| /* |
| * arch/arm/mach-imx/generic.c |
| * |
| * author: Sascha Hauer |
| * Created: april 20th, 2004 |
| * Copyright: Synertronixx GmbH |
| * |
| * Common code for i.MX machines |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| #include <linux/device.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <asm/arch/imxfb.h> |
| #include <asm/hardware.h> |
| #include <asm/arch/imx-regs.h> |
| |
| #include <asm/mach/map.h> |
| |
| void imx_gpio_mode(int gpio_mode) |
| { |
| unsigned int pin = gpio_mode & GPIO_PIN_MASK; |
| unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; |
| unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT; |
| unsigned int tmp; |
| |
| /* Pullup enable */ |
| if(gpio_mode & GPIO_PUEN) |
| PUEN(port) |= (1<<pin); |
| else |
| PUEN(port) &= ~(1<<pin); |
| |
| /* Data direction */ |
| if(gpio_mode & GPIO_OUT) |
| DDIR(port) |= 1<<pin; |
| else |
| DDIR(port) &= ~(1<<pin); |
| |
| /* Primary / alternate function */ |
| if(gpio_mode & GPIO_AF) |
| GPR(port) |= (1<<pin); |
| else |
| GPR(port) &= ~(1<<pin); |
| |
| /* use as gpio? */ |
| if(gpio_mode & GPIO_GIUS) |
| GIUS(port) |= (1<<pin); |
| else |
| GIUS(port) &= ~(1<<pin); |
| |
| /* Output / input configuration */ |
| /* FIXME: I'm not very sure about OCR and ICONF, someone |
| * should have a look over it |
| */ |
| if(pin<16) { |
| tmp = OCR1(port); |
| tmp &= ~( 3<<(pin*2)); |
| tmp |= (ocr << (pin*2)); |
| OCR1(port) = tmp; |
| |
| ICONFA1(port) &= ~( 3<<(pin*2)); |
| ICONFA1(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2); |
| ICONFB1(port) &= ~( 3<<(pin*2)); |
| ICONFB1(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2); |
| } else { |
| tmp = OCR2(port); |
| tmp &= ~( 3<<((pin-16)*2)); |
| tmp |= (ocr << ((pin-16)*2)); |
| OCR2(port) = tmp; |
| |
| ICONFA2(port) &= ~( 3<<((pin-16)*2)); |
| ICONFA2(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << ((pin-16) * 2); |
| ICONFB2(port) &= ~( 3<<((pin-16)*2)); |
| ICONFB2(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << ((pin-16) * 2); |
| } |
| } |
| |
| EXPORT_SYMBOL(imx_gpio_mode); |
| |
| /* |
| * get the system pll clock in Hz |
| * |
| * mfi + mfn / (mfd +1) |
| * f = 2 * f_ref * -------------------- |
| * pd + 1 |
| */ |
| static unsigned int imx_decode_pll(unsigned int pll) |
| { |
| u32 mfi = (pll >> 10) & 0xf; |
| u32 mfn = pll & 0x3ff; |
| u32 mfd = (pll >> 16) & 0x3ff; |
| u32 pd = (pll >> 26) & 0xf; |
| u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512); |
| |
| mfi = mfi <= 5 ? 5 : mfi; |
| |
| return (2 * (f_ref>>10) * ( (mfi<<10) + (mfn<<10) / (mfd+1) )) / (pd+1); |
| } |
| |
| unsigned int imx_get_system_clk(void) |
| { |
| return imx_decode_pll(SPCTL0); |
| } |
| EXPORT_SYMBOL(imx_get_system_clk); |
| |
| unsigned int imx_get_mcu_clk(void) |
| { |
| return imx_decode_pll(MPCTL0); |
| } |
| EXPORT_SYMBOL(imx_get_mcu_clk); |
| |
| /* |
| * get peripheral clock 1 ( UART[12], Timer[12], PWM ) |
| */ |
| unsigned int imx_get_perclk1(void) |
| { |
| return imx_get_system_clk() / (((PCDR) & 0xf)+1); |
| } |
| EXPORT_SYMBOL(imx_get_perclk1); |
| |
| /* |
| * get peripheral clock 2 ( LCD, SD, SPI[12] ) |
| */ |
| unsigned int imx_get_perclk2(void) |
| { |
| return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1); |
| } |
| EXPORT_SYMBOL(imx_get_perclk2); |
| |
| /* |
| * get peripheral clock 3 ( SSI ) |
| */ |
| unsigned int imx_get_perclk3(void) |
| { |
| return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1); |
| } |
| EXPORT_SYMBOL(imx_get_perclk3); |
| |
| /* |
| * get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA ) |
| */ |
| unsigned int imx_get_hclk(void) |
| { |
| return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1); |
| } |
| EXPORT_SYMBOL(imx_get_hclk); |
| |
| static struct resource imx_mmc_resources[] = { |
| [0] = { |
| .start = 0x00214000, |
| .end = 0x002140FF, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = (SDHC_INT), |
| .end = (SDHC_INT), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device imx_mmc_device = { |
| .name = "imx-mmc", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(imx_mmc_resources), |
| .resource = imx_mmc_resources, |
| }; |
| |
| static struct resource imx_uart1_resources[] = { |
| [0] = { |
| .start = 0x00206000, |
| .end = 0x002060FF, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = (UART1_MINT_RX), |
| .end = (UART1_MINT_RX), |
| .flags = IORESOURCE_IRQ, |
| }, |
| [2] = { |
| .start = (UART1_MINT_TX), |
| .end = (UART1_MINT_TX), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device imx_uart1_device = { |
| .name = "imx-uart", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(imx_uart1_resources), |
| .resource = imx_uart1_resources, |
| }; |
| |
| static struct resource imx_uart2_resources[] = { |
| [0] = { |
| .start = 0x00207000, |
| .end = 0x002070FF, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = (UART2_MINT_RX), |
| .end = (UART2_MINT_RX), |
| .flags = IORESOURCE_IRQ, |
| }, |
| [2] = { |
| .start = (UART2_MINT_TX), |
| .end = (UART2_MINT_TX), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device imx_uart2_device = { |
| .name = "imx-uart", |
| .id = 1, |
| .num_resources = ARRAY_SIZE(imx_uart2_resources), |
| .resource = imx_uart2_resources, |
| }; |
| |
| static struct imxfb_mach_info imx_fb_info; |
| |
| void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info) |
| { |
| memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imxfb_mach_info)); |
| } |
| EXPORT_SYMBOL(set_imx_fb_info); |
| |
| static struct resource imxfb_resources[] = { |
| [0] = { |
| .start = 0x00205000, |
| .end = 0x002050FF, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = LCDC_INT, |
| .end = LCDC_INT, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static u64 fb_dma_mask = ~(u64)0; |
| |
| static struct platform_device imxfb_device = { |
| .name = "imx-fb", |
| .id = 0, |
| .dev = { |
| .platform_data = &imx_fb_info, |
| .dma_mask = &fb_dma_mask, |
| .coherent_dma_mask = 0xffffffff, |
| }, |
| .num_resources = ARRAY_SIZE(imxfb_resources), |
| .resource = imxfb_resources, |
| }; |
| |
| static struct platform_device *devices[] __initdata = { |
| &imx_mmc_device, |
| &imxfb_device, |
| &imx_uart1_device, |
| &imx_uart2_device, |
| }; |
| |
| static struct map_desc imx_io_desc[] __initdata = { |
| { |
| .virtual = IMX_IO_BASE, |
| .pfn = __phys_to_pfn(IMX_IO_PHYS), |
| .length = IMX_IO_SIZE, |
| .type = MT_DEVICE |
| } |
| }; |
| |
| void __init |
| imx_map_io(void) |
| { |
| iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc)); |
| } |
| |
| static int __init imx_init(void) |
| { |
| return platform_add_devices(devices, ARRAY_SIZE(devices)); |
| } |
| |
| subsys_initcall(imx_init); |