[media] bt8xx: Use current logging styles
This converts some messages that were emitted at
KERN_INFO to KERN_DEBUG. All of these messages
were guarded by bttv_debug tests.
Add pr_fmt.
Convert printks to pr_<level>
Convert printks without KERN_<level> to appropriate pr_<level>.
Removed embedded prefixes when pr_fmt was added.
Whitespace cleanups when around other conversions.
Macros coded with if statements should be do { if... } while (0)
so the macros can be used in other if tests.
Use ##__VA_ARGS__ for variadic macro as well.
Coalesce format strings.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index 5b15f63..5939021 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -25,6 +25,8 @@
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/kmod.h>
@@ -2905,19 +2907,17 @@
if (type != -1) {
/* found it */
- printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
- "PCI subsystem ID is %04x:%04x\n",
- btv->c.nr,cards[type].name,cards[type].cardnr,
- btv->cardid & 0xffff,
- (btv->cardid >> 16) & 0xffff);
+ pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n",
+ btv->c.nr, cards[type].name, cards[type].cardnr,
+ btv->cardid & 0xffff,
+ (btv->cardid >> 16) & 0xffff);
btv->c.type = cards[type].cardnr;
} else {
/* 404 */
- printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
- btv->c.nr, btv->cardid & 0xffff,
- (btv->cardid >> 16) & 0xffff);
- printk(KERN_DEBUG "please mail id, board name and "
- "the correct card= insmod option to linux-media@vger.kernel.org\n");
+ pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n",
+ btv->c.nr, btv->cardid & 0xffff,
+ (btv->cardid >> 16) & 0xffff);
+ pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n");
}
}
@@ -2926,10 +2926,10 @@
btv->c.type=card[btv->c.nr];
/* print which card config we are using */
- printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
- bttv_tvcards[btv->c.type].name, btv->c.type,
- card[btv->c.nr] < bttv_num_tvcards
- ? "insmod option" : "autodetected");
+ pr_info("%d: using: %s [card=%d,%s]\n",
+ btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type,
+ card[btv->c.nr] < bttv_num_tvcards
+ ? "insmod option" : "autodetected");
/* overwrite gpio stuff ?? */
if (UNSET == audioall && UNSET == audiomux[0])
@@ -2948,12 +2948,13 @@
}
}
bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
- printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
- btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
+ pr_info("%d: gpio config override: mask=0x%x, mux=",
+ btv->c.nr, bttv_tvcards[btv->c.type].gpiomask);
for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
- printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
+ pr_cont("%s0x%x",
+ i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
}
- printk("\n");
+ pr_cont("\n");
}
/*
@@ -2974,8 +2975,8 @@
if (-1 != type) {
btv->c.type = type;
- printk("bttv%d: detected by eeprom: %s [card=%d]\n",
- btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
+ pr_info("%d: detected by eeprom: %s [card=%d]\n",
+ btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
}
}
@@ -3019,7 +3020,7 @@
tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
break;
default:
- printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
+ pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr);
break;
}
@@ -3036,13 +3037,13 @@
if (is_capture_only)
tuner_type = TUNER_ABSENT; /* No tuner present */
- printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
- btv->c.nr, has_radio ? "yes" : "no ",
- has_remote ? "yes" : "no ", tuner_type, gpio);
- printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
- btv->c.nr, is_lr90 ? "yes" : "no ",
- has_tda9820_tda9821 ? "yes" : "no ",
- is_capture_only ? "yes" : "no ");
+ pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
+ btv->c.nr, has_radio ? "yes" : "no",
+ has_remote ? "yes" : "no", tuner_type, gpio);
+ pr_info("%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
+ btv->c.nr, is_lr90 ? "yes" : "no",
+ has_tda9820_tda9821 ? "yes" : "no",
+ is_capture_only ? "yes" : "no");
if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
btv->tuner_type = tuner_type;
@@ -3091,12 +3092,11 @@
if (btv->c.type == BTTV_BOARD_PINNACLE)
btv->c.type = BTTV_BOARD_PINNACLEPRO;
}
- printk(KERN_INFO
- "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
- btv->c.nr, id+1, btv->tuner_type,
- !btv->has_radio ? "no" :
- (btv->has_matchbox ? "matchbox" : "fmtuner"),
- (-1 == msp) ? "no" : "yes");
+ pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
+ btv->c.nr, id+1, btv->tuner_type,
+ !btv->has_radio ? "no" :
+ (btv->has_matchbox ? "matchbox" : "fmtuner"),
+ (-1 == msp) ? "no" : "yes");
} else {
/* new cards with microtune tuner */
id = 63 - id;
@@ -3138,9 +3138,8 @@
}
if (-1 != msp)
btv->c.type = BTTV_BOARD_PINNACLEPRO;
- printk(KERN_INFO
- "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
- btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
+ pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
+ btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
btv->tuner_type = TUNER_MT2032;
}
}
@@ -3202,7 +3201,7 @@
static void init_lmlbt4x(struct bttv *btv)
{
- printk(KERN_DEBUG "LMLBT4x init\n");
+ pr_debug("LMLBT4x init\n");
btwrite(0x000000, BT848_GPIO_REG_INP);
gpio_inout(0xffffff, 0x0006C0);
gpio_write(0x000000);
@@ -3246,7 +3245,7 @@
return;
if (bttv_debug)
- printk("bttv%d: BT878A ARESET\n",btv->c.nr);
+ pr_debug("%d: BT878A ARESET\n", btv->c.nr);
btwrite((1<<7), 0x058);
udelay(10);
btwrite( 0, 0x058);
@@ -3349,7 +3348,8 @@
case BTTV_BOARD_MAGICTVIEW061:
if (btv->cardid == 0x3002144f) {
btv->has_radio=1;
- printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
+ pr_info("%d: radio detected by subsystem id (CPH05x)\n",
+ btv->c.nr);
}
break;
case BTTV_BOARD_STB2:
@@ -3438,17 +3438,16 @@
btv->tuner_type = tuner[btv->c.nr];
if (btv->tuner_type == TUNER_ABSENT)
- printk(KERN_INFO "bttv%d: tuner absent\n", btv->c.nr);
- else if(btv->tuner_type == UNSET)
- printk(KERN_WARNING "bttv%d: tuner type unset\n", btv->c.nr);
+ pr_info("%d: tuner absent\n", btv->c.nr);
+ else if (btv->tuner_type == UNSET)
+ pr_warn("%d: tuner type unset\n", btv->c.nr);
else
- printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr,
- btv->tuner_type);
+ pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type);
if (autoload != UNSET) {
- printk(KERN_WARNING "bttv%d: the autoload option is obsolete.\n", btv->c.nr);
- printk(KERN_WARNING "bttv%d: use option msp3400, tda7432 or tvaudio to\n", btv->c.nr);
- printk(KERN_WARNING "bttv%d: override which audio module should be used.\n", btv->c.nr);
+ pr_warn("%d: the autoload option is obsolete\n", btv->c.nr);
+ pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n",
+ btv->c.nr);
}
if (UNSET == btv->tuner_type)
@@ -3541,8 +3540,7 @@
}
default:
- printk(KERN_WARNING "bttv%d: unknown audiodev value!\n",
- btv->c.nr);
+ pr_warn("%d: unknown audiodev value!\n", btv->c.nr);
return;
}
@@ -3585,8 +3583,7 @@
return;
no_audio:
- printk(KERN_WARNING "bttv%d: audio absent, no audio device found!\n",
- btv->c.nr);
+ pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr);
}
@@ -3639,19 +3636,19 @@
{
if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
- printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
- btv->c.nr,&eeprom_data[0x1e]);
+ pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
+ btv->c.nr, &eeprom_data[0x1e]);
} else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
- printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
- btv->c.nr,&eeprom_data[0x1e]);
+ pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
+ btv->c.nr, &eeprom_data[0x1e]);
} else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
btv->tuner_type=TUNER_PHILIPS_NTSC;
- printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
- btv->c.nr,&eeprom_data[0x1e]);
+ pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
+ btv->c.nr, &eeprom_data[0x1e]);
} else {
- printk("bttv%d: Modtec: Unknown TunerString: %s\n",
- btv->c.nr,&eeprom_data[0x1e]);
+ pr_info("%d: Modtec: Unknown TunerString: %s\n",
+ btv->c.nr, &eeprom_data[0x1e]);
}
}
@@ -3663,7 +3660,7 @@
btv->tuner_type = tv.tuner_type;
btv->has_radio = tv.has_radio;
- printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
+ pr_info("%d: Hauppauge eeprom indicates model#%d\n",
btv->c.nr, tv.model);
/*
@@ -3671,7 +3668,7 @@
* type based on model #.
*/
if(tv.model == 64900) {
- printk("bttv%d: Switching board type from %s to %s\n",
+ pr_info("%d: Switching board type from %s to %s\n",
btv->c.nr,
bttv_tvcards[btv->c.type].name,
bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
@@ -3698,8 +3695,7 @@
freq=88000/62.5;
tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
if (0x1ed8 == tea5757_read(btv)) {
- printk("bttv%d: Terratec Active Radio Upgrade found.\n",
- btv->c.nr);
+ pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr);
btv->has_radio = 1;
btv->has_saa6588 = 1;
btv->has_matchbox = 1;
@@ -3771,13 +3767,12 @@
rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
if (rc != 0) {
- printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
- btv->c.nr);
+ pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr);
return rc;
}
rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
- printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
- btv->c.nr, (rc < 0) ? "failed" : "ok");
+ pr_info("%d: altera firmware upload %s\n",
+ btv->c.nr, (rc < 0) ? "failed" : "ok");
release_firmware(fw_entry);
return rc;
}
@@ -3873,29 +3868,27 @@
break;
default:
/* unknown...leave generic, but get serial # */
- printk(KERN_INFO "bttv%d: "
- "osprey eeprom: unknown card type 0x%04x\n",
- btv->c.nr, type);
+ pr_info("%d: osprey eeprom: unknown card type 0x%04x\n",
+ btv->c.nr, type);
break;
}
serial = get_unaligned_be32((__be32 *)(ee+6));
}
- printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n",
- btv->c.nr, cardid,
- cardid>0 ? bttv_tvcards[cardid].name : "Unknown", serial);
+ pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n",
+ btv->c.nr, cardid,
+ cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial);
if (cardid<0 || btv->c.type == cardid)
return;
/* card type isn't set correctly */
if (card[btv->c.nr] < bttv_num_tvcards) {
- printk(KERN_WARNING "bttv%d: osprey eeprom: "
- "Not overriding user specified card type\n", btv->c.nr);
+ pr_warn("%d: osprey eeprom: Not overriding user specified card type\n",
+ btv->c.nr);
} else {
- printk(KERN_INFO "bttv%d: osprey eeprom: "
- "Changing card type from %d to %d\n", btv->c.nr,
- btv->c.type, cardid);
+ pr_info("%d: osprey eeprom: Changing card type from %d to %d\n",
+ btv->c.nr, btv->c.type, cardid);
btv->c.type = cardid;
}
}
@@ -3938,14 +3931,14 @@
if (tuner_format == 0x09)
tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
- printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
+ pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=",
btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
if (tuner_type) {
btv->tuner_type = tuner_type;
- printk(KERN_CONT "%d", tuner_type);
+ pr_cont("%d", tuner_type);
} else
- printk(KERN_CONT "Unknown type");
- printk(KERN_CONT " radio:%s remote control:%s\n",
+ pr_cont("Unknown type");
+ pr_cont(" radio:%s remote control:%s\n",
tuner_tv_fm ? "yes" : "no",
btv->has_remote ? "yes" : "no");
}
@@ -3993,8 +3986,8 @@
if (bttv_gpio)
bttv_gpio_tracking(btv,"msp34xx");
if (bttv_verbose)
- printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
- "init [%d]\n", btv->c.nr, pin);
+ pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n",
+ btv->c.nr, pin);
}
/* ----------------------------------------------------------------------- */
@@ -4034,7 +4027,7 @@
btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
/* Initialise MAX517 DAC */
- printk(KERN_INFO "Setting DAC reference voltage level ...\n");
+ pr_info("Setting DAC reference voltage level ...\n");
bttv_I2CWrite(btv,0x5E,0,0x80,1);
/* Initialise 12C508 PIC */
@@ -4043,7 +4036,7 @@
* argument so the numbers are different */
- printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
+ pr_info("Initialising 12C508 PIC chip ...\n");
/* First of all, enable the clock line. This is used in the PXC200-F */
val = btread(BT848_GPIO_DMA_CTL);
@@ -4062,13 +4055,12 @@
for (i = 0; i < ARRAY_SIZE(vals); i++) {
tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
if (tmp != -1) {
- printk(KERN_INFO
- "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
+ pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
}
}
- printk(KERN_INFO "PXC200 Initialised.\n");
+ pr_info("PXC200 Initialised\n");
}
@@ -4107,8 +4099,7 @@
uint32_t dataRead = 0;
long watchdog_value = 0x0E;
- printk (KERN_INFO
- "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
+ pr_info("%d: Adlink RTV-24 initialisation in progress ...\n",
btv->c.nr);
btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
@@ -4122,8 +4113,7 @@
dataRead = btread (BT848_GPIO_DATA);
if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
- printk (KERN_INFO
- "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
+ pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
btv->c.nr, dataRead);
}
@@ -4136,15 +4126,13 @@
dataRead = btread (BT848_GPIO_DATA);
if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
- printk (KERN_INFO
- "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
+ pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
btv->c.nr, dataRead);
return;
}
- printk (KERN_INFO
- "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
+ pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr);
}
@@ -4261,22 +4249,25 @@
while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
schedule();
if (bus_in(btv,btv->mbox_data)) {
- printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
+ pr_warn("%d: tea5757: read timeout\n", btv->c.nr);
return -1;
}
- dprintk("bttv%d: tea5757:",btv->c.nr);
+ dprintk("%d: tea5757:", btv->c.nr);
for (i = 0; i < 24; i++) {
udelay(5);
bus_high(btv,btv->mbox_clk);
udelay(5);
- dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
+ dprintk_cont("%c",
+ bus_in(btv, btv->mbox_most) == 0 ? 'T' : '-');
bus_low(btv,btv->mbox_clk);
value <<= 1;
value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
- dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
+ dprintk_cont("%c",
+ bus_in(btv, btv->mbox_most) == 0 ? 'S' : 'M');
}
- dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
+ dprintk_cont("\n");
+ dprintk("%d: tea5757: read 0x%X\n", btv->c.nr, value);
return value;
}
@@ -4295,7 +4286,7 @@
if (bttv_gpio)
bttv_gpio_tracking(btv,"tea5757 write");
- dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
+ dprintk("%d: tea5757: write 0x%X\n", btv->c.nr, value);
bus_low(btv,btv->mbox_clk);
bus_high(btv,btv->mbox_we);
for (i = 0; i < 25; i++) {
@@ -4547,7 +4538,7 @@
static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
{
- dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input);
+ dprintk("%d : picolo_tetra_muxsel => input = %d\n", btv->c.nr, input);
/*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
/*GPIO[20]&GPIO[21] used to choose the right input*/
btwrite (input<<20,BT848_GPIO_DATA);
@@ -4592,7 +4583,7 @@
int key = input % 4;
int matrix = input / 4;
- dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
+ dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
btv->c.nr, input, matrix, key);
/* Handles the input selection on the TDA8540's */
@@ -4649,15 +4640,17 @@
buf[1]=0;
rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
if (rc) {
- printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
+ pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n",
+ btv->c.nr, rc);
/* not PXC ? do nothing */
- return;
+ return;
}
rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
if (!(rc & PX_CFG_PXC200F)) {
- printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
- return;
+ pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n",
+ btv->c.nr, rc);
+ return;
}
@@ -4696,7 +4689,7 @@
else /* older device */
btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
- printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
+ pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux);
}
static void phytec_muxsel(struct bttv *btv, unsigned int input)
@@ -4847,29 +4840,27 @@
/* print warnings about any quirks found */
if (triton1)
- printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
+ pr_info("Host bridge needs ETBF enabled\n");
if (vsfx)
- printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
+ pr_info("Host bridge needs VSFX enabled\n");
if (pcipci_fail) {
- printk(KERN_INFO "bttv: bttv and your chipset may not work "
- "together.\n");
+ pr_info("bttv and your chipset may not work together\n");
if (!no_overlay) {
- printk(KERN_INFO "bttv: overlay will be disabled.\n");
+ pr_info("overlay will be disabled\n");
no_overlay = 1;
} else {
- printk(KERN_INFO "bttv: overlay forced. Use this "
- "option at your own risk.\n");
+ pr_info("overlay forced. Use this option at your own risk.\n");
}
}
if (UNSET != latency)
- printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
+ pr_info("pci latency fixup [%d]\n", latency);
while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82441, dev))) {
unsigned char b;
pci_read_config_byte(dev, 0x53, &b);
if (bttv_debug)
- printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
- "bufcon=0x%02x\n",b);
+ pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n",
+ b);
}
}
@@ -4882,12 +4873,13 @@
if (bttv_verbose) {
if (triton1)
- printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
+ pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n",
+ btv->c.nr);
if (vsfx && btv->id >= 878)
- printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
+ pr_info("%d: enabling VSFX\n", btv->c.nr);
if (UNSET != latency)
- printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
- btv->c.nr,latency);
+ pr_info("%d: setting pci timer to %d\n",
+ btv->c.nr, latency);
}
if (btv->id < 878) {