Merge commit 'v3.0-rc7' into devicetree/next
diff --git a/Documentation/devicetree/bindings/arm/primecell.txt b/Documentation/devicetree/bindings/arm/primecell.txt
new file mode 100644
index 0000000..1d5d7a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/primecell.txt
@@ -0,0 +1,21 @@
+* ARM Primecell Peripherals
+
+ARM, Ltd. Primecell peripherals have a standard id register that can be used to
+identify the peripheral type, vendor, and revision. This value can be used for
+driver matching.
+
+Required properties:
+
+- compatible : should be a specific value for peripheral and "arm,primecell"
+
+Optional properties:
+
+- arm,primecell-periphid : Value to override the h/w value with
+
+Example:
+
+serial@fff36000 {
+ compatible = "arm,pl011", "arm,primecell";
+ arm,primecell-periphid = <0x00341011>;
+};
+
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/sec.txt b/Documentation/devicetree/bindings/crypto/fsl-sec2.txt
similarity index 97%
rename from Documentation/devicetree/bindings/powerpc/fsl/sec.txt
rename to Documentation/devicetree/bindings/crypto/fsl-sec2.txt
index 2b6f2d4..38988ef 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/sec.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec2.txt
@@ -1,4 +1,4 @@
-Freescale SoC SEC Security Engines
+Freescale SoC SEC Security Engines versions 2.x-3.x
Required properties:
diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
new file mode 100644
index 0000000..b8b27b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
@@ -0,0 +1,36 @@
+* UART (Universal Asynchronous Receiver/Transmitter)
+
+Required properties:
+- compatible : one of:
+ - "ns8250"
+ - "ns16450"
+ - "ns16550a"
+ - "ns16550"
+ - "ns16750"
+ - "ns16850"
+ - "nvidia,tegra20-uart"
+ - "ibm,qpace-nwp-serial"
+ - "serial" if the port type is unknown.
+- reg : offset and length of the register set for the device.
+- interrupts : should contain uart interrupt.
+- clock-frequency : the input clock frequency for the UART.
+
+Optional properties:
+- current-speed : the current active speed of the UART.
+- reg-offset : offset to apply to the mapbase from the start of the registers.
+- reg-shift : quantity to shift the register offsets by.
+- reg-io-width : the size (in bytes) of the IO accesses that should be
+ performed on the device. There are some systems that require 32-bit
+ accesses to the UART (e.g. TI davinci).
+- used-by-rtas : set to indicate that the port is in use by the OpenFirmware
+ RTAS and should not be registered.
+
+Example:
+
+ uart@80230000 {
+ compatible = "ns8250";
+ reg = <0x80230000 0x100>;
+ clock-frequency = <3686400>;
+ interrupts = <10>;
+ reg-shift = <2>;
+ };
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 6c7fd7d..fb1975d 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -1155,12 +1155,19 @@
{
resource_size_t physaddr = 0;
int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */
- int id = dev->id;
+ u32 id = dev->id;
int irq = NO_IRQ;
int i;
dev_dbg(&dev->dev, "ace_probe(%p)\n", dev);
+ /* device id and bus width */
+ of_property_read_u32(dev->dev.of_node, "port-number", &id);
+ if (id < 0)
+ id = 0;
+ if (of_find_property(dev->dev.of_node, "8-bit", NULL))
+ bus_width = ACE_BUS_WIDTH_8;
+
for (i = 0; i < dev->num_resources; i++) {
if (dev->resource[i].flags & IORESOURCE_MEM)
physaddr = dev->resource[i].start;
@@ -1181,57 +1188,7 @@
return 0;
}
-static struct platform_driver ace_platform_driver = {
- .probe = ace_probe,
- .remove = __devexit_p(ace_remove),
- .driver = {
- .owner = THIS_MODULE,
- .name = "xsysace",
- },
-};
-
-/* ---------------------------------------------------------------------
- * OF_Platform Bus Support
- */
-
#if defined(CONFIG_OF)
-static int __devinit ace_of_probe(struct platform_device *op)
-{
- struct resource res;
- resource_size_t physaddr;
- const u32 *id;
- int irq, bus_width, rc;
-
- /* device id */
- id = of_get_property(op->dev.of_node, "port-number", NULL);
-
- /* physaddr */
- rc = of_address_to_resource(op->dev.of_node, 0, &res);
- if (rc) {
- dev_err(&op->dev, "invalid address\n");
- return rc;
- }
- physaddr = res.start;
-
- /* irq */
- irq = irq_of_parse_and_map(op->dev.of_node, 0);
-
- /* bus width */
- bus_width = ACE_BUS_WIDTH_16;
- if (of_find_property(op->dev.of_node, "8-bit", NULL))
- bus_width = ACE_BUS_WIDTH_8;
-
- /* Call the bus-independent setup code */
- return ace_alloc(&op->dev, id ? be32_to_cpup(id) : 0,
- physaddr, irq, bus_width);
-}
-
-static int __devexit ace_of_remove(struct platform_device *op)
-{
- ace_free(&op->dev);
- return 0;
-}
-
/* Match table for of_platform binding */
static const struct of_device_id ace_of_match[] __devinitconst = {
{ .compatible = "xlnx,opb-sysace-1.00.b", },
@@ -1241,34 +1198,20 @@
{},
};
MODULE_DEVICE_TABLE(of, ace_of_match);
+#else /* CONFIG_OF */
+#define ace_of_match NULL
+#endif /* CONFIG_OF */
-static struct platform_driver ace_of_driver = {
- .probe = ace_of_probe,
- .remove = __devexit_p(ace_of_remove),
+static struct platform_driver ace_platform_driver = {
+ .probe = ace_probe,
+ .remove = __devexit_p(ace_remove),
.driver = {
- .name = "xsysace",
.owner = THIS_MODULE,
+ .name = "xsysace",
.of_match_table = ace_of_match,
},
};
-/* Registration helpers to keep the number of #ifdefs to a minimum */
-static inline int __init ace_of_register(void)
-{
- pr_debug("xsysace: registering OF binding\n");
- return platform_driver_register(&ace_of_driver);
-}
-
-static inline void __exit ace_of_unregister(void)
-{
- platform_driver_unregister(&ace_of_driver);
-}
-#else /* CONFIG_OF */
-/* CONFIG_OF not enabled; do nothing helpers */
-static inline int __init ace_of_register(void) { return 0; }
-static inline void __exit ace_of_unregister(void) { }
-#endif /* CONFIG_OF */
-
/* ---------------------------------------------------------------------
* Module init/exit routines
*/
@@ -1282,11 +1225,6 @@
goto err_blk;
}
- rc = ace_of_register();
- if (rc)
- goto err_of;
-
- pr_debug("xsysace: registering platform binding\n");
rc = platform_driver_register(&ace_platform_driver);
if (rc)
goto err_plat;
@@ -1295,21 +1233,17 @@
return 0;
err_plat:
- ace_of_unregister();
-err_of:
unregister_blkdev(ace_major, "xsysace");
err_blk:
printk(KERN_ERR "xsysace: registration failed; err=%i\n", rc);
return rc;
}
+module_init(ace_init);
static void __exit ace_exit(void)
{
pr_debug("Unregistering Xilinx SystemACE driver\n");
platform_driver_unregister(&ace_platform_driver);
- ace_of_unregister();
unregister_blkdev(ace_major, "xsysace");
}
-
-module_init(ace_init);
module_exit(ace_exit);
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 632ebae..02ed367 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -596,6 +596,71 @@
EXPORT_SYMBOL(of_find_node_by_phandle);
/**
+ * of_property_read_u32_array - Find and read an array of 32 bit integers
+ * from a property.
+ *
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @out_value: pointer to return value, modified only if return value is 0.
+ *
+ * Search for a property in a device node and read 32-bit value(s) from
+ * it. Returns 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * The out_value is modified only if a valid u32 value can be decoded.
+ */
+int of_property_read_u32_array(const struct device_node *np, char *propname,
+ u32 *out_values, size_t sz)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+ const __be32 *val;
+
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if ((sz * sizeof(*out_values)) > prop->length)
+ return -EOVERFLOW;
+
+ val = prop->value;
+ while (sz--)
+ *out_values++ = be32_to_cpup(val++);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_property_read_u32_array);
+
+/**
+ * of_property_read_string - Find and read a string from a property
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @out_string: pointer to null terminated return string, modified only if
+ * return value is 0.
+ *
+ * Search for a property in a device tree node and retrieve a null
+ * terminated string value (pointer to data, not a copy). Returns 0 on
+ * success, -EINVAL if the property does not exist, -ENODATA if property
+ * does not have a value, and -EILSEQ if the string is not null-terminated
+ * within the length of the property data.
+ *
+ * The out_string pointer is modified only if a valid string can be decoded.
+ */
+int of_property_read_string(struct device_node *np, char *propname,
+ const char **out_string)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if (strnlen(prop->value, prop->length) >= prop->length)
+ return -EILSEQ;
+ *out_string = prop->value;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_property_read_string);
+
+/**
* of_parse_phandle - Resolve a phandle property to a device_node pointer
* @np: Pointer to device node holding phandle property
* @phandle_name: Name of property holding a phandle value
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 63d3cb7..e75af39 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -13,6 +13,7 @@
*/
#include <linux/errno.h>
#include <linux/module.h>
+#include <linux/amba/bus.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
@@ -22,6 +23,14 @@
#include <linux/of_platform.h>
#include <linux/platform_device.h>
+const struct of_device_id of_default_bus_match_table[] = {
+ { .compatible = "simple-bus", },
+#ifdef CONFIG_ARM_AMBA
+ { .compatible = "arm,amba-bus", },
+#endif /* CONFIG_ARM_AMBA */
+ {} /* Empty terminated list */
+};
+
static int of_dev_node_match(struct device *dev, void *data)
{
return dev->of_node == data;
@@ -168,17 +177,20 @@
EXPORT_SYMBOL(of_device_alloc);
/**
- * of_platform_device_create - Alloc, initialize and register an of_device
+ * of_platform_device_create_pdata - Alloc, initialize and register an of_device
* @np: pointer to node to create device for
* @bus_id: name to assign device
+ * @platform_data: pointer to populate platform_data pointer with
* @parent: Linux device model parent device.
*
* Returns pointer to created platform device, or NULL if a device was not
* registered. Unavailable devices will not get registered.
*/
-struct platform_device *of_platform_device_create(struct device_node *np,
- const char *bus_id,
- struct device *parent)
+struct platform_device *of_platform_device_create_pdata(
+ struct device_node *np,
+ const char *bus_id,
+ void *platform_data,
+ struct device *parent)
{
struct platform_device *dev;
@@ -194,6 +206,7 @@
#endif
dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
dev->dev.bus = &platform_bus_type;
+ dev->dev.platform_data = platform_data;
/* We do not fill the DMA ops for platform devices by default.
* This is currently the responsibility of the platform code
@@ -207,8 +220,111 @@
return dev;
}
+
+/**
+ * of_platform_device_create - Alloc, initialize and register an of_device
+ * @np: pointer to node to create device for
+ * @bus_id: name to assign device
+ * @parent: Linux device model parent device.
+ *
+ * Returns pointer to created platform device, or NULL if a device was not
+ * registered. Unavailable devices will not get registered.
+ */
+struct platform_device *of_platform_device_create(struct device_node *np,
+ const char *bus_id,
+ struct device *parent)
+{
+ return of_platform_device_create_pdata(np, bus_id, NULL, parent);
+}
EXPORT_SYMBOL(of_platform_device_create);
+#ifdef CONFIG_ARM_AMBA
+static struct amba_device *of_amba_device_create(struct device_node *node,
+ const char *bus_id,
+ void *platform_data,
+ struct device *parent)
+{
+ struct amba_device *dev;
+ const void *prop;
+ int i, ret;
+
+ pr_debug("Creating amba device %s\n", node->full_name);
+
+ if (!of_device_is_available(node))
+ return NULL;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return NULL;
+
+ /* setup generic device info */
+ dev->dev.coherent_dma_mask = ~0;
+ dev->dev.of_node = of_node_get(node);
+ dev->dev.parent = parent;
+ dev->dev.platform_data = platform_data;
+ if (bus_id)
+ dev_set_name(&dev->dev, "%s", bus_id);
+ else
+ of_device_make_bus_id(&dev->dev);
+
+ /* setup amba-specific device info */
+ dev->dma_mask = ~0;
+
+ /* Allow the HW Peripheral ID to be overridden */
+ prop = of_get_property(node, "arm,primecell-periphid", NULL);
+ if (prop)
+ dev->periphid = of_read_ulong(prop, 1);
+
+ /* Decode the IRQs and address ranges */
+ for (i = 0; i < AMBA_NR_IRQS; i++)
+ dev->irq[i] = irq_of_parse_and_map(node, i);
+
+ ret = of_address_to_resource(node, 0, &dev->res);
+ if (ret)
+ goto err_free;
+
+ ret = amba_device_register(dev, &iomem_resource);
+ if (ret)
+ goto err_free;
+
+ return dev;
+
+err_free:
+ kfree(dev);
+ return NULL;
+}
+#else /* CONFIG_ARM_AMBA */
+static struct amba_device *of_amba_device_create(struct device_node *node,
+ const char *bus_id,
+ void *platform_data,
+ struct device *parent)
+{
+ return NULL;
+}
+#endif /* CONFIG_ARM_AMBA */
+
+/**
+ * of_devname_lookup() - Given a device node, lookup the preferred Linux name
+ */
+static const struct of_dev_auxdata *of_dev_lookup(const struct of_dev_auxdata *lookup,
+ struct device_node *np)
+{
+ struct resource res;
+ if (lookup) {
+ for(; lookup->name != NULL; lookup++) {
+ if (!of_device_is_compatible(np, lookup->compatible))
+ continue;
+ if (of_address_to_resource(np, 0, &res))
+ continue;
+ if (res.start != lookup->phys_addr)
+ continue;
+ pr_debug("%s: devname=%s\n", np->full_name, lookup->name);
+ return lookup;
+ }
+ }
+ return NULL;
+}
+
/**
* of_platform_bus_create() - Create a device for a node and its children.
* @bus: device node of the bus to instantiate
@@ -221,19 +337,41 @@
*/
static int of_platform_bus_create(struct device_node *bus,
const struct of_device_id *matches,
- struct device *parent)
+ const struct of_dev_auxdata *lookup,
+ struct device *parent, bool strict)
{
+ const struct of_dev_auxdata *auxdata;
struct device_node *child;
struct platform_device *dev;
+ const char *bus_id = NULL;
+ void *platform_data = NULL;
int rc = 0;
- dev = of_platform_device_create(bus, NULL, parent);
+ /* Make sure it has a compatible property */
+ if (strict && (!of_get_property(bus, "compatible", NULL))) {
+ pr_debug("%s() - skipping %s, no compatible prop\n",
+ __func__, bus->full_name);
+ return 0;
+ }
+
+ auxdata = of_dev_lookup(lookup, bus);
+ if (auxdata) {
+ bus_id = auxdata->name;
+ platform_data = auxdata->platform_data;
+ }
+
+ if (of_device_is_compatible(bus, "arm,primecell")) {
+ of_amba_device_create(bus, bus_id, platform_data, parent);
+ return 0;
+ }
+
+ dev = of_platform_device_create_pdata(bus, bus_id, platform_data, parent);
if (!dev || !of_match_node(matches, bus))
return 0;
for_each_child_of_node(bus, child) {
pr_debug(" create child: %s\n", child->full_name);
- rc = of_platform_bus_create(child, matches, &dev->dev);
+ rc = of_platform_bus_create(child, matches, lookup, &dev->dev, strict);
if (rc) {
of_node_put(child);
break;
@@ -267,11 +405,11 @@
/* Do a self check of bus type, if there's a match, create children */
if (of_match_node(matches, root)) {
- rc = of_platform_bus_create(root, matches, parent);
+ rc = of_platform_bus_create(root, matches, NULL, parent, false);
} else for_each_child_of_node(root, child) {
if (!of_match_node(matches, child))
continue;
- rc = of_platform_bus_create(child, matches, parent);
+ rc = of_platform_bus_create(child, matches, NULL, parent, false);
if (rc)
break;
}
@@ -280,4 +418,44 @@
return rc;
}
EXPORT_SYMBOL(of_platform_bus_probe);
+
+/**
+ * of_platform_populate() - Populate platform_devices from device tree data
+ * @root: parent of the first level to probe or NULL for the root of the tree
+ * @matches: match table, NULL to use the default
+ * @parent: parent to hook devices from, NULL for toplevel
+ *
+ * Similar to of_platform_bus_probe(), this function walks the device tree
+ * and creates devices from nodes. It differs in that it follows the modern
+ * convention of requiring all device nodes to have a 'compatible' property,
+ * and it is suitable for creating devices which are children of the root
+ * node (of_platform_bus_probe will only create children of the root which
+ * are selected by the @matches argument).
+ *
+ * New board support should be using this function instead of
+ * of_platform_bus_probe().
+ *
+ * Returns 0 on success, < 0 on failure.
+ */
+int of_platform_populate(struct device_node *root,
+ const struct of_device_id *matches,
+ const struct of_dev_auxdata *lookup,
+ struct device *parent)
+{
+ struct device_node *child;
+ int rc = 0;
+
+ root = root ? of_node_get(root) : of_find_node_by_path("/");
+ if (!root)
+ return -EINVAL;
+
+ for_each_child_of_node(root, child) {
+ rc = of_platform_bus_create(child, matches, lookup, parent, true);
+ if (rc)
+ break;
+ }
+
+ of_node_put(root);
+ return rc;
+}
#endif /* !CONFIG_SPARC */
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index c911b24..e58cece 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -32,17 +32,17 @@
{
struct resource resource;
struct device_node *np = ofdev->dev.of_node;
- const __be32 *clk, *spd;
- const __be32 *prop;
- int ret, prop_size;
+ u32 clk, spd, prop;
+ int ret;
memset(port, 0, sizeof *port);
- spd = of_get_property(np, "current-speed", NULL);
- clk = of_get_property(np, "clock-frequency", NULL);
- if (!clk) {
+ if (of_property_read_u32(np, "clock-frequency", &clk)) {
dev_warn(&ofdev->dev, "no clock-frequency property set\n");
return -ENODEV;
}
+ /* If current-speed was set, then try not to change it. */
+ if (of_property_read_u32(np, "current-speed", &spd) == 0)
+ port->custom_divisor = clk / (16 * spd);
ret = of_address_to_resource(np, 0, &resource);
if (ret) {
@@ -54,25 +54,35 @@
port->mapbase = resource.start;
/* Check for shifted address mapping */
- prop = of_get_property(np, "reg-offset", &prop_size);
- if (prop && (prop_size == sizeof(u32)))
- port->mapbase += be32_to_cpup(prop);
+ if (of_property_read_u32(np, "reg-offset", &prop) == 0)
+ port->mapbase += prop;
/* Check for registers offset within the devices address range */
- prop = of_get_property(np, "reg-shift", &prop_size);
- if (prop && (prop_size == sizeof(u32)))
- port->regshift = be32_to_cpup(prop);
+ if (of_property_read_u32(np, "reg-shift", &prop) == 0)
+ port->regshift = prop;
port->irq = irq_of_parse_and_map(np, 0);
port->iotype = UPIO_MEM;
+ if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
+ switch (prop) {
+ case 1:
+ port->iotype = UPIO_MEM;
+ break;
+ case 4:
+ port->iotype = UPIO_MEM32;
+ break;
+ default:
+ dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n",
+ prop);
+ return -EINVAL;
+ }
+ }
+
port->type = type;
- port->uartclk = be32_to_cpup(clk);
+ port->uartclk = clk;
port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
| UPF_FIXED_PORT | UPF_FIXED_TYPE;
port->dev = &ofdev->dev;
- /* If current-speed was set, then try not to change it. */
- if (spd)
- port->custom_divisor = be32_to_cpup(clk) / (16 * (be32_to_cpup(spd)));
return 0;
}
@@ -171,6 +181,7 @@
{ .compatible = "ns16550", .data = (void *)PORT_16550, },
{ .compatible = "ns16750", .data = (void *)PORT_16750, },
{ .compatible = "ns16850", .data = (void *)PORT_16850, },
+ { .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, },
#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
{ .compatible = "ibm,qpace-nwp-serial",
.data = (void *)PORT_NWPSERIAL, },
diff --git a/include/linux/of.h b/include/linux/of.h
index bfc0ed1..bd716f8 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -195,6 +195,13 @@
extern struct property *of_find_property(const struct device_node *np,
const char *name,
int *lenp);
+extern int of_property_read_u32_array(const struct device_node *np,
+ char *propname,
+ u32 *out_values,
+ size_t sz);
+
+extern int of_property_read_string(struct device_node *np, char *propname,
+ const char **out_string);
extern int of_device_is_compatible(const struct device_node *device,
const char *);
extern int of_device_is_available(const struct device_node *device);
@@ -227,12 +234,32 @@
extern void of_detach_node(struct device_node *);
#endif
-#else
+#else /* CONFIG_OF */
static inline bool of_have_populated_dt(void)
{
return false;
}
+static inline int of_property_read_u32_array(const struct device_node *np,
+ char *propname, u32 *out_values, size_t sz)
+{
+ return -ENOSYS;
+}
+
+static inline int of_property_read_string(struct device_node *np,
+ char *propname, const char **out_string)
+{
+ return -ENOSYS;
+}
+
#endif /* CONFIG_OF */
+
+static inline int of_property_read_u32(const struct device_node *np,
+ char *propname,
+ u32 *out_value)
+{
+ return of_property_read_u32_array(np, propname, out_value, 1);
+}
+
#endif /* _LINUX_OF_H */
diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h
index fb51ae3..5a6f458 100644
--- a/include/linux/of_platform.h
+++ b/include/linux/of_platform.h
@@ -20,6 +20,40 @@
#include <linux/platform_device.h>
/**
+ * struct of_dev_auxdata - lookup table entry for device names & platform_data
+ * @compatible: compatible value of node to match against node
+ * @phys_addr: Start address of registers to match against node
+ * @name: Name to assign for matching nodes
+ * @platform_data: platform_data to assign for matching nodes
+ *
+ * This lookup table allows the caller of of_platform_populate() to override
+ * the names of devices when creating devices from the device tree. The table
+ * should be terminated with an empty entry. It also allows the platform_data
+ * pointer to be set.
+ *
+ * The reason for this functionality is that some Linux infrastructure uses
+ * the device name to look up a specific device, but the Linux-specific names
+ * are not encoded into the device tree, so the kernel needs to provide specific
+ * values.
+ *
+ * Note: Using an auxdata lookup table should be considered a last resort when
+ * converting a platform to use the DT. Normally the automatically generated
+ * device name will not matter, and drivers should obtain data from the device
+ * node instead of from an anonymouns platform_data pointer.
+ */
+struct of_dev_auxdata {
+ char *compatible;
+ resource_size_t phys_addr;
+ char *name;
+ void *platform_data;
+};
+
+/* Macro to simplify populating a lookup table */
+#define OF_DEV_AUXDATA(_compat,_phys,_name,_pdata) \
+ { .compatible = _compat, .phys_addr = _phys, .name = _name, \
+ .platform_data = _pdata }
+
+/**
* of_platform_driver - Legacy of-aware driver for platform devices.
*
* An of_platform_driver driver is attached to a basic platform_device on
@@ -40,6 +74,8 @@
#define to_of_platform_driver(drv) \
container_of(drv,struct of_platform_driver, driver)
+extern const struct of_device_id of_default_bus_match_table[];
+
/* Platform drivers register/unregister */
extern struct platform_device *of_device_alloc(struct device_node *np,
const char *bus_id,
@@ -55,6 +91,10 @@
extern int of_platform_bus_probe(struct device_node *root,
const struct of_device_id *matches,
struct device *parent);
+extern int of_platform_populate(struct device_node *root,
+ const struct of_device_id *matches,
+ const struct of_dev_auxdata *lookup,
+ struct device *parent);
#endif /* !CONFIG_SPARC */
#endif /* CONFIG_OF_DEVICE */