| /* |
| * Copyright (c) 2008-2009 Atheros Communications Inc. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include "ath9k.h" |
| |
| static struct ieee80211_hw * ath_get_virt_hw(struct ath_softc *sc, |
| struct ieee80211_hdr *hdr) |
| { |
| struct ieee80211_hw *hw = sc->pri_wiphy->hw; |
| int i; |
| |
| spin_lock_bh(&sc->wiphy_lock); |
| for (i = 0; i < sc->num_sec_wiphy; i++) { |
| struct ath_wiphy *aphy = sc->sec_wiphy[i]; |
| if (aphy == NULL) |
| continue; |
| if (compare_ether_addr(hdr->addr1, aphy->hw->wiphy->perm_addr) |
| == 0) { |
| hw = aphy->hw; |
| break; |
| } |
| } |
| spin_unlock_bh(&sc->wiphy_lock); |
| return hw; |
| } |
| |
| /* |
| * Setup and link descriptors. |
| * |
| * 11N: we can no longer afford to self link the last descriptor. |
| * MAC acknowledges BA status as long as it copies frames to host |
| * buffer (or rx fifo). This can incorrectly acknowledge packets |
| * to a sender if last desc is self-linked. |
| */ |
| static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf) |
| { |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| struct ath_desc *ds; |
| struct sk_buff *skb; |
| |
| ATH_RXBUF_RESET(bf); |
| |
| ds = bf->bf_desc; |
| ds->ds_link = 0; /* link to null */ |
| ds->ds_data = bf->bf_buf_addr; |
| |
| /* virtual addr of the beginning of the buffer. */ |
| skb = bf->bf_mpdu; |
| BUG_ON(skb == NULL); |
| ds->ds_vdata = skb->data; |
| |
| /* |
| * setup rx descriptors. The rx_bufsize here tells the hardware |
| * how much data it can DMA to us and that we are prepared |
| * to process |
| */ |
| ath9k_hw_setuprxdesc(ah, ds, |
| common->rx_bufsize, |
| 0); |
| |
| if (sc->rx.rxlink == NULL) |
| ath9k_hw_putrxbuf(ah, bf->bf_daddr); |
| else |
| *sc->rx.rxlink = bf->bf_daddr; |
| |
| sc->rx.rxlink = &ds->ds_link; |
| ath9k_hw_rxena(ah); |
| } |
| |
| static void ath_setdefantenna(struct ath_softc *sc, u32 antenna) |
| { |
| /* XXX block beacon interrupts */ |
| ath9k_hw_setantenna(sc->sc_ah, antenna); |
| sc->rx.defant = antenna; |
| sc->rx.rxotherant = 0; |
| } |
| |
| static void ath_opmode_init(struct ath_softc *sc) |
| { |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| |
| u32 rfilt, mfilt[2]; |
| |
| /* configure rx filter */ |
| rfilt = ath_calcrxfilter(sc); |
| ath9k_hw_setrxfilter(ah, rfilt); |
| |
| /* configure bssid mask */ |
| if (ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK) |
| ath_hw_setbssidmask(common); |
| |
| /* configure operational mode */ |
| ath9k_hw_setopmode(ah); |
| |
| /* Handle any link-level address change. */ |
| ath9k_hw_setmac(ah, common->macaddr); |
| |
| /* calculate and install multicast filter */ |
| mfilt[0] = mfilt[1] = ~0; |
| ath9k_hw_setmcastfilter(ah, mfilt[0], mfilt[1]); |
| } |
| |
| int ath_rx_init(struct ath_softc *sc, int nbufs) |
| { |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| struct sk_buff *skb; |
| struct ath_buf *bf; |
| int error = 0; |
| |
| spin_lock_init(&sc->rx.rxflushlock); |
| sc->sc_flags &= ~SC_OP_RXFLUSH; |
| spin_lock_init(&sc->rx.rxbuflock); |
| |
| common->rx_bufsize = roundup(IEEE80211_MAX_MPDU_LEN, |
| min(common->cachelsz, (u16)64)); |
| |
| ath_print(common, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n", |
| common->cachelsz, common->rx_bufsize); |
| |
| /* Initialize rx descriptors */ |
| |
| error = ath_descdma_setup(sc, &sc->rx.rxdma, &sc->rx.rxbuf, |
| "rx", nbufs, 1); |
| if (error != 0) { |
| ath_print(common, ATH_DBG_FATAL, |
| "failed to allocate rx descriptors: %d\n", error); |
| goto err; |
| } |
| |
| list_for_each_entry(bf, &sc->rx.rxbuf, list) { |
| skb = ath_rxbuf_alloc(common, common->rx_bufsize, GFP_KERNEL); |
| if (skb == NULL) { |
| error = -ENOMEM; |
| goto err; |
| } |
| |
| bf->bf_mpdu = skb; |
| bf->bf_buf_addr = dma_map_single(sc->dev, skb->data, |
| common->rx_bufsize, |
| DMA_FROM_DEVICE); |
| if (unlikely(dma_mapping_error(sc->dev, |
| bf->bf_buf_addr))) { |
| dev_kfree_skb_any(skb); |
| bf->bf_mpdu = NULL; |
| ath_print(common, ATH_DBG_FATAL, |
| "dma_mapping_error() on RX init\n"); |
| error = -ENOMEM; |
| goto err; |
| } |
| bf->bf_dmacontext = bf->bf_buf_addr; |
| } |
| sc->rx.rxlink = NULL; |
| |
| err: |
| if (error) |
| ath_rx_cleanup(sc); |
| |
| return error; |
| } |
| |
| void ath_rx_cleanup(struct ath_softc *sc) |
| { |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| struct sk_buff *skb; |
| struct ath_buf *bf; |
| |
| list_for_each_entry(bf, &sc->rx.rxbuf, list) { |
| skb = bf->bf_mpdu; |
| if (skb) { |
| dma_unmap_single(sc->dev, bf->bf_buf_addr, |
| common->rx_bufsize, DMA_FROM_DEVICE); |
| dev_kfree_skb(skb); |
| } |
| } |
| |
| if (sc->rx.rxdma.dd_desc_len != 0) |
| ath_descdma_cleanup(sc, &sc->rx.rxdma, &sc->rx.rxbuf); |
| } |
| |
| /* |
| * Calculate the receive filter according to the |
| * operating mode and state: |
| * |
| * o always accept unicast, broadcast, and multicast traffic |
| * o maintain current state of phy error reception (the hal |
| * may enable phy error frames for noise immunity work) |
| * o probe request frames are accepted only when operating in |
| * hostap, adhoc, or monitor modes |
| * o enable promiscuous mode according to the interface state |
| * o accept beacons: |
| * - when operating in adhoc mode so the 802.11 layer creates |
| * node table entries for peers, |
| * - when operating in station mode for collecting rssi data when |
| * the station is otherwise quiet, or |
| * - when operating as a repeater so we see repeater-sta beacons |
| * - when scanning |
| */ |
| |
| u32 ath_calcrxfilter(struct ath_softc *sc) |
| { |
| #define RX_FILTER_PRESERVE (ATH9K_RX_FILTER_PHYERR | ATH9K_RX_FILTER_PHYRADAR) |
| |
| u32 rfilt; |
| |
| rfilt = (ath9k_hw_getrxfilter(sc->sc_ah) & RX_FILTER_PRESERVE) |
| | ATH9K_RX_FILTER_UCAST | ATH9K_RX_FILTER_BCAST |
| | ATH9K_RX_FILTER_MCAST; |
| |
| /* If not a STA, enable processing of Probe Requests */ |
| if (sc->sc_ah->opmode != NL80211_IFTYPE_STATION) |
| rfilt |= ATH9K_RX_FILTER_PROBEREQ; |
| |
| /* |
| * Set promiscuous mode when FIF_PROMISC_IN_BSS is enabled for station |
| * mode interface or when in monitor mode. AP mode does not need this |
| * since it receives all in-BSS frames anyway. |
| */ |
| if (((sc->sc_ah->opmode != NL80211_IFTYPE_AP) && |
| (sc->rx.rxfilter & FIF_PROMISC_IN_BSS)) || |
| (sc->sc_ah->opmode == NL80211_IFTYPE_MONITOR)) |
| rfilt |= ATH9K_RX_FILTER_PROM; |
| |
| if (sc->rx.rxfilter & FIF_CONTROL) |
| rfilt |= ATH9K_RX_FILTER_CONTROL; |
| |
| if ((sc->sc_ah->opmode == NL80211_IFTYPE_STATION) && |
| !(sc->rx.rxfilter & FIF_BCN_PRBRESP_PROMISC)) |
| rfilt |= ATH9K_RX_FILTER_MYBEACON; |
| else |
| rfilt |= ATH9K_RX_FILTER_BEACON; |
| |
| if ((AR_SREV_9280_10_OR_LATER(sc->sc_ah) || |
| AR_SREV_9285_10_OR_LATER(sc->sc_ah)) && |
| (sc->sc_ah->opmode == NL80211_IFTYPE_AP) && |
| (sc->rx.rxfilter & FIF_PSPOLL)) |
| rfilt |= ATH9K_RX_FILTER_PSPOLL; |
| |
| if (conf_is_ht(&sc->hw->conf)) |
| rfilt |= ATH9K_RX_FILTER_COMP_BAR; |
| |
| if (sc->sec_wiphy || (sc->rx.rxfilter & FIF_OTHER_BSS)) { |
| /* TODO: only needed if more than one BSSID is in use in |
| * station/adhoc mode */ |
| /* The following may also be needed for other older chips */ |
| if (sc->sc_ah->hw_version.macVersion == AR_SREV_VERSION_9160) |
| rfilt |= ATH9K_RX_FILTER_PROM; |
| rfilt |= ATH9K_RX_FILTER_MCAST_BCAST_ALL; |
| } |
| |
| return rfilt; |
| |
| #undef RX_FILTER_PRESERVE |
| } |
| |
| int ath_startrecv(struct ath_softc *sc) |
| { |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_buf *bf, *tbf; |
| |
| spin_lock_bh(&sc->rx.rxbuflock); |
| if (list_empty(&sc->rx.rxbuf)) |
| goto start_recv; |
| |
| sc->rx.rxlink = NULL; |
| list_for_each_entry_safe(bf, tbf, &sc->rx.rxbuf, list) { |
| ath_rx_buf_link(sc, bf); |
| } |
| |
| /* We could have deleted elements so the list may be empty now */ |
| if (list_empty(&sc->rx.rxbuf)) |
| goto start_recv; |
| |
| bf = list_first_entry(&sc->rx.rxbuf, struct ath_buf, list); |
| ath9k_hw_putrxbuf(ah, bf->bf_daddr); |
| ath9k_hw_rxena(ah); |
| |
| start_recv: |
| spin_unlock_bh(&sc->rx.rxbuflock); |
| ath_opmode_init(sc); |
| ath9k_hw_startpcureceive(ah); |
| |
| return 0; |
| } |
| |
| bool ath_stoprecv(struct ath_softc *sc) |
| { |
| struct ath_hw *ah = sc->sc_ah; |
| bool stopped; |
| |
| ath9k_hw_stoppcurecv(ah); |
| ath9k_hw_setrxfilter(ah, 0); |
| stopped = ath9k_hw_stopdmarecv(ah); |
| sc->rx.rxlink = NULL; |
| |
| return stopped; |
| } |
| |
| void ath_flushrecv(struct ath_softc *sc) |
| { |
| spin_lock_bh(&sc->rx.rxflushlock); |
| sc->sc_flags |= SC_OP_RXFLUSH; |
| ath_rx_tasklet(sc, 1); |
| sc->sc_flags &= ~SC_OP_RXFLUSH; |
| spin_unlock_bh(&sc->rx.rxflushlock); |
| } |
| |
| static bool ath_beacon_dtim_pending_cab(struct sk_buff *skb) |
| { |
| /* Check whether the Beacon frame has DTIM indicating buffered bc/mc */ |
| struct ieee80211_mgmt *mgmt; |
| u8 *pos, *end, id, elen; |
| struct ieee80211_tim_ie *tim; |
| |
| mgmt = (struct ieee80211_mgmt *)skb->data; |
| pos = mgmt->u.beacon.variable; |
| end = skb->data + skb->len; |
| |
| while (pos + 2 < end) { |
| id = *pos++; |
| elen = *pos++; |
| if (pos + elen > end) |
| break; |
| |
| if (id == WLAN_EID_TIM) { |
| if (elen < sizeof(*tim)) |
| break; |
| tim = (struct ieee80211_tim_ie *) pos; |
| if (tim->dtim_count != 0) |
| break; |
| return tim->bitmap_ctrl & 0x01; |
| } |
| |
| pos += elen; |
| } |
| |
| return false; |
| } |
| |
| static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb) |
| { |
| struct ieee80211_mgmt *mgmt; |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| |
| if (skb->len < 24 + 8 + 2 + 2) |
| return; |
| |
| mgmt = (struct ieee80211_mgmt *)skb->data; |
| if (memcmp(common->curbssid, mgmt->bssid, ETH_ALEN) != 0) |
| return; /* not from our current AP */ |
| |
| sc->ps_flags &= ~PS_WAIT_FOR_BEACON; |
| |
| if (sc->ps_flags & PS_BEACON_SYNC) { |
| sc->ps_flags &= ~PS_BEACON_SYNC; |
| ath_print(common, ATH_DBG_PS, |
| "Reconfigure Beacon timers based on " |
| "timestamp from the AP\n"); |
| ath_beacon_config(sc, NULL); |
| } |
| |
| if (ath_beacon_dtim_pending_cab(skb)) { |
| /* |
| * Remain awake waiting for buffered broadcast/multicast |
| * frames. If the last broadcast/multicast frame is not |
| * received properly, the next beacon frame will work as |
| * a backup trigger for returning into NETWORK SLEEP state, |
| * so we are waiting for it as well. |
| */ |
| ath_print(common, ATH_DBG_PS, "Received DTIM beacon indicating " |
| "buffered broadcast/multicast frame(s)\n"); |
| sc->ps_flags |= PS_WAIT_FOR_CAB | PS_WAIT_FOR_BEACON; |
| return; |
| } |
| |
| if (sc->ps_flags & PS_WAIT_FOR_CAB) { |
| /* |
| * This can happen if a broadcast frame is dropped or the AP |
| * fails to send a frame indicating that all CAB frames have |
| * been delivered. |
| */ |
| sc->ps_flags &= ~PS_WAIT_FOR_CAB; |
| ath_print(common, ATH_DBG_PS, |
| "PS wait for CAB frames timed out\n"); |
| } |
| } |
| |
| static void ath_rx_ps(struct ath_softc *sc, struct sk_buff *skb) |
| { |
| struct ieee80211_hdr *hdr; |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| |
| hdr = (struct ieee80211_hdr *)skb->data; |
| |
| /* Process Beacon and CAB receive in PS state */ |
| if ((sc->ps_flags & PS_WAIT_FOR_BEACON) && |
| ieee80211_is_beacon(hdr->frame_control)) |
| ath_rx_ps_beacon(sc, skb); |
| else if ((sc->ps_flags & PS_WAIT_FOR_CAB) && |
| (ieee80211_is_data(hdr->frame_control) || |
| ieee80211_is_action(hdr->frame_control)) && |
| is_multicast_ether_addr(hdr->addr1) && |
| !ieee80211_has_moredata(hdr->frame_control)) { |
| /* |
| * No more broadcast/multicast frames to be received at this |
| * point. |
| */ |
| sc->ps_flags &= ~PS_WAIT_FOR_CAB; |
| ath_print(common, ATH_DBG_PS, |
| "All PS CAB frames received, back to sleep\n"); |
| } else if ((sc->ps_flags & PS_WAIT_FOR_PSPOLL_DATA) && |
| !is_multicast_ether_addr(hdr->addr1) && |
| !ieee80211_has_morefrags(hdr->frame_control)) { |
| sc->ps_flags &= ~PS_WAIT_FOR_PSPOLL_DATA; |
| ath_print(common, ATH_DBG_PS, |
| "Going back to sleep after having received " |
| "PS-Poll data (0x%lx)\n", |
| sc->ps_flags & (PS_WAIT_FOR_BEACON | |
| PS_WAIT_FOR_CAB | |
| PS_WAIT_FOR_PSPOLL_DATA | |
| PS_WAIT_FOR_TX_ACK)); |
| } |
| } |
| |
| static void ath_rx_send_to_mac80211(struct ieee80211_hw *hw, |
| struct ath_softc *sc, struct sk_buff *skb, |
| struct ieee80211_rx_status *rxs) |
| { |
| struct ieee80211_hdr *hdr; |
| |
| hdr = (struct ieee80211_hdr *)skb->data; |
| |
| /* Send the frame to mac80211 */ |
| if (is_multicast_ether_addr(hdr->addr1)) { |
| int i; |
| /* |
| * Deliver broadcast/multicast frames to all suitable |
| * virtual wiphys. |
| */ |
| /* TODO: filter based on channel configuration */ |
| for (i = 0; i < sc->num_sec_wiphy; i++) { |
| struct ath_wiphy *aphy = sc->sec_wiphy[i]; |
| struct sk_buff *nskb; |
| if (aphy == NULL) |
| continue; |
| nskb = skb_copy(skb, GFP_ATOMIC); |
| if (!nskb) |
| continue; |
| ieee80211_rx(aphy->hw, nskb); |
| } |
| ieee80211_rx(sc->hw, skb); |
| } else |
| /* Deliver unicast frames based on receiver address */ |
| ieee80211_rx(hw, skb); |
| } |
| |
| int ath_rx_tasklet(struct ath_softc *sc, int flush) |
| { |
| #define PA2DESC(_sc, _pa) \ |
| ((struct ath_desc *)((caddr_t)(_sc)->rx.rxdma.dd_desc + \ |
| ((_pa) - (_sc)->rx.rxdma.dd_desc_paddr))) |
| |
| struct ath_buf *bf; |
| struct ath_desc *ds; |
| struct ath_rx_status *rx_stats; |
| struct sk_buff *skb = NULL, *requeue_skb; |
| struct ieee80211_rx_status *rxs; |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| /* |
| * The hw can techncically differ from common->hw when using ath9k |
| * virtual wiphy so to account for that we iterate over the active |
| * wiphys and find the appropriate wiphy and therefore hw. |
| */ |
| struct ieee80211_hw *hw = NULL; |
| struct ieee80211_hdr *hdr; |
| int retval; |
| bool decrypt_error = false; |
| |
| spin_lock_bh(&sc->rx.rxbuflock); |
| |
| do { |
| /* If handling rx interrupt and flush is in progress => exit */ |
| if ((sc->sc_flags & SC_OP_RXFLUSH) && (flush == 0)) |
| break; |
| |
| if (list_empty(&sc->rx.rxbuf)) { |
| sc->rx.rxlink = NULL; |
| break; |
| } |
| |
| bf = list_first_entry(&sc->rx.rxbuf, struct ath_buf, list); |
| ds = bf->bf_desc; |
| rx_stats = &ds->ds_us.rx; |
| |
| /* |
| * Must provide the virtual address of the current |
| * descriptor, the physical address, and the virtual |
| * address of the next descriptor in the h/w chain. |
| * This allows the HAL to look ahead to see if the |
| * hardware is done with a descriptor by checking the |
| * done bit in the following descriptor and the address |
| * of the current descriptor the DMA engine is working |
| * on. All this is necessary because of our use of |
| * a self-linked list to avoid rx overruns. |
| */ |
| retval = ath9k_hw_rxprocdesc(ah, ds, rx_stats, 0); |
| if (retval == -EINPROGRESS) { |
| struct ath_buf *tbf; |
| struct ath_desc *tds; |
| |
| if (list_is_last(&bf->list, &sc->rx.rxbuf)) { |
| sc->rx.rxlink = NULL; |
| break; |
| } |
| |
| tbf = list_entry(bf->list.next, struct ath_buf, list); |
| |
| /* |
| * On some hardware the descriptor status words could |
| * get corrupted, including the done bit. Because of |
| * this, check if the next descriptor's done bit is |
| * set or not. |
| * |
| * If the next descriptor's done bit is set, the current |
| * descriptor has been corrupted. Force s/w to discard |
| * this descriptor and continue... |
| */ |
| |
| tds = tbf->bf_desc; |
| retval = ath9k_hw_rxprocdesc(ah, tds, &tds->ds_us.rx, 0); |
| if (retval == -EINPROGRESS) { |
| break; |
| } |
| } |
| |
| skb = bf->bf_mpdu; |
| if (!skb) |
| continue; |
| |
| /* |
| * Synchronize the DMA transfer with CPU before |
| * 1. accessing the frame |
| * 2. requeueing the same buffer to h/w |
| */ |
| dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr, |
| common->rx_bufsize, |
| DMA_FROM_DEVICE); |
| |
| hdr = (struct ieee80211_hdr *) skb->data; |
| rxs = IEEE80211_SKB_RXCB(skb); |
| |
| hw = ath_get_virt_hw(sc, hdr); |
| |
| ath_debug_stat_rx(sc, rx_stats); |
| |
| /* |
| * If we're asked to flush receive queue, directly |
| * chain it back at the queue without processing it. |
| */ |
| if (flush) |
| goto requeue; |
| |
| retval = ath9k_cmn_rx_skb_preprocess(common, hw, skb, rx_stats, |
| rxs, &decrypt_error); |
| if (retval) |
| goto requeue; |
| |
| /* Ensure we always have an skb to requeue once we are done |
| * processing the current buffer's skb */ |
| requeue_skb = ath_rxbuf_alloc(common, common->rx_bufsize, GFP_ATOMIC); |
| |
| /* If there is no memory we ignore the current RX'd frame, |
| * tell hardware it can give us a new frame using the old |
| * skb and put it at the tail of the sc->rx.rxbuf list for |
| * processing. */ |
| if (!requeue_skb) |
| goto requeue; |
| |
| /* Unmap the frame */ |
| dma_unmap_single(sc->dev, bf->bf_buf_addr, |
| common->rx_bufsize, |
| DMA_FROM_DEVICE); |
| |
| skb_put(skb, rx_stats->rs_datalen); |
| |
| ath9k_cmn_rx_skb_postprocess(common, skb, rx_stats, |
| rxs, decrypt_error); |
| |
| /* We will now give hardware our shiny new allocated skb */ |
| bf->bf_mpdu = requeue_skb; |
| bf->bf_buf_addr = dma_map_single(sc->dev, requeue_skb->data, |
| common->rx_bufsize, |
| DMA_FROM_DEVICE); |
| if (unlikely(dma_mapping_error(sc->dev, |
| bf->bf_buf_addr))) { |
| dev_kfree_skb_any(requeue_skb); |
| bf->bf_mpdu = NULL; |
| ath_print(common, ATH_DBG_FATAL, |
| "dma_mapping_error() on RX\n"); |
| ath_rx_send_to_mac80211(hw, sc, skb, rxs); |
| break; |
| } |
| bf->bf_dmacontext = bf->bf_buf_addr; |
| |
| /* |
| * change the default rx antenna if rx diversity chooses the |
| * other antenna 3 times in a row. |
| */ |
| if (sc->rx.defant != rx_stats->rs_antenna) { |
| if (++sc->rx.rxotherant >= 3) |
| ath_setdefantenna(sc, rx_stats->rs_antenna); |
| } else { |
| sc->rx.rxotherant = 0; |
| } |
| |
| if (unlikely(sc->ps_flags & (PS_WAIT_FOR_BEACON | |
| PS_WAIT_FOR_CAB | |
| PS_WAIT_FOR_PSPOLL_DATA))) |
| ath_rx_ps(sc, skb); |
| |
| ath_rx_send_to_mac80211(hw, sc, skb, rxs); |
| |
| requeue: |
| list_move_tail(&bf->list, &sc->rx.rxbuf); |
| ath_rx_buf_link(sc, bf); |
| } while (1); |
| |
| spin_unlock_bh(&sc->rx.rxbuflock); |
| |
| return 0; |
| #undef PA2DESC |
| } |