sata_sil24: don't use NCQ if marvell 4140 PMP is attached
When 4140 PMP is attached to sil24, NCQ commands to fan out port 1 and
2 (0 based) often stall if commands are in progress to other ports.
I've tried a number of things but can't tell what's going on. It
never happens w/ ahci and reportedly sata_mv which can issue NCQ
commands to multiple devices simultaneously like sil24 does.
Disable NCQ for devices behind 4140 PMP for the time being.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Mark Lord <liml@rtr.ca>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 27a1101..8ee6b5b4 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -899,14 +899,25 @@
static void sil24_pmp_attach(struct ata_port *ap)
{
+ u32 *gscr = ap->link.device->gscr;
+
sil24_config_pmp(ap, 1);
sil24_init_port(ap);
+
+ if (sata_pmp_gscr_vendor(gscr) == 0x11ab &&
+ sata_pmp_gscr_devid(gscr) == 0x4140) {
+ ata_port_printk(ap, KERN_INFO,
+ "disabling NCQ support due to sil24-mv4140 quirk\n");
+ ap->flags &= ~ATA_FLAG_NCQ;
+ }
}
static void sil24_pmp_detach(struct ata_port *ap)
{
sil24_init_port(ap);
sil24_config_pmp(ap, 0);
+
+ ap->flags |= ATA_FLAG_NCQ;
}
static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,