drm/i915: fix up tiling/fence reg setup on i8xx class hw
This fixes all the tiling problems with the 2d ddx. glxgears still doesn't work.
Changes:
- fix a copy&paste error in i8xx fence reg setup. It resulted in an at most a
512KB offset of the fence reg window, so was only visible sometimes.
- add tests for stride and object size constrains (also for i915 and 1965 class
hw). Userspace seems to have an of-by-one bug there, which changes the fence
size by at most 512KB due to an overflow.
- because i8xx hw is quite old (and therefore not as well-tested) I left 2 debug
WARN_ONs in the i8xx fence reg setup code to hopefully catch any further
overflows in the bit-fields. Lastly there's one small change to make the
alignment checks more consistent.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=20289
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index e0389ad..0abccb7 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1990,20 +1990,23 @@
int regnum = obj_priv->fence_reg;
uint32_t val;
uint32_t pitch_val;
+ uint32_t fence_size_bits;
- if ((obj_priv->gtt_offset & ~I915_FENCE_START_MASK) ||
+ if ((obj_priv->gtt_offset & ~I830_FENCE_START_MASK) ||
(obj_priv->gtt_offset & (obj->size - 1))) {
- WARN(1, "%s: object 0x%08x not 1M or size aligned\n",
+ WARN(1, "%s: object 0x%08x not 512K or size aligned\n",
__func__, obj_priv->gtt_offset);
return;
}
pitch_val = (obj_priv->stride / 128) - 1;
-
+ WARN_ON(pitch_val & ~0x0000000f);
val = obj_priv->gtt_offset;
if (obj_priv->tiling_mode == I915_TILING_Y)
val |= 1 << I830_FENCE_TILING_Y_SHIFT;
- val |= I830_FENCE_SIZE_BITS(obj->size);
+ fence_size_bits = I830_FENCE_SIZE_BITS(obj->size);
+ WARN_ON(fence_size_bits & ~0x00000f00);
+ val |= fence_size_bits;
val |= pitch_val << I830_FENCE_PITCH_SHIFT;
val |= I830_FENCE_REG_VALID;
@@ -2194,7 +2197,7 @@
return -EBUSY;
if (alignment == 0)
alignment = i915_gem_get_gtt_alignment(obj);
- if (alignment & (PAGE_SIZE - 1)) {
+ if (alignment & (i915_gem_get_gtt_alignment(obj) - 1)) {
DRM_ERROR("Invalid object alignment requested %u\n", alignment);
return -EINVAL;
}
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 4cce1ae..6be3f92 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -216,6 +216,22 @@
else
tile_width = 512;
+ /* check maximum stride & object size */
+ if (IS_I965G(dev)) {
+ /* i965 stores the end address of the gtt mapping in the fence
+ * reg, so dont bother to check the size */
+ if (stride / 128 > I965_FENCE_MAX_PITCH_VAL)
+ return false;
+ } else if (IS_I9XX(dev)) {
+ if (stride / tile_width > I830_FENCE_MAX_PITCH_VAL ||
+ size > (I830_FENCE_MAX_SIZE_VAL << 20))
+ return false;
+ } else {
+ if (stride / 128 > I830_FENCE_MAX_PITCH_VAL ||
+ size > (I830_FENCE_MAX_SIZE_VAL << 19))
+ return false;
+ }
+
/* 965+ just needs multiples of tile width */
if (IS_I965G(dev)) {
if (stride & (tile_width - 1))
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 377cc58..83357b0 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -190,6 +190,8 @@
#define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8)
#define I830_FENCE_PITCH_SHIFT 4
#define I830_FENCE_REG_VALID (1<<0)
+#define I830_FENCE_MAX_PITCH_VAL 0x10
+#define I830_FENCE_MAX_SIZE_VAL (1<<8)
#define I915_FENCE_START_MASK 0x0ff00000
#define I915_FENCE_SIZE_BITS(size) ((ffs((size) >> 20) - 1) << 8)
@@ -198,6 +200,7 @@
#define I965_FENCE_PITCH_SHIFT 2
#define I965_FENCE_TILING_Y_SHIFT 1
#define I965_FENCE_REG_VALID (1<<0)
+#define I965_FENCE_MAX_PITCH_VAL 0x0400
/*
* Instruction and interrupt control regs