| /* |
| * linux/fs/ext3/ialloc.c |
| * |
| * Copyright (C) 1992, 1993, 1994, 1995 |
| * Remy Card (card@masi.ibp.fr) |
| * Laboratoire MASI - Institut Blaise Pascal |
| * Universite Pierre et Marie Curie (Paris VI) |
| * |
| * BSD ufs-inspired inode and directory allocation by |
| * Stephen Tweedie (sct@redhat.com), 1993 |
| * Big-endian to little-endian byte-swapping/bitmaps by |
| * David S. Miller (davem@caip.rutgers.edu), 1995 |
| */ |
| |
| #include <linux/time.h> |
| #include <linux/fs.h> |
| #include <linux/jbd.h> |
| #include <linux/ext3_fs.h> |
| #include <linux/ext3_jbd.h> |
| #include <linux/stat.h> |
| #include <linux/string.h> |
| #include <linux/quotaops.h> |
| #include <linux/buffer_head.h> |
| #include <linux/random.h> |
| #include <linux/bitops.h> |
| #include <trace/events/ext3.h> |
| |
| #include <asm/byteorder.h> |
| |
| #include "xattr.h" |
| #include "acl.h" |
| |
| /* |
| * ialloc.c contains the inodes allocation and deallocation routines |
| */ |
| |
| /* |
| * The free inodes are managed by bitmaps. A file system contains several |
| * blocks groups. Each group contains 1 bitmap block for blocks, 1 bitmap |
| * block for inodes, N blocks for the inode table and data blocks. |
| * |
| * The file system contains group descriptors which are located after the |
| * super block. Each descriptor contains the number of the bitmap block and |
| * the free blocks count in the block. |
| */ |
| |
| |
| /* |
| * Read the inode allocation bitmap for a given block_group, reading |
| * into the specified slot in the superblock's bitmap cache. |
| * |
| * Return buffer_head of bitmap on success or NULL. |
| */ |
| static struct buffer_head * |
| read_inode_bitmap(struct super_block * sb, unsigned long block_group) |
| { |
| struct ext3_group_desc *desc; |
| struct buffer_head *bh = NULL; |
| |
| desc = ext3_get_group_desc(sb, block_group, NULL); |
| if (!desc) |
| goto error_out; |
| |
| bh = sb_bread(sb, le32_to_cpu(desc->bg_inode_bitmap)); |
| if (!bh) |
| ext3_error(sb, "read_inode_bitmap", |
| "Cannot read inode bitmap - " |
| "block_group = %lu, inode_bitmap = %u", |
| block_group, le32_to_cpu(desc->bg_inode_bitmap)); |
| error_out: |
| return bh; |
| } |
| |
| /* |
| * NOTE! When we get the inode, we're the only people |
| * that have access to it, and as such there are no |
| * race conditions we have to worry about. The inode |
| * is not on the hash-lists, and it cannot be reached |
| * through the filesystem because the directory entry |
| * has been deleted earlier. |
| * |
| * HOWEVER: we must make sure that we get no aliases, |
| * which means that we have to call "clear_inode()" |
| * _before_ we mark the inode not in use in the inode |
| * bitmaps. Otherwise a newly created file might use |
| * the same inode number (not actually the same pointer |
| * though), and then we'd have two inodes sharing the |
| * same inode number and space on the harddisk. |
| */ |
| void ext3_free_inode (handle_t *handle, struct inode * inode) |
| { |
| struct super_block * sb = inode->i_sb; |
| int is_directory; |
| unsigned long ino; |
| struct buffer_head *bitmap_bh = NULL; |
| struct buffer_head *bh2; |
| unsigned long block_group; |
| unsigned long bit; |
| struct ext3_group_desc * gdp; |
| struct ext3_super_block * es; |
| struct ext3_sb_info *sbi; |
| int fatal = 0, err; |
| |
| if (atomic_read(&inode->i_count) > 1) { |
| printk ("ext3_free_inode: inode has count=%d\n", |
| atomic_read(&inode->i_count)); |
| return; |
| } |
| if (inode->i_nlink) { |
| printk ("ext3_free_inode: inode has nlink=%d\n", |
| inode->i_nlink); |
| return; |
| } |
| if (!sb) { |
| printk("ext3_free_inode: inode on nonexistent device\n"); |
| return; |
| } |
| sbi = EXT3_SB(sb); |
| |
| ino = inode->i_ino; |
| ext3_debug ("freeing inode %lu\n", ino); |
| trace_ext3_free_inode(inode); |
| |
| is_directory = S_ISDIR(inode->i_mode); |
| |
| es = EXT3_SB(sb)->s_es; |
| if (ino < EXT3_FIRST_INO(sb) || ino > le32_to_cpu(es->s_inodes_count)) { |
| ext3_error (sb, "ext3_free_inode", |
| "reserved or nonexistent inode %lu", ino); |
| goto error_return; |
| } |
| block_group = (ino - 1) / EXT3_INODES_PER_GROUP(sb); |
| bit = (ino - 1) % EXT3_INODES_PER_GROUP(sb); |
| bitmap_bh = read_inode_bitmap(sb, block_group); |
| if (!bitmap_bh) |
| goto error_return; |
| |
| BUFFER_TRACE(bitmap_bh, "get_write_access"); |
| fatal = ext3_journal_get_write_access(handle, bitmap_bh); |
| if (fatal) |
| goto error_return; |
| |
| /* Ok, now we can actually update the inode bitmaps.. */ |
| if (!ext3_clear_bit_atomic(sb_bgl_lock(sbi, block_group), |
| bit, bitmap_bh->b_data)) |
| ext3_error (sb, "ext3_free_inode", |
| "bit already cleared for inode %lu", ino); |
| else { |
| gdp = ext3_get_group_desc (sb, block_group, &bh2); |
| |
| BUFFER_TRACE(bh2, "get_write_access"); |
| fatal = ext3_journal_get_write_access(handle, bh2); |
| if (fatal) goto error_return; |
| |
| if (gdp) { |
| spin_lock(sb_bgl_lock(sbi, block_group)); |
| le16_add_cpu(&gdp->bg_free_inodes_count, 1); |
| if (is_directory) |
| le16_add_cpu(&gdp->bg_used_dirs_count, -1); |
| spin_unlock(sb_bgl_lock(sbi, block_group)); |
| percpu_counter_inc(&sbi->s_freeinodes_counter); |
| if (is_directory) |
| percpu_counter_dec(&sbi->s_dirs_counter); |
| |
| } |
| BUFFER_TRACE(bh2, "call ext3_journal_dirty_metadata"); |
| err = ext3_journal_dirty_metadata(handle, bh2); |
| if (!fatal) fatal = err; |
| } |
| BUFFER_TRACE(bitmap_bh, "call ext3_journal_dirty_metadata"); |
| err = ext3_journal_dirty_metadata(handle, bitmap_bh); |
| if (!fatal) |
| fatal = err; |
| |
| error_return: |
| brelse(bitmap_bh); |
| ext3_std_error(sb, fatal); |
| } |
| |
| /* |
| * Orlov's allocator for directories. |
| * |
| * We always try to spread first-level directories. |
| * |
| * If there are blockgroups with both free inodes and free blocks counts |
| * not worse than average we return one with smallest directory count. |
| * Otherwise we simply return a random group. |
| * |
| * For the rest rules look so: |
| * |
| * It's OK to put directory into a group unless |
| * it has too many directories already (max_dirs) or |
| * it has too few free inodes left (min_inodes) or |
| * it has too few free blocks left (min_blocks) or |
| * it's already running too large debt (max_debt). |
| * Parent's group is preferred, if it doesn't satisfy these |
| * conditions we search cyclically through the rest. If none |
| * of the groups look good we just look for a group with more |
| * free inodes than average (starting at parent's group). |
| * |
| * Debt is incremented each time we allocate a directory and decremented |
| * when we allocate an inode, within 0--255. |
| */ |
| |
| #define INODE_COST 64 |
| #define BLOCK_COST 256 |
| |
| static int find_group_orlov(struct super_block *sb, struct inode *parent) |
| { |
| int parent_group = EXT3_I(parent)->i_block_group; |
| struct ext3_sb_info *sbi = EXT3_SB(sb); |
| struct ext3_super_block *es = sbi->s_es; |
| int ngroups = sbi->s_groups_count; |
| int inodes_per_group = EXT3_INODES_PER_GROUP(sb); |
| unsigned int freei, avefreei; |
| ext3_fsblk_t freeb, avefreeb; |
| ext3_fsblk_t blocks_per_dir; |
| unsigned int ndirs; |
| int max_debt, max_dirs, min_inodes; |
| ext3_grpblk_t min_blocks; |
| int group = -1, i; |
| struct ext3_group_desc *desc; |
| |
| freei = percpu_counter_read_positive(&sbi->s_freeinodes_counter); |
| avefreei = freei / ngroups; |
| freeb = percpu_counter_read_positive(&sbi->s_freeblocks_counter); |
| avefreeb = freeb / ngroups; |
| ndirs = percpu_counter_read_positive(&sbi->s_dirs_counter); |
| |
| if ((parent == sb->s_root->d_inode) || |
| (EXT3_I(parent)->i_flags & EXT3_TOPDIR_FL)) { |
| int best_ndir = inodes_per_group; |
| int best_group = -1; |
| |
| get_random_bytes(&group, sizeof(group)); |
| parent_group = (unsigned)group % ngroups; |
| for (i = 0; i < ngroups; i++) { |
| group = (parent_group + i) % ngroups; |
| desc = ext3_get_group_desc (sb, group, NULL); |
| if (!desc || !desc->bg_free_inodes_count) |
| continue; |
| if (le16_to_cpu(desc->bg_used_dirs_count) >= best_ndir) |
| continue; |
| if (le16_to_cpu(desc->bg_free_inodes_count) < avefreei) |
| continue; |
| if (le16_to_cpu(desc->bg_free_blocks_count) < avefreeb) |
| continue; |
| best_group = group; |
| best_ndir = le16_to_cpu(desc->bg_used_dirs_count); |
| } |
| if (best_group >= 0) |
| return best_group; |
| goto fallback; |
| } |
| |
| blocks_per_dir = (le32_to_cpu(es->s_blocks_count) - freeb) / ndirs; |
| |
| max_dirs = ndirs / ngroups + inodes_per_group / 16; |
| min_inodes = avefreei - inodes_per_group / 4; |
| min_blocks = avefreeb - EXT3_BLOCKS_PER_GROUP(sb) / 4; |
| |
| max_debt = EXT3_BLOCKS_PER_GROUP(sb) / max(blocks_per_dir, (ext3_fsblk_t)BLOCK_COST); |
| if (max_debt * INODE_COST > inodes_per_group) |
| max_debt = inodes_per_group / INODE_COST; |
| if (max_debt > 255) |
| max_debt = 255; |
| if (max_debt == 0) |
| max_debt = 1; |
| |
| for (i = 0; i < ngroups; i++) { |
| group = (parent_group + i) % ngroups; |
| desc = ext3_get_group_desc (sb, group, NULL); |
| if (!desc || !desc->bg_free_inodes_count) |
| continue; |
| if (le16_to_cpu(desc->bg_used_dirs_count) >= max_dirs) |
| continue; |
| if (le16_to_cpu(desc->bg_free_inodes_count) < min_inodes) |
| continue; |
| if (le16_to_cpu(desc->bg_free_blocks_count) < min_blocks) |
| continue; |
| return group; |
| } |
| |
| fallback: |
| for (i = 0; i < ngroups; i++) { |
| group = (parent_group + i) % ngroups; |
| desc = ext3_get_group_desc (sb, group, NULL); |
| if (!desc || !desc->bg_free_inodes_count) |
| continue; |
| if (le16_to_cpu(desc->bg_free_inodes_count) >= avefreei) |
| return group; |
| } |
| |
| if (avefreei) { |
| /* |
| * The free-inodes counter is approximate, and for really small |
| * filesystems the above test can fail to find any blockgroups |
| */ |
| avefreei = 0; |
| goto fallback; |
| } |
| |
| return -1; |
| } |
| |
| static int find_group_other(struct super_block *sb, struct inode *parent) |
| { |
| int parent_group = EXT3_I(parent)->i_block_group; |
| int ngroups = EXT3_SB(sb)->s_groups_count; |
| struct ext3_group_desc *desc; |
| int group, i; |
| |
| /* |
| * Try to place the inode in its parent directory |
| */ |
| group = parent_group; |
| desc = ext3_get_group_desc (sb, group, NULL); |
| if (desc && le16_to_cpu(desc->bg_free_inodes_count) && |
| le16_to_cpu(desc->bg_free_blocks_count)) |
| return group; |
| |
| /* |
| * We're going to place this inode in a different blockgroup from its |
| * parent. We want to cause files in a common directory to all land in |
| * the same blockgroup. But we want files which are in a different |
| * directory which shares a blockgroup with our parent to land in a |
| * different blockgroup. |
| * |
| * So add our directory's i_ino into the starting point for the hash. |
| */ |
| group = (group + parent->i_ino) % ngroups; |
| |
| /* |
| * Use a quadratic hash to find a group with a free inode and some free |
| * blocks. |
| */ |
| for (i = 1; i < ngroups; i <<= 1) { |
| group += i; |
| if (group >= ngroups) |
| group -= ngroups; |
| desc = ext3_get_group_desc (sb, group, NULL); |
| if (desc && le16_to_cpu(desc->bg_free_inodes_count) && |
| le16_to_cpu(desc->bg_free_blocks_count)) |
| return group; |
| } |
| |
| /* |
| * That failed: try linear search for a free inode, even if that group |
| * has no free blocks. |
| */ |
| group = parent_group; |
| for (i = 0; i < ngroups; i++) { |
| if (++group >= ngroups) |
| group = 0; |
| desc = ext3_get_group_desc (sb, group, NULL); |
| if (desc && le16_to_cpu(desc->bg_free_inodes_count)) |
| return group; |
| } |
| |
| return -1; |
| } |
| |
| /* |
| * There are two policies for allocating an inode. If the new inode is |
| * a directory, then a forward search is made for a block group with both |
| * free space and a low directory-to-inode ratio; if that fails, then of |
| * the groups with above-average free space, that group with the fewest |
| * directories already is chosen. |
| * |
| * For other inodes, search forward from the parent directory's block |
| * group to find a free inode. |
| */ |
| struct inode *ext3_new_inode(handle_t *handle, struct inode * dir, |
| const struct qstr *qstr, umode_t mode) |
| { |
| struct super_block *sb; |
| struct buffer_head *bitmap_bh = NULL; |
| struct buffer_head *bh2; |
| int group; |
| unsigned long ino = 0; |
| struct inode * inode; |
| struct ext3_group_desc * gdp = NULL; |
| struct ext3_super_block * es; |
| struct ext3_inode_info *ei; |
| struct ext3_sb_info *sbi; |
| int err = 0; |
| struct inode *ret; |
| int i; |
| |
| /* Cannot create files in a deleted directory */ |
| if (!dir || !dir->i_nlink) |
| return ERR_PTR(-EPERM); |
| |
| sb = dir->i_sb; |
| trace_ext3_request_inode(dir, mode); |
| inode = new_inode(sb); |
| if (!inode) |
| return ERR_PTR(-ENOMEM); |
| ei = EXT3_I(inode); |
| |
| sbi = EXT3_SB(sb); |
| es = sbi->s_es; |
| if (S_ISDIR(mode)) |
| group = find_group_orlov(sb, dir); |
| else |
| group = find_group_other(sb, dir); |
| |
| err = -ENOSPC; |
| if (group == -1) |
| goto out; |
| |
| for (i = 0; i < sbi->s_groups_count; i++) { |
| err = -EIO; |
| |
| gdp = ext3_get_group_desc(sb, group, &bh2); |
| if (!gdp) |
| goto fail; |
| |
| brelse(bitmap_bh); |
| bitmap_bh = read_inode_bitmap(sb, group); |
| if (!bitmap_bh) |
| goto fail; |
| |
| ino = 0; |
| |
| repeat_in_this_group: |
| ino = ext3_find_next_zero_bit((unsigned long *) |
| bitmap_bh->b_data, EXT3_INODES_PER_GROUP(sb), ino); |
| if (ino < EXT3_INODES_PER_GROUP(sb)) { |
| |
| BUFFER_TRACE(bitmap_bh, "get_write_access"); |
| err = ext3_journal_get_write_access(handle, bitmap_bh); |
| if (err) |
| goto fail; |
| |
| if (!ext3_set_bit_atomic(sb_bgl_lock(sbi, group), |
| ino, bitmap_bh->b_data)) { |
| /* we won it */ |
| BUFFER_TRACE(bitmap_bh, |
| "call ext3_journal_dirty_metadata"); |
| err = ext3_journal_dirty_metadata(handle, |
| bitmap_bh); |
| if (err) |
| goto fail; |
| goto got; |
| } |
| /* we lost it */ |
| journal_release_buffer(handle, bitmap_bh); |
| |
| if (++ino < EXT3_INODES_PER_GROUP(sb)) |
| goto repeat_in_this_group; |
| } |
| |
| /* |
| * This case is possible in concurrent environment. It is very |
| * rare. We cannot repeat the find_group_xxx() call because |
| * that will simply return the same blockgroup, because the |
| * group descriptor metadata has not yet been updated. |
| * So we just go onto the next blockgroup. |
| */ |
| if (++group == sbi->s_groups_count) |
| group = 0; |
| } |
| err = -ENOSPC; |
| goto out; |
| |
| got: |
| ino += group * EXT3_INODES_PER_GROUP(sb) + 1; |
| if (ino < EXT3_FIRST_INO(sb) || ino > le32_to_cpu(es->s_inodes_count)) { |
| ext3_error (sb, "ext3_new_inode", |
| "reserved inode or inode > inodes count - " |
| "block_group = %d, inode=%lu", group, ino); |
| err = -EIO; |
| goto fail; |
| } |
| |
| BUFFER_TRACE(bh2, "get_write_access"); |
| err = ext3_journal_get_write_access(handle, bh2); |
| if (err) goto fail; |
| spin_lock(sb_bgl_lock(sbi, group)); |
| le16_add_cpu(&gdp->bg_free_inodes_count, -1); |
| if (S_ISDIR(mode)) { |
| le16_add_cpu(&gdp->bg_used_dirs_count, 1); |
| } |
| spin_unlock(sb_bgl_lock(sbi, group)); |
| BUFFER_TRACE(bh2, "call ext3_journal_dirty_metadata"); |
| err = ext3_journal_dirty_metadata(handle, bh2); |
| if (err) goto fail; |
| |
| percpu_counter_dec(&sbi->s_freeinodes_counter); |
| if (S_ISDIR(mode)) |
| percpu_counter_inc(&sbi->s_dirs_counter); |
| |
| |
| if (test_opt(sb, GRPID)) { |
| inode->i_mode = mode; |
| inode->i_uid = current_fsuid(); |
| inode->i_gid = dir->i_gid; |
| } else |
| inode_init_owner(inode, dir, mode); |
| |
| inode->i_ino = ino; |
| /* This is the optimal IO size (for stat), not the fs block size */ |
| inode->i_blocks = 0; |
| inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC; |
| |
| memset(ei->i_data, 0, sizeof(ei->i_data)); |
| ei->i_dir_start_lookup = 0; |
| ei->i_disksize = 0; |
| |
| ei->i_flags = |
| ext3_mask_flags(mode, EXT3_I(dir)->i_flags & EXT3_FL_INHERITED); |
| #ifdef EXT3_FRAGMENTS |
| ei->i_faddr = 0; |
| ei->i_frag_no = 0; |
| ei->i_frag_size = 0; |
| #endif |
| ei->i_file_acl = 0; |
| ei->i_dir_acl = 0; |
| ei->i_dtime = 0; |
| ei->i_block_alloc_info = NULL; |
| ei->i_block_group = group; |
| |
| ext3_set_inode_flags(inode); |
| if (IS_DIRSYNC(inode)) |
| handle->h_sync = 1; |
| if (insert_inode_locked(inode) < 0) { |
| err = -EINVAL; |
| goto fail_drop; |
| } |
| spin_lock(&sbi->s_next_gen_lock); |
| inode->i_generation = sbi->s_next_generation++; |
| spin_unlock(&sbi->s_next_gen_lock); |
| |
| ei->i_state_flags = 0; |
| ext3_set_inode_state(inode, EXT3_STATE_NEW); |
| |
| /* See comment in ext3_iget for explanation */ |
| if (ino >= EXT3_FIRST_INO(sb) + 1 && |
| EXT3_INODE_SIZE(sb) > EXT3_GOOD_OLD_INODE_SIZE) { |
| ei->i_extra_isize = |
| sizeof(struct ext3_inode) - EXT3_GOOD_OLD_INODE_SIZE; |
| } else { |
| ei->i_extra_isize = 0; |
| } |
| |
| ret = inode; |
| dquot_initialize(inode); |
| err = dquot_alloc_inode(inode); |
| if (err) |
| goto fail_drop; |
| |
| err = ext3_init_acl(handle, inode, dir); |
| if (err) |
| goto fail_free_drop; |
| |
| err = ext3_init_security(handle, inode, dir, qstr); |
| if (err) |
| goto fail_free_drop; |
| |
| err = ext3_mark_inode_dirty(handle, inode); |
| if (err) { |
| ext3_std_error(sb, err); |
| goto fail_free_drop; |
| } |
| |
| ext3_debug("allocating inode %lu\n", inode->i_ino); |
| trace_ext3_allocate_inode(inode, dir, mode); |
| goto really_out; |
| fail: |
| ext3_std_error(sb, err); |
| out: |
| iput(inode); |
| ret = ERR_PTR(err); |
| really_out: |
| brelse(bitmap_bh); |
| return ret; |
| |
| fail_free_drop: |
| dquot_free_inode(inode); |
| |
| fail_drop: |
| dquot_drop(inode); |
| inode->i_flags |= S_NOQUOTA; |
| clear_nlink(inode); |
| unlock_new_inode(inode); |
| iput(inode); |
| brelse(bitmap_bh); |
| return ERR_PTR(err); |
| } |
| |
| /* Verify that we are loading a valid orphan from disk */ |
| struct inode *ext3_orphan_get(struct super_block *sb, unsigned long ino) |
| { |
| unsigned long max_ino = le32_to_cpu(EXT3_SB(sb)->s_es->s_inodes_count); |
| unsigned long block_group; |
| int bit; |
| struct buffer_head *bitmap_bh; |
| struct inode *inode = NULL; |
| long err = -EIO; |
| |
| /* Error cases - e2fsck has already cleaned up for us */ |
| if (ino > max_ino) { |
| ext3_warning(sb, __func__, |
| "bad orphan ino %lu! e2fsck was run?", ino); |
| goto error; |
| } |
| |
| block_group = (ino - 1) / EXT3_INODES_PER_GROUP(sb); |
| bit = (ino - 1) % EXT3_INODES_PER_GROUP(sb); |
| bitmap_bh = read_inode_bitmap(sb, block_group); |
| if (!bitmap_bh) { |
| ext3_warning(sb, __func__, |
| "inode bitmap error for orphan %lu", ino); |
| goto error; |
| } |
| |
| /* Having the inode bit set should be a 100% indicator that this |
| * is a valid orphan (no e2fsck run on fs). Orphans also include |
| * inodes that were being truncated, so we can't check i_nlink==0. |
| */ |
| if (!ext3_test_bit(bit, bitmap_bh->b_data)) |
| goto bad_orphan; |
| |
| inode = ext3_iget(sb, ino); |
| if (IS_ERR(inode)) |
| goto iget_failed; |
| |
| /* |
| * If the orphans has i_nlinks > 0 then it should be able to be |
| * truncated, otherwise it won't be removed from the orphan list |
| * during processing and an infinite loop will result. |
| */ |
| if (inode->i_nlink && !ext3_can_truncate(inode)) |
| goto bad_orphan; |
| |
| if (NEXT_ORPHAN(inode) > max_ino) |
| goto bad_orphan; |
| brelse(bitmap_bh); |
| return inode; |
| |
| iget_failed: |
| err = PTR_ERR(inode); |
| inode = NULL; |
| bad_orphan: |
| ext3_warning(sb, __func__, |
| "bad orphan inode %lu! e2fsck was run?", ino); |
| printk(KERN_NOTICE "ext3_test_bit(bit=%d, block=%llu) = %d\n", |
| bit, (unsigned long long)bitmap_bh->b_blocknr, |
| ext3_test_bit(bit, bitmap_bh->b_data)); |
| printk(KERN_NOTICE "inode=%p\n", inode); |
| if (inode) { |
| printk(KERN_NOTICE "is_bad_inode(inode)=%d\n", |
| is_bad_inode(inode)); |
| printk(KERN_NOTICE "NEXT_ORPHAN(inode)=%u\n", |
| NEXT_ORPHAN(inode)); |
| printk(KERN_NOTICE "max_ino=%lu\n", max_ino); |
| printk(KERN_NOTICE "i_nlink=%u\n", inode->i_nlink); |
| /* Avoid freeing blocks if we got a bad deleted inode */ |
| if (inode->i_nlink == 0) |
| inode->i_blocks = 0; |
| iput(inode); |
| } |
| brelse(bitmap_bh); |
| error: |
| return ERR_PTR(err); |
| } |
| |
| unsigned long ext3_count_free_inodes (struct super_block * sb) |
| { |
| unsigned long desc_count; |
| struct ext3_group_desc *gdp; |
| int i; |
| #ifdef EXT3FS_DEBUG |
| struct ext3_super_block *es; |
| unsigned long bitmap_count, x; |
| struct buffer_head *bitmap_bh = NULL; |
| |
| es = EXT3_SB(sb)->s_es; |
| desc_count = 0; |
| bitmap_count = 0; |
| gdp = NULL; |
| for (i = 0; i < EXT3_SB(sb)->s_groups_count; i++) { |
| gdp = ext3_get_group_desc (sb, i, NULL); |
| if (!gdp) |
| continue; |
| desc_count += le16_to_cpu(gdp->bg_free_inodes_count); |
| brelse(bitmap_bh); |
| bitmap_bh = read_inode_bitmap(sb, i); |
| if (!bitmap_bh) |
| continue; |
| |
| x = ext3_count_free(bitmap_bh, EXT3_INODES_PER_GROUP(sb) / 8); |
| printk("group %d: stored = %d, counted = %lu\n", |
| i, le16_to_cpu(gdp->bg_free_inodes_count), x); |
| bitmap_count += x; |
| } |
| brelse(bitmap_bh); |
| printk("ext3_count_free_inodes: stored = %u, computed = %lu, %lu\n", |
| le32_to_cpu(es->s_free_inodes_count), desc_count, bitmap_count); |
| return desc_count; |
| #else |
| desc_count = 0; |
| for (i = 0; i < EXT3_SB(sb)->s_groups_count; i++) { |
| gdp = ext3_get_group_desc (sb, i, NULL); |
| if (!gdp) |
| continue; |
| desc_count += le16_to_cpu(gdp->bg_free_inodes_count); |
| cond_resched(); |
| } |
| return desc_count; |
| #endif |
| } |
| |
| /* Called at mount-time, super-block is locked */ |
| unsigned long ext3_count_dirs (struct super_block * sb) |
| { |
| unsigned long count = 0; |
| int i; |
| |
| for (i = 0; i < EXT3_SB(sb)->s_groups_count; i++) { |
| struct ext3_group_desc *gdp = ext3_get_group_desc (sb, i, NULL); |
| if (!gdp) |
| continue; |
| count += le16_to_cpu(gdp->bg_used_dirs_count); |
| } |
| return count; |
| } |
| |