| /* linux/arch/arm/plat-s3c64xx/include/mach/irqs.h |
| * |
| * Copyright 2008 Openmoko, Inc. |
| * Copyright 2008 Simtec Electronics |
| * Ben Dooks <ben@simtec.co.uk> |
| * http://armlinux.simtec.co.uk/ |
| * |
| * S3C64XX - Common IRQ support |
| */ |
| |
| #ifndef __ASM_PLAT_S3C64XX_IRQS_H |
| #define __ASM_PLAT_S3C64XX_IRQS_H __FILE__ |
| |
| /* we keep the first set of CPU IRQs out of the range of |
| * the ISA space, so that the PC104 has them to itself |
| * and we don't end up having to do horrible things to the |
| * standard ISA drivers.... |
| * |
| * note, since we're using the VICs, our start must be a |
| * mulitple of 32 to allow the common code to work |
| */ |
| |
| #define S3C_IRQ_OFFSET (32) |
| |
| #define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET) |
| |
| #define S3C_VIC0_BASE S3C_IRQ(0) |
| #define S3C_VIC1_BASE S3C_IRQ(32) |
| |
| /* UART interrupts, each UART has 4 intterupts per channel so |
| * use the space between the ISA and S3C main interrupts. Note, these |
| * are not in the same order as the S3C24XX series! */ |
| |
| #define IRQ_S3CUART_BASE0 (16) |
| #define IRQ_S3CUART_BASE1 (20) |
| #define IRQ_S3CUART_BASE2 (24) |
| #define IRQ_S3CUART_BASE3 (28) |
| |
| #define UART_IRQ_RXD (0) |
| #define UART_IRQ_ERR (1) |
| #define UART_IRQ_TXD (2) |
| #define UART_IRQ_MODEM (3) |
| |
| #define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD) |
| #define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD) |
| #define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR) |
| |
| #define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD) |
| #define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD) |
| #define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR) |
| |
| #define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD) |
| #define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD) |
| #define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR) |
| |
| #define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD) |
| #define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD) |
| #define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR) |
| |
| /* VIC based IRQs */ |
| |
| #define S3C64XX_IRQ_VIC0(x) (S3C_VIC0_BASE + (x)) |
| #define S3C64XX_IRQ_VIC1(x) (S3C_VIC1_BASE + (x)) |
| |
| /* VIC0 */ |
| |
| #define IRQ_EINT0_3 S3C64XX_IRQ_VIC0(0) |
| #define IRQ_EINT4_11 S3C64XX_IRQ_VIC0(1) |
| #define IRQ_RTC_TIC S3C64XX_IRQ_VIC0(2) |
| #define IRQ_CAMIF_C S3C64XX_IRQ_VIC0(3) |
| #define IRQ_CAMIF_P S3C64XX_IRQ_VIC0(4) |
| #define IRQ_CAMIF_MC S3C64XX_IRQ_VIC0(5) |
| #define IRQ_S3C6410_IIC1 S3C64XX_IRQ_VIC0(5) |
| #define IRQ_S3C6410_IIS S3C64XX_IRQ_VIC0(6) |
| #define IRQ_S3C6400_CAMIF_MP S3C64XX_IRQ_VIC0(6) |
| #define IRQ_CAMIF_WE_C S3C64XX_IRQ_VIC0(7) |
| #define IRQ_S3C6410_G3D S3C64XX_IRQ_VIC0(8) |
| #define IRQ_S3C6400_CAMIF_WE_P S3C64XX_IRQ_VIC0(8) |
| #define IRQ_POST0 S3C64XX_IRQ_VIC0(9) |
| #define IRQ_ROTATOR S3C64XX_IRQ_VIC0(10) |
| #define IRQ_2D S3C64XX_IRQ_VIC0(11) |
| #define IRQ_TVENC S3C64XX_IRQ_VIC0(12) |
| #define IRQ_SCALER S3C64XX_IRQ_VIC0(13) |
| #define IRQ_BATF S3C64XX_IRQ_VIC0(14) |
| #define IRQ_JPEG S3C64XX_IRQ_VIC0(15) |
| #define IRQ_MFC S3C64XX_IRQ_VIC0(16) |
| #define IRQ_SDMA0 S3C64XX_IRQ_VIC0(17) |
| #define IRQ_SDMA1 S3C64XX_IRQ_VIC0(18) |
| #define IRQ_ARM_DMAERR S3C64XX_IRQ_VIC0(19) |
| #define IRQ_ARM_DMA S3C64XX_IRQ_VIC0(20) |
| #define IRQ_ARM_DMAS S3C64XX_IRQ_VIC0(21) |
| #define IRQ_KEYPAD S3C64XX_IRQ_VIC0(22) |
| #define IRQ_TIMER0_VIC S3C64XX_IRQ_VIC0(23) |
| #define IRQ_TIMER1_VIC S3C64XX_IRQ_VIC0(24) |
| #define IRQ_TIMER2_VIC S3C64XX_IRQ_VIC0(25) |
| #define IRQ_WDT S3C64XX_IRQ_VIC0(26) |
| #define IRQ_TIMER3_VIC S3C64XX_IRQ_VIC0(27) |
| #define IRQ_TIMER4_VIC S3C64XX_IRQ_VIC0(28) |
| #define IRQ_LCD_FIFO S3C64XX_IRQ_VIC0(29) |
| #define IRQ_LCD_VSYNC S3C64XX_IRQ_VIC0(30) |
| #define IRQ_LCD_SYSTEM S3C64XX_IRQ_VIC0(31) |
| |
| /* VIC1 */ |
| |
| #define IRQ_EINT12_19 S3C64XX_IRQ_VIC1(0) |
| #define IRQ_EINT20_27 S3C64XX_IRQ_VIC1(1) |
| #define IRQ_PCM0 S3C64XX_IRQ_VIC1(2) |
| #define IRQ_PCM1 S3C64XX_IRQ_VIC1(3) |
| #define IRQ_AC97 S3C64XX_IRQ_VIC1(4) |
| #define IRQ_UART0 S3C64XX_IRQ_VIC1(5) |
| #define IRQ_UART1 S3C64XX_IRQ_VIC1(6) |
| #define IRQ_UART2 S3C64XX_IRQ_VIC1(7) |
| #define IRQ_UART3 S3C64XX_IRQ_VIC1(8) |
| #define IRQ_DMA0 S3C64XX_IRQ_VIC1(9) |
| #define IRQ_DMA1 S3C64XX_IRQ_VIC1(10) |
| #define IRQ_ONENAND0 S3C64XX_IRQ_VIC1(11) |
| #define IRQ_ONENAND1 S3C64XX_IRQ_VIC1(12) |
| #define IRQ_NFC S3C64XX_IRQ_VIC1(13) |
| #define IRQ_CFCON S3C64XX_IRQ_VIC1(14) |
| #define IRQ_UHOST S3C64XX_IRQ_VIC1(15) |
| #define IRQ_SPI0 S3C64XX_IRQ_VIC1(16) |
| #define IRQ_SPI1 S3C64XX_IRQ_VIC1(17) |
| #define IRQ_IIC S3C64XX_IRQ_VIC1(18) |
| #define IRQ_HSItx S3C64XX_IRQ_VIC1(19) |
| #define IRQ_HSIrx S3C64XX_IRQ_VIC1(20) |
| #define IRQ_RESERVED S3C64XX_IRQ_VIC1(21) |
| #define IRQ_MSM S3C64XX_IRQ_VIC1(22) |
| #define IRQ_HOSTIF S3C64XX_IRQ_VIC1(23) |
| #define IRQ_HSMMC0 S3C64XX_IRQ_VIC1(24) |
| #define IRQ_HSMMC1 S3C64XX_IRQ_VIC1(25) |
| #define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */ |
| #define IRQ_OTG S3C64XX_IRQ_VIC1(26) |
| #define IRQ_IRDA S3C64XX_IRQ_VIC1(27) |
| #define IRQ_RTC_ALARM S3C64XX_IRQ_VIC1(28) |
| #define IRQ_SEC S3C64XX_IRQ_VIC1(29) |
| #define IRQ_PENDN S3C64XX_IRQ_VIC1(30) |
| #define IRQ_TC IRQ_PENDN |
| #define IRQ_ADC S3C64XX_IRQ_VIC1(31) |
| |
| #define S3C64XX_TIMER_IRQ(x) S3C_IRQ(64 + (x)) |
| |
| #define IRQ_TIMER0 S3C64XX_TIMER_IRQ(0) |
| #define IRQ_TIMER1 S3C64XX_TIMER_IRQ(1) |
| #define IRQ_TIMER2 S3C64XX_TIMER_IRQ(2) |
| #define IRQ_TIMER3 S3C64XX_TIMER_IRQ(3) |
| #define IRQ_TIMER4 S3C64XX_TIMER_IRQ(4) |
| |
| /* compatibility for device defines */ |
| |
| #define IRQ_IIC1 IRQ_S3C6410_IIC1 |
| |
| /* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series |
| * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE |
| * which we place after the pair of VICs. */ |
| |
| #define S3C_IRQ_EINT_BASE S3C_IRQ(64+5) |
| |
| #define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE) |
| #define IRQ_EINT(x) S3C_EINT(x) |
| |
| /* Next the external interrupt groups. These are similar to the IRQ_EINT(x) |
| * that they are sourced from the GPIO pins but with a different scheme for |
| * priority and source indication. |
| * |
| * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO |
| * interrupts, but for historical reasons they are kept apart from these |
| * next interrupts. |
| * |
| * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the |
| * machine specific support files. |
| */ |
| |
| #define IRQ_EINT_GROUP1_NR (15) |
| #define IRQ_EINT_GROUP2_NR (8) |
| #define IRQ_EINT_GROUP3_NR (5) |
| #define IRQ_EINT_GROUP4_NR (14) |
| #define IRQ_EINT_GROUP5_NR (7) |
| #define IRQ_EINT_GROUP6_NR (10) |
| #define IRQ_EINT_GROUP7_NR (16) |
| #define IRQ_EINT_GROUP8_NR (15) |
| #define IRQ_EINT_GROUP9_NR (9) |
| |
| #define IRQ_EINT_GROUP_BASE S3C_EINT(28) |
| #define IRQ_EINT_GROUP1_BASE (IRQ_EINT_GROUP_BASE + 0x00) |
| #define IRQ_EINT_GROUP2_BASE (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR) |
| #define IRQ_EINT_GROUP3_BASE (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR) |
| #define IRQ_EINT_GROUP4_BASE (IRQ_EINT_GROUP3_BASE + IRQ_EINT_GROUP3_NR) |
| #define IRQ_EINT_GROUP5_BASE (IRQ_EINT_GROUP4_BASE + IRQ_EINT_GROUP4_NR) |
| #define IRQ_EINT_GROUP6_BASE (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR) |
| #define IRQ_EINT_GROUP7_BASE (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR) |
| #define IRQ_EINT_GROUP8_BASE (IRQ_EINT_GROUP7_BASE + IRQ_EINT_GROUP7_NR) |
| #define IRQ_EINT_GROUP9_BASE (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR) |
| |
| #define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no)) |
| |
| /* Set the default NR_IRQS */ |
| |
| #define NR_IRQS (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1) |
| |
| #endif /* __ASM_PLAT_S3C64XX_IRQS_H */ |
| |