au1100fb: move au1100fb_fb_blank() beforce au1100fb_setmode()
au1100fb_fb_blank() should come before au1100fb_setmode().
drivers/video/au1100fb.c: In function 'au1100fb_setmode':
drivers/video/au1100fb.c:211: error: implicit declaration of function 'au1100fb_fb_blank'
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index 80a81ec..832e461 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -115,6 +115,52 @@
module_param(nocursor, int, 0644);
MODULE_PARM_DESC(nocursor, "cursor enable/disable");
+/* fb_blank
+ * Blank the screen. Depending on the mode, the screen will be
+ * activated with the backlight color, or desactivated
+ */
+static int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
+{
+ struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+
+ print_dbg("fb_blank %d %p", blank_mode, fbi);
+
+ switch (blank_mode) {
+
+ case VESA_NO_BLANKING:
+ /* Turn on panel */
+ fbdev->regs->lcd_control |= LCD_CONTROL_GO;
+#ifdef CONFIG_MIPS_PB1100
+ if (drv_info.panel_idx == 1) {
+ au_writew(au_readw(PB1100_G_CONTROL)
+ | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
+ PB1100_G_CONTROL);
+ }
+#endif
+ au_sync();
+ break;
+
+ case VESA_VSYNC_SUSPEND:
+ case VESA_HSYNC_SUSPEND:
+ case VESA_POWERDOWN:
+ /* Turn off panel */
+ fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
+#ifdef CONFIG_MIPS_PB1100
+ if (drv_info.panel_idx == 1) {
+ au_writew(au_readw(PB1100_G_CONTROL)
+ & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
+ PB1100_G_CONTROL);
+ }
+#endif
+ au_sync();
+ break;
+ default:
+ break;
+
+ }
+ return 0;
+}
+
/*
* Set hardware with var settings. This will enable the controller with a specific
* mode, normally validated with the fb_check_var method
@@ -272,52 +318,6 @@
return 0;
}
-/* fb_blank
- * Blank the screen. Depending on the mode, the screen will be
- * activated with the backlight color, or desactivated
- */
-int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
-{
- struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
-
- print_dbg("fb_blank %d %p", blank_mode, fbi);
-
- switch (blank_mode) {
-
- case VESA_NO_BLANKING:
- /* Turn on panel */
- fbdev->regs->lcd_control |= LCD_CONTROL_GO;
-#ifdef CONFIG_MIPS_PB1100
- if (drv_info.panel_idx == 1) {
- au_writew(au_readw(PB1100_G_CONTROL)
- | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
- PB1100_G_CONTROL);
- }
-#endif
- au_sync();
- break;
-
- case VESA_VSYNC_SUSPEND:
- case VESA_HSYNC_SUSPEND:
- case VESA_POWERDOWN:
- /* Turn off panel */
- fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
-#ifdef CONFIG_MIPS_PB1100
- if (drv_info.panel_idx == 1) {
- au_writew(au_readw(PB1100_G_CONTROL)
- & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
- PB1100_G_CONTROL);
- }
-#endif
- au_sync();
- break;
- default:
- break;
-
- }
- return 0;
-}
-
/* fb_pan_display
* Pan display in x and/or y as specified
*/