[PATCH] V4L/DVB: (3086a) Whitespaces cleanups part 1
Clean up whitespaces at v4l/dvb files
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/media/dvb/frontends/at76c651.c b/drivers/media/dvb/frontends/at76c651.c
index 72a2b54..8e0f4b3 100644
--- a/drivers/media/dvb/frontends/at76c651.c
+++ b/drivers/media/dvb/frontends/at76c651.c
@@ -361,9 +361,9 @@
static int at76c651_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *fesettings)
{
- fesettings->min_delay_ms = 50;
- fesettings->step_size = 0;
- fesettings->max_drift = 0;
+ fesettings->min_delay_ms = 50;
+ fesettings->step_size = 0;
+ fesettings->max_drift = 0;
return 0;
}
diff --git a/drivers/media/dvb/frontends/bcm3510.c b/drivers/media/dvb/frontends/bcm3510.c
index f6d4ee7..8ceb9a3 100644
--- a/drivers/media/dvb/frontends/bcm3510.c
+++ b/drivers/media/dvb/frontends/bcm3510.c
@@ -69,7 +69,7 @@
#define dbufout(b,l,m) {\
int i; \
for (i = 0; i < l; i++) \
- m("%02x ",b[i]); \
+ m("%02x ",b[i]); \
}
#define deb_info(args...) dprintk(0x01,args)
#define deb_i2c(args...) dprintk(0x02,args)
@@ -827,7 +827,7 @@
.type = FE_ATSC,
.frequency_min = 54000000,
.frequency_max = 803000000,
- /* stepsize is just a guess */
+ /* stepsize is just a guess */
.frequency_stepsize = 0,
.caps =
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
diff --git a/drivers/media/dvb/frontends/cx22700.c b/drivers/media/dvb/frontends/cx22700.c
index 0c2ed44..755f774 100644
--- a/drivers/media/dvb/frontends/cx22700.c
+++ b/drivers/media/dvb/frontends/cx22700.c
@@ -355,10 +355,10 @@
static int cx22700_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
{
- fesettings->min_delay_ms = 150;
- fesettings->step_size = 166667;
- fesettings->max_drift = 166667*2;
- return 0;
+ fesettings->min_delay_ms = 150;
+ fesettings->step_size = 166667;
+ fesettings->max_drift = 166667*2;
+ return 0;
}
static void cx22700_release(struct dvb_frontend* fe)
@@ -407,7 +407,7 @@
.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
- FE_CAN_RECOVER
+ FE_CAN_RECOVER
},
.release = cx22700_release,
diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c
index d9a8ede..5de0e6d3 100644
--- a/drivers/media/dvb/frontends/cx22702.c
+++ b/drivers/media/dvb/frontends/cx22702.c
@@ -2,7 +2,7 @@
Conexant 22702 DVB OFDM demodulator driver
based on:
- Alps TDMB7 DVB OFDM demodulator driver
+ Alps TDMB7 DVB OFDM demodulator driver
Copyright (C) 2001-2002 Convergence Integrated Media GmbH
Holger Waechtler <holger@convergence.de>
diff --git a/drivers/media/dvb/frontends/cx22702.h b/drivers/media/dvb/frontends/cx22702.h
index 1f25088..5633976 100644
--- a/drivers/media/dvb/frontends/cx22702.h
+++ b/drivers/media/dvb/frontends/cx22702.h
@@ -2,7 +2,7 @@
Conexant 22702 DVB OFDM demodulator driver
based on:
- Alps TDMB7 DVB OFDM demodulator driver
+ Alps TDMB7 DVB OFDM demodulator driver
Copyright (C) 2001-2002 Convergence Integrated Media GmbH
Holger Waechtler <holger@convergence.de>
diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c
index 654d7dc..0c4db80 100644
--- a/drivers/media/dvb/frontends/cx24110.c
+++ b/drivers/media/dvb/frontends/cx24110.c
@@ -55,81 +55,81 @@
} while (0)
static struct {u8 reg; u8 data;} cx24110_regdata[]=
- /* Comments beginning with @ denote this value should
- be the default */
- {{0x09,0x01}, /* SoftResetAll */
- {0x09,0x00}, /* release reset */
- {0x01,0xe8}, /* MSB of code rate 27.5MS/s */
- {0x02,0x17}, /* middle byte " */
- {0x03,0x29}, /* LSB " */
- {0x05,0x03}, /* @ DVB mode, standard code rate 3/4 */
- {0x06,0xa5}, /* @ PLL 60MHz */
- {0x07,0x01}, /* @ Fclk, i.e. sampling clock, 60MHz */
- {0x0a,0x00}, /* @ partial chip disables, do not set */
- {0x0b,0x01}, /* set output clock in gapped mode, start signal low
- active for first byte */
- {0x0c,0x11}, /* no parity bytes, large hold time, serial data out */
- {0x0d,0x6f}, /* @ RS Sync/Unsync thresholds */
- {0x10,0x40}, /* chip doc is misleading here: write bit 6 as 1
- to avoid starting the BER counter. Reset the
- CRC test bit. Finite counting selected */
- {0x15,0xff}, /* @ size of the limited time window for RS BER
- estimation. It is <value>*256 RS blocks, this
- gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */
- {0x16,0x00}, /* @ enable all RS output ports */
- {0x17,0x04}, /* @ time window allowed for the RS to sync */
- {0x18,0xae}, /* @ allow all standard DVB code rates to be scanned
- for automatically */
- /* leave the current code rate and normalization
- registers as they are after reset... */
- {0x21,0x10}, /* @ during AutoAcq, search each viterbi setting
- only once */
- {0x23,0x18}, /* @ size of the limited time window for Viterbi BER
- estimation. It is <value>*65536 channel bits, i.e.
- approx. 38ms at 27.5MS/s, rate 3/4 */
- {0x24,0x24}, /* do not trigger Viterbi CRC test. Finite count window */
- /* leave front-end AGC parameters at default values */
- /* leave decimation AGC parameters at default values */
- {0x35,0x40}, /* disable all interrupts. They are not connected anyway */
- {0x36,0xff}, /* clear all interrupt pending flags */
- {0x37,0x00}, /* @ fully enable AutoAcqq state machine */
- {0x38,0x07}, /* @ enable fade recovery, but not autostart AutoAcq */
- /* leave the equalizer parameters on their default values */
- /* leave the final AGC parameters on their default values */
- {0x41,0x00}, /* @ MSB of front-end derotator frequency */
- {0x42,0x00}, /* @ middle bytes " */
- {0x43,0x00}, /* @ LSB " */
- /* leave the carrier tracking loop parameters on default */
- /* leave the bit timing loop parameters at gefault */
- {0x56,0x4d}, /* set the filtune voltage to 2.7V, as recommended by */
- /* the cx24108 data sheet for symbol rates above 15MS/s */
- {0x57,0x00}, /* @ Filter sigma delta enabled, positive */
- {0x61,0x95}, /* GPIO pins 1-4 have special function */
- {0x62,0x05}, /* GPIO pin 5 has special function, pin 6 is GPIO */
- {0x63,0x00}, /* All GPIO pins use CMOS output characteristics */
- {0x64,0x20}, /* GPIO 6 is input, all others are outputs */
- {0x6d,0x30}, /* tuner auto mode clock freq 62kHz */
- {0x70,0x15}, /* use auto mode, tuner word is 21 bits long */
- {0x73,0x00}, /* @ disable several demod bypasses */
- {0x74,0x00}, /* @ " */
- {0x75,0x00} /* @ " */
- /* the remaining registers are for SEC */
+ /* Comments beginning with @ denote this value should
+ be the default */
+ {{0x09,0x01}, /* SoftResetAll */
+ {0x09,0x00}, /* release reset */
+ {0x01,0xe8}, /* MSB of code rate 27.5MS/s */
+ {0x02,0x17}, /* middle byte " */
+ {0x03,0x29}, /* LSB " */
+ {0x05,0x03}, /* @ DVB mode, standard code rate 3/4 */
+ {0x06,0xa5}, /* @ PLL 60MHz */
+ {0x07,0x01}, /* @ Fclk, i.e. sampling clock, 60MHz */
+ {0x0a,0x00}, /* @ partial chip disables, do not set */
+ {0x0b,0x01}, /* set output clock in gapped mode, start signal low
+ active for first byte */
+ {0x0c,0x11}, /* no parity bytes, large hold time, serial data out */
+ {0x0d,0x6f}, /* @ RS Sync/Unsync thresholds */
+ {0x10,0x40}, /* chip doc is misleading here: write bit 6 as 1
+ to avoid starting the BER counter. Reset the
+ CRC test bit. Finite counting selected */
+ {0x15,0xff}, /* @ size of the limited time window for RS BER
+ estimation. It is <value>*256 RS blocks, this
+ gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */
+ {0x16,0x00}, /* @ enable all RS output ports */
+ {0x17,0x04}, /* @ time window allowed for the RS to sync */
+ {0x18,0xae}, /* @ allow all standard DVB code rates to be scanned
+ for automatically */
+ /* leave the current code rate and normalization
+ registers as they are after reset... */
+ {0x21,0x10}, /* @ during AutoAcq, search each viterbi setting
+ only once */
+ {0x23,0x18}, /* @ size of the limited time window for Viterbi BER
+ estimation. It is <value>*65536 channel bits, i.e.
+ approx. 38ms at 27.5MS/s, rate 3/4 */
+ {0x24,0x24}, /* do not trigger Viterbi CRC test. Finite count window */
+ /* leave front-end AGC parameters at default values */
+ /* leave decimation AGC parameters at default values */
+ {0x35,0x40}, /* disable all interrupts. They are not connected anyway */
+ {0x36,0xff}, /* clear all interrupt pending flags */
+ {0x37,0x00}, /* @ fully enable AutoAcqq state machine */
+ {0x38,0x07}, /* @ enable fade recovery, but not autostart AutoAcq */
+ /* leave the equalizer parameters on their default values */
+ /* leave the final AGC parameters on their default values */
+ {0x41,0x00}, /* @ MSB of front-end derotator frequency */
+ {0x42,0x00}, /* @ middle bytes " */
+ {0x43,0x00}, /* @ LSB " */
+ /* leave the carrier tracking loop parameters on default */
+ /* leave the bit timing loop parameters at gefault */
+ {0x56,0x4d}, /* set the filtune voltage to 2.7V, as recommended by */
+ /* the cx24108 data sheet for symbol rates above 15MS/s */
+ {0x57,0x00}, /* @ Filter sigma delta enabled, positive */
+ {0x61,0x95}, /* GPIO pins 1-4 have special function */
+ {0x62,0x05}, /* GPIO pin 5 has special function, pin 6 is GPIO */
+ {0x63,0x00}, /* All GPIO pins use CMOS output characteristics */
+ {0x64,0x20}, /* GPIO 6 is input, all others are outputs */
+ {0x6d,0x30}, /* tuner auto mode clock freq 62kHz */
+ {0x70,0x15}, /* use auto mode, tuner word is 21 bits long */
+ {0x73,0x00}, /* @ disable several demod bypasses */
+ {0x74,0x00}, /* @ " */
+ {0x75,0x00} /* @ " */
+ /* the remaining registers are for SEC */
};
static int cx24110_writereg (struct cx24110_state* state, int reg, int data)
{
- u8 buf [] = { reg, data };
+ u8 buf [] = { reg, data };
struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
int err;
- if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
+ if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
dprintk ("%s: writereg error (err == %i, reg == 0x%02x,"
" data == 0x%02x)\n", __FUNCTION__, err, reg, data);
return -EREMOTEIO;
}
- return 0;
+ return 0;
}
static int cx24110_readreg (struct cx24110_state* state, u8 reg)
@@ -153,27 +153,27 @@
switch (inversion) {
case INVERSION_OFF:
- cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1);
- /* AcqSpectrInvDis on. No idea why someone should want this */
- cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)&0xf7);
- /* Initial value 0 at start of acq */
- cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)&0xef);
- /* current value 0 */
- /* The cx24110 manual tells us this reg is read-only.
- But what the heck... set it ayways */
- break;
+ cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1);
+ /* AcqSpectrInvDis on. No idea why someone should want this */
+ cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)&0xf7);
+ /* Initial value 0 at start of acq */
+ cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)&0xef);
+ /* current value 0 */
+ /* The cx24110 manual tells us this reg is read-only.
+ But what the heck... set it ayways */
+ break;
case INVERSION_ON:
- cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1);
- /* AcqSpectrInvDis on. No idea why someone should want this */
- cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)|0x08);
- /* Initial value 1 at start of acq */
- cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)|0x10);
- /* current value 1 */
- break;
+ cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1);
+ /* AcqSpectrInvDis on. No idea why someone should want this */
+ cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)|0x08);
+ /* Initial value 1 at start of acq */
+ cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)|0x10);
+ /* current value 1 */
+ break;
case INVERSION_AUTO:
- cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xfe);
- /* AcqSpectrInvDis off. Leave initial & current states as is */
- break;
+ cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xfe);
+ /* AcqSpectrInvDis off. Leave initial & current states as is */
+ break;
default:
return -EINVAL;
}
@@ -185,18 +185,18 @@
{
/* fixme (low): error handling */
- static const int rate[]={-1,1,2,3,5,7,-1};
- static const int g1[]={-1,0x01,0x02,0x05,0x15,0x45,-1};
- static const int g2[]={-1,0x01,0x03,0x06,0x1a,0x7a,-1};
+ static const int rate[]={-1,1,2,3,5,7,-1};
+ static const int g1[]={-1,0x01,0x02,0x05,0x15,0x45,-1};
+ static const int g2[]={-1,0x01,0x03,0x06,0x1a,0x7a,-1};
- /* Well, the AutoAcq engine of the cx24106 and 24110 automatically
- searches all enabled viterbi rates, and can handle non-standard
- rates as well. */
+ /* Well, the AutoAcq engine of the cx24106 and 24110 automatically
+ searches all enabled viterbi rates, and can handle non-standard
+ rates as well. */
- if (fec>FEC_AUTO)
- fec=FEC_AUTO;
+ if (fec>FEC_AUTO)
+ fec=FEC_AUTO;
- if (fec==FEC_AUTO) { /* (re-)establish AutoAcq behaviour */
+ if (fec==FEC_AUTO) { /* (re-)establish AutoAcq behaviour */
cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xdf);
/* clear AcqVitDis bit */
cx24110_writereg(state,0x18,0xae);
@@ -208,7 +208,7 @@
cx24110_writereg(state,0x1a,0x05); cx24110_writereg(state,0x1b,0x06);
/* set the puncture registers for code rate 3/4 */
return 0;
- } else {
+ } else {
cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x20);
/* set AcqVitDis bit */
if(rate[fec]>0) {
@@ -219,10 +219,10 @@
cx24110_writereg(state,0x1a,g1[fec]);
cx24110_writereg(state,0x1b,g2[fec]);
/* not sure if this is the right way: I always used AutoAcq mode */
- } else
+ } else
return -EOPNOTSUPP;
/* fixme (low): which is the correct return code? */
- };
+ };
return 0;
}
@@ -245,72 +245,72 @@
static int cx24110_set_symbolrate (struct cx24110_state* state, u32 srate)
{
/* fixme (low): add error handling */
- u32 ratio;
- u32 tmp, fclk, BDRI;
+ u32 ratio;
+ u32 tmp, fclk, BDRI;
- static const u32 bands[]={5000000UL,15000000UL,90999000UL/2};
- int i;
+ static const u32 bands[]={5000000UL,15000000UL,90999000UL/2};
+ int i;
dprintk("cx24110 debug: entering %s(%d)\n",__FUNCTION__,srate);
- if (srate>90999000UL/2)
- srate=90999000UL/2;
- if (srate<500000)
- srate=500000;
+ if (srate>90999000UL/2)
+ srate=90999000UL/2;
+ if (srate<500000)
+ srate=500000;
- for(i=0;(i<sizeof(bands)/sizeof(bands[0]))&&(srate>bands[i]);i++)
+ for(i=0;(i<sizeof(bands)/sizeof(bands[0]))&&(srate>bands[i]);i++)
;
- /* first, check which sample rate is appropriate: 45, 60 80 or 90 MHz,
- and set the PLL accordingly (R07[1:0] Fclk, R06[7:4] PLLmult,
- R06[3:0] PLLphaseDetGain */
- tmp=cx24110_readreg(state,0x07)&0xfc;
- if(srate<90999000UL/4) { /* sample rate 45MHz*/
+ /* first, check which sample rate is appropriate: 45, 60 80 or 90 MHz,
+ and set the PLL accordingly (R07[1:0] Fclk, R06[7:4] PLLmult,
+ R06[3:0] PLLphaseDetGain */
+ tmp=cx24110_readreg(state,0x07)&0xfc;
+ if(srate<90999000UL/4) { /* sample rate 45MHz*/
cx24110_writereg(state,0x07,tmp);
cx24110_writereg(state,0x06,0x78);
fclk=90999000UL/2;
- } else if(srate<60666000UL/2) { /* sample rate 60MHz */
+ } else if(srate<60666000UL/2) { /* sample rate 60MHz */
cx24110_writereg(state,0x07,tmp|0x1);
cx24110_writereg(state,0x06,0xa5);
fclk=60666000UL;
- } else if(srate<80888000UL/2) { /* sample rate 80MHz */
+ } else if(srate<80888000UL/2) { /* sample rate 80MHz */
cx24110_writereg(state,0x07,tmp|0x2);
cx24110_writereg(state,0x06,0x87);
fclk=80888000UL;
- } else { /* sample rate 90MHz */
+ } else { /* sample rate 90MHz */
cx24110_writereg(state,0x07,tmp|0x3);
cx24110_writereg(state,0x06,0x78);
fclk=90999000UL;
- };
- dprintk("cx24110 debug: fclk %d Hz\n",fclk);
- /* we need to divide two integers with approx. 27 bits in 32 bit
- arithmetic giving a 25 bit result */
- /* the maximum dividend is 90999000/2, 0x02b6446c, this number is
- also the most complex divisor. Hence, the dividend has,
- assuming 32bit unsigned arithmetic, 6 clear bits on top, the
- divisor 2 unused bits at the bottom. Also, the quotient is
- always less than 1/2. Borrowed from VES1893.c, of course */
+ };
+ dprintk("cx24110 debug: fclk %d Hz\n",fclk);
+ /* we need to divide two integers with approx. 27 bits in 32 bit
+ arithmetic giving a 25 bit result */
+ /* the maximum dividend is 90999000/2, 0x02b6446c, this number is
+ also the most complex divisor. Hence, the dividend has,
+ assuming 32bit unsigned arithmetic, 6 clear bits on top, the
+ divisor 2 unused bits at the bottom. Also, the quotient is
+ always less than 1/2. Borrowed from VES1893.c, of course */
- tmp=srate<<6;
- BDRI=fclk>>2;
- ratio=(tmp/BDRI);
+ tmp=srate<<6;
+ BDRI=fclk>>2;
+ ratio=(tmp/BDRI);
- tmp=(tmp%BDRI)<<8;
- ratio=(ratio<<8)+(tmp/BDRI);
+ tmp=(tmp%BDRI)<<8;
+ ratio=(ratio<<8)+(tmp/BDRI);
- tmp=(tmp%BDRI)<<8;
- ratio=(ratio<<8)+(tmp/BDRI);
+ tmp=(tmp%BDRI)<<8;
+ ratio=(ratio<<8)+(tmp/BDRI);
- tmp=(tmp%BDRI)<<1;
- ratio=(ratio<<1)+(tmp/BDRI);
+ tmp=(tmp%BDRI)<<1;
+ ratio=(ratio<<1)+(tmp/BDRI);
- dprintk("srate= %d (range %d, up to %d)\n", srate,i,bands[i]);
- dprintk("fclk = %d\n", fclk);
- dprintk("ratio= %08x\n", ratio);
+ dprintk("srate= %d (range %d, up to %d)\n", srate,i,bands[i]);
+ dprintk("fclk = %d\n", fclk);
+ dprintk("ratio= %08x\n", ratio);
- cx24110_writereg(state, 0x1, (ratio>>16)&0xff);
- cx24110_writereg(state, 0x2, (ratio>>8)&0xff);
- cx24110_writereg(state, 0x3, (ratio)&0xff);
+ cx24110_writereg(state, 0x1, (ratio>>16)&0xff);
+ cx24110_writereg(state, 0x2, (ratio>>8)&0xff);
+ cx24110_writereg(state, 0x3, (ratio)&0xff);
- return 0;
+ return 0;
}
@@ -324,48 +324,48 @@
dprintk("cx24110 debug: cx24108_write(%8.8x)\n",data);
- cx24110_writereg(state,0x6d,0x30); /* auto mode at 62kHz */
- cx24110_writereg(state,0x70,0x15); /* auto mode 21 bits */
+ cx24110_writereg(state,0x6d,0x30); /* auto mode at 62kHz */
+ cx24110_writereg(state,0x70,0x15); /* auto mode 21 bits */
- /* if the auto tuner writer is still busy, clear it out */
- while (cx24110_readreg(state,0x6d)&0x80)
+ /* if the auto tuner writer is still busy, clear it out */
+ while (cx24110_readreg(state,0x6d)&0x80)
cx24110_writereg(state,0x72,0);
- /* write the topmost 8 bits */
- cx24110_writereg(state,0x72,(data>>24)&0xff);
+ /* write the topmost 8 bits */
+ cx24110_writereg(state,0x72,(data>>24)&0xff);
- /* wait for the send to be completed */
- while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
+ /* wait for the send to be completed */
+ while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
;
- /* send another 8 bytes */
- cx24110_writereg(state,0x72,(data>>16)&0xff);
- while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
+ /* send another 8 bytes */
+ cx24110_writereg(state,0x72,(data>>16)&0xff);
+ while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
;
- /* and the topmost 5 bits of this byte */
- cx24110_writereg(state,0x72,(data>>8)&0xff);
- while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
+ /* and the topmost 5 bits of this byte */
+ cx24110_writereg(state,0x72,(data>>8)&0xff);
+ while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
;
- /* now strobe the enable line once */
- cx24110_writereg(state,0x6d,0x32);
- cx24110_writereg(state,0x6d,0x30);
+ /* now strobe the enable line once */
+ cx24110_writereg(state,0x6d,0x32);
+ cx24110_writereg(state,0x6d,0x30);
- return 0;
+ return 0;
}
static int cx24110_initfe(struct dvb_frontend* fe)
{
struct cx24110_state *state = fe->demodulator_priv;
/* fixme (low): error handling */
- int i;
+ int i;
dprintk("%s: init chip\n", __FUNCTION__);
- for(i=0;i<sizeof(cx24110_regdata)/sizeof(cx24110_regdata[0]);i++) {
+ for(i=0;i<sizeof(cx24110_regdata)/sizeof(cx24110_regdata[0]);i++) {
cx24110_writereg(state, cx24110_regdata[i].reg, cx24110_regdata[i].data);
- };
+ };
if (state->config->pll_init) state->config->pll_init(fe);
diff --git a/drivers/media/dvb/frontends/l64781.c b/drivers/media/dvb/frontends/l64781.c
index 19b4bf7..1c7c912 100644
--- a/drivers/media/dvb/frontends/l64781.c
+++ b/drivers/media/dvb/frontends/l64781.c
@@ -2,7 +2,7 @@
driver for LSI L64781 COFDM demodulator
Copyright (C) 2001 Holger Waechtler for Convergence Integrated Media GmbH
- Marko Kohtala <marko.kohtala@luukku.com>
+ Marko Kohtala <marko.kohtala@luukku.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -433,7 +433,7 @@
{
struct l64781_state* state = fe->demodulator_priv;
- reset_and_configure (state);
+ reset_and_configure (state);
/* Power up */
l64781_writereg (state, 0x3e, 0xa5);
@@ -456,9 +456,9 @@
l64781_writereg (state, 0x0d, 0x8c);
/* With ppm=8000, it seems the DTR_SENSITIVITY will result in
- value of 2 with all possible bandwidths and guard
- intervals, which is the initial value anyway. */
- /*l64781_writereg (state, 0x19, 0x92);*/
+ value of 2 with all possible bandwidths and guard
+ intervals, which is the initial value anyway. */
+ /*l64781_writereg (state, 0x19, 0x92);*/
/* Everything is two's complement, soft bit and CSI_OUT too */
l64781_writereg (state, 0x1e, 0x09);
@@ -477,10 +477,10 @@
static int l64781_get_tune_settings(struct dvb_frontend* fe,
struct dvb_frontend_tune_settings* fesettings)
{
- fesettings->min_delay_ms = 4000;
- fesettings->step_size = 0;
- fesettings->max_drift = 0;
- return 0;
+ fesettings->min_delay_ms = 4000;
+ fesettings->step_size = 0;
+ fesettings->max_drift = 0;
+ return 0;
}
static void l64781_release(struct dvb_frontend* fe)
@@ -522,7 +522,7 @@
/* The chip always responds to reads */
if (i2c_transfer(state->i2c, msg, 2) != 2) {
- dprintk("No response to read on I2C bus\n");
+ dprintk("No response to read on I2C bus\n");
goto error;
}
@@ -531,7 +531,7 @@
/* Reading the POWER_DOWN register always returns 0 */
if (reg0x3e != 0) {
- dprintk("Device doesn't look like L64781\n");
+ dprintk("Device doesn't look like L64781\n");
goto error;
}
@@ -540,7 +540,7 @@
/* Responds to all reads with 0 */
if (l64781_readreg(state, 0x1a) != 0) {
- dprintk("Read 1 returned unexpcted value\n");
+ dprintk("Read 1 returned unexpcted value\n");
goto error;
}
@@ -549,7 +549,7 @@
/* Responds with register default value */
if (l64781_readreg(state, 0x1a) != 0xa1) {
- dprintk("Read 2 returned unexpcted value\n");
+ dprintk("Read 2 returned unexpcted value\n");
goto error;
}
diff --git a/drivers/media/dvb/frontends/l64781.h b/drivers/media/dvb/frontends/l64781.h
index 7e30fb0..947f65f 100644
--- a/drivers/media/dvb/frontends/l64781.h
+++ b/drivers/media/dvb/frontends/l64781.h
@@ -2,7 +2,7 @@
driver for LSI L64781 COFDM demodulator
Copyright (C) 2001 Holger Waechtler for Convergence Integrated Media GmbH
- Marko Kohtala <marko.kohtala@luukku.com>
+ Marko Kohtala <marko.kohtala@luukku.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/dvb/frontends/lgdt330x.c b/drivers/media/dvb/frontends/lgdt330x.c
index 6a33f5a..cb5301865 100644
--- a/drivers/media/dvb/frontends/lgdt330x.c
+++ b/drivers/media/dvb/frontends/lgdt330x.c
@@ -301,10 +301,10 @@
static u8 lgdt3303_8vsb_44_data[] = {
0x04, 0x00,
0x0d, 0x40,
- 0x0e, 0x87,
- 0x0f, 0x8e,
- 0x10, 0x01,
- 0x47, 0x8b };
+ 0x0e, 0x87,
+ 0x0f, 0x8e,
+ 0x10, 0x01,
+ 0x47, 0x8b };
/*
* Array of byte pairs <address, value>
diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c
index 9c67f40..8d67228 100644
--- a/drivers/media/dvb/frontends/mt312.c
+++ b/drivers/media/dvb/frontends/mt312.c
@@ -554,7 +554,7 @@
if ((ret = mt312_write(state, SYM_RATE_H, buf, sizeof(buf))) < 0)
return ret;
- mt312_reset(state, 0);
+ mt312_reset(state, 0);
return 0;
}
@@ -695,7 +695,7 @@
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_MUTE_TS |
- FE_CAN_RECOVER
+ FE_CAN_RECOVER
},
.release = mt312_release,
diff --git a/drivers/media/dvb/frontends/nxt2002.c b/drivers/media/dvb/frontends/nxt2002.c
index 30786b1..52c4160 100644
--- a/drivers/media/dvb/frontends/nxt2002.c
+++ b/drivers/media/dvb/frontends/nxt2002.c
@@ -527,7 +527,7 @@
else
snrdb = 1000*0 + ( 1000*(12-0) * ( temp2 - 0 ) / ( 0x7C00 - 0 ) );
- /* the value reported back from the frontend will be FFFF=32db 0000=0db */
+ /* the value reported back from the frontend will be FFFF=32db 0000=0db */
*snr = snrdb * (0xFFFF/32000);
@@ -646,7 +646,7 @@
memcpy(&state->ops, &nxt2002_ops, sizeof(struct dvb_frontend_ops));
state->initialised = 0;
- /* Check the first 5 registers to ensure this a revision we can handle */
+ /* Check the first 5 registers to ensure this a revision we can handle */
i2c_readbytes(state, 0x00, buf, 5);
if (buf[0] != 0x04) goto error; /* device id */
@@ -672,7 +672,7 @@
.type = FE_ATSC,
.frequency_min = 54000000,
.frequency_max = 860000000,
- /* stepsize is just a guess */
+ /* stepsize is just a guess */
.frequency_stepsize = 166666,
.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
diff --git a/drivers/media/dvb/frontends/nxt200x.c b/drivers/media/dvb/frontends/nxt200x.c
index 84b6288..aeafef4 100644
--- a/drivers/media/dvb/frontends/nxt200x.c
+++ b/drivers/media/dvb/frontends/nxt200x.c
@@ -339,7 +339,7 @@
switch (state->demod_chip) {
case NXT2004:
if (i2c_writebytes(state, state->config->pll_address, data, 4))
- printk(KERN_WARNING "nxt200x: error writing to tuner\n");
+ printk(KERN_WARNING "nxt200x: error writing to tuner\n");
/* wait until we have a lock */
while (count < 20) {
i2c_readbytes(state, state->config->pll_address, &buf, 1);
@@ -497,7 +497,7 @@
/* calculate firmware CRC */
for (position = 0; position < fw->size; position++) {
- crc = nxt200x_crc(crc, fw->data[position]);
+ crc = nxt200x_crc(crc, fw->data[position]);
}
buf[0] = rambase >> 8;
diff --git a/drivers/media/dvb/frontends/nxt6000.c b/drivers/media/dvb/frontends/nxt6000.c
index 88a57b7..a458a3b 100644
--- a/drivers/media/dvb/frontends/nxt6000.c
+++ b/drivers/media/dvb/frontends/nxt6000.c
@@ -574,11 +574,11 @@
.symbol_rate_max = 9360000, /* FIXME */
.symbol_rate_tolerance = 4000,
.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
- FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
- FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
- FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
- FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
- FE_CAN_HIERARCHY_AUTO,
+ FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
+ FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
+ FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+ FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
+ FE_CAN_HIERARCHY_AUTO,
},
.release = nxt6000_release,
diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c
index 78bded8..80e0f28 100644
--- a/drivers/media/dvb/frontends/or51132.c
+++ b/drivers/media/dvb/frontends/or51132.c
@@ -503,7 +503,7 @@
rcvr_stat = rec_buf[1];
usK = (rcvr_stat & 0x10) ? 3 : 0;
- /* The value reported back from the frontend will be FFFF=100% 0000=0% */
+ /* The value reported back from the frontend will be FFFF=100% 0000=0% */
signal_strength = (((8952 - i20Log10(snr_equ) - usK*100)/3+5)*65535)/1000;
if (signal_strength > 0xffff)
*strength = 0xffff;
diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c
index f265418..1871509 100644
--- a/drivers/media/dvb/frontends/s5h1420.c
+++ b/drivers/media/dvb/frontends/s5h1420.c
@@ -494,7 +494,7 @@
}
static void s5h1420_setfec_inversion(struct s5h1420_state* state,
- struct dvb_frontend_parameters *p)
+ struct dvb_frontend_parameters *p)
{
u8 inversion = 0;
@@ -521,8 +521,8 @@
case FEC_3_4:
s5h1420_writereg(state, 0x30, 0x04);
- s5h1420_writereg(state, 0x31, 0x12 | inversion);
- break;
+ s5h1420_writereg(state, 0x31, 0x12 | inversion);
+ break;
case FEC_5_6:
s5h1420_writereg(state, 0x30, 0x08);
diff --git a/drivers/media/dvb/frontends/s5h1420.h b/drivers/media/dvb/frontends/s5h1420.h
index 872028d..73296f1 100644
--- a/drivers/media/dvb/frontends/s5h1420.h
+++ b/drivers/media/dvb/frontends/s5h1420.h
@@ -39,6 +39,6 @@
};
extern struct dvb_frontend* s5h1420_attach(const struct s5h1420_config* config,
- struct i2c_adapter* i2c);
+ struct i2c_adapter* i2c);
#endif // S5H1420_H
diff --git a/drivers/media/dvb/frontends/sp8870.c b/drivers/media/dvb/frontends/sp8870.c
index 1c6b2e9..fc06cd6 100644
--- a/drivers/media/dvb/frontends/sp8870.c
+++ b/drivers/media/dvb/frontends/sp8870.c
@@ -67,16 +67,16 @@
static int sp8870_writereg (struct sp8870_state* state, u16 reg, u16 data)
{
- u8 buf [] = { reg >> 8, reg & 0xff, data >> 8, data & 0xff };
+ u8 buf [] = { reg >> 8, reg & 0xff, data >> 8, data & 0xff };
struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 4 };
int err;
- if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
+ if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __FUNCTION__, err, reg, data);
return -EREMOTEIO;
}
- return 0;
+ return 0;
}
static int sp8870_readreg (struct sp8870_state* state, u16 reg)
@@ -305,7 +305,7 @@
static int sp8870_init (struct dvb_frontend* fe)
{
struct sp8870_state* state = fe->demodulator_priv;
- const struct firmware *fw = NULL;
+ const struct firmware *fw = NULL;
sp8870_wake_up(state);
if (state->initialised) return 0;
@@ -534,10 +534,10 @@
static int sp8870_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
{
- fesettings->min_delay_ms = 350;
- fesettings->step_size = 0;
- fesettings->max_drift = 0;
- return 0;
+ fesettings->min_delay_ms = 350;
+ fesettings->step_size = 0;
+ fesettings->max_drift = 0;
+ return 0;
}
static void sp8870_release(struct dvb_frontend* fe)
diff --git a/drivers/media/dvb/frontends/sp887x.c b/drivers/media/dvb/frontends/sp887x.c
index 73384e7..e3b6657 100644
--- a/drivers/media/dvb/frontends/sp887x.c
+++ b/drivers/media/dvb/frontends/sp887x.c
@@ -80,7 +80,7 @@
u8 b1 [2];
int ret;
struct i2c_msg msg[] = {{ .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 },
- { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 }};
+ { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 }};
if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) {
printk("%s: readreg error (ret == %i)\n", __FUNCTION__, ret);
@@ -498,7 +498,7 @@
static int sp887x_init(struct dvb_frontend* fe)
{
struct sp887x_state* state = fe->demodulator_priv;
- const struct firmware *fw = NULL;
+ const struct firmware *fw = NULL;
int ret;
if (!state->initialised) {
@@ -528,10 +528,10 @@
static int sp887x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
{
- fesettings->min_delay_ms = 350;
- fesettings->step_size = 166666*2;
- fesettings->max_drift = (166666*2)+1;
- return 0;
+ fesettings->min_delay_ms = 350;
+ fesettings->step_size = 166666*2;
+ fesettings->max_drift = (166666*2)+1;
+ return 0;
}
static void sp887x_release(struct dvb_frontend* fe)
@@ -581,7 +581,7 @@
.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
- FE_CAN_RECOVER
+ FE_CAN_RECOVER
},
.release = sp887x_release,
diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c
index 29c4866..177d71d 100644
--- a/drivers/media/dvb/frontends/stv0299.c
+++ b/drivers/media/dvb/frontends/stv0299.c
@@ -95,7 +95,7 @@
int stv0299_writereg (struct dvb_frontend* fe, u8 reg, u8 data)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
return stv0299_writeregI(state, reg, data);
}
@@ -220,7 +220,7 @@
static int stv0299_set_symbolrate (struct dvb_frontend* fe, u32 srate)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
u64 big = srate;
u32 ratio;
@@ -271,7 +271,7 @@
static int stv0299_send_diseqc_msg (struct dvb_frontend* fe,
struct dvb_diseqc_master_cmd *m)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
u8 val;
int i;
@@ -301,7 +301,7 @@
static int stv0299_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
u8 val;
dprintk ("%s\n", __FUNCTION__);
@@ -328,7 +328,7 @@
static int stv0299_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
u8 val;
if (stv0299_wait_diseqc_idle (state, 100) < 0)
@@ -350,7 +350,7 @@
static int stv0299_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
u8 reg0x08;
u8 reg0x0c;
@@ -442,7 +442,7 @@
static int stv0299_init (struct dvb_frontend* fe)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
int i;
dprintk("stv0299: init chip\n");
@@ -461,7 +461,7 @@
static int stv0299_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
u8 signal = 0xff - stv0299_readreg (state, 0x18);
u8 sync = stv0299_readreg (state, 0x1b);
@@ -489,7 +489,7 @@
static int stv0299_read_ber(struct dvb_frontend* fe, u32* ber)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
if (state->errmode != STATUS_BER) return 0;
*ber = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e);
@@ -499,7 +499,7 @@
static int stv0299_read_signal_strength(struct dvb_frontend* fe, u16* strength)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
s32 signal = 0xffff - ((stv0299_readreg (state, 0x18) << 8)
| stv0299_readreg (state, 0x19));
@@ -516,7 +516,7 @@
static int stv0299_read_snr(struct dvb_frontend* fe, u16* snr)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
s32 xsnr = 0xffff - ((stv0299_readreg (state, 0x24) << 8)
| stv0299_readreg (state, 0x25));
@@ -528,7 +528,7 @@
static int stv0299_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
if (state->errmode != STATUS_UCBLOCKS) *ucblocks = 0;
else *ucblocks = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e);
@@ -538,7 +538,7 @@
static int stv0299_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters * p)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
int invval = 0;
dprintk ("%s : FE_SET_FRONTEND\n", __FUNCTION__);
@@ -571,7 +571,7 @@
static int stv0299_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters * p)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
s32 derot_freq;
int invval;
@@ -596,7 +596,7 @@
static int stv0299_sleep(struct dvb_frontend* fe)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
stv0299_writeregI(state, 0x02, 0x80);
state->initialised = 0;
@@ -606,7 +606,7 @@
static int stv0299_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
fesettings->min_delay_ms = state->config->min_delay_ms;
if (fesettings->parameters.u.qpsk.symbol_rate < 10000000) {
@@ -658,7 +658,7 @@
/* create dvb_frontend */
state->frontend.ops = &state->ops;
- state->frontend.demodulator_priv = state;
+ state->frontend.demodulator_priv = state;
return &state->frontend;
error:
@@ -714,7 +714,7 @@
MODULE_DESCRIPTION("ST STV0299 DVB Demodulator driver");
MODULE_AUTHOR("Ralph Metzler, Holger Waechtler, Peter Schildmann, Felix Domke, "
- "Andreas Oberritter, Andrew de Quincey, Kenneth Aafløy");
+ "Andreas Oberritter, Andrew de Quincey, Kenneth Aafløy");
MODULE_LICENSE("GPL");
EXPORT_SYMBOL(stv0299_writereg);
diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c
index eaf130e..425cd19 100644
--- a/drivers/media/dvb/frontends/tda10021.c
+++ b/drivers/media/dvb/frontends/tda10021.c
@@ -1,10 +1,10 @@
/*
TDA10021 - Single Chip Cable Channel Receiver driver module
- used on the the Siemens DVB-C cards
+ used on the the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
- Support for TDA10021
+ Support for TDA10021
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -76,9 +76,9 @@
static int tda10021_writereg (struct tda10021_state* state, u8 reg, u8 data)
{
- u8 buf[] = { reg, data };
+ u8 buf[] = { reg, data };
struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
- int ret;
+ int ret;
ret = i2c_transfer (state->i2c, &msg, 1);
if (ret != 1)
@@ -95,7 +95,7 @@
u8 b0 [] = { reg };
u8 b1 [] = { 0 };
struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
- { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
+ { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
int ret;
ret = i2c_transfer (state->i2c, msg, 2);
diff --git a/drivers/media/dvb/frontends/tda10021.h b/drivers/media/dvb/frontends/tda10021.h
index 7d6a51c..53be939 100644
--- a/drivers/media/dvb/frontends/tda10021.h
+++ b/drivers/media/dvb/frontends/tda10021.h
@@ -1,10 +1,10 @@
/*
TDA10021 - Single Chip Cable Channel Receiver driver module
- used on the the Siemens DVB-C cards
+ used on the the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
- Support for TDA10021
+ Support for TDA10021
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c
index 7968743..dd02aff 100644
--- a/drivers/media/dvb/frontends/tda1004x.c
+++ b/drivers/media/dvb/frontends/tda1004x.c
@@ -475,7 +475,7 @@
ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE);
if (ret) {
printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n");
- return ret;
+ return ret;
}
tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST
ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN);
diff --git a/drivers/media/dvb/frontends/tda8083.c b/drivers/media/dvb/frontends/tda8083.c
index c05cf186..91baa9c 100644
--- a/drivers/media/dvb/frontends/tda8083.c
+++ b/drivers/media/dvb/frontends/tda8083.c
@@ -66,13 +66,13 @@
u8 buf [] = { reg, data };
struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
- ret = i2c_transfer(state->i2c, &msg, 1);
+ ret = i2c_transfer(state->i2c, &msg, 1);
- if (ret != 1)
- dprintk ("%s: writereg error (reg %02x, ret == %i)\n",
+ if (ret != 1)
+ dprintk ("%s: writereg error (reg %02x, ret == %i)\n",
__FUNCTION__, reg, ret);
- return (ret != 1) ? -1 : 0;
+ return (ret != 1) ? -1 : 0;
}
static int tda8083_readregs (struct tda8083_state* state, u8 reg1, u8 *b, u8 len)
@@ -87,7 +87,7 @@
dprintk ("%s: readreg error (reg %02x, ret == %i)\n",
__FUNCTION__, reg1, ret);
- return ret == 2 ? 0 : -1;
+ return ret == 2 ? 0 : -1;
}
static inline u8 tda8083_readreg (struct tda8083_state* state, u8 reg)
@@ -132,14 +132,14 @@
static int tda8083_set_symbolrate (struct tda8083_state* state, u32 srate)
{
- u32 ratio;
+ u32 ratio;
u32 tmp;
u8 filter;
if (srate > 32000000)
- srate = 32000000;
- if (srate < 500000)
- srate = 500000;
+ srate = 32000000;
+ if (srate < 500000)
+ srate = 500000;
filter = 0;
if (srate < 24000000)
@@ -174,7 +174,7 @@
unsigned long start = jiffies;
while (jiffies - start < timeout &&
- !(tda8083_readreg(state, 0x02) & 0x80))
+ !(tda8083_readreg(state, 0x02) & 0x80))
{
msleep(50);
};