USB: f81232: implement RX bulk-in EP
The F81232 bulk-in is RX data + LSR channel, data format is
[LSR+Data][LSR+Data]..... , We had implemented in f81232_process_read_urb().
Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
[johan: reword comment in process_read_urb ]
Signed-off-by: Johan Hovold <johan@kernel.org>
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 669a2f2..4664cf4 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -23,6 +23,7 @@
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
+#include <linux/serial_reg.h>
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1934, 0x0706) },
@@ -104,44 +105,50 @@
static void f81232_process_read_urb(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
- struct f81232_private *priv = usb_get_serial_port_data(port);
unsigned char *data = urb->transfer_buffer;
- char tty_flag = TTY_NORMAL;
- unsigned long flags;
- u8 line_status;
- int i;
+ char tty_flag;
+ unsigned int i;
+ u8 lsr;
- /* update line status */
- spin_lock_irqsave(&priv->lock, flags);
- line_status = priv->modem_status;
- priv->modem_status &= ~UART_STATE_TRANSIENT_MASK;
- spin_unlock_irqrestore(&priv->lock, flags);
-
- if (!urb->actual_length)
+ /*
+ * When opening the port we get a 1-byte packet with the current LSR,
+ * which we discard.
+ */
+ if ((urb->actual_length < 2) || (urb->actual_length % 2))
return;
- /* break takes precedence over parity, */
- /* which takes precedence over framing errors */
- if (line_status & UART_BREAK_ERROR)
- tty_flag = TTY_BREAK;
- else if (line_status & UART_PARITY_ERROR)
- tty_flag = TTY_PARITY;
- else if (line_status & UART_FRAME_ERROR)
- tty_flag = TTY_FRAME;
- dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__, tty_flag);
+ /* bulk-in data: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]... */
- /* overrun is special, not associated with a char */
- if (line_status & UART_OVERRUN_ERROR)
- tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
+ for (i = 0; i < urb->actual_length; i += 2) {
+ tty_flag = TTY_NORMAL;
+ lsr = data[i];
- if (port->port.console && port->sysrq) {
- for (i = 0; i < urb->actual_length; ++i)
- if (!usb_serial_handle_sysrq_char(port, data[i]))
- tty_insert_flip_char(&port->port, data[i],
- tty_flag);
- } else {
- tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag,
- urb->actual_length);
+ if (lsr & UART_LSR_BRK_ERROR_BITS) {
+ if (lsr & UART_LSR_BI) {
+ tty_flag = TTY_BREAK;
+ port->icount.brk++;
+ usb_serial_handle_break(port);
+ } else if (lsr & UART_LSR_PE) {
+ tty_flag = TTY_PARITY;
+ port->icount.parity++;
+ } else if (lsr & UART_LSR_FE) {
+ tty_flag = TTY_FRAME;
+ port->icount.frame++;
+ }
+
+ if (lsr & UART_LSR_OE) {
+ port->icount.overrun++;
+ tty_insert_flip_char(&port->port, 0,
+ TTY_OVERRUN);
+ }
+ }
+
+ if (port->port.console && port->sysrq) {
+ if (usb_serial_handle_sysrq_char(port, data[i + 1]))
+ continue;
+ }
+
+ tty_insert_flip_char(&port->port, data[i + 1], tty_flag);
}
tty_flip_buffer_push(&port->port);