diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/p5020ds.dts
index 069cff7..8366e2f 100644
--- a/arch/powerpc/boot/dts/p5020ds.dts
+++ b/arch/powerpc/boot/dts/p5020ds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/dts-v1/;
+/include/ "p5020si.dtsi"
 
 / {
 	model = "fsl,P5020DS";
@@ -41,292 +41,12 @@
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
 
-	aliases {
-		ccsr = &soc;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-		pci3 = &pci3;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		dma0 = &dma0;
-		dma1 = &dma1;
-		sdhc = &sdhc;
-		msi0 = &msi0;
-		msi1 = &msi1;
-		msi2 = &msi2;
-
-		crypto = &crypto;
-		sec_jr0 = &sec_jr0;
-		sec_jr1 = &sec_jr1;
-		sec_jr2 = &sec_jr2;
-		sec_jr3 = &sec_jr3;
-		rtic_a = &rtic_a;
-		rtic_b = &rtic_b;
-		rtic_c = &rtic_c;
-		rtic_d = &rtic_d;
-		sec_mon = &sec_mon;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,e5500@0 {
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu1: PowerPC,e5500@1 {
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2_1>;
-			L2_1: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-	};
-
 	memory {
 		device_type = "memory";
 	};
 
 	soc: soc@ffe000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-
-		soc-sram-error {
-			compatible = "fsl,soc-sram-error";
-			interrupts = <16 2 1 29>;
-		};
-
-		corenet-law@0 {
-			compatible = "fsl,corenet-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <32>;
-		};
-
-		memory-controller@8000 {
-			compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
-			reg = <0x8000 0x1000>;
-			interrupts = <16 2 1 23>;
-		};
-
-		memory-controller@9000 {
-			compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
-			reg = <0x9000 0x1000>;
-			interrupts = <16 2 1 22>;
-		};
-
-		cpc: l3-cache-controller@10000 {
-			compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
-			reg = <0x10000 0x1000
-			       0x11000 0x1000>;
-			interrupts = <16 2 1 27
-				      16 2 1 26>;
-		};
-
-		corenet-cf@18000 {
-			compatible = "fsl,corenet-cf";
-			reg = <0x18000 0x1000>;
-			interrupts = <16 2 1 31>;
-			fsl,ccf-num-csdids = <32>;
-			fsl,ccf-num-snoopids = <32>;
-		};
-
-		iommu@20000 {
-			compatible = "fsl,pamu-v1.0", "fsl,pamu";
-			reg = <0x20000 0x4000>;
-			interrupts = <
-				24 2 0 0
-				16 2 1 30>;
-		};
-
-		mpic: pic@40000 {
-			clock-frequency = <0>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <4>;
-			reg = <0x40000 0x40000>;
-			compatible = "fsl,mpic", "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi0: msi@41600 {
-			compatible = "fsl,mpic-msi";
-			reg = <0x41600 0x200>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0 0 0
-				0xe1 0 0 0
-				0xe2 0 0 0
-				0xe3 0 0 0
-				0xe4 0 0 0
-				0xe5 0 0 0
-				0xe6 0 0 0
-				0xe7 0 0 0>;
-		};
-
-		msi1: msi@41800 {
-			compatible = "fsl,mpic-msi";
-			reg = <0x41800 0x200>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe8 0 0 0
-				0xe9 0 0 0
-				0xea 0 0 0
-				0xeb 0 0 0
-				0xec 0 0 0
-				0xed 0 0 0
-				0xee 0 0 0
-				0xef 0 0 0>;
-		};
-
-		msi2: msi@41a00 {
-			compatible = "fsl,mpic-msi";
-			reg = <0x41a00 0x200>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xf0 0 0 0
-				0xf1 0 0 0
-				0xf2 0 0 0
-				0xf3 0 0 0
-				0xf4 0 0 0
-				0xf5 0 0 0
-				0xf6 0 0 0
-				0xf7 0 0 0>;
-		};
-
-		guts: global-utilities@e0000 {
-			compatible = "fsl,qoriq-device-config-1.0";
-			reg = <0xe0000 0xe00>;
-			fsl,has-rstcr;
-			#sleep-cells = <1>;
-			fsl,liodn-bits = <12>;
-		};
-
-		pins: global-utilities@e0e00 {
-			compatible = "fsl,qoriq-pin-control-1.0";
-			reg = <0xe0e00 0x200>;
-			#sleep-cells = <2>;
-		};
-
-		clockgen: global-utilities@e1000 {
-			compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
-			reg = <0xe1000 0x1000>;
-			clock-frequency = <0>;
-		};
-
-		rcpm: global-utilities@e2000 {
-			compatible = "fsl,qoriq-rcpm-1.0";
-			reg = <0xe2000 0x1000>;
-			#sleep-cells = <1>;
-		};
-
-		sfp: sfp@e8000 {
-			compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0";
-			reg	   = <0xe8000 0x1000>;
-		};
-
-		serdes: serdes@ea000 {
-			compatible = "fsl,p5020-serdes";
-			reg	   = <0xea000 0x1000>;
-		};
-
-		dma0: dma@100300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p5020-dma", "fsl,eloplus-dma";
-			reg = <0x100300 0x4>;
-			ranges = <0x0 0x100100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,p5020-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupts = <28 2 0 0>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,p5020-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupts = <29 2 0 0>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,p5020-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupts = <30 2 0 0>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,p5020-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupts = <31 2 0 0>;
-			};
-		};
-
-		dma1: dma@101300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p5020-dma", "fsl,eloplus-dma";
-			reg = <0x101300 0x4>;
-			ranges = <0x0 0x101100 0x200>;
-			cell-index = <1>;
-			dma-channel@0 {
-				compatible = "fsl,p5020-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupts = <32 2 0 0>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,p5020-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupts = <33 2 0 0>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,p5020-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupts = <34 2 0 0>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,p5020-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupts = <35 2 0 0>;
-			};
-		};
-
 		spi@110000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,p5020-espi", "fsl,mpc8536-espi";
-			reg = <0x110000 0x1000>;
-			interrupts = <53 0x2 0 0>;
-			fsl,espi-num-chipselects = <4>;
-
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -355,32 +75,7 @@
 			};
 		};
 
-		sdhc: sdhc@114000 {
-			compatible = "fsl,p5020-esdhc", "fsl,esdhc";
-			reg = <0x114000 0x1000>;
-			interrupts = <48 2 0 0>;
-			sdhci,auto-cmd12;
-			clock-frequency = <0>;
-		};
-
-		i2c@118000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x118000 0x100>;
-			interrupts = <38 2 0 0>;
-			dfsrr;
-		};
-
 		i2c@118100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x118100 0x100>;
-			interrupts = <38 2 0 0>;
-			dfsrr;
 			eeprom@51 {
 				compatible = "at24,24c256";
 				reg = <0x51>;
@@ -391,193 +86,17 @@
 			};
 		};
 
-		i2c@119000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <2>;
-			compatible = "fsl-i2c";
-			reg = <0x119000 0x100>;
-			interrupts = <39 2 0 0>;
-			dfsrr;
-		};
-
 		i2c@119100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <3>;
-			compatible = "fsl-i2c";
-			reg = <0x119100 0x100>;
-			interrupts = <39 2 0 0>;
-			dfsrr;
 			rtc@68 {
 				compatible = "dallas,ds3232";
 				reg = <0x68>;
 				interrupts = <0x1 0x1 0 0>;
 			};
 		};
-
-		serial0: serial@11c500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11c500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <36 2 0 0>;
-		};
-
-		serial1: serial@11c600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11c600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <36 2 0 0>;
-		};
-
-		serial2: serial@11d500 {
-			cell-index = <2>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11d500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <37 2 0 0>;
-		};
-
-		serial3: serial@11d600 {
-			cell-index = <3>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11d600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <37 2 0 0>;
-		};
-
-		gpio0: gpio@130000 {
-			compatible = "fsl,p5020-gpio", "fsl,qoriq-gpio";
-			reg = <0x130000 0x1000>;
-			interrupts = <55 2 0 0>;
-			#gpio-cells = <2>;
-			gpio-controller;
-		};
-
-		usb0: usb@210000 {
-			compatible = "fsl,p5020-usb2-mph",
-					"fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
-			reg = <0x210000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <44 0x2 0 0>;
-			phy_type = "utmi";
-			port0;
-		};
-
-		usb1: usb@211000 {
-			compatible = "fsl,p5020-usb2-dr",
-					"fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
-			reg = <0x211000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <45 0x2 0 0>;
-			dr_mode = "host";
-			phy_type = "utmi";
-		};
-
-		sata@220000 {
-			compatible = "fsl,p5020-sata", "fsl,pq-sata-v2";
-			reg = <0x220000 0x1000>;
-			interrupts = <68 0x2 0 0>;
-		};
-
-		sata@221000 {
-			compatible = "fsl,p5020-sata", "fsl,pq-sata-v2";
-			reg = <0x221000 0x1000>;
-			interrupts = <69 0x2 0 0>;
-		};
-
-		crypto: crypto@300000 {
-			compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg		 = <0x300000 0x10000>;
-			ranges		 = <0 0x300000 0x10000>;
-			interrupts	 = <92 2 0 0>;
-
-			sec_jr0: jr@1000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
-				reg = <0x1000 0x1000>;
-				interrupts = <88 2 0 0>;
-			};
-
-			sec_jr1: jr@2000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
-				reg = <0x2000 0x1000>;
-				interrupts = <89 2 0 0>;
-			};
-
-			sec_jr2: jr@3000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
-				reg = <0x3000 0x1000>;
-				interrupts = <90 2 0 0>;
-			};
-
-			sec_jr3: jr@4000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
-				reg = <0x4000 0x1000>;
-				interrupts = <91 2 0 0>;
-			};
-
-			rtic@6000 {
-				compatible = "fsl,sec-v4.2-rtic",
-					     "fsl,sec-v4.0-rtic";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x6000 0x100>;
-				ranges = <0x0 0x6100 0xe00>;
-
-				rtic_a: rtic-a@0 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
-					reg = <0x00 0x20 0x100 0x80>;
-				};
-
-				rtic_b: rtic-b@20 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
-					reg = <0x20 0x20 0x200 0x80>;
-				};
-
-				rtic_c: rtic-c@40 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
-					reg = <0x40 0x20 0x300 0x80>;
-				};
-
-				rtic_d: rtic-d@60 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
-					reg = <0x60 0x20 0x500 0x80>;
-				};
-			};
-		};
-
-		sec_mon: sec_mon@314000 {
-			compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
-			reg = <0x314000 0x1000>;
-			interrupts = <93 2 0 0>;
-		};
 	};
 
 	localbus@ffe124000 {
-		compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus";
 		reg = <0xf 0xfe124000 0 0x1000>;
-		interrupts = <25 2 0 0>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-
 		ranges = <0 0 0xf 0xe8000000 0x08000000
 			  2 0 0xf 0xffa00000 0x00040000
 			  3 0 0xf 0xffdf0000 0x00008000>;
@@ -634,33 +153,11 @@
 	};
 
 	pci0: pcie@ffe200000 {
-		compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0xf 0xfe200000 0 0x1000>;
-		bus-range = <0x0 0xff>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-		clock-frequency = <0x1fca055>;
-		fsl,msi = <&msi0>;
-		interrupts = <16 2 1 15>;
 
 		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 1 15>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 40 1 0 0
-				0000 0 0 2 &mpic 1 1 0 0
-				0000 0 0 3 &mpic 2 1 0 0
-				0000 0 0 4 &mpic 3 1 0 0
-				>;
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
 				  0 0x20000000
@@ -672,32 +169,10 @@
 	};
 
 	pci1: pcie@ffe201000 {
-		compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0xf 0xfe201000 0 0x1000>;
-		bus-range = <0 0xff>;
 		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
-		clock-frequency = <0x1fca055>;
-		fsl,msi = <&msi1>;
-		interrupts = <16 2 1 14>;
 		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 1 14>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 41 1 0 0
-				0000 0 0 2 &mpic 5 1 0 0
-				0000 0 0 3 &mpic 6 1 0 0
-				0000 0 0 4 &mpic 7 1 0 0
-				>;
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
 				  0 0x20000000
@@ -709,32 +184,10 @@
 	};
 
 	pci2: pcie@ffe202000 {
-		compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0xf 0xfe202000 0 0x1000>;
-		bus-range = <0x0 0xff>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
-		clock-frequency = <0x1fca055>;
-		fsl,msi = <&msi2>;
-		interrupts = <16 2 1 13>;
 		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 1 13>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 42 1 0 0
-				0000 0 0 2 &mpic 9 1 0 0
-				0000 0 0 3 &mpic 10 1 0 0
-				0000 0 0 4 &mpic 11 1 0 0
-				>;
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
 				  0 0x20000000
@@ -746,32 +199,10 @@
 	};
 
 	pci3: pcie@ffe203000 {
-		compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0xf 0xfe203000 0 0x1000>;
-		bus-range = <0x0 0xff>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
-		clock-frequency = <0x1fca055>;
-		fsl,msi = <&msi2>;
-		interrupts = <16 2 1 12>;
 		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 1 12>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 43 1 0 0
-				0000 0 0 2 &mpic 0 1 0 0
-				0000 0 0 3 &mpic 4 1 0 0
-				0000 0 0 4 &mpic 8 1 0 0
-				>;
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
 				  0 0x20000000
diff --git a/arch/powerpc/boot/dts/p5020si.dtsi b/arch/powerpc/boot/dts/p5020si.dtsi
new file mode 100644
index 0000000..5e6048e
--- /dev/null
+++ b/arch/powerpc/boot/dts/p5020si.dtsi
@@ -0,0 +1,652 @@
+/*
+ * P5020 Silicon Device Tree Source
+ *
+ * Copyright 2010-2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,P5020";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+		msi0 = &msi0;
+		msi1 = &msi1;
+		msi2 = &msi2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+		sec_mon = &sec_mon;
+
+/*
+		rio0 = &rapidio0;
+ */
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e5500@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e5500@1 {
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+
+	soc: soc@ffe000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		soc-sram-error {
+			compatible = "fsl,soc-sram-error";
+			interrupts = <16 2 1 29>;
+		};
+
+		corenet-law@0 {
+			compatible = "fsl,corenet-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <32>;
+		};
+
+		memory-controller@8000 {
+			compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+			reg = <0x8000 0x1000>;
+			interrupts = <16 2 1 23>;
+		};
+
+		memory-controller@9000 {
+			compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+			reg = <0x9000 0x1000>;
+			interrupts = <16 2 1 22>;
+		};
+
+		cpc: l3-cache-controller@10000 {
+			compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+			reg = <0x10000 0x1000
+			       0x11000 0x1000>;
+			interrupts = <16 2 1 27
+				      16 2 1 26>;
+		};
+
+		corenet-cf@18000 {
+			compatible = "fsl,corenet-cf";
+			reg = <0x18000 0x1000>;
+			interrupts = <16 2 1 31>;
+			fsl,ccf-num-csdids = <32>;
+			fsl,ccf-num-snoopids = <32>;
+		};
+
+		iommu@20000 {
+			compatible = "fsl,pamu-v1.0", "fsl,pamu";
+			reg = <0x20000 0x4000>;
+			interrupts = <
+				24 2 0 0
+				16 2 1 30>;
+		};
+
+		mpic: pic@40000 {
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <4>;
+			reg = <0x40000 0x40000>;
+			compatible = "fsl,mpic", "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi0: msi@41600 {
+			compatible = "fsl,mpic-msi";
+			reg = <0x41600 0x200>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0 0 0
+				0xe1 0 0 0
+				0xe2 0 0 0
+				0xe3 0 0 0
+				0xe4 0 0 0
+				0xe5 0 0 0
+				0xe6 0 0 0
+				0xe7 0 0 0>;
+		};
+
+		msi1: msi@41800 {
+			compatible = "fsl,mpic-msi";
+			reg = <0x41800 0x200>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe8 0 0 0
+				0xe9 0 0 0
+				0xea 0 0 0
+				0xeb 0 0 0
+				0xec 0 0 0
+				0xed 0 0 0
+				0xee 0 0 0
+				0xef 0 0 0>;
+		};
+
+		msi2: msi@41a00 {
+			compatible = "fsl,mpic-msi";
+			reg = <0x41a00 0x200>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xf0 0 0 0
+				0xf1 0 0 0
+				0xf2 0 0 0
+				0xf3 0 0 0
+				0xf4 0 0 0
+				0xf5 0 0 0
+				0xf6 0 0 0
+				0xf7 0 0 0>;
+		};
+
+		guts: global-utilities@e0000 {
+			compatible = "fsl,qoriq-device-config-1.0";
+			reg = <0xe0000 0xe00>;
+			fsl,has-rstcr;
+			#sleep-cells = <1>;
+			fsl,liodn-bits = <12>;
+		};
+
+		pins: global-utilities@e0e00 {
+			compatible = "fsl,qoriq-pin-control-1.0";
+			reg = <0xe0e00 0x200>;
+			#sleep-cells = <2>;
+		};
+
+		clockgen: global-utilities@e1000 {
+			compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+			reg = <0xe1000 0x1000>;
+			clock-frequency = <0>;
+		};
+
+		rcpm: global-utilities@e2000 {
+			compatible = "fsl,qoriq-rcpm-1.0";
+			reg = <0xe2000 0x1000>;
+			#sleep-cells = <1>;
+		};
+
+		sfp: sfp@e8000 {
+			compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0";
+			reg	   = <0xe8000 0x1000>;
+		};
+
+		serdes: serdes@ea000 {
+			compatible = "fsl,p5020-serdes";
+			reg	   = <0xea000 0x1000>;
+		};
+
+		dma0: dma@100300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p5020-dma", "fsl,eloplus-dma";
+			reg = <0x100300 0x4>;
+			ranges = <0x0 0x100100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,p5020-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupts = <28 2 0 0>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,p5020-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupts = <29 2 0 0>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,p5020-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupts = <30 2 0 0>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,p5020-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupts = <31 2 0 0>;
+			};
+		};
+
+		dma1: dma@101300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p5020-dma", "fsl,eloplus-dma";
+			reg = <0x101300 0x4>;
+			ranges = <0x0 0x101100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,p5020-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupts = <32 2 0 0>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,p5020-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupts = <33 2 0 0>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,p5020-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupts = <34 2 0 0>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,p5020-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupts = <35 2 0 0>;
+			};
+		};
+
+		spi@110000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,p5020-espi", "fsl,mpc8536-espi";
+			reg = <0x110000 0x1000>;
+			interrupts = <53 0x2 0 0>;
+			fsl,espi-num-chipselects = <4>;
+		};
+
+		sdhc: sdhc@114000 {
+			compatible = "fsl,p5020-esdhc", "fsl,esdhc";
+			reg = <0x114000 0x1000>;
+			interrupts = <48 2 0 0>;
+			sdhci,auto-cmd12;
+			clock-frequency = <0>;
+		};
+
+		i2c@118000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x118000 0x100>;
+			interrupts = <38 2 0 0>;
+			dfsrr;
+		};
+
+		i2c@118100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x118100 0x100>;
+			interrupts = <38 2 0 0>;
+			dfsrr;
+		};
+
+		i2c@119000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <2>;
+			compatible = "fsl-i2c";
+			reg = <0x119000 0x100>;
+			interrupts = <39 2 0 0>;
+			dfsrr;
+		};
+
+		i2c@119100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <3>;
+			compatible = "fsl-i2c";
+			reg = <0x119100 0x100>;
+			interrupts = <39 2 0 0>;
+			dfsrr;
+		};
+
+		serial0: serial@11c500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x11c500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <36 2 0 0>;
+		};
+
+		serial1: serial@11c600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x11c600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <36 2 0 0>;
+		};
+
+		serial2: serial@11d500 {
+			cell-index = <2>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x11d500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <37 2 0 0>;
+		};
+
+		serial3: serial@11d600 {
+			cell-index = <3>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x11d600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <37 2 0 0>;
+		};
+
+		gpio0: gpio@130000 {
+			compatible = "fsl,p5020-gpio", "fsl,qoriq-gpio";
+			reg = <0x130000 0x1000>;
+			interrupts = <55 2 0 0>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		usb0: usb@210000 {
+			compatible = "fsl,p5020-usb2-mph",
+					"fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+			reg = <0x210000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <44 0x2 0 0>;
+			phy_type = "utmi";
+			port0;
+		};
+
+		usb1: usb@211000 {
+			compatible = "fsl,p5020-usb2-dr",
+					"fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+			reg = <0x211000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <45 0x2 0 0>;
+			dr_mode = "host";
+			phy_type = "utmi";
+		};
+
+		sata@220000 {
+			compatible = "fsl,p5020-sata", "fsl,pq-sata-v2";
+			reg = <0x220000 0x1000>;
+			interrupts = <68 0x2 0 0>;
+		};
+
+		sata@221000 {
+			compatible = "fsl,p5020-sata", "fsl,pq-sata-v2";
+			reg = <0x221000 0x1000>;
+			interrupts = <69 0x2 0 0>;
+		};
+
+		crypto: crypto@300000 {
+			compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg		 = <0x300000 0x10000>;
+			ranges		 = <0 0x300000 0x10000>;
+			interrupts	 = <92 2 0 0>;
+
+			sec_jr0: jr@1000 {
+				compatible = "fsl,sec-v4.2-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x1000 0x1000>;
+				interrupts = <88 2 0 0>;
+			};
+
+			sec_jr1: jr@2000 {
+				compatible = "fsl,sec-v4.2-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x2000 0x1000>;
+				interrupts = <89 2 0 0>;
+			};
+
+			sec_jr2: jr@3000 {
+				compatible = "fsl,sec-v4.2-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x3000 0x1000>;
+				interrupts = <90 2 0 0>;
+			};
+
+			sec_jr3: jr@4000 {
+				compatible = "fsl,sec-v4.2-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x4000 0x1000>;
+				interrupts = <91 2 0 0>;
+			};
+
+			rtic@6000 {
+				compatible = "fsl,sec-v4.2-rtic",
+					     "fsl,sec-v4.0-rtic";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x6000 0x100>;
+				ranges = <0x0 0x6100 0xe00>;
+
+				rtic_a: rtic-a@0 {
+					compatible = "fsl,sec-v4.2-rtic-memory",
+						     "fsl,sec-v4.0-rtic-memory";
+					reg = <0x00 0x20 0x100 0x80>;
+				};
+
+				rtic_b: rtic-b@20 {
+					compatible = "fsl,sec-v4.2-rtic-memory",
+						     "fsl,sec-v4.0-rtic-memory";
+					reg = <0x20 0x20 0x200 0x80>;
+				};
+
+				rtic_c: rtic-c@40 {
+					compatible = "fsl,sec-v4.2-rtic-memory",
+						     "fsl,sec-v4.0-rtic-memory";
+					reg = <0x40 0x20 0x300 0x80>;
+				};
+
+				rtic_d: rtic-d@60 {
+					compatible = "fsl,sec-v4.2-rtic-memory",
+						     "fsl,sec-v4.0-rtic-memory";
+					reg = <0x60 0x20 0x500 0x80>;
+				};
+			};
+		};
+
+		sec_mon: sec_mon@314000 {
+			compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
+			reg = <0x314000 0x1000>;
+			interrupts = <93 2 0 0>;
+		};
+	};
+
+/*
+	rapidio0: rapidio@ffe0c0000
+*/
+
+	localbus@ffe124000 {
+		compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus";
+		interrupts = <25 2 0 0>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+	};
+
+	pci0: pcie@ffe200000 {
+		compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+		device_type = "pci";
+		#size-cells = <2>;
+		#address-cells = <3>;
+		bus-range = <0x0 0xff>;
+		clock-frequency = <0x1fca055>;
+		fsl,msi = <&msi0>;
+		interrupts = <16 2 1 15>;
+
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			interrupts = <16 2 1 15>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x0 */
+				0000 0 0 1 &mpic 40 1 0 0
+				0000 0 0 2 &mpic 1 1 0 0
+				0000 0 0 3 &mpic 2 1 0 0
+				0000 0 0 4 &mpic 3 1 0 0
+				>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+		device_type = "pci";
+		#size-cells = <2>;
+		#address-cells = <3>;
+		bus-range = <0 0xff>;
+		clock-frequency = <0x1fca055>;
+		fsl,msi = <&msi1>;
+		interrupts = <16 2 1 14>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			interrupts = <16 2 1 14>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x0 */
+				0000 0 0 1 &mpic 41 1 0 0
+				0000 0 0 2 &mpic 5 1 0 0
+				0000 0 0 3 &mpic 6 1 0 0
+				0000 0 0 4 &mpic 7 1 0 0
+				>;
+		};
+	};
+
+	pci2: pcie@ffe202000 {
+		compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+		device_type = "pci";
+		#size-cells = <2>;
+		#address-cells = <3>;
+		bus-range = <0x0 0xff>;
+		clock-frequency = <0x1fca055>;
+		fsl,msi = <&msi2>;
+		interrupts = <16 2 1 13>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			interrupts = <16 2 1 13>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x0 */
+				0000 0 0 1 &mpic 42 1 0 0
+				0000 0 0 2 &mpic 9 1 0 0
+				0000 0 0 3 &mpic 10 1 0 0
+				0000 0 0 4 &mpic 11 1 0 0
+				>;
+		};
+	};
+
+	pci3: pcie@ffe203000 {
+		compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+		device_type = "pci";
+		#size-cells = <2>;
+		#address-cells = <3>;
+		bus-range = <0x0 0xff>;
+		clock-frequency = <0x1fca055>;
+		fsl,msi = <&msi2>;
+		interrupts = <16 2 1 12>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			interrupts = <16 2 1 12>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x0 */
+				0000 0 0 1 &mpic 43 1 0 0
+				0000 0 0 2 &mpic 0 1 0 0
+				0000 0 0 3 &mpic 4 1 0 0
+				0000 0 0 4 &mpic 8 1 0 0
+				>;
+		};
+	};
+};