Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index ae31968..cc9e02d 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -31,10 +31,12 @@
#include "led.h"
#define IEEE80211_AUTH_TIMEOUT (HZ / 5)
+#define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2)
#define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10)
#define IEEE80211_AUTH_MAX_TRIES 3
#define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5)
#define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
+#define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2)
#define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10)
#define IEEE80211_ASSOC_MAX_TRIES 3
@@ -209,8 +211,9 @@
struct ieee80211_channel *channel,
const struct ieee80211_ht_operation *ht_oper,
const struct ieee80211_vht_operation *vht_oper,
- struct cfg80211_chan_def *chandef, bool verbose)
+ struct cfg80211_chan_def *chandef, bool tracking)
{
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct cfg80211_chan_def vht_chandef;
u32 ht_cfreq, ret;
@@ -229,7 +232,7 @@
ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
channel->band);
/* check that channel matches the right operating channel */
- if (channel->center_freq != ht_cfreq) {
+ if (!tracking && channel->center_freq != ht_cfreq) {
/*
* It's possible that some APs are confused here;
* Netgear WNDR3700 sometimes reports 4 higher than
@@ -237,11 +240,10 @@
* since we look at probe response/beacon data here
* it should be OK.
*/
- if (verbose)
- sdata_info(sdata,
- "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
- channel->center_freq, ht_cfreq,
- ht_oper->primary_chan, channel->band);
+ sdata_info(sdata,
+ "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
+ channel->center_freq, ht_cfreq,
+ ht_oper->primary_chan, channel->band);
ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
goto out;
}
@@ -295,7 +297,7 @@
channel->band);
break;
default:
- if (verbose)
+ if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
sdata_info(sdata,
"AP VHT operation IE has invalid channel width (%d), disable VHT\n",
vht_oper->chan_width);
@@ -304,7 +306,7 @@
}
if (!cfg80211_chandef_valid(&vht_chandef)) {
- if (verbose)
+ if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
sdata_info(sdata,
"AP VHT information is invalid, disable VHT\n");
ret = IEEE80211_STA_DISABLE_VHT;
@@ -317,7 +319,7 @@
}
if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
- if (verbose)
+ if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
sdata_info(sdata,
"AP VHT information doesn't match HT, disable VHT\n");
ret = IEEE80211_STA_DISABLE_VHT;
@@ -333,18 +335,27 @@
if (ret & IEEE80211_STA_DISABLE_VHT)
vht_chandef = *chandef;
+ /*
+ * Ignore the DISABLED flag when we're already connected and only
+ * tracking the APs beacon for bandwidth changes - otherwise we
+ * might get disconnected here if we connect to an AP, update our
+ * regulatory information based on the AP's country IE and the
+ * information we have is wrong/outdated and disables the channel
+ * that we're actually using for the connection to the AP.
+ */
while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
- IEEE80211_CHAN_DISABLED)) {
+ tracking ? 0 :
+ IEEE80211_CHAN_DISABLED)) {
if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
ret = IEEE80211_STA_DISABLE_HT |
IEEE80211_STA_DISABLE_VHT;
- goto out;
+ break;
}
ret |= chandef_downgrade(chandef);
}
- if (chandef->width != vht_chandef.width && verbose)
+ if (chandef->width != vht_chandef.width && !tracking)
sdata_info(sdata,
"capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
@@ -384,7 +395,7 @@
/* calculate new channel (type) based on HT/VHT operation IEs */
flags = ieee80211_determine_chantype(sdata, sband, chan, ht_oper,
- vht_oper, &chandef, false);
+ vht_oper, &chandef, true);
/*
* Downgrade the new channel if we associated with restricted
@@ -3394,10 +3405,13 @@
if (tx_flags == 0) {
auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
- ifmgd->auth_data->timeout_started = true;
+ auth_data->timeout_started = true;
run_again(sdata, auth_data->timeout);
} else {
- auth_data->timeout_started = false;
+ auth_data->timeout =
+ round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG);
+ auth_data->timeout_started = true;
+ run_again(sdata, auth_data->timeout);
}
return 0;
@@ -3434,7 +3448,11 @@
assoc_data->timeout_started = true;
run_again(sdata, assoc_data->timeout);
} else {
- assoc_data->timeout_started = false;
+ assoc_data->timeout =
+ round_jiffies_up(jiffies +
+ IEEE80211_ASSOC_TIMEOUT_LONG);
+ assoc_data->timeout_started = true;
+ run_again(sdata, assoc_data->timeout);
}
return 0;
@@ -3829,7 +3847,7 @@
ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
cbss->channel,
ht_oper, vht_oper,
- &chandef, true);
+ &chandef, false);
sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss),
local->rx_chains);
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 4f9f216..a8c29fa 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -765,6 +765,7 @@
cfg80211_leave_mesh(rdev, dev);
break;
case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_P2P_GO:
cfg80211_stop_ap(rdev, dev);
break;
default:
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 25d217d9..3fcba69 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -441,10 +441,12 @@
goto out_unlock;
}
*rdev = wiphy_to_dev((*wdev)->wiphy);
- cb->args[0] = (*rdev)->wiphy_idx;
+ /* 0 is the first index - add 1 to parse only once */
+ cb->args[0] = (*rdev)->wiphy_idx + 1;
cb->args[1] = (*wdev)->identifier;
} else {
- struct wiphy *wiphy = wiphy_idx_to_wiphy(cb->args[0]);
+ /* subtract the 1 again here */
+ struct wiphy *wiphy = wiphy_idx_to_wiphy(cb->args[0] - 1);
struct wireless_dev *tmp;
if (!wiphy) {