[ACPI] fix resume issues on Asus L5D
http://bugzilla.kernel.org/show_bug.cgi?id=4416
Signed-off-by: Rafael J. Wysocki <rjwysocki@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
index 05b827f..7bfaef9 100644
--- a/drivers/net/sk98lin/skge.c
+++ b/drivers/net/sk98lin/skge.c
@@ -5134,6 +5134,67 @@
kfree(pAC);
}
+#ifdef CONFIG_PM
+static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ DEV_NET *pNet = netdev_priv(dev);
+ SK_AC *pAC = pNet->pAC;
+ struct net_device *otherdev = pAC->dev[1];
+
+ if (pNet->Up) {
+ pAC->WasIfUp[0] = SK_TRUE;
+ DoPrintInterfaceChange = SK_FALSE;
+ SkDrvDeInitAdapter(pAC, 0); /* performs SkGeClose */
+ }
+ if (otherdev != dev) {
+ pNet = netdev_priv(otherdev);
+ if (pNet->Up) {
+ pAC->WasIfUp[1] = SK_TRUE;
+ DoPrintInterfaceChange = SK_FALSE;
+ SkDrvDeInitAdapter(pAC, 1); /* performs SkGeClose */
+ }
+ }
+
+ pci_save_state(pdev);
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
+ if (pAC->AllocFlag & SK_ALLOC_IRQ) {
+ free_irq(dev->irq, dev);
+ }
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ return 0;
+}
+
+static int skge_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ DEV_NET *pNet = netdev_priv(dev);
+ SK_AC *pAC = pNet->pAC;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_enable_device(pdev);
+ pci_set_master(pdev);
+ if (pAC->GIni.GIMacsFound == 2)
+ request_irq(dev->irq, SkGeIsr, SA_SHIRQ, pAC->Name, dev);
+ else
+ request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ, pAC->Name, dev);
+
+ if (pAC->WasIfUp[0] == SK_TRUE) {
+ DoPrintInterfaceChange = SK_FALSE;
+ SkDrvInitAdapter(pAC, 0); /* first device */
+ }
+ if (pAC->dev[1] != dev && pAC->WasIfUp[1] == SK_TRUE) {
+ DoPrintInterfaceChange = SK_FALSE;
+ SkDrvInitAdapter(pAC, 1); /* first device */
+ }
+
+ return 0;
+}
+#endif
+
static struct pci_device_id skge_pci_tbl[] = {
{ PCI_VENDOR_ID_3COM, 0x1700, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ PCI_VENDOR_ID_3COM, 0x80eb, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
@@ -5159,6 +5220,8 @@
.id_table = skge_pci_tbl,
.probe = skge_probe_one,
.remove = __devexit_p(skge_remove_one),
+ .suspend = skge_suspend,
+ .resume = skge_resume,
};
static int __init skge_init(void)
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index caf7159..a8a9d95 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -1034,6 +1034,8 @@
pci_read_config_dword(dev, 17*4, &socket->saved_state[1]);
pci_disable_device(dev);
+ free_irq(dev->irq, socket);
+
/*
* Some laptops (IBM T22) do not like us putting the Cardbus
* bridge into D3. At a guess, some other laptop will
@@ -1059,6 +1061,13 @@
pci_enable_device(dev);
pci_set_master(dev);
+ if (socket->cb_irq)
+ if (request_irq(socket->cb_irq, yenta_interrupt,
+ SA_SHIRQ, "yenta", socket)) {
+ printk(KERN_WARNING "Yenta: request_irq() failed on resume!\n");
+ socket->cb_irq = 0;
+ }
+
if (socket->type && socket->type->restore_state)
socket->type->restore_state(socket);
}
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 8b33b12..2a7e63b 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -2367,6 +2367,8 @@
for (i = 0; i < 3; i++)
if (chip->ac97[i])
snd_ac97_suspend(chip->ac97[i]);
+ if (chip->irq >= 0)
+ free_irq(chip->irq, (void *)chip);
pci_disable_device(chip->pci);
return 0;
}
@@ -2378,7 +2380,9 @@
pci_enable_device(chip->pci);
pci_set_master(chip->pci);
- snd_intel8x0_chip_init(chip, 0);
+ request_irq(chip->irq, snd_intel8x0_interrupt, SA_INTERRUPT|SA_SHIRQ, card->shortname, (void *)chip);
+ synchronize_irq(chip->irq);
+ snd_intel8x0_chip_init(chip, 1);
/* refill nocache */
if (chip->fix_nocache)