| /* |
| * Copyright (C) 1995,2001 Compaq Computer Corporation |
| * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) |
| * Copyright (C) 2001 IBM Corp. |
| * Copyright (C) 2003-2004 Intel Corporation |
| * (c) Copyright 2009 Hewlett-Packard Development Company, L.P. |
| * |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for more |
| * details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/pci_hotplug.h> |
| |
| static struct hpp_type0 pci_default_type0 = { |
| .revision = 1, |
| .cache_line_size = 8, |
| .latency_timer = 0x40, |
| .enable_serr = 0, |
| .enable_perr = 0, |
| }; |
| |
| static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp) |
| { |
| u16 pci_cmd, pci_bctl; |
| |
| if (!hpp) { |
| /* |
| * Perhaps we *should* use default settings for PCIe, but |
| * pciehp didn't, so we won't either. |
| */ |
| if (pci_is_pcie(dev)) |
| return; |
| dev_info(&dev->dev, "using default PCI settings\n"); |
| hpp = &pci_default_type0; |
| } |
| |
| if (hpp->revision > 1) { |
| dev_warn(&dev->dev, |
| "PCI settings rev %d not supported; using defaults\n", |
| hpp->revision); |
| hpp = &pci_default_type0; |
| } |
| |
| pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp->cache_line_size); |
| pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp->latency_timer); |
| pci_read_config_word(dev, PCI_COMMAND, &pci_cmd); |
| if (hpp->enable_serr) |
| pci_cmd |= PCI_COMMAND_SERR; |
| else |
| pci_cmd &= ~PCI_COMMAND_SERR; |
| if (hpp->enable_perr) |
| pci_cmd |= PCI_COMMAND_PARITY; |
| else |
| pci_cmd &= ~PCI_COMMAND_PARITY; |
| pci_write_config_word(dev, PCI_COMMAND, pci_cmd); |
| |
| /* Program bridge control value */ |
| if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { |
| pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, |
| hpp->latency_timer); |
| pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl); |
| if (hpp->enable_serr) |
| pci_bctl |= PCI_BRIDGE_CTL_SERR; |
| else |
| pci_bctl &= ~PCI_BRIDGE_CTL_SERR; |
| if (hpp->enable_perr) |
| pci_bctl |= PCI_BRIDGE_CTL_PARITY; |
| else |
| pci_bctl &= ~PCI_BRIDGE_CTL_PARITY; |
| pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl); |
| } |
| } |
| |
| static void program_hpp_type1(struct pci_dev *dev, struct hpp_type1 *hpp) |
| { |
| if (hpp) |
| dev_warn(&dev->dev, "PCI-X settings not supported\n"); |
| } |
| |
| static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp) |
| { |
| int pos; |
| u16 reg16; |
| u32 reg32; |
| |
| if (!hpp) |
| return; |
| |
| /* Find PCI Express capability */ |
| pos = pci_pcie_cap(dev); |
| if (!pos) |
| return; |
| |
| if (hpp->revision > 1) { |
| dev_warn(&dev->dev, "PCIe settings rev %d not supported\n", |
| hpp->revision); |
| return; |
| } |
| |
| /* Initialize Device Control Register */ |
| pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, ®16); |
| reg16 = (reg16 & hpp->pci_exp_devctl_and) | hpp->pci_exp_devctl_or; |
| pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, reg16); |
| |
| /* Initialize Link Control Register */ |
| if (dev->subordinate) { |
| pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, ®16); |
| reg16 = (reg16 & hpp->pci_exp_lnkctl_and) |
| | hpp->pci_exp_lnkctl_or; |
| pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, reg16); |
| } |
| |
| /* Find Advanced Error Reporting Enhanced Capability */ |
| pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); |
| if (!pos) |
| return; |
| |
| /* Initialize Uncorrectable Error Mask Register */ |
| pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, ®32); |
| reg32 = (reg32 & hpp->unc_err_mask_and) | hpp->unc_err_mask_or; |
| pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, reg32); |
| |
| /* Initialize Uncorrectable Error Severity Register */ |
| pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, ®32); |
| reg32 = (reg32 & hpp->unc_err_sever_and) | hpp->unc_err_sever_or; |
| pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, reg32); |
| |
| /* Initialize Correctable Error Mask Register */ |
| pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, ®32); |
| reg32 = (reg32 & hpp->cor_err_mask_and) | hpp->cor_err_mask_or; |
| pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg32); |
| |
| /* Initialize Advanced Error Capabilities and Control Register */ |
| pci_read_config_dword(dev, pos + PCI_ERR_CAP, ®32); |
| reg32 = (reg32 & hpp->adv_err_cap_and) | hpp->adv_err_cap_or; |
| pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32); |
| |
| /* |
| * FIXME: The following two registers are not supported yet. |
| * |
| * o Secondary Uncorrectable Error Severity Register |
| * o Secondary Uncorrectable Error Mask Register |
| */ |
| } |
| |
| void pci_configure_slot(struct pci_dev *dev) |
| { |
| struct pci_dev *cdev; |
| struct hotplug_params hpp; |
| int ret; |
| |
| if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL || |
| (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && |
| (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI))) |
| return; |
| |
| pcie_bus_configure_settings(dev->bus, dev->bus->self->pcie_mpss); |
| |
| memset(&hpp, 0, sizeof(hpp)); |
| ret = pci_get_hp_params(dev, &hpp); |
| if (ret) |
| dev_warn(&dev->dev, "no hotplug settings from platform\n"); |
| |
| program_hpp_type2(dev, hpp.t2); |
| program_hpp_type1(dev, hpp.t1); |
| program_hpp_type0(dev, hpp.t0); |
| |
| if (dev->subordinate) { |
| list_for_each_entry(cdev, &dev->subordinate->devices, |
| bus_list) |
| pci_configure_slot(cdev); |
| } |
| } |
| EXPORT_SYMBOL_GPL(pci_configure_slot); |