arm: msm: add board file for MSM7x30 SURF and FFA
This adds a basic board file without Kconfig changes.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
new file mode 100644
index 0000000..af132eb
--- /dev/null
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -0,0 +1,196 @@
+/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/io.h>
+#include <linux/smsc911x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/setup.h>
+
+#include <mach/gpio.h>
+#include <mach/board.h>
+#include <mach/camera.h>
+#include <mach/memory.h>
+#include <mach/msm_iomap.h>
+#include <mach/msm_hsusb.h>
+#include <mach/dma.h>
+
+#include <mach/vreg.h>
+
+#include "devices.h"
+#include "timer.h"
+#include "socinfo.h"
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = 0x8A000300,
+ .end = 0x8A0003ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MSM_GPIO_TO_INT(156),
+ .end = MSM_GPIO_TO_INT(156),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_32BIT,
+};
+
+static struct resource smsc911x_resources[] = {
+ [0] = {
+ .start = 0x8D000000,
+ .end = 0x8D000100,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MSM_GPIO_TO_INT(88),
+ .end = MSM_GPIO_TO_INT(88),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smsc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_config,
+ },
+};
+
+static struct msm_gpio smsc911x_gpios[] = {
+ { GPIO_CFG(172, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr6" },
+ { GPIO_CFG(173, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr5" },
+ { GPIO_CFG(174, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr4" },
+ { GPIO_CFG(175, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr3" },
+ { GPIO_CFG(176, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr2" },
+ { GPIO_CFG(177, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr1" },
+ { GPIO_CFG(178, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr0" },
+ { GPIO_CFG(88, 2, GPIO_INPUT, GPIO_PULL_UP, GPIO_2MA), "smsc911x_irq" },
+};
+
+static void msm7x30_cfg_smsc911x(void)
+{
+ int rc;
+
+ rc = msm_gpios_request_enable(smsc911x_gpios,
+ ARRAY_SIZE(smsc911x_gpios));
+ if (rc)
+ pr_err("%s: unable to enable gpios\n", __func__);
+}
+
+static struct platform_device *devices[] __initdata = {
+ &msm_device_smd,
+ &msm_device_dmov,
+ &smc91x_device,
+ &smsc911x_device,
+ &msm_device_nand,
+ &msm_device_uart_dm1,
+};
+
+static void __init msm7x30_init_irq(void)
+{
+ msm_init_irq();
+}
+
+static void __init msm_7x30_init_nand(void)
+{
+ int rc;
+ /* Enable GPIO 86 & 115 */
+ rc = msm_gpios_request_enable(msm_nand_ebi2_cfg_data,
+ ARRAY_SIZE(msm_nand_ebi2_cfg_data));
+ if (rc)
+ printk(KERN_ERR "%s: Failed to enable GPIO 86 & 115\n",
+ __func__);
+}
+
+static void __init msm7x30_init(void)
+{
+ if (socinfo_init() < 0)
+ printk(KERN_ERR "%s: socinfo_init() failed!\n",
+ __func__);
+ msm_acpu_clock_init(&msm7x30_clock_data);
+ if (machine_is_msm7x30_surf() || machine_is_msm7x30_fluid())
+ msm7x30_cfg_smsc911x();
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ msm_7x30_init_nand();
+ buses_init();
+}
+
+static void __init msm7x30_map_io(void)
+{
+ msm_shared_ram_phys = 0x00000000;
+ msm_map_msm7x30_io();
+ msm7x30_allocate_memory_regions();
+ msm_clock_init(msm_clocks_7x30, msm_num_clocks_7x30);
+}
+
+MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
+#ifdef CONFIG_MSM_DEBUG_UART
+ .phys_io = MSM_DEBUG_UART_PHYS,
+ .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = msm7x30_map_io,
+ .init_irq = msm7x30_init_irq,
+ .init_machine = msm7x30_init,
+ .timer = &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
+#ifdef CONFIG_MSM_DEBUG_UART
+ .phys_io = MSM_DEBUG_UART_PHYS,
+ .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = msm7x30_map_io,
+ .init_irq = msm7x30_init_irq,
+ .init_machine = msm7x30_init,
+ .timer = &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
+#ifdef CONFIG_MSM_DEBUG_UART
+ .phys_io = MSM_DEBUG_UART_PHYS,
+ .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = msm7x30_map_io,
+ .init_irq = msm7x30_init_irq,
+ .init_machine = msm7x30_init,
+ .timer = &msm_timer,
+MACHINE_END