;
@@ -468,6 +467,7 @@
unsigned int f_low, f_high;
int adjust;
unsigned long iobase = pci_resource_start(dev, 4);
+ void *hpriv = NULL;
int rc;
rc = pcim_enable_device(dev);
@@ -554,9 +554,8 @@
pci_mhz);
/* Set our private data up. We only need a few flags so we use
it directly */
- port.private_data = NULL;
if (pci_mhz > 60) {
- port.private_data = (void *)PCI66;
+ hpriv = (void *)PCI66;
/*
* On HPT371N, if ATA clock is 66 MHz we must set bit 2 in
* the MISC. register to stretch the UltraDMA Tss timing.
@@ -567,7 +566,7 @@
}
/* Now kick off ATA set up */
- return ata_pci_init_one(dev, ppi, &hpt3x2n_sht);
+ return ata_pci_init_one(dev, ppi, &hpt3x2n_sht, hpriv);
}
static const struct pci_device_id hpt3x2n[] = {
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index 291a0d6..d23a46b 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -287,7 +287,7 @@
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_init_one(pdev, ppi, &it8213_sht);
+ return ata_pci_init_one(pdev, ppi, &it8213_sht, NULL);
}
static const struct pci_device_id it8213_pci_tbl[] = {
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 63c5cf0..6a8a4dd 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -722,7 +722,7 @@
else
ppi[0] = &info_smart;
- return ata_pci_init_one(pdev, ppi, &it821x_sht);
+ return ata_pci_init_one(pdev, ppi, &it821x_sht, NULL);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 859e47a..317f347 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -105,20 +105,6 @@
return ata_std_prereset(link, deadline);
}
-/**
- * jmicron_error_handler - Setup and error handler
- * @ap: Port to handle
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void jmicron_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, jmicron_pre_reset, ata_std_softreset, NULL,
- ata_std_postreset);
-}
-
/* No PIO or DMA methods needed for this device */
static struct scsi_host_template jmicron_sht = {
@@ -127,7 +113,7 @@
static struct ata_port_operations jmicron_ops = {
.inherits = &ata_bmdma_port_ops,
- .error_handler = jmicron_error_handler,
+ .prereset = jmicron_pre_reset,
};
@@ -158,7 +144,7 @@
};
const struct ata_port_info *ppi[] = { &info, NULL };
- return ata_pci_init_one(pdev, ppi, &jmicron_sht);
+ return ata_pci_init_one(pdev, ppi, &jmicron_sht, NULL);
}
static const struct pci_device_id jmicron_pci_tbl[] = {
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index d8da4f34..d38e64c 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -75,20 +75,6 @@
return 0; /* Our BUG macro needs the right markup */
}
-/**
- * marvell_error_handler - Setup and error handler
- * @ap: Port to handle
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void marvell_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, marvell_pre_reset, ata_std_softreset, NULL,
- ata_std_postreset);
-}
-
/* No PIO or DMA methods needed for this device */
static struct scsi_host_template marvell_sht = {
@@ -98,7 +84,7 @@
static struct ata_port_operations marvell_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = marvell_cable_detect,
- .error_handler = marvell_error_handler,
+ .prereset = marvell_pre_reset,
};
@@ -142,7 +128,7 @@
if (pdev->device == 0x6101)
ppi[1] = &ata_dummy_port_info;
- return ata_pci_init_one(pdev, ppi, &marvell_sht);
+ return ata_pci_init_one(pdev, ppi, &marvell_sht, NULL);
}
static const struct pci_device_id marvell_pci_tbl[] = {
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index ae50a5e..3491828 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -71,7 +71,7 @@
ata_pci_clear_simplex(pdev);
/* And let the library code do the work */
- return ata_pci_init_one(pdev, port_info, &netcell_sht);
+ return ata_pci_init_one(pdev, port_info, &netcell_sht, NULL);
}
static const struct pci_device_id netcell_pci_tbl[] = {
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 1bdca8f..5a043e4 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -163,7 +163,7 @@
.port_ops = &ns87410_port_ops
};
const struct ata_port_info *ppi[] = { &info, NULL };
- return ata_pci_init_one(dev, ppi, &ns87410_sht);
+ return ata_pci_init_one(dev, ppi, &ns87410_sht, NULL);
}
static const struct pci_device_id ns87410[] = {
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index 4250894..cdd79d6 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -375,7 +375,7 @@
pci_write_config_byte(pdev, 0x55, 0xEE);
/* Select PIO0 8bit clocking */
pci_write_config_byte(pdev, 0x54, 0xB7);
- return ata_pci_init_one(pdev, ppi, &ns87415_sht);
+ return ata_pci_init_one(pdev, ppi, &ns87415_sht, NULL);
}
static const struct pci_device_id ns87415_pci_tbl[] = {
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 9e3afad..7001b75 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -263,7 +263,7 @@
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_init_one(pdev, ppi, &oldpiix_sht);
+ return ata_pci_init_one(pdev, ppi, &oldpiix_sht, NULL);
}
static const struct pci_device_id oldpiix_pci_tbl[] = {
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index 8601d9c..5a5f20e 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -188,7 +188,7 @@
if (!printed_version++)
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
- return ata_pci_init_one(dev, ppi, &opti_sht);
+ return ata_pci_init_one(dev, ppi, &opti_sht, NULL);
}
static const struct pci_device_id opti[] = {
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index c376f9e..ba2819f 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -445,7 +445,7 @@
if (optiplus_with_udma(dev))
ppi[0] = &info_82c700_udma;
- return ata_pci_init_one(dev, ppi, &optidma_sht);
+ return ata_pci_init_one(dev, ppi, &optidma_sht, NULL);
}
static const struct pci_device_id optidma[] = {
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 5545fba..8214100 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -324,7 +324,7 @@
return -ENODEV;
}
}
- return ata_pci_init_one(dev, ppi, &pdc202xx_sht);
+ return ata_pci_init_one(dev, ppi, &pdc202xx_sht, NULL);
}
static const struct pci_device_id pdc202xx[] = {
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 145d5ba..9ab84fc 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -228,7 +228,7 @@
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_init_one(pdev, ppi, &radisys_sht);
+ return ata_pci_init_one(pdev, ppi, &radisys_sht, NULL);
}
static const struct pci_device_id radisys_pci_tbl[] = {
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 04be6ae..462b72a 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -99,7 +99,7 @@
printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
if (rz1000_fifo_disable(pdev) == 0)
- return ata_pci_init_one(pdev, ppi, &rz1000_sht);
+ return ata_pci_init_one(pdev, ppi, &rz1000_sht, NULL);
printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n");
/* Not safe to use so skip */
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 38c7fb0..42efacf 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -213,7 +213,7 @@
/* Can't enable port 2 yet, see top comments */
const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
- return ata_pci_init_one(dev, ppi, &sc1200_sht);
+ return ata_pci_init_one(dev, ppi, &sc1200_sht, NULL);
}
static const struct pci_device_id sc1200[] = {
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 515b5b7..2f4f9b0 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -461,7 +461,7 @@
if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
ata_pci_clear_simplex(pdev);
- return ata_pci_init_one(pdev, ppi, &serverworks_sht);
+ return ata_pci_init_one(pdev, ppi, &serverworks_sht, NULL);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 5313dee..63fafc6 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -362,7 +362,7 @@
&sil680_sht);
use_ioports:
- return ata_pci_init_one(pdev, ppi, &sil680_sht);
+ return ata_pci_init_one(pdev, ppi, &sil680_sht, NULL);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 32be13b..28abfc2 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -690,8 +690,7 @@
static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
- struct ata_port_info port;
- const struct ata_port_info *ppi[] = { &port, NULL };
+ const struct ata_port_info *ppi[] = { NULL, NULL };
struct pci_dev *host = NULL;
struct sis_chipset *chipset = NULL;
struct sis_chipset *sets;
@@ -831,12 +830,11 @@
if (chipset == NULL)
return -ENODEV;
- port = *chipset->info;
- port.private_data = chipset;
+ ppi[0] = chipset->info;
sis_fixup(pdev, chipset);
- return ata_pci_init_one(pdev, ppi, &sis_sht);
+ return ata_pci_init_one(pdev, ppi, &sis_sht, chipset);
}
static const struct pci_device_id sis_pci_tbl[] = {
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 2d14b25..1d97f92 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -323,7 +323,7 @@
val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
pci_write_config_dword(dev, 0x40, val);
- return ata_pci_init_one(dev, ppi, &sl82c105_sht);
+ return ata_pci_init_one(dev, ppi, &sl82c105_sht, NULL);
}
static const struct pci_device_id sl82c105[] = {
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 86dc66c..f07b0e5 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -206,7 +206,7 @@
if (!printed_version++)
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
- return ata_pci_init_one(dev, ppi, &triflex_sht);
+ return ata_pci_init_one(dev, ppi, &triflex_sht, NULL);
}
static const struct pci_device_id triflex[] = {
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index e66bb85..f4092cb 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -442,8 +442,7 @@
.udma_mask = ATA_UDMA6, /* FIXME: should check north bridge */
.port_ops = &via_port_ops
};
- struct ata_port_info type;
- const struct ata_port_info *ppi[] = { &type, NULL };
+ const struct ata_port_info *ppi[] = { NULL, NULL };
struct pci_dev *isa = NULL;
const struct via_isa_bridge *config;
static int printed_version;
@@ -491,25 +490,25 @@
switch(config->flags & VIA_UDMA) {
case VIA_UDMA_NONE:
if (config->flags & VIA_NO_UNMASK)
- type = via_mwdma_info_borked;
+ ppi[0] = &via_mwdma_info_borked;
else
- type = via_mwdma_info;
+ ppi[0] = &via_mwdma_info;
break;
case VIA_UDMA_33:
- type = via_udma33_info;
+ ppi[0] = &via_udma33_info;
break;
case VIA_UDMA_66:
- type = via_udma66_info;
+ ppi[0] = &via_udma66_info;
/* The 66 MHz devices require we enable the clock */
pci_read_config_dword(pdev, 0x50, &timing);
timing |= 0x80008;
pci_write_config_dword(pdev, 0x50, timing);
break;
case VIA_UDMA_100:
- type = via_udma100_info;
+ ppi[0] = &via_udma100_info;
break;
case VIA_UDMA_133:
- type = via_udma133_info;
+ ppi[0] = &via_udma133_info;
break;
default:
WARN_ON(1);
@@ -524,9 +523,7 @@
}
/* We have established the device type, now fire it up */
- type.private_data = (void *)config;
-
- return ata_pci_init_one(pdev, ppi, &via_sht);
+ return ata_pci_init_one(pdev, ppi, &via_sht, (void *)config);
}
#ifdef CONFIG_PM
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 5494119..e7f10a8 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1020,7 +1020,7 @@
extern int ata_pci_init_one(struct pci_dev *pdev,
const struct ata_port_info * const * ppi,
- struct scsi_host_template *sht);
+ struct scsi_host_template *sht, void *host_priv);
extern void ata_pci_remove_one(struct pci_dev *pdev);
#ifdef CONFIG_PM
extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg);