| /* |
| * |
| * By Dustin McIntire (dustin@sensoria.com) (c)2001 |
| * |
| * Setup and IRQ handling code for the HD64465 companion chip. |
| * by Greg Banks <gbanks@pocketpenguins.com> |
| * Copyright (c) 2000 PocketPenguins Inc |
| * |
| * Derived from setup_hd64465.c which bore the message: |
| * Greg Banks <gbanks@pocketpenguins.com> |
| * Copyright (c) 2000 PocketPenguins Inc and |
| * Copyright (C) 2000 YAEGASHI Takeshi |
| * and setup_cqreek.c which bore message: |
| * Copyright (C) 2000 Niibe Yutaka |
| * |
| * May be copied or modified under the terms of the GNU General Public |
| * License. See linux/COPYING for more information. |
| * |
| * IRQ functions for a Hitachi Big Sur Evaluation Board. |
| * |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/sched.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/param.h> |
| #include <linux/ioport.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/irq.h> |
| #include <linux/bitops.h> |
| |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| |
| #include <asm/bigsur/io.h> |
| #include <asm/hd64465/hd64465.h> |
| #include <asm/bigsur/bigsur.h> |
| |
| //#define BIGSUR_DEBUG 3 |
| #undef BIGSUR_DEBUG |
| |
| #ifdef BIGSUR_DEBUG |
| #define DPRINTK(args...) printk(args) |
| #define DIPRINTK(n, args...) if (BIGSUR_DEBUG>(n)) printk(args) |
| #else |
| #define DPRINTK(args...) |
| #define DIPRINTK(n, args...) |
| #endif /* BIGSUR_DEBUG */ |
| |
| #ifdef CONFIG_HD64465 |
| extern int hd64465_irq_demux(int irq); |
| #endif /* CONFIG_HD64465 */ |
| |
| |
| /*===========================================================*/ |
| // Big Sur CPLD IRQ Routines |
| /*===========================================================*/ |
| |
| /* Level 1 IRQ routines */ |
| static void disable_bigsur_l1irq(unsigned int irq) |
| { |
| unsigned long flags; |
| unsigned char mask; |
| unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0; |
| unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) ); |
| |
| if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { |
| DPRINTK("Disable L1 IRQ %d\n", irq); |
| DIPRINTK(2,"disable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n", |
| mask_port, bit); |
| local_irq_save(flags); |
| |
| /* Disable IRQ - set mask bit */ |
| mask = inb(mask_port) | bit; |
| outb(mask, mask_port); |
| local_irq_restore(flags); |
| return; |
| } |
| DPRINTK("disable_bigsur_l1irq: Invalid IRQ %d\n", irq); |
| } |
| |
| static void enable_bigsur_l1irq(unsigned int irq) |
| { |
| unsigned long flags; |
| unsigned char mask; |
| unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0; |
| unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) ); |
| |
| if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { |
| DPRINTK("Enable L1 IRQ %d\n", irq); |
| DIPRINTK(2,"enable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n", |
| mask_port, bit); |
| local_irq_save(flags); |
| /* Enable L1 IRQ - clear mask bit */ |
| mask = inb(mask_port) & ~bit; |
| outb(mask, mask_port); |
| local_irq_restore(flags); |
| return; |
| } |
| DPRINTK("enable_bigsur_l1irq: Invalid IRQ %d\n", irq); |
| } |
| |
| |
| /* Level 2 irq masks and registers for L2 decoding */ |
| /* Level2 bitmasks for each level 1 IRQ */ |
| const u32 bigsur_l2irq_mask[] = |
| {0x40,0x80,0x08,0x01,0x01,0x3C,0x3E,0xFF,0x40,0x80,0x06,0x03}; |
| /* Level2 to ISR[n] map for each level 1 IRQ */ |
| const u32 bigsur_l2irq_reg[] = |
| { 2, 2, 3, 3, 1, 2, 1, 0, 1, 1, 3, 2}; |
| /* Level2 to Level 1 IRQ map */ |
| const u32 bigsur_l2_l1_map[] = |
| {7,7,7,7,7,7,7,7, 4,6,6,6,6,6,8,9, 11,11,5,5,5,5,0,1, 3,10,10,2,-1,-1,-1,-1}; |
| /* IRQ inactive level (high or low) */ |
| const u32 bigsur_l2_inactv_state[] = {0x00, 0xBE, 0xFC, 0xF7}; |
| |
| /* CPLD external status and mask registers base and offsets */ |
| static const u32 isr_base = BIGSUR_IRQ0; |
| static const u32 isr_offset = BIGSUR_IRQ0 - BIGSUR_IRQ1; |
| static const u32 imr_base = BIGSUR_IMR0; |
| static const u32 imr_offset = BIGSUR_IMR0 - BIGSUR_IMR1; |
| |
| #define REG_NUM(irq) ((irq-BIGSUR_2NDLVL_IRQ_LOW)/8 ) |
| |
| /* Level 2 IRQ routines */ |
| static void disable_bigsur_l2irq(unsigned int irq) |
| { |
| unsigned long flags; |
| unsigned char mask; |
| unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8); |
| unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset; |
| |
| if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { |
| DPRINTK("Disable L2 IRQ %d\n", irq); |
| DIPRINTK(2,"disable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n", |
| mask_port, bit); |
| local_irq_save(flags); |
| |
| /* Disable L2 IRQ - set mask bit */ |
| mask = inb(mask_port) | bit; |
| outb(mask, mask_port); |
| local_irq_restore(flags); |
| return; |
| } |
| DPRINTK("disable_bigsur_l2irq: Invalid IRQ %d\n", irq); |
| } |
| |
| static void enable_bigsur_l2irq(unsigned int irq) |
| { |
| unsigned long flags; |
| unsigned char mask; |
| unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8); |
| unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset; |
| |
| if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { |
| DPRINTK("Enable L2 IRQ %d\n", irq); |
| DIPRINTK(2,"enable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n", |
| mask_port, bit); |
| local_irq_save(flags); |
| |
| /* Enable L2 IRQ - clear mask bit */ |
| mask = inb(mask_port) & ~bit; |
| outb(mask, mask_port); |
| local_irq_restore(flags); |
| return; |
| } |
| DPRINTK("enable_bigsur_l2irq: Invalid IRQ %d\n", irq); |
| } |
| |
| static void mask_and_ack_bigsur(unsigned int irq) |
| { |
| DPRINTK("mask_and_ack_bigsur IRQ %d\n", irq); |
| if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) |
| disable_bigsur_l1irq(irq); |
| else |
| disable_bigsur_l2irq(irq); |
| } |
| |
| static void end_bigsur_irq(unsigned int irq) |
| { |
| DPRINTK("end_bigsur_irq IRQ %d\n", irq); |
| if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) { |
| if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) |
| enable_bigsur_l1irq(irq); |
| else |
| enable_bigsur_l2irq(irq); |
| } |
| } |
| |
| static unsigned int startup_bigsur_irq(unsigned int irq) |
| { |
| u8 mask; |
| u32 reg; |
| |
| DPRINTK("startup_bigsur_irq IRQ %d\n", irq); |
| |
| if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { |
| /* Enable the L1 IRQ */ |
| enable_bigsur_l1irq(irq); |
| /* Enable all L2 IRQs in this L1 IRQ */ |
| mask = ~(bigsur_l2irq_mask[irq-BIGSUR_IRQ_LOW]); |
| reg = imr_base - bigsur_l2irq_reg[irq-BIGSUR_IRQ_LOW] * imr_offset; |
| mask &= inb(reg); |
| outb(mask,reg); |
| DIPRINTK(2,"startup_bigsur_irq: IMR=0x%08x mask=0x%x\n",reg,inb(reg)); |
| } |
| else { |
| /* Enable the L2 IRQ - clear mask bit */ |
| enable_bigsur_l2irq(irq); |
| /* Enable the L1 bit masking this L2 IRQ */ |
| enable_bigsur_l1irq(bigsur_l2_l1_map[irq-BIGSUR_2NDLVL_IRQ_LOW]); |
| DIPRINTK(2,"startup_bigsur_irq: L1=%d L2=%d\n", |
| bigsur_l2_l1_map[irq-BIGSUR_2NDLVL_IRQ_LOW],irq); |
| } |
| return 0; |
| } |
| |
| static void shutdown_bigsur_irq(unsigned int irq) |
| { |
| DPRINTK("shutdown_bigsur_irq IRQ %d\n", irq); |
| if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) |
| disable_bigsur_l1irq(irq); |
| else |
| disable_bigsur_l2irq(irq); |
| } |
| |
| /* Define the IRQ structures for the L1 and L2 IRQ types */ |
| static struct hw_interrupt_type bigsur_l1irq_type = { |
| .typename = "BigSur-CPLD-Level1-IRQ", |
| .startup = startup_bigsur_irq, |
| .shutdown = shutdown_bigsur_irq, |
| .enable = enable_bigsur_l1irq, |
| .disable = disable_bigsur_l1irq, |
| .ack = mask_and_ack_bigsur, |
| .end = end_bigsur_irq |
| }; |
| |
| static struct hw_interrupt_type bigsur_l2irq_type = { |
| .typename = "BigSur-CPLD-Level2-IRQ", |
| .startup = startup_bigsur_irq, |
| .shutdown =shutdown_bigsur_irq, |
| .enable = enable_bigsur_l2irq, |
| .disable = disable_bigsur_l2irq, |
| .ack = mask_and_ack_bigsur, |
| .end = end_bigsur_irq |
| }; |
| |
| |
| static void make_bigsur_l1isr(unsigned int irq) { |
| |
| /* sanity check first */ |
| if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { |
| /* save the handler in the main description table */ |
| irq_desc[irq].handler = &bigsur_l1irq_type; |
| irq_desc[irq].status = IRQ_DISABLED; |
| irq_desc[irq].action = 0; |
| irq_desc[irq].depth = 1; |
| |
| disable_bigsur_l1irq(irq); |
| return; |
| } |
| DPRINTK("make_bigsur_l1isr: bad irq, %d\n", irq); |
| return; |
| } |
| |
| static void make_bigsur_l2isr(unsigned int irq) { |
| |
| /* sanity check first */ |
| if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { |
| /* save the handler in the main description table */ |
| irq_desc[irq].handler = &bigsur_l2irq_type; |
| irq_desc[irq].status = IRQ_DISABLED; |
| irq_desc[irq].action = 0; |
| irq_desc[irq].depth = 1; |
| |
| disable_bigsur_l2irq(irq); |
| return; |
| } |
| DPRINTK("make_bigsur_l2isr: bad irq, %d\n", irq); |
| return; |
| } |
| |
| /* The IRQ's will be decoded as follows: |
| * If a level 2 handler exists and there is an unmasked active |
| * IRQ, the 2nd level handler will be called. |
| * If a level 2 handler does not exist for the active IRQ |
| * the 1st level handler will be called. |
| */ |
| |
| int bigsur_irq_demux(int irq) |
| { |
| int dmux_irq = irq; |
| u8 mask, actv_irqs; |
| u32 reg_num; |
| |
| DIPRINTK(3,"bigsur_irq_demux, irq=%d\n", irq); |
| /* decode the 1st level IRQ */ |
| if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { |
| /* Get corresponding L2 ISR bitmask and ISR number */ |
| mask = bigsur_l2irq_mask[irq-BIGSUR_IRQ_LOW]; |
| reg_num = bigsur_l2irq_reg[irq-BIGSUR_IRQ_LOW]; |
| /* find the active IRQ's (XOR with inactive level)*/ |
| actv_irqs = inb(isr_base-reg_num*isr_offset) ^ |
| bigsur_l2_inactv_state[reg_num]; |
| /* decode active IRQ's */ |
| actv_irqs = actv_irqs & mask & ~(inb(imr_base-reg_num*imr_offset)); |
| /* if NEZ then we have an active L2 IRQ */ |
| if(actv_irqs) dmux_irq = ffz(~actv_irqs) + reg_num*8+BIGSUR_2NDLVL_IRQ_LOW; |
| /* if no 2nd level IRQ action, but has 1st level, use 1st level handler */ |
| if(!irq_desc[dmux_irq].action && irq_desc[irq].action) |
| dmux_irq = irq; |
| DIPRINTK(1,"bigsur_irq_demux: irq=%d dmux_irq=%d mask=0x%04x reg=%d\n", |
| irq, dmux_irq, mask, reg_num); |
| } |
| #ifdef CONFIG_HD64465 |
| dmux_irq = hd64465_irq_demux(dmux_irq); |
| #endif /* CONFIG_HD64465 */ |
| DIPRINTK(3,"bigsur_irq_demux, demux_irq=%d\n", dmux_irq); |
| |
| return dmux_irq; |
| } |
| |
| /*===========================================================*/ |
| // Big Sur Init Routines |
| /*===========================================================*/ |
| void __init init_bigsur_IRQ(void) |
| { |
| int i; |
| |
| if (!MACH_BIGSUR) return; |
| |
| /* Create ISR's for Big Sur CPLD IRQ's */ |
| /*==============================================================*/ |
| for(i=BIGSUR_IRQ_LOW;i<BIGSUR_IRQ_HIGH;i++) |
| make_bigsur_l1isr(i); |
| |
| printk(KERN_INFO "Big Sur CPLD L1 interrupts %d to %d.\n", |
| BIGSUR_IRQ_LOW,BIGSUR_IRQ_HIGH); |
| |
| for(i=BIGSUR_2NDLVL_IRQ_LOW;i<BIGSUR_2NDLVL_IRQ_HIGH;i++) |
| make_bigsur_l2isr(i); |
| |
| printk(KERN_INFO "Big Sur CPLD L2 interrupts %d to %d.\n", |
| BIGSUR_2NDLVL_IRQ_LOW,BIGSUR_2NDLVL_IRQ_HIGH); |
| |
| } |