ath9k_hw: Fix PAPRD training
The PAPRD training control registers have to be
programmed with values that depend on the chip. This patch
ensures that the correct values are chosen for the chip
in use.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
index 0ed3846..df9158f 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
@@ -204,7 +204,20 @@
AR_PHY_PAPRD_TRAINER_CNTL1_CF_PAPRD_AGC2_SETTLING, 28);
REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL1,
AR_PHY_PAPRD_TRAINER_CNTL1_CF_CF_PAPRD_TRAIN_ENABLE, 1);
- val = AR_SREV_9462(ah) ? 0x91 : 147;
+
+ if (AR_SREV_9485(ah)) {
+ val = 148;
+ } else {
+ if (IS_CHAN_2GHZ(ah->curchan)) {
+ if (AR_SREV_9462(ah) || AR_SREV_9565(ah))
+ val = 145;
+ else
+ val = 147;
+ } else {
+ val = 137;
+ }
+ }
+
REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL2,
AR_PHY_PAPRD_TRAINER_CNTL2_CF_PAPRD_INIT_RX_BB_GAIN, val);
REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
@@ -215,15 +228,24 @@
AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_NUM_CORR_STAGES, 7);
REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_MIN_LOOPBACK_DEL, 1);
- if (AR_SREV_9485(ah) || AR_SREV_9462(ah) || AR_SREV_9550(ah))
+
+ if (AR_SREV_9485(ah) ||
+ AR_SREV_9462(ah) ||
+ AR_SREV_9565(ah) ||
+ AR_SREV_9550(ah) ||
+ AR_SREV_9330(ah) ||
+ AR_SREV_9340(ah))
REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
- AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP,
- -3);
+ AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP, -3);
else
REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
- AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP,
- -6);
- val = AR_SREV_9462(ah) ? -10 : -15;
+ AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP, -6);
+
+ val = -10;
+
+ if (IS_CHAN_2GHZ(ah->curchan) && !AR_SREV_9462(ah) && !AR_SREV_9565(ah))
+ val = -15;
+
REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_ADC_DESIRED_SIZE,
val);