ALSA: aoa: clean up file names
This cleans up the apple onboard audio driver filenames.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/aoa/fabrics/layout.c b/sound/aoa/fabrics/layout.c
new file mode 100644
index 0000000..ad60f5d
--- /dev/null
+++ b/sound/aoa/fabrics/layout.c
@@ -0,0 +1,1120 @@
+/*
+ * Apple Onboard Audio driver -- layout fabric
+ *
+ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * GPL v2, can be found in COPYING.
+ *
+ *
+ * This fabric module looks for sound codecs
+ * based on the layout-id property in the device tree.
+ *
+ */
+
+#include <asm/prom.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include "../aoa.h"
+#include "../soundbus/soundbus.h"
+
+MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Layout-ID fabric for snd-aoa");
+
+#define MAX_CODECS_PER_BUS 2
+
+/* These are the connections the layout fabric
+ * knows about. It doesn't really care about the
+ * input ones, but I thought I'd separate them
+ * to give them proper names. The thing is that
+ * Apple usually will distinguish the active output
+ * by GPIOs, while the active input is set directly
+ * on the codec. Hence we here tell the codec what
+ * we think is connected. This information is hard-
+ * coded below ... */
+#define CC_SPEAKERS (1<<0)
+#define CC_HEADPHONE (1<<1)
+#define CC_LINEOUT (1<<2)
+#define CC_DIGITALOUT (1<<3)
+#define CC_LINEIN (1<<4)
+#define CC_MICROPHONE (1<<5)
+#define CC_DIGITALIN (1<<6)
+/* pretty bogus but users complain...
+ * This is a flag saying that the LINEOUT
+ * should be renamed to HEADPHONE.
+ * be careful with input detection! */
+#define CC_LINEOUT_LABELLED_HEADPHONE (1<<7)
+
+struct codec_connection {
+ /* CC_ flags from above */
+ int connected;
+ /* codec dependent bit to be set in the aoa_codec.connected field.
+ * This intentionally doesn't have any generic flags because the
+ * fabric has to know the codec anyway and all codecs might have
+ * different connectors */
+ int codec_bit;
+};
+
+struct codec_connect_info {
+ char *name;
+ struct codec_connection *connections;
+};
+
+#define LAYOUT_FLAG_COMBO_LINEOUT_SPDIF (1<<0)
+
+struct layout {
+ unsigned int layout_id;
+ struct codec_connect_info codecs[MAX_CODECS_PER_BUS];
+ int flags;
+
+ /* if busname is not assigned, we use 'Master' below,
+ * so that our layout table doesn't need to be filled
+ * too much.
+ * We only assign these two if we expect to find more
+ * than one soundbus, i.e. on those machines with
+ * multiple layout-ids */
+ char *busname;
+ int pcmid;
+};
+
+MODULE_ALIAS("sound-layout-36");
+MODULE_ALIAS("sound-layout-41");
+MODULE_ALIAS("sound-layout-45");
+MODULE_ALIAS("sound-layout-47");
+MODULE_ALIAS("sound-layout-48");
+MODULE_ALIAS("sound-layout-49");
+MODULE_ALIAS("sound-layout-50");
+MODULE_ALIAS("sound-layout-51");
+MODULE_ALIAS("sound-layout-56");
+MODULE_ALIAS("sound-layout-57");
+MODULE_ALIAS("sound-layout-58");
+MODULE_ALIAS("sound-layout-60");
+MODULE_ALIAS("sound-layout-61");
+MODULE_ALIAS("sound-layout-62");
+MODULE_ALIAS("sound-layout-64");
+MODULE_ALIAS("sound-layout-65");
+MODULE_ALIAS("sound-layout-66");
+MODULE_ALIAS("sound-layout-67");
+MODULE_ALIAS("sound-layout-68");
+MODULE_ALIAS("sound-layout-69");
+MODULE_ALIAS("sound-layout-70");
+MODULE_ALIAS("sound-layout-72");
+MODULE_ALIAS("sound-layout-76");
+MODULE_ALIAS("sound-layout-80");
+MODULE_ALIAS("sound-layout-82");
+MODULE_ALIAS("sound-layout-84");
+MODULE_ALIAS("sound-layout-86");
+MODULE_ALIAS("sound-layout-90");
+MODULE_ALIAS("sound-layout-92");
+MODULE_ALIAS("sound-layout-94");
+MODULE_ALIAS("sound-layout-96");
+MODULE_ALIAS("sound-layout-98");
+MODULE_ALIAS("sound-layout-100");
+
+/* onyx with all but microphone connected */
+static struct codec_connection onyx_connections_nomic[] = {
+ {
+ .connected = CC_SPEAKERS | CC_HEADPHONE | CC_LINEOUT,
+ .codec_bit = 0,
+ },
+ {
+ .connected = CC_DIGITALOUT,
+ .codec_bit = 1,
+ },
+ {
+ .connected = CC_LINEIN,
+ .codec_bit = 2,
+ },
+ {} /* terminate array by .connected == 0 */
+};
+
+/* onyx on machines without headphone */
+static struct codec_connection onyx_connections_noheadphones[] = {
+ {
+ .connected = CC_SPEAKERS | CC_LINEOUT |
+ CC_LINEOUT_LABELLED_HEADPHONE,
+ .codec_bit = 0,
+ },
+ {
+ .connected = CC_DIGITALOUT,
+ .codec_bit = 1,
+ },
+ /* FIXME: are these correct? probably not for all the machines
+ * below ... If not this will need separating. */
+ {
+ .connected = CC_LINEIN,
+ .codec_bit = 2,
+ },
+ {
+ .connected = CC_MICROPHONE,
+ .codec_bit = 3,
+ },
+ {} /* terminate array by .connected == 0 */
+};
+
+/* onyx on machines with real line-out */
+static struct codec_connection onyx_connections_reallineout[] = {
+ {
+ .connected = CC_SPEAKERS | CC_LINEOUT | CC_HEADPHONE,
+ .codec_bit = 0,
+ },
+ {
+ .connected = CC_DIGITALOUT,
+ .codec_bit = 1,
+ },
+ {
+ .connected = CC_LINEIN,
+ .codec_bit = 2,
+ },
+ {} /* terminate array by .connected == 0 */
+};
+
+/* tas on machines without line out */
+static struct codec_connection tas_connections_nolineout[] = {
+ {
+ .connected = CC_SPEAKERS | CC_HEADPHONE,
+ .codec_bit = 0,
+ },
+ {
+ .connected = CC_LINEIN,
+ .codec_bit = 2,
+ },
+ {
+ .connected = CC_MICROPHONE,
+ .codec_bit = 3,
+ },
+ {} /* terminate array by .connected == 0 */
+};
+
+/* tas on machines with neither line out nor line in */
+static struct codec_connection tas_connections_noline[] = {
+ {
+ .connected = CC_SPEAKERS | CC_HEADPHONE,
+ .codec_bit = 0,
+ },
+ {
+ .connected = CC_MICROPHONE,
+ .codec_bit = 3,
+ },
+ {} /* terminate array by .connected == 0 */
+};
+
+/* tas on machines without microphone */
+static struct codec_connection tas_connections_nomic[] = {
+ {
+ .connected = CC_SPEAKERS | CC_HEADPHONE | CC_LINEOUT,
+ .codec_bit = 0,
+ },
+ {
+ .connected = CC_LINEIN,
+ .codec_bit = 2,
+ },
+ {} /* terminate array by .connected == 0 */
+};
+
+/* tas on machines with everything connected */
+static struct codec_connection tas_connections_all[] = {
+ {
+ .connected = CC_SPEAKERS | CC_HEADPHONE | CC_LINEOUT,
+ .codec_bit = 0,
+ },
+ {
+ .connected = CC_LINEIN,
+ .codec_bit = 2,
+ },
+ {
+ .connected = CC_MICROPHONE,
+ .codec_bit = 3,
+ },
+ {} /* terminate array by .connected == 0 */
+};
+
+static struct codec_connection toonie_connections[] = {
+ {
+ .connected = CC_SPEAKERS | CC_HEADPHONE,
+ .codec_bit = 0,
+ },
+ {} /* terminate array by .connected == 0 */
+};
+
+static struct codec_connection topaz_input[] = {
+ {
+ .connected = CC_DIGITALIN,
+ .codec_bit = 0,
+ },
+ {} /* terminate array by .connected == 0 */
+};
+
+static struct codec_connection topaz_output[] = {
+ {
+ .connected = CC_DIGITALOUT,
+ .codec_bit = 1,
+ },
+ {} /* terminate array by .connected == 0 */
+};
+
+static struct codec_connection topaz_inout[] = {
+ {
+ .connected = CC_DIGITALIN,
+ .codec_bit = 0,
+ },
+ {
+ .connected = CC_DIGITALOUT,
+ .codec_bit = 1,
+ },
+ {} /* terminate array by .connected == 0 */
+};
+
+static struct layout layouts[] = {
+ /* last PowerBooks (15" Oct 2005) */
+ { .layout_id = 82,
+ .flags = LAYOUT_FLAG_COMBO_LINEOUT_SPDIF,
+ .codecs[0] = {
+ .name = "onyx",
+ .connections = onyx_connections_noheadphones,
+ },
+ .codecs[1] = {
+ .name = "topaz",
+ .connections = topaz_input,
+ },
+ },
+ /* PowerMac9,1 */
+ { .layout_id = 60,
+ .codecs[0] = {
+ .name = "onyx",
+ .connections = onyx_connections_reallineout,
+ },
+ },
+ /* PowerMac9,1 */
+ { .layout_id = 61,
+ .codecs[0] = {
+ .name = "topaz",
+ .connections = topaz_input,
+ },
+ },
+ /* PowerBook5,7 */
+ { .layout_id = 64,
+ .flags = LAYOUT_FLAG_COMBO_LINEOUT_SPDIF,
+ .codecs[0] = {
+ .name = "onyx",
+ .connections = onyx_connections_noheadphones,
+ },
+ },
+ /* PowerBook5,7 */
+ { .layout_id = 65,
+ .codecs[0] = {
+ .name = "topaz",
+ .connections = topaz_input,
+ },
+ },
+ /* PowerBook5,9 [17" Oct 2005] */
+ { .layout_id = 84,
+ .flags = LAYOUT_FLAG_COMBO_LINEOUT_SPDIF,
+ .codecs[0] = {
+ .name = "onyx",
+ .connections = onyx_connections_noheadphones,
+ },
+ .codecs[1] = {
+ .name = "topaz",
+ .connections = topaz_input,
+ },
+ },
+ /* PowerMac8,1 */
+ { .layout_id = 45,
+ .codecs[0] = {
+ .name = "onyx",
+ .connections = onyx_connections_noheadphones,
+ },
+ .codecs[1] = {
+ .name = "topaz",
+ .connections = topaz_input,
+ },
+ },
+ /* Quad PowerMac (analog in, analog/digital out) */
+ { .layout_id = 68,
+ .codecs[0] = {
+ .name = "onyx",
+ .connections = onyx_connections_nomic,
+ },
+ },
+ /* Quad PowerMac (digital in) */
+ { .layout_id = 69,
+ .codecs[0] = {
+ .name = "topaz",
+ .connections = topaz_input,
+ },
+ .busname = "digital in", .pcmid = 1 },
+ /* Early 2005 PowerBook (PowerBook 5,6) */
+ { .layout_id = 70,
+ .codecs[0] = {
+ .name = "tas",
+ .connections = tas_connections_nolineout,
+ },
+ },
+ /* PowerBook 5,4 */
+ { .layout_id = 51,
+ .codecs[0] = {
+ .name = "tas",
+ .connections = tas_connections_nolineout,
+ },
+ },
+ /* PowerBook6,7 */
+ { .layout_id = 80,
+ .codecs[0] = {
+ .name = "tas",
+ .connections = tas_connections_noline,
+ },
+ },
+ /* PowerBook6,8 */
+ { .layout_id = 72,
+ .codecs[0] = {
+ .name = "tas",
+ .connections = tas_connections_nolineout,
+ },
+ },
+ /* PowerMac8,2 */
+ { .layout_id = 86,
+ .codecs[0] = {
+ .name = "onyx",
+ .connections = onyx_connections_nomic,
+ },
+ .codecs[1] = {
+ .name = "topaz",
+ .connections = topaz_input,
+ },
+ },
+ /* PowerBook6,7 */
+ { .layout_id = 92,
+ .codecs[0] = {
+ .name = "tas",
+ .connections = tas_connections_nolineout,
+ },
+ },
+ /* PowerMac10,1 (Mac Mini) */
+ { .layout_id = 58,
+ .codecs[0] = {
+ .name = "toonie",
+ .connections = toonie_connections,
+ },
+ },
+ {
+ .layout_id = 96,
+ .codecs[0] = {
+ .name = "onyx",
+ .connections = onyx_connections_noheadphones,
+ },
+ },
+ /* unknown, untested, but this comes from Apple */
+ { .layout_id = 41,
+ .codecs[0] = {
+ .name = "tas",
+ .connections = tas_connections_all,
+ },
+ },
+ { .layout_id = 36,
+ .codecs[0] = {
+ .name = "tas",
+ .connections = tas_connections_nomic,
+ },
+ .codecs[1] = {
+ .name = "topaz",
+ .connections = topaz_inout,
+ },
+ },
+ { .layout_id = 47,
+ .codecs[0] = {
+ .name = "onyx",
+ .connections = onyx_connections_noheadphones,
+ },
+ },
+ { .layout_id = 48,
+ .codecs[0] = {
+ .name = "topaz",
+ .connections = topaz_input,
+ },
+ },
+ { .layout_id = 49,
+ .codecs[0] = {
+ .name = "onyx",
+ .connections = onyx_connections_nomic,
+ },
+ },
+ { .layout_id = 50,
+ .codecs[0] = {
+ .name = "topaz",
+ .connections = topaz_input,
+ },
+ },
+ { .layout_id = 56,
+ .codecs[0] = {
+ .name = "onyx",
+ .connections = onyx_connections_noheadphones,
+ },
+ },
+ { .layout_id = 57,
+ .codecs[0] = {
+ .name = "topaz",
+ .connections = topaz_input,
+ },
+ },
+ { .layout_id = 62,
+ .codecs[0] = {
+ .name = "onyx",
+ .connections = onyx_connections_noheadphones,
+ },
+ .codecs[1] = {
+ .name = "topaz",
+ .connections = topaz_output,
+ },
+ },
+ { .layout_id = 66,
+ .codecs[0] = {
+ .name = "onyx",
+ .connections = onyx_connections_noheadphones,
+ },
+ },
+ { .layout_id = 67,
+ .codecs[0] = {
+ .name = "topaz",
+ .connections = topaz_input,
+ },
+ },
+ { .layout_id = 76,
+ .codecs[0] = {
+ .name = "tas",
+ .connections = tas_connections_nomic,
+ },
+ .codecs[1] = {
+ .name = "topaz",
+ .connections = topaz_inout,
+ },
+ },
+ { .layout_id = 90,
+ .codecs[0] = {
+ .name = "tas",
+ .connections = tas_connections_noline,
+ },
+ },
+ { .layout_id = 94,
+ .codecs[0] = {
+ .name = "onyx",
+ /* but it has an external mic?? how to select? */
+ .connections = onyx_connections_noheadphones,
+ },
+ },
+ { .layout_id = 98,
+ .codecs[0] = {
+ .name = "toonie",
+ .connections = toonie_connections,
+ },
+ },
+ { .layout_id = 100,
+ .codecs[0] = {
+ .name = "topaz",
+ .connections = topaz_input,
+ },
+ .codecs[1] = {
+ .name = "onyx",
+ .connections = onyx_connections_noheadphones,
+ },
+ },
+ {}
+};
+
+static struct layout *find_layout_by_id(unsigned int id)
+{
+ struct layout *l;
+
+ l = layouts;
+ while (l->layout_id) {
+ if (l->layout_id == id)
+ return l;
+ l++;
+ }
+ return NULL;
+}
+
+static void use_layout(struct layout *l)
+{
+ int i;
+
+ for (i=0; i<MAX_CODECS_PER_BUS; i++) {
+ if (l->codecs[i].name) {
+ request_module("snd-aoa-codec-%s", l->codecs[i].name);
+ }
+ }
+ /* now we wait for the codecs to call us back */
+}
+
+struct layout_dev;
+
+struct layout_dev_ptr {
+ struct layout_dev *ptr;
+};
+
+struct layout_dev {
+ struct list_head list;
+ struct soundbus_dev *sdev;
+ struct device_node *sound;
+ struct aoa_codec *codecs[MAX_CODECS_PER_BUS];
+ struct layout *layout;
+ struct gpio_runtime gpio;
+
+ /* we need these for headphone/lineout detection */
+ struct snd_kcontrol *headphone_ctrl;
+ struct snd_kcontrol *lineout_ctrl;
+ struct snd_kcontrol *speaker_ctrl;
+ struct snd_kcontrol *headphone_detected_ctrl;
+ struct snd_kcontrol *lineout_detected_ctrl;
+
+ struct layout_dev_ptr selfptr_headphone;
+ struct layout_dev_ptr selfptr_lineout;
+
+ u32 have_lineout_detect:1,
+ have_headphone_detect:1,
+ switch_on_headphone:1,
+ switch_on_lineout:1;
+};
+
+static LIST_HEAD(layouts_list);
+static int layouts_list_items;
+/* this can go away but only if we allow multiple cards,
+ * make the fabric handle all the card stuff, etc... */
+static struct layout_dev *layout_device;
+
+#define control_info snd_ctl_boolean_mono_info
+
+#define AMP_CONTROL(n, description) \
+static int n##_control_get(struct snd_kcontrol *kcontrol, \
+ struct snd_ctl_elem_value *ucontrol) \
+{ \
+ struct gpio_runtime *gpio = snd_kcontrol_chip(kcontrol); \
+ if (gpio->methods && gpio->methods->get_##n) \
+ ucontrol->value.integer.value[0] = \
+ gpio->methods->get_##n(gpio); \
+ return 0; \
+} \
+static int n##_control_put(struct snd_kcontrol *kcontrol, \
+ struct snd_ctl_elem_value *ucontrol) \
+{ \
+ struct gpio_runtime *gpio = snd_kcontrol_chip(kcontrol); \
+ if (gpio->methods && gpio->methods->get_##n) \
+ gpio->methods->set_##n(gpio, \
+ !!ucontrol->value.integer.value[0]); \
+ return 1; \
+} \
+static struct snd_kcontrol_new n##_ctl = { \
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = description, \
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, \
+ .info = control_info, \
+ .get = n##_control_get, \
+ .put = n##_control_put, \
+}
+
+AMP_CONTROL(headphone, "Headphone Switch");
+AMP_CONTROL(speakers, "Speakers Switch");
+AMP_CONTROL(lineout, "Line-Out Switch");
+
+static int detect_choice_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct layout_dev *ldev = snd_kcontrol_chip(kcontrol);
+
+ switch (kcontrol->private_value) {
+ case 0:
+ ucontrol->value.integer.value[0] = ldev->switch_on_headphone;
+ break;
+ case 1:
+ ucontrol->value.integer.value[0] = ldev->switch_on_lineout;
+ break;
+ default:
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static int detect_choice_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct layout_dev *ldev = snd_kcontrol_chip(kcontrol);
+
+ switch (kcontrol->private_value) {
+ case 0:
+ ldev->switch_on_headphone = !!ucontrol->value.integer.value[0];
+ break;
+ case 1:
+ ldev->switch_on_lineout = !!ucontrol->value.integer.value[0];
+ break;
+ default:
+ return -ENODEV;
+ }
+ return 1;
+}
+
+static struct snd_kcontrol_new headphone_detect_choice = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Headphone Detect Autoswitch",
+ .info = control_info,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .get = detect_choice_get,
+ .put = detect_choice_put,
+ .private_value = 0,
+};
+
+static struct snd_kcontrol_new lineout_detect_choice = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Line-Out Detect Autoswitch",
+ .info = control_info,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .get = detect_choice_get,
+ .put = detect_choice_put,
+ .private_value = 1,
+};
+
+static int detected_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct layout_dev *ldev = snd_kcontrol_chip(kcontrol);
+ int v;
+
+ switch (kcontrol->private_value) {
+ case 0:
+ v = ldev->gpio.methods->get_detect(&ldev->gpio,
+ AOA_NOTIFY_HEADPHONE);
+ break;
+ case 1:
+ v = ldev->gpio.methods->get_detect(&ldev->gpio,
+ AOA_NOTIFY_LINE_OUT);
+ break;
+ default:
+ return -ENODEV;
+ }
+ ucontrol->value.integer.value[0] = v;
+ return 0;
+}
+
+static struct snd_kcontrol_new headphone_detected = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Headphone Detected",
+ .info = control_info,
+ .access = SNDRV_CTL_ELEM_ACCESS_READ,
+ .get = detected_get,
+ .private_value = 0,
+};
+
+static struct snd_kcontrol_new lineout_detected = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Line-Out Detected",
+ .info = control_info,
+ .access = SNDRV_CTL_ELEM_ACCESS_READ,
+ .get = detected_get,
+ .private_value = 1,
+};
+
+static int check_codec(struct aoa_codec *codec,
+ struct layout_dev *ldev,
+ struct codec_connect_info *cci)
+{
+ const u32 *ref;
+ char propname[32];
+ struct codec_connection *cc;
+
+ /* if the codec has a 'codec' node, we require a reference */
+ if (codec->node && (strcmp(codec->node->name, "codec") == 0)) {
+ snprintf(propname, sizeof(propname),
+ "platform-%s-codec-ref", codec->name);
+ ref = of_get_property(ldev->sound, propname, NULL);
+ if (!ref) {
+ printk(KERN_INFO "snd-aoa-fabric-layout: "
+ "required property %s not present\n", propname);
+ return -ENODEV;
+ }
+ if (*ref != codec->node->linux_phandle) {
+ printk(KERN_INFO "snd-aoa-fabric-layout: "
+ "%s doesn't match!\n", propname);
+ return -ENODEV;
+ }
+ } else {
+ if (layouts_list_items != 1) {
+ printk(KERN_INFO "snd-aoa-fabric-layout: "
+ "more than one soundbus, but no references.\n");
+ return -ENODEV;
+ }
+ }
+ codec->soundbus_dev = ldev->sdev;
+ codec->gpio = &ldev->gpio;
+
+ cc = cci->connections;
+ if (!cc)
+ return -EINVAL;
+
+ printk(KERN_INFO "snd-aoa-fabric-layout: can use this codec\n");
+
+ codec->connected = 0;
+ codec->fabric_data = cc;
+
+ while (cc->connected) {
+ codec->connected |= 1<<cc->codec_bit;
+ cc++;
+ }
+
+ return 0;
+}
+
+static int layout_found_codec(struct aoa_codec *codec)
+{
+ struct layout_dev *ldev;
+ int i;
+
+ list_for_each_entry(ldev, &layouts_list, list) {
+ for (i=0; i<MAX_CODECS_PER_BUS; i++) {
+ if (!ldev->layout->codecs[i].name)
+ continue;
+ if (strcmp(ldev->layout->codecs[i].name, codec->name) == 0) {
+ if (check_codec(codec,
+ ldev,
+ &ldev->layout->codecs[i]) == 0)
+ return 0;
+ }
+ }
+ }
+ return -ENODEV;
+}
+
+static void layout_remove_codec(struct aoa_codec *codec)
+{
+ int i;
+ /* here remove the codec from the layout dev's
+ * codec reference */
+
+ codec->soundbus_dev = NULL;
+ codec->gpio = NULL;
+ for (i=0; i<MAX_CODECS_PER_BUS; i++) {
+ }
+}
+
+static void layout_notify(void *data)
+{
+ struct layout_dev_ptr *dptr = data;
+ struct layout_dev *ldev;
+ int v, update;
+ struct snd_kcontrol *detected, *c;
+ struct snd_card *card = aoa_get_card();
+
+ ldev = dptr->ptr;
+ if (data == &ldev->selfptr_headphone) {
+ v = ldev->gpio.methods->get_detect(&ldev->gpio, AOA_NOTIFY_HEADPHONE);
+ detected = ldev->headphone_detected_ctrl;
+ update = ldev->switch_on_headphone;
+ if (update) {
+ ldev->gpio.methods->set_speakers(&ldev->gpio, !v);
+ ldev->gpio.methods->set_headphone(&ldev->gpio, v);
+ ldev->gpio.methods->set_lineout(&ldev->gpio, 0);
+ }
+ } else if (data == &ldev->selfptr_lineout) {
+ v = ldev->gpio.methods->get_detect(&ldev->gpio, AOA_NOTIFY_LINE_OUT);
+ detected = ldev->lineout_detected_ctrl;
+ update = ldev->switch_on_lineout;
+ if (update) {
+ ldev->gpio.methods->set_speakers(&ldev->gpio, !v);
+ ldev->gpio.methods->set_headphone(&ldev->gpio, 0);
+ ldev->gpio.methods->set_lineout(&ldev->gpio, v);
+ }
+ } else
+ return;
+
+ if (detected)
+ snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &detected->id);
+ if (update) {
+ c = ldev->headphone_ctrl;
+ if (c)
+ snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &c->id);
+ c = ldev->speaker_ctrl;
+ if (c)
+ snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &c->id);
+ c = ldev->lineout_ctrl;
+ if (c)
+ snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &c->id);
+ }
+}
+
+static void layout_attached_codec(struct aoa_codec *codec)
+{
+ struct codec_connection *cc;
+ struct snd_kcontrol *ctl;
+ int headphones, lineout;
+ struct layout_dev *ldev = layout_device;
+
+ /* need to add this codec to our codec array! */
+
+ cc = codec->fabric_data;
+
+ headphones = codec->gpio->methods->get_detect(codec->gpio,
+ AOA_NOTIFY_HEADPHONE);
+ lineout = codec->gpio->methods->get_detect(codec->gpio,
+ AOA_NOTIFY_LINE_OUT);
+
+ while (cc->connected) {
+ if (cc->connected & CC_SPEAKERS) {
+ if (headphones <= 0 && lineout <= 0)
+ ldev->gpio.methods->set_speakers(codec->gpio, 1);
+ ctl = snd_ctl_new1(&speakers_ctl, codec->gpio);
+ ldev->speaker_ctrl = ctl;
+ aoa_snd_ctl_add(ctl);
+ }
+ if (cc->connected & CC_HEADPHONE) {
+ if (headphones == 1)
+ ldev->gpio.methods->set_headphone(codec->gpio, 1);
+ ctl = snd_ctl_new1(&headphone_ctl, codec->gpio);
+ ldev->headphone_ctrl = ctl;
+ aoa_snd_ctl_add(ctl);
+ ldev->have_headphone_detect =
+ !ldev->gpio.methods
+ ->set_notify(&ldev->gpio,
+ AOA_NOTIFY_HEADPHONE,
+ layout_notify,
+ &ldev->selfptr_headphone);
+ if (ldev->have_headphone_detect) {
+ ctl = snd_ctl_new1(&headphone_detect_choice,
+ ldev);
+ aoa_snd_ctl_add(ctl);
+ ctl = snd_ctl_new1(&headphone_detected,
+ ldev);
+ ldev->headphone_detected_ctrl = ctl;
+ aoa_snd_ctl_add(ctl);
+ }
+ }
+ if (cc->connected & CC_LINEOUT) {
+ if (lineout == 1)
+ ldev->gpio.methods->set_lineout(codec->gpio, 1);
+ ctl = snd_ctl_new1(&lineout_ctl, codec->gpio);
+ if (cc->connected & CC_LINEOUT_LABELLED_HEADPHONE)
+ strlcpy(ctl->id.name,
+ "Headphone Switch", sizeof(ctl->id.name));
+ ldev->lineout_ctrl = ctl;
+ aoa_snd_ctl_add(ctl);
+ ldev->have_lineout_detect =
+ !ldev->gpio.methods
+ ->set_notify(&ldev->gpio,
+ AOA_NOTIFY_LINE_OUT,
+ layout_notify,
+ &ldev->selfptr_lineout);
+ if (ldev->have_lineout_detect) {
+ ctl = snd_ctl_new1(&lineout_detect_choice,
+ ldev);
+ if (cc->connected & CC_LINEOUT_LABELLED_HEADPHONE)
+ strlcpy(ctl->id.name,
+ "Headphone Detect Autoswitch",
+ sizeof(ctl->id.name));
+ aoa_snd_ctl_add(ctl);
+ ctl = snd_ctl_new1(&lineout_detected,
+ ldev);
+ if (cc->connected & CC_LINEOUT_LABELLED_HEADPHONE)
+ strlcpy(ctl->id.name,
+ "Headphone Detected",
+ sizeof(ctl->id.name));
+ ldev->lineout_detected_ctrl = ctl;
+ aoa_snd_ctl_add(ctl);
+ }
+ }
+ cc++;
+ }
+ /* now update initial state */
+ if (ldev->have_headphone_detect)
+ layout_notify(&ldev->selfptr_headphone);
+ if (ldev->have_lineout_detect)
+ layout_notify(&ldev->selfptr_lineout);
+}
+
+static struct aoa_fabric layout_fabric = {
+ .name = "SoundByLayout",
+ .owner = THIS_MODULE,
+ .found_codec = layout_found_codec,
+ .remove_codec = layout_remove_codec,
+ .attached_codec = layout_attached_codec,
+};
+
+static int aoa_fabric_layout_probe(struct soundbus_dev *sdev)
+{
+ struct device_node *sound = NULL;
+ const unsigned int *layout_id;
+ struct layout *layout;
+ struct layout_dev *ldev = NULL;
+ int err;
+
+ /* hm, currently we can only have one ... */
+ if (layout_device)
+ return -ENODEV;
+
+ /* by breaking out we keep a reference */
+ while ((sound = of_get_next_child(sdev->ofdev.node, sound))) {
+ if (sound->type && strcasecmp(sound->type, "soundchip") == 0)
+ break;
+ }
+ if (!sound) return -ENODEV;
+
+ layout_id = of_get_property(sound, "layout-id", NULL);
+ if (!layout_id)
+ goto outnodev;
+ printk(KERN_INFO "snd-aoa-fabric-layout: found bus with layout %d\n",
+ *layout_id);
+
+ layout = find_layout_by_id(*layout_id);
+ if (!layout) {
+ printk(KERN_ERR "snd-aoa-fabric-layout: unknown layout\n");
+ goto outnodev;
+ }
+
+ ldev = kzalloc(sizeof(struct layout_dev), GFP_KERNEL);
+ if (!ldev)
+ goto outnodev;
+
+ layout_device = ldev;
+ ldev->sdev = sdev;
+ ldev->sound = sound;
+ ldev->layout = layout;
+ ldev->gpio.node = sound->parent;
+ switch (layout->layout_id) {
+ case 41: /* that unknown machine no one seems to have */
+ case 51: /* PowerBook5,4 */
+ case 58: /* Mac Mini */
+ ldev->gpio.methods = ftr_gpio_methods;
+ printk(KERN_DEBUG
+ "snd-aoa-fabric-layout: Using direct GPIOs\n");
+ break;
+ default:
+ ldev->gpio.methods = pmf_gpio_methods;
+ printk(KERN_DEBUG
+ "snd-aoa-fabric-layout: Using PMF GPIOs\n");
+ }
+ ldev->selfptr_headphone.ptr = ldev;
+ ldev->selfptr_lineout.ptr = ldev;
+ sdev->ofdev.dev.driver_data = ldev;
+ list_add(&ldev->list, &layouts_list);
+ layouts_list_items++;
+
+ /* assign these before registering ourselves, so
+ * callbacks that are done during registration
+ * already have the values */
+ sdev->pcmid = ldev->layout->pcmid;
+ if (ldev->layout->busname) {
+ sdev->pcmname = ldev->layout->busname;
+ } else {
+ sdev->pcmname = "Master";
+ }
+
+ ldev->gpio.methods->init(&ldev->gpio);
+
+ err = aoa_fabric_register(&layout_fabric, &sdev->ofdev.dev);
+ if (err && err != -EALREADY) {
+ printk(KERN_INFO "snd-aoa-fabric-layout: can't use,"
+ " another fabric is active!\n");
+ goto outlistdel;
+ }
+
+ use_layout(layout);
+ ldev->switch_on_headphone = 1;
+ ldev->switch_on_lineout = 1;
+ return 0;
+ outlistdel:
+ /* we won't be using these then... */
+ ldev->gpio.methods->exit(&ldev->gpio);
+ /* reset if we didn't use it */
+ sdev->pcmname = NULL;
+ sdev->pcmid = -1;
+ list_del(&ldev->list);
+ layouts_list_items--;
+ outnodev:
+ of_node_put(sound);
+ layout_device = NULL;
+ kfree(ldev);
+ return -ENODEV;
+}
+
+static int aoa_fabric_layout_remove(struct soundbus_dev *sdev)
+{
+ struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
+ int i;
+
+ for (i=0; i<MAX_CODECS_PER_BUS; i++) {
+ if (ldev->codecs[i]) {
+ aoa_fabric_unlink_codec(ldev->codecs[i]);
+ }
+ ldev->codecs[i] = NULL;
+ }
+ list_del(&ldev->list);
+ layouts_list_items--;
+ of_node_put(ldev->sound);
+
+ ldev->gpio.methods->set_notify(&ldev->gpio,
+ AOA_NOTIFY_HEADPHONE,
+ NULL,
+ NULL);
+ ldev->gpio.methods->set_notify(&ldev->gpio,
+ AOA_NOTIFY_LINE_OUT,
+ NULL,
+ NULL);
+
+ ldev->gpio.methods->exit(&ldev->gpio);
+ layout_device = NULL;
+ kfree(ldev);
+ sdev->pcmid = -1;
+ sdev->pcmname = NULL;
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int aoa_fabric_layout_suspend(struct soundbus_dev *sdev, pm_message_t state)
+{
+ struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
+
+ if (ldev->gpio.methods && ldev->gpio.methods->all_amps_off)
+ ldev->gpio.methods->all_amps_off(&ldev->gpio);
+
+ return 0;
+}
+
+static int aoa_fabric_layout_resume(struct soundbus_dev *sdev)
+{
+ struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
+
+ if (ldev->gpio.methods && ldev->gpio.methods->all_amps_off)
+ ldev->gpio.methods->all_amps_restore(&ldev->gpio);
+
+ return 0;
+}
+#endif
+
+static struct soundbus_driver aoa_soundbus_driver = {
+ .name = "snd_aoa_soundbus_drv",
+ .owner = THIS_MODULE,
+ .probe = aoa_fabric_layout_probe,
+ .remove = aoa_fabric_layout_remove,
+#ifdef CONFIG_PM
+ .suspend = aoa_fabric_layout_suspend,
+ .resume = aoa_fabric_layout_resume,
+#endif
+ .driver = {
+ .owner = THIS_MODULE,
+ }
+};
+
+static int __init aoa_fabric_layout_init(void)
+{
+ int err;
+
+ err = soundbus_register_driver(&aoa_soundbus_driver);
+ if (err)
+ return err;
+ return 0;
+}
+
+static void __exit aoa_fabric_layout_exit(void)
+{
+ soundbus_unregister_driver(&aoa_soundbus_driver);
+ aoa_fabric_unregister(&layout_fabric);
+}
+
+module_init(aoa_fabric_layout_init);
+module_exit(aoa_fabric_layout_exit);