drivers/phy/phy-ti-pipe3.c - kernel/msm-4.9 - Gitiles

 /*
  * phy-ti-pipe3 - PIPE3 PHY driver.
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * Author: Kishon Vijay Abraham I <kishon@ti.com>
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  */

 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/phy/phy.h>
 #include <linux/of.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/pm_runtime.h>
 #include <linux/delay.h>
 #include <linux/phy/omap_control_phy.h>
 #include <linux/of_platform.h>

 #define	PLL_STATUS		0x00000004
 #define	PLL_GO			0x00000008
 #define	PLL_CONFIGURATION1	0x0000000C
 #define	PLL_CONFIGURATION2	0x00000010
 #define	PLL_CONFIGURATION3	0x00000014
 #define	PLL_CONFIGURATION4	0x00000020

 #define	PLL_REGM_MASK		0x001FFE00
 #define	PLL_REGM_SHIFT		0x9
 #define	PLL_REGM_F_MASK		0x0003FFFF
 #define	PLL_REGM_F_SHIFT	0x0
 #define	PLL_REGN_MASK		0x000001FE
 #define	PLL_REGN_SHIFT		0x1
 #define	PLL_SELFREQDCO_MASK	0x0000000E
 #define	PLL_SELFREQDCO_SHIFT	0x1
 #define	PLL_SD_MASK		0x0003FC00
 #define	PLL_SD_SHIFT		10
 #define	SET_PLL_GO		0x1
 #define PLL_LDOPWDN		BIT(15)
 #define PLL_TICOPWDN		BIT(16)
 #define	PLL_LOCK		0x2
 #define	PLL_IDLE		0x1

 /*
  * This is an Empirical value that works, need to confirm the actual
  * value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status
  * to be correctly reflected in the PIPE3PHY_PLL_STATUS register.
  */
 #define PLL_IDLE_TIME	100	/* in milliseconds */
 #define PLL_LOCK_TIME	100	/* in milliseconds */

 struct pipe3_dpll_params {
 	u16	m;
 	u8	n;
 	u8	freq:3;
 	u8	sd;
 	u32	mf;
 };

 struct pipe3_dpll_map {
 	unsigned long rate;
 	struct pipe3_dpll_params params;
 };

 struct ti_pipe3 {
 	void __iomem		*pll_ctrl_base;
 	struct device		*dev;
 	struct device		*control_dev;
 	struct clk		*wkupclk;
 	struct clk		*sys_clk;
 	struct clk		*refclk;
 	struct clk		*div_clk;
 	struct pipe3_dpll_map	*dpll_map;
 };

 static struct pipe3_dpll_map dpll_map_usb[] = {
 	{12000000, {1250, 5, 4, 20, 0} },	/* 12 MHz */
 	{16800000, {3125, 20, 4, 20, 0} },	/* 16.8 MHz */
 	{19200000, {1172, 8, 4, 20, 65537} },	/* 19.2 MHz */
 	{20000000, {1000, 7, 4, 10, 0} },	/* 20 MHz */
 	{26000000, {1250, 12, 4, 20, 0} },	/* 26 MHz */
 	{38400000, {3125, 47, 4, 20, 92843} },	/* 38.4 MHz */
 	{ },					/* Terminator */
 };

 static struct pipe3_dpll_map dpll_map_sata[] = {
 	{12000000, {1000, 7, 4, 6, 0} },	/* 12 MHz */
 	{16800000, {714, 7, 4, 6, 0} },		/* 16.8 MHz */
 	{19200000, {625, 7, 4, 6, 0} },		/* 19.2 MHz */
 	{20000000, {600, 7, 4, 6, 0} },		/* 20 MHz */
 	{26000000, {461, 7, 4, 6, 0} },		/* 26 MHz */
 	{38400000, {312, 7, 4, 6, 0} },		/* 38.4 MHz */
 	{ },					/* Terminator */
 };

 static inline u32 ti_pipe3_readl(void __iomem *addr, unsigned offset)
 {
 	return __raw_readl(addr + offset);
 }

 static inline void ti_pipe3_writel(void __iomem *addr, unsigned offset,
 	u32 data)
 {
 	__raw_writel(data, addr + offset);
 }

 static struct pipe3_dpll_params *ti_pipe3_get_dpll_params(struct ti_pipe3 *phy)
 {
 	unsigned long rate;
 	struct pipe3_dpll_map *dpll_map = phy->dpll_map;

 	rate = clk_get_rate(phy->sys_clk);

 	for (; dpll_map->rate; dpll_map++) {
 		if (rate == dpll_map->rate)
 			return &dpll_map->params;
 	}

 	dev_err(phy->dev, "No DPLL configuration for %lu Hz SYS CLK\n", rate);

 	return NULL;
 }

 static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy);
 static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy);

 static int ti_pipe3_power_off(struct phy *x)
 {
 	struct ti_pipe3 *phy = phy_get_drvdata(x);

 	omap_control_phy_power(phy->control_dev, 0);

 	return 0;
 }

 static int ti_pipe3_power_on(struct phy *x)
 {
 	struct ti_pipe3 *phy = phy_get_drvdata(x);

 	omap_control_phy_power(phy->control_dev, 1);

 	return 0;
 }

 static int ti_pipe3_dpll_wait_lock(struct ti_pipe3 *phy)
 {
 	u32		val;
 	unsigned long	timeout;

 	timeout = jiffies + msecs_to_jiffies(PLL_LOCK_TIME);
 	do {
 		cpu_relax();
 		val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
 		if (val & PLL_LOCK)
 			return 0;
 	} while (!time_after(jiffies, timeout));

 	dev_err(phy->dev, "DPLL failed to lock\n");
 	return -EBUSY;
 }

 static int ti_pipe3_dpll_program(struct ti_pipe3 *phy)
 {
 	u32			val;
 	struct pipe3_dpll_params *dpll_params;

 	dpll_params = ti_pipe3_get_dpll_params(phy);
 	if (!dpll_params)
 		return -EINVAL;

 	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
 	val &= ~PLL_REGN_MASK;
 	val |= dpll_params->n << PLL_REGN_SHIFT;
 	ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);

 	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
 	val &= ~PLL_SELFREQDCO_MASK;
 	val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
 	ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);

 	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
 	val &= ~PLL_REGM_MASK;
 	val |= dpll_params->m << PLL_REGM_SHIFT;
 	ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);

 	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4);
 	val &= ~PLL_REGM_F_MASK;
 	val |= dpll_params->mf << PLL_REGM_F_SHIFT;
 	ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val);

 	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3);
 	val &= ~PLL_SD_MASK;
 	val |= dpll_params->sd << PLL_SD_SHIFT;
 	ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val);

 	ti_pipe3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO);

 	return ti_pipe3_dpll_wait_lock(phy);
 }

 static int ti_pipe3_init(struct phy *x)
 {
 	struct ti_pipe3 *phy = phy_get_drvdata(x);
 	u32 val;
 	int ret = 0;

 	ti_pipe3_enable_clocks(phy);
 	/*
 	 * Set pcie_pcs register to 0x96 for proper functioning of phy
 	 * as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table
 	 * 18-1804.
 	 */
 	if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
 		omap_control_pcie_pcs(phy->control_dev, 0x96);
 		return 0;
 	}

 	/* Bring it out of IDLE if it is IDLE */
 	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
 	if (val & PLL_IDLE) {
 		val &= ~PLL_IDLE;
 		ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
 		ret = ti_pipe3_dpll_wait_lock(phy);
 	}

 	/* Program the DPLL only if not locked */
 	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
 	if (!(val & PLL_LOCK))
 		if (ti_pipe3_dpll_program(phy))
 			return -EINVAL;

 	return ret;
 }

 static int ti_pipe3_exit(struct phy *x)
 {
 	struct ti_pipe3 *phy = phy_get_drvdata(x);
 	u32 val;
 	unsigned long timeout;

 	/* SATA DPLL can't be powered down due to Errata i783 */
 	if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata"))
 		return 0;

 	/* PCIe doesn't have internal DPLL */
 	if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
 		/* Put DPLL in IDLE mode */
 		val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
 		val |= PLL_IDLE;
 		ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);

 		/* wait for LDO and Oscillator to power down */
 		timeout = jiffies + msecs_to_jiffies(PLL_IDLE_TIME);
 		do {
 			cpu_relax();
 			val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
 			if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
 				break;
 		} while (!time_after(jiffies, timeout));

 		if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
 			dev_err(phy->dev, "Failed to power down: PLL_STATUS 0x%x\n",
 				val);
 			return -EBUSY;
 		}
 	}

 	ti_pipe3_disable_clocks(phy);

 	return 0;
 }
 static struct phy_ops ops = {
 	.init		= ti_pipe3_init,
 	.exit		= ti_pipe3_exit,
 	.power_on	= ti_pipe3_power_on,
 	.power_off	= ti_pipe3_power_off,
 	.owner		= THIS_MODULE,
 };

 static const struct of_device_id ti_pipe3_id_table[];

 static int ti_pipe3_probe(struct platform_device *pdev)
 {
 	struct ti_pipe3 *phy;
 	struct phy *generic_phy;
 	struct phy_provider *phy_provider;
 	struct resource *res;
 	struct device_node *node = pdev->dev.of_node;
 	struct device_node *control_node;
 	struct platform_device *control_pdev;
 	const struct of_device_id *match;
 	struct clk *clk;

 	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
 	if (!phy)
 		return -ENOMEM;

 	phy->dev		= &pdev->dev;

 	if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
 		match = of_match_device(ti_pipe3_id_table, &pdev->dev);
 		if (!match)
 			return -EINVAL;

 		phy->dpll_map = (struct pipe3_dpll_map *)match->data;
 		if (!phy->dpll_map) {
 			dev_err(&pdev->dev, "no DPLL data\n");
 			return -EINVAL;
 		}

 		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 						   "pll_ctrl");
 		phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res);
 		if (IS_ERR(phy->pll_ctrl_base))
 			return PTR_ERR(phy->pll_ctrl_base);

 		phy->sys_clk = devm_clk_get(phy->dev, "sysclk");
 		if (IS_ERR(phy->sys_clk)) {
 			dev_err(&pdev->dev, "unable to get sysclk\n");
 			return -EINVAL;
 		}
 	}

 	phy->refclk = devm_clk_get(phy->dev, "refclk");
 	if (IS_ERR(phy->refclk)) {
 		dev_err(&pdev->dev, "unable to get refclk\n");
 		/* older DTBs have missing refclk in SATA PHY
 		 * so don't bail out in case of SATA PHY.
 		 */
 		if (!of_device_is_compatible(node, "ti,phy-pipe3-sata"))
 			return PTR_ERR(phy->refclk);
 	}

 	if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
 		phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
 		if (IS_ERR(phy->wkupclk)) {
 			dev_err(&pdev->dev, "unable to get wkupclk\n");
 			return PTR_ERR(phy->wkupclk);
 		}
 	} else {
 		phy->wkupclk = ERR_PTR(-ENODEV);
 	}

 	if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {

 		clk = devm_clk_get(phy->dev, "dpll_ref");
 		if (IS_ERR(clk)) {
 			dev_err(&pdev->dev, "unable to get dpll ref clk\n");
 			return PTR_ERR(clk);
 		}
 		clk_set_rate(clk, 1500000000);

 		clk = devm_clk_get(phy->dev, "dpll_ref_m2");
 		if (IS_ERR(clk)) {
 			dev_err(&pdev->dev, "unable to get dpll ref m2 clk\n");
 			return PTR_ERR(clk);
 		}
 		clk_set_rate(clk, 100000000);

 		clk = devm_clk_get(phy->dev, "phy-div");
 		if (IS_ERR(clk)) {
 			dev_err(&pdev->dev, "unable to get phy-div clk\n");
 			return PTR_ERR(clk);
 		}
 		clk_set_rate(clk, 100000000);

 		phy->div_clk = devm_clk_get(phy->dev, "div-clk");
 		if (IS_ERR(phy->div_clk)) {
 			dev_err(&pdev->dev, "unable to get div-clk\n");
 			return PTR_ERR(phy->div_clk);
 		}
 	} else {
 		phy->div_clk = ERR_PTR(-ENODEV);
 	}

 	control_node = of_parse_phandle(node, "ctrl-module", 0);
 	if (!control_node) {
 		dev_err(&pdev->dev, "Failed to get control device phandle\n");
 		return -EINVAL;
 	}

 	control_pdev = of_find_device_by_node(control_node);
 	if (!control_pdev) {
 		dev_err(&pdev->dev, "Failed to get control device\n");
 		return -EINVAL;
 	}

 	phy->control_dev = &control_pdev->dev;

 	omap_control_phy_power(phy->control_dev, 0);

 	platform_set_drvdata(pdev, phy);
 	pm_runtime_enable(phy->dev);
 	/* Prevent auto-disable of refclk for SATA PHY due to Errata i783 */
 	if (of_device_is_compatible(node, "ti,phy-pipe3-sata"))
 		if (!IS_ERR(phy->refclk))
 			clk_prepare_enable(phy->refclk);

 	generic_phy = devm_phy_create(phy->dev, NULL, &ops);
 	if (IS_ERR(generic_phy))
 		return PTR_ERR(generic_phy);

 	phy_set_drvdata(generic_phy, phy);
 	phy_provider = devm_of_phy_provider_register(phy->dev,
 			of_phy_simple_xlate);
 	if (IS_ERR(phy_provider))
 		return PTR_ERR(phy_provider);

 	return 0;
 }

 static int ti_pipe3_remove(struct platform_device *pdev)
 {
 	pm_runtime_disable(&pdev->dev);

 	return 0;
 }

 static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
 {
 	int ret = 0;

 	if (!IS_ERR(phy->refclk)) {
 		ret = clk_prepare_enable(phy->refclk);
 		if (ret) {
 			dev_err(phy->dev, "Failed to enable refclk %d\n", ret);
 			return ret;
 		}
 	}

 	if (!IS_ERR(phy->wkupclk)) {
 		ret = clk_prepare_enable(phy->wkupclk);
 		if (ret) {
 			dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
 			goto disable_refclk;
 		}
 	}

 	if (!IS_ERR(phy->div_clk)) {
 		ret = clk_prepare_enable(phy->div_clk);
 		if (ret) {
 			dev_err(phy->dev, "Failed to enable div_clk %d\n", ret);
 			goto disable_wkupclk;
 		}
 	}

 	return 0;

 disable_wkupclk:
 	if (!IS_ERR(phy->wkupclk))
 		clk_disable_unprepare(phy->wkupclk);

 disable_refclk:
 	if (!IS_ERR(phy->refclk))
 		clk_disable_unprepare(phy->refclk);

 	return ret;
 }

 static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy)
 {
 	if (!IS_ERR(phy->wkupclk))
 		clk_disable_unprepare(phy->wkupclk);
 	if (!IS_ERR(phy->refclk))
 		clk_disable_unprepare(phy->refclk);
 	if (!IS_ERR(phy->div_clk))
 		clk_disable_unprepare(phy->div_clk);
 }

 static const struct of_device_id ti_pipe3_id_table[] = {
 	{
 		.compatible = "ti,phy-usb3",
 		.data = dpll_map_usb,
 	},
 	{
 		.compatible = "ti,omap-usb3",
 		.data = dpll_map_usb,
 	},
 	{
 		.compatible = "ti,phy-pipe3-sata",
 		.data = dpll_map_sata,
 	},
 	{
 		.compatible = "ti,phy-pipe3-pcie",
 	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, ti_pipe3_id_table);

 static struct platform_driver ti_pipe3_driver = {
 	.probe		= ti_pipe3_probe,
 	.remove		= ti_pipe3_remove,
 	.driver		= {
 		.name	= "ti-pipe3",
 		.of_match_table = ti_pipe3_id_table,
 	},
 };

 module_platform_driver(ti_pipe3_driver);

 MODULE_ALIAS("platform:ti_pipe3");
 MODULE_AUTHOR("Texas Instruments Inc.");
 MODULE_DESCRIPTION("TI PIPE3 phy driver");
 MODULE_LICENSE("GPL v2");
	/*
	* phy-ti-pipe3 - PIPE3 PHY driver.
	*
	* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* Author: Kishon Vijay Abraham I <kishon@ti.com>
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	*/

	#include <linux/module.h>
	#include <linux/platform_device.h>
	#include <linux/slab.h>
	#include <linux/phy/phy.h>
	#include <linux/of.h>
	#include <linux/clk.h>
	#include <linux/err.h>
	#include <linux/io.h>
	#include <linux/pm_runtime.h>
	#include <linux/delay.h>
	#include <linux/phy/omap_control_phy.h>
	#include <linux/of_platform.h>

	#define PLL_STATUS 0x00000004
	#define PLL_GO 0x00000008
	#define PLL_CONFIGURATION1 0x0000000C
	#define PLL_CONFIGURATION2 0x00000010
	#define PLL_CONFIGURATION3 0x00000014
	#define PLL_CONFIGURATION4 0x00000020

	#define PLL_REGM_MASK 0x001FFE00
	#define PLL_REGM_SHIFT 0x9
	#define PLL_REGM_F_MASK 0x0003FFFF
	#define PLL_REGM_F_SHIFT 0x0
	#define PLL_REGN_MASK 0x000001FE
	#define PLL_REGN_SHIFT 0x1
	#define PLL_SELFREQDCO_MASK 0x0000000E
	#define PLL_SELFREQDCO_SHIFT 0x1
	#define PLL_SD_MASK 0x0003FC00
	#define PLL_SD_SHIFT 10
	#define SET_PLL_GO 0x1
	#define PLL_LDOPWDN BIT(15)
	#define PLL_TICOPWDN BIT(16)
	#define PLL_LOCK 0x2
	#define PLL_IDLE 0x1

	/*
	* This is an Empirical value that works, need to confirm the actual
	* value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status
	* to be correctly reflected in the PIPE3PHY_PLL_STATUS register.
	*/
	#define PLL_IDLE_TIME 100 /* in milliseconds */
	#define PLL_LOCK_TIME 100 /* in milliseconds */

	struct pipe3_dpll_params {
	u16 m;
	u8 n;
	u8 freq:3;
	u8 sd;
	u32 mf;
	};

	struct pipe3_dpll_map {
	unsigned long rate;
	struct pipe3_dpll_params params;
	};

	struct ti_pipe3 {
	void __iomem *pll_ctrl_base;
	struct device *dev;
	struct device *control_dev;
	struct clk *wkupclk;
	struct clk *sys_clk;
	struct clk *refclk;
	struct clk *div_clk;
	struct pipe3_dpll_map *dpll_map;
	};

	static struct pipe3_dpll_map dpll_map_usb[] = {
	{12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */
	{16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */
	{19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */
	{20000000, {1000, 7, 4, 10, 0} }, /* 20 MHz */
	{26000000, {1250, 12, 4, 20, 0} }, /* 26 MHz */
	{38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */
	{ }, /* Terminator */
	};

	static struct pipe3_dpll_map dpll_map_sata[] = {
	{12000000, {1000, 7, 4, 6, 0} }, /* 12 MHz */
	{16800000, {714, 7, 4, 6, 0} }, /* 16.8 MHz */
	{19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */
	{20000000, {600, 7, 4, 6, 0} }, /* 20 MHz */
	{26000000, {461, 7, 4, 6, 0} }, /* 26 MHz */
	{38400000, {312, 7, 4, 6, 0} }, /* 38.4 MHz */
	{ }, /* Terminator */
	};

	static inline u32 ti_pipe3_readl(void __iomem *addr, unsigned offset)
	{
	return __raw_readl(addr + offset);
	}

	static inline void ti_pipe3_writel(void __iomem *addr, unsigned offset,
	u32 data)
	{
	__raw_writel(data, addr + offset);
	}

	static struct pipe3_dpll_params ti_pipe3_get_dpll_params(struct ti_pipe3 phy)
	{
	unsigned long rate;
	struct pipe3_dpll_map *dpll_map = phy->dpll_map;

	rate = clk_get_rate(phy->sys_clk);

	for (; dpll_map->rate; dpll_map++) {
	if (rate == dpll_map->rate)
	return &dpll_map->params;
	}

	dev_err(phy->dev, "No DPLL configuration for %lu Hz SYS CLK\n", rate);

	return NULL;
	}

	static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy);
	static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy);

	static int ti_pipe3_power_off(struct phy *x)
	{
	struct ti_pipe3 *phy = phy_get_drvdata(x);

	omap_control_phy_power(phy->control_dev, 0);

	return 0;
	}

	static int ti_pipe3_power_on(struct phy *x)
	{
	struct ti_pipe3 *phy = phy_get_drvdata(x);

	omap_control_phy_power(phy->control_dev, 1);

	return 0;
	}

	static int ti_pipe3_dpll_wait_lock(struct ti_pipe3 *phy)
	{
	u32 val;
	unsigned long timeout;

	timeout = jiffies + msecs_to_jiffies(PLL_LOCK_TIME);
	do {
	cpu_relax();
	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
	if (val & PLL_LOCK)
	return 0;
	} while (!time_after(jiffies, timeout));

	dev_err(phy->dev, "DPLL failed to lock\n");
	return -EBUSY;
	}

	static int ti_pipe3_dpll_program(struct ti_pipe3 *phy)
	{
	u32 val;
	struct pipe3_dpll_params *dpll_params;

	dpll_params = ti_pipe3_get_dpll_params(phy);
	if (!dpll_params)
	return -EINVAL;

	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
	val &= ~PLL_REGN_MASK;
	val \|= dpll_params->n << PLL_REGN_SHIFT;
	ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);

	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
	val &= ~PLL_SELFREQDCO_MASK;
	val \|= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
	ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);

	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
	val &= ~PLL_REGM_MASK;
	val \|= dpll_params->m << PLL_REGM_SHIFT;
	ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);

	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4);
	val &= ~PLL_REGM_F_MASK;
	val \|= dpll_params->mf << PLL_REGM_F_SHIFT;
	ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val);

	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3);
	val &= ~PLL_SD_MASK;
	val \|= dpll_params->sd << PLL_SD_SHIFT;
	ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val);

	ti_pipe3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO);

	return ti_pipe3_dpll_wait_lock(phy);
	}

	static int ti_pipe3_init(struct phy *x)
	{
	struct ti_pipe3 *phy = phy_get_drvdata(x);
	u32 val;
	int ret = 0;

	ti_pipe3_enable_clocks(phy);
	/*
	* Set pcie_pcs register to 0x96 for proper functioning of phy
	* as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table
	* 18-1804.
	*/
	if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
	omap_control_pcie_pcs(phy->control_dev, 0x96);
	return 0;
	}

	/* Bring it out of IDLE if it is IDLE */
	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
	if (val & PLL_IDLE) {
	val &= ~PLL_IDLE;
	ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
	ret = ti_pipe3_dpll_wait_lock(phy);
	}

	/* Program the DPLL only if not locked */
	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
	if (!(val & PLL_LOCK))
	if (ti_pipe3_dpll_program(phy))
	return -EINVAL;

	return ret;
	}

	static int ti_pipe3_exit(struct phy *x)
	{
	struct ti_pipe3 *phy = phy_get_drvdata(x);
	u32 val;
	unsigned long timeout;

	/* SATA DPLL can't be powered down due to Errata i783 */
	if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata"))
	return 0;

	/* PCIe doesn't have internal DPLL */
	if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
	/* Put DPLL in IDLE mode */
	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
	val \|= PLL_IDLE;
	ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);

	/* wait for LDO and Oscillator to power down */
	timeout = jiffies + msecs_to_jiffies(PLL_IDLE_TIME);
	do {
	cpu_relax();
	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
	if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
	break;
	} while (!time_after(jiffies, timeout));

	if (!(val & PLL_TICOPWDN) \|\| !(val & PLL_LDOPWDN)) {
	dev_err(phy->dev, "Failed to power down: PLL_STATUS 0x%x\n",
	val);
	return -EBUSY;
	}
	}

	ti_pipe3_disable_clocks(phy);

	return 0;
	}
	static struct phy_ops ops = {
	.init = ti_pipe3_init,
	.exit = ti_pipe3_exit,
	.power_on = ti_pipe3_power_on,
	.power_off = ti_pipe3_power_off,
	.owner = THIS_MODULE,
	};

	static const struct of_device_id ti_pipe3_id_table[];

	static int ti_pipe3_probe(struct platform_device *pdev)
	{
	struct ti_pipe3 *phy;
	struct phy *generic_phy;
	struct phy_provider *phy_provider;
	struct resource *res;
	struct device_node *node = pdev->dev.of_node;
	struct device_node *control_node;
	struct platform_device *control_pdev;
	const struct of_device_id *match;
	struct clk *clk;

	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
	if (!phy)
	return -ENOMEM;

	phy->dev = &pdev->dev;

	if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
	match = of_match_device(ti_pipe3_id_table, &pdev->dev);
	if (!match)
	return -EINVAL;

	phy->dpll_map = (struct pipe3_dpll_map *)match->data;
	if (!phy->dpll_map) {
	dev_err(&pdev->dev, "no DPLL data\n");
	return -EINVAL;
	}

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
	"pll_ctrl");
	phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(phy->pll_ctrl_base))
	return PTR_ERR(phy->pll_ctrl_base);

	phy->sys_clk = devm_clk_get(phy->dev, "sysclk");
	if (IS_ERR(phy->sys_clk)) {
	dev_err(&pdev->dev, "unable to get sysclk\n");
	return -EINVAL;
	}
	}

	phy->refclk = devm_clk_get(phy->dev, "refclk");
	if (IS_ERR(phy->refclk)) {
	dev_err(&pdev->dev, "unable to get refclk\n");
	/* older DTBs have missing refclk in SATA PHY
	* so don't bail out in case of SATA PHY.
	*/
	if (!of_device_is_compatible(node, "ti,phy-pipe3-sata"))
	return PTR_ERR(phy->refclk);
	}

	if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
	phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
	if (IS_ERR(phy->wkupclk)) {
	dev_err(&pdev->dev, "unable to get wkupclk\n");
	return PTR_ERR(phy->wkupclk);
	}
	} else {
	phy->wkupclk = ERR_PTR(-ENODEV);
	}

	if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {

	clk = devm_clk_get(phy->dev, "dpll_ref");
	if (IS_ERR(clk)) {
	dev_err(&pdev->dev, "unable to get dpll ref clk\n");
	return PTR_ERR(clk);
	}
	clk_set_rate(clk, 1500000000);

	clk = devm_clk_get(phy->dev, "dpll_ref_m2");
	if (IS_ERR(clk)) {
	dev_err(&pdev->dev, "unable to get dpll ref m2 clk\n");
	return PTR_ERR(clk);
	}
	clk_set_rate(clk, 100000000);

	clk = devm_clk_get(phy->dev, "phy-div");
	if (IS_ERR(clk)) {
	dev_err(&pdev->dev, "unable to get phy-div clk\n");
	return PTR_ERR(clk);
	}
	clk_set_rate(clk, 100000000);

	phy->div_clk = devm_clk_get(phy->dev, "div-clk");
	if (IS_ERR(phy->div_clk)) {
	dev_err(&pdev->dev, "unable to get div-clk\n");
	return PTR_ERR(phy->div_clk);
	}
	} else {
	phy->div_clk = ERR_PTR(-ENODEV);
	}

	control_node = of_parse_phandle(node, "ctrl-module", 0);
	if (!control_node) {
	dev_err(&pdev->dev, "Failed to get control device phandle\n");
	return -EINVAL;
	}

	control_pdev = of_find_device_by_node(control_node);
	if (!control_pdev) {
	dev_err(&pdev->dev, "Failed to get control device\n");
	return -EINVAL;
	}

	phy->control_dev = &control_pdev->dev;

	omap_control_phy_power(phy->control_dev, 0);

	platform_set_drvdata(pdev, phy);
	pm_runtime_enable(phy->dev);
	/* Prevent auto-disable of refclk for SATA PHY due to Errata i783 */
	if (of_device_is_compatible(node, "ti,phy-pipe3-sata"))
	if (!IS_ERR(phy->refclk))
	clk_prepare_enable(phy->refclk);

	generic_phy = devm_phy_create(phy->dev, NULL, &ops);
	if (IS_ERR(generic_phy))
	return PTR_ERR(generic_phy);

	phy_set_drvdata(generic_phy, phy);
	phy_provider = devm_of_phy_provider_register(phy->dev,
	of_phy_simple_xlate);
	if (IS_ERR(phy_provider))
	return PTR_ERR(phy_provider);

	return 0;
	}

	static int ti_pipe3_remove(struct platform_device *pdev)
	{
	pm_runtime_disable(&pdev->dev);

	return 0;
	}

	static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
	{
	int ret = 0;

	if (!IS_ERR(phy->refclk)) {
	ret = clk_prepare_enable(phy->refclk);
	if (ret) {
	dev_err(phy->dev, "Failed to enable refclk %d\n", ret);
	return ret;
	}
	}

	if (!IS_ERR(phy->wkupclk)) {
	ret = clk_prepare_enable(phy->wkupclk);
	if (ret) {
	dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
	goto disable_refclk;
	}
	}

	if (!IS_ERR(phy->div_clk)) {
	ret = clk_prepare_enable(phy->div_clk);
	if (ret) {
	dev_err(phy->dev, "Failed to enable div_clk %d\n", ret);
	goto disable_wkupclk;
	}
	}

	return 0;

	disable_wkupclk:
	if (!IS_ERR(phy->wkupclk))
	clk_disable_unprepare(phy->wkupclk);

	disable_refclk:
	if (!IS_ERR(phy->refclk))
	clk_disable_unprepare(phy->refclk);

	return ret;
	}

	static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy)
	{
	if (!IS_ERR(phy->wkupclk))
	clk_disable_unprepare(phy->wkupclk);
	if (!IS_ERR(phy->refclk))
	clk_disable_unprepare(phy->refclk);
	if (!IS_ERR(phy->div_clk))
	clk_disable_unprepare(phy->div_clk);
	}

	static const struct of_device_id ti_pipe3_id_table[] = {
	{
	.compatible = "ti,phy-usb3",
	.data = dpll_map_usb,
	},
	{
	.compatible = "ti,omap-usb3",
	.data = dpll_map_usb,
	},
	{
	.compatible = "ti,phy-pipe3-sata",
	.data = dpll_map_sata,
	},
	{
	.compatible = "ti,phy-pipe3-pcie",
	},
	{}
	};
	MODULE_DEVICE_TABLE(of, ti_pipe3_id_table);

	static struct platform_driver ti_pipe3_driver = {
	.probe = ti_pipe3_probe,
	.remove = ti_pipe3_remove,
	.driver = {
	.name = "ti-pipe3",
	.of_match_table = ti_pipe3_id_table,
	},
	};

	module_platform_driver(ti_pipe3_driver);

	MODULE_ALIAS("platform:ti_pipe3");
	MODULE_AUTHOR("Texas Instruments Inc.");
	MODULE_DESCRIPTION("TI PIPE3 phy driver");
	MODULE_LICENSE("GPL v2");