| /* |
| * vsp1_wpf.c -- R-Car VSP1 Write Pixel Formatter |
| * |
| * Copyright (C) 2013-2014 Renesas Electronics Corporation |
| * |
| * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/device.h> |
| |
| #include <media/v4l2-subdev.h> |
| |
| #include "vsp1.h" |
| #include "vsp1_dl.h" |
| #include "vsp1_pipe.h" |
| #include "vsp1_rwpf.h" |
| #include "vsp1_video.h" |
| |
| #define WPF_GEN2_MAX_WIDTH 2048U |
| #define WPF_GEN2_MAX_HEIGHT 2048U |
| #define WPF_GEN3_MAX_WIDTH 8190U |
| #define WPF_GEN3_MAX_HEIGHT 8190U |
| |
| /* ----------------------------------------------------------------------------- |
| * Device Access |
| */ |
| |
| static inline void vsp1_wpf_write(struct vsp1_rwpf *wpf, |
| struct vsp1_dl_list *dl, u32 reg, u32 data) |
| { |
| vsp1_dl_list_write(dl, reg + wpf->entity.index * VI6_WPF_OFFSET, data); |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Controls |
| */ |
| |
| enum wpf_flip_ctrl { |
| WPF_CTRL_VFLIP = 0, |
| WPF_CTRL_HFLIP = 1, |
| WPF_CTRL_MAX, |
| }; |
| |
| static int vsp1_wpf_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct vsp1_rwpf *wpf = |
| container_of(ctrl->handler, struct vsp1_rwpf, ctrls); |
| unsigned int i; |
| u32 flip = 0; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_HFLIP: |
| case V4L2_CID_VFLIP: |
| for (i = 0; i < WPF_CTRL_MAX; ++i) { |
| if (wpf->flip.ctrls[i]) |
| flip |= wpf->flip.ctrls[i]->val ? BIT(i) : 0; |
| } |
| |
| spin_lock_irq(&wpf->flip.lock); |
| wpf->flip.pending = flip; |
| spin_unlock_irq(&wpf->flip.lock); |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static const struct v4l2_ctrl_ops vsp1_wpf_ctrl_ops = { |
| .s_ctrl = vsp1_wpf_s_ctrl, |
| }; |
| |
| static int wpf_init_controls(struct vsp1_rwpf *wpf) |
| { |
| struct vsp1_device *vsp1 = wpf->entity.vsp1; |
| unsigned int num_flip_ctrls; |
| |
| spin_lock_init(&wpf->flip.lock); |
| |
| if (wpf->entity.index != 0) { |
| /* Only WPF0 supports flipping. */ |
| num_flip_ctrls = 0; |
| } else if (vsp1->info->features & VSP1_HAS_WPF_HFLIP) { |
| /* When horizontal flip is supported the WPF implements two |
| * controls (horizontal flip and vertical flip). |
| */ |
| num_flip_ctrls = 2; |
| } else if (vsp1->info->features & VSP1_HAS_WPF_VFLIP) { |
| /* When only vertical flip is supported the WPF implements a |
| * single control (vertical flip). |
| */ |
| num_flip_ctrls = 1; |
| } else { |
| /* Otherwise flipping is not supported. */ |
| num_flip_ctrls = 0; |
| } |
| |
| vsp1_rwpf_init_ctrls(wpf, num_flip_ctrls); |
| |
| if (num_flip_ctrls >= 1) { |
| wpf->flip.ctrls[WPF_CTRL_VFLIP] = |
| v4l2_ctrl_new_std(&wpf->ctrls, &vsp1_wpf_ctrl_ops, |
| V4L2_CID_VFLIP, 0, 1, 1, 0); |
| } |
| |
| if (num_flip_ctrls == 2) { |
| wpf->flip.ctrls[WPF_CTRL_HFLIP] = |
| v4l2_ctrl_new_std(&wpf->ctrls, &vsp1_wpf_ctrl_ops, |
| V4L2_CID_HFLIP, 0, 1, 1, 0); |
| |
| v4l2_ctrl_cluster(2, wpf->flip.ctrls); |
| } |
| |
| if (wpf->ctrls.error) { |
| dev_err(vsp1->dev, "wpf%u: failed to initialize controls\n", |
| wpf->entity.index); |
| return wpf->ctrls.error; |
| } |
| |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * V4L2 Subdevice Core Operations |
| */ |
| |
| static int wpf_s_stream(struct v4l2_subdev *subdev, int enable) |
| { |
| struct vsp1_rwpf *wpf = to_rwpf(subdev); |
| struct vsp1_device *vsp1 = wpf->entity.vsp1; |
| |
| if (enable) |
| return 0; |
| |
| /* Write to registers directly when stopping the stream as there will be |
| * no pipeline run to apply the display list. |
| */ |
| vsp1_write(vsp1, VI6_WPF_IRQ_ENB(wpf->entity.index), 0); |
| vsp1_write(vsp1, wpf->entity.index * VI6_WPF_OFFSET + |
| VI6_WPF_SRCRPF, 0); |
| |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * V4L2 Subdevice Operations |
| */ |
| |
| static const struct v4l2_subdev_video_ops wpf_video_ops = { |
| .s_stream = wpf_s_stream, |
| }; |
| |
| static const struct v4l2_subdev_ops wpf_ops = { |
| .video = &wpf_video_ops, |
| .pad = &vsp1_rwpf_pad_ops, |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * VSP1 Entity Operations |
| */ |
| |
| static void vsp1_wpf_destroy(struct vsp1_entity *entity) |
| { |
| struct vsp1_rwpf *wpf = entity_to_rwpf(entity); |
| |
| vsp1_dlm_destroy(wpf->dlm); |
| } |
| |
| static void wpf_configure(struct vsp1_entity *entity, |
| struct vsp1_pipeline *pipe, |
| struct vsp1_dl_list *dl, |
| enum vsp1_entity_params params) |
| { |
| struct vsp1_rwpf *wpf = to_rwpf(&entity->subdev); |
| struct vsp1_device *vsp1 = wpf->entity.vsp1; |
| const struct v4l2_mbus_framefmt *source_format; |
| const struct v4l2_mbus_framefmt *sink_format; |
| unsigned int i; |
| u32 outfmt = 0; |
| u32 srcrpf = 0; |
| |
| if (params == VSP1_ENTITY_PARAMS_RUNTIME) { |
| const unsigned int mask = BIT(WPF_CTRL_VFLIP) |
| | BIT(WPF_CTRL_HFLIP); |
| |
| spin_lock(&wpf->flip.lock); |
| wpf->flip.active = (wpf->flip.active & ~mask) |
| | (wpf->flip.pending & mask); |
| spin_unlock(&wpf->flip.lock); |
| |
| outfmt = (wpf->alpha << VI6_WPF_OUTFMT_PDV_SHIFT) | wpf->outfmt; |
| |
| if (wpf->flip.active & BIT(WPF_CTRL_VFLIP)) |
| outfmt |= VI6_WPF_OUTFMT_FLP; |
| if (wpf->flip.active & BIT(WPF_CTRL_HFLIP)) |
| outfmt |= VI6_WPF_OUTFMT_HFLP; |
| |
| vsp1_wpf_write(wpf, dl, VI6_WPF_OUTFMT, outfmt); |
| return; |
| } |
| |
| sink_format = vsp1_entity_get_pad_format(&wpf->entity, |
| wpf->entity.config, |
| RWPF_PAD_SINK); |
| source_format = vsp1_entity_get_pad_format(&wpf->entity, |
| wpf->entity.config, |
| RWPF_PAD_SOURCE); |
| |
| if (params == VSP1_ENTITY_PARAMS_PARTITION) { |
| const struct v4l2_pix_format_mplane *format = &wpf->format; |
| struct vsp1_rwpf_memory mem = wpf->mem; |
| unsigned int flip = wpf->flip.active; |
| unsigned int width = source_format->width; |
| unsigned int height = source_format->height; |
| unsigned int offset; |
| |
| /* Cropping. The partition algorithm can split the image into |
| * multiple slices. |
| */ |
| vsp1_wpf_write(wpf, dl, VI6_WPF_HSZCLIP, VI6_WPF_SZCLIP_EN | |
| (0 << VI6_WPF_SZCLIP_OFST_SHIFT) | |
| (width << VI6_WPF_SZCLIP_SIZE_SHIFT)); |
| vsp1_wpf_write(wpf, dl, VI6_WPF_VSZCLIP, VI6_WPF_SZCLIP_EN | |
| (0 << VI6_WPF_SZCLIP_OFST_SHIFT) | |
| (height << VI6_WPF_SZCLIP_SIZE_SHIFT)); |
| |
| if (pipe->lif) |
| return; |
| |
| /* Update the memory offsets based on flipping configuration. |
| * The destination addresses point to the locations where the |
| * VSP starts writing to memory, which can be different corners |
| * of the image depending on vertical flipping. Horizontal |
| * flipping is handled through a line buffer and doesn't modify |
| * the start address. |
| */ |
| if (flip & BIT(WPF_CTRL_VFLIP)) { |
| mem.addr[0] += (format->height - 1) |
| * format->plane_fmt[0].bytesperline; |
| |
| if (format->num_planes > 1) { |
| offset = (format->height / wpf->fmtinfo->vsub - 1) |
| * format->plane_fmt[1].bytesperline; |
| mem.addr[1] += offset; |
| mem.addr[2] += offset; |
| } |
| } |
| |
| vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_Y, mem.addr[0]); |
| vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_C0, mem.addr[1]); |
| vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_C1, mem.addr[2]); |
| return; |
| } |
| |
| /* Format */ |
| if (!pipe->lif) { |
| const struct v4l2_pix_format_mplane *format = &wpf->format; |
| const struct vsp1_format_info *fmtinfo = wpf->fmtinfo; |
| |
| outfmt = fmtinfo->hwfmt << VI6_WPF_OUTFMT_WRFMT_SHIFT; |
| |
| if (fmtinfo->alpha) |
| outfmt |= VI6_WPF_OUTFMT_PXA; |
| if (fmtinfo->swap_yc) |
| outfmt |= VI6_WPF_OUTFMT_SPYCS; |
| if (fmtinfo->swap_uv) |
| outfmt |= VI6_WPF_OUTFMT_SPUVS; |
| |
| /* Destination stride and byte swapping. */ |
| vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_STRIDE_Y, |
| format->plane_fmt[0].bytesperline); |
| if (format->num_planes > 1) |
| vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_STRIDE_C, |
| format->plane_fmt[1].bytesperline); |
| |
| vsp1_wpf_write(wpf, dl, VI6_WPF_DSWAP, fmtinfo->swap); |
| |
| if (vsp1->info->features & VSP1_HAS_WPF_HFLIP && |
| wpf->entity.index == 0) |
| vsp1_wpf_write(wpf, dl, VI6_WPF_ROT_CTRL, |
| VI6_WPF_ROT_CTRL_LN16 | |
| (256 << VI6_WPF_ROT_CTRL_LMEM_WD_SHIFT)); |
| } |
| |
| if (sink_format->code != source_format->code) |
| outfmt |= VI6_WPF_OUTFMT_CSC; |
| |
| wpf->outfmt = outfmt; |
| |
| vsp1_dl_list_write(dl, VI6_DPR_WPF_FPORCH(wpf->entity.index), |
| VI6_DPR_WPF_FPORCH_FP_WPFN); |
| |
| vsp1_dl_list_write(dl, VI6_WPF_WRBCK_CTRL, 0); |
| |
| /* Sources. If the pipeline has a single input and BRU is not used, |
| * configure it as the master layer. Otherwise configure all |
| * inputs as sub-layers and select the virtual RPF as the master |
| * layer. |
| */ |
| for (i = 0; i < vsp1->info->rpf_count; ++i) { |
| struct vsp1_rwpf *input = pipe->inputs[i]; |
| |
| if (!input) |
| continue; |
| |
| srcrpf |= (!pipe->bru && pipe->num_inputs == 1) |
| ? VI6_WPF_SRCRPF_RPF_ACT_MST(input->entity.index) |
| : VI6_WPF_SRCRPF_RPF_ACT_SUB(input->entity.index); |
| } |
| |
| if (pipe->bru || pipe->num_inputs > 1) |
| srcrpf |= VI6_WPF_SRCRPF_VIRACT_MST; |
| |
| vsp1_wpf_write(wpf, dl, VI6_WPF_SRCRPF, srcrpf); |
| |
| /* Enable interrupts */ |
| vsp1_dl_list_write(dl, VI6_WPF_IRQ_STA(wpf->entity.index), 0); |
| vsp1_dl_list_write(dl, VI6_WPF_IRQ_ENB(wpf->entity.index), |
| VI6_WFP_IRQ_ENB_DFEE); |
| } |
| |
| static const struct vsp1_entity_operations wpf_entity_ops = { |
| .destroy = vsp1_wpf_destroy, |
| .configure = wpf_configure, |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * Initialization and Cleanup |
| */ |
| |
| struct vsp1_rwpf *vsp1_wpf_create(struct vsp1_device *vsp1, unsigned int index) |
| { |
| struct vsp1_rwpf *wpf; |
| char name[6]; |
| int ret; |
| |
| wpf = devm_kzalloc(vsp1->dev, sizeof(*wpf), GFP_KERNEL); |
| if (wpf == NULL) |
| return ERR_PTR(-ENOMEM); |
| |
| if (vsp1->info->gen == 2) { |
| wpf->max_width = WPF_GEN2_MAX_WIDTH; |
| wpf->max_height = WPF_GEN2_MAX_HEIGHT; |
| } else { |
| wpf->max_width = WPF_GEN3_MAX_WIDTH; |
| wpf->max_height = WPF_GEN3_MAX_HEIGHT; |
| } |
| |
| wpf->entity.ops = &wpf_entity_ops; |
| wpf->entity.type = VSP1_ENTITY_WPF; |
| wpf->entity.index = index; |
| |
| sprintf(name, "wpf.%u", index); |
| ret = vsp1_entity_init(vsp1, &wpf->entity, name, 2, &wpf_ops, |
| MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER); |
| if (ret < 0) |
| return ERR_PTR(ret); |
| |
| /* Initialize the display list manager. */ |
| wpf->dlm = vsp1_dlm_create(vsp1, index, 4); |
| if (!wpf->dlm) { |
| ret = -ENOMEM; |
| goto error; |
| } |
| |
| /* Initialize the control handler. */ |
| ret = wpf_init_controls(wpf); |
| if (ret < 0) { |
| dev_err(vsp1->dev, "wpf%u: failed to initialize controls\n", |
| index); |
| goto error; |
| } |
| |
| v4l2_ctrl_handler_setup(&wpf->ctrls); |
| |
| return wpf; |
| |
| error: |
| vsp1_entity_destroy(&wpf->entity); |
| return ERR_PTR(ret); |
| } |