diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index bd709e5..564fab4 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -189,6 +189,16 @@
 static void e1000_netpoll (struct net_device *netdev);
 #endif
 
+static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
+                     pci_channel_state_t state);
+static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev);
+static void e1000_io_resume(struct pci_dev *pdev);
+
+static struct pci_error_handlers e1000_err_handler = {
+	.error_detected = e1000_io_error_detected,
+	.slot_reset = e1000_io_slot_reset,
+	.resume = e1000_io_resume,
+};
 
 static struct pci_driver e1000_driver = {
 	.name     = e1000_driver_name,
@@ -200,7 +210,8 @@
 	.suspend  = e1000_suspend,
 	.resume   = e1000_resume,
 #endif
-	.shutdown = e1000_shutdown
+	.shutdown = e1000_shutdown,
+	.err_handler = &e1000_err_handler
 };
 
 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
@@ -3039,6 +3050,10 @@
 
 #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
 
+	/* Prevent stats update while adapter is being reset */
+	if (adapter->link_speed == 0)
+		return;
+
 	spin_lock_irqsave(&adapter->stats_lock, flags);
 
 	/* these counters are modified from e1000_adjust_tbi_stats,
@@ -4594,4 +4609,101 @@
 }
 #endif
 
+/**
+ * e1000_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci conneection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct e1000_adapter *adapter = netdev->priv;
+
+	netif_device_detach(netdev);
+
+	if (netif_running(netdev))
+		e1000_down(adapter);
+
+	/* Request a slot slot reset. */
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * e1000_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the e1000_resume routine.
+ */
+static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct e1000_adapter *adapter = netdev->priv;
+
+	if (pci_enable_device(pdev)) {
+		printk(KERN_ERR "e1000: Cannot re-enable PCI device after reset.\n");
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+	pci_set_master(pdev);
+
+	pci_enable_wake(pdev, 3, 0);
+	pci_enable_wake(pdev, 4, 0); /* 4 == D3 cold */
+
+	/* Perform card reset only on one instance of the card */
+	if (PCI_FUNC (pdev->devfn) != 0)
+		return PCI_ERS_RESULT_RECOVERED;
+
+	e1000_reset(adapter);
+	E1000_WRITE_REG(&adapter->hw, WUS, ~0);
+
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * e1000_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the e1000_resume routine.
+ */
+static void e1000_io_resume(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct e1000_adapter *adapter = netdev->priv;
+	uint32_t manc, swsm;
+
+	if (netif_running(netdev)) {
+		if (e1000_up(adapter)) {
+			printk("e1000: can't bring device back up after reset\n");
+			return;
+		}
+	}
+
+	netif_device_attach(netdev);
+
+	if (adapter->hw.mac_type >= e1000_82540 &&
+	    adapter->hw.media_type == e1000_media_type_copper) {
+		manc = E1000_READ_REG(&adapter->hw, MANC);
+		manc &= ~(E1000_MANC_ARP_EN);
+		E1000_WRITE_REG(&adapter->hw, MANC, manc);
+	}
+
+	switch (adapter->hw.mac_type) {
+	case e1000_82573:
+		swsm = E1000_READ_REG(&adapter->hw, SWSM);
+		E1000_WRITE_REG(&adapter->hw, SWSM,
+				swsm | E1000_SWSM_DRV_LOAD);
+		break;
+	default:
+		break;
+	}
+
+	if (netif_running(netdev))
+		mod_timer(&adapter->watchdog_timer, jiffies);
+}
+
 /* e1000_main.c */