diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 633ee43..e0e46f5 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -139,6 +139,18 @@
 	  This driver can be built as a module. If built as a module it will be
 	  called "da9055"
 
+config MFD_DA9063
+	bool "Dialog Semiconductor DA9063 PMIC Support"
+	select MFD_CORE
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	depends on I2C=y && GENERIC_HARDIRQS
+	help
+	  Say yes here for support for the Dialog Semiconductor DA9063 PMIC.
+	  This includes the I2C driver and core APIs.
+	  Additional drivers must be enabled in order to use the functionality
+	  of the device.
+
 config MFD_MC13783
 	tristate
 
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 3c90051..0bb84d5 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -107,6 +107,9 @@
 da9055-objs			:= da9055-core.o da9055-i2c.o
 obj-$(CONFIG_MFD_DA9055)	+= da9055.o
 
+da9063-objs			:= da9063-core.o da9063-i2c.o
+obj-$(CONFIG_MFD_DA9063)	+= da9063.o
+
 obj-$(CONFIG_MFD_MAX77686)	+= max77686.o max77686-irq.o
 obj-$(CONFIG_MFD_MAX77693)	+= max77693.o max77693-irq.o
 obj-$(CONFIG_MFD_MAX8907)	+= max8907.o
diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c
new file mode 100644
index 0000000..29f3ed1
--- /dev/null
+++ b/drivers/mfd/da9063-core.c
@@ -0,0 +1,129 @@
+/*
+ * da9063-core.c: Device access for Dialog DA9063 modules
+ *
+ * Copyright 2012 Dialog Semiconductors Ltd.
+ * Copyright 2013 Philipp Zabel, Pengutronix
+ *
+ * Author: Krystian Garbaciak <krystian.garbaciak@diasemi.com>,
+ *         Michal Hajduk <michal.hajduk@diasemi.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/mfd/core.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/da9063/core.h>
+#include <linux/mfd/da9063/pdata.h>
+#include <linux/mfd/da9063/registers.h>
+
+#include <linux/proc_fs.h>
+#include <linux/kthread.h>
+#include <linux/uaccess.h>
+
+
+static struct mfd_cell da9063_devs[] = {
+	{
+		.name		= DA9063_DRVNAME_REGULATORS,
+	},
+	{
+		.name		= DA9063_DRVNAME_LEDS,
+	},
+	{
+		.name		= DA9063_DRVNAME_WATCHDOG,
+	},
+	{
+		.name		= DA9063_DRVNAME_HWMON,
+	},
+	{
+		.name		= DA9063_DRVNAME_ONKEY,
+	},
+	{
+		.name		= DA9063_DRVNAME_RTC,
+	},
+	{
+		.name		= DA9063_DRVNAME_VIBRATION,
+	},
+};
+
+int da9063_device_init(struct da9063 *da9063, unsigned int irq)
+{
+	struct da9063_pdata *pdata = da9063->dev->platform_data;
+	int model, revision;
+	int ret;
+
+	if (pdata) {
+		da9063->flags = pdata->flags;
+		da9063->irq_base = pdata->irq_base;
+	} else {
+		da9063->flags = 0;
+		da9063->irq_base = 0;
+	}
+	da9063->chip_irq = irq;
+
+	if (pdata && pdata->init != NULL) {
+		ret = pdata->init(da9063);
+		if (ret != 0) {
+			dev_err(da9063->dev,
+				"Platform initialization failed.\n");
+			return ret;
+		}
+	}
+
+	ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_ID, &model);
+	if (ret < 0) {
+		dev_err(da9063->dev, "Cannot read chip model id.\n");
+		return -EIO;
+	}
+	if (model != PMIC_DA9063) {
+		dev_err(da9063->dev, "Invalid chip model id: 0x%02x\n", model);
+		return -ENODEV;
+	}
+
+	ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_VARIANT, &revision);
+	if (ret < 0) {
+		dev_err(da9063->dev, "Cannot read chip revision id.\n");
+		return -EIO;
+	}
+	revision >>= DA9063_CHIP_VARIANT_SHIFT;
+	if (revision != 3) {
+		dev_err(da9063->dev, "Unknown chip revision: %d\n", revision);
+		return -ENODEV;
+	}
+
+	da9063->model = model;
+	da9063->revision = revision;
+
+	dev_info(da9063->dev,
+		 "Device detected (model-ID: 0x%02X  rev-ID: 0x%02X)\n",
+		 model, revision);
+
+	ret = mfd_add_devices(da9063->dev, -1, da9063_devs,
+			      ARRAY_SIZE(da9063_devs), NULL, da9063->irq_base,
+			      NULL);
+	if (ret)
+		dev_err(da9063->dev, "Cannot add MFD cells\n");
+
+	return ret;
+}
+
+void da9063_device_exit(struct da9063 *da9063)
+{
+	mfd_remove_devices(da9063->dev);
+}
+
+MODULE_DESCRIPTION("PMIC driver for Dialog DA9063");
+MODULE_AUTHOR("Krystian Garbaciak <krystian.garbaciak@diasemi.com>, Michal Hajduk <michal.hajduk@diasemi.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/da9063-i2c.c b/drivers/mfd/da9063-i2c.c
new file mode 100644
index 0000000..8db5c805
--- /dev/null
+++ b/drivers/mfd/da9063-i2c.c
@@ -0,0 +1,182 @@
+/* da9063-i2c.c: Interrupt support for Dialog DA9063
+ *
+ * Copyright 2012 Dialog Semiconductor Ltd.
+ * Copyright 2013 Philipp Zabel, Pengutronix
+ *
+ * Author: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#include <linux/mfd/core.h>
+#include <linux/mfd/da9063/core.h>
+#include <linux/mfd/da9063/pdata.h>
+#include <linux/mfd/da9063/registers.h>
+
+static const struct regmap_range da9063_readable_ranges[] = {
+	{
+		.range_min = DA9063_REG_PAGE_CON,
+		.range_max = DA9063_REG_SECOND_D,
+	}, {
+		.range_min = DA9063_REG_SEQ,
+		.range_max = DA9063_REG_ID_32_31,
+	}, {
+		.range_min = DA9063_REG_SEQ_A,
+		.range_max = DA9063_REG_AUTO3_LOW,
+	}, {
+		.range_min = DA9063_REG_T_OFFSET,
+		.range_max = DA9063_REG_GP_ID_19,
+	}, {
+		.range_min = DA9063_REG_CHIP_ID,
+		.range_max = DA9063_REG_CHIP_VARIANT,
+	},
+};
+
+static const struct regmap_range da9063_writeable_ranges[] = {
+	{
+		.range_min = DA9063_REG_PAGE_CON,
+		.range_max = DA9063_REG_PAGE_CON,
+	}, {
+		.range_min = DA9063_REG_FAULT_LOG,
+		.range_max = DA9063_REG_VSYS_MON,
+	}, {
+		.range_min = DA9063_REG_COUNT_S,
+		.range_max = DA9063_REG_ALARM_Y,
+	}, {
+		.range_min = DA9063_REG_SEQ,
+		.range_max = DA9063_REG_ID_32_31,
+	}, {
+		.range_min = DA9063_REG_SEQ_A,
+		.range_max = DA9063_REG_AUTO3_LOW,
+	}, {
+		.range_min = DA9063_REG_CONFIG_I,
+		.range_max = DA9063_REG_MON_REG_4,
+	}, {
+		.range_min = DA9063_REG_GP_ID_0,
+		.range_max = DA9063_REG_GP_ID_19,
+	},
+};
+
+static const struct regmap_range da9063_volatile_ranges[] = {
+	{
+		.range_min = DA9063_REG_STATUS_A,
+		.range_max = DA9063_REG_EVENT_D,
+	}, {
+		.range_min = DA9063_REG_CONTROL_F,
+		.range_max = DA9063_REG_CONTROL_F,
+	}, {
+		.range_min = DA9063_REG_ADC_MAN,
+		.range_max = DA9063_REG_ADC_MAN,
+	}, {
+		.range_min = DA9063_REG_ADC_RES_L,
+		.range_max = DA9063_REG_SECOND_D,
+	}, {
+		.range_min = DA9063_REG_MON_REG_5,
+		.range_max = DA9063_REG_MON_REG_6,
+	},
+};
+
+static const struct regmap_access_table da9063_readable_table = {
+	.yes_ranges = da9063_readable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(da9063_readable_ranges),
+};
+
+static const struct regmap_access_table da9063_writeable_table = {
+	.yes_ranges = da9063_writeable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(da9063_writeable_ranges),
+};
+
+static const struct regmap_access_table da9063_volatile_table = {
+	.yes_ranges = da9063_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(da9063_volatile_ranges),
+};
+
+static const struct regmap_range_cfg da9063_range_cfg[] = {
+	{
+		.range_min = DA9063_REG_PAGE_CON,
+		.range_max = DA9063_REG_CHIP_VARIANT,
+		.selector_reg = DA9063_REG_PAGE_CON,
+		.selector_mask = 1 << DA9063_I2C_PAGE_SEL_SHIFT,
+		.selector_shift = DA9063_I2C_PAGE_SEL_SHIFT,
+		.window_start = 0,
+		.window_len = 256,
+	}
+};
+
+static struct regmap_config da9063_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.ranges = da9063_range_cfg,
+	.num_ranges = ARRAY_SIZE(da9063_range_cfg),
+	.max_register = DA9063_REG_CHIP_VARIANT,
+
+	.cache_type = REGCACHE_RBTREE,
+
+	.rd_table = &da9063_readable_table,
+	.wr_table = &da9063_writeable_table,
+	.volatile_table = &da9063_volatile_table,
+};
+
+static int da9063_i2c_probe(struct i2c_client *i2c,
+	const struct i2c_device_id *id)
+{
+	struct da9063 *da9063;
+	int ret;
+
+	da9063 = devm_kzalloc(&i2c->dev, sizeof(struct da9063), GFP_KERNEL);
+	if (da9063 == NULL)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, da9063);
+	da9063->dev = &i2c->dev;
+	da9063->chip_irq = i2c->irq;
+
+	da9063->regmap = devm_regmap_init_i2c(i2c, &da9063_regmap_config);
+	if (IS_ERR(da9063->regmap)) {
+		ret = PTR_ERR(da9063->regmap);
+		dev_err(da9063->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	return da9063_device_init(da9063, i2c->irq);
+}
+
+static int da9063_i2c_remove(struct i2c_client *i2c)
+{
+	struct da9063 *da9063 = i2c_get_clientdata(i2c);
+
+	da9063_device_exit(da9063);
+
+	return 0;
+}
+
+static const struct i2c_device_id da9063_i2c_id[] = {
+	{"da9063", PMIC_DA9063},
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, da9063_i2c_id);
+
+static struct i2c_driver da9063_i2c_driver = {
+	.driver = {
+		.name = "da9063",
+		.owner = THIS_MODULE,
+	},
+	.probe    = da9063_i2c_probe,
+	.remove   = da9063_i2c_remove,
+	.id_table = da9063_i2c_id,
+};
+
+module_i2c_driver(da9063_i2c_driver);
diff --git a/include/linux/mfd/da9063/core.h b/include/linux/mfd/da9063/core.h
new file mode 100644
index 0000000..ec2fd2a
--- /dev/null
+++ b/include/linux/mfd/da9063/core.h
@@ -0,0 +1,55 @@
+/*
+ * Definitions for DA9063 MFD driver
+ *
+ * Copyright 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: Michal Hajduk <michal.hajduk@diasemi.com>
+ *	   Krystian Garbaciak <krystian.garbaciak@diasemi.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_DA9063_CORE_H__
+#define __MFD_DA9063_CORE_H__
+
+#include <linux/interrupt.h>
+#include <linux/mfd/da9063/registers.h>
+
+/* DA9063 modules */
+#define DA9063_DRVNAME_CORE		"da9063-core"
+#define DA9063_DRVNAME_REGULATORS	"da9063-regulators"
+#define DA9063_DRVNAME_LEDS		"da9063-leds"
+#define DA9063_DRVNAME_WATCHDOG		"da9063-watchdog"
+#define DA9063_DRVNAME_HWMON		"da9063-hwmon"
+#define DA9063_DRVNAME_ONKEY		"da9063-onkey"
+#define DA9063_DRVNAME_RTC		"da9063-rtc"
+#define DA9063_DRVNAME_VIBRATION	"da9063-vibration"
+
+enum da9063_models {
+	PMIC_DA9063 = 0x61,
+};
+
+struct da9063 {
+	/* Device */
+	struct device	*dev;
+	unsigned short	model;
+	unsigned short	revision;
+	unsigned int	flags;
+
+	/* Control interface */
+	struct regmap	*regmap;
+
+	/* Interrupts */
+	int		chip_irq;
+	unsigned int	irq_base;
+};
+
+int da9063_device_init(struct da9063 *da9063, unsigned int irq);
+
+void da9063_device_exit(struct da9063 *da9063);
+
+#endif /* __MFD_DA9063_CORE_H__ */
diff --git a/include/linux/mfd/da9063/pdata.h b/include/linux/mfd/da9063/pdata.h
new file mode 100644
index 0000000..95c8742
--- /dev/null
+++ b/include/linux/mfd/da9063/pdata.h
@@ -0,0 +1,111 @@
+/*
+ * Platform configuration options for DA9063
+ *
+ * Copyright 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: Michal Hajduk <michal.hajduk@diasemi.com>
+ * Author: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_DA9063_PDATA_H__
+#define __MFD_DA9063_PDATA_H__
+
+#include <linux/regulator/machine.h>
+
+/*
+ * Regulator configuration
+ */
+/* DA9063 regulator IDs */
+enum {
+	/* BUCKs */
+	DA9063_ID_BCORE1,
+	DA9063_ID_BCORE2,
+	DA9063_ID_BPRO,
+	DA9063_ID_BMEM,
+	DA9063_ID_BIO,
+	DA9063_ID_BPERI,
+
+	/* BCORE1 and BCORE2 in merged mode */
+	DA9063_ID_BCORES_MERGED,
+	/* BMEM and BIO in merged mode */
+	DA9063_ID_BMEM_BIO_MERGED,
+	/* When two BUCKs are merged, they cannot be reused separately */
+
+	/* LDOs */
+	DA9063_ID_LDO1,
+	DA9063_ID_LDO2,
+	DA9063_ID_LDO3,
+	DA9063_ID_LDO4,
+	DA9063_ID_LDO5,
+	DA9063_ID_LDO6,
+	DA9063_ID_LDO7,
+	DA9063_ID_LDO8,
+	DA9063_ID_LDO9,
+	DA9063_ID_LDO10,
+	DA9063_ID_LDO11,
+};
+
+/* Regulators platform data */
+struct da9063_regulator_data {
+	int				id;
+	struct regulator_init_data	*initdata;
+};
+
+struct da9063_regulators_pdata {
+	unsigned			n_regulators;
+	struct da9063_regulator_data	*regulator_data;
+};
+
+
+/*
+ * RGB LED configuration
+ */
+/* LED IDs for flags in struct led_info. */
+enum {
+	DA9063_GPIO11_LED,
+	DA9063_GPIO14_LED,
+	DA9063_GPIO15_LED,
+
+	DA9063_LED_NUM
+};
+#define DA9063_LED_ID_MASK		0x3
+
+/* LED polarity for flags in struct led_info. */
+#define DA9063_LED_HIGH_LEVEL_ACTIVE	0x0
+#define DA9063_LED_LOW_LEVEL_ACTIVE	0x4
+
+
+/*
+ * General PMIC configuration
+ */
+/* HWMON ADC channels configuration */
+#define DA9063_FLG_FORCE_IN0_MANUAL_MODE	0x0010
+#define DA9063_FLG_FORCE_IN0_AUTO_MODE		0x0020
+#define DA9063_FLG_FORCE_IN1_MANUAL_MODE	0x0040
+#define DA9063_FLG_FORCE_IN1_AUTO_MODE		0x0080
+#define DA9063_FLG_FORCE_IN2_MANUAL_MODE	0x0100
+#define DA9063_FLG_FORCE_IN2_AUTO_MODE		0x0200
+#define DA9063_FLG_FORCE_IN3_MANUAL_MODE	0x0400
+#define DA9063_FLG_FORCE_IN3_AUTO_MODE		0x0800
+
+/* Disable register caching. */
+#define DA9063_FLG_NO_CACHE			0x0008
+
+struct da9063;
+
+/* DA9063 platform data */
+struct da9063_pdata {
+	int				(*init)(struct da9063 *da9063);
+	int				irq_base;
+	unsigned			flags;
+	struct da9063_regulators_pdata	*regulators_pdata;
+	struct led_platform_data	*leds_pdata;
+};
+
+#endif	/* __MFD_DA9063_PDATA_H__ */