ASoC: Factor out I/O for Wolfson 8 bit data 16 bit register CODECs
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/sound/soc/codecs/wm8900.c b/sound/soc/codecs/wm8900.c
index ac30899..5e9c855 100644
--- a/sound/soc/codecs/wm8900.c
+++ b/sound/soc/codecs/wm8900.c
@@ -183,111 +183,20 @@
/* Remaining registers all zero */
};
-/*
- * read wm8900 register cache
- */
-static inline unsigned int wm8900_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
-
- BUG_ON(reg >= WM8900_MAXREG);
-
- if (reg == WM8900_REG_ID)
- return 0;
-
- return cache[reg];
-}
-
-/*
- * write wm8900 register cache
- */
-static inline void wm8900_write_reg_cache(struct snd_soc_codec *codec,
- u16 reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
-
- BUG_ON(reg >= WM8900_MAXREG);
-
- cache[reg] = value;
-}
-
-/*
- * write to the WM8900 register space
- */
-static int wm8900_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[3];
-
- if (value == wm8900_read_reg_cache(codec, reg))
- return 0;
-
- /* data is
- * D15..D9 WM8900 register offset
- * D8...D0 register data
- */
- data[0] = reg;
- data[1] = value >> 8;
- data[2] = value & 0x00ff;
-
- wm8900_write_reg_cache(codec, reg, value);
- if (codec->hw_write(codec->control_data, data, 3) == 3)
- return 0;
- else
- return -EIO;
-}
-
-/*
- * Read from the wm8900.
- */
-static unsigned int wm8900_chip_read(struct snd_soc_codec *codec, u8 reg)
-{
- struct i2c_msg xfer[2];
- u16 data;
- int ret;
- struct i2c_client *client = codec->control_data;
-
- BUG_ON(reg != WM8900_REG_ID && reg != WM8900_REG_POWER1);
-
- /* Write register */
- xfer[0].addr = client->addr;
- xfer[0].flags = 0;
- xfer[0].len = 1;
- xfer[0].buf = ®
-
- /* Read data */
- xfer[1].addr = client->addr;
- xfer[1].flags = I2C_M_RD;
- xfer[1].len = 2;
- xfer[1].buf = (u8 *)&data;
-
- ret = i2c_transfer(client->adapter, xfer, 2);
- if (ret != 2) {
- printk(KERN_CRIT "i2c_transfer returned %d\n", ret);
- return 0;
- }
-
- return (data >> 8) | ((data & 0xff) << 8);
-}
-
-/*
- * Read from the WM8900 register space. Most registers can't be read
- * and are therefore supplied from cache.
- */
-static unsigned int wm8900_read(struct snd_soc_codec *codec, unsigned int reg)
+static int wm8900_volatile_register(unsigned int reg)
{
switch (reg) {
case WM8900_REG_ID:
- return wm8900_chip_read(codec, reg);
+ case WM8900_REG_POWER1:
+ return 1;
default:
- return wm8900_read_reg_cache(codec, reg);
+ return 0;
}
}
static void wm8900_reset(struct snd_soc_codec *codec)
{
- wm8900_write(codec, WM8900_REG_RESET, 0);
+ snd_soc_write(codec, WM8900_REG_RESET, 0);
memcpy(codec->reg_cache, wm8900_reg_defaults,
sizeof(codec->reg_cache));
@@ -297,14 +206,14 @@
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
- u16 hpctl1 = wm8900_read(codec, WM8900_REG_HPCTL1);
+ u16 hpctl1 = snd_soc_read(codec, WM8900_REG_HPCTL1);
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
/* Clamp headphone outputs */
hpctl1 = WM8900_REG_HPCTL1_HP_CLAMP_IP |
WM8900_REG_HPCTL1_HP_CLAMP_OP;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
break;
case SND_SOC_DAPM_POST_PMU:
@@ -313,41 +222,41 @@
hpctl1 |= WM8900_REG_HPCTL1_HP_SHORT |
WM8900_REG_HPCTL1_HP_SHORT2 |
WM8900_REG_HPCTL1_HP_IPSTAGE_ENA;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
msleep(400);
/* Enable the output stage */
hpctl1 &= ~WM8900_REG_HPCTL1_HP_CLAMP_OP;
hpctl1 |= WM8900_REG_HPCTL1_HP_OPSTAGE_ENA;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
/* Remove the shorts */
hpctl1 &= ~WM8900_REG_HPCTL1_HP_SHORT2;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
hpctl1 &= ~WM8900_REG_HPCTL1_HP_SHORT;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
break;
case SND_SOC_DAPM_PRE_PMD:
/* Short the output */
hpctl1 |= WM8900_REG_HPCTL1_HP_SHORT;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
/* Disable the output stage */
hpctl1 &= ~WM8900_REG_HPCTL1_HP_OPSTAGE_ENA;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
/* Clamp the outputs and power down input */
hpctl1 |= WM8900_REG_HPCTL1_HP_CLAMP_IP |
WM8900_REG_HPCTL1_HP_CLAMP_OP;
hpctl1 &= ~WM8900_REG_HPCTL1_HP_IPSTAGE_ENA;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
break;
case SND_SOC_DAPM_POST_PMD:
/* Disable everything */
- wm8900_write(codec, WM8900_REG_HPCTL1, 0);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, 0);
break;
default:
@@ -723,7 +632,7 @@
struct snd_soc_codec *codec = socdev->card->codec;
u16 reg;
- reg = wm8900_read(codec, WM8900_REG_AUDIO1) & ~0x60;
+ reg = snd_soc_read(codec, WM8900_REG_AUDIO1) & ~0x60;
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
@@ -741,17 +650,17 @@
return -EINVAL;
}
- wm8900_write(codec, WM8900_REG_AUDIO1, reg);
+ snd_soc_write(codec, WM8900_REG_AUDIO1, reg);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- reg = wm8900_read(codec, WM8900_REG_DACCTRL);
+ reg = snd_soc_read(codec, WM8900_REG_DACCTRL);
if (params_rate(params) <= 24000)
reg |= WM8900_REG_DACCTRL_DAC_SB_FILT;
else
reg &= ~WM8900_REG_DACCTRL_DAC_SB_FILT;
- wm8900_write(codec, WM8900_REG_DACCTRL, reg);
+ snd_soc_write(codec, WM8900_REG_DACCTRL, reg);
}
return 0;
@@ -845,18 +754,18 @@
return 0;
/* The digital side should be disabled during any change. */
- reg = wm8900_read(codec, WM8900_REG_POWER1);
- wm8900_write(codec, WM8900_REG_POWER1,
+ reg = snd_soc_read(codec, WM8900_REG_POWER1);
+ snd_soc_write(codec, WM8900_REG_POWER1,
reg & (~WM8900_REG_POWER1_FLL_ENA));
/* Disable the FLL? */
if (!freq_in || !freq_out) {
- reg = wm8900_read(codec, WM8900_REG_CLOCKING1);
- wm8900_write(codec, WM8900_REG_CLOCKING1,
+ reg = snd_soc_read(codec, WM8900_REG_CLOCKING1);
+ snd_soc_write(codec, WM8900_REG_CLOCKING1,
reg & (~WM8900_REG_CLOCKING1_MCLK_SRC));
- reg = wm8900_read(codec, WM8900_REG_FLLCTL1);
- wm8900_write(codec, WM8900_REG_FLLCTL1,
+ reg = snd_soc_read(codec, WM8900_REG_FLLCTL1);
+ snd_soc_write(codec, WM8900_REG_FLLCTL1,
reg & (~WM8900_REG_FLLCTL1_OSC_ENA));
wm8900->fll_in = freq_in;
@@ -873,33 +782,33 @@
/* The osclilator *MUST* be enabled before we enable the
* digital circuit. */
- wm8900_write(codec, WM8900_REG_FLLCTL1,
+ snd_soc_write(codec, WM8900_REG_FLLCTL1,
fll_div.fll_ratio | WM8900_REG_FLLCTL1_OSC_ENA);
- wm8900_write(codec, WM8900_REG_FLLCTL4, fll_div.n >> 5);
- wm8900_write(codec, WM8900_REG_FLLCTL5,
+ snd_soc_write(codec, WM8900_REG_FLLCTL4, fll_div.n >> 5);
+ snd_soc_write(codec, WM8900_REG_FLLCTL5,
(fll_div.fllclk_div << 6) | (fll_div.n & 0x1f));
if (fll_div.k) {
- wm8900_write(codec, WM8900_REG_FLLCTL2,
+ snd_soc_write(codec, WM8900_REG_FLLCTL2,
(fll_div.k >> 8) | 0x100);
- wm8900_write(codec, WM8900_REG_FLLCTL3, fll_div.k & 0xff);
+ snd_soc_write(codec, WM8900_REG_FLLCTL3, fll_div.k & 0xff);
} else
- wm8900_write(codec, WM8900_REG_FLLCTL2, 0);
+ snd_soc_write(codec, WM8900_REG_FLLCTL2, 0);
if (fll_div.fll_slow_lock_ref)
- wm8900_write(codec, WM8900_REG_FLLCTL6,
+ snd_soc_write(codec, WM8900_REG_FLLCTL6,
WM8900_REG_FLLCTL6_FLL_SLOW_LOCK_REF);
else
- wm8900_write(codec, WM8900_REG_FLLCTL6, 0);
+ snd_soc_write(codec, WM8900_REG_FLLCTL6, 0);
- reg = wm8900_read(codec, WM8900_REG_POWER1);
- wm8900_write(codec, WM8900_REG_POWER1,
+ reg = snd_soc_read(codec, WM8900_REG_POWER1);
+ snd_soc_write(codec, WM8900_REG_POWER1,
reg | WM8900_REG_POWER1_FLL_ENA);
reenable:
- reg = wm8900_read(codec, WM8900_REG_CLOCKING1);
- wm8900_write(codec, WM8900_REG_CLOCKING1,
+ reg = snd_soc_read(codec, WM8900_REG_CLOCKING1);
+ snd_soc_write(codec, WM8900_REG_CLOCKING1,
reg | WM8900_REG_CLOCKING1_MCLK_SRC);
return 0;
@@ -919,38 +828,38 @@
switch (div_id) {
case WM8900_BCLK_DIV:
- reg = wm8900_read(codec, WM8900_REG_CLOCKING1);
- wm8900_write(codec, WM8900_REG_CLOCKING1,
+ reg = snd_soc_read(codec, WM8900_REG_CLOCKING1);
+ snd_soc_write(codec, WM8900_REG_CLOCKING1,
div | (reg & WM8900_REG_CLOCKING1_BCLK_MASK));
break;
case WM8900_OPCLK_DIV:
- reg = wm8900_read(codec, WM8900_REG_CLOCKING1);
- wm8900_write(codec, WM8900_REG_CLOCKING1,
+ reg = snd_soc_read(codec, WM8900_REG_CLOCKING1);
+ snd_soc_write(codec, WM8900_REG_CLOCKING1,
div | (reg & WM8900_REG_CLOCKING1_OPCLK_MASK));
break;
case WM8900_DAC_LRCLK:
- reg = wm8900_read(codec, WM8900_REG_AUDIO4);
- wm8900_write(codec, WM8900_REG_AUDIO4,
+ reg = snd_soc_read(codec, WM8900_REG_AUDIO4);
+ snd_soc_write(codec, WM8900_REG_AUDIO4,
div | (reg & WM8900_LRC_MASK));
break;
case WM8900_ADC_LRCLK:
- reg = wm8900_read(codec, WM8900_REG_AUDIO3);
- wm8900_write(codec, WM8900_REG_AUDIO3,
+ reg = snd_soc_read(codec, WM8900_REG_AUDIO3);
+ snd_soc_write(codec, WM8900_REG_AUDIO3,
div | (reg & WM8900_LRC_MASK));
break;
case WM8900_DAC_CLKDIV:
- reg = wm8900_read(codec, WM8900_REG_CLOCKING2);
- wm8900_write(codec, WM8900_REG_CLOCKING2,
+ reg = snd_soc_read(codec, WM8900_REG_CLOCKING2);
+ snd_soc_write(codec, WM8900_REG_CLOCKING2,
div | (reg & WM8900_REG_CLOCKING2_DAC_CLKDIV));
break;
case WM8900_ADC_CLKDIV:
- reg = wm8900_read(codec, WM8900_REG_CLOCKING2);
- wm8900_write(codec, WM8900_REG_CLOCKING2,
+ reg = snd_soc_read(codec, WM8900_REG_CLOCKING2);
+ snd_soc_write(codec, WM8900_REG_CLOCKING2,
div | (reg & WM8900_REG_CLOCKING2_ADC_CLKDIV));
break;
case WM8900_LRCLK_MODE:
- reg = wm8900_read(codec, WM8900_REG_DACCTRL);
- wm8900_write(codec, WM8900_REG_DACCTRL,
+ reg = snd_soc_read(codec, WM8900_REG_DACCTRL);
+ snd_soc_write(codec, WM8900_REG_DACCTRL,
div | (reg & WM8900_REG_DACCTRL_AIF_LRCLKRATE));
break;
default:
@@ -967,10 +876,10 @@
struct snd_soc_codec *codec = codec_dai->codec;
unsigned int clocking1, aif1, aif3, aif4;
- clocking1 = wm8900_read(codec, WM8900_REG_CLOCKING1);
- aif1 = wm8900_read(codec, WM8900_REG_AUDIO1);
- aif3 = wm8900_read(codec, WM8900_REG_AUDIO3);
- aif4 = wm8900_read(codec, WM8900_REG_AUDIO4);
+ clocking1 = snd_soc_read(codec, WM8900_REG_CLOCKING1);
+ aif1 = snd_soc_read(codec, WM8900_REG_AUDIO1);
+ aif3 = snd_soc_read(codec, WM8900_REG_AUDIO3);
+ aif4 = snd_soc_read(codec, WM8900_REG_AUDIO4);
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
@@ -1066,10 +975,10 @@
return -EINVAL;
}
- wm8900_write(codec, WM8900_REG_CLOCKING1, clocking1);
- wm8900_write(codec, WM8900_REG_AUDIO1, aif1);
- wm8900_write(codec, WM8900_REG_AUDIO3, aif3);
- wm8900_write(codec, WM8900_REG_AUDIO4, aif4);
+ snd_soc_write(codec, WM8900_REG_CLOCKING1, clocking1);
+ snd_soc_write(codec, WM8900_REG_AUDIO1, aif1);
+ snd_soc_write(codec, WM8900_REG_AUDIO3, aif3);
+ snd_soc_write(codec, WM8900_REG_AUDIO4, aif4);
return 0;
}
@@ -1079,14 +988,14 @@
struct snd_soc_codec *codec = codec_dai->codec;
u16 reg;
- reg = wm8900_read(codec, WM8900_REG_DACCTRL);
+ reg = snd_soc_read(codec, WM8900_REG_DACCTRL);
if (mute)
reg |= WM8900_REG_DACCTRL_MUTE;
else
reg &= ~WM8900_REG_DACCTRL_MUTE;
- wm8900_write(codec, WM8900_REG_DACCTRL, reg);
+ snd_soc_write(codec, WM8900_REG_DACCTRL, reg);
return 0;
}
@@ -1135,11 +1044,11 @@
switch (level) {
case SND_SOC_BIAS_ON:
/* Enable thermal shutdown */
- reg = wm8900_read(codec, WM8900_REG_GPIO);
- wm8900_write(codec, WM8900_REG_GPIO,
+ reg = snd_soc_read(codec, WM8900_REG_GPIO);
+ snd_soc_write(codec, WM8900_REG_GPIO,
reg | WM8900_REG_GPIO_TEMP_ENA);
- reg = wm8900_read(codec, WM8900_REG_ADDCTL);
- wm8900_write(codec, WM8900_REG_ADDCTL,
+ reg = snd_soc_read(codec, WM8900_REG_ADDCTL);
+ snd_soc_write(codec, WM8900_REG_ADDCTL,
reg | WM8900_REG_ADDCTL_TEMP_SD);
break;
@@ -1150,69 +1059,69 @@
/* Charge capacitors if initial power up */
if (codec->bias_level == SND_SOC_BIAS_OFF) {
/* STARTUP_BIAS_ENA on */
- wm8900_write(codec, WM8900_REG_POWER1,
+ snd_soc_write(codec, WM8900_REG_POWER1,
WM8900_REG_POWER1_STARTUP_BIAS_ENA);
/* Startup bias mode */
- wm8900_write(codec, WM8900_REG_ADDCTL,
+ snd_soc_write(codec, WM8900_REG_ADDCTL,
WM8900_REG_ADDCTL_BIAS_SRC |
WM8900_REG_ADDCTL_VMID_SOFTST);
/* VMID 2x50k */
- wm8900_write(codec, WM8900_REG_POWER1,
+ snd_soc_write(codec, WM8900_REG_POWER1,
WM8900_REG_POWER1_STARTUP_BIAS_ENA | 0x1);
/* Allow capacitors to charge */
schedule_timeout_interruptible(msecs_to_jiffies(400));
/* Enable bias */
- wm8900_write(codec, WM8900_REG_POWER1,
+ snd_soc_write(codec, WM8900_REG_POWER1,
WM8900_REG_POWER1_STARTUP_BIAS_ENA |
WM8900_REG_POWER1_BIAS_ENA | 0x1);
- wm8900_write(codec, WM8900_REG_ADDCTL, 0);
+ snd_soc_write(codec, WM8900_REG_ADDCTL, 0);
- wm8900_write(codec, WM8900_REG_POWER1,
+ snd_soc_write(codec, WM8900_REG_POWER1,
WM8900_REG_POWER1_BIAS_ENA | 0x1);
}
- reg = wm8900_read(codec, WM8900_REG_POWER1);
- wm8900_write(codec, WM8900_REG_POWER1,
+ reg = snd_soc_read(codec, WM8900_REG_POWER1);
+ snd_soc_write(codec, WM8900_REG_POWER1,
(reg & WM8900_REG_POWER1_FLL_ENA) |
WM8900_REG_POWER1_BIAS_ENA | 0x1);
- wm8900_write(codec, WM8900_REG_POWER2,
+ snd_soc_write(codec, WM8900_REG_POWER2,
WM8900_REG_POWER2_SYSCLK_ENA);
- wm8900_write(codec, WM8900_REG_POWER3, 0);
+ snd_soc_write(codec, WM8900_REG_POWER3, 0);
break;
case SND_SOC_BIAS_OFF:
/* Startup bias enable */
- reg = wm8900_read(codec, WM8900_REG_POWER1);
- wm8900_write(codec, WM8900_REG_POWER1,
+ reg = snd_soc_read(codec, WM8900_REG_POWER1);
+ snd_soc_write(codec, WM8900_REG_POWER1,
reg & WM8900_REG_POWER1_STARTUP_BIAS_ENA);
- wm8900_write(codec, WM8900_REG_ADDCTL,
+ snd_soc_write(codec, WM8900_REG_ADDCTL,
WM8900_REG_ADDCTL_BIAS_SRC |
WM8900_REG_ADDCTL_VMID_SOFTST);
/* Discharge caps */
- wm8900_write(codec, WM8900_REG_POWER1,
+ snd_soc_write(codec, WM8900_REG_POWER1,
WM8900_REG_POWER1_STARTUP_BIAS_ENA);
schedule_timeout_interruptible(msecs_to_jiffies(500));
/* Remove clamp */
- wm8900_write(codec, WM8900_REG_HPCTL1, 0);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, 0);
/* Power down */
- wm8900_write(codec, WM8900_REG_ADDCTL, 0);
- wm8900_write(codec, WM8900_REG_POWER1, 0);
- wm8900_write(codec, WM8900_REG_POWER2, 0);
- wm8900_write(codec, WM8900_REG_POWER3, 0);
+ snd_soc_write(codec, WM8900_REG_ADDCTL, 0);
+ snd_soc_write(codec, WM8900_REG_POWER1, 0);
+ snd_soc_write(codec, WM8900_REG_POWER2, 0);
+ snd_soc_write(codec, WM8900_REG_POWER3, 0);
/* Need to let things settle before stopping the clock
* to ensure that restart works, see "Stopping the
* master clock" in the datasheet. */
schedule_timeout_interruptible(msecs_to_jiffies(1));
- wm8900_write(codec, WM8900_REG_POWER2,
+ snd_soc_write(codec, WM8900_REG_POWER2,
WM8900_REG_POWER2_SYSCLK_ENA);
break;
}
@@ -1275,7 +1184,7 @@
if (cache) {
for (i = 0; i < WM8900_MAXREG; i++)
- wm8900_write(codec, i, cache[i]);
+ snd_soc_write(codec, i, cache[i]);
kfree(cache);
} else
dev_err(&pdev->dev, "Unable to allocate register cache\n");
@@ -1308,16 +1217,20 @@
codec->name = "WM8900";
codec->owner = THIS_MODULE;
- codec->read = wm8900_read;
- codec->write = wm8900_write;
codec->dai = &wm8900_dai;
codec->num_dai = 1;
- codec->hw_write = (hw_write_t)i2c_master_send;
codec->control_data = i2c;
codec->set_bias_level = wm8900_set_bias_level;
+ codec->volatile_register = wm8900_volatile_register;
codec->dev = &i2c->dev;
- reg = wm8900_read(codec, WM8900_REG_ID);
+ ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
+ reg = snd_soc_read(codec, WM8900_REG_ID);
if (reg != 0x8900) {
dev_err(&i2c->dev, "Device is not a WM8900 - ID %x\n", reg);
ret = -ENODEV;
@@ -1325,7 +1238,7 @@
}
/* Read back from the chip */
- reg = wm8900_chip_read(codec, WM8900_REG_POWER1);
+ reg = snd_soc_read(codec, WM8900_REG_POWER1);
reg = (reg >> 12) & 0xf;
dev_info(&i2c->dev, "WM8900 revision %d\n", reg);
@@ -1335,29 +1248,29 @@
wm8900_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* Latch the volume update bits */
- wm8900_write(codec, WM8900_REG_LINVOL,
- wm8900_read(codec, WM8900_REG_LINVOL) | 0x100);
- wm8900_write(codec, WM8900_REG_RINVOL,
- wm8900_read(codec, WM8900_REG_RINVOL) | 0x100);
- wm8900_write(codec, WM8900_REG_LOUT1CTL,
- wm8900_read(codec, WM8900_REG_LOUT1CTL) | 0x100);
- wm8900_write(codec, WM8900_REG_ROUT1CTL,
- wm8900_read(codec, WM8900_REG_ROUT1CTL) | 0x100);
- wm8900_write(codec, WM8900_REG_LOUT2CTL,
- wm8900_read(codec, WM8900_REG_LOUT2CTL) | 0x100);
- wm8900_write(codec, WM8900_REG_ROUT2CTL,
- wm8900_read(codec, WM8900_REG_ROUT2CTL) | 0x100);
- wm8900_write(codec, WM8900_REG_LDAC_DV,
- wm8900_read(codec, WM8900_REG_LDAC_DV) | 0x100);
- wm8900_write(codec, WM8900_REG_RDAC_DV,
- wm8900_read(codec, WM8900_REG_RDAC_DV) | 0x100);
- wm8900_write(codec, WM8900_REG_LADC_DV,
- wm8900_read(codec, WM8900_REG_LADC_DV) | 0x100);
- wm8900_write(codec, WM8900_REG_RADC_DV,
- wm8900_read(codec, WM8900_REG_RADC_DV) | 0x100);
+ snd_soc_write(codec, WM8900_REG_LINVOL,
+ snd_soc_read(codec, WM8900_REG_LINVOL) | 0x100);
+ snd_soc_write(codec, WM8900_REG_RINVOL,
+ snd_soc_read(codec, WM8900_REG_RINVOL) | 0x100);
+ snd_soc_write(codec, WM8900_REG_LOUT1CTL,
+ snd_soc_read(codec, WM8900_REG_LOUT1CTL) | 0x100);
+ snd_soc_write(codec, WM8900_REG_ROUT1CTL,
+ snd_soc_read(codec, WM8900_REG_ROUT1CTL) | 0x100);
+ snd_soc_write(codec, WM8900_REG_LOUT2CTL,
+ snd_soc_read(codec, WM8900_REG_LOUT2CTL) | 0x100);
+ snd_soc_write(codec, WM8900_REG_ROUT2CTL,
+ snd_soc_read(codec, WM8900_REG_ROUT2CTL) | 0x100);
+ snd_soc_write(codec, WM8900_REG_LDAC_DV,
+ snd_soc_read(codec, WM8900_REG_LDAC_DV) | 0x100);
+ snd_soc_write(codec, WM8900_REG_RDAC_DV,
+ snd_soc_read(codec, WM8900_REG_RDAC_DV) | 0x100);
+ snd_soc_write(codec, WM8900_REG_LADC_DV,
+ snd_soc_read(codec, WM8900_REG_LADC_DV) | 0x100);
+ snd_soc_write(codec, WM8900_REG_RADC_DV,
+ snd_soc_read(codec, WM8900_REG_RADC_DV) | 0x100);
/* Set the DAC and mixer output bias */
- wm8900_write(codec, WM8900_REG_OUTBIASCTL, 0x81);
+ snd_soc_write(codec, WM8900_REG_OUTBIASCTL, 0x81);
wm8900_dai.dev = &i2c->dev;