pcmcia: replace kio_addr_t with unsigned int everywhere
Remove kio_addr_t, and replace it with unsigned int. No known architecture
needs more than 32 bits for IO addresses and ports and having a separate type
for it is just messy.
Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 9ba56aa..6bc48a0 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -349,7 +349,7 @@
static hw_info_t *get_prom(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- kio_addr_t ioaddr = dev->base_addr;
+ unsigned int ioaddr = dev->base_addr;
u_char prom[32];
int i, j;
@@ -425,7 +425,7 @@
static hw_info_t *get_ax88190(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- kio_addr_t ioaddr = dev->base_addr;
+ unsigned int ioaddr = dev->base_addr;
int i, j;
/* Not much of a test, but the alternatives are messy */
@@ -756,7 +756,7 @@
#define MDIO_DATA_READ 0x10
#define MDIO_MASK 0x0f
-static void mdio_sync(kio_addr_t addr)
+static void mdio_sync(unsigned int addr)
{
int bits, mask = inb(addr) & MDIO_MASK;
for (bits = 0; bits < 32; bits++) {
@@ -765,7 +765,7 @@
}
}
-static int mdio_read(kio_addr_t addr, int phy_id, int loc)
+static int mdio_read(unsigned int addr, int phy_id, int loc)
{
u_int cmd = (0x06<<10)|(phy_id<<5)|loc;
int i, retval = 0, mask = inb(addr) & MDIO_MASK;
@@ -784,7 +784,7 @@
return (retval>>1) & 0xffff;
}
-static void mdio_write(kio_addr_t addr, int phy_id, int loc, int value)
+static void mdio_write(unsigned int addr, int phy_id, int loc, int value)
{
u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value;
int i, mask = inb(addr) & MDIO_MASK;
@@ -818,10 +818,10 @@
#define DL19FDUPLX 0x0400 /* DL10019 Full duplex mode */
-static int read_eeprom(kio_addr_t ioaddr, int location)
+static int read_eeprom(unsigned int ioaddr, int location)
{
int i, retval = 0;
- kio_addr_t ee_addr = ioaddr + DLINK_EEPROM;
+ unsigned int ee_addr = ioaddr + DLINK_EEPROM;
int read_cmd = location | (EE_READ_CMD << 8);
outb(0, ee_addr);
@@ -852,10 +852,10 @@
In ASIC mode, EE_ADOT is used to output the data to the ASIC.
*/
-static void write_asic(kio_addr_t ioaddr, int location, short asic_data)
+static void write_asic(unsigned int ioaddr, int location, short asic_data)
{
int i;
- kio_addr_t ee_addr = ioaddr + DLINK_EEPROM;
+ unsigned int ee_addr = ioaddr + DLINK_EEPROM;
short dataval;
int read_cmd = location | (EE_READ_CMD << 8);
@@ -897,7 +897,7 @@
static void set_misc_reg(struct net_device *dev)
{
- kio_addr_t nic_base = dev->base_addr;
+ unsigned int nic_base = dev->base_addr;
pcnet_dev_t *info = PRIV(dev);
u_char tmp;
@@ -936,7 +936,7 @@
static void mii_phy_probe(struct net_device *dev)
{
pcnet_dev_t *info = PRIV(dev);
- kio_addr_t mii_addr = dev->base_addr + DLINK_GPIO;
+ unsigned int mii_addr = dev->base_addr + DLINK_GPIO;
int i;
u_int tmp, phyid;
@@ -1014,7 +1014,7 @@
static void pcnet_reset_8390(struct net_device *dev)
{
- kio_addr_t nic_base = dev->base_addr;
+ unsigned int nic_base = dev->base_addr;
int i;
ei_status.txing = ei_status.dmaing = 0;
@@ -1074,8 +1074,8 @@
{
struct net_device *dev = (struct net_device *)arg;
pcnet_dev_t *info = PRIV(dev);
- kio_addr_t nic_base = dev->base_addr;
- kio_addr_t mii_addr = nic_base + DLINK_GPIO;
+ unsigned int nic_base = dev->base_addr;
+ unsigned int mii_addr = nic_base + DLINK_GPIO;
u_short link;
if (!netif_device_present(dev)) goto reschedule;
@@ -1177,7 +1177,7 @@
{
pcnet_dev_t *info = PRIV(dev);
u16 *data = (u16 *)&rq->ifr_ifru;
- kio_addr_t mii_addr = dev->base_addr + DLINK_GPIO;
+ unsigned int mii_addr = dev->base_addr + DLINK_GPIO;
switch (cmd) {
case SIOCGMIIPHY:
data[0] = info->phy_id;
@@ -1199,7 +1199,7 @@
struct e8390_pkt_hdr *hdr,
int ring_page)
{
- kio_addr_t nic_base = dev->base_addr;
+ unsigned int nic_base = dev->base_addr;
if (ei_status.dmaing) {
printk(KERN_NOTICE "%s: DMAing conflict in dma_block_input."
@@ -1230,7 +1230,7 @@
static void dma_block_input(struct net_device *dev, int count,
struct sk_buff *skb, int ring_offset)
{
- kio_addr_t nic_base = dev->base_addr;
+ unsigned int nic_base = dev->base_addr;
int xfer_count = count;
char *buf = skb->data;
@@ -1285,7 +1285,7 @@
static void dma_block_output(struct net_device *dev, int count,
const u_char *buf, const int start_page)
{
- kio_addr_t nic_base = dev->base_addr;
+ unsigned int nic_base = dev->base_addr;
pcnet_dev_t *info = PRIV(dev);
#ifdef PCMCIA_DEBUG
int retries = 0;