[SCSI] lpfc 8.3.31: Correct handling of SLI4-port XRI resource-provisioning profile change

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 330dd71..620fa45 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -460,6 +460,7 @@
 int lpfc_issue_reg_vfi(struct lpfc_vport *);
 int lpfc_issue_unreg_vfi(struct lpfc_vport *);
 int lpfc_selective_reset(struct lpfc_hba *);
-int lpfc_sli4_read_config(struct lpfc_hba *phba);
-int lpfc_scsi_buf_update(struct lpfc_hba *phba);
-void lpfc_sli4_node_prep(struct lpfc_hba *phba);
+int lpfc_sli4_read_config(struct lpfc_hba *);
+void lpfc_sli4_node_prep(struct lpfc_hba *);
+int lpfc_sli4_xri_sgl_update(struct lpfc_hba *);
+void lpfc_free_sgl_list(struct lpfc_hba *, struct list_head *);
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 91f0976..24344c1 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -228,19 +228,15 @@
 #define lpfc_idx_rsrc_rdy_MASK		0x00000001
 #define lpfc_idx_rsrc_rdy_WORD		word0
 #define LPFC_IDX_RSRC_RDY		1
-#define lpfc_xri_rsrc_rdy_SHIFT		1
-#define lpfc_xri_rsrc_rdy_MASK		0x00000001
-#define lpfc_xri_rsrc_rdy_WORD		word0
-#define LPFC_XRI_RSRC_RDY		1
-#define lpfc_rpi_rsrc_rdy_SHIFT		2
+#define lpfc_rpi_rsrc_rdy_SHIFT		1
 #define lpfc_rpi_rsrc_rdy_MASK		0x00000001
 #define lpfc_rpi_rsrc_rdy_WORD		word0
 #define LPFC_RPI_RSRC_RDY		1
-#define lpfc_vpi_rsrc_rdy_SHIFT		3
+#define lpfc_vpi_rsrc_rdy_SHIFT		2
 #define lpfc_vpi_rsrc_rdy_MASK		0x00000001
 #define lpfc_vpi_rsrc_rdy_WORD		word0
 #define LPFC_VPI_RSRC_RDY		1
-#define lpfc_vfi_rsrc_rdy_SHIFT		4
+#define lpfc_vfi_rsrc_rdy_SHIFT		3
 #define lpfc_vfi_rsrc_rdy_MASK		0x00000001
 #define lpfc_vfi_rsrc_rdy_WORD		word0
 #define LPFC_VFI_RSRC_RDY		1
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 5538cd0..411ed48 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -64,8 +64,8 @@
 static int lpfc_create_bootstrap_mbox(struct lpfc_hba *);
 static int lpfc_setup_endian_order(struct lpfc_hba *);
 static void lpfc_destroy_bootstrap_mbox(struct lpfc_hba *);
-static void lpfc_free_sgl_list(struct lpfc_hba *);
-static int lpfc_init_sgl_list(struct lpfc_hba *);
+static void lpfc_free_els_sgl_list(struct lpfc_hba *);
+static void lpfc_init_sgl_list(struct lpfc_hba *);
 static int lpfc_init_active_sgl_array(struct lpfc_hba *);
 static void lpfc_free_active_sgl(struct lpfc_hba *);
 static int lpfc_hba_down_post_s3(struct lpfc_hba *phba);
@@ -2767,47 +2767,14 @@
 }
 
 /**
- * lpfc_scsi_buf_update - Update the scsi_buffers that are already allocated.
- * @phba: pointer to lpfc hba data structure.
- *
- * This routine goes through all the scsi buffers in the system and updates the
- * Physical XRIs assigned to the SCSI buffer because these may change after any
- * firmware reset
- *
- * Return codes
- *   0 - successful (for now, it always returns 0)
- **/
-int
-lpfc_scsi_buf_update(struct lpfc_hba *phba)
-{
-	struct lpfc_scsi_buf *sb, *sb_next;
-
-	spin_lock_irq(&phba->hbalock);
-	spin_lock(&phba->scsi_buf_list_lock);
-	list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list) {
-		sb->cur_iocbq.sli4_xritag =
-			phba->sli4_hba.xri_ids[sb->cur_iocbq.sli4_lxritag];
-		set_bit(sb->cur_iocbq.sli4_lxritag, phba->sli4_hba.xri_bmask);
-		phba->sli4_hba.max_cfg_param.xri_used++;
-		phba->sli4_hba.xri_count++;
-	}
-	spin_unlock(&phba->scsi_buf_list_lock);
-	spin_unlock_irq(&phba->hbalock);
-	return 0;
-}
-
-/**
  * lpfc_scsi_free - Free all the SCSI buffers and IOCBs from driver lists
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is to free all the SCSI buffers and IOCBs from the driver
  * list back to kernel. It is called from lpfc_pci_remove_one to free
  * the internal resources before the device is removed from the system.
- *
- * Return codes
- *   0 - successful (for now, it always returns 0)
  **/
-static int
+static void
 lpfc_scsi_free(struct lpfc_hba *phba)
 {
 	struct lpfc_scsi_buf *sb, *sb_next;
@@ -2833,7 +2800,178 @@
 	}
 
 	spin_unlock_irq(&phba->hbalock);
+}
+
+/**
+ * lpfc_sli4_xri_sgl_update - update xri-sgl sizing and mapping
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine first calculates the sizes of the current els and allocated
+ * scsi sgl lists, and then goes through all sgls to updates the physical
+ * XRIs assigned due to port function reset. During port initialization, the
+ * current els and allocated scsi sgl lists are 0s.
+ *
+ * Return codes
+ *   0 - successful (for now, it always returns 0)
+ **/
+int
+lpfc_sli4_xri_sgl_update(struct lpfc_hba *phba)
+{
+	struct lpfc_sglq *sglq_entry = NULL, *sglq_entry_next = NULL;
+	struct lpfc_scsi_buf *psb = NULL, *psb_next = NULL;
+	uint16_t i, lxri, xri_cnt, els_xri_cnt, scsi_xri_cnt;
+	LIST_HEAD(els_sgl_list);
+	LIST_HEAD(scsi_sgl_list);
+	int rc;
+
+	/*
+	 * update on pci function's els xri-sgl list
+	 */
+	els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
+	if (els_xri_cnt > phba->sli4_hba.els_xri_cnt) {
+		/* els xri-sgl expanded */
+		xri_cnt = els_xri_cnt - phba->sli4_hba.els_xri_cnt;
+		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"3157 ELS xri-sgl count increased from "
+				"%d to %d\n", phba->sli4_hba.els_xri_cnt,
+				els_xri_cnt);
+		/* allocate the additional els sgls */
+		for (i = 0; i < xri_cnt; i++) {
+			sglq_entry = kzalloc(sizeof(struct lpfc_sglq),
+					     GFP_KERNEL);
+			if (sglq_entry == NULL) {
+				lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+						"2562 Failure to allocate an "
+						"ELS sgl entry:%d\n", i);
+				rc = -ENOMEM;
+				goto out_free_mem;
+			}
+			sglq_entry->buff_type = GEN_BUFF_TYPE;
+			sglq_entry->virt = lpfc_mbuf_alloc(phba, 0,
+							   &sglq_entry->phys);
+			if (sglq_entry->virt == NULL) {
+				kfree(sglq_entry);
+				lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+						"2563 Failure to allocate an "
+						"ELS mbuf:%d\n", i);
+				rc = -ENOMEM;
+				goto out_free_mem;
+			}
+			sglq_entry->sgl = sglq_entry->virt;
+			memset(sglq_entry->sgl, 0, LPFC_BPL_SIZE);
+			sglq_entry->state = SGL_FREED;
+			list_add_tail(&sglq_entry->list, &els_sgl_list);
+		}
+		spin_lock(&phba->hbalock);
+		list_splice_init(&els_sgl_list, &phba->sli4_hba.lpfc_sgl_list);
+		spin_unlock(&phba->hbalock);
+	} else if (els_xri_cnt < phba->sli4_hba.els_xri_cnt) {
+		/* els xri-sgl shrinked */
+		xri_cnt = phba->sli4_hba.els_xri_cnt - els_xri_cnt;
+		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"3158 ELS xri-sgl count decreased from "
+				"%d to %d\n", phba->sli4_hba.els_xri_cnt,
+				els_xri_cnt);
+		spin_lock_irq(&phba->hbalock);
+		list_splice_init(&phba->sli4_hba.lpfc_sgl_list, &els_sgl_list);
+		spin_unlock_irq(&phba->hbalock);
+		/* release extra els sgls from list */
+		for (i = 0; i < xri_cnt; i++) {
+			list_remove_head(&els_sgl_list,
+					 sglq_entry, struct lpfc_sglq, list);
+			if (sglq_entry) {
+				lpfc_mbuf_free(phba, sglq_entry->virt,
+					       sglq_entry->phys);
+				kfree(sglq_entry);
+			}
+		}
+		spin_lock_irq(&phba->hbalock);
+		list_splice_init(&els_sgl_list, &phba->sli4_hba.lpfc_sgl_list);
+		spin_unlock_irq(&phba->hbalock);
+	} else
+		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"3163 ELS xri-sgl count unchanged: %d\n",
+				els_xri_cnt);
+	phba->sli4_hba.els_xri_cnt = els_xri_cnt;
+
+	/* update xris to els sgls on the list */
+	sglq_entry = NULL;
+	sglq_entry_next = NULL;
+	list_for_each_entry_safe(sglq_entry, sglq_entry_next,
+				 &phba->sli4_hba.lpfc_sgl_list, list) {
+		lxri = lpfc_sli4_next_xritag(phba);
+		if (lxri == NO_XRI) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+					"2400 Failed to allocate xri for "
+					"ELS sgl\n");
+			rc = -ENOMEM;
+			goto out_free_mem;
+		}
+		sglq_entry->sli4_lxritag = lxri;
+		sglq_entry->sli4_xritag = phba->sli4_hba.xri_ids[lxri];
+	}
+
+	/*
+	 * update on pci function's allocated scsi xri-sgl list
+	 */
+	phba->total_scsi_bufs = 0;
+
+	/* maximum number of xris available for scsi buffers */
+	phba->sli4_hba.scsi_xri_max = phba->sli4_hba.max_cfg_param.max_xri -
+				      els_xri_cnt;
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"2401 Current allocated SCSI xri-sgl count:%d, "
+			"maximum  SCSI xri count:%d\n",
+			phba->sli4_hba.scsi_xri_cnt,
+			phba->sli4_hba.scsi_xri_max);
+
+	spin_lock_irq(&phba->scsi_buf_list_lock);
+	list_splice_init(&phba->lpfc_scsi_buf_list, &scsi_sgl_list);
+	spin_unlock_irq(&phba->scsi_buf_list_lock);
+
+	if (phba->sli4_hba.scsi_xri_cnt > phba->sli4_hba.scsi_xri_max) {
+		/* max scsi xri shrinked below the allocated scsi buffers */
+		scsi_xri_cnt = phba->sli4_hba.scsi_xri_cnt -
+					phba->sli4_hba.scsi_xri_max;
+		/* release the extra allocated scsi buffers */
+		for (i = 0; i < scsi_xri_cnt; i++) {
+			list_remove_head(&scsi_sgl_list, psb,
+					 struct lpfc_scsi_buf, list);
+			pci_pool_free(phba->lpfc_scsi_dma_buf_pool, psb->data,
+				      psb->dma_handle);
+			kfree(psb);
+		}
+		spin_lock_irq(&phba->scsi_buf_list_lock);
+		phba->sli4_hba.scsi_xri_cnt -= scsi_xri_cnt;
+		spin_unlock_irq(&phba->scsi_buf_list_lock);
+	}
+
+	/* update xris associated to remaining allocated scsi buffers */
+	psb = NULL;
+	psb_next = NULL;
+	list_for_each_entry_safe(psb, psb_next, &scsi_sgl_list, list) {
+		lxri = lpfc_sli4_next_xritag(phba);
+		if (lxri == NO_XRI) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+					"2560 Failed to allocate xri for "
+					"scsi buffer\n");
+			rc = -ENOMEM;
+			goto out_free_mem;
+		}
+		psb->cur_iocbq.sli4_lxritag = lxri;
+		psb->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri];
+	}
+	spin_lock(&phba->scsi_buf_list_lock);
+	list_splice_init(&scsi_sgl_list, &phba->lpfc_scsi_buf_list);
+	spin_unlock(&phba->scsi_buf_list_lock);
+
 	return 0;
+
+out_free_mem:
+	lpfc_free_els_sgl_list(phba);
+	lpfc_scsi_free(phba);
+	return rc;
 }
 
 /**
@@ -4636,18 +4774,15 @@
 	if (rc)
 		goto out_free_bsmbx;
 
-	/* Initialize and populate the iocb list per host */
-	rc = lpfc_init_sgl_list(phba);
-	if (rc) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-				"1400 Failed to initialize sgl list.\n");
-		goto out_destroy_cq_event_pool;
-	}
+	/* Initialize sgl lists per host */
+	lpfc_init_sgl_list(phba);
+
+	/* Allocate and initialize active sgl array */
 	rc = lpfc_init_active_sgl_array(phba);
 	if (rc) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"1430 Failed to initialize sgl list.\n");
-		goto out_free_sgl_list;
+		goto out_destroy_cq_event_pool;
 	}
 	rc = lpfc_sli4_init_rpi_hdrs(phba);
 	if (rc) {
@@ -4722,8 +4857,6 @@
 	lpfc_sli4_remove_rpi_hdrs(phba);
 out_free_active_sgl:
 	lpfc_free_active_sgl(phba);
-out_free_sgl_list:
-	lpfc_free_sgl_list(phba);
 out_destroy_cq_event_pool:
 	lpfc_sli4_cq_event_pool_destroy(phba);
 out_free_bsmbx:
@@ -4760,10 +4893,7 @@
 
 	/* Free the ELS sgl list */
 	lpfc_free_active_sgl(phba);
-	lpfc_free_sgl_list(phba);
-
-	/* Free the SCSI sgl management array */
-	kfree(phba->sli4_hba.lpfc_scsi_psb_array);
+	lpfc_free_els_sgl_list(phba);
 
 	/* Free the completion queue EQ event pool */
 	lpfc_sli4_cq_event_release_all(phba);
@@ -4990,29 +5120,42 @@
 }
 
 /**
- * lpfc_free_sgl_list - Free sgl list.
+ * lpfc_free_sgl_list - Free a given sgl list.
  * @phba: pointer to lpfc hba data structure.
+ * @sglq_list: pointer to the head of sgl list.
  *
- * This routine is invoked to free the driver's sgl list and memory.
+ * This routine is invoked to free a give sgl list and memory.
  **/
-static void
-lpfc_free_sgl_list(struct lpfc_hba *phba)
+void
+lpfc_free_sgl_list(struct lpfc_hba *phba, struct list_head *sglq_list)
 {
 	struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
+
+	list_for_each_entry_safe(sglq_entry, sglq_next, sglq_list, list) {
+		list_del(&sglq_entry->list);
+		lpfc_mbuf_free(phba, sglq_entry->virt, sglq_entry->phys);
+		kfree(sglq_entry);
+	}
+}
+
+/**
+ * lpfc_free_els_sgl_list - Free els sgl list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the driver's els sgl list and memory.
+ **/
+static void
+lpfc_free_els_sgl_list(struct lpfc_hba *phba)
+{
 	LIST_HEAD(sglq_list);
 
+	/* Retrieve all els sgls from driver list */
 	spin_lock_irq(&phba->hbalock);
 	list_splice_init(&phba->sli4_hba.lpfc_sgl_list, &sglq_list);
 	spin_unlock_irq(&phba->hbalock);
 
-	list_for_each_entry_safe(sglq_entry, sglq_next,
-				 &sglq_list, list) {
-		list_del(&sglq_entry->list);
-		lpfc_mbuf_free(phba, sglq_entry->virt, sglq_entry->phys);
-		kfree(sglq_entry);
-		phba->sli4_hba.total_sglq_bufs--;
-	}
-	kfree(phba->sli4_hba.lpfc_els_sgl_array);
+	/* Now free the sgl list */
+	lpfc_free_sgl_list(phba, &sglq_list);
 }
 
 /**
@@ -5057,99 +5200,19 @@
  * This routine is invoked to allocate and initizlize the driver's sgl
  * list and set up the sgl xritag tag array accordingly.
  *
- * Return codes
- *	0 - successful
- *	other values - error
  **/
-static int
+static void
 lpfc_init_sgl_list(struct lpfc_hba *phba)
 {
-	struct lpfc_sglq *sglq_entry = NULL;
-	int i;
-	int els_xri_cnt;
-
-	els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
-	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
-				"2400 ELS XRI count %d.\n",
-				els_xri_cnt);
 	/* Initialize and populate the sglq list per host/VF. */
 	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_sgl_list);
 	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_els_sgl_list);
 
-	/* Sanity check on XRI management */
-	if (phba->sli4_hba.max_cfg_param.max_xri <= els_xri_cnt) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
-				"2562 No room left for SCSI XRI allocation: "
-				"max_xri=%d, els_xri=%d\n",
-				phba->sli4_hba.max_cfg_param.max_xri,
-				els_xri_cnt);
-		return -ENOMEM;
-	}
+	/* els xri-sgl book keeping */
+	phba->sli4_hba.els_xri_cnt = 0;
 
-	/* Allocate memory for the ELS XRI management array */
-	phba->sli4_hba.lpfc_els_sgl_array =
-			kzalloc((sizeof(struct lpfc_sglq *) * els_xri_cnt),
-			GFP_KERNEL);
-
-	if (!phba->sli4_hba.lpfc_els_sgl_array) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
-				"2401 Failed to allocate memory for ELS "
-				"XRI management array of size %d.\n",
-				els_xri_cnt);
-		return -ENOMEM;
-	}
-
-	/* Keep the SCSI XRI into the XRI management array */
-	phba->sli4_hba.scsi_xri_max =
-			phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt;
+	/* scsi xri-buffer book keeping */
 	phba->sli4_hba.scsi_xri_cnt = 0;
-	phba->sli4_hba.lpfc_scsi_psb_array =
-			kzalloc((sizeof(struct lpfc_scsi_buf *) *
-			phba->sli4_hba.scsi_xri_max), GFP_KERNEL);
-
-	if (!phba->sli4_hba.lpfc_scsi_psb_array) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
-				"2563 Failed to allocate memory for SCSI "
-				"XRI management array of size %d.\n",
-				phba->sli4_hba.scsi_xri_max);
-		kfree(phba->sli4_hba.lpfc_els_sgl_array);
-		return -ENOMEM;
-	}
-
-	for (i = 0; i < els_xri_cnt; i++) {
-		sglq_entry = kzalloc(sizeof(struct lpfc_sglq), GFP_KERNEL);
-		if (sglq_entry == NULL) {
-			printk(KERN_ERR "%s: only allocated %d sgls of "
-				"expected %d count. Unloading driver.\n",
-				__func__, i, els_xri_cnt);
-			goto out_free_mem;
-		}
-
-		sglq_entry->buff_type = GEN_BUFF_TYPE;
-		sglq_entry->virt = lpfc_mbuf_alloc(phba, 0, &sglq_entry->phys);
-		if (sglq_entry->virt == NULL) {
-			kfree(sglq_entry);
-			printk(KERN_ERR "%s: failed to allocate mbuf.\n"
-				"Unloading driver.\n", __func__);
-			goto out_free_mem;
-		}
-		sglq_entry->sgl = sglq_entry->virt;
-		memset(sglq_entry->sgl, 0, LPFC_BPL_SIZE);
-
-		/* The list order is used by later block SGL registraton */
-		spin_lock_irq(&phba->hbalock);
-		sglq_entry->state = SGL_FREED;
-		list_add_tail(&sglq_entry->list, &phba->sli4_hba.lpfc_sgl_list);
-		phba->sli4_hba.lpfc_els_sgl_array[i] = sglq_entry;
-		phba->sli4_hba.total_sglq_bufs++;
-		spin_unlock_irq(&phba->hbalock);
-	}
-	return 0;
-
-out_free_mem:
-	kfree(phba->sli4_hba.lpfc_scsi_psb_array);
-	lpfc_free_sgl_list(phba);
-	return -ENOMEM;
 }
 
 /**
@@ -7320,9 +7383,11 @@
 					phba->sli4_hba.u.if_type2.ERR2regaddr);
 				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 					"2890 Port error detected during port "
-					"reset(%d): port status reg 0x%x, "
+					"reset(%d): wait_tmo:%d ms, "
+					"port status reg 0x%x, "
 					"error 1=0x%x, error 2=0x%x\n",
-					num_resets, reg_data.word0,
+					num_resets, rdy_chk*10,
+					reg_data.word0,
 					phba->work_status[0],
 					phba->work_status[1]);
 				rc = -ENODEV;
@@ -9118,8 +9183,12 @@
 			return 50;
 		else if (max_xri <= 1024)
 			return 100;
-		else
+		else if (max_xri <= 1536)
 			return 150;
+		else if (max_xri <= 2048)
+			return 200;
+		else
+			return 250;
 	} else
 		return 0;
 }
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 88f3a83..bf0048a 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -718,11 +718,137 @@
 }
 
 /**
- * lpfc_sli4_repost_scsi_sgl_list - Repsot the Scsi buffers sgl pages as block
+ * lpfc_sli4_post_scsi_sgl_list - Psot blocks of scsi buffer sgls from a list
+ * @phba: pointer to lpfc hba data structure.
+ * @post_sblist: pointer to the scsi buffer list.
+ *
+ * This routine walks a list of scsi buffers that was passed in. It attempts
+ * to construct blocks of scsi buffer sgls which contains contiguous xris and
+ * uses the non-embedded SGL block post mailbox commands to post to the port.
+ * For single SCSI buffer sgl with non-contiguous xri, if any, it shall use
+ * embedded SGL post mailbox command for posting. The @post_sblist passed in
+ * must be local list, thus no lock is needed when manipulate the list.
+ *
+ * Returns: 0 = failure, non-zero number of successfully posted buffers.
+ **/
+int
+lpfc_sli4_post_scsi_sgl_list(struct lpfc_hba *phba,
+			     struct list_head *post_sblist, int sb_count)
+{
+	struct lpfc_scsi_buf *psb, *psb_next;
+	int status;
+	int post_cnt = 0, block_cnt = 0, num_posting = 0, num_posted = 0;
+	dma_addr_t pdma_phys_bpl1;
+	int last_xritag = NO_XRI;
+	LIST_HEAD(prep_sblist);
+	LIST_HEAD(blck_sblist);
+	LIST_HEAD(scsi_sblist);
+
+	/* sanity check */
+	if (sb_count <= 0)
+		return -EINVAL;
+
+	list_for_each_entry_safe(psb, psb_next, post_sblist, list) {
+		list_del_init(&psb->list);
+		block_cnt++;
+		if ((last_xritag != NO_XRI) &&
+		    (psb->cur_iocbq.sli4_xritag != last_xritag + 1)) {
+			/* a hole in xri block, form a sgl posting block */
+			list_splice_init(&prep_sblist, &blck_sblist);
+			post_cnt = block_cnt - 1;
+			/* prepare list for next posting block */
+			list_add_tail(&psb->list, &prep_sblist);
+			block_cnt = 1;
+		} else {
+			/* prepare list for next posting block */
+			list_add_tail(&psb->list, &prep_sblist);
+			/* enough sgls for non-embed sgl mbox command */
+			if (block_cnt == LPFC_NEMBED_MBOX_SGL_CNT) {
+				list_splice_init(&prep_sblist, &blck_sblist);
+				post_cnt = block_cnt;
+				block_cnt = 0;
+			}
+		}
+		num_posting++;
+		last_xritag = psb->cur_iocbq.sli4_xritag;
+
+		/* end of repost sgl list condition for SCSI buffers */
+		if (num_posting == sb_count) {
+			if (post_cnt == 0) {
+				/* last sgl posting block */
+				list_splice_init(&prep_sblist, &blck_sblist);
+				post_cnt = block_cnt;
+			} else if (block_cnt == 1) {
+				/* last single sgl with non-contiguous xri */
+				if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
+					pdma_phys_bpl1 = psb->dma_phys_bpl +
+								SGL_PAGE_SIZE;
+				else
+					pdma_phys_bpl1 = 0;
+				status = lpfc_sli4_post_sgl(phba,
+						psb->dma_phys_bpl,
+						pdma_phys_bpl1,
+						psb->cur_iocbq.sli4_xritag);
+				if (status) {
+					/* failure, put on abort scsi list */
+					psb->exch_busy = 1;
+				} else {
+					/* success, put on SCSI buffer list */
+					psb->exch_busy = 0;
+					psb->status = IOSTAT_SUCCESS;
+					num_posted++;
+				}
+				/* success, put on SCSI buffer sgl list */
+				list_add_tail(&psb->list, &scsi_sblist);
+			}
+		}
+
+		/* continue until a nembed page worth of sgls */
+		if (post_cnt == 0)
+			continue;
+
+		/* post block of SCSI buffer list sgls */
+		status = lpfc_sli4_post_scsi_sgl_block(phba, &blck_sblist,
+						       post_cnt);
+
+		/* don't reset xirtag due to hole in xri block */
+		if (block_cnt == 0)
+			last_xritag = NO_XRI;
+
+		/* reset SCSI buffer post count for next round of posting */
+		post_cnt = 0;
+
+		/* put posted SCSI buffer-sgl posted on SCSI buffer sgl list */
+		while (!list_empty(&blck_sblist)) {
+			list_remove_head(&blck_sblist, psb,
+					 struct lpfc_scsi_buf, list);
+			if (status) {
+				/* failure, put on abort scsi list */
+				psb->exch_busy = 1;
+			} else {
+				/* success, put on SCSI buffer list */
+				psb->exch_busy = 0;
+				psb->status = IOSTAT_SUCCESS;
+				num_posted++;
+			}
+			list_add_tail(&psb->list, &scsi_sblist);
+		}
+	}
+	/* Push SCSI buffers with sgl posted to the availble list */
+	while (!list_empty(&scsi_sblist)) {
+		list_remove_head(&scsi_sblist, psb,
+				 struct lpfc_scsi_buf, list);
+		lpfc_release_scsi_buf_s4(phba, psb);
+	}
+	return num_posted;
+}
+
+/**
+ * lpfc_sli4_repost_scsi_sgl_list - Repsot all the allocated scsi buffer sgls
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine walks the list of scsi buffers that have been allocated and
- * repost them to the HBA by using SGL block post. This is needed after a
+ * repost them to the port by using SGL block post. This is needed after a
  * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
  * is responsible for moving all scsi buffers on the lpfc_abts_scsi_sgl_list
  * to the lpfc_scsi_buf_list. If the repost fails, reject all scsi buffers.
@@ -732,57 +858,21 @@
 int
 lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba)
 {
-	struct lpfc_scsi_buf *psb;
-	int index, status, bcnt = 0, rcnt = 0, rc = 0;
-	LIST_HEAD(sblist);
+	LIST_HEAD(post_sblist);
+	int num_posted, rc = 0;
 
-	for (index = 0; index < phba->sli4_hba.scsi_xri_cnt; index++) {
-		psb = phba->sli4_hba.lpfc_scsi_psb_array[index];
-		if (psb) {
-			/* Remove from SCSI buffer list */
-			list_del(&psb->list);
-			/* Add it to a local SCSI buffer list */
-			list_add_tail(&psb->list, &sblist);
-			if (++rcnt == LPFC_NEMBED_MBOX_SGL_CNT) {
-				bcnt = rcnt;
-				rcnt = 0;
-			}
-		} else
-			/* A hole present in the XRI array, need to skip */
-			bcnt = rcnt;
+	/* get all SCSI buffers need to repost to a local list */
+	spin_lock(&phba->scsi_buf_list_lock);
+	list_splice_init(&phba->lpfc_scsi_buf_list, &post_sblist);
+	spin_unlock(&phba->scsi_buf_list_lock);
 
-		if (index == phba->sli4_hba.scsi_xri_cnt - 1)
-			/* End of XRI array for SCSI buffer, complete */
-			bcnt = rcnt;
-
-		/* Continue until collect up to a nembed page worth of sgls */
-		if (bcnt == 0)
-			continue;
-		/* Now, post the SCSI buffer list sgls as a block */
-		if (!phba->sli4_hba.extents_in_use)
-			status = lpfc_sli4_post_scsi_sgl_block(phba,
-							&sblist,
-							bcnt);
-		else
-			status = lpfc_sli4_post_scsi_sgl_blk_ext(phba,
-							&sblist,
-							bcnt);
-		/* Reset SCSI buffer count for next round of posting */
-		bcnt = 0;
-		while (!list_empty(&sblist)) {
-			list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
-					 list);
-			if (status) {
-				/* Put this back on the abort scsi list */
-				psb->exch_busy = 1;
-				rc++;
-			} else {
-				psb->exch_busy = 0;
-				psb->status = IOSTAT_SUCCESS;
-			}
-			/* Put it back into the SCSI buffer list */
-			lpfc_release_scsi_buf_s4(phba, psb);
-		}
+	/* post the list of scsi buffer sgls to port if available */
+	if (!list_empty(&post_sblist)) {
+		num_posted = lpfc_sli4_post_scsi_sgl_list(phba, &post_sblist,
+						phba->sli4_hba.scsi_xri_cnt);
+		/* failed to post any scsi buffer, return error */
+		if (num_posted == 0)
+			rc = -EIO;
 	}
 	return rc;
 }
@@ -792,12 +882,13 @@
  * @vport: The virtual port for which this call being executed.
  * @num_to_allocate: The requested number of buffers to allocate.
  *
- * This routine allocates a scsi buffer for device with SLI-4 interface spec,
+ * This routine allocates scsi buffers for device with SLI-4 interface spec,
  * the scsi buffer contains all the necessary information needed to initiate
- * a SCSI I/O.
+ * a SCSI I/O. After allocating up to @num_to_allocate SCSI buffers and put
+ * them on a list, it post them to the port by using SGL block post.
  *
  * Return codes:
- *   int - number of scsi buffers that were allocated.
+ *   int - number of scsi buffers that were allocated and posted.
  *   0 = failure, less than num_to_alloc is a partial failure.
  **/
 static int
@@ -810,22 +901,21 @@
 	dma_addr_t pdma_phys_fcp_cmd;
 	dma_addr_t pdma_phys_fcp_rsp;
 	dma_addr_t pdma_phys_bpl, pdma_phys_bpl1;
-	uint16_t iotag, last_xritag = NO_XRI, lxri = 0;
-	int status = 0, index;
-	int bcnt;
-	int non_sequential_xri = 0;
-	LIST_HEAD(sblist);
+	uint16_t iotag, lxri = 0;
+	int bcnt, num_posted;
+	LIST_HEAD(prep_sblist);
+	LIST_HEAD(post_sblist);
+	LIST_HEAD(scsi_sblist);
 
 	for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
 		psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
 		if (!psb)
 			break;
-
 		/*
-		 * Get memory from the pci pool to map the virt space to pci bus
-		 * space for an I/O.  The DMA buffer includes space for the
-		 * struct fcp_cmnd, struct fcp_rsp and the number of bde's
-		 * necessary to support the sg_tablesize.
+		 * Get memory from the pci pool to map the virt space to
+		 * pci bus space for an I/O. The DMA buffer includes space
+		 * for the struct fcp_cmnd, struct fcp_rsp and the number
+		 * of bde's necessary to support the sg_tablesize.
 		 */
 		psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
 						GFP_KERNEL, &psb->dma_handle);
@@ -833,8 +923,6 @@
 			kfree(psb);
 			break;
 		}
-
-		/* Initialize virtual ptrs to dma_buf region. */
 		memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
 
 		/* Allocate iotag for psb->cur_iocbq. */
@@ -855,16 +943,7 @@
 		}
 		psb->cur_iocbq.sli4_lxritag = lxri;
 		psb->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri];
-		if (last_xritag != NO_XRI
-			&& psb->cur_iocbq.sli4_xritag != (last_xritag+1)) {
-			non_sequential_xri = 1;
-		} else
-			list_add_tail(&psb->list, &sblist);
-		last_xritag = psb->cur_iocbq.sli4_xritag;
-
-		index = phba->sli4_hba.scsi_xri_cnt++;
 		psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
-
 		psb->fcp_bpl = psb->data;
 		psb->fcp_cmnd = (psb->data + phba->cfg_sg_dma_buf_size)
 			- (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
@@ -880,9 +959,9 @@
 		pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd);
 
 		/*
-		 * The first two bdes are the FCP_CMD and FCP_RSP.  The balance
-		 * are sg list bdes.  Initialize the first two and leave the
-		 * rest for queuecommand.
+		 * The first two bdes are the FCP_CMD and FCP_RSP.
+		 * The balance are sg list bdes. Initialize the
+		 * first two and leave the rest for queuecommand.
 		 */
 		sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_cmd));
 		sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_cmd));
@@ -917,62 +996,31 @@
 		iocb->ulpBdeCount = 1;
 		iocb->ulpLe = 1;
 		iocb->ulpClass = CLASS3;
-		psb->cur_iocbq.context1  = psb;
+		psb->cur_iocbq.context1 = psb;
 		if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
 			pdma_phys_bpl1 = pdma_phys_bpl + SGL_PAGE_SIZE;
 		else
 			pdma_phys_bpl1 = 0;
 		psb->dma_phys_bpl = pdma_phys_bpl;
-		phba->sli4_hba.lpfc_scsi_psb_array[index] = psb;
-		if (non_sequential_xri) {
-			status = lpfc_sli4_post_sgl(phba, pdma_phys_bpl,
-						pdma_phys_bpl1,
-						psb->cur_iocbq.sli4_xritag);
-			if (status) {
-				/* Put this back on the abort scsi list */
-				psb->exch_busy = 1;
-			} else {
-				psb->exch_busy = 0;
-				psb->status = IOSTAT_SUCCESS;
-			}
-			/* Put it back into the SCSI buffer list */
-			lpfc_release_scsi_buf_s4(phba, psb);
-			break;
-		}
-	}
-	if (bcnt) {
-		if (!phba->sli4_hba.extents_in_use)
-			status = lpfc_sli4_post_scsi_sgl_block(phba,
-								&sblist,
-								bcnt);
-		else
-			status = lpfc_sli4_post_scsi_sgl_blk_ext(phba,
-								&sblist,
-								bcnt);
 
-		if (status) {
-			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
-					"3021 SCSI SGL post error %d\n",
-					status);
-			bcnt = 0;
-		}
-		/* Reset SCSI buffer count for next round of posting */
-		while (!list_empty(&sblist)) {
-			list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
-				 list);
-			if (status) {
-				/* Put this back on the abort scsi list */
-				psb->exch_busy = 1;
-			} else {
-				psb->exch_busy = 0;
-				psb->status = IOSTAT_SUCCESS;
-			}
-			/* Put it back into the SCSI buffer list */
-			lpfc_release_scsi_buf_s4(phba, psb);
-		}
+		/* add the scsi buffer to a post list */
+		list_add_tail(&psb->list, &post_sblist);
+		spin_lock_irq(&phba->scsi_buf_list_lock);
+		phba->sli4_hba.scsi_xri_cnt++;
+		spin_unlock_irq(&phba->scsi_buf_list_lock);
 	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_BG,
+			"3021 Allocate %d out of %d requested new SCSI "
+			"buffers\n", bcnt, num_to_alloc);
 
-	return bcnt + non_sequential_xri;
+	/* post the list of scsi buffer sgls to port if available */
+	if (!list_empty(&post_sblist))
+		num_posted = lpfc_sli4_post_scsi_sgl_list(phba,
+							  &post_sblist, bcnt);
+	else
+		num_posted = 0;
+
+	return num_posted;
 }
 
 /**
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index dbaf5b9..b887c9c 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -67,6 +67,8 @@
 				      struct hbq_dmabuf *);
 static int lpfc_sli4_fp_handle_wcqe(struct lpfc_hba *, struct lpfc_queue *,
 				    struct lpfc_cqe *);
+static int lpfc_sli4_post_els_sgl_list(struct lpfc_hba *, struct list_head *,
+				       int);
 
 static IOCB_t *
 lpfc_get_iocb_from_iocbq(struct lpfc_iocbq *iocbq)
@@ -4967,7 +4969,12 @@
 			      &rsrc_info->u.rsp);
 	*extnt_size = bf_get(lpfc_mbx_get_rsrc_extent_info_size,
 			     &rsrc_info->u.rsp);
- err_exit:
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"3162 Retrieved extents type-%d from port: count:%d, "
+			"size:%d\n", type, *extnt_count, *extnt_size);
+
+err_exit:
 	mempool_free(mbox, phba->mbox_mem_pool);
 	return rc;
 }
@@ -5051,7 +5058,7 @@
  *   0: if successful
  **/
 static int
-lpfc_sli4_cfg_post_extnts(struct lpfc_hba *phba, uint16_t *extnt_cnt,
+lpfc_sli4_cfg_post_extnts(struct lpfc_hba *phba, uint16_t extnt_cnt,
 			  uint16_t type, bool *emb, LPFC_MBOXQ_t *mbox)
 {
 	int rc = 0;
@@ -5060,7 +5067,7 @@
 	uint32_t alloc_len, mbox_tmo;
 
 	/* Calculate the total requested length of the dma memory */
-	req_len = *extnt_cnt * sizeof(uint16_t);
+	req_len = extnt_cnt * sizeof(uint16_t);
 
 	/*
 	 * Calculate the size of an embedded mailbox.  The uint32_t
@@ -5075,7 +5082,7 @@
 	 */
 	*emb = LPFC_SLI4_MBX_EMBED;
 	if (req_len > emb_len) {
-		req_len = *extnt_cnt * sizeof(uint16_t) +
+		req_len = extnt_cnt * sizeof(uint16_t) +
 			sizeof(union lpfc_sli4_cfg_shdr) +
 			sizeof(uint32_t);
 		*emb = LPFC_SLI4_MBX_NEMBED;
@@ -5091,7 +5098,7 @@
 			"size (x%x)\n", alloc_len, req_len);
 		return -ENOMEM;
 	}
-	rc = lpfc_sli4_mbox_rsrc_extent(phba, mbox, *extnt_cnt, type, *emb);
+	rc = lpfc_sli4_mbox_rsrc_extent(phba, mbox, extnt_cnt, type, *emb);
 	if (unlikely(rc))
 		return -EIO;
 
@@ -5149,17 +5156,15 @@
 		return -ENOMEM;
 	}
 
-	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_INIT,
-			"2903 Available Resource Extents "
-			"for resource type 0x%x: Count: 0x%x, "
-			"Size 0x%x\n", type, rsrc_cnt,
-			rsrc_size);
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_INIT | LOG_SLI,
+			"2903 Post resource extents type-0x%x: "
+			"count:%d, size %d\n", type, rsrc_cnt, rsrc_size);
 
 	mbox = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (!mbox)
 		return -ENOMEM;
 
-	rc = lpfc_sli4_cfg_post_extnts(phba, &rsrc_cnt, type, &emb, mbox);
+	rc = lpfc_sli4_cfg_post_extnts(phba, rsrc_cnt, type, &emb, mbox);
 	if (unlikely(rc)) {
 		rc = -EIO;
 		goto err_exit;
@@ -5250,6 +5255,7 @@
 			rc = -ENOMEM;
 			goto err_exit;
 		}
+		phba->sli4_hba.max_cfg_param.xri_used = 0;
 		phba->sli4_hba.xri_ids = kzalloc(rsrc_id_cnt *
 						 sizeof(uint16_t),
 						 GFP_KERNEL);
@@ -5420,7 +5426,6 @@
 	case LPFC_RSC_TYPE_FCOE_XRI:
 		kfree(phba->sli4_hba.xri_bmask);
 		kfree(phba->sli4_hba.xri_ids);
-		bf_set(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
 		list_for_each_entry_safe(rsrc_blk, rsrc_blk_next,
 				    &phba->sli4_hba.lpfc_xri_blk_list, list) {
 			list_del_init(&rsrc_blk->list);
@@ -5612,7 +5617,6 @@
 			goto free_vpi_ids;
 		}
 		phba->sli4_hba.max_cfg_param.xri_used = 0;
-		phba->sli4_hba.xri_count = 0;
 		phba->sli4_hba.xri_ids = kzalloc(count *
 						 sizeof(uint16_t),
 						 GFP_KERNEL);
@@ -5694,7 +5698,6 @@
 		bf_set(lpfc_vpi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
 		kfree(phba->sli4_hba.xri_bmask);
 		kfree(phba->sli4_hba.xri_ids);
-		bf_set(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
 		kfree(phba->sli4_hba.vfi_bmask);
 		kfree(phba->sli4_hba.vfi_ids);
 		bf_set(lpfc_vfi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
@@ -5853,6 +5856,149 @@
 }
 
 /**
+ * lpfc_sli4_repost_els_sgl_list - Repsot the els buffers sgl pages as block
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine walks the list of els buffers that have been allocated and
+ * repost them to the port by using SGL block post. This is needed after a
+ * pci_function_reset/warm_start or start. It attempts to construct blocks
+ * of els buffer sgls which contains contiguous xris and uses the non-embedded
+ * SGL block post mailbox commands to post them to the port. For single els
+ * buffer sgl with non-contiguous xri, if any, it shall use embedded SGL post
+ * mailbox command for posting.
+ *
+ * Returns: 0 = success, non-zero failure.
+ **/
+static int
+lpfc_sli4_repost_els_sgl_list(struct lpfc_hba *phba)
+{
+	struct lpfc_sglq *sglq_entry = NULL;
+	struct lpfc_sglq *sglq_entry_next = NULL;
+	struct lpfc_sglq *sglq_entry_first = NULL;
+	int status, post_cnt = 0, num_posted = 0, block_cnt = 0;
+	int last_xritag = NO_XRI;
+	LIST_HEAD(prep_sgl_list);
+	LIST_HEAD(blck_sgl_list);
+	LIST_HEAD(allc_sgl_list);
+	LIST_HEAD(post_sgl_list);
+	LIST_HEAD(free_sgl_list);
+
+	spin_lock(&phba->hbalock);
+	list_splice_init(&phba->sli4_hba.lpfc_sgl_list, &allc_sgl_list);
+	spin_unlock(&phba->hbalock);
+
+	list_for_each_entry_safe(sglq_entry, sglq_entry_next,
+				 &allc_sgl_list, list) {
+		list_del_init(&sglq_entry->list);
+		block_cnt++;
+		if ((last_xritag != NO_XRI) &&
+		    (sglq_entry->sli4_xritag != last_xritag + 1)) {
+			/* a hole in xri block, form a sgl posting block */
+			list_splice_init(&prep_sgl_list, &blck_sgl_list);
+			post_cnt = block_cnt - 1;
+			/* prepare list for next posting block */
+			list_add_tail(&sglq_entry->list, &prep_sgl_list);
+			block_cnt = 1;
+		} else {
+			/* prepare list for next posting block */
+			list_add_tail(&sglq_entry->list, &prep_sgl_list);
+			/* enough sgls for non-embed sgl mbox command */
+			if (block_cnt == LPFC_NEMBED_MBOX_SGL_CNT) {
+				list_splice_init(&prep_sgl_list,
+						 &blck_sgl_list);
+				post_cnt = block_cnt;
+				block_cnt = 0;
+			}
+		}
+		num_posted++;
+
+		/* keep track of last sgl's xritag */
+		last_xritag = sglq_entry->sli4_xritag;
+
+		/* end of repost sgl list condition for els buffers */
+		if (num_posted == phba->sli4_hba.els_xri_cnt) {
+			if (post_cnt == 0) {
+				list_splice_init(&prep_sgl_list,
+						 &blck_sgl_list);
+				post_cnt = block_cnt;
+			} else if (block_cnt == 1) {
+				status = lpfc_sli4_post_sgl(phba,
+						sglq_entry->phys, 0,
+						sglq_entry->sli4_xritag);
+				if (!status) {
+					/* successful, put sgl to posted list */
+					list_add_tail(&sglq_entry->list,
+						      &post_sgl_list);
+				} else {
+					/* Failure, put sgl to free list */
+					lpfc_printf_log(phba, KERN_WARNING,
+						LOG_SLI,
+						"3159 Failed to post els "
+						"sgl, xritag:x%x\n",
+						sglq_entry->sli4_xritag);
+					list_add_tail(&sglq_entry->list,
+						      &free_sgl_list);
+					spin_lock_irq(&phba->hbalock);
+					phba->sli4_hba.els_xri_cnt--;
+					spin_unlock_irq(&phba->hbalock);
+				}
+			}
+		}
+
+		/* continue until a nembed page worth of sgls */
+		if (post_cnt == 0)
+			continue;
+
+		/* post the els buffer list sgls as a block */
+		status = lpfc_sli4_post_els_sgl_list(phba, &blck_sgl_list,
+						     post_cnt);
+
+		if (!status) {
+			/* success, put sgl list to posted sgl list */
+			list_splice_init(&blck_sgl_list, &post_sgl_list);
+		} else {
+			/* Failure, put sgl list to free sgl list */
+			sglq_entry_first = list_first_entry(&blck_sgl_list,
+							    struct lpfc_sglq,
+							    list);
+			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+					"3160 Failed to post els sgl-list, "
+					"xritag:x%x-x%x\n",
+					sglq_entry_first->sli4_xritag,
+					(sglq_entry_first->sli4_xritag +
+					 post_cnt - 1));
+			list_splice_init(&blck_sgl_list, &free_sgl_list);
+			spin_lock_irq(&phba->hbalock);
+			phba->sli4_hba.els_xri_cnt -= post_cnt;
+			spin_unlock_irq(&phba->hbalock);
+		}
+
+		/* don't reset xirtag due to hole in xri block */
+		if (block_cnt == 0)
+			last_xritag = NO_XRI;
+
+		/* reset els sgl post count for next round of posting */
+		post_cnt = 0;
+	}
+
+	/* free the els sgls failed to post */
+	lpfc_free_sgl_list(phba, &free_sgl_list);
+
+	/* push els sgls posted to the availble list */
+	if (!list_empty(&post_sgl_list)) {
+		spin_lock(&phba->hbalock);
+		list_splice_init(&post_sgl_list,
+				 &phba->sli4_hba.lpfc_sgl_list);
+		spin_unlock(&phba->hbalock);
+	} else {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"3161 Failure to post els sgl to port.\n");
+		return -EIO;
+	}
+	return 0;
+}
+
+/**
  * lpfc_sli4_hba_setup - SLI4 device intialization PCI function
  * @phba: Pointer to HBA context object.
  *
@@ -6063,8 +6209,6 @@
 				"rc = x%x\n", rc);
 		goto out_free_mbox;
 	}
-	/* update physical xri mappings in the scsi buffers */
-	lpfc_scsi_buf_update(phba);
 
 	/* Read the port's service parameters. */
 	rc = lpfc_read_sparam(phba, mboxq, vport->vpi);
@@ -6105,28 +6249,26 @@
 	fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
 	fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
 
-	/* Register SGL pool to the device using non-embedded mailbox command */
-	if (!phba->sli4_hba.extents_in_use) {
-		rc = lpfc_sli4_post_els_sgl_list(phba);
-		if (unlikely(rc)) {
-			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
-					"0582 Error %d during els sgl post "
-					"operation\n", rc);
-			rc = -ENODEV;
-			goto out_free_mbox;
-		}
-	} else {
-		rc = lpfc_sli4_post_els_sgl_list_ext(phba);
-		if (unlikely(rc)) {
-			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
-					"2560 Error %d during els sgl post "
-					"operation\n", rc);
-			rc = -ENODEV;
-			goto out_free_mbox;
-		}
+	/* update host els and scsi xri-sgl sizes and mappings */
+	rc = lpfc_sli4_xri_sgl_update(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"1400 Failed to update xri-sgl size and "
+				"mapping: %d\n", rc);
+		goto out_free_mbox;
 	}
 
-	/* Register SCSI SGL pool to the device */
+	/* register the els sgl pool to the port */
+	rc = lpfc_sli4_repost_els_sgl_list(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0582 Error %d during els sgl post "
+				"operation\n", rc);
+		rc = -ENODEV;
+		goto out_free_mbox;
+	}
+
+	/* register the allocated scsi sgl pool to the port */
 	rc = lpfc_sli4_repost_scsi_sgl_list(phba);
 	if (unlikely(rc)) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
@@ -13080,9 +13222,7 @@
 	} else {
 		set_bit(xri, phba->sli4_hba.xri_bmask);
 		phba->sli4_hba.max_cfg_param.xri_used++;
-		phba->sli4_hba.xri_count++;
 	}
-
 	spin_unlock_irq(&phba->hbalock);
 	return xri;
 }
@@ -13098,7 +13238,6 @@
 __lpfc_sli4_free_xri(struct lpfc_hba *phba, int xri)
 {
 	if (test_and_clear_bit(xri, phba->sli4_hba.xri_bmask)) {
-		phba->sli4_hba.xri_count--;
 		phba->sli4_hba.max_cfg_param.xri_used--;
 	}
 }
@@ -13149,31 +13288,32 @@
 /**
  * lpfc_sli4_post_els_sgl_list - post a block of ELS sgls to the port.
  * @phba: pointer to lpfc hba data structure.
+ * @post_sgl_list: pointer to els sgl entry list.
+ * @count: number of els sgl entries on the list.
  *
  * This routine is invoked to post a block of driver's sgl pages to the
  * HBA using non-embedded mailbox command. No Lock is held. This routine
  * is only called when the driver is loading and after all IO has been
  * stopped.
  **/
-int
-lpfc_sli4_post_els_sgl_list(struct lpfc_hba *phba)
+static int
+lpfc_sli4_post_els_sgl_list(struct lpfc_hba *phba,
+			    struct list_head *post_sgl_list,
+			    int post_cnt)
 {
-	struct lpfc_sglq *sglq_entry;
+	struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
 	struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
 	struct sgl_page_pairs *sgl_pg_pairs;
 	void *viraddr;
 	LPFC_MBOXQ_t *mbox;
 	uint32_t reqlen, alloclen, pg_pairs;
 	uint32_t mbox_tmo;
-	uint16_t xritag_start = 0, lxri = 0;
-	int els_xri_cnt, rc = 0;
+	uint16_t xritag_start = 0;
+	int rc = 0;
 	uint32_t shdr_status, shdr_add_status;
 	union lpfc_sli4_cfg_shdr *shdr;
 
-	/* The number of sgls to be posted */
-	els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
-
-	reqlen = els_xri_cnt * sizeof(struct sgl_page_pairs) +
+	reqlen = phba->sli4_hba.els_xri_cnt * sizeof(struct sgl_page_pairs) +
 		 sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
 	if (reqlen > SLI4_PAGE_SIZE) {
 		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
@@ -13203,25 +13343,8 @@
 	sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
 	sgl_pg_pairs = &sgl->sgl_pg_pairs;
 
-	for (pg_pairs = 0; pg_pairs < els_xri_cnt; pg_pairs++) {
-		sglq_entry = phba->sli4_hba.lpfc_els_sgl_array[pg_pairs];
-
-		/*
-		 * Assign the sglq a physical xri only if the driver has not
-		 * initialized those resources.  A port reset only needs
-		 * the sglq's posted.
-		 */
-		if (bf_get(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags) !=
-		    LPFC_XRI_RSRC_RDY) {
-			lxri = lpfc_sli4_next_xritag(phba);
-			if (lxri == NO_XRI) {
-				lpfc_sli4_mbox_cmd_free(phba, mbox);
-				return -ENOMEM;
-			}
-			sglq_entry->sli4_lxritag = lxri;
-			sglq_entry->sli4_xritag = phba->sli4_hba.xri_ids[lxri];
-		}
-
+	pg_pairs = 0;
+	list_for_each_entry_safe(sglq_entry, sglq_next, post_sgl_list, list) {
 		/* Set up the sge entry */
 		sgl_pg_pairs->sgl_pg0_addr_lo =
 				cpu_to_le32(putPaddrLow(sglq_entry->phys));
@@ -13236,11 +13359,12 @@
 		if (pg_pairs == 0)
 			xritag_start = sglq_entry->sli4_xritag;
 		sgl_pg_pairs++;
+		pg_pairs++;
 	}
 
 	/* Complete initialization and perform endian conversion. */
 	bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
-	bf_set(lpfc_post_sgl_pages_xricnt, sgl, els_xri_cnt);
+	bf_set(lpfc_post_sgl_pages_xricnt, sgl, phba->sli4_hba.els_xri_cnt);
 	sgl->word0 = cpu_to_le32(sgl->word0);
 	if (!phba->sli4_hba.intr_enable)
 		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
@@ -13260,183 +13384,6 @@
 				shdr_status, shdr_add_status, rc);
 		rc = -ENXIO;
 	}
-
-	if (rc == 0)
-		bf_set(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags,
-		       LPFC_XRI_RSRC_RDY);
-	return rc;
-}
-
-/**
- * lpfc_sli4_post_els_sgl_list_ext - post a block of ELS sgls to the port.
- * @phba: pointer to lpfc hba data structure.
- *
- * This routine is invoked to post a block of driver's sgl pages to the
- * HBA using non-embedded mailbox command. No Lock is held. This routine
- * is only called when the driver is loading and after all IO has been
- * stopped.
- **/
-int
-lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba)
-{
-	struct lpfc_sglq *sglq_entry;
-	struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
-	struct sgl_page_pairs *sgl_pg_pairs;
-	void *viraddr;
-	LPFC_MBOXQ_t *mbox;
-	uint32_t reqlen, alloclen, index;
-	uint32_t mbox_tmo;
-	uint16_t rsrc_start, rsrc_size, els_xri_cnt, post_els_xri_cnt;
-	uint16_t xritag_start = 0, lxri = 0;
-	struct lpfc_rsrc_blks *rsrc_blk;
-	int cnt, ttl_cnt, rc = 0;
-	int loop_cnt;
-	uint32_t shdr_status, shdr_add_status;
-	union lpfc_sli4_cfg_shdr *shdr;
-
-	/* The number of sgls to be posted */
-	els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
-
-	reqlen = els_xri_cnt * sizeof(struct sgl_page_pairs) +
-		 sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
-	if (reqlen > SLI4_PAGE_SIZE) {
-		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
-				"2989 Block sgl registration required DMA "
-				"size (%d) great than a page\n", reqlen);
-		return -ENOMEM;
-	}
-
-	cnt = 0;
-	ttl_cnt = 0;
-	post_els_xri_cnt = els_xri_cnt;
-	list_for_each_entry(rsrc_blk, &phba->sli4_hba.lpfc_xri_blk_list,
-			    list) {
-		rsrc_start = rsrc_blk->rsrc_start;
-		rsrc_size = rsrc_blk->rsrc_size;
-
-		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"3014 Working ELS Extent start %d, cnt %d\n",
-				rsrc_start, rsrc_size);
-
-		loop_cnt = min(post_els_xri_cnt, rsrc_size);
-		if (loop_cnt < post_els_xri_cnt) {
-			post_els_xri_cnt -= loop_cnt;
-			ttl_cnt += loop_cnt;
-		} else
-			ttl_cnt += post_els_xri_cnt;
-
-		mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
-		if (!mbox)
-			return -ENOMEM;
-		/*
-		 * Allocate DMA memory and set up the non-embedded mailbox
-		 * command.
-		 */
-		alloclen = lpfc_sli4_config(phba, mbox,
-					LPFC_MBOX_SUBSYSTEM_FCOE,
-					LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES,
-					reqlen, LPFC_SLI4_MBX_NEMBED);
-		if (alloclen < reqlen) {
-			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-					"2987 Allocated DMA memory size (%d) "
-					"is less than the requested DMA memory "
-					"size (%d)\n", alloclen, reqlen);
-			lpfc_sli4_mbox_cmd_free(phba, mbox);
-			return -ENOMEM;
-		}
-
-		/* Set up the SGL pages in the non-embedded DMA pages */
-		viraddr = mbox->sge_array->addr[0];
-		sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
-		sgl_pg_pairs = &sgl->sgl_pg_pairs;
-
-		/*
-		 * The starting resource may not begin at zero. Control
-		 * the loop variants via the block resource parameters,
-		 * but handle the sge pointers with a zero-based index
-		 * that doesn't get reset per loop pass.
-		 */
-		for (index = rsrc_start;
-		     index < rsrc_start + loop_cnt;
-		     index++) {
-			sglq_entry = phba->sli4_hba.lpfc_els_sgl_array[cnt];
-
-			/*
-			 * Assign the sglq a physical xri only if the driver
-			 * has not initialized those resources.  A port reset
-			 * only needs the sglq's posted.
-			 */
-			if (bf_get(lpfc_xri_rsrc_rdy,
-				   &phba->sli4_hba.sli4_flags) !=
-				   LPFC_XRI_RSRC_RDY) {
-				lxri = lpfc_sli4_next_xritag(phba);
-				if (lxri == NO_XRI) {
-					lpfc_sli4_mbox_cmd_free(phba, mbox);
-					rc = -ENOMEM;
-					goto err_exit;
-				}
-				sglq_entry->sli4_lxritag = lxri;
-				sglq_entry->sli4_xritag =
-						phba->sli4_hba.xri_ids[lxri];
-			}
-
-			/* Set up the sge entry */
-			sgl_pg_pairs->sgl_pg0_addr_lo =
-				cpu_to_le32(putPaddrLow(sglq_entry->phys));
-			sgl_pg_pairs->sgl_pg0_addr_hi =
-				cpu_to_le32(putPaddrHigh(sglq_entry->phys));
-			sgl_pg_pairs->sgl_pg1_addr_lo =
-				cpu_to_le32(putPaddrLow(0));
-			sgl_pg_pairs->sgl_pg1_addr_hi =
-				cpu_to_le32(putPaddrHigh(0));
-
-			/* Track the starting physical XRI for the mailbox. */
-			if (index == rsrc_start)
-				xritag_start = sglq_entry->sli4_xritag;
-			sgl_pg_pairs++;
-			cnt++;
-		}
-
-		/* Complete initialization and perform endian conversion. */
-		rsrc_blk->rsrc_used += loop_cnt;
-		bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
-		bf_set(lpfc_post_sgl_pages_xricnt, sgl, loop_cnt);
-		sgl->word0 = cpu_to_le32(sgl->word0);
-
-		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"3015 Post ELS Extent SGL, start %d, "
-				"cnt %d, used %d\n",
-				xritag_start, loop_cnt, rsrc_blk->rsrc_used);
-		if (!phba->sli4_hba.intr_enable)
-			rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
-		else {
-			mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
-			rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
-		}
-		shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
-		shdr_status = bf_get(lpfc_mbox_hdr_status,
-				     &shdr->response);
-		shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
-					 &shdr->response);
-		if (rc != MBX_TIMEOUT)
-			lpfc_sli4_mbox_cmd_free(phba, mbox);
-		if (shdr_status || shdr_add_status || rc) {
-			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
-					"2988 POST_SGL_BLOCK mailbox "
-					"command failed status x%x "
-					"add_status x%x mbx status x%x\n",
-					shdr_status, shdr_add_status, rc);
-			rc = -ENXIO;
-			goto err_exit;
-		}
-		if (ttl_cnt >= els_xri_cnt)
-			break;
-	}
-
- err_exit:
-	if (rc == 0)
-		bf_set(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags,
-		       LPFC_XRI_RSRC_RDY);
 	return rc;
 }
 
@@ -13452,8 +13399,9 @@
  *
  **/
 int
-lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba, struct list_head *sblist,
-			      int cnt)
+lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba,
+			      struct list_head *sblist,
+			      int count)
 {
 	struct lpfc_scsi_buf *psb;
 	struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
@@ -13469,7 +13417,7 @@
 	union lpfc_sli4_cfg_shdr *shdr;
 
 	/* Calculate the requested length of the dma memory */
-	reqlen = cnt * sizeof(struct sgl_page_pairs) +
+	reqlen = count * sizeof(struct sgl_page_pairs) +
 		 sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
 	if (reqlen > SLI4_PAGE_SIZE) {
 		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
@@ -13553,169 +13501,6 @@
 }
 
 /**
- * lpfc_sli4_post_scsi_sgl_blk_ext - post a block of scsi sgls to the port.
- * @phba: pointer to lpfc hba data structure.
- * @sblist: pointer to scsi buffer list.
- * @count: number of scsi buffers on the list.
- *
- * This routine is invoked to post a block of @count scsi sgl pages from a
- * SCSI buffer list @sblist to the HBA using non-embedded mailbox command.
- * No Lock is held.
- *
- **/
-int
-lpfc_sli4_post_scsi_sgl_blk_ext(struct lpfc_hba *phba, struct list_head *sblist,
-				int cnt)
-{
-	struct lpfc_scsi_buf *psb = NULL;
-	struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
-	struct sgl_page_pairs *sgl_pg_pairs;
-	void *viraddr;
-	LPFC_MBOXQ_t *mbox;
-	uint32_t reqlen, alloclen, pg_pairs;
-	uint32_t mbox_tmo;
-	uint16_t xri_start = 0, scsi_xri_start;
-	uint16_t rsrc_range;
-	int rc = 0, avail_cnt;
-	uint32_t shdr_status, shdr_add_status;
-	dma_addr_t pdma_phys_bpl1;
-	union lpfc_sli4_cfg_shdr *shdr;
-	struct lpfc_rsrc_blks *rsrc_blk;
-	uint32_t xri_cnt = 0;
-
-	/* Calculate the total requested length of the dma memory */
-	reqlen = cnt * sizeof(struct sgl_page_pairs) +
-		 sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
-	if (reqlen > SLI4_PAGE_SIZE) {
-		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
-				"2932 Block sgl registration required DMA "
-				"size (%d) great than a page\n", reqlen);
-		return -ENOMEM;
-	}
-
-	/*
-	 * The use of extents requires the driver to post the sgl headers
-	 * in multiple postings to meet the contiguous resource assignment.
-	 */
-	psb = list_prepare_entry(psb, sblist, list);
-	scsi_xri_start = phba->sli4_hba.scsi_xri_start;
-	list_for_each_entry(rsrc_blk, &phba->sli4_hba.lpfc_xri_blk_list,
-			    list) {
-		rsrc_range = rsrc_blk->rsrc_start + rsrc_blk->rsrc_size;
-		if (rsrc_range < scsi_xri_start)
-			continue;
-		else if (rsrc_blk->rsrc_used >= rsrc_blk->rsrc_size)
-			continue;
-		else
-			avail_cnt = rsrc_blk->rsrc_size - rsrc_blk->rsrc_used;
-
-		reqlen = (avail_cnt * sizeof(struct sgl_page_pairs)) +
-			sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
-		/*
-		 * Allocate DMA memory and set up the non-embedded mailbox
-		 * command. The mbox is used to post an SGL page per loop
-		 * but the DMA memory has a use-once semantic so the mailbox
-		 * is used and freed per loop pass.
-		 */
-		mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
-		if (!mbox) {
-			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-					"2933 Failed to allocate mbox cmd "
-					"memory\n");
-			return -ENOMEM;
-		}
-		alloclen = lpfc_sli4_config(phba, mbox,
-					LPFC_MBOX_SUBSYSTEM_FCOE,
-					LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES,
-					reqlen,
-					LPFC_SLI4_MBX_NEMBED);
-		if (alloclen < reqlen) {
-			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-					"2934 Allocated DMA memory size (%d) "
-					"is less than the requested DMA memory "
-					"size (%d)\n", alloclen, reqlen);
-			lpfc_sli4_mbox_cmd_free(phba, mbox);
-			return -ENOMEM;
-		}
-
-		/* Get the first SGE entry from the non-embedded DMA memory */
-		viraddr = mbox->sge_array->addr[0];
-
-		/* Set up the SGL pages in the non-embedded DMA pages */
-		sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
-		sgl_pg_pairs = &sgl->sgl_pg_pairs;
-
-		/* pg_pairs tracks posted SGEs per loop iteration. */
-		pg_pairs = 0;
-		list_for_each_entry_continue(psb, sblist, list) {
-			/* Set up the sge entry */
-			sgl_pg_pairs->sgl_pg0_addr_lo =
-				cpu_to_le32(putPaddrLow(psb->dma_phys_bpl));
-			sgl_pg_pairs->sgl_pg0_addr_hi =
-				cpu_to_le32(putPaddrHigh(psb->dma_phys_bpl));
-			if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
-				pdma_phys_bpl1 = psb->dma_phys_bpl +
-					SGL_PAGE_SIZE;
-			else
-				pdma_phys_bpl1 = 0;
-			sgl_pg_pairs->sgl_pg1_addr_lo =
-				cpu_to_le32(putPaddrLow(pdma_phys_bpl1));
-			sgl_pg_pairs->sgl_pg1_addr_hi =
-				cpu_to_le32(putPaddrHigh(pdma_phys_bpl1));
-			/* Keep the first xri for this extent. */
-			if (pg_pairs == 0)
-				xri_start = psb->cur_iocbq.sli4_xritag;
-			sgl_pg_pairs++;
-			pg_pairs++;
-			xri_cnt++;
-
-			/*
-			 * Track two exit conditions - the loop has constructed
-			 * all of the caller's SGE pairs or all available
-			 * resource IDs in this extent are consumed.
-			 */
-			if ((xri_cnt == cnt) || (pg_pairs >= avail_cnt))
-				break;
-		}
-		rsrc_blk->rsrc_used += pg_pairs;
-		bf_set(lpfc_post_sgl_pages_xri, sgl, xri_start);
-		bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs);
-
-		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"3016 Post SCSI Extent SGL, start %d, cnt %d "
-				"blk use %d\n",
-				xri_start, pg_pairs, rsrc_blk->rsrc_used);
-		/* Perform endian conversion if necessary */
-		sgl->word0 = cpu_to_le32(sgl->word0);
-		if (!phba->sli4_hba.intr_enable)
-			rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
-		else {
-			mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
-			rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
-		}
-		shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
-		shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
-		shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
-					 &shdr->response);
-		if (rc != MBX_TIMEOUT)
-			lpfc_sli4_mbox_cmd_free(phba, mbox);
-		if (shdr_status || shdr_add_status || rc) {
-			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
-					"2935 POST_SGL_BLOCK mailbox command "
-					"failed status x%x add_status x%x "
-					"mbx status x%x\n",
-					shdr_status, shdr_add_status, rc);
-			return -ENXIO;
-		}
-
-		/* Post only what is requested. */
-		if (xri_cnt >= cnt)
-			break;
-	}
-	return rc;
-}
-
-/**
  * lpfc_fc_frame_check - Check that this frame is a valid frame to handle
  * @phba: pointer to lpfc_hba struct that the frame was received on
  * @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index c19d139..f097382 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -493,14 +493,12 @@
 	uint16_t next_rpi;
 	uint16_t scsi_xri_max;
 	uint16_t scsi_xri_cnt;
+	uint16_t els_xri_cnt;
 	uint16_t scsi_xri_start;
 	struct list_head lpfc_free_sgl_list;
 	struct list_head lpfc_sgl_list;
-	struct lpfc_sglq **lpfc_els_sgl_array;
 	struct list_head lpfc_abts_els_sgl_list;
-	struct lpfc_scsi_buf **lpfc_scsi_psb_array;
 	struct list_head lpfc_abts_scsi_buf_list;
-	uint32_t total_sglq_bufs;
 	struct lpfc_sglq **lpfc_sglq_active_list;
 	struct list_head lpfc_rpi_hdr_list;
 	unsigned long *rpi_bmask;
@@ -509,7 +507,6 @@
 	struct list_head lpfc_rpi_blk_list;
 	unsigned long *xri_bmask;
 	uint16_t *xri_ids;
-	uint16_t xri_count;
 	struct list_head lpfc_xri_blk_list;
 	unsigned long *vfi_bmask;
 	uint16_t *vfi_ids;
@@ -614,11 +611,7 @@
 int lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *);
 uint16_t lpfc_sli4_next_xritag(struct lpfc_hba *);
 int lpfc_sli4_post_async_mbox(struct lpfc_hba *);
-int lpfc_sli4_post_els_sgl_list(struct lpfc_hba *phba);
-int lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba);
 int lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *, struct list_head *, int);
-int lpfc_sli4_post_scsi_sgl_blk_ext(struct lpfc_hba *, struct list_head *,
-				    int);
 struct lpfc_cq_event *__lpfc_sli4_cq_event_alloc(struct lpfc_hba *);
 struct lpfc_cq_event *lpfc_sli4_cq_event_alloc(struct lpfc_hba *);
 void __lpfc_sli4_cq_event_release(struct lpfc_hba *, struct lpfc_cq_event *);