| /* |
| * linux/drivers/video/vga16.c -- VGA 16-color framebuffer driver |
| * |
| * Copyright 1999 Ben Pfaff <pfaffben@debian.org> and Petr Vandrovec <VANDROVE@vc.cvut.cz> |
| * Based on VGA info at http://www.goodnet.com/~tinara/FreeVGA/home.htm |
| * Based on VESA framebuffer (c) 1998 Gerd Knorr <kraxel@goldbach.in-berlin.de> |
| * |
| * This file is subject to the terms and conditions of the GNU General |
| * Public License. See the file COPYING in the main directory of this |
| * archive for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/mm.h> |
| #include <linux/delay.h> |
| #include <linux/fb.h> |
| #include <linux/ioport.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/screen_info.h> |
| |
| #include <asm/io.h> |
| #include <video/vga.h> |
| |
| #define VGA_FB_PHYS 0xA0000 |
| #define VGA_FB_PHYS_LEN 65536 |
| |
| #define MODE_SKIP4 1 |
| #define MODE_8BPP 2 |
| #define MODE_CFB 4 |
| #define MODE_TEXT 8 |
| |
| /* --------------------------------------------------------------------- */ |
| |
| /* |
| * card parameters |
| */ |
| |
| struct vga16fb_par { |
| /* structure holding original VGA register settings when the |
| screen is blanked */ |
| struct { |
| unsigned char SeqCtrlIndex; /* Sequencer Index reg. */ |
| unsigned char CrtCtrlIndex; /* CRT-Contr. Index reg. */ |
| unsigned char CrtMiscIO; /* Miscellaneous register */ |
| unsigned char HorizontalTotal; /* CRT-Controller:00h */ |
| unsigned char HorizDisplayEnd; /* CRT-Controller:01h */ |
| unsigned char StartHorizRetrace;/* CRT-Controller:04h */ |
| unsigned char EndHorizRetrace; /* CRT-Controller:05h */ |
| unsigned char Overflow; /* CRT-Controller:07h */ |
| unsigned char StartVertRetrace; /* CRT-Controller:10h */ |
| unsigned char EndVertRetrace; /* CRT-Controller:11h */ |
| unsigned char ModeControl; /* CRT-Controller:17h */ |
| unsigned char ClockingMode; /* Seq-Controller:01h */ |
| } vga_state; |
| struct vgastate state; |
| unsigned int ref_count; |
| int palette_blanked, vesa_blanked, mode, isVGA; |
| u8 misc, pel_msk, vss, clkdiv; |
| u8 crtc[VGA_CRT_C]; |
| }; |
| |
| /* --------------------------------------------------------------------- */ |
| |
| static struct fb_var_screeninfo vga16fb_defined = { |
| .xres = 640, |
| .yres = 480, |
| .xres_virtual = 640, |
| .yres_virtual = 480, |
| .bits_per_pixel = 4, |
| .activate = FB_ACTIVATE_TEST, |
| .height = -1, |
| .width = -1, |
| .pixclock = 39721, |
| .left_margin = 48, |
| .right_margin = 16, |
| .upper_margin = 33, |
| .lower_margin = 10, |
| .hsync_len = 96, |
| .vsync_len = 2, |
| .vmode = FB_VMODE_NONINTERLACED, |
| }; |
| |
| /* name should not depend on EGA/VGA */ |
| static struct fb_fix_screeninfo vga16fb_fix = { |
| .id = "VGA16 VGA", |
| .smem_start = VGA_FB_PHYS, |
| .smem_len = VGA_FB_PHYS_LEN, |
| .type = FB_TYPE_VGA_PLANES, |
| .type_aux = FB_AUX_VGA_PLANES_VGA4, |
| .visual = FB_VISUAL_PSEUDOCOLOR, |
| .xpanstep = 8, |
| .ypanstep = 1, |
| .line_length = 640 / 8, |
| .accel = FB_ACCEL_NONE |
| }; |
| |
| /* The VGA's weird architecture often requires that we read a byte and |
| write a byte to the same location. It doesn't matter *what* byte |
| we write, however. This is because all the action goes on behind |
| the scenes in the VGA's 32-bit latch register, and reading and writing |
| video memory just invokes latch behavior. |
| |
| To avoid race conditions (is this necessary?), reading and writing |
| the memory byte should be done with a single instruction. One |
| suitable instruction is the x86 bitwise OR. The following |
| read-modify-write routine should optimize to one such bitwise |
| OR. */ |
| static inline void rmw(volatile char __iomem *p) |
| { |
| readb(p); |
| writeb(1, p); |
| } |
| |
| /* Set the Graphics Mode Register, and return its previous value. |
| Bits 0-1 are write mode, bit 3 is read mode. */ |
| static inline int setmode(int mode) |
| { |
| int oldmode; |
| |
| oldmode = vga_io_rgfx(VGA_GFX_MODE); |
| vga_io_w(VGA_GFX_D, mode); |
| return oldmode; |
| } |
| |
| /* Select the Bit Mask Register and return its value. */ |
| static inline int selectmask(void) |
| { |
| return vga_io_rgfx(VGA_GFX_BIT_MASK); |
| } |
| |
| /* Set the value of the Bit Mask Register. It must already have been |
| selected with selectmask(). */ |
| static inline void setmask(int mask) |
| { |
| vga_io_w(VGA_GFX_D, mask); |
| } |
| |
| /* Set the Data Rotate Register and return its old value. |
| Bits 0-2 are rotate count, bits 3-4 are logical operation |
| (0=NOP, 1=AND, 2=OR, 3=XOR). */ |
| static inline int setop(int op) |
| { |
| int oldop; |
| |
| oldop = vga_io_rgfx(VGA_GFX_DATA_ROTATE); |
| vga_io_w(VGA_GFX_D, op); |
| return oldop; |
| } |
| |
| /* Set the Enable Set/Reset Register and return its old value. |
| The code here always uses value 0xf for this register. */ |
| static inline int setsr(int sr) |
| { |
| int oldsr; |
| |
| oldsr = vga_io_rgfx(VGA_GFX_SR_ENABLE); |
| vga_io_w(VGA_GFX_D, sr); |
| return oldsr; |
| } |
| |
| /* Set the Set/Reset Register and return its old value. */ |
| static inline int setcolor(int color) |
| { |
| int oldcolor; |
| |
| oldcolor = vga_io_rgfx(VGA_GFX_SR_VALUE); |
| vga_io_w(VGA_GFX_D, color); |
| return oldcolor; |
| } |
| |
| /* Return the value in the Graphics Address Register. */ |
| static inline int getindex(void) |
| { |
| return vga_io_r(VGA_GFX_I); |
| } |
| |
| /* Set the value in the Graphics Address Register. */ |
| static inline void setindex(int index) |
| { |
| vga_io_w(VGA_GFX_I, index); |
| } |
| |
| static void vga16fb_pan_var(struct fb_info *info, |
| struct fb_var_screeninfo *var) |
| { |
| struct vga16fb_par *par = info->par; |
| u32 xoffset, pos; |
| |
| xoffset = var->xoffset; |
| if (info->var.bits_per_pixel == 8) { |
| pos = (info->var.xres_virtual * var->yoffset + xoffset) >> 2; |
| } else if (par->mode & MODE_TEXT) { |
| int fh = 16; // FIXME !!! font height. Fugde for now. |
| pos = (info->var.xres_virtual * (var->yoffset / fh) + xoffset) >> 3; |
| } else { |
| if (info->var.nonstd) |
| xoffset--; |
| pos = (info->var.xres_virtual * var->yoffset + xoffset) >> 3; |
| } |
| vga_io_wcrt(VGA_CRTC_START_HI, pos >> 8); |
| vga_io_wcrt(VGA_CRTC_START_LO, pos & 0xFF); |
| /* if we support CFB4, then we must! support xoffset with pixel |
| * granularity if someone supports xoffset in bit resolution */ |
| vga_io_r(VGA_IS1_RC); /* reset flip-flop */ |
| vga_io_w(VGA_ATT_IW, VGA_ATC_PEL); |
| if (info->var.bits_per_pixel == 8) |
| vga_io_w(VGA_ATT_IW, (xoffset & 3) << 1); |
| else |
| vga_io_w(VGA_ATT_IW, xoffset & 7); |
| vga_io_r(VGA_IS1_RC); |
| vga_io_w(VGA_ATT_IW, 0x20); |
| } |
| |
| static void vga16fb_update_fix(struct fb_info *info) |
| { |
| if (info->var.bits_per_pixel == 4) { |
| if (info->var.nonstd) { |
| info->fix.type = FB_TYPE_PACKED_PIXELS; |
| info->fix.line_length = info->var.xres_virtual / 2; |
| } else { |
| info->fix.type = FB_TYPE_VGA_PLANES; |
| info->fix.type_aux = FB_AUX_VGA_PLANES_VGA4; |
| info->fix.line_length = info->var.xres_virtual / 8; |
| } |
| } else if (info->var.bits_per_pixel == 0) { |
| info->fix.type = FB_TYPE_TEXT; |
| info->fix.type_aux = FB_AUX_TEXT_CGA; |
| info->fix.line_length = info->var.xres_virtual / 4; |
| } else { /* 8bpp */ |
| if (info->var.nonstd) { |
| info->fix.type = FB_TYPE_VGA_PLANES; |
| info->fix.type_aux = FB_AUX_VGA_PLANES_CFB8; |
| info->fix.line_length = info->var.xres_virtual / 4; |
| } else { |
| info->fix.type = FB_TYPE_PACKED_PIXELS; |
| info->fix.line_length = info->var.xres_virtual; |
| } |
| } |
| } |
| |
| static void vga16fb_clock_chip(struct vga16fb_par *par, |
| unsigned int pixclock, |
| const struct fb_info *info, |
| int mul, int div) |
| { |
| static const struct { |
| u32 pixclock; |
| u8 misc; |
| u8 seq_clock_mode; |
| } *ptr, *best, vgaclocks[] = { |
| { 79442 /* 12.587 */, 0x00, 0x08}, |
| { 70616 /* 14.161 */, 0x04, 0x08}, |
| { 39721 /* 25.175 */, 0x00, 0x00}, |
| { 35308 /* 28.322 */, 0x04, 0x00}, |
| { 0 /* bad */, 0x00, 0x00}}; |
| int err; |
| |
| pixclock = (pixclock * mul) / div; |
| best = vgaclocks; |
| err = pixclock - best->pixclock; |
| if (err < 0) err = -err; |
| for (ptr = vgaclocks + 1; ptr->pixclock; ptr++) { |
| int tmp; |
| |
| tmp = pixclock - ptr->pixclock; |
| if (tmp < 0) tmp = -tmp; |
| if (tmp < err) { |
| err = tmp; |
| best = ptr; |
| } |
| } |
| par->misc |= best->misc; |
| par->clkdiv = best->seq_clock_mode; |
| pixclock = (best->pixclock * div) / mul; |
| } |
| |
| #define FAIL(X) return -EINVAL |
| |
| static int vga16fb_open(struct fb_info *info, int user) |
| { |
| struct vga16fb_par *par = info->par; |
| |
| if (!par->ref_count) { |
| memset(&par->state, 0, sizeof(struct vgastate)); |
| par->state.flags = VGA_SAVE_FONTS | VGA_SAVE_MODE | |
| VGA_SAVE_CMAP; |
| save_vga(&par->state); |
| } |
| par->ref_count++; |
| |
| return 0; |
| } |
| |
| static int vga16fb_release(struct fb_info *info, int user) |
| { |
| struct vga16fb_par *par = info->par; |
| |
| if (!par->ref_count) |
| return -EINVAL; |
| |
| if (par->ref_count == 1) |
| restore_vga(&par->state); |
| par->ref_count--; |
| |
| return 0; |
| } |
| |
| static int vga16fb_check_var(struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| struct vga16fb_par *par = info->par; |
| u32 xres, right, hslen, left, xtotal; |
| u32 yres, lower, vslen, upper, ytotal; |
| u32 vxres, xoffset, vyres, yoffset; |
| u32 pos; |
| u8 r7, rMode; |
| int shift; |
| int mode; |
| u32 maxmem; |
| |
| par->pel_msk = 0xFF; |
| |
| if (var->bits_per_pixel == 4) { |
| if (var->nonstd) { |
| if (!par->isVGA) |
| return -EINVAL; |
| shift = 3; |
| mode = MODE_SKIP4 | MODE_CFB; |
| maxmem = 16384; |
| par->pel_msk = 0x0F; |
| } else { |
| shift = 3; |
| mode = 0; |
| maxmem = 65536; |
| } |
| } else if (var->bits_per_pixel == 8) { |
| if (!par->isVGA) |
| return -EINVAL; /* no support on EGA */ |
| shift = 2; |
| if (var->nonstd) { |
| mode = MODE_8BPP | MODE_CFB; |
| maxmem = 65536; |
| } else { |
| mode = MODE_SKIP4 | MODE_8BPP | MODE_CFB; |
| maxmem = 16384; |
| } |
| } else |
| return -EINVAL; |
| |
| xres = (var->xres + 7) & ~7; |
| vxres = (var->xres_virtual + 0xF) & ~0xF; |
| xoffset = (var->xoffset + 7) & ~7; |
| left = (var->left_margin + 7) & ~7; |
| right = (var->right_margin + 7) & ~7; |
| hslen = (var->hsync_len + 7) & ~7; |
| |
| if (vxres < xres) |
| vxres = xres; |
| if (xres + xoffset > vxres) |
| xoffset = vxres - xres; |
| |
| var->xres = xres; |
| var->right_margin = right; |
| var->hsync_len = hslen; |
| var->left_margin = left; |
| var->xres_virtual = vxres; |
| var->xoffset = xoffset; |
| |
| xres >>= shift; |
| right >>= shift; |
| hslen >>= shift; |
| left >>= shift; |
| vxres >>= shift; |
| xtotal = xres + right + hslen + left; |
| if (xtotal >= 256) |
| FAIL("xtotal too big"); |
| if (hslen > 32) |
| FAIL("hslen too big"); |
| if (right + hslen + left > 64) |
| FAIL("hblank too big"); |
| par->crtc[VGA_CRTC_H_TOTAL] = xtotal - 5; |
| par->crtc[VGA_CRTC_H_BLANK_START] = xres - 1; |
| par->crtc[VGA_CRTC_H_DISP] = xres - 1; |
| pos = xres + right; |
| par->crtc[VGA_CRTC_H_SYNC_START] = pos; |
| pos += hslen; |
| par->crtc[VGA_CRTC_H_SYNC_END] = pos & 0x1F; |
| pos += left - 2; /* blank_end + 2 <= total + 5 */ |
| par->crtc[VGA_CRTC_H_BLANK_END] = (pos & 0x1F) | 0x80; |
| if (pos & 0x20) |
| par->crtc[VGA_CRTC_H_SYNC_END] |= 0x80; |
| |
| yres = var->yres; |
| lower = var->lower_margin; |
| vslen = var->vsync_len; |
| upper = var->upper_margin; |
| vyres = var->yres_virtual; |
| yoffset = var->yoffset; |
| |
| if (yres > vyres) |
| vyres = yres; |
| if (vxres * vyres > maxmem) { |
| vyres = maxmem / vxres; |
| if (vyres < yres) |
| return -ENOMEM; |
| } |
| if (yoffset + yres > vyres) |
| yoffset = vyres - yres; |
| var->yres = yres; |
| var->lower_margin = lower; |
| var->vsync_len = vslen; |
| var->upper_margin = upper; |
| var->yres_virtual = vyres; |
| var->yoffset = yoffset; |
| |
| if (var->vmode & FB_VMODE_DOUBLE) { |
| yres <<= 1; |
| lower <<= 1; |
| vslen <<= 1; |
| upper <<= 1; |
| } |
| ytotal = yres + lower + vslen + upper; |
| if (ytotal > 1024) { |
| ytotal >>= 1; |
| yres >>= 1; |
| lower >>= 1; |
| vslen >>= 1; |
| upper >>= 1; |
| rMode = 0x04; |
| } else |
| rMode = 0x00; |
| if (ytotal > 1024) |
| FAIL("ytotal too big"); |
| if (vslen > 16) |
| FAIL("vslen too big"); |
| par->crtc[VGA_CRTC_V_TOTAL] = ytotal - 2; |
| r7 = 0x10; /* disable linecompare */ |
| if (ytotal & 0x100) r7 |= 0x01; |
| if (ytotal & 0x200) r7 |= 0x20; |
| par->crtc[VGA_CRTC_PRESET_ROW] = 0; |
| par->crtc[VGA_CRTC_MAX_SCAN] = 0x40; /* 1 scanline, no linecmp */ |
| if (var->vmode & FB_VMODE_DOUBLE) |
| par->crtc[VGA_CRTC_MAX_SCAN] |= 0x80; |
| par->crtc[VGA_CRTC_CURSOR_START] = 0x20; |
| par->crtc[VGA_CRTC_CURSOR_END] = 0x00; |
| if ((mode & (MODE_CFB | MODE_8BPP)) == MODE_CFB) |
| xoffset--; |
| pos = yoffset * vxres + (xoffset >> shift); |
| par->crtc[VGA_CRTC_START_HI] = pos >> 8; |
| par->crtc[VGA_CRTC_START_LO] = pos & 0xFF; |
| par->crtc[VGA_CRTC_CURSOR_HI] = 0x00; |
| par->crtc[VGA_CRTC_CURSOR_LO] = 0x00; |
| pos = yres - 1; |
| par->crtc[VGA_CRTC_V_DISP_END] = pos & 0xFF; |
| par->crtc[VGA_CRTC_V_BLANK_START] = pos & 0xFF; |
| if (pos & 0x100) |
| r7 |= 0x0A; /* 0x02 -> DISP_END, 0x08 -> BLANK_START */ |
| if (pos & 0x200) { |
| r7 |= 0x40; /* 0x40 -> DISP_END */ |
| par->crtc[VGA_CRTC_MAX_SCAN] |= 0x20; /* BLANK_START */ |
| } |
| pos += lower; |
| par->crtc[VGA_CRTC_V_SYNC_START] = pos & 0xFF; |
| if (pos & 0x100) |
| r7 |= 0x04; |
| if (pos & 0x200) |
| r7 |= 0x80; |
| pos += vslen; |
| par->crtc[VGA_CRTC_V_SYNC_END] = (pos & 0x0F) & ~0x10; /* disabled IRQ */ |
| pos += upper - 1; /* blank_end + 1 <= ytotal + 2 */ |
| par->crtc[VGA_CRTC_V_BLANK_END] = pos & 0xFF; /* 0x7F for original VGA, |
| but some SVGA chips requires all 8 bits to set */ |
| if (vxres >= 512) |
| FAIL("vxres too long"); |
| par->crtc[VGA_CRTC_OFFSET] = vxres >> 1; |
| if (mode & MODE_SKIP4) |
| par->crtc[VGA_CRTC_UNDERLINE] = 0x5F; /* 256, cfb8 */ |
| else |
| par->crtc[VGA_CRTC_UNDERLINE] = 0x1F; /* 16, vgap */ |
| par->crtc[VGA_CRTC_MODE] = rMode | ((mode & MODE_TEXT) ? 0xA3 : 0xE3); |
| par->crtc[VGA_CRTC_LINE_COMPARE] = 0xFF; |
| par->crtc[VGA_CRTC_OVERFLOW] = r7; |
| |
| par->vss = 0x00; /* 3DA */ |
| |
| par->misc = 0xE3; /* enable CPU, ports 0x3Dx, positive sync */ |
| if (var->sync & FB_SYNC_HOR_HIGH_ACT) |
| par->misc &= ~0x40; |
| if (var->sync & FB_SYNC_VERT_HIGH_ACT) |
| par->misc &= ~0x80; |
| |
| par->mode = mode; |
| |
| if (mode & MODE_8BPP) |
| /* pixel clock == vga clock / 2 */ |
| vga16fb_clock_chip(par, var->pixclock, info, 1, 2); |
| else |
| /* pixel clock == vga clock */ |
| vga16fb_clock_chip(par, var->pixclock, info, 1, 1); |
| |
| var->red.offset = var->green.offset = var->blue.offset = |
| var->transp.offset = 0; |
| var->red.length = var->green.length = var->blue.length = |
| (par->isVGA) ? 6 : 2; |
| var->transp.length = 0; |
| var->activate = FB_ACTIVATE_NOW; |
| var->height = -1; |
| var->width = -1; |
| var->accel_flags = 0; |
| return 0; |
| } |
| #undef FAIL |
| |
| static int vga16fb_set_par(struct fb_info *info) |
| { |
| struct vga16fb_par *par = info->par; |
| u8 gdc[VGA_GFX_C]; |
| u8 seq[VGA_SEQ_C]; |
| u8 atc[VGA_ATT_C]; |
| int fh, i; |
| |
| seq[VGA_SEQ_CLOCK_MODE] = 0x01 | par->clkdiv; |
| if (par->mode & MODE_TEXT) |
| seq[VGA_SEQ_PLANE_WRITE] = 0x03; |
| else |
| seq[VGA_SEQ_PLANE_WRITE] = 0x0F; |
| seq[VGA_SEQ_CHARACTER_MAP] = 0x00; |
| if (par->mode & MODE_TEXT) |
| seq[VGA_SEQ_MEMORY_MODE] = 0x03; |
| else if (par->mode & MODE_SKIP4) |
| seq[VGA_SEQ_MEMORY_MODE] = 0x0E; |
| else |
| seq[VGA_SEQ_MEMORY_MODE] = 0x06; |
| |
| gdc[VGA_GFX_SR_VALUE] = 0x00; |
| gdc[VGA_GFX_SR_ENABLE] = 0x00; |
| gdc[VGA_GFX_COMPARE_VALUE] = 0x00; |
| gdc[VGA_GFX_DATA_ROTATE] = 0x00; |
| gdc[VGA_GFX_PLANE_READ] = 0; |
| if (par->mode & MODE_TEXT) { |
| gdc[VGA_GFX_MODE] = 0x10; |
| gdc[VGA_GFX_MISC] = 0x06; |
| } else { |
| if (par->mode & MODE_CFB) |
| gdc[VGA_GFX_MODE] = 0x40; |
| else |
| gdc[VGA_GFX_MODE] = 0x00; |
| gdc[VGA_GFX_MISC] = 0x05; |
| } |
| gdc[VGA_GFX_COMPARE_MASK] = 0x0F; |
| gdc[VGA_GFX_BIT_MASK] = 0xFF; |
| |
| for (i = 0x00; i < 0x10; i++) |
| atc[i] = i; |
| if (par->mode & MODE_TEXT) |
| atc[VGA_ATC_MODE] = 0x04; |
| else if (par->mode & MODE_8BPP) |
| atc[VGA_ATC_MODE] = 0x41; |
| else |
| atc[VGA_ATC_MODE] = 0x81; |
| atc[VGA_ATC_OVERSCAN] = 0x00; /* 0 for EGA, 0xFF for VGA */ |
| atc[VGA_ATC_PLANE_ENABLE] = 0x0F; |
| if (par->mode & MODE_8BPP) |
| atc[VGA_ATC_PEL] = (info->var.xoffset & 3) << 1; |
| else |
| atc[VGA_ATC_PEL] = info->var.xoffset & 7; |
| atc[VGA_ATC_COLOR_PAGE] = 0x00; |
| |
| if (par->mode & MODE_TEXT) { |
| fh = 16; // FIXME !!! Fudge font height. |
| par->crtc[VGA_CRTC_MAX_SCAN] = (par->crtc[VGA_CRTC_MAX_SCAN] |
| & ~0x1F) | (fh - 1); |
| } |
| |
| vga_io_w(VGA_MIS_W, vga_io_r(VGA_MIS_R) | 0x01); |
| |
| /* Enable graphics register modification */ |
| if (!par->isVGA) { |
| vga_io_w(EGA_GFX_E0, 0x00); |
| vga_io_w(EGA_GFX_E1, 0x01); |
| } |
| |
| /* update misc output register */ |
| vga_io_w(VGA_MIS_W, par->misc); |
| |
| /* synchronous reset on */ |
| vga_io_wseq(0x00, 0x01); |
| |
| if (par->isVGA) |
| vga_io_w(VGA_PEL_MSK, par->pel_msk); |
| |
| /* write sequencer registers */ |
| vga_io_wseq(VGA_SEQ_CLOCK_MODE, seq[VGA_SEQ_CLOCK_MODE] | 0x20); |
| for (i = 2; i < VGA_SEQ_C; i++) { |
| vga_io_wseq(i, seq[i]); |
| } |
| |
| /* synchronous reset off */ |
| vga_io_wseq(0x00, 0x03); |
| |
| /* deprotect CRT registers 0-7 */ |
| vga_io_wcrt(VGA_CRTC_V_SYNC_END, par->crtc[VGA_CRTC_V_SYNC_END]); |
| |
| /* write CRT registers */ |
| for (i = 0; i < VGA_CRTC_REGS; i++) { |
| vga_io_wcrt(i, par->crtc[i]); |
| } |
| |
| /* write graphics controller registers */ |
| for (i = 0; i < VGA_GFX_C; i++) { |
| vga_io_wgfx(i, gdc[i]); |
| } |
| |
| /* write attribute controller registers */ |
| for (i = 0; i < VGA_ATT_C; i++) { |
| vga_io_r(VGA_IS1_RC); /* reset flip-flop */ |
| vga_io_wattr(i, atc[i]); |
| } |
| |
| /* Wait for screen to stabilize. */ |
| mdelay(50); |
| |
| vga_io_wseq(VGA_SEQ_CLOCK_MODE, seq[VGA_SEQ_CLOCK_MODE]); |
| |
| vga_io_r(VGA_IS1_RC); |
| vga_io_w(VGA_ATT_IW, 0x20); |
| |
| vga16fb_update_fix(info); |
| return 0; |
| } |
| |
| static void ega16_setpalette(int regno, unsigned red, unsigned green, unsigned blue) |
| { |
| static const unsigned char map[] = { 000, 001, 010, 011 }; |
| int val; |
| |
| if (regno >= 16) |
| return; |
| val = map[red>>14] | ((map[green>>14]) << 1) | ((map[blue>>14]) << 2); |
| vga_io_r(VGA_IS1_RC); /* ! 0x3BA */ |
| vga_io_wattr(regno, val); |
| vga_io_r(VGA_IS1_RC); /* some clones need it */ |
| vga_io_w(VGA_ATT_IW, 0x20); /* unblank screen */ |
| } |
| |
| static void vga16_setpalette(int regno, unsigned red, unsigned green, unsigned blue) |
| { |
| outb(regno, VGA_PEL_IW); |
| outb(red >> 10, VGA_PEL_D); |
| outb(green >> 10, VGA_PEL_D); |
| outb(blue >> 10, VGA_PEL_D); |
| } |
| |
| static int vga16fb_setcolreg(unsigned regno, unsigned red, unsigned green, |
| unsigned blue, unsigned transp, |
| struct fb_info *info) |
| { |
| struct vga16fb_par *par = info->par; |
| int gray; |
| |
| /* |
| * Set a single color register. The values supplied are |
| * already rounded down to the hardware's capabilities |
| * (according to the entries in the `var' structure). Return |
| * != 0 for invalid regno. |
| */ |
| |
| if (regno >= 256) |
| return 1; |
| |
| gray = info->var.grayscale; |
| |
| if (gray) { |
| /* gray = 0.30*R + 0.59*G + 0.11*B */ |
| red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8; |
| } |
| if (par->isVGA) |
| vga16_setpalette(regno,red,green,blue); |
| else |
| ega16_setpalette(regno,red,green,blue); |
| return 0; |
| } |
| |
| static int vga16fb_pan_display(struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| vga16fb_pan_var(info, var); |
| return 0; |
| } |
| |
| /* The following VESA blanking code is taken from vgacon.c. The VGA |
| blanking code was originally by Huang shi chao, and modified by |
| Christoph Rimek (chrimek@toppoint.de) and todd j. derr |
| (tjd@barefoot.org) for Linux. */ |
| |
| static void vga_vesa_blank(struct vga16fb_par *par, int mode) |
| { |
| unsigned char SeqCtrlIndex = vga_io_r(VGA_SEQ_I); |
| unsigned char CrtCtrlIndex = vga_io_r(VGA_CRT_IC); |
| |
| /* save original values of VGA controller registers */ |
| if(!par->vesa_blanked) { |
| par->vga_state.CrtMiscIO = vga_io_r(VGA_MIS_R); |
| //sti(); |
| |
| par->vga_state.HorizontalTotal = vga_io_rcrt(0x00); /* HorizontalTotal */ |
| par->vga_state.HorizDisplayEnd = vga_io_rcrt(0x01); /* HorizDisplayEnd */ |
| par->vga_state.StartHorizRetrace = vga_io_rcrt(0x04); /* StartHorizRetrace */ |
| par->vga_state.EndHorizRetrace = vga_io_rcrt(0x05); /* EndHorizRetrace */ |
| par->vga_state.Overflow = vga_io_rcrt(0x07); /* Overflow */ |
| par->vga_state.StartVertRetrace = vga_io_rcrt(0x10); /* StartVertRetrace */ |
| par->vga_state.EndVertRetrace = vga_io_rcrt(0x11); /* EndVertRetrace */ |
| par->vga_state.ModeControl = vga_io_rcrt(0x17); /* ModeControl */ |
| par->vga_state.ClockingMode = vga_io_rseq(0x01); /* ClockingMode */ |
| } |
| |
| /* assure that video is enabled */ |
| /* "0x20" is VIDEO_ENABLE_bit in register 01 of sequencer */ |
| vga_io_wseq(0x01, par->vga_state.ClockingMode | 0x20); |
| |
| /* test for vertical retrace in process.... */ |
| if ((par->vga_state.CrtMiscIO & 0x80) == 0x80) |
| vga_io_w(VGA_MIS_W, par->vga_state.CrtMiscIO & 0xef); |
| |
| /* |
| * Set <End of vertical retrace> to minimum (0) and |
| * <Start of vertical Retrace> to maximum (incl. overflow) |
| * Result: turn off vertical sync (VSync) pulse. |
| */ |
| if (mode & FB_BLANK_VSYNC_SUSPEND) { |
| vga_io_wcrt(VGA_CRTC_V_SYNC_START, 0xff); |
| vga_io_wcrt(VGA_CRTC_V_SYNC_END, 0x40); |
| /* bits 9,10 of vert. retrace */ |
| vga_io_wcrt(VGA_CRTC_OVERFLOW, par->vga_state.Overflow | 0x84); |
| } |
| |
| if (mode & FB_BLANK_HSYNC_SUSPEND) { |
| /* |
| * Set <End of horizontal retrace> to minimum (0) and |
| * <Start of horizontal Retrace> to maximum |
| * Result: turn off horizontal sync (HSync) pulse. |
| */ |
| vga_io_wcrt(VGA_CRTC_H_SYNC_START, 0xff); |
| vga_io_wcrt(VGA_CRTC_H_SYNC_END, 0x00); |
| } |
| |
| /* restore both index registers */ |
| outb_p(SeqCtrlIndex, VGA_SEQ_I); |
| outb_p(CrtCtrlIndex, VGA_CRT_IC); |
| } |
| |
| static void vga_vesa_unblank(struct vga16fb_par *par) |
| { |
| unsigned char SeqCtrlIndex = vga_io_r(VGA_SEQ_I); |
| unsigned char CrtCtrlIndex = vga_io_r(VGA_CRT_IC); |
| |
| /* restore original values of VGA controller registers */ |
| vga_io_w(VGA_MIS_W, par->vga_state.CrtMiscIO); |
| |
| /* HorizontalTotal */ |
| vga_io_wcrt(0x00, par->vga_state.HorizontalTotal); |
| /* HorizDisplayEnd */ |
| vga_io_wcrt(0x01, par->vga_state.HorizDisplayEnd); |
| /* StartHorizRetrace */ |
| vga_io_wcrt(0x04, par->vga_state.StartHorizRetrace); |
| /* EndHorizRetrace */ |
| vga_io_wcrt(0x05, par->vga_state.EndHorizRetrace); |
| /* Overflow */ |
| vga_io_wcrt(0x07, par->vga_state.Overflow); |
| /* StartVertRetrace */ |
| vga_io_wcrt(0x10, par->vga_state.StartVertRetrace); |
| /* EndVertRetrace */ |
| vga_io_wcrt(0x11, par->vga_state.EndVertRetrace); |
| /* ModeControl */ |
| vga_io_wcrt(0x17, par->vga_state.ModeControl); |
| /* ClockingMode */ |
| vga_io_wseq(0x01, par->vga_state.ClockingMode); |
| |
| /* restore index/control registers */ |
| vga_io_w(VGA_SEQ_I, SeqCtrlIndex); |
| vga_io_w(VGA_CRT_IC, CrtCtrlIndex); |
| } |
| |
| static void vga_pal_blank(void) |
| { |
| int i; |
| |
| for (i=0; i<16; i++) { |
| outb_p(i, VGA_PEL_IW); |
| outb_p(0, VGA_PEL_D); |
| outb_p(0, VGA_PEL_D); |
| outb_p(0, VGA_PEL_D); |
| } |
| } |
| |
| /* 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off */ |
| static int vga16fb_blank(int blank, struct fb_info *info) |
| { |
| struct vga16fb_par *par = info->par; |
| |
| switch (blank) { |
| case FB_BLANK_UNBLANK: /* Unblank */ |
| if (par->vesa_blanked) { |
| vga_vesa_unblank(par); |
| par->vesa_blanked = 0; |
| } |
| if (par->palette_blanked) { |
| par->palette_blanked = 0; |
| } |
| break; |
| case FB_BLANK_NORMAL: /* blank */ |
| vga_pal_blank(); |
| par->palette_blanked = 1; |
| break; |
| default: /* VESA blanking */ |
| vga_vesa_blank(par, blank); |
| par->vesa_blanked = 1; |
| break; |
| } |
| return 0; |
| } |
| |
| static void vga_8planes_fillrect(struct fb_info *info, const struct fb_fillrect *rect) |
| { |
| u32 dx = rect->dx, width = rect->width; |
| char oldindex = getindex(); |
| char oldmode = setmode(0x40); |
| char oldmask = selectmask(); |
| int line_ofs, height; |
| char oldop, oldsr; |
| char __iomem *where; |
| |
| dx /= 4; |
| where = info->screen_base + dx + rect->dy * info->fix.line_length; |
| |
| if (rect->rop == ROP_COPY) { |
| oldop = setop(0); |
| oldsr = setsr(0); |
| |
| width /= 4; |
| line_ofs = info->fix.line_length - width; |
| setmask(0xff); |
| |
| height = rect->height; |
| |
| while (height--) { |
| int x; |
| |
| /* we can do memset... */ |
| for (x = width; x > 0; --x) { |
| writeb(rect->color, where); |
| where++; |
| } |
| where += line_ofs; |
| } |
| } else { |
| char oldcolor = setcolor(0xf); |
| int y; |
| |
| oldop = setop(0x18); |
| oldsr = setsr(0xf); |
| setmask(0x0F); |
| for (y = 0; y < rect->height; y++) { |
| rmw(where); |
| rmw(where+1); |
| where += info->fix.line_length; |
| } |
| setcolor(oldcolor); |
| } |
| setmask(oldmask); |
| setsr(oldsr); |
| setop(oldop); |
| setmode(oldmode); |
| setindex(oldindex); |
| } |
| |
| static void vga16fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) |
| { |
| int x, x2, y2, vxres, vyres, width, height, line_ofs; |
| char __iomem *dst; |
| |
| vxres = info->var.xres_virtual; |
| vyres = info->var.yres_virtual; |
| |
| if (!rect->width || !rect->height || rect->dx > vxres || rect->dy > vyres) |
| return; |
| |
| /* We could use hardware clipping but on many cards you get around |
| * hardware clipping by writing to framebuffer directly. */ |
| |
| x2 = rect->dx + rect->width; |
| y2 = rect->dy + rect->height; |
| x2 = x2 < vxres ? x2 : vxres; |
| y2 = y2 < vyres ? y2 : vyres; |
| width = x2 - rect->dx; |
| |
| switch (info->fix.type) { |
| case FB_TYPE_VGA_PLANES: |
| if (info->fix.type_aux == FB_AUX_VGA_PLANES_VGA4) { |
| |
| height = y2 - rect->dy; |
| width = rect->width/8; |
| |
| line_ofs = info->fix.line_length - width; |
| dst = info->screen_base + (rect->dx/8) + rect->dy * info->fix.line_length; |
| |
| switch (rect->rop) { |
| case ROP_COPY: |
| setmode(0); |
| setop(0); |
| setsr(0xf); |
| setcolor(rect->color); |
| selectmask(); |
| |
| setmask(0xff); |
| |
| while (height--) { |
| for (x = 0; x < width; x++) { |
| writeb(0, dst); |
| dst++; |
| } |
| dst += line_ofs; |
| } |
| break; |
| case ROP_XOR: |
| setmode(0); |
| setop(0x18); |
| setsr(0xf); |
| setcolor(0xf); |
| selectmask(); |
| |
| setmask(0xff); |
| while (height--) { |
| for (x = 0; x < width; x++) { |
| rmw(dst); |
| dst++; |
| } |
| dst += line_ofs; |
| } |
| break; |
| } |
| } else |
| vga_8planes_fillrect(info, rect); |
| break; |
| case FB_TYPE_PACKED_PIXELS: |
| default: |
| cfb_fillrect(info, rect); |
| break; |
| } |
| } |
| |
| static void vga_8planes_copyarea(struct fb_info *info, const struct fb_copyarea *area) |
| { |
| char oldindex = getindex(); |
| char oldmode = setmode(0x41); |
| char oldop = setop(0); |
| char oldsr = setsr(0xf); |
| int height, line_ofs, x; |
| u32 sx, dx, width; |
| char __iomem *dest; |
| char __iomem *src; |
| |
| height = area->height; |
| |
| sx = area->sx / 4; |
| dx = area->dx / 4; |
| width = area->width / 4; |
| |
| if (area->dy < area->sy || (area->dy == area->sy && dx < sx)) { |
| line_ofs = info->fix.line_length - width; |
| dest = info->screen_base + dx + area->dy * info->fix.line_length; |
| src = info->screen_base + sx + area->sy * info->fix.line_length; |
| while (height--) { |
| for (x = 0; x < width; x++) { |
| readb(src); |
| writeb(0, dest); |
| src++; |
| dest++; |
| } |
| src += line_ofs; |
| dest += line_ofs; |
| } |
| } else { |
| line_ofs = info->fix.line_length - width; |
| dest = info->screen_base + dx + width + |
| (area->dy + height - 1) * info->fix.line_length; |
| src = info->screen_base + sx + width + |
| (area->sy + height - 1) * info->fix.line_length; |
| while (height--) { |
| for (x = 0; x < width; x++) { |
| --src; |
| --dest; |
| readb(src); |
| writeb(0, dest); |
| } |
| src -= line_ofs; |
| dest -= line_ofs; |
| } |
| } |
| |
| setsr(oldsr); |
| setop(oldop); |
| setmode(oldmode); |
| setindex(oldindex); |
| } |
| |
| static void vga16fb_copyarea(struct fb_info *info, const struct fb_copyarea *area) |
| { |
| u32 dx = area->dx, dy = area->dy, sx = area->sx, sy = area->sy; |
| int x, x2, y2, old_dx, old_dy, vxres, vyres; |
| int height, width, line_ofs; |
| char __iomem *dst = NULL; |
| char __iomem *src = NULL; |
| |
| vxres = info->var.xres_virtual; |
| vyres = info->var.yres_virtual; |
| |
| if (area->dx > vxres || area->sx > vxres || area->dy > vyres || |
| area->sy > vyres) |
| return; |
| |
| /* clip the destination */ |
| old_dx = area->dx; |
| old_dy = area->dy; |
| |
| /* |
| * We could use hardware clipping but on many cards you get around |
| * hardware clipping by writing to framebuffer directly. |
| */ |
| x2 = area->dx + area->width; |
| y2 = area->dy + area->height; |
| dx = area->dx > 0 ? area->dx : 0; |
| dy = area->dy > 0 ? area->dy : 0; |
| x2 = x2 < vxres ? x2 : vxres; |
| y2 = y2 < vyres ? y2 : vyres; |
| width = x2 - dx; |
| height = y2 - dy; |
| |
| if (sx + dx < old_dx || sy + dy < old_dy) |
| return; |
| |
| /* update sx1,sy1 */ |
| sx += (dx - old_dx); |
| sy += (dy - old_dy); |
| |
| /* the source must be completely inside the virtual screen */ |
| if (sx + width > vxres || sy + height > vyres) |
| return; |
| |
| switch (info->fix.type) { |
| case FB_TYPE_VGA_PLANES: |
| if (info->fix.type_aux == FB_AUX_VGA_PLANES_VGA4) { |
| width = width/8; |
| height = height; |
| line_ofs = info->fix.line_length - width; |
| |
| setmode(1); |
| setop(0); |
| setsr(0xf); |
| |
| if (dy < sy || (dy == sy && dx < sx)) { |
| dst = info->screen_base + (dx/8) + dy * info->fix.line_length; |
| src = info->screen_base + (sx/8) + sy * info->fix.line_length; |
| while (height--) { |
| for (x = 0; x < width; x++) { |
| readb(src); |
| writeb(0, dst); |
| dst++; |
| src++; |
| } |
| src += line_ofs; |
| dst += line_ofs; |
| } |
| } else { |
| dst = info->screen_base + (dx/8) + width + |
| (dy + height - 1) * info->fix.line_length; |
| src = info->screen_base + (sx/8) + width + |
| (sy + height - 1) * info->fix.line_length; |
| while (height--) { |
| for (x = 0; x < width; x++) { |
| dst--; |
| src--; |
| readb(src); |
| writeb(0, dst); |
| } |
| src -= line_ofs; |
| dst -= line_ofs; |
| } |
| } |
| } else |
| vga_8planes_copyarea(info, area); |
| break; |
| case FB_TYPE_PACKED_PIXELS: |
| default: |
| cfb_copyarea(info, area); |
| break; |
| } |
| } |
| |
| #define TRANS_MASK_LOW {0x0,0x8,0x4,0xC,0x2,0xA,0x6,0xE,0x1,0x9,0x5,0xD,0x3,0xB,0x7,0xF} |
| #define TRANS_MASK_HIGH {0x000, 0x800, 0x400, 0xC00, 0x200, 0xA00, 0x600, 0xE00, \ |
| 0x100, 0x900, 0x500, 0xD00, 0x300, 0xB00, 0x700, 0xF00} |
| |
| #if defined(__LITTLE_ENDIAN) |
| static const u16 transl_l[] = TRANS_MASK_LOW; |
| static const u16 transl_h[] = TRANS_MASK_HIGH; |
| #elif defined(__BIG_ENDIAN) |
| static const u16 transl_l[] = TRANS_MASK_HIGH; |
| static const u16 transl_h[] = TRANS_MASK_LOW; |
| #else |
| #error "Only __BIG_ENDIAN and __LITTLE_ENDIAN are supported in vga-planes" |
| #endif |
| |
| static void vga_8planes_imageblit(struct fb_info *info, const struct fb_image *image) |
| { |
| char oldindex = getindex(); |
| char oldmode = setmode(0x40); |
| char oldop = setop(0); |
| char oldsr = setsr(0); |
| char oldmask = selectmask(); |
| const char *cdat = image->data; |
| u32 dx = image->dx; |
| char __iomem *where; |
| int y; |
| |
| dx /= 4; |
| where = info->screen_base + dx + image->dy * info->fix.line_length; |
| |
| setmask(0xff); |
| writeb(image->bg_color, where); |
| readb(where); |
| selectmask(); |
| setmask(image->fg_color ^ image->bg_color); |
| setmode(0x42); |
| setop(0x18); |
| for (y = 0; y < image->height; y++, where += info->fix.line_length) |
| writew(transl_h[cdat[y]&0xF] | transl_l[cdat[y] >> 4], where); |
| setmask(oldmask); |
| setsr(oldsr); |
| setop(oldop); |
| setmode(oldmode); |
| setindex(oldindex); |
| } |
| |
| static void vga_imageblit_expand(struct fb_info *info, const struct fb_image *image) |
| { |
| char __iomem *where = info->screen_base + (image->dx/8) + |
| image->dy * info->fix.line_length; |
| struct vga16fb_par *par = info->par; |
| char *cdat = (char *) image->data; |
| char __iomem *dst; |
| int x, y; |
| |
| switch (info->fix.type) { |
| case FB_TYPE_VGA_PLANES: |
| if (info->fix.type_aux == FB_AUX_VGA_PLANES_VGA4) { |
| if (par->isVGA) { |
| setmode(2); |
| setop(0); |
| setsr(0xf); |
| setcolor(image->fg_color); |
| selectmask(); |
| |
| setmask(0xff); |
| writeb(image->bg_color, where); |
| rmb(); |
| readb(where); /* fill latches */ |
| setmode(3); |
| wmb(); |
| for (y = 0; y < image->height; y++) { |
| dst = where; |
| for (x = image->width/8; x--;) |
| writeb(*cdat++, dst++); |
| where += info->fix.line_length; |
| } |
| wmb(); |
| } else { |
| setmode(0); |
| setop(0); |
| setsr(0xf); |
| setcolor(image->bg_color); |
| selectmask(); |
| |
| setmask(0xff); |
| for (y = 0; y < image->height; y++) { |
| dst = where; |
| for (x=image->width/8; x--;){ |
| rmw(dst); |
| setcolor(image->fg_color); |
| selectmask(); |
| if (*cdat) { |
| setmask(*cdat++); |
| rmw(dst++); |
| } |
| } |
| where += info->fix.line_length; |
| } |
| } |
| } else |
| vga_8planes_imageblit(info, image); |
| break; |
| case FB_TYPE_PACKED_PIXELS: |
| default: |
| cfb_imageblit(info, image); |
| break; |
| } |
| } |
| |
| static void vga_imageblit_color(struct fb_info *info, const struct fb_image *image) |
| { |
| /* |
| * Draw logo |
| */ |
| struct vga16fb_par *par = info->par; |
| char __iomem *where = |
| info->screen_base + image->dy * info->fix.line_length + |
| image->dx/8; |
| const char *cdat = image->data; |
| char __iomem *dst; |
| int x, y; |
| |
| switch (info->fix.type) { |
| case FB_TYPE_VGA_PLANES: |
| if (info->fix.type_aux == FB_AUX_VGA_PLANES_VGA4 && |
| par->isVGA) { |
| setsr(0xf); |
| setop(0); |
| setmode(0); |
| |
| for (y = 0; y < image->height; y++) { |
| for (x = 0; x < image->width; x++) { |
| dst = where + x/8; |
| |
| setcolor(*cdat); |
| selectmask(); |
| setmask(1 << (7 - (x % 8))); |
| fb_readb(dst); |
| fb_writeb(0, dst); |
| |
| cdat++; |
| } |
| where += info->fix.line_length; |
| } |
| } |
| break; |
| case FB_TYPE_PACKED_PIXELS: |
| cfb_imageblit(info, image); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void vga16fb_imageblit(struct fb_info *info, const struct fb_image *image) |
| { |
| if (image->depth == 1) |
| vga_imageblit_expand(info, image); |
| else |
| vga_imageblit_color(info, image); |
| } |
| |
| static void vga16fb_destroy(struct fb_info *info) |
| { |
| struct platform_device *dev = container_of(info->device, struct platform_device, dev); |
| iounmap(info->screen_base); |
| fb_dealloc_cmap(&info->cmap); |
| /* XXX unshare VGA regions */ |
| framebuffer_release(info); |
| } |
| |
| static struct fb_ops vga16fb_ops = { |
| .owner = THIS_MODULE, |
| .fb_open = vga16fb_open, |
| .fb_release = vga16fb_release, |
| .fb_destroy = vga16fb_destroy, |
| .fb_check_var = vga16fb_check_var, |
| .fb_set_par = vga16fb_set_par, |
| .fb_setcolreg = vga16fb_setcolreg, |
| .fb_pan_display = vga16fb_pan_display, |
| .fb_blank = vga16fb_blank, |
| .fb_fillrect = vga16fb_fillrect, |
| .fb_copyarea = vga16fb_copyarea, |
| .fb_imageblit = vga16fb_imageblit, |
| }; |
| |
| #ifndef MODULE |
| static int __init vga16fb_setup(char *options) |
| { |
| char *this_opt; |
| |
| if (!options || !*options) |
| return 0; |
| |
| while ((this_opt = strsep(&options, ",")) != NULL) { |
| if (!*this_opt) continue; |
| } |
| return 0; |
| } |
| #endif |
| |
| static int vga16fb_probe(struct platform_device *dev) |
| { |
| struct fb_info *info; |
| struct vga16fb_par *par; |
| int i; |
| int ret = 0; |
| |
| printk(KERN_DEBUG "vga16fb: initializing\n"); |
| info = framebuffer_alloc(sizeof(struct vga16fb_par), &dev->dev); |
| |
| if (!info) { |
| ret = -ENOMEM; |
| goto err_fb_alloc; |
| } |
| info->apertures = alloc_apertures(1); |
| if (!info->apertures) { |
| ret = -ENOMEM; |
| goto err_ioremap; |
| } |
| |
| /* XXX share VGA_FB_PHYS and I/O region with vgacon and others */ |
| info->screen_base = (void __iomem *)VGA_MAP_MEM(VGA_FB_PHYS, 0); |
| |
| if (!info->screen_base) { |
| printk(KERN_ERR "vga16fb: unable to map device\n"); |
| ret = -ENOMEM; |
| goto err_ioremap; |
| } |
| |
| printk(KERN_INFO "vga16fb: mapped to 0x%p\n", info->screen_base); |
| par = info->par; |
| |
| par->isVGA = screen_info.orig_video_isVGA; |
| par->palette_blanked = 0; |
| par->vesa_blanked = 0; |
| |
| i = par->isVGA? 6 : 2; |
| |
| vga16fb_defined.red.length = i; |
| vga16fb_defined.green.length = i; |
| vga16fb_defined.blue.length = i; |
| |
| /* name should not depend on EGA/VGA */ |
| info->fbops = &vga16fb_ops; |
| info->var = vga16fb_defined; |
| info->fix = vga16fb_fix; |
| /* supports rectangles with widths of multiples of 8 */ |
| info->pixmap.blit_x = 1 << 7 | 1 << 15 | 1 << 23 | 1 << 31; |
| info->flags = FBINFO_FLAG_DEFAULT | FBINFO_MISC_FIRMWARE | |
| FBINFO_HWACCEL_YPAN; |
| |
| i = (info->var.bits_per_pixel == 8) ? 256 : 16; |
| ret = fb_alloc_cmap(&info->cmap, i, 0); |
| if (ret) { |
| printk(KERN_ERR "vga16fb: unable to allocate colormap\n"); |
| ret = -ENOMEM; |
| goto err_alloc_cmap; |
| } |
| |
| if (vga16fb_check_var(&info->var, info)) { |
| printk(KERN_ERR "vga16fb: unable to validate variable\n"); |
| ret = -EINVAL; |
| goto err_check_var; |
| } |
| |
| vga16fb_update_fix(info); |
| |
| info->apertures->ranges[0].base = VGA_FB_PHYS; |
| info->apertures->ranges[0].size = VGA_FB_PHYS_LEN; |
| |
| if (register_framebuffer(info) < 0) { |
| printk(KERN_ERR "vga16fb: unable to register framebuffer\n"); |
| ret = -EINVAL; |
| goto err_check_var; |
| } |
| |
| printk(KERN_INFO "fb%d: %s frame buffer device\n", |
| info->node, info->fix.id); |
| platform_set_drvdata(dev, info); |
| |
| return 0; |
| |
| err_check_var: |
| fb_dealloc_cmap(&info->cmap); |
| err_alloc_cmap: |
| iounmap(info->screen_base); |
| err_ioremap: |
| framebuffer_release(info); |
| err_fb_alloc: |
| return ret; |
| } |
| |
| static int vga16fb_remove(struct platform_device *dev) |
| { |
| struct fb_info *info = platform_get_drvdata(dev); |
| |
| if (info) |
| unregister_framebuffer(info); |
| |
| return 0; |
| } |
| |
| static struct platform_driver vga16fb_driver = { |
| .probe = vga16fb_probe, |
| .remove = vga16fb_remove, |
| .driver = { |
| .name = "vga16fb", |
| }, |
| }; |
| |
| static struct platform_device *vga16fb_device; |
| |
| static int __init vga16fb_init(void) |
| { |
| int ret; |
| #ifndef MODULE |
| char *option = NULL; |
| |
| if (fb_get_options("vga16fb", &option)) |
| return -ENODEV; |
| |
| vga16fb_setup(option); |
| #endif |
| ret = platform_driver_register(&vga16fb_driver); |
| |
| if (!ret) { |
| vga16fb_device = platform_device_alloc("vga16fb", 0); |
| |
| if (vga16fb_device) |
| ret = platform_device_add(vga16fb_device); |
| else |
| ret = -ENOMEM; |
| |
| if (ret) { |
| platform_device_put(vga16fb_device); |
| platform_driver_unregister(&vga16fb_driver); |
| } |
| } |
| |
| return ret; |
| } |
| |
| static void __exit vga16fb_exit(void) |
| { |
| platform_device_unregister(vga16fb_device); |
| platform_driver_unregister(&vga16fb_driver); |
| } |
| |
| MODULE_DESCRIPTION("Legacy VGA framebuffer device driver"); |
| MODULE_LICENSE("GPL"); |
| module_init(vga16fb_init); |
| module_exit(vga16fb_exit); |
| |
| |
| /* |
| * Overrides for Emacs so that we follow Linus's tabbing style. |
| * --------------------------------------------------------------------------- |
| * Local variables: |
| * c-basic-offset: 8 |
| * End: |
| */ |
| |