mtd: remove redundant dependency checks in Kconfig files
Look for dependency checks for "FOO" when inside of an "if FOO" block and remove them.
Signed-off-by: Kyle Spaans <kspaans@uwaterloo.ca>
Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index f8210bf..71eda03 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -319,7 +319,6 @@
config MTD_OOPS
tristate "Log panic/oops to an MTD buffer"
- depends on MTD
help
This enables panic and oops messages to be logged to a circular
buffer in a flash partition where it can be read back at some
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index ffc3720..4d4066f 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -37,7 +37,6 @@
config MTD_NAND_MUSEUM_IDS
bool "Enable chip ids for obsolete ancient NAND devices"
- depends on MTD_NAND
default n
help
Enable this option only when your board has first generation
@@ -101,13 +100,13 @@
config MTD_NAND_OMAP2
tristate "NAND Flash device on OMAP2 and OMAP3"
- depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3)
+ depends on ARM && (ARCH_OMAP2 || ARCH_OMAP3)
help
Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
config MTD_NAND_OMAP_PREFETCH
bool "GPMC prefetch support for NAND Flash device"
- depends on MTD_NAND && MTD_NAND_OMAP2
+ depends on MTD_NAND_OMAP2
default y
help
The NAND device can be accessed for Read/Write using GPMC PREFETCH engine
@@ -146,7 +145,7 @@
config MTD_NAND_BF5XX
tristate "Blackfin on-chip NAND Flash Controller driver"
- depends on (BF54x || BF52x) && MTD_NAND
+ depends on BF54x || BF52x
help
This enables the Blackfin on-chip NAND flash controller
@@ -236,7 +235,7 @@
config MTD_NAND_BCM_UMI
tristate "NAND Flash support for BCM Reference Boards"
- depends on ARCH_BCMRING && MTD_NAND
+ depends on ARCH_BCMRING
help
This enables the NAND flash controller on the BCM UMI block.
@@ -395,7 +394,7 @@
config MTD_NAND_PXA3xx
tristate "Support for NAND flash devices on PXA3xx"
- depends on MTD_NAND && (PXA3xx || ARCH_MMP)
+ depends on PXA3xx || ARCH_MMP
help
This enables the driver for the NAND flash device found on
PXA3xx processors
@@ -409,18 +408,18 @@
config MTD_NAND_CM_X270
tristate "Support for NAND Flash on CM-X270 modules"
- depends on MTD_NAND && MACH_ARMCORE
+ depends on MACH_ARMCORE
config MTD_NAND_PASEMI
tristate "NAND support for PA Semi PWRficient"
- depends on MTD_NAND && PPC_PASEMI
+ depends on PPC_PASEMI
help
Enables support for NAND Flash interface on PA Semi PWRficient
based boards
config MTD_NAND_TMIO
tristate "NAND Flash device on Toshiba Mobile IO Controller"
- depends on MTD_NAND && MFD_TMIO
+ depends on MFD_TMIO
help
Support for NAND flash connected to a Toshiba Mobile IO
Controller in some PDAs, including the Sharp SL6000x.
@@ -434,7 +433,6 @@
config MTD_NAND_PLATFORM
tristate "Support for generic platform NAND driver"
- depends on MTD_NAND
help
This implements a generic NAND driver for on-SOC platform
devices. You will need to provide platform-specific functions
@@ -442,14 +440,14 @@
config MTD_ALAUDA
tristate "MTD driver for Olympus MAUSB-10 and Fujifilm DPC-R1"
- depends on MTD_NAND && USB
+ depends on USB
help
These two (and possibly other) Alauda-based cardreaders for
SmartMedia and xD allow raw flash access.
config MTD_NAND_ORION
tristate "NAND Flash support for Marvell Orion SoC"
- depends on PLAT_ORION && MTD_NAND
+ depends on PLAT_ORION
help
This enables the NAND flash controller on Orion machines.
@@ -458,7 +456,7 @@
config MTD_NAND_FSL_ELBC
tristate "NAND support for Freescale eLBC controllers"
- depends on MTD_NAND && PPC_OF
+ depends on PPC_OF
help
Various Freescale chips, including the 8313, include a NAND Flash
Controller Module with built-in hardware ECC capabilities.
@@ -467,7 +465,7 @@
config MTD_NAND_FSL_UPM
tristate "Support for NAND on Freescale UPM"
- depends on MTD_NAND && (PPC_83xx || PPC_85xx)
+ depends on PPC_83xx || PPC_85xx
select FSL_LBC
help
Enables support for NAND Flash chips wired onto Freescale PowerPC
@@ -495,7 +493,7 @@
config MTD_NAND_SH_FLCTL
tristate "Support for NAND on Renesas SuperH FLCTL"
- depends on MTD_NAND && (SUPERH || ARCH_SHMOBILE)
+ depends on SUPERH || ARCH_SHMOBILE
help
Several Renesas SuperH CPU has FLCTL. This option enables support
for NAND Flash using FLCTL.
@@ -515,7 +513,7 @@
config MTD_NAND_SOCRATES
tristate "Support for NAND on Socrates board"
- depends on MTD_NAND && SOCRATES
+ depends on SOCRATES
help
Enables support for NAND Flash chips wired onto Socrates board.
diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index 9a49d68..3f32289 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -25,14 +25,14 @@
config MTD_ONENAND_OMAP2
tristate "OneNAND on OMAP2/OMAP3 support"
- depends on MTD_ONENAND && (ARCH_OMAP2 || ARCH_OMAP3)
+ depends on ARCH_OMAP2 || ARCH_OMAP3
help
Support for a OneNAND flash device connected to an OMAP2/OMAP3 CPU
via the GPMC memory controller.
config MTD_ONENAND_SAMSUNG
tristate "OneNAND on Samsung SOC controller support"
- depends on MTD_ONENAND && (ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210)
+ depends on ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210
help
Support for a OneNAND flash device connected to an Samsung SOC
S3C64XX/S5PC1XX controller.