ARM: S5PV210: Add frame buffer display support for SMDKV210
Enable frame buffer display support for SMDKV210 board.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Reviewed-by: Jonghun Han <jonghun.han@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 862f239..53aabef 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -118,6 +118,7 @@
config MACH_SMDKV210
bool "SMDKV210"
select CPU_S5PV210
+ select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
@@ -130,6 +131,7 @@
select SAMSUNG_DEV_IDE
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_TS
+ select S5PV210_SETUP_FB_24BPP
select S5PV210_SETUP_I2C1
select S5PV210_SETUP_I2C2
select S5PV210_SETUP_IDE
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 1fbc45b..2196c23 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -14,14 +14,20 @@
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/sysdev.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
+#include <video/platform_lcd.h>
+
#include <mach/map.h>
#include <mach/regs-clock.h>
+#include <mach/regs-fb.h>
#include <plat/regs-serial.h>
#include <plat/s5pv210.h>
@@ -33,6 +39,7 @@
#include <plat/iic.h>
#include <plat/keypad.h>
#include <plat/pm.h>
+#include <plat/fb.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -102,12 +109,76 @@
.cols = 8,
};
+static void smdkv210_lte480wv_set_power(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ if (power) {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+ gpio_request(S5PV210_GPD0(3), "GPD0");
+ gpio_direction_output(S5PV210_GPD0(3), 1);
+ gpio_free(S5PV210_GPD0(3));
+#endif
+
+ /* fire nRESET on power up */
+ gpio_request(S5PV210_GPH0(6), "GPH0");
+
+ gpio_direction_output(S5PV210_GPH0(6), 1);
+
+ gpio_set_value(S5PV210_GPH0(6), 0);
+ mdelay(10);
+
+ gpio_set_value(S5PV210_GPH0(6), 1);
+ mdelay(10);
+
+ gpio_free(S5PV210_GPH0(6));
+ } else {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+ gpio_request(S5PV210_GPD0(3), "GPD0");
+ gpio_direction_output(S5PV210_GPD0(3), 0);
+ gpio_free(S5PV210_GPD0(3));
+#endif
+ }
+}
+
+static struct plat_lcd_data smdkv210_lcd_lte480wv_data = {
+ .set_power = smdkv210_lte480wv_set_power,
+};
+
+static struct platform_device smdkv210_lcd_lte480wv = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &smdkv210_lcd_lte480wv_data,
+};
+
+static struct s3c_fb_pd_win smdkv210_fb_win0 = {
+ .win_mode = {
+ .left_margin = 13,
+ .right_margin = 8,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 24,
+};
+
+static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = {
+ .win[0] = &smdkv210_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = s5pv210_fb_gpio_setup_24bpp,
+};
+
static struct platform_device *smdkv210_devices[] __initdata = {
&s5pv210_device_iis0,
&s5pv210_device_ac97,
&s5pv210_device_spdif,
&s3c_device_adc,
&s3c_device_cfcon,
+ &s3c_device_fb,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
@@ -119,6 +190,7 @@
&s3c_device_rtc,
&s3c_device_ts,
&s3c_device_wdt,
+ &smdkv210_lcd_lte480wv,
};
static struct i2c_board_info smdkv210_i2c_devs0[] __initdata = {
@@ -165,6 +237,8 @@
s3c_ide_set_platdata(&smdkv210_ide_pdata);
+ s3c_fb_set_platdata(&smdkv210_lcd0_pdata);
+
platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
}