V4L/DVB (11115): cafe_ccic: use v4l2_subdev to talk to the ov7670 sensor.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index 600dde3..3363e50 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -148,7 +148,8 @@
struct pci_dev *pdev;
struct video_device vdev;
struct i2c_adapter i2c_adapter;
- struct i2c_client *sensor;
+ struct v4l2_subdev *sensor;
+ unsigned short sensor_addr;
unsigned char __iomem *regs;
struct list_head dev_list; /* link to other devices */
@@ -196,6 +197,8 @@
#define CF_DMA_ACTIVE 3 /* A frame is incoming */
#define CF_CONFIG_NEEDED 4 /* Must configure hardware */
+#define sensor_call(cam, o, f, args...) \
+ v4l2_subdev_call(cam->sensor, o, f, ##args)
static inline struct cafe_camera *to_cam(struct v4l2_device *dev)
{
@@ -440,14 +443,6 @@
int ret = -EINVAL;
/*
- * Refuse to talk to anything but OV cam chips. We should
- * never even see an attempt to do so, but one never knows.
- */
- if (cam->sensor && addr != cam->sensor->addr) {
- cam_err(cam, "funky smbus addr %d\n", addr);
- return -EINVAL;
- }
- /*
* This interface would appear to only do byte data ops. OK
* it can do word too, but the cam chip has no use for that.
*/
@@ -485,40 +480,9 @@
};
/* Somebody is on the bus */
-static int cafe_cam_init(struct cafe_camera *cam);
static void cafe_ctlr_stop_dma(struct cafe_camera *cam);
static void cafe_ctlr_power_down(struct cafe_camera *cam);
-static int cafe_smbus_attach(struct i2c_client *client)
-{
- struct v4l2_device *v4l2_dev = i2c_get_adapdata(client->adapter);
- struct cafe_camera *cam = to_cam(v4l2_dev);
-
- /*
- * Don't talk to chips we don't recognize.
- */
- if (client->driver->id == I2C_DRIVERID_OV7670) {
- cam->sensor = client;
- return cafe_cam_init(cam);
- }
- return -EINVAL;
-}
-
-static int cafe_smbus_detach(struct i2c_client *client)
-{
- struct v4l2_device *v4l2_dev = i2c_get_adapdata(client->adapter);
- struct cafe_camera *cam = to_cam(v4l2_dev);
-
- if (cam->sensor == client) {
- cafe_ctlr_stop_dma(cam);
- cafe_ctlr_power_down(cam);
- cam_err(cam, "lost the sensor!\n");
- cam->sensor = NULL; /* Bummer, no camera */
- cam->state = S_NOTREADY;
- }
- return 0;
-}
-
static int cafe_smbus_setup(struct cafe_camera *cam)
{
struct i2c_adapter *adap = &cam->i2c_adapter;
@@ -527,8 +491,6 @@
cafe_smbus_enable_irq(cam);
adap->id = I2C_HW_SMBUS_CAFE;
adap->owner = THIS_MODULE;
- adap->client_register = cafe_smbus_attach;
- adap->client_unregister = cafe_smbus_detach;
adap->algo = &cafe_smbus_algo;
strcpy(adap->name, "cafe_ccic");
adap->dev.parent = &cam->pdev->dev;
@@ -790,23 +752,9 @@
* Communications with the sensor.
*/
-static int __cafe_cam_cmd(struct cafe_camera *cam, int cmd, void *arg)
-{
- struct i2c_client *sc = cam->sensor;
- int ret;
-
- if (sc == NULL || sc->driver == NULL || sc->driver->command == NULL)
- return -EINVAL;
- ret = sc->driver->command(sc, cmd, arg);
- if (ret == -EPERM) /* Unsupported command */
- return 0;
- return ret;
-}
-
static int __cafe_cam_reset(struct cafe_camera *cam)
{
- int zero = 0;
- return __cafe_cam_cmd(cam, VIDIOC_INT_RESET, &zero);
+ return sensor_call(cam, core, reset, 0);
}
/*
@@ -826,14 +774,13 @@
if (ret)
goto out;
chip.match.type = V4L2_CHIP_MATCH_I2C_ADDR;
- chip.match.addr = cam->sensor->addr;
- ret = __cafe_cam_cmd(cam, VIDIOC_DBG_G_CHIP_IDENT, &chip);
+ chip.match.addr = cam->sensor_addr;
+ ret = sensor_call(cam, core, g_chip_ident, &chip);
if (ret)
goto out;
cam->sensor_type = chip.ident;
-/* if (cam->sensor->addr != OV7xx0_SID) { */
if (cam->sensor_type != V4L2_IDENT_OV7670) {
- cam_err(cam, "Unsupported sensor type %d", cam->sensor->addr);
+ cam_err(cam, "Unsupported sensor type 0x%x", cam->sensor_type);
ret = -EINVAL;
goto out;
}
@@ -857,21 +804,21 @@
memset(&ctrl, 0, sizeof(ctrl));
ctrl.id = V4L2_CID_VFLIP;
ctrl.value = flip;
- return __cafe_cam_cmd(cam, VIDIOC_S_CTRL, &ctrl);
+ return sensor_call(cam, core, s_ctrl, &ctrl);
}
static int cafe_cam_configure(struct cafe_camera *cam)
{
struct v4l2_format fmt;
- int ret, zero = 0;
+ int ret;
if (cam->state != S_IDLE)
return -EINVAL;
fmt.fmt.pix = cam->pix_format;
- ret = __cafe_cam_cmd(cam, VIDIOC_INT_INIT, &zero);
+ ret = sensor_call(cam, core, init, 0);
if (ret == 0)
- ret = __cafe_cam_cmd(cam, VIDIOC_S_FMT, &fmt);
+ ret = sensor_call(cam, video, s_fmt, &fmt);
/*
* OV7670 does weird things if flip is set *before* format...
*/
@@ -1490,7 +1437,7 @@
int ret;
mutex_lock(&cam->s_mutex);
- ret = __cafe_cam_cmd(cam, VIDIOC_QUERYCTRL, qc);
+ ret = sensor_call(cam, core, queryctrl, qc);
mutex_unlock(&cam->s_mutex);
return ret;
}
@@ -1503,7 +1450,7 @@
int ret;
mutex_lock(&cam->s_mutex);
- ret = __cafe_cam_cmd(cam, VIDIOC_G_CTRL, ctrl);
+ ret = sensor_call(cam, core, g_ctrl, ctrl);
mutex_unlock(&cam->s_mutex);
return ret;
}
@@ -1516,7 +1463,7 @@
int ret;
mutex_lock(&cam->s_mutex);
- ret = __cafe_cam_cmd(cam, VIDIOC_S_CTRL, ctrl);
+ ret = sensor_call(cam, core, s_ctrl, ctrl);
mutex_unlock(&cam->s_mutex);
return ret;
}
@@ -1558,7 +1505,7 @@
if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
mutex_lock(&cam->s_mutex);
- ret = __cafe_cam_cmd(cam, VIDIOC_ENUM_FMT, fmt);
+ ret = sensor_call(cam, video, enum_fmt, fmt);
mutex_unlock(&cam->s_mutex);
return ret;
}
@@ -1571,7 +1518,7 @@
int ret;
mutex_lock(&cam->s_mutex);
- ret = __cafe_cam_cmd(cam, VIDIOC_TRY_FMT, fmt);
+ ret = sensor_call(cam, video, try_fmt, fmt);
mutex_unlock(&cam->s_mutex);
return ret;
}
@@ -1680,7 +1627,7 @@
int ret;
mutex_lock(&cam->s_mutex);
- ret = __cafe_cam_cmd(cam, VIDIOC_G_PARM, parms);
+ ret = sensor_call(cam, video, g_parm, parms);
mutex_unlock(&cam->s_mutex);
parms->parm.capture.readbuffers = n_dma_bufs;
return ret;
@@ -1693,7 +1640,7 @@
int ret;
mutex_lock(&cam->s_mutex);
- ret = __cafe_cam_cmd(cam, VIDIOC_S_PARM, parms);
+ ret = sensor_call(cam, video, s_parm, parms);
mutex_unlock(&cam->s_mutex);
parms->parm.capture.readbuffers = n_dma_bufs;
return ret;
@@ -1973,7 +1920,7 @@
{
u8 v;
- cafe_smbus_read_data(cam, cam->sensor->addr, offset, &v);
+ cafe_smbus_read_data(cam, cam->sensor_addr, offset, &v);
s += sprintf(s, "%02x: %02x\n", offset, v);
}
return simple_read_from_buffer(buf, count, ppos, cafe_debug_buf,
@@ -2089,6 +2036,18 @@
ret = cafe_smbus_setup(cam);
if (ret)
goto out_freeirq;
+
+ cam->sensor_addr = 0x42;
+ cam->sensor = v4l2_i2c_new_subdev(&cam->i2c_adapter,
+ "ov7670", "ov7670", cam->sensor_addr);
+ if (cam->sensor == NULL) {
+ ret = -ENODEV;
+ goto out_smbus;
+ }
+ ret = cafe_cam_init(cam);
+ if (ret)
+ goto out_smbus;
+
/*
* Get the v4l2 setup done.
*/
@@ -2263,7 +2222,6 @@
printk(KERN_ERR "Unable to register cafe_ccic driver\n");
goto out;
}
- request_module("ov7670"); /* FIXME want something more general */
ret = 0;
out: