Merge branch 'topic/samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-dma
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c1f1a7e..ba0e232 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -723,6 +723,7 @@
bool "Samsung S3C64XX"
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
+ select ARM_AMBA
select ARM_VIC
select CLKDEV_LOOKUP
select CLKSRC_SAMSUNG_PWM
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 2cb8dc5..7094bcc 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -17,9 +17,10 @@
help
Enable S3C6410 CPU support
-config S3C64XX_DMA
- bool "S3C64XX DMA"
- select S3C_DMA
+config S3C64XX_PL080
+ bool "S3C64XX DMA using generic PL08x driver"
+ select AMBA_PL08X
+ select SAMSUNG_DMADEV
config S3C64XX_SETUP_SDHCI
bool
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 6faedcf..58069a7 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -26,7 +26,7 @@
# DMA support
-obj-$(CONFIG_S3C64XX_DMA) += dma.o
+obj-$(CONFIG_S3C64XX_PL080) += pl080.o
# Device support
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
index bd3bd56..7043e7a 100644
--- a/arch/arm/mach-s3c64xx/common.h
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -58,4 +58,9 @@
static inline int s3c64xx_pm_late_initcall(void) { return 0; }
#endif
+#ifdef CONFIG_S3C64XX_PL080
+extern struct pl08x_platform_data s3c64xx_dma0_plat_data;
+extern struct pl08x_platform_data s3c64xx_dma1_plat_data;
+#endif
+
#endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
deleted file mode 100644
index 7e22c21..0000000
--- a/arch/arm/mach-s3c64xx/dma.c
+++ /dev/null
@@ -1,762 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/dma.c
- *
- * Copyright 2009 Openmoko, Inc.
- * Copyright 2009 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX DMA core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/*
- * NOTE: Code in this file is not used when booting with Device Tree support.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/dmapool.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/amba/pl080.h>
-#include <linux/of.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include "regs-sys.h"
-
-/* dma channel state information */
-
-struct s3c64xx_dmac {
- struct device dev;
- struct clk *clk;
- void __iomem *regs;
- struct s3c2410_dma_chan *channels;
- enum dma_ch chanbase;
-};
-
-/* pool to provide LLI buffers */
-static struct dma_pool *dma_pool;
-
-/* Debug configuration and code */
-
-static unsigned char debug_show_buffs = 0;
-
-static void dbg_showchan(struct s3c2410_dma_chan *chan)
-{
- pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n",
- chan->number,
- readl(chan->regs + PL080_CH_SRC_ADDR),
- readl(chan->regs + PL080_CH_DST_ADDR),
- readl(chan->regs + PL080_CH_LLI),
- readl(chan->regs + PL080_CH_CONTROL),
- readl(chan->regs + PL080S_CH_CONTROL2),
- readl(chan->regs + PL080S_CH_CONFIG));
-}
-
-static void show_lli(struct pl080s_lli *lli)
-{
- pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n",
- lli, lli->src_addr, lli->dst_addr, lli->next_lli,
- lli->control0, lli->control1);
-}
-
-static void dbg_showbuffs(struct s3c2410_dma_chan *chan)
-{
- struct s3c64xx_dma_buff *ptr;
- struct s3c64xx_dma_buff *end;
-
- pr_debug("DMA%d: buffs next %p, curr %p, end %p\n",
- chan->number, chan->next, chan->curr, chan->end);
-
- ptr = chan->next;
- end = chan->end;
-
- if (debug_show_buffs) {
- for (; ptr != NULL; ptr = ptr->next) {
- pr_debug("DMA%d: %08x ",
- chan->number, ptr->lli_dma);
- show_lli(ptr->lli);
- }
- }
-}
-
-/* End of Debug */
-
-static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel)
-{
- struct s3c2410_dma_chan *chan;
- unsigned int start, offs;
-
- start = 0;
-
- if (channel >= DMACH_PCM1_TX)
- start = 8;
-
- for (offs = 0; offs < 8; offs++) {
- chan = &s3c2410_chans[start + offs];
- if (!chan->in_use)
- goto found;
- }
-
- return NULL;
-
-found:
- s3c_dma_chan_map[channel] = chan;
- return chan;
-}
-
-int s3c2410_dma_config(enum dma_ch channel, int xferunit)
-{
- struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
- if (chan == NULL)
- return -EINVAL;
-
- switch (xferunit) {
- case 1:
- chan->hw_width = 0;
- break;
- case 2:
- chan->hw_width = 1;
- break;
- case 4:
- chan->hw_width = 2;
- break;
- default:
- printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit);
- return -EINVAL;
- }
-
- return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_config);
-
-static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
- struct pl080s_lli *lli,
- dma_addr_t data, int size)
-{
- dma_addr_t src, dst;
- u32 control0, control1;
-
- switch (chan->source) {
- case DMA_FROM_DEVICE:
- src = chan->dev_addr;
- dst = data;
- control0 = PL080_CONTROL_SRC_AHB2;
- control0 |= PL080_CONTROL_DST_INCR;
- break;
-
- case DMA_TO_DEVICE:
- src = data;
- dst = chan->dev_addr;
- control0 = PL080_CONTROL_DST_AHB2;
- control0 |= PL080_CONTROL_SRC_INCR;
- break;
- default:
- BUG();
- }
-
- /* note, we do not currently setup any of the burst controls */
-
- control1 = size >> chan->hw_width; /* size in no of xfers */
- control0 |= PL080_CONTROL_PROT_SYS; /* always in priv. mode */
- control0 |= PL080_CONTROL_TC_IRQ_EN; /* always fire IRQ */
- control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
- control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
-
- lli->src_addr = src;
- lli->dst_addr = dst;
- lli->next_lli = 0;
- lli->control0 = control0;
- lli->control1 = control1;
-}
-
-static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan,
- struct pl080s_lli *lli)
-{
- void __iomem *regs = chan->regs;
-
- pr_debug("%s: LLI %p => regs\n", __func__, lli);
- show_lli(lli);
-
- writel(lli->src_addr, regs + PL080_CH_SRC_ADDR);
- writel(lli->dst_addr, regs + PL080_CH_DST_ADDR);
- writel(lli->next_lli, regs + PL080_CH_LLI);
- writel(lli->control0, regs + PL080_CH_CONTROL);
- writel(lli->control1, regs + PL080S_CH_CONTROL2);
-}
-
-static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan)
-{
- struct s3c64xx_dmac *dmac = chan->dmac;
- u32 config;
- u32 bit = chan->bit;
-
- dbg_showchan(chan);
-
- pr_debug("%s: clearing interrupts\n", __func__);
-
- /* clear interrupts */
- writel(bit, dmac->regs + PL080_TC_CLEAR);
- writel(bit, dmac->regs + PL080_ERR_CLEAR);
-
- pr_debug("%s: starting channel\n", __func__);
-
- config = readl(chan->regs + PL080S_CH_CONFIG);
- config |= PL080_CONFIG_ENABLE;
- config &= ~PL080_CONFIG_HALT;
-
- pr_debug("%s: writing config %08x\n", __func__, config);
- writel(config, chan->regs + PL080S_CH_CONFIG);
-
- return 0;
-}
-
-static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan)
-{
- u32 config;
- int timeout;
-
- pr_debug("%s: stopping channel\n", __func__);
-
- dbg_showchan(chan);
-
- config = readl(chan->regs + PL080S_CH_CONFIG);
- config |= PL080_CONFIG_HALT;
- writel(config, chan->regs + PL080S_CH_CONFIG);
-
- timeout = 1000;
- do {
- config = readl(chan->regs + PL080S_CH_CONFIG);
- pr_debug("%s: %d - config %08x\n", __func__, timeout, config);
- if (config & PL080_CONFIG_ACTIVE)
- udelay(10);
- else
- break;
- } while (--timeout > 0);
-
- if (config & PL080_CONFIG_ACTIVE) {
- printk(KERN_ERR "%s: channel still active\n", __func__);
- return -EFAULT;
- }
-
- config = readl(chan->regs + PL080S_CH_CONFIG);
- config &= ~PL080_CONFIG_ENABLE;
- writel(config, chan->regs + PL080S_CH_CONFIG);
-
- return 0;
-}
-
-static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan,
- struct s3c64xx_dma_buff *buf,
- enum s3c2410_dma_buffresult result)
-{
- if (chan->callback_fn != NULL)
- (chan->callback_fn)(chan, buf->pw, 0, result);
-}
-
-static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff)
-{
- dma_pool_free(dma_pool, buff->lli, buff->lli_dma);
- kfree(buff);
-}
-
-static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan)
-{
- struct s3c64xx_dma_buff *buff, *next;
- u32 config;
-
- dbg_showchan(chan);
-
- pr_debug("%s: flushing channel\n", __func__);
-
- config = readl(chan->regs + PL080S_CH_CONFIG);
- config &= ~PL080_CONFIG_ENABLE;
- writel(config, chan->regs + PL080S_CH_CONFIG);
-
- /* dump all the buffers associated with this channel */
-
- for (buff = chan->curr; buff != NULL; buff = next) {
- next = buff->next;
- pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next);
-
- s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT);
- s3c64xx_dma_freebuff(buff);
- }
-
- chan->curr = chan->next = chan->end = NULL;
-
- return 0;
-}
-
-int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op)
-{
- struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
- WARN_ON(!chan);
- if (!chan)
- return -EINVAL;
-
- switch (op) {
- case S3C2410_DMAOP_START:
- return s3c64xx_dma_start(chan);
-
- case S3C2410_DMAOP_STOP:
- return s3c64xx_dma_stop(chan);
-
- case S3C2410_DMAOP_FLUSH:
- return s3c64xx_dma_flush(chan);
-
- /* believe PAUSE/RESUME are no-ops */
- case S3C2410_DMAOP_PAUSE:
- case S3C2410_DMAOP_RESUME:
- case S3C2410_DMAOP_STARTED:
- case S3C2410_DMAOP_TIMEOUT:
- return 0;
- }
-
- return -ENOENT;
-}
-EXPORT_SYMBOL(s3c2410_dma_ctrl);
-
-/* s3c2410_dma_enque
- *
- */
-
-int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
- dma_addr_t data, int size)
-{
- struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
- struct s3c64xx_dma_buff *next;
- struct s3c64xx_dma_buff *buff;
- struct pl080s_lli *lli;
- unsigned long flags;
- int ret;
-
- WARN_ON(!chan);
- if (!chan)
- return -EINVAL;
-
- buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_ATOMIC);
- if (!buff) {
- printk(KERN_ERR "%s: no memory for buffer\n", __func__);
- return -ENOMEM;
- }
-
- lli = dma_pool_alloc(dma_pool, GFP_ATOMIC, &buff->lli_dma);
- if (!lli) {
- printk(KERN_ERR "%s: no memory for lli\n", __func__);
- ret = -ENOMEM;
- goto err_buff;
- }
-
- pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n",
- __func__, buff, data, lli, (u32)buff->lli_dma, size);
-
- buff->lli = lli;
- buff->pw = id;
-
- s3c64xx_dma_fill_lli(chan, lli, data, size);
-
- local_irq_save(flags);
-
- if ((next = chan->next) != NULL) {
- struct s3c64xx_dma_buff *end = chan->end;
- struct pl080s_lli *endlli = end->lli;
-
- pr_debug("enquing onto channel\n");
-
- end->next = buff;
- endlli->next_lli = buff->lli_dma;
-
- if (chan->flags & S3C2410_DMAF_CIRCULAR) {
- struct s3c64xx_dma_buff *curr = chan->curr;
- lli->next_lli = curr->lli_dma;
- }
-
- if (next == chan->curr) {
- writel(buff->lli_dma, chan->regs + PL080_CH_LLI);
- chan->next = buff;
- }
-
- show_lli(endlli);
- chan->end = buff;
- } else {
- pr_debug("enquing onto empty channel\n");
-
- chan->curr = buff;
- chan->next = buff;
- chan->end = buff;
-
- s3c64xx_lli_to_regs(chan, lli);
- }
-
- local_irq_restore(flags);
-
- show_lli(lli);
-
- dbg_showchan(chan);
- dbg_showbuffs(chan);
- return 0;
-
-err_buff:
- kfree(buff);
- return ret;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_enqueue);
-
-
-int s3c2410_dma_devconfig(enum dma_ch channel,
- enum dma_data_direction source,
- unsigned long devaddr)
-{
- struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
- u32 peripheral;
- u32 config = 0;
-
- pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n",
- __func__, channel, source, devaddr, chan);
-
- WARN_ON(!chan);
- if (!chan)
- return -EINVAL;
-
- peripheral = (chan->peripheral & 0xf);
- chan->source = source;
- chan->dev_addr = devaddr;
-
- pr_debug("%s: peripheral %d\n", __func__, peripheral);
-
- switch (source) {
- case DMA_FROM_DEVICE:
- config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
- config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
- break;
- case DMA_TO_DEVICE:
- config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
- config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
- break;
- default:
- printk(KERN_ERR "%s: bad source\n", __func__);
- return -EINVAL;
- }
-
- /* allow TC and ERR interrupts */
- config |= PL080_CONFIG_TC_IRQ_MASK;
- config |= PL080_CONFIG_ERR_IRQ_MASK;
-
- pr_debug("%s: config %08x\n", __func__, config);
-
- writel(config, chan->regs + PL080S_CH_CONFIG);
-
- return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_devconfig);
-
-
-int s3c2410_dma_getposition(enum dma_ch channel,
- dma_addr_t *src, dma_addr_t *dst)
-{
- struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
- WARN_ON(!chan);
- if (!chan)
- return -EINVAL;
-
- if (src != NULL)
- *src = readl(chan->regs + PL080_CH_SRC_ADDR);
-
- if (dst != NULL)
- *dst = readl(chan->regs + PL080_CH_DST_ADDR);
-
- return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_getposition);
-
-/* s3c2410_request_dma
- *
- * get control of an dma channel
-*/
-
-int s3c2410_dma_request(enum dma_ch channel,
- struct s3c2410_dma_client *client,
- void *dev)
-{
- struct s3c2410_dma_chan *chan;
- unsigned long flags;
-
- pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
- channel, client->name, dev);
-
- local_irq_save(flags);
-
- chan = s3c64xx_dma_map_channel(channel);
- if (chan == NULL) {
- local_irq_restore(flags);
- return -EBUSY;
- }
-
- dbg_showchan(chan);
-
- chan->client = client;
- chan->in_use = 1;
- chan->peripheral = channel;
- chan->flags = 0;
-
- local_irq_restore(flags);
-
- /* need to setup */
-
- pr_debug("%s: channel initialised, %p\n", __func__, chan);
-
- return chan->number | DMACH_LOW_LEVEL;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_request);
-
-/* s3c2410_dma_free
- *
- * release the given channel back to the system, will stop and flush
- * any outstanding transfers, and ensure the channel is ready for the
- * next claimant.
- *
- * Note, although a warning is currently printed if the freeing client
- * info is not the same as the registrant's client info, the free is still
- * allowed to go through.
-*/
-
-int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client)
-{
- struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
- unsigned long flags;
-
- if (chan == NULL)
- return -EINVAL;
-
- local_irq_save(flags);
-
- if (chan->client != client) {
- printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
- channel, chan->client, client);
- }
-
- /* sort out stopping and freeing the channel */
-
-
- chan->client = NULL;
- chan->in_use = 0;
-
- if (!(channel & DMACH_LOW_LEVEL))
- s3c_dma_chan_map[channel] = NULL;
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_free);
-
-static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
-{
- struct s3c64xx_dmac *dmac = pw;
- struct s3c2410_dma_chan *chan;
- enum s3c2410_dma_buffresult res;
- u32 tcstat, errstat;
- u32 bit;
- int offs;
-
- tcstat = readl(dmac->regs + PL080_TC_STATUS);
- errstat = readl(dmac->regs + PL080_ERR_STATUS);
-
- for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
- struct s3c64xx_dma_buff *buff;
-
- if (!(errstat & bit) && !(tcstat & bit))
- continue;
-
- chan = dmac->channels + offs;
- res = S3C2410_RES_ERR;
-
- if (tcstat & bit) {
- writel(bit, dmac->regs + PL080_TC_CLEAR);
- res = S3C2410_RES_OK;
- }
-
- if (errstat & bit)
- writel(bit, dmac->regs + PL080_ERR_CLEAR);
-
- /* 'next' points to the buffer that is next to the
- * currently active buffer.
- * For CIRCULAR queues, 'next' will be same as 'curr'
- * when 'end' is the active buffer.
- */
- buff = chan->curr;
- while (buff && buff != chan->next
- && buff->next != chan->next)
- buff = buff->next;
-
- if (!buff)
- BUG();
-
- if (buff == chan->next)
- buff = chan->end;
-
- s3c64xx_dma_bufffdone(chan, buff, res);
-
- /* Free the node and update curr, if non-circular queue */
- if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) {
- chan->curr = buff->next;
- s3c64xx_dma_freebuff(buff);
- }
-
- /* Update 'next' */
- buff = chan->next;
- if (chan->next == chan->end) {
- chan->next = chan->curr;
- if (!(chan->flags & S3C2410_DMAF_CIRCULAR))
- chan->end = NULL;
- } else {
- chan->next = buff->next;
- }
- }
-
- return IRQ_HANDLED;
-}
-
-static struct bus_type dma_subsys = {
- .name = "s3c64xx-dma",
- .dev_name = "s3c64xx-dma",
-};
-
-static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
- int irq, unsigned int base)
-{
- struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno];
- struct s3c64xx_dmac *dmac;
- char clkname[16];
- void __iomem *regs;
- void __iomem *regptr;
- int err, ch;
-
- dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL);
- if (!dmac) {
- printk(KERN_ERR "%s: failed to alloc mem\n", __func__);
- return -ENOMEM;
- }
-
- dmac->dev.id = chno / 8;
- dmac->dev.bus = &dma_subsys;
-
- err = device_register(&dmac->dev);
- if (err) {
- printk(KERN_ERR "%s: failed to register device\n", __func__);
- goto err_alloc;
- }
-
- regs = ioremap(base, 0x200);
- if (!regs) {
- printk(KERN_ERR "%s: failed to ioremap()\n", __func__);
- err = -ENXIO;
- goto err_dev;
- }
-
- snprintf(clkname, sizeof(clkname), "dma%d", dmac->dev.id);
-
- dmac->clk = clk_get(NULL, clkname);
- if (IS_ERR(dmac->clk)) {
- printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname);
- err = PTR_ERR(dmac->clk);
- goto err_map;
- }
-
- clk_prepare_enable(dmac->clk);
-
- dmac->regs = regs;
- dmac->chanbase = chbase;
- dmac->channels = chptr;
-
- err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac);
- if (err < 0) {
- printk(KERN_ERR "%s: failed to get irq\n", __func__);
- goto err_clk;
- }
-
- regptr = regs + PL080_Cx_BASE(0);
-
- for (ch = 0; ch < 8; ch++, chptr++) {
- pr_debug("%s: registering DMA %d (%p)\n",
- __func__, chno + ch, regptr);
-
- chptr->bit = 1 << ch;
- chptr->number = chno + ch;
- chptr->dmac = dmac;
- chptr->regs = regptr;
- regptr += PL080_Cx_STRIDE;
- }
-
- /* for the moment, permanently enable the controller */
- writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
-
- printk(KERN_INFO "PL080: IRQ %d, at %p, channels %d..%d\n",
- irq, regs, chno, chno+8);
-
- return 0;
-
-err_clk:
- clk_disable_unprepare(dmac->clk);
- clk_put(dmac->clk);
-err_map:
- iounmap(regs);
-err_dev:
- device_unregister(&dmac->dev);
-err_alloc:
- kfree(dmac);
- return err;
-}
-
-static int __init s3c64xx_dma_init(void)
-{
- int ret;
-
- /* This driver is not supported when booting with device tree. */
- if (of_have_populated_dt())
- return -ENODEV;
-
- printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
-
- dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0);
- if (!dma_pool) {
- printk(KERN_ERR "%s: failed to create pool\n", __func__);
- return -ENOMEM;
- }
-
- ret = subsys_system_register(&dma_subsys, NULL);
- if (ret) {
- printk(KERN_ERR "%s: failed to create subsys\n", __func__);
- return -ENOMEM;
- }
-
- /* Set all DMA configuration to be DMA, not SDMA */
- writel(0xffffff, S3C64XX_SDMA_SEL);
-
- /* Register standard DMA controllers */
- s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
- s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
-
- return 0;
-}
-
-arch_initcall(s3c64xx_dma_init);
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
index fe1a98c..059b1fc 100644
--- a/arch/arm/mach-s3c64xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -11,51 +11,48 @@
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H __FILE__
-#define S3C_DMA_CHANNELS (16)
+#define S3C64XX_DMA_CHAN(name) ((unsigned long)(name))
-/* see mach-s3c2410/dma.h for notes on dma channel numbers */
+/* DMA0/SDMA0 */
+#define DMACH_UART0 S3C64XX_DMA_CHAN("uart0_tx")
+#define DMACH_UART0_SRC2 S3C64XX_DMA_CHAN("uart0_rx")
+#define DMACH_UART1 S3C64XX_DMA_CHAN("uart1_tx")
+#define DMACH_UART1_SRC2 S3C64XX_DMA_CHAN("uart1_rx")
+#define DMACH_UART2 S3C64XX_DMA_CHAN("uart2_tx")
+#define DMACH_UART2_SRC2 S3C64XX_DMA_CHAN("uart2_rx")
+#define DMACH_UART3 S3C64XX_DMA_CHAN("uart3_tx")
+#define DMACH_UART3_SRC2 S3C64XX_DMA_CHAN("uart3_rx")
+#define DMACH_PCM0_TX S3C64XX_DMA_CHAN("pcm0_tx")
+#define DMACH_PCM0_RX S3C64XX_DMA_CHAN("pcm0_rx")
+#define DMACH_I2S0_OUT S3C64XX_DMA_CHAN("i2s0_tx")
+#define DMACH_I2S0_IN S3C64XX_DMA_CHAN("i2s0_rx")
+#define DMACH_SPI0_TX S3C64XX_DMA_CHAN("spi0_tx")
+#define DMACH_SPI0_RX S3C64XX_DMA_CHAN("spi0_rx")
+#define DMACH_HSI_I2SV40_TX S3C64XX_DMA_CHAN("i2s2_tx")
+#define DMACH_HSI_I2SV40_RX S3C64XX_DMA_CHAN("i2s2_rx")
-/* Note, for the S3C64XX architecture we keep the DMACH_
- * defines in the order they are allocated to [S]DMA0/[S]DMA1
- * so that is easy to do DHACH_ -> DMA controller conversion
- */
+/* DMA1/SDMA1 */
+#define DMACH_PCM1_TX S3C64XX_DMA_CHAN("pcm1_tx")
+#define DMACH_PCM1_RX S3C64XX_DMA_CHAN("pcm1_rx")
+#define DMACH_I2S1_OUT S3C64XX_DMA_CHAN("i2s1_tx")
+#define DMACH_I2S1_IN S3C64XX_DMA_CHAN("i2s1_rx")
+#define DMACH_SPI1_TX S3C64XX_DMA_CHAN("spi1_tx")
+#define DMACH_SPI1_RX S3C64XX_DMA_CHAN("spi1_rx")
+#define DMACH_AC97_PCMOUT S3C64XX_DMA_CHAN("ac97_out")
+#define DMACH_AC97_PCMIN S3C64XX_DMA_CHAN("ac97_in")
+#define DMACH_AC97_MICIN S3C64XX_DMA_CHAN("ac97_mic")
+#define DMACH_PWM S3C64XX_DMA_CHAN("pwm")
+#define DMACH_IRDA S3C64XX_DMA_CHAN("irda")
+#define DMACH_EXTERNAL S3C64XX_DMA_CHAN("external")
+#define DMACH_SECURITY_RX S3C64XX_DMA_CHAN("sec_rx")
+#define DMACH_SECURITY_TX S3C64XX_DMA_CHAN("sec_tx")
+
enum dma_ch {
- /* DMA0/SDMA0 */
- DMACH_UART0 = 0,
- DMACH_UART0_SRC2,
- DMACH_UART1,
- DMACH_UART1_SRC2,
- DMACH_UART2,
- DMACH_UART2_SRC2,
- DMACH_UART3,
- DMACH_UART3_SRC2,
- DMACH_PCM0_TX,
- DMACH_PCM0_RX,
- DMACH_I2S0_OUT,
- DMACH_I2S0_IN,
- DMACH_SPI0_TX,
- DMACH_SPI0_RX,
- DMACH_HSI_I2SV40_TX,
- DMACH_HSI_I2SV40_RX,
+ DMACH_MAX = 32
+};
- /* DMA1/SDMA1 */
- DMACH_PCM1_TX = 16,
- DMACH_PCM1_RX,
- DMACH_I2S1_OUT,
- DMACH_I2S1_IN,
- DMACH_SPI1_TX,
- DMACH_SPI1_RX,
- DMACH_AC97_PCMOUT,
- DMACH_AC97_PCMIN,
- DMACH_AC97_MICIN,
- DMACH_PWM,
- DMACH_IRDA,
- DMACH_EXTERNAL,
- DMACH_RES1,
- DMACH_RES2,
- DMACH_SECURITY_RX, /* SDMA1 only */
- DMACH_SECURITY_TX, /* SDMA1 only */
- DMACH_MAX /* the end */
+struct s3c2410_dma_client {
+ char *name;
};
static inline bool samsung_dma_has_circular(void)
@@ -65,67 +62,10 @@
static inline bool samsung_dma_is_dmadev(void)
{
- return false;
+ return true;
}
-#define S3C2410_DMAF_CIRCULAR (1 << 0)
-#include <plat/dma.h>
-
-#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
-
-struct s3c64xx_dma_buff;
-
-/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
- * @next: Pointer to next buffer in queue or ring.
- * @pw: Client provided identifier
- * @lli: Pointer to hardware descriptor this buffer is associated with.
- * @lli_dma: Hardare address of the descriptor.
- */
-struct s3c64xx_dma_buff {
- struct s3c64xx_dma_buff *next;
-
- void *pw;
- struct pl080s_lli *lli;
- dma_addr_t lli_dma;
-};
-
-struct s3c64xx_dmac;
-
-struct s3c2410_dma_chan {
- unsigned char number; /* number of this dma channel */
- unsigned char in_use; /* channel allocated */
- unsigned char bit; /* bit for enable/disable/etc */
- unsigned char hw_width;
- unsigned char peripheral;
-
- unsigned int flags;
- enum dma_data_direction source;
-
-
- dma_addr_t dev_addr;
-
- struct s3c2410_dma_client *client;
- struct s3c64xx_dmac *dmac; /* pointer to controller */
-
- void __iomem *regs;
-
- /* cdriver callbacks */
- s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */
- s3c2410_dma_opfn_t op_fn; /* channel op callback */
-
- /* buffer list and information */
- struct s3c64xx_dma_buff *curr; /* current dma buffer */
- struct s3c64xx_dma_buff *next; /* next buffer to load */
- struct s3c64xx_dma_buff *end; /* end of queue */
-
- /* note, when channel is running in circular mode, curr is the
- * first buffer enqueued, end is the last and curr is where the
- * last buffer-done event is set-at. The buffers are not freed
- * and the last buffer hardware descriptor points back to the
- * first.
- */
-};
-
-#include <plat/dma-core.h>
+#include <linux/amba/pl08x.h>
+#include <plat/dma-ops.h>
#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c
new file mode 100644
index 0000000..901a984
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/pl080.c
@@ -0,0 +1,244 @@
+/*
+ * Samsung's S3C64XX generic DMA support using amba-pl08x driver.
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl080.h>
+#include <linux/amba/pl08x.h>
+#include <linux/of.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include "regs-sys.h"
+
+static int pl08x_get_xfer_signal(const struct pl08x_channel_data *cd)
+{
+ return cd->min_signal;
+}
+
+static void pl08x_put_xfer_signal(const struct pl08x_channel_data *cd, int ch)
+{
+}
+
+/*
+ * DMA0
+ */
+
+static struct pl08x_channel_data s3c64xx_dma0_info[] = {
+ {
+ .bus_id = "uart0_tx",
+ .min_signal = 0,
+ .max_signal = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart0_rx",
+ .min_signal = 1,
+ .max_signal = 1,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart1_tx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart1_rx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart2_tx",
+ .min_signal = 4,
+ .max_signal = 4,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart2_rx",
+ .min_signal = 5,
+ .max_signal = 5,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart3_tx",
+ .min_signal = 6,
+ .max_signal = 6,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart3_rx",
+ .min_signal = 7,
+ .max_signal = 7,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "pcm0_tx",
+ .min_signal = 8,
+ .max_signal = 8,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "pcm0_rx",
+ .min_signal = 9,
+ .max_signal = 9,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s0_tx",
+ .min_signal = 10,
+ .max_signal = 10,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s0_rx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "spi0_tx",
+ .min_signal = 12,
+ .max_signal = 12,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "spi0_rx",
+ .min_signal = 13,
+ .max_signal = 13,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s2_tx",
+ .min_signal = 14,
+ .max_signal = 14,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s2_rx",
+ .min_signal = 15,
+ .max_signal = 15,
+ .periph_buses = PL08X_AHB2,
+ }
+};
+
+struct pl08x_platform_data s3c64xx_dma0_plat_data = {
+ .memcpy_channel = {
+ .bus_id = "memcpy",
+ .cctl_memcpy =
+ (PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
+ PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT |
+ PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
+ PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT |
+ PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE |
+ PL080_CONTROL_PROT_SYS),
+ },
+ .lli_buses = PL08X_AHB1,
+ .mem_buses = PL08X_AHB1,
+ .get_xfer_signal = pl08x_get_xfer_signal,
+ .put_xfer_signal = pl08x_put_xfer_signal,
+ .slave_channels = s3c64xx_dma0_info,
+ .num_slave_channels = ARRAY_SIZE(s3c64xx_dma0_info),
+};
+
+static AMBA_AHB_DEVICE(s3c64xx_dma0, "dma-pl080s.0", 0,
+ 0x75000000, {IRQ_DMA0}, &s3c64xx_dma0_plat_data);
+
+/*
+ * DMA1
+ */
+
+static struct pl08x_channel_data s3c64xx_dma1_info[] = {
+ {
+ .bus_id = "pcm1_tx",
+ .min_signal = 0,
+ .max_signal = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "pcm1_rx",
+ .min_signal = 1,
+ .max_signal = 1,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s1_tx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s1_rx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "spi1_tx",
+ .min_signal = 4,
+ .max_signal = 4,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "spi1_rx",
+ .min_signal = 5,
+ .max_signal = 5,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ac97_out",
+ .min_signal = 6,
+ .max_signal = 6,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ac97_in",
+ .min_signal = 7,
+ .max_signal = 7,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ac97_mic",
+ .min_signal = 8,
+ .max_signal = 8,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "pwm",
+ .min_signal = 9,
+ .max_signal = 9,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "irda",
+ .min_signal = 10,
+ .max_signal = 10,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "external",
+ .min_signal = 11,
+ .max_signal = 11,
+ .periph_buses = PL08X_AHB2,
+ },
+};
+
+struct pl08x_platform_data s3c64xx_dma1_plat_data = {
+ .memcpy_channel = {
+ .bus_id = "memcpy",
+ .cctl_memcpy =
+ (PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
+ PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT |
+ PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
+ PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT |
+ PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE |
+ PL080_CONTROL_PROT_SYS),
+ },
+ .lli_buses = PL08X_AHB1,
+ .mem_buses = PL08X_AHB1,
+ .get_xfer_signal = pl08x_get_xfer_signal,
+ .put_xfer_signal = pl08x_put_xfer_signal,
+ .slave_channels = s3c64xx_dma1_info,
+ .num_slave_channels = ARRAY_SIZE(s3c64xx_dma1_info),
+};
+
+static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0,
+ 0x75100000, {IRQ_DMA1}, &s3c64xx_dma1_plat_data);
+
+static int __init s3c64xx_pl080_init(void)
+{
+ /* Set all DMA configuration to be DMA, not SDMA */
+ writel(0xffffff, S3C64XX_SDMA_SEL);
+
+ if (of_have_populated_dt())
+ return 0;
+
+ amba_device_register(&s3c64xx_dma0_device, &iomem_resource);
+ amba_device_register(&s3c64xx_dma1_device, &iomem_resource);
+
+ return 0;
+}
+arch_initcall(s3c64xx_pl080_init);
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 99a3590..ac07e87 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -1468,6 +1468,8 @@
pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
#if defined(CONFIG_PL330_DMA)
pd.filter = pl330_filter;
+#elif defined(CONFIG_S3C64XX_PL080)
+ pd.filter = pl08x_filter_id;
#elif defined(CONFIG_S3C24XX_DMAC)
pd.filter = s3c24xx_dma_filter;
#endif
@@ -1509,8 +1511,10 @@
pd.num_cs = num_cs;
pd.src_clk_nr = src_clk_nr;
pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio;
-#ifdef CONFIG_PL330_DMA
+#if defined(CONFIG_PL330_DMA)
pd.filter = pl330_filter;
+#elif defined(CONFIG_S3C64XX_PL080)
+ pd.filter = pl08x_filter_id;
#endif
s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1);
@@ -1550,8 +1554,10 @@
pd.num_cs = num_cs;
pd.src_clk_nr = src_clk_nr;
pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio;
-#ifdef CONFIG_PL330_DMA
+#if defined(CONFIG_PL330_DMA)
pd.filter = pl330_filter;
+#elif defined(CONFIG_S3C64XX_PL080)
+ pd.filter = pl08x_filter_id;
#endif
s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2);
diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c
index ec0d731..886326e 100644
--- a/arch/arm/plat-samsung/dma-ops.c
+++ b/arch/arm/plat-samsung/dma-ops.c
@@ -18,6 +18,12 @@
#include <mach/dma.h>
+#if defined(CONFIG_PL330_DMA)
+#define dma_filter pl330_filter
+#elif defined(CONFIG_S3C64XX_PL080)
+#define dma_filter pl08x_filter_id
+#endif
+
static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
struct samsung_dma_req *param,
struct device *dev, char *ch_name)
@@ -30,7 +36,7 @@
if (dev->of_node)
return (unsigned)dma_request_slave_channel(dev, ch_name);
else
- return (unsigned)dma_request_channel(mask, pl330_filter,
+ return (unsigned)dma_request_channel(mask, dma_filter,
(void *)dma_ch);
}
diff --git a/drivers/clk/samsung/clk-s3c64xx.c b/drivers/clk/samsung/clk-s3c64xx.c
index 7d2c842..8e27aee 100644
--- a/drivers/clk/samsung/clk-s3c64xx.c
+++ b/drivers/clk/samsung/clk-s3c64xx.c
@@ -331,8 +331,8 @@
ALIAS(HCLK_HSMMC1, "s3c-sdhci.1", "mmc_busclk.0"),
ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "hsmmc"),
ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "mmc_busclk.0"),
- ALIAS(HCLK_DMA1, NULL, "dma1"),
- ALIAS(HCLK_DMA0, NULL, "dma0"),
+ ALIAS(HCLK_DMA1, "dma-pl080s.1", "apb_pclk"),
+ ALIAS(HCLK_DMA0, "dma-pl080s.0", "apb_pclk"),
ALIAS(HCLK_CAMIF, "s3c-camif", "camif"),
ALIAS(HCLK_LCD, "s3c-fb", "lcd"),
ALIAS(PCLK_SPI1, "s3c6410-spi.1", "spi"),
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index eb1f1ef..e2dd2fb 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -395,7 +395,7 @@
config SPI_S3C64XX
tristate "Samsung S3C64XX series type SPI"
depends on PLAT_SAMSUNG
- select S3C64XX_DMA if ARCH_S3C64XX
+ select S3C64XX_PL080 if ARCH_S3C64XX
help
SPI driver for Samsung S3C64XX and newer SoCs.
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 37459df..27930fc 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -1,13 +1,22 @@
config SND_SOC_SAMSUNG
tristate "ASoC support for Samsung"
depends on PLAT_SAMSUNG
- select S3C64XX_DMA if ARCH_S3C64XX
- select S3C24XX_DMA if ARCH_S3C24XX
+ select S3C2410_DMA if ARCH_S3C24XX
+ select S3C64XX_PL080 if ARCH_S3C64XX
+ select SND_S3C_DMA if !ARCH_S3C24XX
+ select SND_S3C_DMA_LEGACY if ARCH_S3C24XX
+ select SND_SOC_GENERIC_DMAENGINE_PCM if !ARCH_S3C24XX
help
Say Y or M if you want to add support for codecs attached to
the Samsung SoCs' Audio interfaces. You will also need to
select the audio interfaces to support below.
+config SND_S3C_DMA
+ tristate
+
+config SND_S3C_DMA_LEGACY
+ tristate
+
config SND_S3C24XX_I2S
tristate
select S3C2410_DMA
diff --git a/sound/soc/samsung/Makefile b/sound/soc/samsung/Makefile
index 709f605..86715d8 100644
--- a/sound/soc/samsung/Makefile
+++ b/sound/soc/samsung/Makefile
@@ -1,5 +1,6 @@
# S3c24XX Platform Support
-snd-soc-s3c24xx-objs := dma.o
+snd-soc-s3c-dma-objs := dmaengine.o
+snd-soc-s3c-dma-legacy-objs := dma.o
snd-soc-idma-objs := idma.o
snd-soc-s3c24xx-i2s-objs := s3c24xx-i2s.o
snd-soc-s3c2412-i2s-objs := s3c2412-i2s.o
@@ -9,7 +10,8 @@
snd-soc-pcm-objs := pcm.o
snd-soc-i2s-objs := i2s.o
-obj-$(CONFIG_SND_SOC_SAMSUNG) += snd-soc-s3c24xx.o
+obj-$(CONFIG_SND_S3C_DMA) += snd-soc-s3c-dma.o
+obj-$(CONFIG_SND_S3C_DMA_LEGACY) += snd-soc-s3c-dma-legacy.o
obj-$(CONFIG_SND_S3C24XX_I2S) += snd-soc-s3c24xx-i2s.o
obj-$(CONFIG_SND_SAMSUNG_AC97) += snd-soc-ac97.o
obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd-soc-s3c2412-i2s.o
diff --git a/sound/soc/samsung/ac97.c b/sound/soc/samsung/ac97.c
index 350ba23..4a88e36 100644
--- a/sound/soc/samsung/ac97.c
+++ b/sound/soc/samsung/ac97.c
@@ -221,24 +221,6 @@
.reset = s3c_ac97_cold_reset,
};
-static int s3c_ac97_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params,
- struct snd_soc_dai *dai)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
- struct s3c_dma_params *dma_data;
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- dma_data = &s3c_ac97_pcm_out;
- else
- dma_data = &s3c_ac97_pcm_in;
-
- snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
-
- return 0;
-}
-
static int s3c_ac97_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *dai)
{
@@ -279,21 +261,6 @@
return 0;
}
-static int s3c_ac97_hw_mic_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params,
- struct snd_soc_dai *dai)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- return -ENODEV;
- else
- snd_soc_dai_set_dma_data(cpu_dai, substream, &s3c_ac97_mic_in);
-
- return 0;
-}
-
static int s3c_ac97_mic_trigger(struct snd_pcm_substream *substream,
int cmd, struct snd_soc_dai *dai)
{
@@ -329,15 +296,27 @@
}
static const struct snd_soc_dai_ops s3c_ac97_dai_ops = {
- .hw_params = s3c_ac97_hw_params,
.trigger = s3c_ac97_trigger,
};
static const struct snd_soc_dai_ops s3c_ac97_mic_dai_ops = {
- .hw_params = s3c_ac97_hw_mic_params,
.trigger = s3c_ac97_mic_trigger,
};
+static int s3c_ac97_dai_probe(struct snd_soc_dai *dai)
+{
+ samsung_asoc_init_dma_data(dai, &s3c_ac97_pcm_out, &s3c_ac97_pcm_in);
+
+ return 0;
+}
+
+static int s3c_ac97_mic_dai_probe(struct snd_soc_dai *dai)
+{
+ samsung_asoc_init_dma_data(dai, NULL, &s3c_ac97_mic_in);
+
+ return 0;
+}
+
static struct snd_soc_dai_driver s3c_ac97_dai[] = {
[S3C_AC97_DAI_PCM] = {
.name = "samsung-ac97",
@@ -354,6 +333,7 @@
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_48000,
.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .probe = s3c_ac97_dai_probe,
.ops = &s3c_ac97_dai_ops,
},
[S3C_AC97_DAI_MIC] = {
@@ -365,6 +345,7 @@
.channels_max = 1,
.rates = SNDRV_PCM_RATE_8000_48000,
.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .probe = s3c_ac97_mic_dai_probe,
.ops = &s3c_ac97_mic_dai_ops,
},
};
diff --git a/sound/soc/samsung/dma.c b/sound/soc/samsung/dma.c
index fe2748b..dc09b71 100644
--- a/sound/soc/samsung/dma.c
+++ b/sound/soc/samsung/dma.c
@@ -35,12 +35,6 @@
SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID,
- .formats = SNDRV_PCM_FMTBIT_S16_LE |
- SNDRV_PCM_FMTBIT_U16_LE |
- SNDRV_PCM_FMTBIT_U8 |
- SNDRV_PCM_FMTBIT_S8,
- .channels_min = 2,
- .channels_max = 2,
.buffer_bytes_max = 128*1024,
.period_bytes_min = PAGE_SIZE,
.period_bytes_max = PAGE_SIZE*2,
@@ -441,6 +435,14 @@
.pcm_free = dma_free_dma_buffers,
};
+void samsung_asoc_init_dma_data(struct snd_soc_dai *dai,
+ struct s3c_dma_params *playback,
+ struct s3c_dma_params *capture)
+{
+ snd_soc_dai_init_dma_data(dai, playback, capture);
+}
+EXPORT_SYMBOL_GPL(samsung_asoc_init_dma_data);
+
int samsung_asoc_dma_platform_register(struct device *dev)
{
return snd_soc_register_platform(dev, &samsung_asoc_platform);
diff --git a/sound/soc/samsung/dma.h b/sound/soc/samsung/dma.h
index 0e86315..225e537 100644
--- a/sound/soc/samsung/dma.h
+++ b/sound/soc/samsung/dma.h
@@ -12,6 +12,8 @@
#ifndef _S3C_AUDIO_H
#define _S3C_AUDIO_H
+#include <sound/dmaengine_pcm.h>
+
struct s3c_dma_params {
struct s3c2410_dma_client *client; /* stream identifier */
int channel; /* Channel ID */
@@ -20,8 +22,12 @@
unsigned ch;
struct samsung_dma_ops *ops;
char *ch_name;
+ struct snd_dmaengine_dai_dma_data dma_data;
};
+void samsung_asoc_init_dma_data(struct snd_soc_dai *dai,
+ struct s3c_dma_params *playback,
+ struct s3c_dma_params *capture);
int samsung_asoc_dma_platform_register(struct device *dev);
void samsung_asoc_dma_platform_unregister(struct device *dev);
diff --git a/sound/soc/samsung/dmaengine.c b/sound/soc/samsung/dmaengine.c
new file mode 100644
index 0000000..3be479d
--- /dev/null
+++ b/sound/soc/samsung/dmaengine.c
@@ -0,0 +1,84 @@
+/*
+ * dmaengine.c - Samsung dmaengine wrapper
+ *
+ * Author: Mark Brown <broonie@linaro.org>
+ * Copyright 2013 Linaro
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/amba/pl08x.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/dmaengine_pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+
+#include "dma.h"
+
+#ifdef CONFIG_ARCH_S3C64XX
+#define filter_fn pl08x_filter_id
+#else
+#define filter_fn NULL
+#endif
+
+static const struct snd_dmaengine_pcm_config samsung_dmaengine_pcm_config = {
+ .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
+ .compat_filter_fn = filter_fn,
+};
+
+void samsung_asoc_init_dma_data(struct snd_soc_dai *dai,
+ struct s3c_dma_params *playback,
+ struct s3c_dma_params *capture)
+{
+ struct snd_dmaengine_dai_dma_data *playback_data = NULL;
+ struct snd_dmaengine_dai_dma_data *capture_data = NULL;
+
+ if (playback) {
+ playback_data = &playback->dma_data;
+ playback_data->filter_data = (void *)playback->channel;
+ playback_data->chan_name = playback->ch_name;
+ playback_data->addr = playback->dma_addr;
+ playback_data->addr_width = playback->dma_size;
+ }
+ if (capture) {
+ capture_data = &capture->dma_data;
+ capture_data->filter_data = (void *)capture->channel;
+ capture_data->chan_name = capture->ch_name;
+ capture_data->addr = capture->dma_addr;
+ capture_data->addr_width = capture->dma_size;
+ }
+
+ snd_soc_dai_init_dma_data(dai, playback_data, capture_data);
+}
+EXPORT_SYMBOL_GPL(samsung_asoc_init_dma_data);
+
+int samsung_asoc_dma_platform_register(struct device *dev)
+{
+ return snd_dmaengine_pcm_register(dev, &samsung_dmaengine_pcm_config,
+ SND_DMAENGINE_PCM_FLAG_CUSTOM_CHANNEL_NAME |
+ SND_DMAENGINE_PCM_FLAG_NO_RESIDUE |
+ SND_DMAENGINE_PCM_FLAG_COMPAT);
+}
+EXPORT_SYMBOL_GPL(samsung_asoc_dma_platform_register);
+
+void samsung_asoc_dma_platform_unregister(struct device *dev)
+{
+ return snd_dmaengine_pcm_unregister(dev);
+}
+EXPORT_SYMBOL_GPL(samsung_asoc_dma_platform_unregister);
+
+MODULE_AUTHOR("Mark Brown <broonie@linaro.org>");
+MODULE_DESCRIPTION("Samsung dmaengine ASoC driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c
index a5cbdb4..92f64363 100644
--- a/sound/soc/samsung/i2s.c
+++ b/sound/soc/samsung/i2s.c
@@ -702,6 +702,8 @@
}
writel(mod, i2s->addr + I2SMOD);
+ samsung_asoc_init_dma_data(dai, &i2s->dma_playback, &i2s->dma_capture);
+
i2s->frmclk = params_rate(params);
return 0;
@@ -946,8 +948,11 @@
struct i2s_dai *i2s = to_info(dai);
struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
- if (other && other->clk) /* If this is probe on secondary */
+ if (other && other->clk) { /* If this is probe on secondary */
+ samsung_asoc_init_dma_data(dai, &other->sec_dai->dma_playback,
+ NULL);
goto probe_exit;
+ }
i2s->addr = ioremap(i2s->base, 0x100);
if (i2s->addr == NULL) {
@@ -963,7 +968,7 @@
}
clk_prepare_enable(i2s->clk);
- snd_soc_dai_init_dma_data(dai, &i2s->dma_playback, &i2s->dma_capture);
+ samsung_asoc_init_dma_data(dai, &i2s->dma_playback, &i2s->dma_capture);
if (other) {
other->addr = i2s->addr;
diff --git a/sound/soc/samsung/idma.c b/sound/soc/samsung/idma.c
index e4f318f..3d5cf15 100644
--- a/sound/soc/samsung/idma.c
+++ b/sound/soc/samsung/idma.c
@@ -35,14 +35,6 @@
SNDRV_PCM_INFO_MMAP_VALID |
SNDRV_PCM_INFO_PAUSE |
SNDRV_PCM_INFO_RESUME,
- .formats = SNDRV_PCM_FMTBIT_S16_LE |
- SNDRV_PCM_FMTBIT_U16_LE |
- SNDRV_PCM_FMTBIT_S24_LE |
- SNDRV_PCM_FMTBIT_U24_LE |
- SNDRV_PCM_FMTBIT_U8 |
- SNDRV_PCM_FMTBIT_S8,
- .channels_min = 2,
- .channels_max = 2,
.buffer_bytes_max = MAX_IDMA_BUFFER,
.period_bytes_min = 128,
.period_bytes_max = MAX_IDMA_PERIOD,
diff --git a/sound/soc/samsung/pcm.c b/sound/soc/samsung/pcm.c
index e54256f..6a5e4bf 100644
--- a/sound/soc/samsung/pcm.c
+++ b/sound/soc/samsung/pcm.c
@@ -275,7 +275,6 @@
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(rtd->cpu_dai);
- struct s3c_dma_params *dma_data;
void __iomem *regs = pcm->regs;
struct clk *clk;
int sclk_div, sync_div;
@@ -284,13 +283,6 @@
dev_dbg(pcm->dev, "Entered %s\n", __func__);
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- dma_data = pcm->dma_playback;
- else
- dma_data = pcm->dma_capture;
-
- snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_data);
-
/* Strictly check for sample size */
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
@@ -461,10 +453,20 @@
.set_fmt = s3c_pcm_set_fmt,
};
+static int s3c_pcm_dai_probe(struct snd_soc_dai *dai)
+{
+ struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(dai);
+
+ snd_soc_dai_init_dma_data(dai, pcm->dma_playback, pcm->dma_capture);
+
+ return 0;
+}
+
#define S3C_PCM_RATES SNDRV_PCM_RATE_8000_96000
#define S3C_PCM_DAI_DECLARE \
.symmetric_rates = 1, \
+ .probe = s3c_pcm_dai_probe, \
.ops = &s3c_pcm_dai_ops, \
.playback = { \
.channels_min = 2, \
diff --git a/sound/soc/samsung/regs-ac97.h b/sound/soc/samsung/regs-ac97.h
index c3878f7..a71be45 100644
--- a/sound/soc/samsung/regs-ac97.h
+++ b/sound/soc/samsung/regs-ac97.h
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-ac97.h
- *
+/*
* Copyright (c) 2006 Simtec Electronics <linux@simtec.co.uk>
* http://www.simtec.co.uk/products/SWLINUX/
*
@@ -10,8 +9,8 @@
* S3C2440 AC97 Controller
*/
-#ifndef __ASM_ARCH_REGS_AC97_H
-#define __ASM_ARCH_REGS_AC97_H __FILE__
+#ifndef __SAMSUNG_REGS_AC97_H__
+#define __SAMSUNG_REGS_AC97_H__
#define S3C_AC97_GLBCTRL (0x00)
@@ -64,4 +63,4 @@
#define S3C_AC97_PCM_DATA (0x18)
#define S3C_AC97_MIC_DATA (0x1C)
-#endif /* __ASM_ARCH_REGS_AC97_H */
+#endif /* __SAMSUNG_REGS_AC97_H__ */
diff --git a/sound/soc/samsung/regs-iis.h b/sound/soc/samsung/regs-iis.h
index a18d35e..dc6cbbe 100644
--- a/sound/soc/samsung/regs-iis.h
+++ b/sound/soc/samsung/regs-iis.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-samsung/include/plat/regs-iis.h
- *
+/*
* Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
* http://www.simtec.co.uk/products/SWLINUX/
*
@@ -10,8 +9,8 @@
* S3C2410 IIS register definition
*/
-#ifndef __ASM_ARCH_REGS_IIS_H
-#define __ASM_ARCH_REGS_IIS_H
+#ifndef __SAMSUNG_REGS_IIS_H__
+#define __SAMSUNG_REGS_IIS_H__
#define S3C2410_IISCON (0x00)
@@ -67,4 +66,4 @@
#define S3C2410_IISFIFO (0x10)
-#endif /* __ASM_ARCH_REGS_IIS_H */
+#endif /* __SAMSUNG_REGS_IIS_H__ */