crypto: caam - Add support for the Freescale SEC4/CAAM
The SEC4 supercedes the SEC2.x/3.x as Freescale's
Integrated Security Engine. Its programming model is
incompatible with all prior versions of the SEC (talitos).
The SEC4 is also known as the Cryptographic Accelerator
and Assurance Module (CAAM); this driver is named caam.
This initial submission does not include support for Data Path
mode operation - AEAD descriptors are submitted via the job
ring interface, while the Queue Interface (QI) is enabled
for use by others. Only AEAD algorithms are implemented
at this time, for use with IPsec.
Many thanks to the Freescale STC team for their contributions
to this driver.
Signed-off-by: Steve Cornelius <sec@pobox.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
diff --git a/drivers/crypto/caam/error.c b/drivers/crypto/caam/error.c
new file mode 100644
index 0000000..bd57a68
--- /dev/null
+++ b/drivers/crypto/caam/error.c
@@ -0,0 +1,248 @@
+/*
+ * CAAM Error Reporting
+ *
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ */
+
+#include "compat.h"
+#include "regs.h"
+#include "intern.h"
+#include "desc.h"
+#include "jr.h"
+#include "error.h"
+
+#define SPRINTFCAT(str, format, param, max_alloc) \
+{ \
+ char *tmp; \
+ \
+ tmp = kmalloc(sizeof(format) + max_alloc, GFP_ATOMIC); \
+ sprintf(tmp, format, param); \
+ strcat(str, tmp); \
+ kfree(tmp); \
+}
+
+static void report_jump_idx(u32 status, char *outstr)
+{
+ u8 idx = (status & JRSTA_DECOERR_INDEX_MASK) >>
+ JRSTA_DECOERR_INDEX_SHIFT;
+
+ if (status & JRSTA_DECOERR_JUMP)
+ strcat(outstr, "jump tgt desc idx ");
+ else
+ strcat(outstr, "desc idx ");
+
+ SPRINTFCAT(outstr, "%d: ", idx, sizeof("255"));
+}
+
+static void report_ccb_status(u32 status, char *outstr)
+{
+ char *cha_id_list[] = {
+ "",
+ "AES",
+ "DES, 3DES",
+ "ARC4",
+ "MD5, SHA-1, SH-224, SHA-256, SHA-384, SHA-512",
+ "RNG",
+ "SNOW f8",
+ "Kasumi f8, f9",
+ "All Public Key Algorithms",
+ "CRC",
+ "SNOW f9",
+ };
+ char *err_id_list[] = {
+ "None. No error.",
+ "Mode error.",
+ "Data size error.",
+ "Key size error.",
+ "PKHA A memory size error.",
+ "PKHA B memory size error.",
+ "Data arrived out of sequence error.",
+ "PKHA divide-by-zero error.",
+ "PKHA modulus even error.",
+ "DES key parity error.",
+ "ICV check failed.",
+ "Hardware error.",
+ "Unsupported CCM AAD size.",
+ "Class 1 CHA is not reset",
+ "Invalid CHA combination was selected",
+ "Invalid CHA selected.",
+ };
+ u8 cha_id = (status & JRSTA_CCBERR_CHAID_MASK) >>
+ JRSTA_CCBERR_CHAID_SHIFT;
+ u8 err_id = status & JRSTA_CCBERR_ERRID_MASK;
+
+ report_jump_idx(status, outstr);
+
+ if (cha_id < sizeof(cha_id_list)) {
+ SPRINTFCAT(outstr, "%s: ", cha_id_list[cha_id],
+ strlen(cha_id_list[cha_id]));
+ } else {
+ SPRINTFCAT(outstr, "unidentified cha_id value 0x%02x: ",
+ cha_id, sizeof("ff"));
+ }
+
+ if (err_id < sizeof(err_id_list)) {
+ SPRINTFCAT(outstr, "%s", err_id_list[err_id],
+ strlen(err_id_list[err_id]));
+ } else {
+ SPRINTFCAT(outstr, "unidentified err_id value 0x%02x",
+ err_id, sizeof("ff"));
+ }
+}
+
+static void report_jump_status(u32 status, char *outstr)
+{
+ SPRINTFCAT(outstr, "%s() not implemented", __func__, sizeof(__func__));
+}
+
+static void report_deco_status(u32 status, char *outstr)
+{
+ const struct {
+ u8 value;
+ char *error_text;
+ } desc_error_list[] = {
+ { 0x00, "None. No error." },
+ { 0x01, "SGT Length Error. The descriptor is trying to read "
+ "more data than is contained in the SGT table." },
+ { 0x02, "Reserved." },
+ { 0x03, "Job Ring Control Error. There is a bad value in the "
+ "Job Ring Control register." },
+ { 0x04, "Invalid Descriptor Command. The Descriptor Command "
+ "field is invalid." },
+ { 0x05, "Reserved." },
+ { 0x06, "Invalid KEY Command" },
+ { 0x07, "Invalid LOAD Command" },
+ { 0x08, "Invalid STORE Command" },
+ { 0x09, "Invalid OPERATION Command" },
+ { 0x0A, "Invalid FIFO LOAD Command" },
+ { 0x0B, "Invalid FIFO STORE Command" },
+ { 0x0C, "Invalid MOVE Command" },
+ { 0x0D, "Invalid JUMP Command. A nonlocal JUMP Command is "
+ "invalid because the target is not a Job Header "
+ "Command, or the jump is from a Trusted Descriptor to "
+ "a Job Descriptor, or because the target Descriptor "
+ "contains a Shared Descriptor." },
+ { 0x0E, "Invalid MATH Command" },
+ { 0x0F, "Invalid SIGNATURE Command" },
+ { 0x10, "Invalid Sequence Command. A SEQ IN PTR OR SEQ OUT PTR "
+ "Command is invalid or a SEQ KEY, SEQ LOAD, SEQ FIFO "
+ "LOAD, or SEQ FIFO STORE decremented the input or "
+ "output sequence length below 0. This error may result "
+ "if a built-in PROTOCOL Command has encountered a "
+ "malformed PDU." },
+ { 0x11, "Skip data type invalid. The type must be 0xE or 0xF."},
+ { 0x12, "Shared Descriptor Header Error" },
+ { 0x13, "Header Error. Invalid length or parity, or certain "
+ "other problems." },
+ { 0x14, "Burster Error. Burster has gotten to an illegal "
+ "state" },
+ { 0x15, "Context Register Length Error. The descriptor is "
+ "trying to read or write past the end of the Context "
+ "Register. A SEQ LOAD or SEQ STORE with the VLF bit "
+ "set was executed with too large a length in the "
+ "variable length register (VSOL for SEQ STORE or VSIL "
+ "for SEQ LOAD)." },
+ { 0x16, "DMA Error" },
+ { 0x17, "Reserved." },
+ { 0x1A, "Job failed due to JR reset" },
+ { 0x1B, "Job failed due to Fail Mode" },
+ { 0x1C, "DECO Watchdog timer timeout error" },
+ { 0x1D, "DECO tried to copy a key from another DECO but the "
+ "other DECO's Key Registers were locked" },
+ { 0x1E, "DECO attempted to copy data from a DECO that had an "
+ "unmasked Descriptor error" },
+ { 0x1F, "LIODN error. DECO was trying to share from itself or "
+ "from another DECO but the two Non-SEQ LIODN values "
+ "didn't match or the 'shared from' DECO's Descriptor "
+ "required that the SEQ LIODNs be the same and they "
+ "aren't." },
+ { 0x20, "DECO has completed a reset initiated via the DRR "
+ "register" },
+ { 0x21, "Nonce error. When using EKT (CCM) key encryption "
+ "option in the FIFO STORE Command, the Nonce counter "
+ "reached its maximum value and this encryption mode "
+ "can no longer be used." },
+ { 0x22, "Meta data is too large (> 511 bytes) for TLS decap "
+ "(input frame; block ciphers) and IPsec decap (output "
+ "frame, when doing the next header byte update) and "
+ "DCRC (output frame)." },
+ { 0x80, "DNR (do not run) error" },
+ { 0x81, "undefined protocol command" },
+ { 0x82, "invalid setting in PDB" },
+ { 0x83, "Anti-replay LATE error" },
+ { 0x84, "Anti-replay REPLAY error" },
+ { 0x85, "Sequence number overflow" },
+ { 0x86, "Sigver invalid signature" },
+ { 0x87, "DSA Sign Illegal test descriptor" },
+ { 0x88, "Protocol Format Error - A protocol has seen an error "
+ "in the format of data received. When running RSA, "
+ "this means that formatting with random padding was "
+ "used, and did not follow the form: 0x00, 0x02, 8-to-N "
+ "bytes of non-zero pad, 0x00, F data." },
+ { 0x89, "Protocol Size Error - A protocol has seen an error in "
+ "size. When running RSA, pdb size N < (size of F) when "
+ "no formatting is used; or pdb size N < (F + 11) when "
+ "formatting is used." },
+ { 0xC1, "Blob Command error: Undefined mode" },
+ { 0xC2, "Blob Command error: Secure Memory Blob mode error" },
+ { 0xC4, "Blob Command error: Black Blob key or input size "
+ "error" },
+ { 0xC5, "Blob Command error: Invalid key destination" },
+ { 0xC8, "Blob Command error: Trusted/Secure mode error" },
+ { 0xF0, "IPsec TTL or hop limit field either came in as 0, "
+ "or was decremented to 0" },
+ { 0xF1, "3GPP HFN matches or exceeds the Threshold" },
+ };
+ u8 desc_error = status & JRSTA_DECOERR_ERROR_MASK;
+ int i;
+
+ report_jump_idx(status, outstr);
+
+ for (i = 0; i < sizeof(desc_error_list); i++)
+ if (desc_error_list[i].value == desc_error)
+ break;
+
+ if (i != sizeof(desc_error_list) && desc_error_list[i].error_text) {
+ SPRINTFCAT(outstr, "%s", desc_error_list[i].error_text,
+ strlen(desc_error_list[i].error_text));
+ } else {
+ SPRINTFCAT(outstr, "unidentified error value 0x%02x",
+ desc_error, sizeof("ff"));
+ }
+}
+
+static void report_jr_status(u32 status, char *outstr)
+{
+ SPRINTFCAT(outstr, "%s() not implemented", __func__, sizeof(__func__));
+}
+
+static void report_cond_code_status(u32 status, char *outstr)
+{
+ SPRINTFCAT(outstr, "%s() not implemented", __func__, sizeof(__func__));
+}
+
+char *caam_jr_strstatus(char *outstr, u32 status)
+{
+ struct stat_src {
+ void (*report_ssed)(u32 status, char *outstr);
+ char *error;
+ } status_src[] = {
+ { NULL, "No error" },
+ { NULL, NULL },
+ { report_ccb_status, "CCB" },
+ { report_jump_status, "Jump" },
+ { report_deco_status, "DECO" },
+ { NULL, NULL },
+ { report_jr_status, "Job Ring" },
+ { report_cond_code_status, "Condition Code" },
+ };
+ u32 ssrc = status >> JRSTA_SSRC_SHIFT;
+
+ sprintf(outstr, "%s: ", status_src[ssrc].error);
+
+ if (status_src[ssrc].report_ssed)
+ status_src[ssrc].report_ssed(status, outstr);
+
+ return outstr;
+}
+EXPORT_SYMBOL(caam_jr_strstatus);