drm: rcar-du: Implement support for interlaced modes
Accept interlaced modes on the VGA and HDMI connectors and configure the
hardware accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
index 86766cc..25c7a99 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
@@ -155,12 +155,15 @@
mode->hsync_start - 1);
rcar_du_crtc_write(rcrtc, HCR, mode->htotal - 1);
- rcar_du_crtc_write(rcrtc, VDSR, mode->vtotal - mode->vsync_end - 2);
- rcar_du_crtc_write(rcrtc, VDER, mode->vtotal - mode->vsync_end +
- mode->vdisplay - 2);
- rcar_du_crtc_write(rcrtc, VSPR, mode->vtotal - mode->vsync_end +
- mode->vsync_start - 1);
- rcar_du_crtc_write(rcrtc, VCR, mode->vtotal - 1);
+ rcar_du_crtc_write(rcrtc, VDSR, mode->crtc_vtotal -
+ mode->crtc_vsync_end - 2);
+ rcar_du_crtc_write(rcrtc, VDER, mode->crtc_vtotal -
+ mode->crtc_vsync_end +
+ mode->crtc_vdisplay - 2);
+ rcar_du_crtc_write(rcrtc, VSPR, mode->crtc_vtotal -
+ mode->crtc_vsync_end +
+ mode->crtc_vsync_start - 1);
+ rcar_du_crtc_write(rcrtc, VCR, mode->crtc_vtotal - 1);
rcar_du_crtc_write(rcrtc, DESR, mode->htotal - mode->hsync_start);
rcar_du_crtc_write(rcrtc, DEWR, mode->hdisplay);
@@ -256,6 +259,7 @@
static void rcar_du_crtc_start(struct rcar_du_crtc *rcrtc)
{
struct drm_crtc *crtc = &rcrtc->crtc;
+ bool interlaced;
unsigned int i;
if (rcrtc->started)
@@ -291,7 +295,10 @@
* sync mode (with the HSYNC and VSYNC signals configured as outputs and
* actively driven).
*/
- rcar_du_crtc_clr_set(rcrtc, DSYSR, DSYSR_TVM_MASK, DSYSR_TVM_MASTER);
+ interlaced = rcrtc->crtc.mode.flags & DRM_MODE_FLAG_INTERLACE;
+ rcar_du_crtc_clr_set(rcrtc, DSYSR, DSYSR_TVM_MASK | DSYSR_SCM_MASK,
+ (interlaced ? DSYSR_SCM_INT_VIDEO : 0) |
+ DSYSR_TVM_MASTER);
rcar_du_group_start_stop(rcrtc->group, true);
@@ -528,7 +535,7 @@
status = rcar_du_crtc_read(rcrtc, DSSR);
rcar_du_crtc_write(rcrtc, DSRCR, status & DSRCR_MASK);
- if (status & DSSR_VBK) {
+ if (status & DSSR_FRM) {
drm_handle_vblank(rcrtc->crtc.dev, rcrtc->index);
rcar_du_crtc_finish_page_flip(rcrtc);
ret = IRQ_HANDLED;