Merge tag 'v3.12-pwm-cleanup-for-olof' of git://github.com/tom3q/linux into next/cleanup
From Tomasz Figa:
Here is the Samsung PWM cleanup series. Particular patches of the series
involve following modifications:
- fixing up few things in samsung_pwm_timer clocksource driver,
- moving remaining Samsung platforms to the new clocksource driver,
- removing old clocksource driver,
- adding new multiplatform- and DT-aware PWM driver,
- moving all Samsung platforms to use the new PWM driver,
- removing old PWM driver,
- removing all PWM-related code that is not used anymore.
* tag 'v3.12-pwm-cleanup-for-olof' of git://github.com/tom3q/linux: (684 commits)
ARM: SAMSUNG: Remove plat/regs-timer.h header
ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header
ARM: SAMSUNG: Remove pwm-clock infrastructure
ARM: SAMSUNG: Remove old PWM timer platform devices
pwm: Remove superseded pwm-samsung-legacy driver
ARM: SAMSUNG: Modify board files to use new PWM platform device
ARM: SAMSUNG: Rework private data handling in dev-backlight
pwm: Add new pwm-samsung driver
pwm: samsung: Rename to pwm-samsung-legacy
ARM: SAMSUNG: Remove unused PWM timer IRQ chip code
ARM: SAMSUNG: Remove old samsung-time driver
ARM: SAMSUNG: Move all platforms to new clocksource driver
ARM: SAMSUNG: Set PWM platform data
ARM: SAMSUNG: Add new PWM platform device
ARM: SAMSUNG: Unify base address definitions of timer block
clocksource: samsung_pwm_timer: Handle suspend/resume correctly
clocksource: samsung_pwm_timer: Do not use clocksource_mmio
clocksource: samsung_pwm_timer: Cache clocksource register address
clocksource: samsung_pwm_timer: Correct definition of AUTORELOAD bit
clocksource: samsung_pwm_timer: Do not request PWM mem region
+ v3.11-rc4
Conflicts:
arch/arm/Kconfig.debug
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 944fd5a..39119d6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -20,7 +20,6 @@
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select HARDIRQS_SW_RESEND
- select HAVE_AOUT
select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
select HAVE_ARCH_KGDB
select HAVE_ARCH_SECCOMP_FILTER
@@ -218,7 +217,8 @@
default DRAM_BASE if REMAP_VECTORS_TO_RAM
default 0x00000000
help
- The base address of exception vectors.
+ The base address of exception vectors. This must be two pages
+ in size.
config ARM_PATCH_PHYS_VIRT
bool "Patch physical to virtual translations at runtime" if EMBEDDED
@@ -701,7 +701,7 @@
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
- select CLKSRC_MMIO
+ select CLKSRC_SAMSUNG_PWM
select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
select HAVE_CLK
@@ -724,7 +724,7 @@
select ARCH_REQUIRE_GPIOLIB
select ARM_VIC
select CLKDEV_LOOKUP
- select CLKSRC_MMIO
+ select CLKSRC_SAMSUNG_PWM
select CPU_V6
select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
@@ -740,7 +740,6 @@
select SAMSUNG_ATAGS
select SAMSUNG_CLKSRC
select SAMSUNG_GPIOLIB_4BIT
- select SAMSUNG_IRQ_VIC_TIMER
select SAMSUNG_WDT_RESET
select USB_ARCH_HAS_OHCI
help
@@ -749,7 +748,7 @@
config ARCH_S5P64X0
bool "Samsung S5P6440 S5P6450"
select CLKDEV_LOOKUP
- select CLKSRC_MMIO
+ select CLKSRC_SAMSUNG_PWM
select CPU_V6
select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
@@ -768,7 +767,7 @@
bool "Samsung S5PC100"
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
- select CLKSRC_MMIO
+ select CLKSRC_SAMSUNG_PWM
select CPU_V7
select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
@@ -788,7 +787,7 @@
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_SPARSEMEM_ENABLE
select CLKDEV_LOOKUP
- select CLKSRC_MMIO
+ select CLKSRC_SAMSUNG_PWM
select CPU_V7
select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
@@ -1591,8 +1590,7 @@
config ARCH_NR_GPIO
int
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
- default 512 if SOC_OMAP5
- default 512 if ARCH_KEYSTONE
+ default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5
default 392 if ARCH_U8500
default 352 if ARCH_VT8500
default 288 if ARCH_SUNXI
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 4a62a8d..1533783 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -809,9 +809,19 @@
config DEBUG_UNCOMPRESS
bool
- default y if (ARCH_MULTIPLATFORM || ARCH_MSM) && DEBUG_LL && \
- !DEBUG_OMAP2PLUS_UART && \
+ depends on ARCH_MULTIPLATFORM || ARCH_MSM
+ default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
!DEBUG_TEGRA_UART
+ help
+ This option influences the normal decompressor output for
+ multiplatform kernels. Normally, multiplatform kernels disable
+ decompressor output because it is not possible to know where to
+ send the decompressor output.
+
+ When this option is set, the selected DEBUG_LL output method
+ will be re-used for normal decompressor output on multiplatform
+ kernels.
+
config UNCOMPRESS_INCLUDE
string
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c0ac0f5..6fd2cea 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -153,6 +153,7 @@
machine-$(CONFIG_ARCH_DOVE) += dove
machine-$(CONFIG_ARCH_EBSA110) += ebsa110
machine-$(CONFIG_ARCH_EP93XX) += ep93xx
+machine-$(CONFIG_ARCH_EXYNOS) += exynos
machine-$(CONFIG_ARCH_GEMINI) += gemini
machine-$(CONFIG_ARCH_HIGHBANK) += highbank
machine-$(CONFIG_ARCH_INTEGRATOR) += integrator
@@ -160,15 +161,16 @@
machine-$(CONFIG_ARCH_IOP32X) += iop32x
machine-$(CONFIG_ARCH_IOP33X) += iop33x
machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx
+machine-$(CONFIG_ARCH_KEYSTONE) += keystone
machine-$(CONFIG_ARCH_KIRKWOOD) += kirkwood
machine-$(CONFIG_ARCH_KS8695) += ks8695
machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
machine-$(CONFIG_ARCH_MMP) += mmp
machine-$(CONFIG_ARCH_MSM) += msm
machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0
+machine-$(CONFIG_ARCH_MVEBU) += mvebu
machine-$(CONFIG_ARCH_MXC) += imx
machine-$(CONFIG_ARCH_MXS) += mxs
-machine-$(CONFIG_ARCH_MVEBU) += mvebu
machine-$(CONFIG_ARCH_NETX) += netx
machine-$(CONFIG_ARCH_NOMADIK) += nomadik
machine-$(CONFIG_ARCH_NSPIRE) += nspire
@@ -176,7 +178,6 @@
machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
machine-$(CONFIG_ARCH_ORION5X) += orion5x
machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
-machine-$(CONFIG_ARCH_SIRF) += prima2
machine-$(CONFIG_ARCH_PXA) += pxa
machine-$(CONFIG_ARCH_REALVIEW) += realview
machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
@@ -186,25 +187,24 @@
machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0
machine-$(CONFIG_ARCH_S5PC100) += s5pc100
machine-$(CONFIG_ARCH_S5PV210) += s5pv210
-machine-$(CONFIG_ARCH_EXYNOS) += exynos
machine-$(CONFIG_ARCH_SA1100) += sa1100
machine-$(CONFIG_ARCH_SHARK) += shark
machine-$(CONFIG_ARCH_SHMOBILE) += shmobile
+machine-$(CONFIG_ARCH_SIRF) += prima2
+machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
+machine-$(CONFIG_ARCH_STI) += sti
+machine-$(CONFIG_ARCH_SUNXI) += sunxi
machine-$(CONFIG_ARCH_TEGRA) += tegra
machine-$(CONFIG_ARCH_U300) += u300
machine-$(CONFIG_ARCH_U8500) += ux500
machine-$(CONFIG_ARCH_VERSATILE) += versatile
machine-$(CONFIG_ARCH_VEXPRESS) += vexpress
+machine-$(CONFIG_ARCH_VIRT) += virt
machine-$(CONFIG_ARCH_VT8500) += vt8500
machine-$(CONFIG_ARCH_W90X900) += w90x900
-machine-$(CONFIG_FOOTBRIDGE) += footbridge
-machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
-machine-$(CONFIG_PLAT_SPEAR) += spear
-machine-$(CONFIG_ARCH_STI) += sti
-machine-$(CONFIG_ARCH_VIRT) += virt
machine-$(CONFIG_ARCH_ZYNQ) += zynq
-machine-$(CONFIG_ARCH_SUNXI) += sunxi
-machine-$(CONFIG_ARCH_KEYSTONE) += keystone
+machine-$(CONFIG_FOOTBRIDGE) += footbridge
+machine-$(CONFIG_PLAT_SPEAR) += spear
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi
index 9866cd7..a0f2721 100644
--- a/arch/arm/boot/dts/atlas6.dtsi
+++ b/arch/arm/boot/dts/atlas6.dtsi
@@ -485,6 +485,12 @@
sirf,function = "usp0";
};
};
+ usp0_uart_nostreamctrl_pins_a: usp0@1 {
+ usp0 {
+ sirf,pins = "usp0_uart_nostreamctrl_grp";
+ sirf,function = "usp0_uart_nostreamctrl";
+ };
+ };
usp1_pins_a: usp1@0 {
usp1 {
sirf,pins = "usp1grp";
@@ -515,16 +521,16 @@
sirf,function = "pulse_count";
};
};
- cko0_rst_pins_a: cko0_rst@0 {
- cko0_rst {
- sirf,pins = "cko0_rstgrp";
- sirf,function = "cko0_rst";
+ cko0_pins_a: cko0@0 {
+ cko0 {
+ sirf,pins = "cko0grp";
+ sirf,function = "cko0";
};
};
- cko1_rst_pins_a: cko1_rst@0 {
- cko1_rst {
- sirf,pins = "cko1_rstgrp";
- sirf,function = "cko1_rst";
+ cko1_pins_a: cko1@0 {
+ cko1 {
+ sirf,pins = "cko1grp";
+ sirf,function = "cko1";
};
};
};
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index 43bf3c7..0e7fed4 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -147,7 +147,7 @@
reg = <0x0a>;
VDDA-supply = <®_3p3v>;
VDDIO-supply = <®_3p3v>;
-
+ clocks = <&saif0>;
};
pcf8563: rtc@51 {
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 1f0d38d..e035f46 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -195,7 +195,7 @@
reg = <0x0a>;
VDDA-supply = <®_3p3v>;
VDDIO-supply = <®_3p3v>;
-
+ clocks = <&saif0>;
};
at24@51 {
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 880df2f..44d9da5 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -184,7 +184,7 @@
reg = <0x0a>;
VDDA-supply = <®_3p3v>;
VDDIO-supply = <®_3p3v>;
-
+ clocks = <&saif0>;
};
eeprom: eeprom@51 {
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 6a8acb0..9524a05 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -837,6 +837,7 @@
compatible = "fsl,imx28-saif";
reg = <0x80042000 0x2000>;
interrupts = <59 80>;
+ #clock-cells = <0>;
clocks = <&clks 53>;
dmas = <&dma_apbx 4>;
dma-names = "rx-tx";
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 6dd9486..ad3471c 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -61,6 +61,16 @@
mux-int-port = <2>;
mux-ext-port = <3>;
};
+
+ clocks {
+ clk_26M: codec_clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ gpios = <&gpio4 26 1>;
+ };
+ };
};
&esdhc1 {
@@ -229,6 +239,7 @@
MX51_PAD_EIM_A27__GPIO2_21 0x5
MX51_PAD_CSPI1_SS0__GPIO4_24 0x85
MX51_PAD_CSPI1_SS1__GPIO4_25 0x85
+ MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000
>;
};
};
@@ -255,7 +266,7 @@
sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- clock-frequency = <26000000>;
+ clocks = <&clk_26M>;
VDDA-supply = <&vdig_reg>;
VDDIO-supply = <&vvideo_reg>;
};
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index aaa33bc..a630902 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -27,7 +27,7 @@
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm2 0 50000 0 0>;
+ pwms = <&pwm2 0 50000>;
brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
default-brightness-level = <10>;
enable-gpios = <&gpio7 7 0>;
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 3895fbb..569aa9f 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -725,15 +725,15 @@
uart1 {
pinctrl_uart1_1: uart1grp-1 {
fsl,pins = <
- MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1c5
- MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1c5
+ MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
+ MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4
>;
};
pinctrl_uart1_2: uart1grp-2 {
fsl,pins = <
- MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1c5
- MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1c5
+ MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
+ MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
>;
};
@@ -748,8 +748,8 @@
uart2 {
pinctrl_uart2_1: uart2grp-1 {
fsl,pins = <
- MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5
- MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5
+ MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
+ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
>;
};
@@ -766,17 +766,17 @@
uart3 {
pinctrl_uart3_1: uart3grp-1 {
fsl,pins = <
- MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5
- MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5
- MX53_PAD_PATA_DA_1__UART3_CTS 0x1c5
- MX53_PAD_PATA_DA_2__UART3_RTS 0x1c5
+ MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+ MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
+ MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4
+ MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4
>;
};
pinctrl_uart3_2: uart3grp-2 {
fsl,pins = <
- MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5
- MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5
+ MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+ MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
>;
};
@@ -785,8 +785,8 @@
uart4 {
pinctrl_uart4_1: uart4grp-1 {
fsl,pins = <
- MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1c5
- MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1c5
+ MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4
+ MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4
>;
};
};
@@ -794,8 +794,8 @@
uart5 {
pinctrl_uart5_1: uart5grp-1 {
fsl,pins = <
- MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1c5
- MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1c5
+ MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4
+ MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4
>;
};
};
diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
index 05e9489..bbeb623 100644
--- a/arch/arm/boot/dts/prima2.dtsi
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -515,16 +515,16 @@
sirf,function = "pulse_count";
};
};
- cko0_rst_pins_a: cko0_rst@0 {
- cko0_rst {
- sirf,pins = "cko0_rstgrp";
- sirf,function = "cko0_rst";
+ cko0_pins_a: cko0@0 {
+ cko0 {
+ sirf,pins = "cko0grp";
+ sirf,function = "cko0";
};
};
- cko1_rst_pins_a: cko1_rst@0 {
- cko1_rst {
- sirf,pins = "cko1_rstgrp";
- sirf,function = "cko1_rst";
+ cko1_pins_a: cko1@0 {
+ cko1 {
+ sirf,pins = "cko1grp";
+ sirf,function = "cko1";
};
};
};
diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi
index 957b21a..0f246c9 100644
--- a/arch/arm/boot/dts/stih416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
@@ -166,6 +166,15 @@
reg = <0x9000 0x100>;
st,bank-name = "PIO31";
};
+
+ serial2-oe {
+ pinctrl_serial2_oe: serial2-1 {
+ st,pins {
+ output-enable = <&PIO11 3 ALT2 OUT>;
+ };
+ };
+ };
+
};
pin-controller-rear {
@@ -218,7 +227,6 @@
st,pins {
tx = <&PIO17 4 ALT2 OUT>;
rx = <&PIO17 5 ALT2 IN>;
- output-enable = <&PIO11 3 ALT2 OUT>;
};
};
};
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index 3cecd96..1a0326e 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -79,7 +79,7 @@
interrupts = <0 197 0>;
clocks = <&CLK_S_ICN_REG_0>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_serial2>;
+ pinctrl-0 = <&pinctrl_serial2 &pinctrl_serial2_oe>;
};
/* SBC_UART1 */
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index b3034da..ae6a17a 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -47,6 +47,12 @@
regulator-max-microvolt = <3150000>;
};
+ vmmc2: regulator-vmmc2 {
+ compatible = "ti,twl4030-vmmc2";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <3150000>;
+ };
+
vusb1v5: regulator-vusb1v5 {
compatible = "ti,twl4030-vusb1v5";
};
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index e1eb7da..67d929c 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -442,8 +442,8 @@
compatible = "fsl,mvf600-fec";
reg = <0x400d0000 0x1000>;
interrupts = <0 78 0x04>;
- clocks = <&clks VF610_CLK_ENET>,
- <&clks VF610_CLK_ENET>,
+ clocks = <&clks VF610_CLK_ENET0>,
+ <&clks VF610_CLK_ENET0>,
<&clks VF610_CLK_ENET>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
@@ -453,8 +453,8 @@
compatible = "fsl,mvf600-fec";
reg = <0x400d1000 0x1000>;
interrupts = <0 79 0x04>;
- clocks = <&clks VF610_CLK_ENET>,
- <&clks VF610_CLK_ENET>,
+ clocks = <&clks VF610_CLK_ENET1>,
+ <&clks VF610_CLK_ENET1>,
<&clks VF610_CLK_ENET>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index a432e6c..39ad030 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -26,7 +26,6 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/edma.h>
-#include <linux/err.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_dma.h>
diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig
index 7c86813..1571bea 100644
--- a/arch/arm/configs/da8xx_omapl_defconfig
+++ b/arch/arm/configs/da8xx_omapl_defconfig
@@ -102,6 +102,8 @@
CONFIG_SND_DAVINCI_SOC=m
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
+CONFIG_DMADEVICES=y
+CONFIG_TI_EDMA=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_XFS_FS=m
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index c86fd75..ab2f737 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -162,6 +162,8 @@
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_TI_EDMA=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_XFS_FS=m
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index fe0bdc3..6e572c6 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -53,6 +53,7 @@
CONFIG_IP_PNP_DHCP=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_OMAP_OCP2SCP=y
CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
CONFIG_SATA_AHCI_PLATFORM=y
@@ -61,6 +62,7 @@
CONFIG_NETDEVICES=y
CONFIG_SUN4I_EMAC=y
CONFIG_NET_CALXEDA_XGMAC=y
+CONFIG_KS8851=y
CONFIG_SMSC911X=y
CONFIG_STMMAC_ETH=y
CONFIG_MDIO_SUN4I=y
@@ -89,6 +91,7 @@
CONFIG_I2C_SIRF=y
CONFIG_I2C_TEGRA=y
CONFIG_SPI=y
+CONFIG_SPI_OMAP24XX=y
CONFIG_SPI_PL022=y
CONFIG_SPI_SIRF=y
CONFIG_SPI_TEGRA114=y
@@ -111,11 +114,12 @@
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
CONFIG_USB_EHCI_TEGRA=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_AB8500_USB=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_OMAP_USB2=y
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index 35f8cf2..263ae38 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -1,6 +1,8 @@
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -48,7 +50,6 @@
CONFIG_MTD=y
CONFIG_MTD_TESTS=m
CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=y
@@ -94,8 +95,10 @@
CONFIG_I2C_NOMADIK=y
CONFIG_DEBUG_GPIO=y
# CONFIG_HWMON is not set
+CONFIG_REGULATOR=y
CONFIG_MMC=y
-CONFIG_MMC_CLKGATE=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
diff --git a/arch/arm/include/asm/a.out-core.h b/arch/arm/include/asm/a.out-core.h
deleted file mode 100644
index 92f10cb..0000000
--- a/arch/arm/include/asm/a.out-core.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* a.out coredump register dumper
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_A_OUT_CORE_H
-#define _ASM_A_OUT_CORE_H
-
-#ifdef __KERNEL__
-
-#include <linux/user.h>
-#include <linux/elfcore.h>
-
-/*
- * fill in the user structure for an a.out core dump
- */
-static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
-{
- struct task_struct *tsk = current;
-
- dump->magic = CMAGIC;
- dump->start_code = tsk->mm->start_code;
- dump->start_stack = regs->ARM_sp & ~(PAGE_SIZE - 1);
-
- dump->u_tsize = (tsk->mm->end_code - tsk->mm->start_code) >> PAGE_SHIFT;
- dump->u_dsize = (tsk->mm->brk - tsk->mm->start_data + PAGE_SIZE - 1) >> PAGE_SHIFT;
- dump->u_ssize = 0;
-
- memset(dump->u_debugreg, 0, sizeof(dump->u_debugreg));
-
- if (dump->start_stack < 0x04000000)
- dump->u_ssize = (0x04000000 - dump->start_stack) >> PAGE_SHIFT;
-
- dump->regs = *regs;
- dump->u_fpvalid = dump_fpu (regs, &dump->u_fp);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_A_OUT_CORE_H */
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 8c25dc4..9672e97 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -89,13 +89,18 @@
__val; \
})
+/*
+ * The memory clobber prevents gcc 4.5 from reordering the mrc before
+ * any is_smp() tests, which can cause undefined instruction aborts on
+ * ARM1136 r0 due to the missing extended CP15 registers.
+ */
#define read_cpuid_ext(ext_reg) \
({ \
unsigned int __val; \
asm("mrc p15, 0, %0, c0, " ext_reg \
: "=r" (__val) \
: \
- : "cc"); \
+ : "memory"); \
__val; \
})
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index 38050b1..56211f2 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -130,4 +130,10 @@
extern unsigned long arch_randomize_brk(struct mm_struct *mm);
#define arch_randomize_brk arch_randomize_brk
+#ifdef CONFIG_MMU
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
+struct linux_binprm;
+int arch_setup_additional_pages(struct linux_binprm *, int);
+#endif
+
#endif
diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h
index e3d5554..6f18da0 100644
--- a/arch/arm/include/asm/mmu.h
+++ b/arch/arm/include/asm/mmu.h
@@ -6,8 +6,11 @@
typedef struct {
#ifdef CONFIG_CPU_HAS_ASID
atomic64_t id;
+#else
+ int switch_pending;
#endif
unsigned int vmalloc_seq;
+ unsigned long sigpage;
} mm_context_t;
#ifdef CONFIG_CPU_HAS_ASID
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index b5792b7..9b32f76 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -56,7 +56,7 @@
* on non-ASID CPUs, the old mm will remain valid until the
* finish_arch_post_lock_switch() call.
*/
- set_ti_thread_flag(task_thread_info(tsk), TIF_SWITCH_MM);
+ mm->context.switch_pending = 1;
else
cpu_switch_mm(mm->pgd, mm);
}
@@ -65,9 +65,21 @@
finish_arch_post_lock_switch
static inline void finish_arch_post_lock_switch(void)
{
- if (test_and_clear_thread_flag(TIF_SWITCH_MM)) {
- struct mm_struct *mm = current->mm;
- cpu_switch_mm(mm->pgd, mm);
+ struct mm_struct *mm = current->mm;
+
+ if (mm && mm->context.switch_pending) {
+ /*
+ * Preemption must be disabled during cpu_switch_mm() as we
+ * have some stateful cache flush implementations. Check
+ * switch_pending again in case we were preempted and the
+ * switch to this mm was already done.
+ */
+ preempt_disable();
+ if (mm->context.switch_pending) {
+ mm->context.switch_pending = 0;
+ cpu_switch_mm(mm->pgd, mm);
+ }
+ preempt_enable_no_resched();
}
}
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index 6363f3d..4355f0e 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -142,7 +142,9 @@
#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
extern void copy_page(void *to, const void *from);
+#ifdef CONFIG_KUSER_HELPERS
#define __HAVE_ARCH_GATE_AREA 1
+#endif
#ifdef CONFIG_ARM_LPAE
#include <asm/pgtable-3level-types.h>
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 06e7d50..413f387 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -54,7 +54,6 @@
#define start_thread(regs,pc,sp) \
({ \
- unsigned long *stack = (unsigned long *)sp; \
memset(regs->uregs, 0, sizeof(regs->uregs)); \
if (current->personality & ADDR_LIMIT_32BIT) \
regs->ARM_cpsr = USR_MODE; \
@@ -65,9 +64,6 @@
regs->ARM_cpsr |= PSR_ENDSTATE; \
regs->ARM_pc = pc & ~1; /* pc */ \
regs->ARM_sp = sp; /* sp */ \
- regs->ARM_r2 = stack[2]; /* r2 (envp) */ \
- regs->ARM_r1 = stack[1]; /* r1 (argv) */ \
- regs->ARM_r0 = stack[0]; /* r0 (argc) */ \
nommu_start_thread(regs); \
})
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 214d415..2b8114f 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -156,7 +156,6 @@
#define TIF_USING_IWMMXT 17
#define TIF_MEMDIE 18 /* is terminating due to OOM killer */
#define TIF_RESTORE_SIGMASK 20
-#define TIF_SWITCH_MM 22 /* deferred switch_mm */
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index fdbb9e3..f467e9b 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -443,7 +443,18 @@
isb();
}
+#include <asm/cputype.h>
#ifdef CONFIG_ARM_ERRATA_798181
+static inline int erratum_a15_798181(void)
+{
+ unsigned int midr = read_cpuid_id();
+
+ /* Cortex-A15 r0p0..r3p2 affected */
+ if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2)
+ return 0;
+ return 1;
+}
+
static inline void dummy_flush_tlb_a15_erratum(void)
{
/*
@@ -453,6 +464,11 @@
dsb();
}
#else
+static inline int erratum_a15_798181(void)
+{
+ return 0;
+}
+
static inline void dummy_flush_tlb_a15_erratum(void)
{
}
diff --git a/arch/arm/include/asm/virt.h b/arch/arm/include/asm/virt.h
index 50af92b..4371f45 100644
--- a/arch/arm/include/asm/virt.h
+++ b/arch/arm/include/asm/virt.h
@@ -29,6 +29,7 @@
#define BOOT_CPU_MODE_MISMATCH PSR_N_BIT
#ifndef __ASSEMBLY__
+#include <asm/cacheflush.h>
#ifdef CONFIG_ARM_VIRT_EXT
/*
@@ -41,10 +42,21 @@
*/
extern int __boot_cpu_mode;
+static inline void sync_boot_mode(void)
+{
+ /*
+ * As secondaries write to __boot_cpu_mode with caches disabled, we
+ * must flush the corresponding cache entries to ensure the visibility
+ * of their writes.
+ */
+ sync_cache_r(&__boot_cpu_mode);
+}
+
void __hyp_set_vectors(unsigned long phys_vector_base);
unsigned long __hyp_get_vectors(void);
#else
#define __boot_cpu_mode (SVC_MODE)
+#define sync_boot_mode()
#endif
#ifndef ZIMAGE
diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild
index 47bcb2d..18d76fd 100644
--- a/arch/arm/include/uapi/asm/Kbuild
+++ b/arch/arm/include/uapi/asm/Kbuild
@@ -1,7 +1,6 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += a.out.h
header-y += byteorder.h
header-y += fcntl.h
header-y += hwcap.h
diff --git a/arch/arm/include/uapi/asm/a.out.h b/arch/arm/include/uapi/asm/a.out.h
deleted file mode 100644
index 083894b..0000000
--- a/arch/arm/include/uapi/asm/a.out.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __ARM_A_OUT_H__
-#define __ARM_A_OUT_H__
-
-#include <linux/personality.h>
-#include <linux/types.h>
-
-struct exec
-{
- __u32 a_info; /* Use macros N_MAGIC, etc for access */
- __u32 a_text; /* length of text, in bytes */
- __u32 a_data; /* length of data, in bytes */
- __u32 a_bss; /* length of uninitialized data area for file, in bytes */
- __u32 a_syms; /* length of symbol table data in file, in bytes */
- __u32 a_entry; /* start address */
- __u32 a_trsize; /* length of relocation info for text, in bytes */
- __u32 a_drsize; /* length of relocation info for data, in bytes */
-};
-
-/*
- * This is always the same
- */
-#define N_TXTADDR(a) (0x00008000)
-
-#define N_TRSIZE(a) ((a).a_trsize)
-#define N_DRSIZE(a) ((a).a_drsize)
-#define N_SYMSIZE(a) ((a).a_syms)
-
-#define M_ARM 103
-
-#ifndef LIBRARY_START_TEXT
-#define LIBRARY_START_TEXT (0x00c00000)
-#endif
-
-#endif /* __A_OUT_GNU_H__ */
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index a39cfc2a1..d40d0ef 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -742,6 +742,18 @@
#endif
.endm
+ .macro kuser_pad, sym, size
+ .if (. - \sym) & 3
+ .rept 4 - (. - \sym) & 3
+ .byte 0
+ .endr
+ .endif
+ .rept (\size - (. - \sym)) / 4
+ .word 0xe7fddef1
+ .endr
+ .endm
+
+#ifdef CONFIG_KUSER_HELPERS
.align 5
.globl __kuser_helper_start
__kuser_helper_start:
@@ -832,18 +844,13 @@
#error "incoherent kernel configuration"
#endif
- /* pad to next slot */
- .rept (16 - (. - __kuser_cmpxchg64)/4)
- .word 0
- .endr
-
- .align 5
+ kuser_pad __kuser_cmpxchg64, 64
__kuser_memory_barrier: @ 0xffff0fa0
smp_dmb arm
usr_ret lr
- .align 5
+ kuser_pad __kuser_memory_barrier, 32
__kuser_cmpxchg: @ 0xffff0fc0
@@ -916,13 +923,14 @@
#endif
- .align 5
+ kuser_pad __kuser_cmpxchg, 32
__kuser_get_tls: @ 0xffff0fe0
ldr r0, [pc, #(16 - 8)] @ read TLS, set in kuser_get_tls_init
usr_ret lr
mrc p15, 0, r0, c13, c0, 3 @ 0xffff0fe8 hardware TLS code
- .rep 4
+ kuser_pad __kuser_get_tls, 16
+ .rep 3
.word 0 @ 0xffff0ff0 software TLS value, then
.endr @ pad up to __kuser_helper_version
@@ -932,14 +940,16 @@
.globl __kuser_helper_end
__kuser_helper_end:
+#endif
+
THUMB( .thumb )
/*
* Vector stubs.
*
- * This code is copied to 0xffff0200 so we can use branches in the
- * vectors, rather than ldr's. Note that this code must not
- * exceed 0x300 bytes.
+ * This code is copied to 0xffff1000 so we can use branches in the
+ * vectors, rather than ldr's. Note that this code must not exceed
+ * a page size.
*
* Common stub entry macro:
* Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
@@ -986,8 +996,17 @@
1:
.endm
- .globl __stubs_start
+ .section .stubs, "ax", %progbits
__stubs_start:
+ @ This must be the first word
+ .word vector_swi
+
+vector_rst:
+ ARM( swi SYS_ERROR0 )
+ THUMB( svc #0 )
+ THUMB( nop )
+ b vector_und
+
/*
* Interrupt dispatcher
*/
@@ -1082,6 +1101,16 @@
.align 5
/*=============================================================================
+ * Address exception handler
+ *-----------------------------------------------------------------------------
+ * These aren't too critical.
+ * (they're not supposed to happen, and won't happen in 32-bit data mode).
+ */
+
+vector_addrexcptn:
+ b vector_addrexcptn
+
+/*=============================================================================
* Undefined FIQs
*-----------------------------------------------------------------------------
* Enter in FIQ mode, spsr = ANY CPSR, lr = ANY PC
@@ -1094,45 +1123,19 @@
vector_fiq:
subs pc, lr, #4
-/*=============================================================================
- * Address exception handler
- *-----------------------------------------------------------------------------
- * These aren't too critical.
- * (they're not supposed to happen, and won't happen in 32-bit data mode).
- */
+ .globl vector_fiq_offset
+ .equ vector_fiq_offset, vector_fiq
-vector_addrexcptn:
- b vector_addrexcptn
-
-/*
- * We group all the following data together to optimise
- * for CPUs with separate I & D caches.
- */
- .align 5
-
-.LCvswi:
- .word vector_swi
-
- .globl __stubs_end
-__stubs_end:
-
- .equ stubs_offset, __vectors_start + 0x200 - __stubs_start
-
- .globl __vectors_start
+ .section .vectors, "ax", %progbits
__vectors_start:
- ARM( swi SYS_ERROR0 )
- THUMB( svc #0 )
- THUMB( nop )
- W(b) vector_und + stubs_offset
- W(ldr) pc, .LCvswi + stubs_offset
- W(b) vector_pabt + stubs_offset
- W(b) vector_dabt + stubs_offset
- W(b) vector_addrexcptn + stubs_offset
- W(b) vector_irq + stubs_offset
- W(b) vector_fiq + stubs_offset
-
- .globl __vectors_end
-__vectors_end:
+ W(b) vector_rst
+ W(b) vector_und
+ W(ldr) pc, __vectors_start + 0x1000
+ W(b) vector_pabt
+ W(b) vector_dabt
+ W(b) vector_addrexcptn
+ W(b) vector_irq
+ W(b) vector_fiq
.data
diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S
index e00621f..52b2643 100644
--- a/arch/arm/kernel/entry-v7m.S
+++ b/arch/arm/kernel/entry-v7m.S
@@ -49,7 +49,7 @@
mov r1, sp
stmdb sp!, {lr}
@ routine called with r0 = irq number, r1 = struct pt_regs *
- bl nvic_do_IRQ
+ bl nvic_handle_irq
pop {lr}
@
diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c
index 2adda11..25442f4 100644
--- a/arch/arm/kernel/fiq.c
+++ b/arch/arm/kernel/fiq.c
@@ -47,6 +47,11 @@
#include <asm/irq.h>
#include <asm/traps.h>
+#define FIQ_OFFSET ({ \
+ extern void *vector_fiq_offset; \
+ (unsigned)&vector_fiq_offset; \
+ })
+
static unsigned long no_fiq_insn;
/* Default reacquire function
@@ -80,13 +85,16 @@
void set_fiq_handler(void *start, unsigned int length)
{
#if defined(CONFIG_CPU_USE_DOMAINS)
- memcpy((void *)0xffff001c, start, length);
+ void *base = (void *)0xffff0000;
#else
- memcpy(vectors_page + 0x1c, start, length);
+ void *base = vectors_page;
#endif
- flush_icache_range(0xffff001c, 0xffff001c + length);
+ unsigned offset = FIQ_OFFSET;
+
+ memcpy(base + offset, start, length);
+ flush_icache_range(0xffff0000 + offset, 0xffff0000 + offset + length);
if (!vectors_high())
- flush_icache_range(0x1c, 0x1c + length);
+ flush_icache_range(offset, offset + length);
}
int claim_fiq(struct fiq_handler *f)
@@ -144,6 +152,7 @@
void __init init_FIQ(int start)
{
- no_fiq_insn = *(unsigned long *)0xffff001c;
+ unsigned offset = FIQ_OFFSET;
+ no_fiq_insn = *(unsigned long *)(0xffff0000 + offset);
fiq_start = start;
}
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index b361de1..14235ba 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -87,6 +87,7 @@
ENDPROC(stext)
#ifdef CONFIG_SMP
+ .text
ENTRY(secondary_startup)
/*
* Common entry point for secondary CPUs.
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 9cf6063..2c7cc1e 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -343,6 +343,7 @@
.long __turn_mmu_on_end
#if defined(CONFIG_SMP)
+ .text
ENTRY(secondary_startup)
/*
* Common entry point for secondary CPUs.
diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S
index 4910232..797b1a6 100644
--- a/arch/arm/kernel/hyp-stub.S
+++ b/arch/arm/kernel/hyp-stub.S
@@ -56,8 +56,8 @@
ldr \reg3, [\reg2]
ldr \reg1, [\reg2, \reg3]
cmp \mode, \reg1 @ matches primary CPU boot mode?
- orrne r7, r7, #BOOT_CPU_MODE_MISMATCH
- strne r7, [r5, r6] @ record what happened and give up
+ orrne \reg1, \reg1, #BOOT_CPU_MODE_MISMATCH
+ strne \reg1, [\reg2, \reg3] @ record what happened and give up
.endm
#else /* ZIMAGE */
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index d3ca4f6..536c85f 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -197,6 +197,7 @@
*/
void machine_halt(void)
{
+ local_irq_disable();
smp_send_stop();
local_irq_disable();
@@ -211,6 +212,7 @@
*/
void machine_power_off(void)
{
+ local_irq_disable();
smp_send_stop();
if (pm_power_off)
@@ -230,6 +232,7 @@
*/
void machine_restart(char *cmd)
{
+ local_irq_disable();
smp_send_stop();
arm_pm_restart(reboot_mode, cmd);
@@ -426,10 +429,11 @@
}
#ifdef CONFIG_MMU
+#ifdef CONFIG_KUSER_HELPERS
/*
* The vectors page is always readable from user space for the
- * atomic helpers and the signal restart code. Insert it into the
- * gate_vma so that it is visible through ptrace and /proc/<pid>/mem.
+ * atomic helpers. Insert it into the gate_vma so that it is visible
+ * through ptrace and /proc/<pid>/mem.
*/
static struct vm_area_struct gate_vma = {
.vm_start = 0xffff0000,
@@ -458,9 +462,48 @@
{
return in_gate_area(NULL, addr);
}
+#define is_gate_vma(vma) ((vma) = &gate_vma)
+#else
+#define is_gate_vma(vma) 0
+#endif
const char *arch_vma_name(struct vm_area_struct *vma)
{
- return (vma == &gate_vma) ? "[vectors]" : NULL;
+ return is_gate_vma(vma) ? "[vectors]" :
+ (vma->vm_mm && vma->vm_start == vma->vm_mm->context.sigpage) ?
+ "[sigpage]" : NULL;
+}
+
+static struct page *signal_page;
+extern struct page *get_signal_page(void);
+
+int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
+{
+ struct mm_struct *mm = current->mm;
+ unsigned long addr;
+ int ret;
+
+ if (!signal_page)
+ signal_page = get_signal_page();
+ if (!signal_page)
+ return -ENOMEM;
+
+ down_write(&mm->mmap_sem);
+ addr = get_unmapped_area(NULL, 0, PAGE_SIZE, 0, 0);
+ if (IS_ERR_VALUE(addr)) {
+ ret = addr;
+ goto up_fail;
+ }
+
+ ret = install_special_mapping(mm, addr, PAGE_SIZE,
+ VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
+ &signal_page);
+
+ if (ret == 0)
+ mm->context.sigpage = addr;
+
+ up_fail:
+ up_write(&mm->mmap_sem);
+ return ret;
}
#endif
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 63af9a7..afc2489 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -836,6 +836,8 @@
void __init hyp_mode_check(void)
{
#ifdef CONFIG_ARM_VIRT_EXT
+ sync_boot_mode();
+
if (is_hyp_mode_available()) {
pr_info("CPU: All CPU(s) started in HYP mode.\n");
pr_info("CPU: Virtualization extensions available.\n");
@@ -971,6 +973,7 @@
"vfpv4",
"idiva",
"idivt",
+ "vfpd32",
"lpae",
NULL
};
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 1c16c35..ab33042 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -8,6 +8,7 @@
* published by the Free Software Foundation.
*/
#include <linux/errno.h>
+#include <linux/random.h>
#include <linux/signal.h>
#include <linux/personality.h>
#include <linux/uaccess.h>
@@ -15,12 +16,11 @@
#include <asm/elf.h>
#include <asm/cacheflush.h>
+#include <asm/traps.h>
#include <asm/ucontext.h>
#include <asm/unistd.h>
#include <asm/vfp.h>
-#include "signal.h"
-
/*
* For ARM syscalls, we encode the syscall number into the instruction.
*/
@@ -40,11 +40,13 @@
#define SWI_THUMB_SIGRETURN (0xdf00 << 16 | 0x2700 | (__NR_sigreturn - __NR_SYSCALL_BASE))
#define SWI_THUMB_RT_SIGRETURN (0xdf00 << 16 | 0x2700 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE))
-const unsigned long sigreturn_codes[7] = {
+static const unsigned long sigreturn_codes[7] = {
MOV_R7_NR_SIGRETURN, SWI_SYS_SIGRETURN, SWI_THUMB_SIGRETURN,
MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
};
+static unsigned long signal_return_offset;
+
#ifdef CONFIG_CRUNCH
static int preserve_crunch_context(struct crunch_sigframe __user *frame)
{
@@ -400,14 +402,20 @@
__put_user(sigreturn_codes[idx+1], rc+1))
return 1;
- if ((cpsr & MODE32_BIT) && !IS_ENABLED(CONFIG_ARM_MPU)) {
+#ifdef CONFIG_MMU
+ if (cpsr & MODE32_BIT) {
+ struct mm_struct *mm = current->mm;
+
/*
- * 32-bit code can use the new high-page
- * signal return code support except when the MPU has
- * protected the vectors page from PL0
+ * 32-bit code can use the signal return page
+ * except when the MPU has protected the vectors
+ * page from PL0
*/
- retcode = KERN_SIGRETURN_CODE + (idx << 2) + thumb;
- } else {
+ retcode = mm->context.sigpage + signal_return_offset +
+ (idx << 2) + thumb;
+ } else
+#endif
+ {
/*
* Ensure that the instruction cache sees
* the return code written onto the stack.
@@ -608,3 +616,33 @@
} while (thread_flags & _TIF_WORK_MASK);
return 0;
}
+
+struct page *get_signal_page(void)
+{
+ unsigned long ptr;
+ unsigned offset;
+ struct page *page;
+ void *addr;
+
+ page = alloc_pages(GFP_KERNEL, 0);
+
+ if (!page)
+ return NULL;
+
+ addr = page_address(page);
+
+ /* Give the signal return code some randomness */
+ offset = 0x200 + (get_random_int() & 0x7fc);
+ signal_return_offset = offset;
+
+ /*
+ * Copy signal return handlers into the vector page, and
+ * set sigreturn to be a pointer to these.
+ */
+ memcpy(addr + offset, sigreturn_codes, sizeof(sigreturn_codes));
+
+ ptr = (unsigned long)addr + offset;
+ flush_icache_range(ptr, ptr + sizeof(sigreturn_codes));
+
+ return page;
+}
diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h
deleted file mode 100644
index 5ff067b7..0000000
--- a/arch/arm/kernel/signal.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * linux/arch/arm/kernel/signal.h
- *
- * Copyright (C) 2005-2009 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500)
-
-extern const unsigned long sigreturn_codes[7];
diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c
index a98b62d..c2edfff 100644
--- a/arch/arm/kernel/smp_tlb.c
+++ b/arch/arm/kernel/smp_tlb.c
@@ -70,23 +70,6 @@
local_flush_bp_all();
}
-#ifdef CONFIG_ARM_ERRATA_798181
-static int erratum_a15_798181(void)
-{
- unsigned int midr = read_cpuid_id();
-
- /* Cortex-A15 r0p0..r3p2 affected */
- if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2)
- return 0;
- return 1;
-}
-#else
-static int erratum_a15_798181(void)
-{
- return 0;
-}
-#endif
-
static void ipi_flush_tlb_a15_erratum(void *arg)
{
dmb();
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index cab094c..ab517fc 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -35,8 +35,6 @@
#include <asm/tls.h>
#include <asm/system_misc.h>
-#include "signal.h"
-
static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" };
void *vectors_page;
@@ -800,15 +798,26 @@
return;
}
-static void __init kuser_get_tls_init(unsigned long vectors)
+#ifdef CONFIG_KUSER_HELPERS
+static void __init kuser_init(void *vectors)
{
+ extern char __kuser_helper_start[], __kuser_helper_end[];
+ int kuser_sz = __kuser_helper_end - __kuser_helper_start;
+
+ memcpy(vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz);
+
/*
* vectors + 0xfe0 = __kuser_get_tls
* vectors + 0xfe8 = hardware TLS instruction at 0xffff0fe8
*/
if (tls_emu || has_tls_reg)
- memcpy((void *)vectors + 0xfe0, (void *)vectors + 0xfe8, 4);
+ memcpy(vectors + 0xfe0, vectors + 0xfe8, 4);
}
+#else
+static void __init kuser_init(void *vectors)
+{
+}
+#endif
void __init early_trap_init(void *vectors_base)
{
@@ -816,33 +825,30 @@
unsigned long vectors = (unsigned long)vectors_base;
extern char __stubs_start[], __stubs_end[];
extern char __vectors_start[], __vectors_end[];
- extern char __kuser_helper_start[], __kuser_helper_end[];
- int kuser_sz = __kuser_helper_end - __kuser_helper_start;
+ unsigned i;
vectors_page = vectors_base;
/*
+ * Poison the vectors page with an undefined instruction. This
+ * instruction is chosen to be undefined for both ARM and Thumb
+ * ISAs. The Thumb version is an undefined instruction with a
+ * branch back to the undefined instruction.
+ */
+ for (i = 0; i < PAGE_SIZE / sizeof(u32); i++)
+ ((u32 *)vectors_base)[i] = 0xe7fddef1;
+
+ /*
* Copy the vectors, stubs and kuser helpers (in entry-armv.S)
* into the vector page, mapped at 0xffff0000, and ensure these
* are visible to the instruction stream.
*/
memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start);
- memcpy((void *)vectors + 0x200, __stubs_start, __stubs_end - __stubs_start);
- memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz);
+ memcpy((void *)vectors + 0x1000, __stubs_start, __stubs_end - __stubs_start);
- /*
- * Do processor specific fixups for the kuser helpers
- */
- kuser_get_tls_init(vectors);
+ kuser_init(vectors_base);
- /*
- * Copy signal return handlers into the vector page, and
- * set sigreturn to be a pointer to these.
- */
- memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE),
- sigreturn_codes, sizeof(sigreturn_codes));
-
- flush_icache_range(vectors, vectors + PAGE_SIZE);
+ flush_icache_range(vectors, vectors + PAGE_SIZE * 2);
modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
#else /* ifndef CONFIG_CPU_V7M */
/*
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index fa25e4e..7bcee5c 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -148,6 +148,23 @@
. = ALIGN(PAGE_SIZE);
__init_begin = .;
#endif
+ /*
+ * The vectors and stubs are relocatable code, and the
+ * only thing that matters is their relative offsets
+ */
+ __vectors_start = .;
+ .vectors 0 : AT(__vectors_start) {
+ *(.vectors)
+ }
+ . = __vectors_start + SIZEOF(.vectors);
+ __vectors_end = .;
+
+ __stubs_start = .;
+ .stubs 0x1000 : AT(__stubs_start) {
+ *(.stubs)
+ }
+ . = __stubs_start + SIZEOF(.stubs);
+ __stubs_end = .;
INIT_TEXT_SECTION(8)
.exit.text : {
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index afbc439..4cdb61c 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -505,7 +505,7 @@
/*
* Amplifiers on the board
*/
-struct ths7303_platform_data ths7303_pdata = {
+static struct ths7303_platform_data ths7303_pdata = {
.ch_1 = 3,
.ch_2 = 3,
.ch_3 = 3,
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 42ef53f..86100d1 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -860,7 +860,7 @@
},
};
-struct venc_platform_data dm355_venc_pdata = {
+static struct venc_platform_data dm355_venc_pdata = {
.setup_pinmux = dm355_vpbe_setup_pinmux,
.setup_clock = dm355_venc_setup_clock,
};
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index fa7af5e..dad2802 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -1349,7 +1349,7 @@
},
};
-struct venc_platform_data dm365_venc_pdata = {
+static struct venc_platform_data dm365_venc_pdata = {
.setup_pinmux = dm365_vpbe_setup_pinmux,
.setup_clock = dm365_venc_setup_clock,
};
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 855d4a7..5952e68 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -92,6 +92,7 @@
bool "SAMSUNG EXYNOS5440"
default y
depends on ARCH_EXYNOS5
+ select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_HAS_OPP
select HAVE_ARM_ARCH_TIMER
select AUTO_ZRELADDR
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index e970a7a..5369615 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -14,7 +14,7 @@
obj-$(CONFIG_ARCH_EXYNOS) += common.o
-obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_S5P_PM) += pm.o
obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 164685b..ba95e5d 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -58,7 +58,6 @@
static void exynos4_map_io(void);
static void exynos5_map_io(void);
-static void exynos5440_map_io(void);
static int exynos_init(void);
static struct cpu_table cpu_ids[] __initdata = {
@@ -95,7 +94,6 @@
}, {
.idcode = EXYNOS5440_SOC_ID,
.idmask = EXYNOS5_SOC_MASK,
- .map_io = exynos5440_map_io,
.init = exynos_init,
.name = name_exynos5440,
},
@@ -150,11 +148,6 @@
.length = SZ_64K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(EXYNOS4_PA_UART),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
.length = SZ_128K,
@@ -268,20 +261,6 @@
.pfn = __phys_to_pfn(EXYNOS5_PA_PMU),
.length = SZ_64K,
.type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(EXYNOS5_PA_UART),
- .length = SZ_512K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos5440_iodesc0[] __initdata = {
- {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(EXYNOS5440_PA_UART0),
- .length = SZ_512K,
- .type = MT_DEVICE,
},
};
@@ -388,11 +367,6 @@
iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
}
-static void __init exynos5440_map_io(void)
-{
- iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0));
-}
-
void __init exynos_init_time(void)
{
of_clk_init(NULL);
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 3e156bc..972490f 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -97,6 +97,5 @@
};
extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
-extern void s3c_cpu_resume(void);
#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index 17a18ff..225ee84 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -25,6 +25,7 @@
#include <mach/regs-pmu.h>
#include <plat/cpu.h>
+#include <plat/pm.h>
#include "common.h"
diff --git a/arch/arm/mach-exynos/include/mach/memory.h b/arch/arm/mach-exynos/include/mach/memory.h
index 374ef2c..2a4cdb7 100644
--- a/arch/arm/mach-exynos/include/mach/memory.h
+++ b/arch/arm/mach-exynos/include/mach/memory.h
@@ -15,8 +15,13 @@
#define PLAT_PHYS_OFFSET UL(0x40000000)
+#ifndef CONFIG_ARM_LPAE
/* Maximum of 256MiB in one bank */
#define MAX_PHYSMEM_BITS 32
#define SECTION_SIZE_BITS 28
+#else
+#define MAX_PHYSMEM_BITS 36
+#define SECTION_SIZE_BITS 31
+#endif
#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 41c2069..c679db5 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -217,6 +217,9 @@
struct clk *pll_base;
unsigned int tmp;
+ if (soc_is_exynos5440())
+ return 0;
+
s3c_pm_init();
/* All wakeup disable */
@@ -340,6 +343,9 @@
static __init int exynos_pm_syscore_init(void)
{
+ if (soc_is_exynos5440())
+ return 0;
+
register_syscore_ops(&exynos_pm_syscore_ops);
return 0;
}
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index a7cd2cf..3490a24 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -276,8 +276,6 @@
sys->mem_offset = DC21285_PCI_MEM;
- pci_ioremap_io(0, DC21285_PCI_IO);
-
pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset);
pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index dc5d6be..8881579 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -115,6 +115,7 @@
{
struct resource *res;
int reg = -1;
+ u32 val;
struct device *dev = __dev;
if (event != BUS_NOTIFY_ADD_DEVICE)
@@ -141,10 +142,10 @@
return NOTIFY_DONE;
if (of_property_read_bool(dev->of_node, "dma-coherent")) {
- writel(0xff31, sregs_base + reg);
+ val = readl(sregs_base + reg);
+ writel(val | 0xff01, sregs_base + reg);
set_dma_ops(dev, &arm_coherent_dma_ops);
- } else
- writel(0, sregs_base + reg);
+ }
return NOTIFY_OK;
}
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 4282e99f..86567d9 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -199,7 +199,8 @@
static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", };
static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
-static const char *emi_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *emi_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", };
+static const char *emi_slow_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *vdo_axi_sels[] = { "axi", "ahb", };
static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
@@ -392,7 +393,7 @@
clk[usdhc4_sel] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
clk[enfc_sel] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels));
clk[emi_sel] = imx_clk_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels));
- clk[emi_slow_sel] = imx_clk_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_sels, ARRAY_SIZE(emi_sels));
+ clk[emi_slow_sel] = imx_clk_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels, ARRAY_SIZE(emi_slow_sels));
clk[vdo_axi_sel] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels));
clk[vpu_axi_sel] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels));
clk[cko1_sel] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c
index d617c0b..b169a39 100644
--- a/arch/arm/mach-imx/clk-vf610.c
+++ b/arch/arm/mach-imx/clk-vf610.c
@@ -183,6 +183,8 @@
clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7);
clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24);
clk[VF610_CLK_ENET_TS] = imx_clk_gate("enet_ts", "enet_ts_sel", CCM_CSCDR1, 23);
+ clk[VF610_CLK_ENET0] = imx_clk_gate2("enet0", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(0));
+ clk[VF610_CLK_ENET1] = imx_clk_gate2("enet1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(1));
clk[VF610_CLK_PIT] = imx_clk_gate2("pit", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(7));
diff --git a/arch/arm/mach-imx/mx27.h b/arch/arm/mach-imx/mx27.h
index e074616..8a65f19 100644
--- a/arch/arm/mach-imx/mx27.h
+++ b/arch/arm/mach-imx/mx27.h
@@ -135,7 +135,7 @@
#define MX27_INT_GPT4 (NR_IRQS_LEGACY + 4)
#define MX27_INT_RTIC (NR_IRQS_LEGACY + 5)
#define MX27_INT_CSPI3 (NR_IRQS_LEGACY + 6)
-#define MX27_INT_SDHC (NR_IRQS_LEGACY + 7)
+#define MX27_INT_MSHC (NR_IRQS_LEGACY + 7)
#define MX27_INT_GPIO (NR_IRQS_LEGACY + 8)
#define MX27_INT_SDHC3 (NR_IRQS_LEGACY + 9)
#define MX27_INT_SDHC2 (NR_IRQS_LEGACY + 10)
diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c
index fe4d9ff..b661c5c 100644
--- a/arch/arm/mach-keystone/keystone.c
+++ b/arch/arm/mach-keystone/keystone.c
@@ -49,7 +49,7 @@
NULL,
};
-void keystone_restart(char mode, const char *cmd)
+void keystone_restart(enum reboot_mode mode, const char *cmd)
{
u32 val;
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 3d6ee14..76170dd 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -61,7 +61,7 @@
select HAVE_SMP
select COMMON_CLK
select HAVE_ARM_ARCH_TIMER
- select ARM_ERRATA_798181
+ select ARM_ERRATA_798181 if SMP
config SOC_AM33XX
bool "AM33XX support"
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index e5fbfed..be5d005 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -15,6 +15,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/irqdomain.h>
+#include <linux/clk.h>
#include <asm/mach/arch.h>
@@ -35,6 +36,21 @@
{ }
};
+/*
+ * Create alias for USB host PHY clock.
+ * Remove this when clock phandle can be provided via DT
+ */
+static void __init legacy_init_ehci_clk(char *clkname)
+{
+ int ret;
+
+ ret = clk_add_alias("main_clk", NULL, clkname, NULL);
+ if (ret) {
+ pr_err("%s:Failed to add main_clk alias to %s :%d\n",
+ __func__, clkname, ret);
+ }
+}
+
static void __init omap_generic_init(void)
{
omap_sdrc_init(NULL, NULL);
@@ -45,10 +61,15 @@
* HACK: call display setup code for selected boards to enable omapdss.
* This will be removed when omapdss supports DT.
*/
- if (of_machine_is_compatible("ti,omap4-panda"))
+ if (of_machine_is_compatible("ti,omap4-panda")) {
omap4_panda_display_init_of();
+ legacy_init_ehci_clk("auxclk3_ck");
+
+ }
else if (of_machine_is_compatible("ti,omap4-sdp"))
omap_4430sdp_display_init_of();
+ else if (of_machine_is_compatible("ti,omap5-uevm"))
+ legacy_init_ehci_clk("auxclk1_ck");
}
#ifdef CONFIG_SOC_OMAP2420
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index f6726bb..3a3362f 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -477,16 +477,24 @@
/* USB Hub power-on and reset */
gpio_direction_output(usb_hub_reset, 1);
gpio_direction_output(GPIO9_USB_VBUS_EN, 0);
- regulator_enable(em_x270_usb_ldo);
+ err = regulator_enable(em_x270_usb_ldo);
+ if (err)
+ goto err_free_rst_gpio;
+
gpio_set_value(usb_hub_reset, 0);
gpio_set_value(usb_hub_reset, 1);
regulator_disable(em_x270_usb_ldo);
- regulator_enable(em_x270_usb_ldo);
+ err = regulator_enable(em_x270_usb_ldo);
+ if (err)
+ goto err_free_rst_gpio;
+
gpio_set_value(usb_hub_reset, 0);
gpio_set_value(GPIO9_USB_VBUS_EN, 1);
return 0;
+err_free_rst_gpio:
+ gpio_free(usb_hub_reset);
err_free_vbus_gpio:
gpio_free(GPIO9_USB_VBUS_EN);
err_free_usb_ldo:
@@ -592,7 +600,7 @@
return err;
}
-static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
+static int em_x270_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
@@ -600,10 +608,11 @@
int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
- regulator_enable(em_x270_sdio_ldo);
+ return regulator_enable(em_x270_sdio_ldo);
} else {
regulator_disable(em_x270_sdio_ldo);
}
+ return 0;
}
static void em_x270_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index d2c6523..dd70343 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -408,7 +408,7 @@
return err;
}
-static void mainstone_mci_setpower(struct device *dev, unsigned int vdd)
+static int mainstone_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
@@ -420,6 +420,7 @@
printk(KERN_DEBUG "%s: off\n", __func__);
MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON;
}
+ return 0;
}
static void mainstone_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index fb7f1d1..13e5b00 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -335,7 +335,7 @@
return err;
}
-static void pcm990_mci_setpower(struct device *dev, unsigned int vdd)
+static int pcm990_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data *p_d = dev->platform_data;
u8 val;
@@ -348,6 +348,7 @@
val &= ~PCM990_CTRL_MMC2PWR;
pcm990_cpld_writeb(PCM990_CTRL_MMC2PWR, PCM990_CTRL_REG5);
+ return 0;
}
static void pcm990_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 711d37e..aedf053 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -258,7 +258,7 @@
return err;
}
-static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
+static int poodle_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
@@ -270,6 +270,8 @@
gpio_set_value(POODLE_GPIO_SD_PWR1, 0);
gpio_set_value(POODLE_GPIO_SD_PWR, 0);
}
+
+ return 0;
}
static void poodle_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 2125df0..4c29173 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -598,7 +598,7 @@
* NOTE: The card detect interrupt isn't debounced so we delay it by 250ms to
* give the card a chance to fully insert/eject.
*/
-static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
+static int spitz_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
@@ -606,6 +606,8 @@
spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, SCOOP_CPR_SD_3V);
else
spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, 0x0);
+
+ return 0;
}
static struct pxamci_platform_data spitz_mci_platform_data = {
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 88fde43..62aea3e 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -734,9 +734,10 @@
*
* Very simple control. Either it is on or off and is controlled by
* a gpio pin */
-static void stargate2_mci_setpower(struct device *dev, unsigned int vdd)
+static int stargate2_mci_setpower(struct device *dev, unsigned int vdd)
{
gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd);
+ return 0;
}
static void stargate2_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 7791ac7..dba2173 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -30,7 +30,6 @@
select S3C2410_CLOCK
select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
select S3C2410_PM if PM
- select SAMSUNG_HRT
select SAMSUNG_WDT_RESET
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
@@ -42,7 +41,6 @@
select CPU_LLSERIAL_S3C2440
select S3C2412_DMA if S3C24XX_DMA
select S3C2412_PM if PM
- select SAMSUNG_HRT
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
@@ -54,7 +52,6 @@
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
select SAMSUNG_CLKSRC
- select SAMSUNG_HRT
help
Support for the S3C2416 SoC from the S3C24XX line
@@ -65,7 +62,6 @@
select S3C2410_CLOCK
select S3C2410_PM if PM
select S3C2440_DMA if S3C24XX_DMA
- select SAMSUNG_HRT
help
Support for S3C2440 Samsung Mobile CPU based systems.
@@ -75,7 +71,6 @@
select CPU_LLSERIAL_S3C2440
select S3C2410_CLOCK
select S3C2410_PM if PM
- select SAMSUNG_HRT
help
Support for S3C2442 Samsung Mobile CPU based systems.
@@ -91,7 +86,6 @@
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
select SAMSUNG_CLKSRC
- select SAMSUNG_HRT
help
Support for the S3C2443 SoC from the S3C24XX line
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c
index 34fffdf..d39d3c7 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c
@@ -119,66 +119,101 @@
}
};
-static struct clk init_clocks[] = {
- {
- .name = "lcd",
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_LCDC,
- }, {
- .name = "gpio",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_GPIO,
- }, {
- .name = "usb-host",
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_USBH,
- }, {
- .name = "usb-device",
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_USBD,
- }, {
- .name = "timers",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_PWMT,
- }, {
- .name = "uart",
- .devname = "s3c2410-uart.0",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_UART0,
- }, {
- .name = "uart",
- .devname = "s3c2410-uart.1",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_UART1,
- }, {
- .name = "uart",
- .devname = "s3c2410-uart.2",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_UART2,
- }, {
- .name = "rtc",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_RTC,
- }, {
- .name = "watchdog",
- .parent = &clk_p,
- .ctrlbit = 0,
- }, {
- .name = "usb-bus-host",
- .parent = &clk_usb_bus,
- }, {
- .name = "usb-bus-gadget",
- .parent = &clk_usb_bus,
- },
+static struct clk clk_lcd = {
+ .name = "lcd",
+ .parent = &clk_h,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_LCDC,
+};
+
+static struct clk clk_gpio = {
+ .name = "gpio",
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_GPIO,
+};
+
+static struct clk clk_usb_host = {
+ .name = "usb-host",
+ .parent = &clk_h,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_USBH,
+};
+
+static struct clk clk_usb_device = {
+ .name = "usb-device",
+ .parent = &clk_h,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_USBD,
+};
+
+static struct clk clk_timers = {
+ .name = "timers",
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_PWMT,
+};
+
+struct clk s3c24xx_clk_uart0 = {
+ .name = "uart",
+ .devname = "s3c2410-uart.0",
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_UART0,
+};
+
+struct clk s3c24xx_clk_uart1 = {
+ .name = "uart",
+ .devname = "s3c2410-uart.1",
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_UART1,
+};
+
+struct clk s3c24xx_clk_uart2 = {
+ .name = "uart",
+ .devname = "s3c2410-uart.2",
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_UART2,
+};
+
+static struct clk clk_rtc = {
+ .name = "rtc",
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_RTC,
+};
+
+static struct clk clk_watchdog = {
+ .name = "watchdog",
+ .parent = &clk_p,
+ .ctrlbit = 0,
+};
+
+static struct clk clk_usb_bus_host = {
+ .name = "usb-bus-host",
+ .parent = &clk_usb_bus,
+};
+
+static struct clk clk_usb_bus_gadget = {
+ .name = "usb-bus-gadget",
+ .parent = &clk_usb_bus,
+};
+
+static struct clk *init_clocks[] = {
+ &clk_lcd,
+ &clk_gpio,
+ &clk_usb_host,
+ &clk_usb_device,
+ &clk_timers,
+ &s3c24xx_clk_uart0,
+ &s3c24xx_clk_uart1,
+ &s3c24xx_clk_uart2,
+ &clk_rtc,
+ &clk_watchdog,
+ &clk_usb_bus_host,
+ &clk_usb_bus_gadget,
};
/* s3c2410_baseclk_add()
@@ -195,7 +230,6 @@
{
unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
- struct clk *clkp;
struct clk *xtal;
int ret;
int ptr;
@@ -207,8 +241,9 @@
/* register clocks from clock array */
- clkp = init_clocks;
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) {
+ struct clk *clkp = init_clocks[ptr];
+
/* ensure that we note the clock state */
clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
@@ -246,6 +281,5 @@
(clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
(clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
- s3c_pwmclk_init();
return 0;
}
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c
index 2cc017d..d8f253f 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2412.c
@@ -757,6 +757,5 @@
}
clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup));
- s3c_pwmclk_init();
return 0;
}
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c
index 036056ce..d421a72 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2416.c
@@ -168,6 +168,4 @@
s3c24xx_register_clock(&hsmmc0_clk);
clkdev_add_table(s3c2416_clk_lookup, ARRAY_SIZE(s3c2416_clk_lookup));
- s3c_pwmclk_init();
-
}
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c
index 1069b56..aaf006d 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2440.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c
@@ -166,6 +166,9 @@
CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
+ CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0),
+ CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1),
+ CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2),
CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll),
};
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c
index 0a53051..76cd31f 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c
@@ -209,6 +209,4 @@
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
-
- s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index c157103e..457261c 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -27,6 +27,7 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
+#include <clocksource/samsung_pwm.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
@@ -49,6 +50,7 @@
#include <plat/clock.h>
#include <plat/cpu-freq.h>
#include <plat/pll.h>
+#include <plat/pwm-core.h>
#include "common.h"
@@ -216,6 +218,13 @@
S3C2410_CLKCON);
}
+static struct samsung_pwm_variant s3c24xx_pwm_variant = {
+ .bits = 16,
+ .div_base = 1,
+ .has_tint_cstat = false,
+ .tclk_mask = (1 << 4),
+};
+
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
{
arm_pm_idle = s3c24xx_default_idle;
@@ -232,6 +241,24 @@
s3c24xx_init_cpu();
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+ samsung_pwm_set_platdata(&s3c24xx_pwm_variant);
+}
+
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+ s3c24xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+ s3c24xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+ unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+ IRQ_TIMER0, IRQ_TIMER1, IRQ_TIMER2, IRQ_TIMER3, IRQ_TIMER4,
+ };
+
+ samsung_pwm_clocksource_init(S3C_VA_TIMER,
+ timer_irqs, &s3c24xx_pwm_variant);
}
/* Serial port registrations */
diff --git a/arch/arm/mach-s3c24xx/include/mach/map.h b/arch/arm/mach-s3c24xx/include/mach/map.h
index 8ba381f..444793f 100644
--- a/arch/arm/mach-s3c24xx/include/mach/map.h
+++ b/arch/arm/mach-s3c24xx/include/mach/map.h
@@ -167,4 +167,6 @@
#define S3C_PA_SPI0 S3C2443_PA_SPI0
#define S3C_PA_SPI1 S3C2443_PA_SPI1
+#define SAMSUNG_PA_TIMER S3C2410_PA_TIMER
+
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index af4334d..74dd479 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -512,7 +512,7 @@
static struct platform_device h1940_backlight = {
.name = "pwm-backlight",
.dev = {
- .parent = &s3c_device_timer[0].dev,
+ .parent = &samsung_device_pwm.dev,
.platform_data = &backlight_data,
},
.id = -1,
@@ -632,7 +632,7 @@
&h1940_device_bluetooth,
&s3c_device_sdi,
&s3c_device_rtc,
- &s3c_device_timer[0],
+ &samsung_device_pwm,
&h1940_backlight,
&h1940_lcd_powerdev,
&s3c_device_adc,
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 44ca018..206b1f7 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -530,7 +530,7 @@
static struct platform_device rx1950_backlight = {
.name = "pwm-backlight",
.dev = {
- .parent = &s3c_device_timer[0].dev,
+ .parent = &samsung_device_pwm.dev,
.platform_data = &rx1950_backlight_data,
},
};
@@ -717,8 +717,7 @@
&s3c_device_sdi,
&s3c_device_adc,
&s3c_device_ts,
- &s3c_device_timer[0],
- &s3c_device_timer[1],
+ &samsung_device_pwm,
&rx1950_backlight,
&rx1950_device_gpiokeys,
&power_supply,
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 2057853..041da51 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -17,13 +17,11 @@
# Configuration options for the S3C6410 CPU
config CPU_S3C6400
- select SAMSUNG_HRT
bool
help
Enable S3C6400 CPU support
config CPU_S3C6410
- select SAMSUNG_HRT
bool
help
Enable S3C6410 CPU support
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 8499415..c1bcc4a6 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -1004,6 +1004,4 @@
for (cnt = 0; cnt < ARRAY_SIZE(clksrc_cdev); cnt++)
s3c_register_clksrc(clksrc_cdev[cnt], 1);
clkdev_add_table(s3c64xx_clk_lookup, ARRAY_SIZE(s3c64xx_clk_lookup));
-
- s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 3f62e46..73d79cf 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -27,6 +27,7 @@
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/irqchip/arm-vic.h>
+#include <clocksource/samsung_pwm.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -42,7 +43,7 @@
#include <plat/pm.h>
#include <plat/gpio-cfg.h>
#include <plat/irq-uart.h>
-#include <plat/irq-vic-timer.h>
+#include <plat/pwm-core.h>
#include <plat/regs-irqtype.h>
#include <plat/regs-serial.h>
#include <plat/watchdog-reset.h>
@@ -149,6 +150,30 @@
.bus = &s3c64xx_subsys,
};
+static struct samsung_pwm_variant s3c64xx_pwm_variant = {
+ .bits = 32,
+ .div_base = 0,
+ .has_tint_cstat = true,
+ .tclk_mask = (1 << 7) | (1 << 6) | (1 << 5),
+};
+
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+ s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+ s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+ unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+ IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+ IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+ };
+
+ samsung_pwm_clocksource_init(S3C_VA_TIMER,
+ timer_irqs, &s3c64xx_pwm_variant);
+}
+
/* read cpu identification code */
void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
@@ -161,6 +186,8 @@
s3c64xx_init_cpu();
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+ samsung_pwm_set_platdata(&s3c64xx_pwm_variant);
}
static __init int s3c64xx_dev_init(void)
@@ -195,9 +222,6 @@
/* initialise the pair of VICs */
vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
-
- /* add the timer sub-irqs */
- s3c_init_vic_timer_irq(5, IRQ_TIMER0);
}
#define eint_offset(irq) ((irq) - IRQ_EINT(0))
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
index 96d60e0..67bbd1d 100644
--- a/arch/arm/mach-s3c64xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -107,14 +107,6 @@
#define IRQ_TC IRQ_PENDN
#define IRQ_ADC S3C64XX_IRQ_VIC1(31)
-#define S3C64XX_TIMER_IRQ(x) S3C_IRQ(64 + (x))
-
-#define IRQ_TIMER0 S3C64XX_TIMER_IRQ(0)
-#define IRQ_TIMER1 S3C64XX_TIMER_IRQ(1)
-#define IRQ_TIMER2 S3C64XX_TIMER_IRQ(2)
-#define IRQ_TIMER3 S3C64XX_TIMER_IRQ(3)
-#define IRQ_TIMER4 S3C64XX_TIMER_IRQ(4)
-
/* compatibility for device defines */
#define IRQ_IIC1 IRQ_S3C6410_IIC1
diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
index 8e2097b..f55ccb1 100644
--- a/arch/arm/mach-s3c64xx/include/mach/map.h
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -121,5 +121,6 @@
#define SAMSUNG_PA_ADC S3C64XX_PA_ADC
#define SAMSUNG_PA_CFCON S3C64XX_PA_CFCON
#define SAMSUNG_PA_KEYPAD S3C64XX_PA_KEYPAD
+#define SAMSUNG_PA_TIMER S3C64XX_PA_TIMER
#endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index 0c7e1d9..c3da1b6 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -22,7 +22,6 @@
#include <mach/map.h>
#include <plat/regs-serial.h>
-#include <plat/regs-timer.h>
#include <mach/regs-gpio.h>
#include <plat/cpu.h>
#include <plat/pm.h>
@@ -43,7 +42,6 @@
SAVE_ITEM(S3C64XX_EINT0FLTCON2),
SAVE_ITEM(S3C64XX_EINT0FLTCON3),
SAVE_ITEM(S3C64XX_EINT0MASK),
- SAVE_ITEM(S3C64XX_TINT_CSTAT),
};
static struct irq_grp_save {
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 8ad88ac..28889cc 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -120,7 +120,7 @@
.name = "pwm-backlight",
.id = -1,
.dev = {
- .parent = &s3c_device_timer[0].dev,
+ .parent = &samsung_device_pwm.dev,
.platform_data = &crag6410_backlight_data,
},
};
@@ -375,7 +375,7 @@
&s3c_device_fb,
&s3c_device_ohci,
&s3c_device_usb_hsotg,
- &s3c_device_timer[0],
+ &samsung_device_pwm,
&s3c64xx_device_iis0,
&s3c64xx_device_iis1,
&samsung_device_keypad,
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 5b7f357..f39569e 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -123,7 +123,7 @@
static struct platform_device hmt_backlight_device = {
.name = "pwm-backlight",
.dev = {
- .parent = &s3c_device_timer[1].dev,
+ .parent = &samsung_device_pwm.dev,
.platform_data = &hmt_backlight_data,
},
};
@@ -239,7 +239,7 @@
&s3c_device_nand,
&s3c_device_fb,
&s3c_device_ohci,
- &s3c_device_timer[1],
+ &samsung_device_pwm,
&hmt_backlight_device,
&hmt_leds_device,
};
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 58ac990..86d980b 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -157,7 +157,7 @@
static struct platform_device smartq_backlight_device = {
.name = "pwm-backlight",
.dev = {
- .parent = &s3c_device_timer[1].dev,
+ .parent = &samsung_device_pwm.dev,
.platform_data = &smartq_backlight_data,
},
};
@@ -246,7 +246,7 @@
&s3c_device_i2c0,
&s3c_device_ohci,
&s3c_device_rtc,
- &s3c_device_timer[1],
+ &samsung_device_pwm,
&s3c_device_ts,
&s3c_device_usb_hsotg,
&s3c64xx_device_iis0,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index bd3295a..d90b450 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -274,6 +274,7 @@
&s3c_device_i2c1,
&s3c_device_fb,
&s3c_device_ohci,
+ &samsung_device_pwm,
&s3c_device_usb_hsotg,
&s3c64xx_device_iisv4,
&samsung_device_keypad,
@@ -691,9 +692,9 @@
s3c_ide_set_platdata(&smdk6410_ide_pdata);
- samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data);
-
platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
+
+ samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data);
}
MACHINE_START(SMDK6410, "SMDK6410")
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index 5a707bd..bb2111b 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -11,14 +11,12 @@
bool
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
- select SAMSUNG_HRT
select SAMSUNG_WAKEMASK if PM
help
Enable S5P6440 CPU support
config CPU_S5P6450
bool
- select SAMSUNG_HRT
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
select SAMSUNG_WAKEMASK if PM
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
index 35378152..ae34a1d 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -629,6 +629,4 @@
clkdev_add_table(s5p6440_clk_lookup, ARRAY_SIZE(s5p6440_clk_lookup));
s3c24xx_register_clock(&dummy_apb_pclk);
-
- s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
index af384dd..0b3ca2e 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -698,6 +698,4 @@
clkdev_add_table(s5p6450_clk_lookup, ARRAY_SIZE(s5p6450_clk_lookup));
s3c24xx_register_clock(&dummy_apb_pclk);
-
- s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
index dfdfdc3..42e14f2 100644
--- a/arch/arm/mach-s5p64x0/common.c
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <linux/device.h>
#include <linux/serial_core.h>
+#include <clocksource/samsung_pwm.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/dma-mapping.h>
@@ -47,6 +48,7 @@
#include <plat/fb-core.h>
#include <plat/spi-core.h>
#include <plat/gpio-cfg.h>
+#include <plat/pwm-core.h>
#include <plat/regs-irqtype.h>
#include <plat/regs-serial.h>
#include <plat/watchdog-reset.h>
@@ -157,6 +159,30 @@
cpu_do_idle();
}
+static struct samsung_pwm_variant s5p64x0_pwm_variant = {
+ .bits = 32,
+ .div_base = 0,
+ .has_tint_cstat = true,
+ .tclk_mask = 0,
+};
+
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+ s5p64x0_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+ s5p64x0_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+ unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+ IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+ IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+ };
+
+ samsung_pwm_clocksource_init(S3C_VA_TIMER,
+ timer_irqs, &s5p64x0_pwm_variant);
+}
+
/*
* s5p64x0_map_io
*
@@ -176,6 +202,7 @@
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
samsung_wdt_reset_init(S3C_VA_WATCHDOG);
+ samsung_pwm_set_platdata(&s5p64x0_pwm_variant);
}
void __init s5p6440_map_io(void)
diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h
index 5b845e8..53982db 100644
--- a/arch/arm/mach-s5p64x0/include/mach/irqs.h
+++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h
@@ -141,8 +141,6 @@
#define IRQ_EINT_GROUP(grp, x) (IRQ_EINT_GROUP##grp##_BASE + (x))
-#define IRQ_TIMER_BASE (11)
-
/* Set the default NR_IRQS */
#define NR_IRQS (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1)
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
index 0c0175d..50a6e96 100644
--- a/arch/arm/mach-s5p64x0/include/mach/map.h
+++ b/arch/arm/mach-s5p64x0/include/mach/map.h
@@ -76,6 +76,7 @@
#define S5P_PA_TIMER S5P64X0_PA_TIMER
#define SAMSUNG_PA_ADC S5P64X0_PA_ADC
+#define SAMSUNG_PA_TIMER S5P64X0_PA_TIMER
/* UART */
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 73f71a6..0b00304 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -162,6 +162,7 @@
&s3c_device_rtc,
&s3c_device_i2c0,
&s3c_device_i2c1,
+ &samsung_device_pwm,
&s3c_device_ts,
&s3c_device_wdt,
&s5p6440_device_iis,
@@ -254,8 +255,6 @@
i2c_register_board_info(1, smdk6440_i2c_devs1,
ARRAY_SIZE(smdk6440_i2c_devs1));
- samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data);
-
s5p6440_set_lcd_interface();
s3c_fb_set_platdata(&smdk6440_lcd_pdata);
@@ -264,6 +263,8 @@
s3c_sdhci2_set_platdata(&smdk6440_hsmmc2_pdata);
platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
+
+ samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data);
}
MACHINE_START(SMDK6440, "SMDK6440")
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index 18303e1..5949296 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -180,6 +180,7 @@
&s3c_device_rtc,
&s3c_device_i2c0,
&s3c_device_i2c1,
+ &samsung_device_pwm,
&s3c_device_ts,
&s3c_device_wdt,
&s5p6450_device_iis0,
@@ -273,8 +274,6 @@
i2c_register_board_info(1, smdk6450_i2c_devs1,
ARRAY_SIZE(smdk6450_i2c_devs1));
- samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data);
-
s5p6450_set_lcd_interface();
s3c_fb_set_platdata(&smdk6450_lcd_pdata);
@@ -283,6 +282,8 @@
s3c_sdhci2_set_platdata(&smdk6450_hsmmc2_pdata);
platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices));
+
+ samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data);
}
MACHINE_START(SMDK6450, "SMDK6450")
diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c
index 97c2a08a..861e15c 100644
--- a/arch/arm/mach-s5p64x0/pm.c
+++ b/arch/arm/mach-s5p64x0/pm.c
@@ -18,7 +18,6 @@
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/regs-timer.h>
#include <plat/wakeup-mask.h>
#include <mach/regs-clock.h>
@@ -48,8 +47,6 @@
SAVE_ITEM(S5P64X0_MEM0CONSLP1),
SAVE_ITEM(S5P64X0_MEM0DRVCON),
SAVE_ITEM(S5P64X0_MEM1DRVCON),
-
- SAVE_ITEM(S3C64XX_TINT_CSTAT),
};
/* DPLL is present only in S5P6450 */
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index 2f456a4..15170be 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -11,7 +11,6 @@
bool
select S5P_EXT_INT
select SAMSUNG_DMADEV
- select SAMSUNG_HRT
help
Enable S5PC100 CPU support
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index a206dc3..d0dc10e 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -1358,6 +1358,4 @@
s3c_disable_clocks(clk_cdev[ptr], 1);
s3c24xx_register_clock(&dummy_apb_pclk);
-
- s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c
index 4bdfecf..c5a8eea 100644
--- a/arch/arm/mach-s5pc100/common.c
+++ b/arch/arm/mach-s5pc100/common.c
@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <linux/device.h>
#include <linux/serial_core.h>
+#include <clocksource/samsung_pwm.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/reboot.h>
@@ -46,6 +47,7 @@
#include <plat/fb-core.h>
#include <plat/iic-core.h>
#include <plat/onenand-core.h>
+#include <plat/pwm-core.h>
#include <plat/spi-core.h>
#include <plat/regs-serial.h>
#include <plat/watchdog-reset.h>
@@ -132,6 +134,30 @@
}
};
+static struct samsung_pwm_variant s5pc100_pwm_variant = {
+ .bits = 32,
+ .div_base = 0,
+ .has_tint_cstat = true,
+ .tclk_mask = (1 << 5),
+};
+
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+ s5pc100_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+ s5pc100_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+ unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+ IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+ IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+ };
+
+ samsung_pwm_clocksource_init(S3C_VA_TIMER,
+ timer_irqs, &s5pc100_pwm_variant);
+}
+
/*
* s5pc100_map_io
*
@@ -149,6 +175,8 @@
s5p_init_cpu(S5P_VA_CHIPID);
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+ samsung_pwm_set_platdata(&s5pc100_pwm_variant);
}
void __init s5pc100_map_io(void)
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
index 2870f12..d2eb475 100644
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -97,8 +97,6 @@
#define IRQ_SDMFIQ S5P_IRQ_VIC2(31)
#define IRQ_VIC_END S5P_IRQ_VIC2(31)
-#define IRQ_TIMER_BASE (11)
-
#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index 54bc4f8..2550b61 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -116,6 +116,7 @@
#define SAMSUNG_PA_ADC S5PC100_PA_TSADC
#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON
#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD
+#define SAMSUNG_PA_TIMER S5PC100_PA_TIMER
#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000)
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 8c880f7..7c57a22 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -194,6 +194,7 @@
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
+ &samsung_device_pwm,
&s3c_device_ts,
&s3c_device_wdt,
&smdkc100_lcd_powerdev,
@@ -246,9 +247,9 @@
gpio_request(S5PC100_GPH0(6), "GPH0");
smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
- samsung_bl_set(&smdkc100_bl_gpio_info, &smdkc100_bl_data);
-
platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
+
+ samsung_bl_set(&smdkc100_bl_gpio_info, &smdkc100_bl_data);
}
MACHINE_START(SMDKC100, "SMDKC100")
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 0963283..caaedaf 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -15,7 +15,6 @@
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
- select SAMSUNG_HRT
help
Enable S5PV210 CPU support
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index f051f53..ca46372 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -1362,5 +1362,4 @@
for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
s3c_disable_clocks(clk_cdev[ptr], 1);
- s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c
index 023f1a7..26027a2 100644
--- a/arch/arm/mach-s5pv210/common.c
+++ b/arch/arm/mach-s5pv210/common.c
@@ -19,6 +19,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/device.h>
+#include <clocksource/samsung_pwm.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/dma-mapping.h>
@@ -42,6 +43,7 @@
#include <plat/fimc-core.h>
#include <plat/iic-core.h>
#include <plat/keypad-core.h>
+#include <plat/pwm-core.h>
#include <plat/tv-core.h>
#include <plat/spi-core.h>
#include <plat/regs-serial.h>
@@ -148,6 +150,30 @@
__raw_writel(0x1, S5P_SWRESET);
}
+static struct samsung_pwm_variant s5pv210_pwm_variant = {
+ .bits = 32,
+ .div_base = 0,
+ .has_tint_cstat = true,
+ .tclk_mask = (1 << 5),
+};
+
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+ s5pv210_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+ s5pv210_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+ unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+ IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+ IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+ };
+
+ samsung_pwm_clocksource_init(S3C_VA_TIMER,
+ timer_irqs, &s5pv210_pwm_variant);
+}
+
/*
* s5pv210_map_io
*
@@ -165,6 +191,8 @@
s5p_init_cpu(S5P_VA_CHIPID);
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+ samsung_pwm_set_platdata(&s5pv210_pwm_variant);
}
void __init s5pv210_map_io(void)
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
index e777e01..5e0de3a 100644
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -118,8 +118,6 @@
#define IRQ_MDNIE3 S5P_IRQ_VIC3(8)
#define IRQ_VIC_END S5P_IRQ_VIC3(31)
-#define IRQ_TIMER_BASE (11)
-
#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index b7c8a19..763929a 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -139,6 +139,7 @@
#define SAMSUNG_PA_ADC S5PV210_PA_ADC
#define SAMSUNG_PA_CFCON S5PV210_PA_CFCON
#define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD
+#define SAMSUNG_PA_TIMER S5PV210_PA_TIMER
/* UART */
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index d50b6f1..6d72bb99 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -218,6 +218,7 @@
&s3c_device_i2c0,
&s3c_device_i2c1,
&s3c_device_i2c2,
+ &samsung_device_pwm,
&s3c_device_rtc,
&s3c_device_ts,
&s3c_device_usb_hsotg,
@@ -316,11 +317,11 @@
s3c_fb_set_platdata(&smdkv210_lcd0_pdata);
- samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);
-
s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata);
platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
+
+ samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);
}
MACHINE_START(SMDKV210, "SMDKV210")
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
index 2b68a67..3cf3f9c 100644
--- a/arch/arm/mach-s5pv210/pm.c
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -21,7 +21,6 @@
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/regs-timer.h>
#include <mach/regs-irq.h>
#include <mach/regs-clock.h>
@@ -77,15 +76,6 @@
/* Clock ETC */
SAVE_ITEM(S5P_CLK_OUT),
SAVE_ITEM(S5P_MDNIE_SEL),
-
- /* PWM Register */
- SAVE_ITEM(S3C2410_TCFG0),
- SAVE_ITEM(S3C2410_TCFG1),
- SAVE_ITEM(S3C64XX_TINT_CSTAT),
- SAVE_ITEM(S3C2410_TCON),
- SAVE_ITEM(S3C2410_TCNTB(0)),
- SAVE_ITEM(S3C2410_TCMPB(0)),
- SAVE_ITEM(S3C2410_TCNTO(0)),
};
static int s5pv210_cpu_suspend(unsigned long arg)
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index d04e3bf..835833e 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -11,8 +11,9 @@
select HAVE_SMP
select HAVE_ARM_SCU if SMP
select ARCH_REQUIRE_GPIOLIB
- select ARM_ERRATA_720789
select ARM_ERRATA_754322
+ select ARM_ERRATA_764369
+ select ARM_ERRATA_775420
select PL310_ERRATA_753970 if CACHE_PL310
select PL310_ERRATA_769419 if CACHE_PL310
help
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 5b799c2..5f25256 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -91,7 +91,7 @@
zynq_scu_map_io();
}
-static void zynq_system_reset(char mode, const char *cmd)
+static void zynq_system_reset(enum reboot_mode mode, const char *cmd)
{
zynq_slcr_system_reset();
}
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 6cacdc8..db5c2ca 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -421,24 +421,28 @@
select CPU_USE_DOMAINS if MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select TLS_REG_EMUL if SMP || !MMU
+ select NEED_KUSER_HELPERS
config CPU_32v4
bool
select CPU_USE_DOMAINS if MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select TLS_REG_EMUL if SMP || !MMU
+ select NEED_KUSER_HELPERS
config CPU_32v4T
bool
select CPU_USE_DOMAINS if MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select TLS_REG_EMUL if SMP || !MMU
+ select NEED_KUSER_HELPERS
config CPU_32v5
bool
select CPU_USE_DOMAINS if MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select TLS_REG_EMUL if SMP || !MMU
+ select NEED_KUSER_HELPERS
config CPU_32v6
bool
@@ -776,6 +780,7 @@
config TLS_REG_EMUL
bool
+ select NEED_KUSER_HELPERS
help
An SMP system using a pre-ARMv6 processor (there are apparently
a few prototypes like that in existence) and therefore access to
@@ -783,11 +788,40 @@
config NEEDS_SYSCALL_FOR_CMPXCHG
bool
+ select NEED_KUSER_HELPERS
help
SMP on a pre-ARMv6 processor? Well OK then.
Forget about fast user space cmpxchg support.
It is just not possible.
+config NEED_KUSER_HELPERS
+ bool
+
+config KUSER_HELPERS
+ bool "Enable kuser helpers in vector page" if !NEED_KUSER_HELPERS
+ default y
+ help
+ Warning: disabling this option may break user programs.
+
+ Provide kuser helpers in the vector page. The kernel provides
+ helper code to userspace in read only form at a fixed location
+ in the high vector page to allow userspace to be independent of
+ the CPU type fitted to the system. This permits binaries to be
+ run on ARMv4 through to ARMv7 without modification.
+
+ However, the fixed address nature of these helpers can be used
+ by ROP (return orientated programming) authors when creating
+ exploits.
+
+ If all of the binaries and libraries which run on your platform
+ are built specifically for your platform, and make no use of
+ these helpers, then you can turn this option off. However,
+ when such an binary or library is run, it will receive a SIGILL
+ signal, which will terminate the program.
+
+ Say N here only if you are absolutely certain that you do not
+ need these helpers; otherwise, the safe option is to say Y.
+
config DMA_CACHE_RWFO
bool "Enable read/write for ownership DMA cache maintenance"
depends on CPU_V6K && SMP
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index b55b101..4a05444 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -245,7 +245,8 @@
if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) {
local_flush_bp_all();
local_flush_tlb_all();
- dummy_flush_tlb_a15_erratum();
+ if (erratum_a15_798181())
+ dummy_flush_tlb_a15_erratum();
}
atomic64_set(&per_cpu(active_asids, cpu), asid);
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 4f56617..53cdbd3 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -989,6 +989,7 @@
void __init sanity_check_meminfo(void)
{
+ phys_addr_t memblock_limit = 0;
int i, j, highmem = 0;
phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1;
@@ -1052,9 +1053,32 @@
bank->size = size_limit;
}
#endif
- if (!bank->highmem && bank->start + bank->size > arm_lowmem_limit)
- arm_lowmem_limit = bank->start + bank->size;
+ if (!bank->highmem) {
+ phys_addr_t bank_end = bank->start + bank->size;
+ if (bank_end > arm_lowmem_limit)
+ arm_lowmem_limit = bank_end;
+
+ /*
+ * Find the first non-section-aligned page, and point
+ * memblock_limit at it. This relies on rounding the
+ * limit down to be section-aligned, which happens at
+ * the end of this function.
+ *
+ * With this algorithm, the start or end of almost any
+ * bank can be non-section-aligned. The only exception
+ * is that the start of the bank 0 must be section-
+ * aligned, since otherwise memory would need to be
+ * allocated when mapping the start of bank 0, which
+ * occurs before any free memory is mapped.
+ */
+ if (!memblock_limit) {
+ if (!IS_ALIGNED(bank->start, SECTION_SIZE))
+ memblock_limit = bank->start;
+ else if (!IS_ALIGNED(bank_end, SECTION_SIZE))
+ memblock_limit = bank_end;
+ }
+ }
j++;
}
#ifdef CONFIG_HIGHMEM
@@ -1079,7 +1103,18 @@
#endif
meminfo.nr_banks = j;
high_memory = __va(arm_lowmem_limit - 1) + 1;
- memblock_set_current_limit(arm_lowmem_limit);
+
+ /*
+ * Round the memblock limit down to a section size. This
+ * helps to ensure that we will allocate memory from the
+ * last full section, which should be mapped.
+ */
+ if (memblock_limit)
+ memblock_limit = round_down(memblock_limit, SECTION_SIZE);
+ if (!memblock_limit)
+ memblock_limit = arm_lowmem_limit;
+
+ memblock_set_current_limit(memblock_limit);
}
static inline void prepare_page_table(void)
@@ -1160,7 +1195,7 @@
/*
* Allocate the vector page early.
*/
- vectors = early_alloc(PAGE_SIZE);
+ vectors = early_alloc(PAGE_SIZE * 2);
early_trap_init(vectors);
@@ -1205,15 +1240,27 @@
map.pfn = __phys_to_pfn(virt_to_phys(vectors));
map.virtual = 0xffff0000;
map.length = PAGE_SIZE;
+#ifdef CONFIG_KUSER_HELPERS
map.type = MT_HIGH_VECTORS;
+#else
+ map.type = MT_LOW_VECTORS;
+#endif
create_mapping(&map);
if (!vectors_high()) {
map.virtual = 0;
+ map.length = PAGE_SIZE * 2;
map.type = MT_LOW_VECTORS;
create_mapping(&map);
}
+ /* Now create a kernel read-only mapping */
+ map.pfn += 1;
+ map.virtual = 0xffff0000 + PAGE_SIZE;
+ map.length = PAGE_SIZE;
+ map.type = MT_LOW_VECTORS;
+ create_mapping(&map);
+
/*
* Ask the machine support to map in the statically mapped devices.
*/
@@ -1276,8 +1323,6 @@
{
void *zero_page;
- memblock_set_current_limit(arm_lowmem_limit);
-
build_mem_type_table();
prepare_page_table();
map_lowmem();
diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S
index f64afb9..bdd3be4 100644
--- a/arch/arm/mm/proc-v7-2level.S
+++ b/arch/arm/mm/proc-v7-2level.S
@@ -110,7 +110,7 @@
ARM( str r3, [r0, #2048]! )
THUMB( add r0, r0, #2048 )
THUMB( str r3, [r0] )
- ALT_SMP(mov pc,lr)
+ ALT_SMP(W(nop))
ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte
#endif
mov pc, lr
diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S
index c36ac69..01a719e 100644
--- a/arch/arm/mm/proc-v7-3level.S
+++ b/arch/arm/mm/proc-v7-3level.S
@@ -81,7 +81,7 @@
tst r3, #1 << (55 - 32) @ L_PTE_DIRTY
orreq r2, #L_PTE_RDONLY
1: strd r2, r3, [r0]
- ALT_SMP(mov pc, lr)
+ ALT_SMP(W(nop))
ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte
#endif
mov pc, lr
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 5c6d5a3..73398bc 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -75,13 +75,14 @@
ENDPROC(cpu_v7_do_idle)
ENTRY(cpu_v7_dcache_clean_area)
- ALT_SMP(mov pc, lr) @ MP extensions imply L1 PTW
- ALT_UP(W(nop))
- dcache_line_size r2, r3
-1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ ALT_SMP(W(nop)) @ MP extensions imply L1 PTW
+ ALT_UP_B(1f)
+ mov pc, lr
+1: dcache_line_size r2, r3
+2: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, r2
subs r1, r1, r2
- bhi 1b
+ bhi 2b
dsb
mov pc, lr
ENDPROC(cpu_v7_dcache_clean_area)
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 3dc5cbe..7dfba93 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -25,10 +25,16 @@
select S5P_GPIO_DRVSTR
select SAMSUNG_CLKSRC if !COMMON_CLK
select SAMSUNG_GPIOLIB_4BIT
- select SAMSUNG_IRQ_VIC_TIMER
help
Base platform code for Samsung's S5P series SoC.
+config SAMSUNG_PM
+ bool
+ depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || S5P_PM)
+ default y
+ help
+ Base platform power management code for samsung code
+
if PLAT_SAMSUNG
# boot configurations
@@ -72,14 +78,6 @@
if SAMSUNG_ATAGS
-# timer options
-
-config SAMSUNG_HRT
- bool
- select SAMSUNG_DEV_PWM
- help
- Use the High Resolution timer support
-
# clock options
config SAMSUNG_CLOCK
@@ -99,11 +97,6 @@
# options for IRQ support
-config SAMSUNG_IRQ_VIC_TIMER
- bool
- help
- Internal configuration to build the VIC timer interrupt code.
-
config S5P_IRQ
def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
help
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 98d07d8..498c7c2 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -12,15 +12,12 @@
# Objects we always build independent of SoC choice
obj-y += init.o cpu.o
-obj-$(CONFIG_SAMSUNG_HRT) += samsung-time.o
obj-$(CONFIG_SAMSUNG_CLOCK) += clock.o
-obj-$(CONFIG_SAMSUNG_CLOCK) += pwm-clock.o
obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o
obj-$(CONFIG_S5P_CLOCK) += s5p-clock.o
-obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
obj-$(CONFIG_S5P_IRQ) += s5p-irq.o
obj-$(CONFIG_S5P_EXT_INT) += s5p-irq-eint.o
obj-$(CONFIG_S5P_GPIO_INT) += s5p-irq-gpioint.o
@@ -51,7 +48,7 @@
# PM support
-obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_SAMSUNG_PM) += pm.o
obj-$(CONFIG_SAMSUNG_PM_GPIO) += pm-gpio.o
obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o
diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c
index 5f197dc..d51f956 100644
--- a/arch/arm/plat-samsung/dev-backlight.c
+++ b/arch/arm/plat-samsung/dev-backlight.c
@@ -20,13 +20,18 @@
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
+struct samsung_bl_drvdata {
+ struct platform_pwm_backlight_data plat_data;
+ struct samsung_bl_gpio_info *gpio_info;
+};
+
static int samsung_bl_init(struct device *dev)
{
int ret = 0;
- struct platform_device *timer_dev =
- container_of(dev->parent, struct platform_device, dev);
- struct samsung_bl_gpio_info *bl_gpio_info =
- timer_dev->dev.platform_data;
+ struct platform_pwm_backlight_data *pdata = dev->platform_data;
+ struct samsung_bl_drvdata *drvdata = container_of(pdata,
+ struct samsung_bl_drvdata, plat_data);
+ struct samsung_bl_gpio_info *bl_gpio_info = drvdata->gpio_info;
ret = gpio_request(bl_gpio_info->no, "Backlight");
if (ret) {
@@ -42,10 +47,10 @@
static void samsung_bl_exit(struct device *dev)
{
- struct platform_device *timer_dev =
- container_of(dev->parent, struct platform_device, dev);
- struct samsung_bl_gpio_info *bl_gpio_info =
- timer_dev->dev.platform_data;
+ struct platform_pwm_backlight_data *pdata = dev->platform_data;
+ struct samsung_bl_drvdata *drvdata = container_of(pdata,
+ struct samsung_bl_drvdata, plat_data);
+ struct samsung_bl_gpio_info *bl_gpio_info = drvdata->gpio_info;
s3c_gpio_cfgpin(bl_gpio_info->no, S3C_GPIO_OUTPUT);
gpio_free(bl_gpio_info->no);
@@ -60,12 +65,14 @@
* for their specific boards
*/
-static struct platform_pwm_backlight_data samsung_dfl_bl_data __initdata = {
- .max_brightness = 255,
- .dft_brightness = 255,
- .pwm_period_ns = 78770,
- .init = samsung_bl_init,
- .exit = samsung_bl_exit,
+static struct samsung_bl_drvdata samsung_dfl_bl_data __initdata = {
+ .plat_data = {
+ .max_brightness = 255,
+ .dft_brightness = 255,
+ .pwm_period_ns = 78770,
+ .init = samsung_bl_init,
+ .exit = samsung_bl_exit,
+ },
};
static struct platform_device samsung_dfl_bl_device __initdata = {
@@ -82,6 +89,7 @@
{
int ret = 0;
struct platform_device *samsung_bl_device;
+ struct samsung_bl_drvdata *samsung_bl_drvdata;
struct platform_pwm_backlight_data *samsung_bl_data;
samsung_bl_device = kmemdup(&samsung_dfl_bl_device,
@@ -91,17 +99,19 @@
return;
}
- samsung_bl_data = s3c_set_platdata(&samsung_dfl_bl_data,
- sizeof(struct platform_pwm_backlight_data), samsung_bl_device);
- if (!samsung_bl_data) {
+ samsung_bl_drvdata = kmemdup(&samsung_dfl_bl_data,
+ sizeof(samsung_dfl_bl_data), GFP_KERNEL);
+ if (!samsung_bl_drvdata) {
printk(KERN_ERR "%s: no memory for platform dev\n", __func__);
goto err_data;
}
+ samsung_bl_device->dev.platform_data = &samsung_bl_drvdata->plat_data;
+ samsung_bl_drvdata->gpio_info = gpio_info;
+ samsung_bl_data = &samsung_bl_drvdata->plat_data;
/* Copy board specific data provided by user */
samsung_bl_data->pwm_id = bl_data->pwm_id;
- samsung_bl_device->dev.parent =
- &s3c_device_timer[samsung_bl_data->pwm_id].dev;
+ samsung_bl_device->dev.parent = &samsung_device_pwm.dev;
if (bl_data->max_brightness)
samsung_bl_data->max_brightness = bl_data->max_brightness;
@@ -122,17 +132,6 @@
if (bl_data->check_fb)
samsung_bl_data->check_fb = bl_data->check_fb;
- /* Keep the GPIO info for future use */
- s3c_device_timer[samsung_bl_data->pwm_id].dev.platform_data = gpio_info;
-
- /* Register the specific PWM timer dev for Backlight control */
- ret = platform_device_register(
- &s3c_device_timer[samsung_bl_data->pwm_id]);
- if (ret) {
- printk(KERN_ERR "failed to register pwm timer for backlight: %d\n", ret);
- goto err_plat_reg1;
- }
-
/* Register the Backlight dev */
ret = platform_device_register(samsung_bl_device);
if (ret) {
@@ -143,8 +142,6 @@
return;
err_plat_reg2:
- platform_device_unregister(&s3c_device_timer[samsung_bl_data->pwm_id]);
-err_plat_reg1:
kfree(samsung_bl_data);
err_data:
kfree(samsung_bl_device);
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 0f9c3f4..8ce0ac0 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -58,6 +58,7 @@
#include <plat/keypad.h>
#include <linux/platform_data/mmc-s3cmci.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <plat/pwm-core.h>
#include <plat/sdhci.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
@@ -1097,36 +1098,21 @@
/* PWM Timer */
#ifdef CONFIG_SAMSUNG_DEV_PWM
-
-#define TIMER_RESOURCE_SIZE (1)
-
-#define TIMER_RESOURCE(_tmr, _irq) \
- (struct resource [TIMER_RESOURCE_SIZE]) { \
- [0] = { \
- .start = _irq, \
- .end = _irq, \
- .flags = IORESOURCE_IRQ \
- } \
- }
-
-#define DEFINE_S3C_TIMER(_tmr_no, _irq) \
- .name = "s3c24xx-pwm", \
- .id = _tmr_no, \
- .num_resources = TIMER_RESOURCE_SIZE, \
- .resource = TIMER_RESOURCE(_tmr_no, _irq), \
-
-/*
- * since we already have an static mapping for the timer,
- * we do not bother setting any IO resource for the base.
- */
-
-struct platform_device s3c_device_timer[] = {
- [0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
- [1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
- [2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
- [3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
- [4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
+static struct resource samsung_pwm_resource[] = {
+ DEFINE_RES_MEM(SAMSUNG_PA_TIMER, SZ_4K),
};
+
+struct platform_device samsung_device_pwm = {
+ .name = "samsung-pwm",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(samsung_pwm_resource),
+ .resource = samsung_pwm_resource,
+};
+
+void __init samsung_pwm_set_platdata(struct samsung_pwm_variant *pd)
+{
+ samsung_device_pwm.dev.platform_data = pd;
+}
#endif /* CONFIG_SAMSUNG_DEV_PWM */
/* RTC */
diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
index a62753d..63239f4 100644
--- a/arch/arm/plat-samsung/include/plat/clock.h
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -83,6 +83,11 @@
extern struct clksrc_clk clk_epllref;
extern struct clksrc_clk clk_esysclk;
+/* S3C24XX UART clocks */
+extern struct clk s3c24xx_clk_uart0;
+extern struct clk s3c24xx_clk_uart1;
+extern struct clk s3c24xx_clk_uart2;
+
/* S3C64XX specific clocks */
extern struct clk clk_h2;
extern struct clk clk_27m;
@@ -140,10 +145,6 @@
extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable);
-/* Init for pwm clock code */
-
-extern void s3c_pwmclk_init(void);
-
/* Global watchdog clock used by arch_wtd_reset() callback */
extern struct clk *s3c2410_wdtclk;
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 87d501f..0dc4ac4 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -134,6 +134,7 @@
extern struct platform_device samsung_asoc_idma;
extern struct platform_device samsung_device_keypad;
+extern struct platform_device samsung_device_pwm;
/* s3c2440 specific devices */
diff --git a/arch/arm/plat-samsung/include/plat/irq-vic-timer.h b/arch/arm/plat-samsung/include/plat/irq-vic-timer.h
deleted file mode 100644
index 5b9c42f..0000000
--- a/arch/arm/plat-samsung/include/plat/irq-vic-timer.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/irq-vic-timer.h
- *
- * Copyright (c) 2010 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for Samsung SoC IRQ VIC timer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern void s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq);
diff --git a/arch/arm/plat-samsung/include/plat/irqs.h b/arch/arm/plat-samsung/include/plat/irqs.h
index df46b77..039001c 100644
--- a/arch/arm/plat-samsung/include/plat/irqs.h
+++ b/arch/arm/plat-samsung/include/plat/irqs.h
@@ -44,15 +44,6 @@
#define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x))
#define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x))
-#define S5P_TIMER_IRQ(x) (IRQ_TIMER_BASE + (x))
-
-#define IRQ_TIMER0 S5P_TIMER_IRQ(0)
-#define IRQ_TIMER1 S5P_TIMER_IRQ(1)
-#define IRQ_TIMER2 S5P_TIMER_IRQ(2)
-#define IRQ_TIMER3 S5P_TIMER_IRQ(3)
-#define IRQ_TIMER4 S5P_TIMER_IRQ(4)
-#define IRQ_TIMER_COUNT (5)
-
#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \
: ((x) - 16 + S5P_EINT_BASE2))
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index 5d47ca3..6bc1a8f 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -19,7 +19,7 @@
struct device;
-#ifdef CONFIG_PM
+#ifdef CONFIG_SAMSUNG_PM
extern __init int s3c_pm_init(void);
extern __init int s3c64xx_pm_init(void);
@@ -58,8 +58,6 @@
/* from sleep.S */
-extern void s3c_cpu_resume(void);
-
extern int s3c2410_cpu_suspend(unsigned long);
/* sleep save info */
@@ -106,12 +104,14 @@
extern void s3c_pm_do_restore(struct sleep_save *ptr, int count);
extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count);
-#ifdef CONFIG_PM
+#ifdef CONFIG_SAMSUNG_PM
extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
+extern void s3c_cpu_resume(void);
#else
#define s3c_irq_wake NULL
#define s3c_irqext_wake NULL
+#define s3c_cpu_resume NULL
#endif
/* PM debug functions */
diff --git a/arch/arm/plat-samsung/include/plat/pwm-clock.h b/arch/arm/plat-samsung/include/plat/pwm-clock.h
deleted file mode 100644
index bf6a60e..0000000
--- a/arch/arm/plat-samsung/include/plat/pwm-clock.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/pwm-clock.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * SAMSUNG - pwm clock and timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_PWM_CLOCK_H
-#define __ASM_PLAT_PWM_CLOCK_H __FILE__
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
- if (soc_is_s3c24xx())
- return tcfg == S3C2410_TCFG1_MUX_TCLK;
- else if (soc_is_s3c64xx() || soc_is_s5pc100())
- return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
- else if (soc_is_s5p6440() || soc_is_s5p6450())
- return 0;
- else
- return tcfg == S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
- if (soc_is_s3c24xx())
- return 1 << (tcfg1 + 1);
- else
- return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
- if (soc_is_s3c24xx())
- return 0;
- else
- return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
- if (soc_is_s3c24xx())
- return ilog2(div) - 1;
- else
- return ilog2(div);
-}
-#endif /* __ASM_PLAT_PWM_CLOCK_H */
diff --git a/arch/arm/plat-samsung/include/plat/pwm-core.h b/arch/arm/plat-samsung/include/plat/pwm-core.h
new file mode 100644
index 0000000..5bff1fa
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/pwm-core.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung PWM controller platform data helpers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_PWM_CORE_H
+#define __ASM_ARCH_PWM_CORE_H __FILE__
+
+#include <clocksource/samsung_pwm.h>
+
+#ifdef CONFIG_SAMSUNG_DEV_PWM
+extern void samsung_pwm_set_platdata(struct samsung_pwm_variant *pd);
+#else
+static inline void samsung_pwm_set_platdata(struct samsung_pwm_variant *pd) { }
+#endif
+
+#endif /* __ASM_ARCH_PWM_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/regs-timer.h b/arch/arm/plat-samsung/include/plat/regs-timer.h
deleted file mode 100644
index d097d92..0000000
--- a/arch/arm/plat-samsung/include/plat/regs-timer.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-timer.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Timer configuration
-*/
-
-#ifndef __ASM_ARCH_REGS_TIMER_H
-#define __ASM_ARCH_REGS_TIMER_H
-
-#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x))
-#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c))
-
-#define S3C2410_TCFG0 S3C_TIMERREG(0x00)
-#define S3C2410_TCFG1 S3C_TIMERREG(0x04)
-#define S3C2410_TCON S3C_TIMERREG(0x08)
-
-#define S3C64XX_TINT_CSTAT S3C_TIMERREG(0x44)
-
-#define S3C2410_TCFG_PRESCALER0_MASK (255<<0)
-#define S3C2410_TCFG_PRESCALER1_MASK (255<<8)
-#define S3C2410_TCFG_PRESCALER1_SHIFT (8)
-#define S3C2410_TCFG_DEADZONE_MASK (255<<16)
-#define S3C2410_TCFG_DEADZONE_SHIFT (16)
-
-#define S3C2410_TCFG1_MUX4_DIV2 (0<<16)
-#define S3C2410_TCFG1_MUX4_DIV4 (1<<16)
-#define S3C2410_TCFG1_MUX4_DIV8 (2<<16)
-#define S3C2410_TCFG1_MUX4_DIV16 (3<<16)
-#define S3C2410_TCFG1_MUX4_TCLK1 (4<<16)
-#define S3C2410_TCFG1_MUX4_MASK (15<<16)
-#define S3C2410_TCFG1_MUX4_SHIFT (16)
-
-#define S3C2410_TCFG1_MUX3_DIV2 (0<<12)
-#define S3C2410_TCFG1_MUX3_DIV4 (1<<12)
-#define S3C2410_TCFG1_MUX3_DIV8 (2<<12)
-#define S3C2410_TCFG1_MUX3_DIV16 (3<<12)
-#define S3C2410_TCFG1_MUX3_TCLK1 (4<<12)
-#define S3C2410_TCFG1_MUX3_MASK (15<<12)
-
-
-#define S3C2410_TCFG1_MUX2_DIV2 (0<<8)
-#define S3C2410_TCFG1_MUX2_DIV4 (1<<8)
-#define S3C2410_TCFG1_MUX2_DIV8 (2<<8)
-#define S3C2410_TCFG1_MUX2_DIV16 (3<<8)
-#define S3C2410_TCFG1_MUX2_TCLK1 (4<<8)
-#define S3C2410_TCFG1_MUX2_MASK (15<<8)
-
-
-#define S3C2410_TCFG1_MUX1_DIV2 (0<<4)
-#define S3C2410_TCFG1_MUX1_DIV4 (1<<4)
-#define S3C2410_TCFG1_MUX1_DIV8 (2<<4)
-#define S3C2410_TCFG1_MUX1_DIV16 (3<<4)
-#define S3C2410_TCFG1_MUX1_TCLK0 (4<<4)
-#define S3C2410_TCFG1_MUX1_MASK (15<<4)
-
-#define S3C2410_TCFG1_MUX0_DIV2 (0<<0)
-#define S3C2410_TCFG1_MUX0_DIV4 (1<<0)
-#define S3C2410_TCFG1_MUX0_DIV8 (2<<0)
-#define S3C2410_TCFG1_MUX0_DIV16 (3<<0)
-#define S3C2410_TCFG1_MUX0_TCLK0 (4<<0)
-#define S3C2410_TCFG1_MUX0_MASK (15<<0)
-
-#define S3C2410_TCFG1_MUX_DIV2 (0<<0)
-#define S3C2410_TCFG1_MUX_DIV4 (1<<0)
-#define S3C2410_TCFG1_MUX_DIV8 (2<<0)
-#define S3C2410_TCFG1_MUX_DIV16 (3<<0)
-#define S3C2410_TCFG1_MUX_TCLK (4<<0)
-#define S3C2410_TCFG1_MUX_MASK (15<<0)
-
-#define S3C64XX_TCFG1_MUX_DIV1 (0<<0)
-#define S3C64XX_TCFG1_MUX_DIV2 (1<<0)
-#define S3C64XX_TCFG1_MUX_DIV4 (2<<0)
-#define S3C64XX_TCFG1_MUX_DIV8 (3<<0)
-#define S3C64XX_TCFG1_MUX_DIV16 (4<<0)
-#define S3C64XX_TCFG1_MUX_TCLK (5<<0) /* 3 sets of TCLK */
-#define S3C64XX_TCFG1_MUX_MASK (15<<0)
-
-#define S3C2410_TCFG1_SHIFT(x) ((x) * 4)
-
-/* for each timer, we have an count buffer, an compare buffer and
- * an observation buffer
-*/
-
-/* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */
-
-#define S3C2410_TCNTB(tmr) S3C_TIMERREG2(tmr, 0x00)
-#define S3C2410_TCMPB(tmr) S3C_TIMERREG2(tmr, 0x04)
-#define S3C2410_TCNTO(tmr) S3C_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08))
-
-#define S3C2410_TCON_T4RELOAD (1<<22)
-#define S3C2410_TCON_T4MANUALUPD (1<<21)
-#define S3C2410_TCON_T4START (1<<20)
-
-#define S3C2410_TCON_T3RELOAD (1<<19)
-#define S3C2410_TCON_T3INVERT (1<<18)
-#define S3C2410_TCON_T3MANUALUPD (1<<17)
-#define S3C2410_TCON_T3START (1<<16)
-
-#define S3C2410_TCON_T2RELOAD (1<<15)
-#define S3C2410_TCON_T2INVERT (1<<14)
-#define S3C2410_TCON_T2MANUALUPD (1<<13)
-#define S3C2410_TCON_T2START (1<<12)
-
-#define S3C2410_TCON_T1RELOAD (1<<11)
-#define S3C2410_TCON_T1INVERT (1<<10)
-#define S3C2410_TCON_T1MANUALUPD (1<<9)
-#define S3C2410_TCON_T1START (1<<8)
-
-#define S3C2410_TCON_T0DEADZONE (1<<4)
-#define S3C2410_TCON_T0RELOAD (1<<3)
-#define S3C2410_TCON_T0INVERT (1<<2)
-#define S3C2410_TCON_T0MANUALUPD (1<<1)
-#define S3C2410_TCON_T0START (1<<0)
-
-#endif /* __ASM_ARCH_REGS_TIMER_H */
-
-
-
diff --git a/arch/arm/plat-samsung/include/plat/samsung-time.h b/arch/arm/plat-samsung/include/plat/samsung-time.h
index 4cc99bb..209464a 100644
--- a/arch/arm/plat-samsung/include/plat/samsung-time.h
+++ b/arch/arm/plat-samsung/include/plat/samsung-time.h
@@ -22,29 +22,6 @@
SAMSUNG_PWM4,
};
-struct samsung_timer_source {
- unsigned int event_id;
- unsigned int source_id;
-};
-
-/* Be able to sleep for atleast 4 seconds (usually more) */
-#define SAMSUNG_TIMER_MIN_RANGE 4
-
-#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S5PC100)
-#define TCNT_MAX 0xffff
-#define TSCALER_DIV 25
-#define TDIV 50
-#define TSIZE 16
-#else
-#define TCNT_MAX 0xffffffff
-#define TSCALER_DIV 2
-#define TDIV 2
-#define TSIZE 32
-#endif
-
-#define NON_PERIODIC 0
-#define PERIODIC 1
-
extern void __init samsung_set_timer_source(enum samsung_timer_mode event,
enum samsung_timer_mode source);
diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c
deleted file mode 100644
index 0fceb42..0000000
--- a/arch/arm/plat-samsung/irq-vic-timer.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/* arch/arm/plat-samsung/irq-vic-timer.c
- * originally part of arch/arm/plat-s3c64xx/irq.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/irqchip/chained_irq.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <plat/cpu.h>
-#include <plat/irq-vic-timer.h>
-#include <plat/regs-timer.h>
-
-static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_get_chip(irq);
- chained_irq_enter(chip, desc);
- generic_handle_irq((int)desc->irq_data.handler_data);
- chained_irq_exit(chip, desc);
-}
-
-/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
-static void s3c_irq_timer_ack(struct irq_data *d)
-{
- struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
- u32 mask = (1 << 5) << (d->irq - gc->irq_base);
-
- irq_reg_writel(mask | gc->mask_cache, gc->reg_base);
-}
-
-/**
- * s3c_init_vic_timer_irq() - initialise timer irq chanined off VIC.\
- * @num: Number of timers to initialize
- * @timer_irq: Base IRQ number to be used for the timers.
- *
- * Register the necessary IRQ chaining and support for the timer IRQs
- * chained of the VIC.
- */
-void __init s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq)
-{
- unsigned int pirq[5] = { IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
- IRQ_TIMER3_VIC, IRQ_TIMER4_VIC };
- struct irq_chip_generic *s3c_tgc;
- struct irq_chip_type *ct;
- unsigned int i;
-
-#ifdef CONFIG_ARCH_EXYNOS
- if (soc_is_exynos5250()) {
- pirq[0] = EXYNOS5_IRQ_TIMER0_VIC;
- pirq[1] = EXYNOS5_IRQ_TIMER1_VIC;
- pirq[2] = EXYNOS5_IRQ_TIMER2_VIC;
- pirq[3] = EXYNOS5_IRQ_TIMER3_VIC;
- pirq[4] = EXYNOS5_IRQ_TIMER4_VIC;
- } else {
- pirq[0] = EXYNOS4_IRQ_TIMER0_VIC;
- pirq[1] = EXYNOS4_IRQ_TIMER1_VIC;
- pirq[2] = EXYNOS4_IRQ_TIMER2_VIC;
- pirq[3] = EXYNOS4_IRQ_TIMER3_VIC;
- pirq[4] = EXYNOS4_IRQ_TIMER4_VIC;
- }
-#endif
- s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq,
- S3C64XX_TINT_CSTAT, handle_level_irq);
-
- if (!s3c_tgc) {
- pr_err("%s: irq_alloc_generic_chip for IRQ %d failed\n",
- __func__, timer_irq);
- return;
- }
-
- ct = s3c_tgc->chip_types;
- ct->chip.irq_mask = irq_gc_mask_clr_bit;
- ct->chip.irq_unmask = irq_gc_mask_set_bit;
- ct->chip.irq_ack = s3c_irq_timer_ack;
- irq_setup_generic_chip(s3c_tgc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
- IRQ_NOREQUEST | IRQ_NOPROBE, 0);
- /* Clear the upper bits of the mask_cache*/
- s3c_tgc->mask_cache &= 0x1f;
-
- for (i = 0; i < num; i++, timer_irq++) {
- irq_set_chained_handler(pirq[i], s3c_irq_demux_vic_timer);
- irq_set_handler_data(pirq[i], (void *)timer_irq);
- }
-}
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index ea36136..d0c2301 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -80,7 +80,7 @@
#ifdef CONFIG_SAMSUNG_PM_DEBUG
-static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
+static struct pm_uart_save uart_save;
static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
{
@@ -101,11 +101,7 @@
static void s3c_pm_save_uarts(void)
{
- struct pm_uart_save *save = uart_save;
- unsigned int uart;
-
- for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
- s3c_pm_save_uart(uart, save);
+ s3c_pm_save_uart(CONFIG_DEBUG_S3C_UART, &uart_save);
}
static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
@@ -126,11 +122,7 @@
static void s3c_pm_restore_uarts(void)
{
- struct pm_uart_save *save = uart_save;
- unsigned int uart;
-
- for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
- s3c_pm_restore_uart(uart, save);
+ s3c_pm_restore_uart(CONFIG_DEBUG_S3C_UART, &uart_save);
}
#else
static void s3c_pm_save_uarts(void) { }
diff --git a/arch/arm/plat-samsung/pwm-clock.c b/arch/arm/plat-samsung/pwm-clock.c
deleted file mode 100644
index a35ff3b..0000000
--- a/arch/arm/plat-samsung/pwm-clock.c
+++ /dev/null
@@ -1,474 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/pwm-clock.c
- *
- * Copyright (c) 2007 Simtec Electronics
- * Copyright (c) 2007, 2008 Ben Dooks
- * Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/log2.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/irq.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-#include <plat/regs-timer.h>
-#include <plat/pwm-clock.h>
-
-/* Each of the timers 0 through 5 go through the following
- * clock tree, with the inputs depending on the timers.
- *
- * pclk ---- [ prescaler 0 ] -+---> timer 0
- * +---> timer 1
- *
- * pclk ---- [ prescaler 1 ] -+---> timer 2
- * +---> timer 3
- * \---> timer 4
- *
- * Which are fed into the timers as so:
- *
- * prescaled 0 ---- [ div 2,4,8,16 ] ---\
- * [mux] -> timer 0
- * tclk 0 ------------------------------/
- *
- * prescaled 0 ---- [ div 2,4,8,16 ] ---\
- * [mux] -> timer 1
- * tclk 0 ------------------------------/
- *
- *
- * prescaled 1 ---- [ div 2,4,8,16 ] ---\
- * [mux] -> timer 2
- * tclk 1 ------------------------------/
- *
- * prescaled 1 ---- [ div 2,4,8,16 ] ---\
- * [mux] -> timer 3
- * tclk 1 ------------------------------/
- *
- * prescaled 1 ---- [ div 2,4,8, 16 ] --\
- * [mux] -> timer 4
- * tclk 1 ------------------------------/
- *
- * Since the mux and the divider are tied together in the
- * same register space, it is impossible to set the parent
- * and the rate at the same time. To avoid this, we add an
- * intermediate 'prescaled-and-divided' clock to select
- * as the parent for the timer input clock called tdiv.
- *
- * prescaled clk --> pwm-tdiv ---\
- * [ mux ] --> timer X
- * tclk -------------------------/
-*/
-
-static struct clk clk_timer_scaler[];
-
-static unsigned long clk_pwm_scaler_get_rate(struct clk *clk)
-{
- unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0);
-
- if (clk == &clk_timer_scaler[1]) {
- tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK;
- tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT;
- } else {
- tcfg0 &= S3C2410_TCFG_PRESCALER0_MASK;
- }
-
- return clk_get_rate(clk->parent) / (tcfg0 + 1);
-}
-
-static unsigned long clk_pwm_scaler_round_rate(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long divisor = parent_rate / rate;
-
- if (divisor > 256)
- divisor = 256;
- else if (divisor < 2)
- divisor = 2;
-
- return parent_rate / divisor;
-}
-
-static int clk_pwm_scaler_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long round = clk_pwm_scaler_round_rate(clk, rate);
- unsigned long tcfg0;
- unsigned long divisor;
- unsigned long flags;
-
- divisor = clk_get_rate(clk->parent) / round;
- divisor--;
-
- local_irq_save(flags);
- tcfg0 = __raw_readl(S3C2410_TCFG0);
-
- if (clk == &clk_timer_scaler[1]) {
- tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
- tcfg0 |= divisor << S3C2410_TCFG_PRESCALER1_SHIFT;
- } else {
- tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
- tcfg0 |= divisor;
- }
-
- __raw_writel(tcfg0, S3C2410_TCFG0);
- local_irq_restore(flags);
-
- return 0;
-}
-
-static struct clk_ops clk_pwm_scaler_ops = {
- .get_rate = clk_pwm_scaler_get_rate,
- .set_rate = clk_pwm_scaler_set_rate,
- .round_rate = clk_pwm_scaler_round_rate,
-};
-
-static struct clk clk_timer_scaler[] = {
- [0] = {
- .name = "pwm-scaler0",
- .id = -1,
- .ops = &clk_pwm_scaler_ops,
- },
- [1] = {
- .name = "pwm-scaler1",
- .id = -1,
- .ops = &clk_pwm_scaler_ops,
- },
-};
-
-static struct clk clk_timer_tclk[] = {
- [0] = {
- .name = "pwm-tclk0",
- .id = -1,
- },
- [1] = {
- .name = "pwm-tclk1",
- .id = -1,
- },
-};
-
-struct pwm_tdiv_clk {
- struct clk clk;
- unsigned int divisor;
-};
-
-static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk)
-{
- return container_of(clk, struct pwm_tdiv_clk, clk);
-}
-
-static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk)
-{
- unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
- unsigned int divisor;
-
- tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
- tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
- if (pwm_cfg_src_is_tclk(tcfg1))
- divisor = to_tdiv(clk)->divisor;
- else
- divisor = tcfg_to_divisor(tcfg1);
-
- return clk_get_rate(clk->parent) / divisor;
-}
-
-static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent_rate;
- unsigned long divisor;
-
- parent_rate = clk_get_rate(clk->parent);
- divisor = parent_rate / rate;
-
- if (divisor <= 1 && pwm_tdiv_has_div1())
- divisor = 1;
- else if (divisor <= 2)
- divisor = 2;
- else if (divisor <= 4)
- divisor = 4;
- else if (divisor <= 8)
- divisor = 8;
- else
- divisor = 16;
-
- return parent_rate / divisor;
-}
-
-static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk)
-{
- return pwm_tdiv_div_bits(divclk->divisor);
-}
-
-static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk)
-{
- unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
- unsigned long bits = clk_pwm_tdiv_bits(divclk);
- unsigned long flags;
- unsigned long shift = S3C2410_TCFG1_SHIFT(divclk->clk.id);
-
- local_irq_save(flags);
-
- tcfg1 = __raw_readl(S3C2410_TCFG1);
- tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
- tcfg1 |= bits << shift;
- __raw_writel(tcfg1, S3C2410_TCFG1);
-
- local_irq_restore(flags);
-}
-
-static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
-{
- struct pwm_tdiv_clk *divclk = to_tdiv(clk);
- unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long divisor;
-
- tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
- tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
- rate = clk_round_rate(clk, rate);
- divisor = parent_rate / rate;
-
- if (divisor > 16)
- return -EINVAL;
-
- divclk->divisor = divisor;
-
- /* Update the current MUX settings if we are currently
- * selected as the clock source for this clock. */
-
- if (!pwm_cfg_src_is_tclk(tcfg1))
- clk_pwm_tdiv_update(divclk);
-
- return 0;
-}
-
-static struct clk_ops clk_tdiv_ops = {
- .get_rate = clk_pwm_tdiv_get_rate,
- .set_rate = clk_pwm_tdiv_set_rate,
- .round_rate = clk_pwm_tdiv_round_rate,
-};
-
-static struct pwm_tdiv_clk clk_timer_tdiv[] = {
- [0] = {
- .clk = {
- .name = "pwm-tdiv",
- .devname = "s3c24xx-pwm.0",
- .ops = &clk_tdiv_ops,
- .parent = &clk_timer_scaler[0],
- },
- },
- [1] = {
- .clk = {
- .name = "pwm-tdiv",
- .devname = "s3c24xx-pwm.1",
- .ops = &clk_tdiv_ops,
- .parent = &clk_timer_scaler[0],
- }
- },
- [2] = {
- .clk = {
- .name = "pwm-tdiv",
- .devname = "s3c24xx-pwm.2",
- .ops = &clk_tdiv_ops,
- .parent = &clk_timer_scaler[1],
- },
- },
- [3] = {
- .clk = {
- .name = "pwm-tdiv",
- .devname = "s3c24xx-pwm.3",
- .ops = &clk_tdiv_ops,
- .parent = &clk_timer_scaler[1],
- },
- },
- [4] = {
- .clk = {
- .name = "pwm-tdiv",
- .devname = "s3c24xx-pwm.4",
- .ops = &clk_tdiv_ops,
- .parent = &clk_timer_scaler[1],
- },
- },
-};
-
-static int __init clk_pwm_tdiv_register(unsigned int id)
-{
- struct pwm_tdiv_clk *divclk = &clk_timer_tdiv[id];
- unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-
- tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
- tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
- divclk->clk.id = id;
- divclk->divisor = tcfg_to_divisor(tcfg1);
-
- return s3c24xx_register_clock(&divclk->clk);
-}
-
-static inline struct clk *s3c24xx_pwmclk_tclk(unsigned int id)
-{
- return (id >= 2) ? &clk_timer_tclk[1] : &clk_timer_tclk[0];
-}
-
-static inline struct clk *s3c24xx_pwmclk_tdiv(unsigned int id)
-{
- return &clk_timer_tdiv[id].clk;
-}
-
-static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
-{
- unsigned int id = clk->id;
- unsigned long tcfg1;
- unsigned long flags;
- unsigned long bits;
- unsigned long shift = S3C2410_TCFG1_SHIFT(id);
-
- unsigned long mux_tclk;
-
- if (soc_is_s3c24xx())
- mux_tclk = S3C2410_TCFG1_MUX_TCLK;
- else if (soc_is_s5p6440() || soc_is_s5p6450())
- mux_tclk = 0;
- else
- mux_tclk = S3C64XX_TCFG1_MUX_TCLK;
-
- if (parent == s3c24xx_pwmclk_tclk(id))
- bits = mux_tclk << shift;
- else if (parent == s3c24xx_pwmclk_tdiv(id))
- bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- local_irq_save(flags);
-
- tcfg1 = __raw_readl(S3C2410_TCFG1);
- tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
- __raw_writel(tcfg1 | bits, S3C2410_TCFG1);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-static struct clk_ops clk_tin_ops = {
- .set_parent = clk_pwm_tin_set_parent,
-};
-
-static struct clk clk_tin[] = {
- [0] = {
- .name = "pwm-tin",
- .devname = "s3c24xx-pwm.0",
- .id = 0,
- .ops = &clk_tin_ops,
- },
- [1] = {
- .name = "pwm-tin",
- .devname = "s3c24xx-pwm.1",
- .id = 1,
- .ops = &clk_tin_ops,
- },
- [2] = {
- .name = "pwm-tin",
- .devname = "s3c24xx-pwm.2",
- .id = 2,
- .ops = &clk_tin_ops,
- },
- [3] = {
- .name = "pwm-tin",
- .devname = "s3c24xx-pwm.3",
- .id = 3,
- .ops = &clk_tin_ops,
- },
- [4] = {
- .name = "pwm-tin",
- .devname = "s3c24xx-pwm.4",
- .id = 4,
- .ops = &clk_tin_ops,
- },
-};
-
-static __init int clk_pwm_tin_register(struct clk *pwm)
-{
- unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
- unsigned int id = pwm->id;
-
- struct clk *parent;
- int ret;
-
- ret = s3c24xx_register_clock(pwm);
- if (ret < 0)
- return ret;
-
- tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
- tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
- if (pwm_cfg_src_is_tclk(tcfg1))
- parent = s3c24xx_pwmclk_tclk(id);
- else
- parent = s3c24xx_pwmclk_tdiv(id);
-
- return clk_set_parent(pwm, parent);
-}
-
-/**
- * s3c_pwmclk_init() - initialise pwm clocks
- *
- * Initialise and register the clocks which provide the inputs for the
- * pwm timer blocks.
- *
- * Note, this call is required by the time core, so must be called after
- * the base clocks are added and before any of the initcalls are run.
- */
-__init void s3c_pwmclk_init(void)
-{
- struct clk *clk_timers;
- unsigned int clk;
- int ret;
-
- clk_timers = clk_get(NULL, "timers");
- if (IS_ERR(clk_timers)) {
- printk(KERN_ERR "%s: no parent clock\n", __func__);
- return;
- }
-
- for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++)
- clk_timer_scaler[clk].parent = clk_timers;
-
- s3c_register_clocks(clk_timer_scaler, ARRAY_SIZE(clk_timer_scaler));
- s3c_register_clocks(clk_timer_tclk, ARRAY_SIZE(clk_timer_tclk));
-
- for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) {
- ret = clk_pwm_tdiv_register(clk);
-
- if (ret < 0) {
- printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk);
- return;
- }
- }
-
- for (clk = 0; clk < ARRAY_SIZE(clk_tin); clk++) {
- ret = clk_pwm_tin_register(&clk_tin[clk]);
- if (ret < 0) {
- printk(KERN_ERR "error adding pwm%d tin clock\n", clk);
- return;
- }
- }
-}
diff --git a/arch/arm/plat-samsung/s5p-irq.c b/arch/arm/plat-samsung/s5p-irq.c
index ff1a760..ddfaca9 100644
--- a/arch/arm/plat-samsung/s5p-irq.c
+++ b/arch/arm/plat-samsung/s5p-irq.c
@@ -17,9 +17,7 @@
#include <mach/irqs.h>
#include <mach/map.h>
-#include <plat/regs-timer.h>
#include <plat/cpu.h>
-#include <plat/irq-vic-timer.h>
void __init s5p_init_irq(u32 *vic, u32 num_vic)
{
@@ -30,6 +28,4 @@
for (irq = 0; irq < num_vic; irq++)
vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
#endif
-
- s3c_init_vic_timer_irq(5, IRQ_TIMER0);
}
diff --git a/arch/arm/plat-samsung/samsung-time.c b/arch/arm/plat-samsung/samsung-time.c
deleted file mode 100644
index 2957075..0000000
--- a/arch/arm/plat-samsung/samsung-time.c
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * samsung - Common hr-timer support (s3c and s5p)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/platform_device.h>
-#include <linux/sched_clock.h>
-
-#include <asm/smp_twd.h>
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/map.h>
-#include <plat/devs.h>
-#include <plat/regs-timer.h>
-#include <plat/samsung-time.h>
-
-static struct clk *tin_event;
-static struct clk *tin_source;
-static struct clk *tdiv_event;
-static struct clk *tdiv_source;
-static struct clk *timerclk;
-static struct samsung_timer_source timer_source;
-static unsigned long clock_count_per_tick;
-static void samsung_timer_resume(void);
-
-static void samsung_time_stop(enum samsung_timer_mode mode)
-{
- unsigned long tcon;
-
- tcon = __raw_readl(S3C2410_TCON);
-
- switch (mode) {
- case SAMSUNG_PWM0:
- tcon &= ~S3C2410_TCON_T0START;
- break;
-
- case SAMSUNG_PWM1:
- tcon &= ~S3C2410_TCON_T1START;
- break;
-
- case SAMSUNG_PWM2:
- tcon &= ~S3C2410_TCON_T2START;
- break;
-
- case SAMSUNG_PWM3:
- tcon &= ~S3C2410_TCON_T3START;
- break;
-
- case SAMSUNG_PWM4:
- tcon &= ~S3C2410_TCON_T4START;
- break;
-
- default:
- printk(KERN_ERR "Invalid Timer %d\n", mode);
- break;
- }
- __raw_writel(tcon, S3C2410_TCON);
-}
-
-static void samsung_time_setup(enum samsung_timer_mode mode, unsigned long tcnt)
-{
- unsigned long tcon;
-
- tcon = __raw_readl(S3C2410_TCON);
-
- tcnt--;
-
- switch (mode) {
- case SAMSUNG_PWM0:
- tcon &= ~(0x0f << 0);
- tcon |= S3C2410_TCON_T0MANUALUPD;
- break;
-
- case SAMSUNG_PWM1:
- tcon &= ~(0x0f << 8);
- tcon |= S3C2410_TCON_T1MANUALUPD;
- break;
-
- case SAMSUNG_PWM2:
- tcon &= ~(0x0f << 12);
- tcon |= S3C2410_TCON_T2MANUALUPD;
- break;
-
- case SAMSUNG_PWM3:
- tcon &= ~(0x0f << 16);
- tcon |= S3C2410_TCON_T3MANUALUPD;
- break;
-
- case SAMSUNG_PWM4:
- tcon &= ~(0x07 << 20);
- tcon |= S3C2410_TCON_T4MANUALUPD;
- break;
-
- default:
- printk(KERN_ERR "Invalid Timer %d\n", mode);
- break;
- }
-
- __raw_writel(tcnt, S3C2410_TCNTB(mode));
- __raw_writel(tcnt, S3C2410_TCMPB(mode));
- __raw_writel(tcon, S3C2410_TCON);
-}
-
-static void samsung_time_start(enum samsung_timer_mode mode, bool periodic)
-{
- unsigned long tcon;
-
- tcon = __raw_readl(S3C2410_TCON);
-
- switch (mode) {
- case SAMSUNG_PWM0:
- tcon |= S3C2410_TCON_T0START;
- tcon &= ~S3C2410_TCON_T0MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T0RELOAD;
- else
- tcon &= ~S3C2410_TCON_T0RELOAD;
- break;
-
- case SAMSUNG_PWM1:
- tcon |= S3C2410_TCON_T1START;
- tcon &= ~S3C2410_TCON_T1MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T1RELOAD;
- else
- tcon &= ~S3C2410_TCON_T1RELOAD;
- break;
-
- case SAMSUNG_PWM2:
- tcon |= S3C2410_TCON_T2START;
- tcon &= ~S3C2410_TCON_T2MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T2RELOAD;
- else
- tcon &= ~S3C2410_TCON_T2RELOAD;
- break;
-
- case SAMSUNG_PWM3:
- tcon |= S3C2410_TCON_T3START;
- tcon &= ~S3C2410_TCON_T3MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T3RELOAD;
- else
- tcon &= ~S3C2410_TCON_T3RELOAD;
- break;
-
- case SAMSUNG_PWM4:
- tcon |= S3C2410_TCON_T4START;
- tcon &= ~S3C2410_TCON_T4MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T4RELOAD;
- else
- tcon &= ~S3C2410_TCON_T4RELOAD;
- break;
-
- default:
- printk(KERN_ERR "Invalid Timer %d\n", mode);
- break;
- }
- __raw_writel(tcon, S3C2410_TCON);
-}
-
-static int samsung_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-{
- samsung_time_setup(timer_source.event_id, cycles);
- samsung_time_start(timer_source.event_id, NON_PERIODIC);
-
- return 0;
-}
-
-static void samsung_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- samsung_time_stop(timer_source.event_id);
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- samsung_time_setup(timer_source.event_id, clock_count_per_tick);
- samsung_time_start(timer_source.event_id, PERIODIC);
- break;
-
- case CLOCK_EVT_MODE_ONESHOT:
- break;
-
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- break;
-
- case CLOCK_EVT_MODE_RESUME:
- samsung_timer_resume();
- break;
- }
-}
-
-static void samsung_timer_resume(void)
-{
- /* event timer restart */
- samsung_time_setup(timer_source.event_id, clock_count_per_tick);
- samsung_time_start(timer_source.event_id, PERIODIC);
-
- /* source timer restart */
- samsung_time_setup(timer_source.source_id, TCNT_MAX);
- samsung_time_start(timer_source.source_id, PERIODIC);
-}
-
-void __init samsung_set_timer_source(enum samsung_timer_mode event,
- enum samsung_timer_mode source)
-{
- s3c_device_timer[event].dev.bus = &platform_bus_type;
- s3c_device_timer[source].dev.bus = &platform_bus_type;
-
- timer_source.event_id = event;
- timer_source.source_id = source;
-}
-
-static struct clock_event_device time_event_device = {
- .name = "samsung_event_timer",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .rating = 200,
- .set_next_event = samsung_set_next_event,
- .set_mode = samsung_set_mode,
-};
-
-static irqreturn_t samsung_clock_event_isr(int irq, void *dev_id)
-{
- struct clock_event_device *evt = dev_id;
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction samsung_clock_event_irq = {
- .name = "samsung_time_irq",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = samsung_clock_event_isr,
- .dev_id = &time_event_device,
-};
-
-static void __init samsung_clockevent_init(void)
-{
- unsigned long pclk;
- unsigned long clock_rate;
- unsigned int irq_number;
- struct clk *tscaler;
-
- pclk = clk_get_rate(timerclk);
-
- tscaler = clk_get_parent(tdiv_event);
-
- clk_set_rate(tscaler, pclk / TSCALER_DIV);
- clk_set_rate(tdiv_event, pclk / TDIV);
- clk_set_parent(tin_event, tdiv_event);
-
- clock_rate = clk_get_rate(tin_event);
- clock_count_per_tick = clock_rate / HZ;
-
- time_event_device.cpumask = cpumask_of(0);
- clockevents_config_and_register(&time_event_device, clock_rate, 1, -1);
-
- irq_number = timer_source.event_id + IRQ_TIMER0;
- setup_irq(irq_number, &samsung_clock_event_irq);
-}
-
-static void __iomem *samsung_timer_reg(void)
-{
- unsigned long offset = 0;
-
- switch (timer_source.source_id) {
- case SAMSUNG_PWM0:
- case SAMSUNG_PWM1:
- case SAMSUNG_PWM2:
- case SAMSUNG_PWM3:
- offset = (timer_source.source_id * 0x0c) + 0x14;
- break;
-
- case SAMSUNG_PWM4:
- offset = 0x40;
- break;
-
- default:
- printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id);
- return NULL;
- }
-
- return S3C_TIMERREG(offset);
-}
-
-/*
- * Override the global weak sched_clock symbol with this
- * local implementation which uses the clocksource to get some
- * better resolution when scheduling the kernel. We accept that
- * this wraps around for now, since it is just a relative time
- * stamp. (Inspired by U300 implementation.)
- */
-static u32 notrace samsung_read_sched_clock(void)
-{
- void __iomem *reg = samsung_timer_reg();
-
- if (!reg)
- return 0;
-
- return ~__raw_readl(reg);
-}
-
-static void __init samsung_clocksource_init(void)
-{
- unsigned long pclk;
- unsigned long clock_rate;
-
- pclk = clk_get_rate(timerclk);
-
- clk_set_rate(tdiv_source, pclk / TDIV);
- clk_set_parent(tin_source, tdiv_source);
-
- clock_rate = clk_get_rate(tin_source);
-
- samsung_time_setup(timer_source.source_id, TCNT_MAX);
- samsung_time_start(timer_source.source_id, PERIODIC);
-
- setup_sched_clock(samsung_read_sched_clock, TSIZE, clock_rate);
-
- if (clocksource_mmio_init(samsung_timer_reg(), "samsung_clocksource_timer",
- clock_rate, 250, TSIZE, clocksource_mmio_readl_down))
- panic("samsung_clocksource_timer: can't register clocksource\n");
-}
-
-static void __init samsung_timer_resources(void)
-{
-
- unsigned long event_id = timer_source.event_id;
- unsigned long source_id = timer_source.source_id;
- char devname[15];
-
- timerclk = clk_get(NULL, "timers");
- if (IS_ERR(timerclk))
- panic("failed to get timers clock for timer");
-
- clk_enable(timerclk);
-
- sprintf(devname, "s3c24xx-pwm.%lu", event_id);
- s3c_device_timer[event_id].id = event_id;
- s3c_device_timer[event_id].dev.init_name = devname;
-
- tin_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tin");
- if (IS_ERR(tin_event))
- panic("failed to get pwm-tin clock for event timer");
-
- tdiv_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tdiv");
- if (IS_ERR(tdiv_event))
- panic("failed to get pwm-tdiv clock for event timer");
-
- clk_enable(tin_event);
-
- sprintf(devname, "s3c24xx-pwm.%lu", source_id);
- s3c_device_timer[source_id].id = source_id;
- s3c_device_timer[source_id].dev.init_name = devname;
-
- tin_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tin");
- if (IS_ERR(tin_source))
- panic("failed to get pwm-tin clock for source timer");
-
- tdiv_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tdiv");
- if (IS_ERR(tdiv_source))
- panic("failed to get pwm-tdiv clock for source timer");
-
- clk_enable(tin_source);
-}
-
-void __init samsung_timer_init(void)
-{
- samsung_timer_resources();
- samsung_clockevent_init();
- samsung_clocksource_init();
-}
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index f71c37e..c9770ba 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -172,7 +172,7 @@
enable_percpu_irq(xen_events_irq, 0);
}
-static void xen_restart(char str, const char *cmd)
+static void xen_restart(enum reboot_mode reboot_mode, const char *cmd)
{
struct sched_shutdown r = { .reason = SHUTDOWN_reboot };
int rc;