| /* |
| * ricoh_mmc.c - Dummy driver to disable the Rioch MMC controller. |
| * |
| * Copyright (C) 2007 Philip Langdale, All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| */ |
| |
| /* |
| * This is a conceptually ridiculous driver, but it is required by the way |
| * the Ricoh multi-function chips (R5CXXX) work. These chips implement |
| * the four main memory card controllers (SD, MMC, MS, xD) and one or both |
| * of cardbus or firewire. It happens that they implement SD and MMC |
| * support as separate controllers (and PCI functions). The linux SDHCI |
| * driver supports MMC cards but the chip detects MMC cards in hardware |
| * and directs them to the MMC controller - so the SDHCI driver never sees |
| * them. To get around this, we must disable the useless MMC controller. |
| * At that point, the SDHCI controller will start seeing them. As a bonus, |
| * a detection event occurs immediately, even if the MMC card is already |
| * in the reader. |
| * |
| * It seems to be the case that the relevant PCI registers to deactivate the |
| * MMC controller live on PCI function 0, which might be the cardbus controller |
| * or the firewire controller, depending on the particular chip in question. As |
| * such, it makes what this driver has to do unavoidably ugly. Such is life. |
| */ |
| |
| #include <linux/pci.h> |
| |
| #define DRIVER_NAME "ricoh-mmc" |
| |
| static const struct pci_device_id pci_ids[] __devinitdata = { |
| { |
| .vendor = PCI_VENDOR_ID_RICOH, |
| .device = PCI_DEVICE_ID_RICOH_R5C843, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| }, |
| { /* end: all zeroes */ }, |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, pci_ids); |
| |
| static int ricoh_mmc_disable(struct pci_dev *fw_dev) |
| { |
| u8 write_enable; |
| u8 write_target; |
| u8 disable; |
| |
| if (fw_dev->device == PCI_DEVICE_ID_RICOH_RL5C476) { |
| /* via RL5C476 */ |
| |
| pci_read_config_byte(fw_dev, 0xB7, &disable); |
| if (disable & 0x02) { |
| printk(KERN_INFO DRIVER_NAME |
| ": Controller already disabled. " \ |
| "Nothing to do.\n"); |
| return -ENODEV; |
| } |
| |
| pci_read_config_byte(fw_dev, 0x8E, &write_enable); |
| pci_write_config_byte(fw_dev, 0x8E, 0xAA); |
| pci_read_config_byte(fw_dev, 0x8D, &write_target); |
| pci_write_config_byte(fw_dev, 0x8D, 0xB7); |
| pci_write_config_byte(fw_dev, 0xB7, disable | 0x02); |
| pci_write_config_byte(fw_dev, 0x8E, write_enable); |
| pci_write_config_byte(fw_dev, 0x8D, write_target); |
| } else { |
| /* via R5C832 */ |
| |
| pci_read_config_byte(fw_dev, 0xCB, &disable); |
| if (disable & 0x02) { |
| printk(KERN_INFO DRIVER_NAME |
| ": Controller already disabled. " \ |
| "Nothing to do.\n"); |
| return -ENODEV; |
| } |
| |
| pci_read_config_byte(fw_dev, 0xCA, &write_enable); |
| pci_write_config_byte(fw_dev, 0xCA, 0x57); |
| pci_write_config_byte(fw_dev, 0xCB, disable | 0x02); |
| pci_write_config_byte(fw_dev, 0xCA, write_enable); |
| } |
| |
| printk(KERN_INFO DRIVER_NAME |
| ": Controller is now disabled.\n"); |
| |
| return 0; |
| } |
| |
| static int ricoh_mmc_enable(struct pci_dev *fw_dev) |
| { |
| u8 write_enable; |
| u8 write_target; |
| u8 disable; |
| |
| if (fw_dev->device == PCI_DEVICE_ID_RICOH_RL5C476) { |
| /* via RL5C476 */ |
| |
| pci_read_config_byte(fw_dev, 0x8E, &write_enable); |
| pci_write_config_byte(fw_dev, 0x8E, 0xAA); |
| pci_read_config_byte(fw_dev, 0x8D, &write_target); |
| pci_write_config_byte(fw_dev, 0x8D, 0xB7); |
| pci_read_config_byte(fw_dev, 0xB7, &disable); |
| pci_write_config_byte(fw_dev, 0xB7, disable & ~0x02); |
| pci_write_config_byte(fw_dev, 0x8E, write_enable); |
| pci_write_config_byte(fw_dev, 0x8D, write_target); |
| } else { |
| /* via R5C832 */ |
| |
| pci_read_config_byte(fw_dev, 0xCA, &write_enable); |
| pci_read_config_byte(fw_dev, 0xCB, &disable); |
| pci_write_config_byte(fw_dev, 0xCA, 0x57); |
| pci_write_config_byte(fw_dev, 0xCB, disable & ~0x02); |
| pci_write_config_byte(fw_dev, 0xCA, write_enable); |
| } |
| |
| printk(KERN_INFO DRIVER_NAME |
| ": Controller is now re-enabled.\n"); |
| |
| return 0; |
| } |
| |
| static int __devinit ricoh_mmc_probe(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| u8 rev; |
| u8 ctrlfound = 0; |
| |
| struct pci_dev *fw_dev = NULL; |
| |
| BUG_ON(pdev == NULL); |
| BUG_ON(ent == NULL); |
| |
| pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev); |
| |
| printk(KERN_INFO DRIVER_NAME |
| ": Ricoh MMC controller found at %s [%04x:%04x] (rev %x)\n", |
| pci_name(pdev), (int)pdev->vendor, (int)pdev->device, |
| (int)rev); |
| |
| while ((fw_dev = |
| pci_get_device(PCI_VENDOR_ID_RICOH, |
| PCI_DEVICE_ID_RICOH_RL5C476, fw_dev))) { |
| if (PCI_SLOT(pdev->devfn) == PCI_SLOT(fw_dev->devfn) && |
| PCI_FUNC(fw_dev->devfn) == 0 && |
| pdev->bus == fw_dev->bus) { |
| if (ricoh_mmc_disable(fw_dev) != 0) |
| return -ENODEV; |
| |
| pci_set_drvdata(pdev, fw_dev); |
| |
| ++ctrlfound; |
| break; |
| } |
| } |
| |
| fw_dev = NULL; |
| |
| while (!ctrlfound && |
| (fw_dev = pci_get_device(PCI_VENDOR_ID_RICOH, |
| PCI_DEVICE_ID_RICOH_R5C832, fw_dev))) { |
| if (PCI_SLOT(pdev->devfn) == PCI_SLOT(fw_dev->devfn) && |
| PCI_FUNC(fw_dev->devfn) == 0 && |
| pdev->bus == fw_dev->bus) { |
| if (ricoh_mmc_disable(fw_dev) != 0) |
| return -ENODEV; |
| |
| pci_set_drvdata(pdev, fw_dev); |
| |
| ++ctrlfound; |
| } |
| } |
| |
| if (!ctrlfound) { |
| printk(KERN_WARNING DRIVER_NAME |
| ": Main Ricoh function not found. Cannot disable controller.\n"); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static void __devexit ricoh_mmc_remove(struct pci_dev *pdev) |
| { |
| struct pci_dev *fw_dev = NULL; |
| |
| fw_dev = pci_get_drvdata(pdev); |
| BUG_ON(fw_dev == NULL); |
| |
| ricoh_mmc_enable(fw_dev); |
| |
| pci_set_drvdata(pdev, NULL); |
| } |
| |
| static int ricoh_mmc_suspend(struct pci_dev *pdev, pm_message_t state) |
| { |
| struct pci_dev *fw_dev = NULL; |
| |
| fw_dev = pci_get_drvdata(pdev); |
| BUG_ON(fw_dev == NULL); |
| |
| printk(KERN_INFO DRIVER_NAME ": Suspending.\n"); |
| |
| ricoh_mmc_enable(fw_dev); |
| |
| return 0; |
| } |
| |
| static int ricoh_mmc_resume(struct pci_dev *pdev) |
| { |
| struct pci_dev *fw_dev = NULL; |
| |
| fw_dev = pci_get_drvdata(pdev); |
| BUG_ON(fw_dev == NULL); |
| |
| printk(KERN_INFO DRIVER_NAME ": Resuming.\n"); |
| |
| ricoh_mmc_disable(fw_dev); |
| |
| return 0; |
| } |
| |
| static struct pci_driver ricoh_mmc_driver = { |
| .name = DRIVER_NAME, |
| .id_table = pci_ids, |
| .probe = ricoh_mmc_probe, |
| .remove = __devexit_p(ricoh_mmc_remove), |
| .suspend = ricoh_mmc_suspend, |
| .resume = ricoh_mmc_resume, |
| }; |
| |
| /*****************************************************************************\ |
| * * |
| * Driver init/exit * |
| * * |
| \*****************************************************************************/ |
| |
| static int __init ricoh_mmc_drv_init(void) |
| { |
| printk(KERN_INFO DRIVER_NAME |
| ": Ricoh MMC Controller disabling driver\n"); |
| printk(KERN_INFO DRIVER_NAME ": Copyright(c) Philip Langdale\n"); |
| |
| return pci_register_driver(&ricoh_mmc_driver); |
| } |
| |
| static void __exit ricoh_mmc_drv_exit(void) |
| { |
| pci_unregister_driver(&ricoh_mmc_driver); |
| } |
| |
| module_init(ricoh_mmc_drv_init); |
| module_exit(ricoh_mmc_drv_exit); |
| |
| MODULE_AUTHOR("Philip Langdale <philipl@alumni.utexas.net>"); |
| MODULE_DESCRIPTION("Ricoh MMC Controller disabling driver"); |
| MODULE_LICENSE("GPL"); |
| |