Merge 3.5-rc4 into usb-linus
This is needed to sync up with the previous USB changes that were merged in
Linus's branch.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 6f0a4c6..6f72b80 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1899,6 +1899,8 @@
{
if (sdp->host->max_cmd_len < 16)
return 0;
+ if (sdp->try_rc_10_first)
+ return 0;
if (sdp->scsi_level > SCSI_SPC_2)
return 1;
if (scsi_device_protection(sdp))
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 3df1a19..ec70df7 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1091,7 +1091,7 @@
if (r == req) {
/* wait until it is processed */
dwc3_stop_active_transfer(dwc, dep->number);
- goto out0;
+ goto out1;
}
dev_err(dwc->dev, "request %p was not queued to %s\n",
request, ep->name);
@@ -1099,6 +1099,7 @@
goto out0;
}
+out1:
/* giveback the request */
dwc3_gadget_giveback(dep, req, -ECONNRESET);
diff --git a/drivers/usb/gadget/fsl_qe_udc.h b/drivers/usb/gadget/fsl_qe_udc.h
index 4c07ca9..7026919 100644
--- a/drivers/usb/gadget/fsl_qe_udc.h
+++ b/drivers/usb/gadget/fsl_qe_udc.h
@@ -153,10 +153,10 @@
#define USB_BUSMODE_DTB 0x02
/* Endpoint basic handle */
-#define ep_index(EP) ((EP)->desc->bEndpointAddress & 0xF)
+#define ep_index(EP) ((EP)->ep.desc->bEndpointAddress & 0xF)
#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
#define ep_is_in(EP) ((ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
- USB_DIR_IN) : ((EP)->desc->bEndpointAddress \
+ USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \
& USB_DIR_IN) == USB_DIR_IN)
/* ep0 transfer state */
diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c
index 262acfd..2ab0388 100644
--- a/drivers/usb/gadget/lpc32xx_udc.c
+++ b/drivers/usb/gadget/lpc32xx_udc.c
@@ -61,6 +61,7 @@
#include <mach/irqs.h>
#include <mach/board.h>
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+#include <linux/debugfs.h>
#include <linux/seq_file.h>
#endif
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index ef8d744..e090c79 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -375,11 +375,21 @@
*/
if (list_empty(&qh->hep->urb_list)) {
struct list_head *head;
+ struct dma_controller *dma = musb->dma_controller;
- if (is_in)
+ if (is_in) {
ep->rx_reinit = 1;
- else
+ if (ep->rx_channel) {
+ dma->channel_release(ep->rx_channel);
+ ep->rx_channel = NULL;
+ }
+ } else {
ep->tx_reinit = 1;
+ if (ep->tx_channel) {
+ dma->channel_release(ep->tx_channel);
+ ep->tx_channel = NULL;
+ }
+ }
/* Clobber old pointers to this qh */
musb_ep_set_qh(ep, is_in, NULL);
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
index d2a9a8e..0eabb04 100644
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -305,9 +305,8 @@
regulator_enable(twl->usb3v3);
twl->asleep = 1;
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1);
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
- 0x10);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
status = USB_EVENT_ID;
otg->default_a = true;
twl->phy.state = OTG_STATE_A_IDLE;
@@ -316,12 +315,10 @@
atomic_notifier_call_chain(&twl->phy.notifier, status,
otg->gadget);
} else {
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR,
- 0x10);
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
- 0x1);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
}
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status);
+ twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR);
return IRQ_HANDLED;
}
@@ -343,7 +340,7 @@
{
struct twl6030_usb *twl = phy_to_twl(x);
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x1);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e668a24..396d968 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -497,6 +497,10 @@
/* MediaTek products */
#define MEDIATEK_VENDOR_ID 0x0e8d
+/* Cellient products */
+#define CELLIENT_VENDOR_ID 0x2692
+#define CELLIENT_PRODUCT_MEN200 0x9005
+
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
OPTION_BLACKLIST_NONE = 0,
@@ -1233,6 +1237,7 @@
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) }, /* MediaTek MT6276M modem & app port */
+ { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index a324a5d..11418da 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -202,6 +202,12 @@
if (us->fflags & US_FL_NO_READ_CAPACITY_16)
sdev->no_read_capacity_16 = 1;
+ /*
+ * Many devices do not respond properly to READ_CAPACITY_16.
+ * Tell the SCSI layer to try READ_CAPACITY_10 first.
+ */
+ sdev->try_rc_10_first = 1;
+
/* assume SPC3 or latter devices support sense size > 18 */
if (sdev->scsi_level > SCSI_SPC_2)
us->fflags |= US_FL_SANE_SENSE;
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index caf22bf..1719886 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1107,13 +1107,6 @@
USB_SC_RBC, USB_PR_BULK, NULL,
0 ),
-/* Feiya QDI U2 DISK, reported by Hans de Goede <hdegoede@redhat.com> */
-UNUSUAL_DEV( 0x090c, 0x1000, 0x0000, 0xffff,
- "Feiya",
- "QDI U2 DISK",
- USB_SC_DEVICE, USB_PR_DEVICE, NULL,
- US_FL_NO_READ_CAPACITY_16 ),
-
/* aeb */
UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
"Feiya",
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 6efb2e1..ba96988 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -151,6 +151,7 @@
SD_LAST_BUGGY_SECTORS */
unsigned no_read_disc_info:1; /* Avoid READ_DISC_INFO cmds */
unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
+ unsigned try_rc_10_first:1; /* Try READ_CAPACACITY_10 first */
unsigned is_visible:1; /* is the device visible in sysfs */
DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */