[media] rtl28xxu: bind tua9001 using I2C binding
Change tua9001 driver from media binding to I2C client binding.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
index 3ff4362..2bb7105 100644
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -1100,10 +1100,6 @@
return ret;
}
-static struct tua9001_config rtl2832u_tua9001_config = {
- .i2c_addr = 0x60,
-};
-
static const struct fc0012_config rtl2832u_fc0012_config = {
.i2c_address = 0x63, /* 0xc6 >> 1 */
.xtal_freq = FC_XTAL_28_8_MHZ,
@@ -1203,7 +1199,12 @@
dev->i2c_client_tuner = client;
}
break;
- case TUNER_RTL2832_TUA9001:
+ case TUNER_RTL2832_TUA9001: {
+ struct tua9001_platform_data tua9001_pdata = {
+ .dvb_frontend = adap->fe[0],
+ };
+ struct i2c_board_info board_info = {};
+
/* enable GPIO1 and GPIO4 as output */
ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x12);
if (ret)
@@ -1213,10 +1214,20 @@
if (ret)
goto err;
- fe = dvb_attach(tua9001_attach, adap->fe[0],
- dev->demod_i2c_adapter,
- &rtl2832u_tua9001_config);
+ strlcpy(board_info.type, "tua9001", I2C_NAME_SIZE);
+ board_info.addr = 0x60;
+ board_info.platform_data = &tua9001_pdata;
+ request_module("tua9001");
+ client = i2c_new_device(dev->demod_i2c_adapter, &board_info);
+ if (client == NULL || client->dev.driver == NULL)
+ break;
+ if (!try_module_get(client->dev.driver->owner)) {
+ i2c_unregister_device(client);
+ break;
+ }
+ dev->i2c_client_tuner = client;
break;
+ }
case TUNER_RTL2832_R820T:
fe = dvb_attach(r820t_attach, adap->fe[0],
dev->demod_i2c_adapter,