diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index e71fdfb..21d402c 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -79,15 +79,6 @@
 module_param(all, int, 0444);
 MODULE_PARM_DESC(all, "Grab all legacy port devices, even if PCI(0=off, 1=on)");
 
-struct legacy_data {
-	unsigned long timing;
-	u8 clock[2];
-	u8 last;
-	int fast;
-	struct platform_device *platform_dev;
-
-};
-
 enum controller {
 	BIOS = 0,
 	SNOOP = 1,
@@ -104,6 +95,14 @@
 	UNKNOWN = -1
 };
 
+struct legacy_data {
+	unsigned long timing;
+	u8 clock[2];
+	u8 last;
+	int fast;
+	enum controller type;
+	struct platform_device *platform_dev;
+};
 
 struct legacy_probe {
 	unsigned char *name;
@@ -637,77 +636,20 @@
 	.qc_issue	= opti82c46x_qc_issue,
 };
 
-static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
-	struct ata_timing t;
-	struct legacy_data *ld_qdi = ap->host->private_data;
-	int active, recovery;
-	u8 timing;
-
-	/* Get the timing data in cycles */
-	ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
-
-	if (ld_qdi->fast) {
-		active = 8 - clamp_val(t.active, 1, 8);
-		recovery = 18 - clamp_val(t.recover, 3, 18);
-	} else {
-		active = 9 - clamp_val(t.active, 2, 9);
-		recovery = 15 - clamp_val(t.recover, 0, 15);
-	}
-	timing = (recovery << 4) | active | 0x08;
-
-	ld_qdi->clock[adev->devno] = timing;
-
-	outb(timing, ld_qdi->timing);
-}
-
 /**
- *	qdi6580dp_set_piomode		-	PIO setup for dual channel
- *	@ap: Port
- *	@adev: Device
- *
- *	In dual channel mode the 6580 has one clock per channel and we have
- *	to software clockswitch in qc_issue.
- */
-
-static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
-	struct ata_timing t;
-	struct legacy_data *ld_qdi = ap->host->private_data;
-	int active, recovery;
-	u8 timing;
-
-	/* Get the timing data in cycles */
-	ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
-
-	if (ld_qdi->fast) {
-		active = 8 - clamp_val(t.active, 1, 8);
-		recovery = 18 - clamp_val(t.recover, 3, 18);
-	} else {
-		active = 9 - clamp_val(t.active, 2, 9);
-		recovery = 15 - clamp_val(t.recover, 0, 15);
-	}
-	timing = (recovery << 4) | active | 0x08;
-
-	ld_qdi->clock[adev->devno] = timing;
-
-	outb(timing, ld_qdi->timing + 2 * ap->port_no);
-	/* Clear the FIFO */
-	if (adev->class != ATA_DEV_ATA)
-		outb(0x5F, (ld_qdi->timing & 0xFFF0) + 3);
-}
-
-/**
- *	qdi6580_set_piomode		-	PIO setup for single channel
+ *	qdi65x0_set_piomode		-	PIO setup for QDI65x0
  *	@ap: Port
  *	@adev: Device
  *
  *	In single channel mode the 6580 has one clock per device and we can
  *	avoid the requirement to clock switch. We also have to load the timing
  *	into the right clock according to whether we are master or slave.
+ *
+ *	In dual channel mode the 6580 has one clock per channel and we have
+ *	to software clockswitch in qc_issue.
  */
 
-static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
+static void qdi65x0_set_piomode(struct ata_port *ap, struct ata_device *adev)
 {
 	struct ata_timing t;
 	struct legacy_data *ld_qdi = ap->host->private_data;
@@ -726,9 +668,14 @@
 	}
 	timing = (recovery << 4) | active | 0x08;
 	ld_qdi->clock[adev->devno] = timing;
-	outb(timing, ld_qdi->timing + 2 * adev->devno);
+
+	if (ld_qdi->type == QDI6580)
+		outb(timing, ld_qdi->timing + 2 * adev->devno);
+	else
+		outb(timing, ld_qdi->timing + 2 * ap->port_no);
+
 	/* Clear the FIFO */
-	if (adev->class != ATA_DEV_ATA)
+	if (ld_qdi->type != QDI6500 && adev->class != ATA_DEV_ATA)
 		outb(0x5F, (ld_qdi->timing & 0xFFF0) + 3);
 }
 
@@ -795,20 +742,20 @@
 
 static struct ata_port_operations qdi6500_port_ops = {
 	.inherits	= &legacy_base_port_ops,
-	.set_piomode	= qdi6500_set_piomode,
+	.set_piomode	= qdi65x0_set_piomode,
 	.qc_issue	= qdi_qc_issue,
 	.sff_data_xfer	= vlb32_data_xfer,
 };
 
 static struct ata_port_operations qdi6580_port_ops = {
 	.inherits	= &legacy_base_port_ops,
-	.set_piomode	= qdi6580_set_piomode,
+	.set_piomode	= qdi65x0_set_piomode,
 	.sff_data_xfer	= vlb32_data_xfer,
 };
 
 static struct ata_port_operations qdi6580dp_port_ops = {
 	.inherits	= &legacy_base_port_ops,
-	.set_piomode	= qdi6580dp_set_piomode,
+	.set_piomode	= qdi65x0_set_piomode,
 	.qc_issue	= qdi_qc_issue,
 	.sff_data_xfer	= vlb32_data_xfer,
 };
@@ -1028,6 +975,7 @@
 	ctrl_addr = devm_ioport_map(&pdev->dev, io + 0x0206, 1);
 	if (!io_addr || !ctrl_addr)
 		goto fail;
+	ld->type = probe->type;
 	if (controller->setup)
 		if (controller->setup(pdev, probe, ld) < 0)
 			goto fail;