diff --git a/Documentation/Changes b/Documentation/Changes
index caa6a55..57542bc 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -357,14 +357,14 @@
 ----------
 o  <http://sourceforge.net/projects/linuxquota/>
 
-Jade
-----
-o  <ftp://ftp.jclark.com/pub/jade/jade-1.2.1.tar.gz>
-
 DocBook Stylesheets
 -------------------
 o  <http://nwalsh.com/docbook/dsssl/>
 
+XMLTO XSLT Frontend
+-------------------
+o  <http://cyberelk.net/tim/xmlto/>
+
 Intel P6 microcode
 ------------------
 o  <http://www.urbanmyth.org/microcode/>
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 393082c..a2441fa 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -41,14 +41,15 @@
 mandocs: $(MAN)
 
 installmandocs: mandocs
-	$(MAKEMAN) install Documentation/DocBook/man
+	mkdir -p /usr/local/man/man9/
+	install Documentation/DocBook/man/*.9.gz /usr/local/man/man9/
 
 ###
 #External programs used
 KERNELDOC = scripts/kernel-doc
 DOCPROC   = scripts/basic/docproc
-SPLITMAN  = $(PERL) $(srctree)/scripts/split-man
-MAKEMAN   = $(PERL) $(srctree)/scripts/makeman
+
+#XMLTOFLAGS = --skip-validation
 
 ###
 # DOCPROC is used for two purposes:
@@ -95,29 +96,29 @@
 # Rules to generate postscript, PDF and HTML
 # db2html creates a directory. Generate a html file used for timestamp
 
-quiet_cmd_db2ps = DB2PS   $@
-      cmd_db2ps = db2ps -o $(dir $@) $<
+quiet_cmd_db2ps = XMLTO    $@
+      cmd_db2ps = xmlto ps $(XMLTOFLAGS) -o $(dir $@) $<
 %.ps : %.xml
-	@(which db2ps > /dev/null 2>&1) || \
+	@(which xmlto > /dev/null 2>&1) || \
 	 (echo "*** You need to install DocBook stylesheets ***"; \
 	  exit 1)
 	$(call cmd,db2ps)
 
-quiet_cmd_db2pdf = DB2PDF  $@
-      cmd_db2pdf = db2pdf -o $(dir $@) $<
+quiet_cmd_db2pdf = XMLTO   $@
+      cmd_db2pdf = xmlto pdf $(XMLTOFLAGS) -o $(dir $@) $<
 %.pdf : %.xml
-	@(which db2pdf > /dev/null 2>&1) || \
+	@(which xmlto > /dev/null 2>&1) || \
 	 (echo "*** You need to install DocBook stylesheets ***"; \
 	  exit 1)
 	$(call cmd,db2pdf)
 
-quiet_cmd_db2html = DB2HTML $@
-      cmd_db2html = db2html -o $(patsubst %.html,%,$@) $< &&		      \
+quiet_cmd_db2html = XMLTO  $@
+      cmd_db2html = xmlto xhtml $(XMLTOFLAGS) -o $(patsubst %.html,%,$@) $< && \
 		echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/book1.html"> \
          Goto $(patsubst %.html,%,$(notdir $@))</a><p>' > $@
 
 %.html:	%.xml
-	@(which db2html > /dev/null 2>&1) || \
+	@(which xmlto > /dev/null 2>&1) || \
 	 (echo "*** You need to install DocBook stylesheets ***"; \
 	  exit 1)
 	@rm -rf $@ $(patsubst %.html,%,$@)
@@ -125,15 +126,14 @@
 	@if [ ! -z "$(PNG-$(basename $(notdir $@)))" ]; then \
             cp $(PNG-$(basename $(notdir $@))) $(patsubst %.html,%,$@); fi
 
-###
-# Rule to generate man files - output is placed in the man subdirectory
-
-%.9:	%.xml
-ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p $(objtree)/Documentation/DocBook/man
-endif
-	$(SPLITMAN) $< $(objtree)/Documentation/DocBook/man "$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)"
-	$(MAKEMAN) convert $(objtree)/Documentation/DocBook/man $<
+quiet_cmd_db2man = XMLTO   $@
+      cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man $< ; gzip -f $(obj)/man/*.9; fi
+%.9 : %.xml
+	@(which xmlto > /dev/null 2>&1) || \
+	 (echo "*** You need to install DocBook stylesheets ***"; \
+	  exit 1)
+	$(call cmd,db2man)
+	@touch $@
 
 ###
 # Rules to generate postscripts and PNG imgages from .fig format files
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 62bf9fe..0835dc2 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -581,8 +581,14 @@
     $id =~ s/[^A-Za-z0-9]/-/g;
 
     print "<refentry>\n";
+    print "<refentryinfo>\n";
+    print " <title>LINUX</title>\n";
+    print " <productname>Kernel Hackers Manual</productname>\n";
+    print " <date>$man_date</date>\n";
+    print "</refentryinfo>\n";
     print "<refmeta>\n";
-    print "<refentrytitle><phrase id=\"$id\">".$args{'function'}."</phrase></refentrytitle>\n";
+    print " <refentrytitle><phrase id=\"$id\">".$args{'function'}."</phrase></refentrytitle>\n";
+    print " <manvolnum>9</manvolnum>\n";
     print "</refmeta>\n";
     print "<refnamediv>\n";
     print " <refname>".$args{'function'}."</refname>\n";
@@ -651,8 +657,14 @@
     $id =~ s/[^A-Za-z0-9]/-/g;
 
     print "<refentry>\n";
+    print "<refentryinfo>\n";
+    print " <title>LINUX</title>\n";
+    print " <productname>Kernel Hackers Manual</productname>\n";
+    print " <date>$man_date</date>\n";
+    print "</refentryinfo>\n";
     print "<refmeta>\n";
-    print "<refentrytitle><phrase id=\"$id\">".$args{'type'}." ".$args{'struct'}."</phrase></refentrytitle>\n";
+    print " <refentrytitle><phrase id=\"$id\">".$args{'type'}." ".$args{'struct'}."</phrase></refentrytitle>\n";
+    print " <manvolnum>9</manvolnum>\n";
     print "</refmeta>\n";
     print "<refnamediv>\n";
     print " <refname>".$args{'type'}." ".$args{'struct'}."</refname>\n";
@@ -729,8 +741,14 @@
     $id =~ s/[^A-Za-z0-9]/-/g;
 
     print "<refentry>\n";
+    print "<refentryinfo>\n";
+    print " <title>LINUX</title>\n";
+    print " <productname>Kernel Hackers Manual</productname>\n";
+    print " <date>$man_date</date>\n";
+    print "</refentryinfo>\n";
     print "<refmeta>\n";
-    print "<refentrytitle><phrase id=\"$id\">enum ".$args{'enum'}."</phrase></refentrytitle>\n";
+    print " <refentrytitle><phrase id=\"$id\">enum ".$args{'enum'}."</phrase></refentrytitle>\n";
+    print " <manvolnum>9</manvolnum>\n";
     print "</refmeta>\n";
     print "<refnamediv>\n";
     print " <refname>enum ".$args{'enum'}."</refname>\n";
@@ -789,8 +807,14 @@
     $id =~ s/[^A-Za-z0-9]/-/g;
 
     print "<refentry>\n";
+    print "<refentryinfo>\n";
+    print " <title>LINUX</title>\n";
+    print " <productname>Kernel Hackers Manual</productname>\n";
+    print " <date>$man_date</date>\n";
+    print "</refentryinfo>\n";
     print "<refmeta>\n";
-    print "<refentrytitle><phrase id=\"$id\">typedef ".$args{'typedef'}."</phrase></refentrytitle>\n";
+    print " <refentrytitle><phrase id=\"$id\">typedef ".$args{'typedef'}."</phrase></refentrytitle>\n";
+    print " <manvolnum>9</manvolnum>\n";
     print "</refmeta>\n";
     print "<refnamediv>\n";
     print " <refname>typedef ".$args{'typedef'}."</refname>\n";
diff --git a/scripts/makeman b/scripts/makeman
deleted file mode 100755
index db3af64..0000000
--- a/scripts/makeman
+++ /dev/null
@@ -1,185 +0,0 @@
-#!/usr/bin/perl
-
-use strict;
-
-## Copyright (C) Michael Still (mikal@stillhq.com)
-## Released under the terms of the GNU GPL
-##
-## A script to make or install the manpages extracted by split-man
-##
-## Arguements: $1 -- the word "convert" or "install"
-##             $2 -- the directory containing the SGML files for the manpages
-##             $3 -- the filename which contained the sgmldoc output
-##                     (I need this so I know which manpages to convert)
-
-my($LISTING, $GENERATED, $INPUT, $OUTPUT, $front, $mode, $filename, $tmpdir);
-
-if($ARGV[0] eq ""){
-  die "Usage: makeman [convert | install] <dir> <file>\n";
-}
-
-if( ! -d "$ARGV[1]" ){
-  die "Output directory \"$ARGV[1]\" does not exist\n";
-}
-
-if($ENV{"TMPDIR"} ne ""){
-  $tmpdir = $ENV{"TMPDIR"};
-}
-else{
-  $tmpdir = "/tmp";
-}
-
-if($ARGV[0] eq "convert"){
-  open LISTING, "grep \"<refentrytitle>\" $ARGV[2] |";
-  while(<LISTING>){
-    s/<\/.*$//;
-    s/^.*>//;
-    s/\.sgml//;
-    s/struct //;
-    s/typedef //;
-
-    chomp;
-    $filename = $_;
-    print "Processing $filename\n";
-
-    # Open the input file to extract the front matter, generate the man page,
-    # and open it, and the rearrange everything until it is happy
-    open INPUT, "< $ARGV[1]/$filename.sgml";
-    $front = "";
-    $mode = 0;
-
-    # The modes used here are:
-    #                                                         mode = 0
-    # <!-- BEGINFRONTTAG -->
-    # <!-- <bookinfo>                                         mode = 1
-    # <!--   <legalnotice>                                    mode = 2
-    # <!--     ...GPL or whatever...
-    # <!--   </legalnotice>                                   mode = 4
-    # <!-- </bookinfo>                                        mode = 3
-    # <!-- ENDFRONTTAG -->
-    #
-    # ...doco...
-
-    # I know that some of the if statements in this while loop are in a funny
-    # order, but that is deliberate...
-    while(<INPUT>){
-      if($mode > 0){
-	s/<!-- //;
-	s/ -->//;
-	s/<docinfo>//i;
-	s<\/docinfo>//i;
-	s/^[ \t]*//i;
-      }
-
-      if($mode == 2){
-	if(/<para>/i){
-	}
-	elsif(/<\/para>/i){
-	  $front = "$front.\\\" \n";
-	}
-	elsif(/<\/legalnotice>/i){
-	  $mode = 4;
-	}
-	elsif(/^[ \t]*$/){
-	}
-	else{
-	  $front = "$front.\\\"     $_";
-	}
-      }
-
-      if($mode == 1){
-	if(/<title>(.*)<\/title>/i){
-	  $front = "$front.\\\" This documentation was generated from the book titled \"$1\", which is part of the Linux kernel source.\n.\\\" \n";
-	}
-	elsif(/<legalnotice>/i){
-	  $front = "$front.\\\" This documentation comes with the following legal notice:\n.\\\" \n";
-	  $mode = 2;
-	}
-
-	elsif(/<author>/i){
-	  $front = "$front.\\\" Documentation by: ";
-	}
-	elsif(/<firstname>(.*)<\/firstname>/i){
-	  $front = "$front$1 ";
-	}
-	elsif(/<surname>(.*)<\/surname>/i){
-	  $front = "$front$1 ";
-	}
-	elsif(/<email>(.*)<\/email>/i){
-	  $front = "$front($1)";
-	}
-	elsif(/\/author>/i){
-	  $front = "$front\n";
-	}
-
-	elsif(/<copyright>/i){
-	  $front = "$front.\\\" Documentation copyright: ";
-	}
-	elsif(/<holder>(.*)<\/holder>/i){
-	  $front = "$front$1 ";
-	}
-	elsif(/<year>(.*)<\/year>/i){
-	  $front = "$front$1 ";
-	}
-	elsif(/\/copyright>/i){
-	  $front = "$front\n";
-	}
-
-	elsif(/^[ \t]*$/
-	      || /<affiliation>/i
-	      || /<\/affiliation>/i
-	      || /<address>/i
-	      || /<\/address>/i
-	      || /<authorgroup>/i
-	      || /<\/authorgroup>/i
-	      || /<\/legalnotice>/i
-              || /<date>/i
-              || /<\/date>/i
-              || /<edition>/i
-              || /<\/edition>/i
-	      || /<pubdate>/i
-	      || /<\/pubdate>/i){
-	}
-	else{
-	  print "Unknown tag in manpage conversion: $_";
-	  }
-      }
-
-      if($mode == 0){
-	if(/<bookinfo>/i){
-	  $mode = 1;
-	}
-      }
-
-      if($mode == 4){
-	if(/<\/bookinfo>/i){
-	  $mode = 3;
-	}
-      }
-    }
-    close INPUT;
-
-    system("cd $ARGV[1]; docbook2man $filename.sgml; mv $filename.9 $tmpdir/$$.9\n");
-    open GENERATED, "< $tmpdir/$$.9";
-    open OUTPUT, "> $ARGV[1]/$filename.9";
-
-    print OUTPUT "$front";
-    print OUTPUT ".\\\" For comments on the formatting of this manpage, please contact Michael Still <mikal\@stillhq.com>\n\n";
-    while(<GENERATED>){
-      print OUTPUT "$_";
-    }
-    close OUTPUT;
-    close GENERATED;
-
-    system("gzip -f $ARGV[1]/$filename.9\n");
-    unlink("$tmpdir/$$.9");
-  }
-}
-elsif($ARGV[0] eq "install"){
-  system("mkdir -p /usr/local/man/man9/; install $ARGV[1]/*.9.gz /usr/local/man/man9/");
-}
-else{
-  die "Usage: makeman [convert | install] <dir> <file>\n";
-}
-
-print "Done\n";
diff --git a/scripts/split-man b/scripts/split-man
deleted file mode 100755
index 03897fe..0000000
--- a/scripts/split-man
+++ /dev/null
@@ -1,112 +0,0 @@
-#!/usr/bin/perl
-
-use strict;
-
-## Copyright (C) Michael Still (mikal@stillhq.com)
-## Released under the terms of the GNU GPL
-##
-## Hoon through the specified DocBook SGML file, and split out the
-## man pages. These can then be processed into groff format, and
-## installed if desired...
-##
-## Arguements: $1 -- the name of the sgml file
-##             $2 -- the directory to put the generated SGML files in
-##             $3 -- kernel version
-
-my($SGML, $REF, $front, $refdata, $mode, $filename);
-
-if(($ARGV[0] eq "") || ($ARGV[1] eq "") || ($ARGV[2] eq "")){
-  die "Usage: split-man <sgml file> <output dir> <kernel version>\n";
-}
-
-open SGML, "< $ARGV[0]" or die "Could not open input file \"$ARGV[0]\"\n";
-if( ! -d "$ARGV[1]" ){
-  die "Output directory \"$ARGV[1]\" does not exist\n";
-}
-
-# Possible modes:
-#   0: Looking for input I care about
-#   1: Inside book front matter
-#   2: Inside a refentry
-#   3: Inside a refentry, and we know the filename
-
-$mode = 0;
-$refdata = "";
-$front = "";
-while(<SGML>){
-  # Starting modes
-  if(/<bookinfo>/ || /<docinfo>/){
-    $mode = 1;
-  }
-  elsif(/<refentry>/){
-    $mode = 2;
-  }
-  elsif(/<refentrytitle><phrase[^>]*>([^<]*)<.*$/){
-    $mode = 3;
-    $filename = $1;
-
-    $filename =~ s/struct //;
-    $filename =~ s/typedef //;
-
-    print "Found manpage for $filename\n";
-    open REF, "> $ARGV[1]/$filename.sgml" or
-      die "Couldn't open output file \"$ARGV[1]/$filename.sgml\": $!\n";
-    print REF <<EOF;
-<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
-
-<!-- BEGINFRONTTAG: The following is front matter for the parent book -->
-$front
-<!-- ENDFRONTTAG: End front matter -->
-
-$refdata
-EOF
-    $refdata = "";
-  }
-
-  # Extraction
-  if($mode == 1){
-    chomp $_;
-    $front = "$front<!-- $_ -->\n";
-  }
-  elsif($mode == 2){
-    $refdata = "$refdata$_";
-  }
-  elsif($mode == 3){
-    # There are some fixups which need to be applied
-    if(/<\/refmeta>/){
-      print REF "<manvolnum>9</manvolnum>\n";
-    }
-    if(/<\/refentry>/){
-      print REF <<EOF;
-<refsect1><title>About this document</title>
-<para>
-This documentation was generated with kernel version $ARGV[2].
-</para>
-</refsect1>
-EOF
-    }
-
-    # For some reason, we title the synopsis twice in the main DocBook
-    if(! /<title>Synopsis<\/title>/){
-      if(/<refentrytitle>/){
-	s/struct //;
-	s/typedef //;
-      }
-
-      print REF "$_";
-    }
-  }
-
-  # Ending modes
-  if(/<\/bookinfo>/ || /<\/docinfo>/){
-    $mode = 0;
-  }
-  elsif(/<\/refentry>/){
-    $mode = 0;
-    close REF;
-  }
-}
-
-# And make sure we don't process this unnessesarily
-$ARGV[0] =~ s/\.sgml/.9/;
-`touch $ARGV[0]`;