ARM: dts: msm: enable ESD check feature on sdm670
Enable ESD check feature for nt35597 truly panel,
which is used as the default panel on sdm670 MTP.
Change-Id: I2e7f0c051dfec9cba723c9a70a36802b1e003d13
Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
diff --git a/arch/arm64/boot/dts/qcom/sdm670-sde-display.dtsi b/arch/arm64/boot/dts/qcom/sdm670-sde-display.dtsi
index 6404bcf..8dbd063 100644
--- a/arch/arm64/boot/dts/qcom/sdm670-sde-display.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670-sde-display.dtsi
@@ -534,6 +534,13 @@
qcom,mdss-dsi-pan-enable-dynamic-fps;
qcom,mdss-dsi-pan-fps-update =
"dfps_immediate_porch_mode_vfp";
+ qcom,esd-check-enabled;
+ qcom,mdss-dsi-panel-status-check-mode = "reg_read";
+ qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a];
+ qcom,mdss-dsi-panel-status-command-state = "dsi_hs_mode";
+ qcom,mdss-dsi-panel-status-value = <0x9c>;
+ qcom,mdss-dsi-panel-on-check-value = <0x9c>;
+ qcom,mdss-dsi-panel-status-read-length = <1>;
qcom,mdss-dsi-display-timings {
timing@0{
qcom,mdss-dsi-panel-phy-timings = [00 1c 07 07 23 21 07
@@ -551,6 +558,13 @@
qcom,ulps-enabled;
qcom,partial-update-enabled = "single_roi";
qcom,panel-roi-alignment = <720 128 720 128 1440 128>;
+ qcom,esd-check-enabled;
+ qcom,mdss-dsi-panel-status-check-mode = "reg_read";
+ qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a];
+ qcom,mdss-dsi-panel-status-command-state = "dsi_hs_mode";
+ qcom,mdss-dsi-panel-status-value = <0x9c>;
+ qcom,mdss-dsi-panel-on-check-value = <0x9c>;
+ qcom,mdss-dsi-panel-status-read-length = <1>;
qcom,mdss-dsi-display-timings {
timing@0{
qcom,mdss-dsi-panel-phy-timings = [00 1c 07 07 23 21 07
@@ -566,6 +580,13 @@
qcom,mdss-dsi-t-clk-post = <0x0b>;
qcom,mdss-dsi-t-clk-pre = <0x23>;
qcom,ulps-enabled;
+ qcom,esd-check-enabled;
+ qcom,mdss-dsi-panel-status-check-mode = "reg_read";
+ qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a];
+ qcom,mdss-dsi-panel-status-command-state = "dsi_hs_mode";
+ qcom,mdss-dsi-panel-status-value = <0x9c>;
+ qcom,mdss-dsi-panel-on-check-value = <0x9c>;
+ qcom,mdss-dsi-panel-status-read-length = <1>;
qcom,mdss-dsi-display-timings {
timing@0{
qcom,mdss-dsi-panel-phy-timings = [00 15 05 05 20 1f 05
@@ -586,6 +607,13 @@
qcom,mdss-dsi-pan-enable-dynamic-fps;
qcom,mdss-dsi-pan-fps-update =
"dfps_immediate_porch_mode_vfp";
+ qcom,esd-check-enabled;
+ qcom,mdss-dsi-panel-status-check-mode = "reg_read";
+ qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a];
+ qcom,mdss-dsi-panel-status-command-state = "dsi_hs_mode";
+ qcom,mdss-dsi-panel-status-value = <0x9c>;
+ qcom,mdss-dsi-panel-on-check-value = <0x9c>;
+ qcom,mdss-dsi-panel-status-read-length = <1>;
qcom,mdss-dsi-display-timings {
timing@0{
qcom,mdss-dsi-panel-phy-timings = [00 15 05 05 20 1f 05