Merge branch 'wl12xx-next' into for-linville
diff --git a/MAINTAINERS b/MAINTAINERS
index 3adbbb2..073a7b8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6660,6 +6660,16 @@
S: Maintained
F: sound/soc/codecs/twl4030*
+TI WILINK WIRELESS DRIVERS
+M: Luciano Coelho <coelho@ti.com>
+L: linux-wireless@vger.kernel.org
+W: http://wireless.kernel.org/en/users/Drivers/wl12xx
+W: http://wireless.kernel.org/en/users/Drivers/wl1251
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git
+S: Maintained
+F: drivers/net/wireless/ti/
+F: include/linux/wl12xx.h
+
TIPC NETWORK LAYER
M: Jon Maloy <jon.maloy@ericsson.com>
M: Allan Stephens <allan.stephens@windriver.com>
@@ -7416,23 +7426,6 @@
S: Maintained
F: drivers/input/misc/wistron_btns.c
-WL1251 WIRELESS DRIVER
-M: Luciano Coelho <coelho@ti.com>
-L: linux-wireless@vger.kernel.org
-W: http://wireless.kernel.org/en/users/Drivers/wl1251
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
-S: Maintained
-F: drivers/net/wireless/wl1251/*
-
-WL1271 WIRELESS DRIVER
-M: Luciano Coelho <coelho@ti.com>
-L: linux-wireless@vger.kernel.org
-W: http://wireless.kernel.org/en/users/Drivers/wl12xx
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git
-S: Maintained
-F: drivers/net/wireless/wl12xx/
-F: include/linux/wl12xx.h
-
WL3501 WIRELESS PCMCIA CARD DRIVER
M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
L: linux-wireless@vger.kernel.org
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index abd3b71..5f58fa5 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -282,8 +282,7 @@
source "drivers/net/wireless/p54/Kconfig"
source "drivers/net/wireless/rt2x00/Kconfig"
source "drivers/net/wireless/rtlwifi/Kconfig"
-source "drivers/net/wireless/wl1251/Kconfig"
-source "drivers/net/wireless/wl12xx/Kconfig"
+source "drivers/net/wireless/ti/Kconfig"
source "drivers/net/wireless/zd1211rw/Kconfig"
source "drivers/net/wireless/mwifiex/Kconfig"
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 98db7619..0ce218b 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -51,9 +51,7 @@
obj-$(CONFIG_MAC80211_HWSIM) += mac80211_hwsim.o
-obj-$(CONFIG_WL1251) += wl1251/
-obj-$(CONFIG_WL12XX) += wl12xx/
-obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wl12xx/
+obj-$(CONFIG_WL_TI) += ti/
obj-$(CONFIG_IWM) += iwmc3200wifi/
diff --git a/drivers/net/wireless/ti/Kconfig b/drivers/net/wireless/ti/Kconfig
new file mode 100644
index 0000000..1a72932
--- /dev/null
+++ b/drivers/net/wireless/ti/Kconfig
@@ -0,0 +1,14 @@
+menuconfig WL_TI
+ bool "TI Wireless LAN support"
+ ---help---
+ This section contains support for all the wireless drivers
+ for Texas Instruments WLAN chips, such as wl1251 and the wl12xx
+ family.
+
+if WL_TI
+source "drivers/net/wireless/ti/wl1251/Kconfig"
+source "drivers/net/wireless/ti/wl12xx/Kconfig"
+
+# keep last for automatic dependencies
+source "drivers/net/wireless/ti/wlcore/Kconfig"
+endif # WL_TI
diff --git a/drivers/net/wireless/ti/Makefile b/drivers/net/wireless/ti/Makefile
new file mode 100644
index 0000000..0a56562
--- /dev/null
+++ b/drivers/net/wireless/ti/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_WLCORE) += wlcore/
+obj-$(CONFIG_WL12XX) += wl12xx/
+obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wlcore/
+obj-$(CONFIG_WL1251) += wl1251/
diff --git a/drivers/net/wireless/wl1251/Kconfig b/drivers/net/wireless/ti/wl1251/Kconfig
similarity index 100%
rename from drivers/net/wireless/wl1251/Kconfig
rename to drivers/net/wireless/ti/wl1251/Kconfig
diff --git a/drivers/net/wireless/wl1251/Makefile b/drivers/net/wireless/ti/wl1251/Makefile
similarity index 100%
rename from drivers/net/wireless/wl1251/Makefile
rename to drivers/net/wireless/ti/wl1251/Makefile
diff --git a/drivers/net/wireless/wl1251/acx.c b/drivers/net/wireless/ti/wl1251/acx.c
similarity index 100%
rename from drivers/net/wireless/wl1251/acx.c
rename to drivers/net/wireless/ti/wl1251/acx.c
diff --git a/drivers/net/wireless/wl1251/acx.h b/drivers/net/wireless/ti/wl1251/acx.h
similarity index 100%
rename from drivers/net/wireless/wl1251/acx.h
rename to drivers/net/wireless/ti/wl1251/acx.h
diff --git a/drivers/net/wireless/wl1251/boot.c b/drivers/net/wireless/ti/wl1251/boot.c
similarity index 100%
rename from drivers/net/wireless/wl1251/boot.c
rename to drivers/net/wireless/ti/wl1251/boot.c
diff --git a/drivers/net/wireless/wl1251/boot.h b/drivers/net/wireless/ti/wl1251/boot.h
similarity index 100%
rename from drivers/net/wireless/wl1251/boot.h
rename to drivers/net/wireless/ti/wl1251/boot.h
diff --git a/drivers/net/wireless/wl1251/cmd.c b/drivers/net/wireless/ti/wl1251/cmd.c
similarity index 100%
rename from drivers/net/wireless/wl1251/cmd.c
rename to drivers/net/wireless/ti/wl1251/cmd.c
diff --git a/drivers/net/wireless/wl1251/cmd.h b/drivers/net/wireless/ti/wl1251/cmd.h
similarity index 100%
rename from drivers/net/wireless/wl1251/cmd.h
rename to drivers/net/wireless/ti/wl1251/cmd.h
diff --git a/drivers/net/wireless/wl1251/debugfs.c b/drivers/net/wireless/ti/wl1251/debugfs.c
similarity index 100%
rename from drivers/net/wireless/wl1251/debugfs.c
rename to drivers/net/wireless/ti/wl1251/debugfs.c
diff --git a/drivers/net/wireless/wl1251/debugfs.h b/drivers/net/wireless/ti/wl1251/debugfs.h
similarity index 100%
rename from drivers/net/wireless/wl1251/debugfs.h
rename to drivers/net/wireless/ti/wl1251/debugfs.h
diff --git a/drivers/net/wireless/wl1251/event.c b/drivers/net/wireless/ti/wl1251/event.c
similarity index 100%
rename from drivers/net/wireless/wl1251/event.c
rename to drivers/net/wireless/ti/wl1251/event.c
diff --git a/drivers/net/wireless/wl1251/event.h b/drivers/net/wireless/ti/wl1251/event.h
similarity index 100%
rename from drivers/net/wireless/wl1251/event.h
rename to drivers/net/wireless/ti/wl1251/event.h
diff --git a/drivers/net/wireless/wl1251/init.c b/drivers/net/wireless/ti/wl1251/init.c
similarity index 100%
rename from drivers/net/wireless/wl1251/init.c
rename to drivers/net/wireless/ti/wl1251/init.c
diff --git a/drivers/net/wireless/wl1251/init.h b/drivers/net/wireless/ti/wl1251/init.h
similarity index 100%
rename from drivers/net/wireless/wl1251/init.h
rename to drivers/net/wireless/ti/wl1251/init.h
diff --git a/drivers/net/wireless/wl1251/io.c b/drivers/net/wireless/ti/wl1251/io.c
similarity index 100%
rename from drivers/net/wireless/wl1251/io.c
rename to drivers/net/wireless/ti/wl1251/io.c
diff --git a/drivers/net/wireless/wl1251/io.h b/drivers/net/wireless/ti/wl1251/io.h
similarity index 100%
rename from drivers/net/wireless/wl1251/io.h
rename to drivers/net/wireless/ti/wl1251/io.h
diff --git a/drivers/net/wireless/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c
similarity index 100%
rename from drivers/net/wireless/wl1251/main.c
rename to drivers/net/wireless/ti/wl1251/main.c
diff --git a/drivers/net/wireless/wl1251/ps.c b/drivers/net/wireless/ti/wl1251/ps.c
similarity index 100%
rename from drivers/net/wireless/wl1251/ps.c
rename to drivers/net/wireless/ti/wl1251/ps.c
diff --git a/drivers/net/wireless/wl1251/ps.h b/drivers/net/wireless/ti/wl1251/ps.h
similarity index 100%
rename from drivers/net/wireless/wl1251/ps.h
rename to drivers/net/wireless/ti/wl1251/ps.h
diff --git a/drivers/net/wireless/wl1251/reg.h b/drivers/net/wireless/ti/wl1251/reg.h
similarity index 100%
rename from drivers/net/wireless/wl1251/reg.h
rename to drivers/net/wireless/ti/wl1251/reg.h
diff --git a/drivers/net/wireless/wl1251/rx.c b/drivers/net/wireless/ti/wl1251/rx.c
similarity index 100%
rename from drivers/net/wireless/wl1251/rx.c
rename to drivers/net/wireless/ti/wl1251/rx.c
diff --git a/drivers/net/wireless/wl1251/rx.h b/drivers/net/wireless/ti/wl1251/rx.h
similarity index 100%
rename from drivers/net/wireless/wl1251/rx.h
rename to drivers/net/wireless/ti/wl1251/rx.h
diff --git a/drivers/net/wireless/wl1251/sdio.c b/drivers/net/wireless/ti/wl1251/sdio.c
similarity index 100%
rename from drivers/net/wireless/wl1251/sdio.c
rename to drivers/net/wireless/ti/wl1251/sdio.c
diff --git a/drivers/net/wireless/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c
similarity index 100%
rename from drivers/net/wireless/wl1251/spi.c
rename to drivers/net/wireless/ti/wl1251/spi.c
diff --git a/drivers/net/wireless/wl1251/spi.h b/drivers/net/wireless/ti/wl1251/spi.h
similarity index 100%
rename from drivers/net/wireless/wl1251/spi.h
rename to drivers/net/wireless/ti/wl1251/spi.h
diff --git a/drivers/net/wireless/wl1251/tx.c b/drivers/net/wireless/ti/wl1251/tx.c
similarity index 100%
rename from drivers/net/wireless/wl1251/tx.c
rename to drivers/net/wireless/ti/wl1251/tx.c
diff --git a/drivers/net/wireless/wl1251/tx.h b/drivers/net/wireless/ti/wl1251/tx.h
similarity index 100%
rename from drivers/net/wireless/wl1251/tx.h
rename to drivers/net/wireless/ti/wl1251/tx.h
diff --git a/drivers/net/wireless/wl1251/wl1251.h b/drivers/net/wireless/ti/wl1251/wl1251.h
similarity index 100%
rename from drivers/net/wireless/wl1251/wl1251.h
rename to drivers/net/wireless/ti/wl1251/wl1251.h
diff --git a/drivers/net/wireless/wl1251/wl12xx_80211.h b/drivers/net/wireless/ti/wl1251/wl12xx_80211.h
similarity index 100%
rename from drivers/net/wireless/wl1251/wl12xx_80211.h
rename to drivers/net/wireless/ti/wl1251/wl12xx_80211.h
diff --git a/drivers/net/wireless/ti/wl12xx/Kconfig b/drivers/net/wireless/ti/wl12xx/Kconfig
new file mode 100644
index 0000000..5b92329
--- /dev/null
+++ b/drivers/net/wireless/ti/wl12xx/Kconfig
@@ -0,0 +1,8 @@
+config WL12XX
+ tristate "TI wl12xx support"
+ select WLCORE
+ ---help---
+ This module adds support for wireless adapters based on TI wl1271,
+ wl1273, wl1281 and wl1283 chipsets. This module does *not* include
+ support for wl1251. For wl1251 support, use the separate homonymous
+ driver instead.
diff --git a/drivers/net/wireless/ti/wl12xx/Makefile b/drivers/net/wireless/ti/wl12xx/Makefile
new file mode 100644
index 0000000..87f64b1
--- /dev/null
+++ b/drivers/net/wireless/ti/wl12xx/Makefile
@@ -0,0 +1,3 @@
+wl12xx-objs = main.o cmd.o acx.o
+
+obj-$(CONFIG_WL12XX) += wl12xx.o
diff --git a/drivers/net/wireless/ti/wl12xx/acx.c b/drivers/net/wireless/ti/wl12xx/acx.c
new file mode 100644
index 0000000..bea06b2
--- /dev/null
+++ b/drivers/net/wireless/ti/wl12xx/acx.c
@@ -0,0 +1,53 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ * Copyright (C) 2011 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "../wlcore/cmd.h"
+#include "../wlcore/debug.h"
+#include "../wlcore/acx.h"
+
+#include "acx.h"
+
+int wl1271_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap)
+{
+ struct wl1271_acx_host_config_bitmap *bitmap_conf;
+ int ret;
+
+ bitmap_conf = kzalloc(sizeof(*bitmap_conf), GFP_KERNEL);
+ if (!bitmap_conf) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ bitmap_conf->host_cfg_bitmap = cpu_to_le32(host_cfg_bitmap);
+
+ ret = wl1271_cmd_configure(wl, ACX_HOST_IF_CFG_BITMAP,
+ bitmap_conf, sizeof(*bitmap_conf));
+ if (ret < 0) {
+ wl1271_warning("wl1271 bitmap config opt failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(bitmap_conf);
+
+ return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/debugfs.h b/drivers/net/wireless/ti/wl12xx/acx.h
similarity index 60%
copy from drivers/net/wireless/wl12xx/debugfs.h
copy to drivers/net/wireless/ti/wl12xx/acx.h
index 254c5b2..d1f5aba 100644
--- a/drivers/net/wireless/wl12xx/debugfs.h
+++ b/drivers/net/wireless/ti/wl12xx/acx.h
@@ -1,9 +1,8 @@
/*
- * This file is part of wl1271
+ * This file is part of wl12xx
*
- * Copyright (C) 2009 Nokia Corporation
- *
- * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ * Copyright (C) 1998-2009, 2011 Texas Instruments. All rights reserved.
+ * Copyright (C) 2008-2010 Nokia Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -21,13 +20,17 @@
*
*/
-#ifndef __DEBUGFS_H__
-#define __DEBUGFS_H__
+#ifndef __WL12XX_ACX_H__
+#define __WL12XX_ACX_H__
-#include "wl12xx.h"
+#include "../wlcore/wlcore.h"
-int wl1271_debugfs_init(struct wl1271 *wl);
-void wl1271_debugfs_exit(struct wl1271 *wl);
-void wl1271_debugfs_reset(struct wl1271 *wl);
+struct wl1271_acx_host_config_bitmap {
+ struct acx_header header;
-#endif /* WL1271_DEBUGFS_H */
+ __le32 host_cfg_bitmap;
+} __packed;
+
+int wl1271_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap);
+
+#endif /* __WL12XX_ACX_H__ */
diff --git a/drivers/net/wireless/ti/wl12xx/cmd.c b/drivers/net/wireless/ti/wl12xx/cmd.c
new file mode 100644
index 0000000..8ffaeb5
--- /dev/null
+++ b/drivers/net/wireless/ti/wl12xx/cmd.c
@@ -0,0 +1,254 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009-2010 Nokia Corporation
+ * Copyright (C) 2011 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "../wlcore/cmd.h"
+#include "../wlcore/debug.h"
+
+#include "wl12xx.h"
+#include "cmd.h"
+
+int wl1271_cmd_ext_radio_parms(struct wl1271 *wl)
+{
+ struct wl1271_ext_radio_parms_cmd *ext_radio_parms;
+ struct wl12xx_priv *priv = wl->priv;
+ struct wl12xx_conf_rf *rf = &priv->conf.rf;
+ int ret;
+
+ if (!wl->nvs)
+ return -ENODEV;
+
+ ext_radio_parms = kzalloc(sizeof(*ext_radio_parms), GFP_KERNEL);
+ if (!ext_radio_parms)
+ return -ENOMEM;
+
+ ext_radio_parms->test.id = TEST_CMD_INI_FILE_RF_EXTENDED_PARAM;
+
+ memcpy(ext_radio_parms->tx_per_channel_power_compensation_2,
+ rf->tx_per_channel_power_compensation_2,
+ CONF_TX_PWR_COMPENSATION_LEN_2);
+ memcpy(ext_radio_parms->tx_per_channel_power_compensation_5,
+ rf->tx_per_channel_power_compensation_5,
+ CONF_TX_PWR_COMPENSATION_LEN_5);
+
+ wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_EXT_RADIO_PARAM: ",
+ ext_radio_parms, sizeof(*ext_radio_parms));
+
+ ret = wl1271_cmd_test(wl, ext_radio_parms, sizeof(*ext_radio_parms), 0);
+ if (ret < 0)
+ wl1271_warning("TEST_CMD_INI_FILE_RF_EXTENDED_PARAM failed");
+
+ kfree(ext_radio_parms);
+ return ret;
+}
+
+int wl1271_cmd_general_parms(struct wl1271 *wl)
+{
+ struct wl1271_general_parms_cmd *gen_parms;
+ struct wl1271_ini_general_params *gp =
+ &((struct wl1271_nvs_file *)wl->nvs)->general_params;
+ bool answer = false;
+ int ret;
+
+ if (!wl->nvs)
+ return -ENODEV;
+
+ if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) {
+ wl1271_warning("FEM index from INI out of bounds");
+ return -EINVAL;
+ }
+
+ gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
+ if (!gen_parms)
+ return -ENOMEM;
+
+ gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM;
+
+ memcpy(&gen_parms->general_params, gp, sizeof(*gp));
+
+ if (gp->tx_bip_fem_auto_detect)
+ answer = true;
+
+ /* Override the REF CLK from the NVS with the one from platform data */
+ gen_parms->general_params.ref_clock = wl->ref_clock;
+
+ ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer);
+ if (ret < 0) {
+ wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
+ goto out;
+ }
+
+ gp->tx_bip_fem_manufacturer =
+ gen_parms->general_params.tx_bip_fem_manufacturer;
+
+ if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) {
+ wl1271_warning("FEM index from FW out of bounds");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ wl1271_debug(DEBUG_CMD, "FEM autodetect: %s, manufacturer: %d\n",
+ answer ? "auto" : "manual", gp->tx_bip_fem_manufacturer);
+
+out:
+ kfree(gen_parms);
+ return ret;
+}
+
+int wl128x_cmd_general_parms(struct wl1271 *wl)
+{
+ struct wl128x_general_parms_cmd *gen_parms;
+ struct wl128x_ini_general_params *gp =
+ &((struct wl128x_nvs_file *)wl->nvs)->general_params;
+ bool answer = false;
+ int ret;
+
+ if (!wl->nvs)
+ return -ENODEV;
+
+ if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) {
+ wl1271_warning("FEM index from ini out of bounds");
+ return -EINVAL;
+ }
+
+ gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
+ if (!gen_parms)
+ return -ENOMEM;
+
+ gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM;
+
+ memcpy(&gen_parms->general_params, gp, sizeof(*gp));
+
+ if (gp->tx_bip_fem_auto_detect)
+ answer = true;
+
+ /* Replace REF and TCXO CLKs with the ones from platform data */
+ gen_parms->general_params.ref_clock = wl->ref_clock;
+ gen_parms->general_params.tcxo_ref_clock = wl->tcxo_clock;
+
+ ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer);
+ if (ret < 0) {
+ wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
+ goto out;
+ }
+
+ gp->tx_bip_fem_manufacturer =
+ gen_parms->general_params.tx_bip_fem_manufacturer;
+
+ if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) {
+ wl1271_warning("FEM index from FW out of bounds");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ wl1271_debug(DEBUG_CMD, "FEM autodetect: %s, manufacturer: %d\n",
+ answer ? "auto" : "manual", gp->tx_bip_fem_manufacturer);
+
+out:
+ kfree(gen_parms);
+ return ret;
+}
+
+int wl1271_cmd_radio_parms(struct wl1271 *wl)
+{
+ struct wl1271_nvs_file *nvs = (struct wl1271_nvs_file *)wl->nvs;
+ struct wl1271_radio_parms_cmd *radio_parms;
+ struct wl1271_ini_general_params *gp = &nvs->general_params;
+ int ret;
+
+ if (!wl->nvs)
+ return -ENODEV;
+
+ radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL);
+ if (!radio_parms)
+ return -ENOMEM;
+
+ radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM;
+
+ /* 2.4GHz parameters */
+ memcpy(&radio_parms->static_params_2, &nvs->stat_radio_params_2,
+ sizeof(struct wl1271_ini_band_params_2));
+ memcpy(&radio_parms->dyn_params_2,
+ &nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params,
+ sizeof(struct wl1271_ini_fem_params_2));
+
+ /* 5GHz parameters */
+ memcpy(&radio_parms->static_params_5,
+ &nvs->stat_radio_params_5,
+ sizeof(struct wl1271_ini_band_params_5));
+ memcpy(&radio_parms->dyn_params_5,
+ &nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params,
+ sizeof(struct wl1271_ini_fem_params_5));
+
+ wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ",
+ radio_parms, sizeof(*radio_parms));
+
+ ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0);
+ if (ret < 0)
+ wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed");
+
+ kfree(radio_parms);
+ return ret;
+}
+
+int wl128x_cmd_radio_parms(struct wl1271 *wl)
+{
+ struct wl128x_nvs_file *nvs = (struct wl128x_nvs_file *)wl->nvs;
+ struct wl128x_radio_parms_cmd *radio_parms;
+ struct wl128x_ini_general_params *gp = &nvs->general_params;
+ int ret;
+
+ if (!wl->nvs)
+ return -ENODEV;
+
+ radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL);
+ if (!radio_parms)
+ return -ENOMEM;
+
+ radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM;
+
+ /* 2.4GHz parameters */
+ memcpy(&radio_parms->static_params_2, &nvs->stat_radio_params_2,
+ sizeof(struct wl128x_ini_band_params_2));
+ memcpy(&radio_parms->dyn_params_2,
+ &nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params,
+ sizeof(struct wl128x_ini_fem_params_2));
+
+ /* 5GHz parameters */
+ memcpy(&radio_parms->static_params_5,
+ &nvs->stat_radio_params_5,
+ sizeof(struct wl128x_ini_band_params_5));
+ memcpy(&radio_parms->dyn_params_5,
+ &nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params,
+ sizeof(struct wl128x_ini_fem_params_5));
+
+ radio_parms->fem_vendor_and_options = nvs->fem_vendor_and_options;
+
+ wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ",
+ radio_parms, sizeof(*radio_parms));
+
+ ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0);
+ if (ret < 0)
+ wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed");
+
+ kfree(radio_parms);
+ return ret;
+}
diff --git a/drivers/net/wireless/ti/wl12xx/cmd.h b/drivers/net/wireless/ti/wl12xx/cmd.h
new file mode 100644
index 0000000..140a0e8
--- /dev/null
+++ b/drivers/net/wireless/ti/wl12xx/cmd.h
@@ -0,0 +1,112 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 1998-2009, 2011 Texas Instruments. All rights reserved.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_CMD_H__
+#define __WL12XX_CMD_H__
+
+#include "conf.h"
+
+#define TEST_CMD_INI_FILE_RADIO_PARAM 0x19
+#define TEST_CMD_INI_FILE_GENERAL_PARAM 0x1E
+
+struct wl1271_general_parms_cmd {
+ struct wl1271_cmd_header header;
+
+ struct wl1271_cmd_test_header test;
+
+ struct wl1271_ini_general_params general_params;
+
+ u8 sr_debug_table[WL1271_INI_MAX_SMART_REFLEX_PARAM];
+ u8 sr_sen_n_p;
+ u8 sr_sen_n_p_gain;
+ u8 sr_sen_nrn;
+ u8 sr_sen_prn;
+ u8 padding[3];
+} __packed;
+
+struct wl128x_general_parms_cmd {
+ struct wl1271_cmd_header header;
+
+ struct wl1271_cmd_test_header test;
+
+ struct wl128x_ini_general_params general_params;
+
+ u8 sr_debug_table[WL1271_INI_MAX_SMART_REFLEX_PARAM];
+ u8 sr_sen_n_p;
+ u8 sr_sen_n_p_gain;
+ u8 sr_sen_nrn;
+ u8 sr_sen_prn;
+ u8 padding[3];
+} __packed;
+
+struct wl1271_radio_parms_cmd {
+ struct wl1271_cmd_header header;
+
+ struct wl1271_cmd_test_header test;
+
+ /* Static radio parameters */
+ struct wl1271_ini_band_params_2 static_params_2;
+ struct wl1271_ini_band_params_5 static_params_5;
+
+ /* Dynamic radio parameters */
+ struct wl1271_ini_fem_params_2 dyn_params_2;
+ u8 padding2;
+ struct wl1271_ini_fem_params_5 dyn_params_5;
+ u8 padding3[2];
+} __packed;
+
+struct wl128x_radio_parms_cmd {
+ struct wl1271_cmd_header header;
+
+ struct wl1271_cmd_test_header test;
+
+ /* Static radio parameters */
+ struct wl128x_ini_band_params_2 static_params_2;
+ struct wl128x_ini_band_params_5 static_params_5;
+
+ u8 fem_vendor_and_options;
+
+ /* Dynamic radio parameters */
+ struct wl128x_ini_fem_params_2 dyn_params_2;
+ u8 padding2;
+ struct wl128x_ini_fem_params_5 dyn_params_5;
+} __packed;
+
+#define TEST_CMD_INI_FILE_RF_EXTENDED_PARAM 0x26
+
+struct wl1271_ext_radio_parms_cmd {
+ struct wl1271_cmd_header header;
+
+ struct wl1271_cmd_test_header test;
+
+ u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2];
+ u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5];
+ u8 padding[3];
+} __packed;
+
+int wl1271_cmd_general_parms(struct wl1271 *wl);
+int wl128x_cmd_general_parms(struct wl1271 *wl);
+int wl1271_cmd_radio_parms(struct wl1271 *wl);
+int wl128x_cmd_radio_parms(struct wl1271 *wl);
+int wl1271_cmd_ext_radio_parms(struct wl1271 *wl);
+
+#endif /* __WL12XX_CMD_H__ */
diff --git a/drivers/net/wireless/ti/wl12xx/conf.h b/drivers/net/wireless/ti/wl12xx/conf.h
new file mode 100644
index 0000000..75e2989
--- /dev/null
+++ b/drivers/net/wireless/ti/wl12xx/conf.h
@@ -0,0 +1,50 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2011 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_CONF_H__
+#define __WL12XX_CONF_H__
+
+/* these are number of channels on the band divided by two, rounded up */
+#define CONF_TX_PWR_COMPENSATION_LEN_2 7
+#define CONF_TX_PWR_COMPENSATION_LEN_5 18
+
+struct wl12xx_conf_rf {
+ /*
+ * Per channel power compensation for 2.4GHz
+ *
+ * Range: s8
+ */
+ u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2];
+
+ /*
+ * Per channel power compensation for 5GHz
+ *
+ * Range: s8
+ */
+ u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5];
+};
+
+struct wl12xx_priv_conf {
+ struct wl12xx_conf_rf rf;
+ struct conf_memory_settings mem_wl127x;
+};
+
+#endif /* __WL12XX_CONF_H__ */
diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
new file mode 100644
index 0000000..d7dd3de
--- /dev/null
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -0,0 +1,1388 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <linux/err.h>
+
+#include <linux/wl12xx.h>
+
+#include "../wlcore/wlcore.h"
+#include "../wlcore/debug.h"
+#include "../wlcore/io.h"
+#include "../wlcore/acx.h"
+#include "../wlcore/tx.h"
+#include "../wlcore/rx.h"
+#include "../wlcore/io.h"
+#include "../wlcore/boot.h"
+
+#include "wl12xx.h"
+#include "reg.h"
+#include "cmd.h"
+#include "acx.h"
+
+static struct wlcore_conf wl12xx_conf = {
+ .sg = {
+ .params = {
+ [CONF_SG_ACL_BT_MASTER_MIN_BR] = 10,
+ [CONF_SG_ACL_BT_MASTER_MAX_BR] = 180,
+ [CONF_SG_ACL_BT_SLAVE_MIN_BR] = 10,
+ [CONF_SG_ACL_BT_SLAVE_MAX_BR] = 180,
+ [CONF_SG_ACL_BT_MASTER_MIN_EDR] = 10,
+ [CONF_SG_ACL_BT_MASTER_MAX_EDR] = 80,
+ [CONF_SG_ACL_BT_SLAVE_MIN_EDR] = 10,
+ [CONF_SG_ACL_BT_SLAVE_MAX_EDR] = 80,
+ [CONF_SG_ACL_WLAN_PS_MASTER_BR] = 8,
+ [CONF_SG_ACL_WLAN_PS_SLAVE_BR] = 8,
+ [CONF_SG_ACL_WLAN_PS_MASTER_EDR] = 20,
+ [CONF_SG_ACL_WLAN_PS_SLAVE_EDR] = 20,
+ [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR] = 20,
+ [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR] = 35,
+ [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR] = 16,
+ [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR] = 35,
+ [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR] = 32,
+ [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR] = 50,
+ [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR] = 28,
+ [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR] = 50,
+ [CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR] = 10,
+ [CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR] = 20,
+ [CONF_SG_ACL_PASSIVE_SCAN_BT_BR] = 75,
+ [CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR] = 15,
+ [CONF_SG_ACL_PASSIVE_SCAN_BT_EDR] = 27,
+ [CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR] = 17,
+ /* active scan params */
+ [CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
+ [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
+ [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100,
+ /* passive scan params */
+ [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR] = 800,
+ [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR] = 200,
+ [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200,
+ /* passive scan in dual antenna params */
+ [CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN] = 0,
+ [CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN] = 0,
+ [CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN] = 0,
+ /* general params */
+ [CONF_SG_STA_FORCE_PS_IN_BT_SCO] = 1,
+ [CONF_SG_ANTENNA_CONFIGURATION] = 0,
+ [CONF_SG_BEACON_MISS_PERCENT] = 60,
+ [CONF_SG_DHCP_TIME] = 5000,
+ [CONF_SG_RXT] = 1200,
+ [CONF_SG_TXT] = 1000,
+ [CONF_SG_ADAPTIVE_RXT_TXT] = 1,
+ [CONF_SG_GENERAL_USAGE_BIT_MAP] = 3,
+ [CONF_SG_HV3_MAX_SERVED] = 6,
+ [CONF_SG_PS_POLL_TIMEOUT] = 10,
+ [CONF_SG_UPSD_TIMEOUT] = 10,
+ [CONF_SG_CONSECUTIVE_CTS_THRESHOLD] = 2,
+ [CONF_SG_STA_RX_WINDOW_AFTER_DTIM] = 5,
+ [CONF_SG_STA_CONNECTION_PROTECTION_TIME] = 30,
+ /* AP params */
+ [CONF_AP_BEACON_MISS_TX] = 3,
+ [CONF_AP_RX_WINDOW_AFTER_BEACON] = 10,
+ [CONF_AP_BEACON_WINDOW_INTERVAL] = 2,
+ [CONF_AP_CONNECTION_PROTECTION_TIME] = 0,
+ [CONF_AP_BT_ACL_VAL_BT_SERVE_TIME] = 25,
+ [CONF_AP_BT_ACL_VAL_WL_SERVE_TIME] = 25,
+ /* CTS Diluting params */
+ [CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH] = 0,
+ [CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER] = 0,
+ },
+ .state = CONF_SG_PROTECTIVE,
+ },
+ .rx = {
+ .rx_msdu_life_time = 512000,
+ .packet_detection_threshold = 0,
+ .ps_poll_timeout = 15,
+ .upsd_timeout = 15,
+ .rts_threshold = IEEE80211_MAX_RTS_THRESHOLD,
+ .rx_cca_threshold = 0,
+ .irq_blk_threshold = 0xFFFF,
+ .irq_pkt_threshold = 0,
+ .irq_timeout = 600,
+ .queue_type = CONF_RX_QUEUE_TYPE_LOW_PRIORITY,
+ },
+ .tx = {
+ .tx_energy_detection = 0,
+ .sta_rc_conf = {
+ .enabled_rates = 0,
+ .short_retry_limit = 10,
+ .long_retry_limit = 10,
+ .aflags = 0,
+ },
+ .ac_conf_count = 4,
+ .ac_conf = {
+ [CONF_TX_AC_BE] = {
+ .ac = CONF_TX_AC_BE,
+ .cw_min = 15,
+ .cw_max = 63,
+ .aifsn = 3,
+ .tx_op_limit = 0,
+ },
+ [CONF_TX_AC_BK] = {
+ .ac = CONF_TX_AC_BK,
+ .cw_min = 15,
+ .cw_max = 63,
+ .aifsn = 7,
+ .tx_op_limit = 0,
+ },
+ [CONF_TX_AC_VI] = {
+ .ac = CONF_TX_AC_VI,
+ .cw_min = 15,
+ .cw_max = 63,
+ .aifsn = CONF_TX_AIFS_PIFS,
+ .tx_op_limit = 3008,
+ },
+ [CONF_TX_AC_VO] = {
+ .ac = CONF_TX_AC_VO,
+ .cw_min = 15,
+ .cw_max = 63,
+ .aifsn = CONF_TX_AIFS_PIFS,
+ .tx_op_limit = 1504,
+ },
+ },
+ .max_tx_retries = 100,
+ .ap_aging_period = 300,
+ .tid_conf_count = 4,
+ .tid_conf = {
+ [CONF_TX_AC_BE] = {
+ .queue_id = CONF_TX_AC_BE,
+ .channel_type = CONF_CHANNEL_TYPE_EDCF,
+ .tsid = CONF_TX_AC_BE,
+ .ps_scheme = CONF_PS_SCHEME_LEGACY,
+ .ack_policy = CONF_ACK_POLICY_LEGACY,
+ .apsd_conf = {0, 0},
+ },
+ [CONF_TX_AC_BK] = {
+ .queue_id = CONF_TX_AC_BK,
+ .channel_type = CONF_CHANNEL_TYPE_EDCF,
+ .tsid = CONF_TX_AC_BK,
+ .ps_scheme = CONF_PS_SCHEME_LEGACY,
+ .ack_policy = CONF_ACK_POLICY_LEGACY,
+ .apsd_conf = {0, 0},
+ },
+ [CONF_TX_AC_VI] = {
+ .queue_id = CONF_TX_AC_VI,
+ .channel_type = CONF_CHANNEL_TYPE_EDCF,
+ .tsid = CONF_TX_AC_VI,
+ .ps_scheme = CONF_PS_SCHEME_LEGACY,
+ .ack_policy = CONF_ACK_POLICY_LEGACY,
+ .apsd_conf = {0, 0},
+ },
+ [CONF_TX_AC_VO] = {
+ .queue_id = CONF_TX_AC_VO,
+ .channel_type = CONF_CHANNEL_TYPE_EDCF,
+ .tsid = CONF_TX_AC_VO,
+ .ps_scheme = CONF_PS_SCHEME_LEGACY,
+ .ack_policy = CONF_ACK_POLICY_LEGACY,
+ .apsd_conf = {0, 0},
+ },
+ },
+ .frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD,
+ .tx_compl_timeout = 700,
+ .tx_compl_threshold = 4,
+ .basic_rate = CONF_HW_BIT_RATE_1MBPS,
+ .basic_rate_5 = CONF_HW_BIT_RATE_6MBPS,
+ .tmpl_short_retry_limit = 10,
+ .tmpl_long_retry_limit = 10,
+ .tx_watchdog_timeout = 5000,
+ },
+ .conn = {
+ .wake_up_event = CONF_WAKE_UP_EVENT_DTIM,
+ .listen_interval = 1,
+ .suspend_wake_up_event = CONF_WAKE_UP_EVENT_N_DTIM,
+ .suspend_listen_interval = 3,
+ .bcn_filt_mode = CONF_BCN_FILT_MODE_ENABLED,
+ .bcn_filt_ie_count = 2,
+ .bcn_filt_ie = {
+ [0] = {
+ .ie = WLAN_EID_CHANNEL_SWITCH,
+ .rule = CONF_BCN_RULE_PASS_ON_APPEARANCE,
+ },
+ [1] = {
+ .ie = WLAN_EID_HT_OPERATION,
+ .rule = CONF_BCN_RULE_PASS_ON_CHANGE,
+ },
+ },
+ .synch_fail_thold = 10,
+ .bss_lose_timeout = 100,
+ .beacon_rx_timeout = 10000,
+ .broadcast_timeout = 20000,
+ .rx_broadcast_in_ps = 1,
+ .ps_poll_threshold = 10,
+ .bet_enable = CONF_BET_MODE_ENABLE,
+ .bet_max_consecutive = 50,
+ .psm_entry_retries = 8,
+ .psm_exit_retries = 16,
+ .psm_entry_nullfunc_retries = 3,
+ .dynamic_ps_timeout = 40,
+ .forced_ps = false,
+ .keep_alive_interval = 55000,
+ .max_listen_interval = 20,
+ },
+ .itrim = {
+ .enable = false,
+ .timeout = 50000,
+ },
+ .pm_config = {
+ .host_clk_settling_time = 5000,
+ .host_fast_wakeup_support = false
+ },
+ .roam_trigger = {
+ .trigger_pacing = 1,
+ .avg_weight_rssi_beacon = 20,
+ .avg_weight_rssi_data = 10,
+ .avg_weight_snr_beacon = 20,
+ .avg_weight_snr_data = 10,
+ },
+ .scan = {
+ .min_dwell_time_active = 7500,
+ .max_dwell_time_active = 30000,
+ .min_dwell_time_passive = 100000,
+ .max_dwell_time_passive = 100000,
+ .num_probe_reqs = 2,
+ .split_scan_timeout = 50000,
+ },
+ .sched_scan = {
+ /*
+ * Values are in TU/1000 but since sched scan FW command
+ * params are in TUs rounding up may occur.
+ */
+ .base_dwell_time = 7500,
+ .max_dwell_time_delta = 22500,
+ /* based on 250bits per probe @1Mbps */
+ .dwell_time_delta_per_probe = 2000,
+ /* based on 250bits per probe @6Mbps (plus a bit more) */
+ .dwell_time_delta_per_probe_5 = 350,
+ .dwell_time_passive = 100000,
+ .dwell_time_dfs = 150000,
+ .num_probe_reqs = 2,
+ .rssi_threshold = -90,
+ .snr_threshold = 0,
+ },
+ .ht = {
+ .rx_ba_win_size = 8,
+ .tx_ba_win_size = 64,
+ .inactivity_timeout = 10000,
+ .tx_ba_tid_bitmap = CONF_TX_BA_ENABLED_TID_BITMAP,
+ },
+ /*
+ * Memory config for wl127x chips is given in the
+ * wl12xx_default_priv_conf struct. The below configuration is
+ * for wl128x chips.
+ */
+ .mem = {
+ .num_stations = 1,
+ .ssid_profiles = 1,
+ .rx_block_num = 40,
+ .tx_min_block_num = 40,
+ .dynamic_memory = 1,
+ .min_req_tx_blocks = 45,
+ .min_req_rx_blocks = 22,
+ .tx_min = 27,
+ },
+ .fm_coex = {
+ .enable = true,
+ .swallow_period = 5,
+ .n_divider_fref_set_1 = 0xff, /* default */
+ .n_divider_fref_set_2 = 12,
+ .m_divider_fref_set_1 = 148,
+ .m_divider_fref_set_2 = 0xffff, /* default */
+ .coex_pll_stabilization_time = 0xffffffff, /* default */
+ .ldo_stabilization_time = 0xffff, /* default */
+ .fm_disturbed_band_margin = 0xff, /* default */
+ .swallow_clk_diff = 0xff, /* default */
+ },
+ .rx_streaming = {
+ .duration = 150,
+ .queues = 0x1,
+ .interval = 20,
+ .always = 0,
+ },
+ .fwlog = {
+ .mode = WL12XX_FWLOG_ON_DEMAND,
+ .mem_blocks = 2,
+ .severity = 0,
+ .timestamp = WL12XX_FWLOG_TIMESTAMP_DISABLED,
+ .output = WL12XX_FWLOG_OUTPUT_HOST,
+ .threshold = 0,
+ },
+ .rate = {
+ .rate_retry_score = 32000,
+ .per_add = 8192,
+ .per_th1 = 2048,
+ .per_th2 = 4096,
+ .max_per = 8100,
+ .inverse_curiosity_factor = 5,
+ .tx_fail_low_th = 4,
+ .tx_fail_high_th = 10,
+ .per_alpha_shift = 4,
+ .per_add_shift = 13,
+ .per_beta1_shift = 10,
+ .per_beta2_shift = 8,
+ .rate_check_up = 2,
+ .rate_check_down = 12,
+ .rate_retry_policy = {
+ 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00,
+ },
+ },
+ .hangover = {
+ .recover_time = 0,
+ .hangover_period = 20,
+ .dynamic_mode = 1,
+ .early_termination_mode = 1,
+ .max_period = 20,
+ .min_period = 1,
+ .increase_delta = 1,
+ .decrease_delta = 2,
+ .quiet_time = 4,
+ .increase_time = 1,
+ .window_size = 16,
+ },
+};
+
+static struct wl12xx_priv_conf wl12xx_default_priv_conf = {
+ .rf = {
+ .tx_per_channel_power_compensation_2 = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ },
+ .tx_per_channel_power_compensation_5 = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ },
+ },
+ .mem_wl127x = {
+ .num_stations = 1,
+ .ssid_profiles = 1,
+ .rx_block_num = 70,
+ .tx_min_block_num = 40,
+ .dynamic_memory = 1,
+ .min_req_tx_blocks = 100,
+ .min_req_rx_blocks = 22,
+ .tx_min = 27,
+ },
+
+};
+
+#define WL12XX_TX_HW_BLOCK_SPARE_DEFAULT 1
+#define WL12XX_TX_HW_BLOCK_GEM_SPARE 2
+#define WL12XX_TX_HW_BLOCK_SIZE 252
+
+static const u8 wl12xx_rate_to_idx_2ghz[] = {
+ /* MCS rates are used only with 11n */
+ 7, /* WL12XX_CONF_HW_RXTX_RATE_MCS7_SGI */
+ 7, /* WL12XX_CONF_HW_RXTX_RATE_MCS7 */
+ 6, /* WL12XX_CONF_HW_RXTX_RATE_MCS6 */
+ 5, /* WL12XX_CONF_HW_RXTX_RATE_MCS5 */
+ 4, /* WL12XX_CONF_HW_RXTX_RATE_MCS4 */
+ 3, /* WL12XX_CONF_HW_RXTX_RATE_MCS3 */
+ 2, /* WL12XX_CONF_HW_RXTX_RATE_MCS2 */
+ 1, /* WL12XX_CONF_HW_RXTX_RATE_MCS1 */
+ 0, /* WL12XX_CONF_HW_RXTX_RATE_MCS0 */
+
+ 11, /* WL12XX_CONF_HW_RXTX_RATE_54 */
+ 10, /* WL12XX_CONF_HW_RXTX_RATE_48 */
+ 9, /* WL12XX_CONF_HW_RXTX_RATE_36 */
+ 8, /* WL12XX_CONF_HW_RXTX_RATE_24 */
+
+ /* TI-specific rate */
+ CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL12XX_CONF_HW_RXTX_RATE_22 */
+
+ 7, /* WL12XX_CONF_HW_RXTX_RATE_18 */
+ 6, /* WL12XX_CONF_HW_RXTX_RATE_12 */
+ 3, /* WL12XX_CONF_HW_RXTX_RATE_11 */
+ 5, /* WL12XX_CONF_HW_RXTX_RATE_9 */
+ 4, /* WL12XX_CONF_HW_RXTX_RATE_6 */
+ 2, /* WL12XX_CONF_HW_RXTX_RATE_5_5 */
+ 1, /* WL12XX_CONF_HW_RXTX_RATE_2 */
+ 0 /* WL12XX_CONF_HW_RXTX_RATE_1 */
+};
+
+static const u8 wl12xx_rate_to_idx_5ghz[] = {
+ /* MCS rates are used only with 11n */
+ 7, /* WL12XX_CONF_HW_RXTX_RATE_MCS7_SGI */
+ 7, /* WL12XX_CONF_HW_RXTX_RATE_MCS7 */
+ 6, /* WL12XX_CONF_HW_RXTX_RATE_MCS6 */
+ 5, /* WL12XX_CONF_HW_RXTX_RATE_MCS5 */
+ 4, /* WL12XX_CONF_HW_RXTX_RATE_MCS4 */
+ 3, /* WL12XX_CONF_HW_RXTX_RATE_MCS3 */
+ 2, /* WL12XX_CONF_HW_RXTX_RATE_MCS2 */
+ 1, /* WL12XX_CONF_HW_RXTX_RATE_MCS1 */
+ 0, /* WL12XX_CONF_HW_RXTX_RATE_MCS0 */
+
+ 7, /* WL12XX_CONF_HW_RXTX_RATE_54 */
+ 6, /* WL12XX_CONF_HW_RXTX_RATE_48 */
+ 5, /* WL12XX_CONF_HW_RXTX_RATE_36 */
+ 4, /* WL12XX_CONF_HW_RXTX_RATE_24 */
+
+ /* TI-specific rate */
+ CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL12XX_CONF_HW_RXTX_RATE_22 */
+
+ 3, /* WL12XX_CONF_HW_RXTX_RATE_18 */
+ 2, /* WL12XX_CONF_HW_RXTX_RATE_12 */
+ CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL12XX_CONF_HW_RXTX_RATE_11 */
+ 1, /* WL12XX_CONF_HW_RXTX_RATE_9 */
+ 0, /* WL12XX_CONF_HW_RXTX_RATE_6 */
+ CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL12XX_CONF_HW_RXTX_RATE_5_5 */
+ CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL12XX_CONF_HW_RXTX_RATE_2 */
+ CONF_HW_RXTX_RATE_UNSUPPORTED /* WL12XX_CONF_HW_RXTX_RATE_1 */
+};
+
+static const u8 *wl12xx_band_rate_to_idx[] = {
+ [IEEE80211_BAND_2GHZ] = wl12xx_rate_to_idx_2ghz,
+ [IEEE80211_BAND_5GHZ] = wl12xx_rate_to_idx_5ghz
+};
+
+enum wl12xx_hw_rates {
+ WL12XX_CONF_HW_RXTX_RATE_MCS7_SGI = 0,
+ WL12XX_CONF_HW_RXTX_RATE_MCS7,
+ WL12XX_CONF_HW_RXTX_RATE_MCS6,
+ WL12XX_CONF_HW_RXTX_RATE_MCS5,
+ WL12XX_CONF_HW_RXTX_RATE_MCS4,
+ WL12XX_CONF_HW_RXTX_RATE_MCS3,
+ WL12XX_CONF_HW_RXTX_RATE_MCS2,
+ WL12XX_CONF_HW_RXTX_RATE_MCS1,
+ WL12XX_CONF_HW_RXTX_RATE_MCS0,
+ WL12XX_CONF_HW_RXTX_RATE_54,
+ WL12XX_CONF_HW_RXTX_RATE_48,
+ WL12XX_CONF_HW_RXTX_RATE_36,
+ WL12XX_CONF_HW_RXTX_RATE_24,
+ WL12XX_CONF_HW_RXTX_RATE_22,
+ WL12XX_CONF_HW_RXTX_RATE_18,
+ WL12XX_CONF_HW_RXTX_RATE_12,
+ WL12XX_CONF_HW_RXTX_RATE_11,
+ WL12XX_CONF_HW_RXTX_RATE_9,
+ WL12XX_CONF_HW_RXTX_RATE_6,
+ WL12XX_CONF_HW_RXTX_RATE_5_5,
+ WL12XX_CONF_HW_RXTX_RATE_2,
+ WL12XX_CONF_HW_RXTX_RATE_1,
+ WL12XX_CONF_HW_RXTX_RATE_MAX,
+};
+
+static struct wlcore_partition_set wl12xx_ptable[PART_TABLE_LEN] = {
+ [PART_DOWN] = {
+ .mem = {
+ .start = 0x00000000,
+ .size = 0x000177c0
+ },
+ .reg = {
+ .start = REGISTERS_BASE,
+ .size = 0x00008800
+ },
+ .mem2 = {
+ .start = 0x00000000,
+ .size = 0x00000000
+ },
+ .mem3 = {
+ .start = 0x00000000,
+ .size = 0x00000000
+ },
+ },
+
+ [PART_BOOT] = { /* in wl12xx we can use a mix of work and down
+ * partition here */
+ .mem = {
+ .start = 0x00040000,
+ .size = 0x00014fc0
+ },
+ .reg = {
+ .start = REGISTERS_BASE,
+ .size = 0x00008800
+ },
+ .mem2 = {
+ .start = 0x00000000,
+ .size = 0x00000000
+ },
+ .mem3 = {
+ .start = 0x00000000,
+ .size = 0x00000000
+ },
+ },
+
+ [PART_WORK] = {
+ .mem = {
+ .start = 0x00040000,
+ .size = 0x00014fc0
+ },
+ .reg = {
+ .start = REGISTERS_BASE,
+ .size = 0x0000a000
+ },
+ .mem2 = {
+ .start = 0x003004f8,
+ .size = 0x00000004
+ },
+ .mem3 = {
+ .start = 0x00040404,
+ .size = 0x00000000
+ },
+ },
+
+ [PART_DRPW] = {
+ .mem = {
+ .start = 0x00040000,
+ .size = 0x00014fc0
+ },
+ .reg = {
+ .start = DRPW_BASE,
+ .size = 0x00006000
+ },
+ .mem2 = {
+ .start = 0x00000000,
+ .size = 0x00000000
+ },
+ .mem3 = {
+ .start = 0x00000000,
+ .size = 0x00000000
+ }
+ }
+};
+
+static const int wl12xx_rtable[REG_TABLE_LEN] = {
+ [REG_ECPU_CONTROL] = WL12XX_REG_ECPU_CONTROL,
+ [REG_INTERRUPT_NO_CLEAR] = WL12XX_REG_INTERRUPT_NO_CLEAR,
+ [REG_INTERRUPT_ACK] = WL12XX_REG_INTERRUPT_ACK,
+ [REG_COMMAND_MAILBOX_PTR] = WL12XX_REG_COMMAND_MAILBOX_PTR,
+ [REG_EVENT_MAILBOX_PTR] = WL12XX_REG_EVENT_MAILBOX_PTR,
+ [REG_INTERRUPT_TRIG] = WL12XX_REG_INTERRUPT_TRIG,
+ [REG_INTERRUPT_MASK] = WL12XX_REG_INTERRUPT_MASK,
+ [REG_PC_ON_RECOVERY] = WL12XX_SCR_PAD4,
+ [REG_CHIP_ID_B] = WL12XX_CHIP_ID_B,
+ [REG_CMD_MBOX_ADDRESS] = WL12XX_CMD_MBOX_ADDRESS,
+
+ /* data access memory addresses, used with partition translation */
+ [REG_SLV_MEM_DATA] = WL1271_SLV_MEM_DATA,
+ [REG_SLV_REG_DATA] = WL1271_SLV_REG_DATA,
+
+ /* raw data access memory addresses */
+ [REG_RAW_FW_STATUS_ADDR] = FW_STATUS_ADDR,
+};
+
+/* TODO: maybe move to a new header file? */
+#define WL127X_FW_NAME_MULTI "ti-connectivity/wl127x-fw-4-mr.bin"
+#define WL127X_FW_NAME_SINGLE "ti-connectivity/wl127x-fw-4-sr.bin"
+#define WL127X_PLT_FW_NAME "ti-connectivity/wl127x-fw-4-plt.bin"
+
+#define WL128X_FW_NAME_MULTI "ti-connectivity/wl128x-fw-4-mr.bin"
+#define WL128X_FW_NAME_SINGLE "ti-connectivity/wl128x-fw-4-sr.bin"
+#define WL128X_PLT_FW_NAME "ti-connectivity/wl128x-fw-4-plt.bin"
+
+static void wl127x_prepare_read(struct wl1271 *wl, u32 rx_desc, u32 len)
+{
+ if (wl->chip.id != CHIP_ID_1283_PG20) {
+ struct wl1271_acx_mem_map *wl_mem_map = wl->target_mem_map;
+ struct wl1271_rx_mem_pool_addr rx_mem_addr;
+
+ /*
+ * Choose the block we want to read
+ * For aggregated packets, only the first memory block
+ * should be retrieved. The FW takes care of the rest.
+ */
+ u32 mem_block = rx_desc & RX_MEM_BLOCK_MASK;
+
+ rx_mem_addr.addr = (mem_block << 8) +
+ le32_to_cpu(wl_mem_map->packet_memory_pool_start);
+
+ rx_mem_addr.addr_extra = rx_mem_addr.addr + 4;
+
+ wl1271_write(wl, WL1271_SLV_REG_DATA,
+ &rx_mem_addr, sizeof(rx_mem_addr), false);
+ }
+}
+
+static int wl12xx_identify_chip(struct wl1271 *wl)
+{
+ int ret = 0;
+
+ switch (wl->chip.id) {
+ case CHIP_ID_1271_PG10:
+ wl1271_warning("chip id 0x%x (1271 PG10) support is obsolete",
+ wl->chip.id);
+
+ /* clear the alignment quirk, since we don't support it */
+ wl->quirks &= ~WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN;
+
+ wl->quirks |= WLCORE_QUIRK_LEGACY_NVS;
+ wl->sr_fw_name = WL127X_FW_NAME_SINGLE;
+ wl->mr_fw_name = WL127X_FW_NAME_MULTI;
+ memcpy(&wl->conf.mem, &wl12xx_default_priv_conf.mem_wl127x,
+ sizeof(wl->conf.mem));
+
+ /* read data preparation is only needed by wl127x */
+ wl->ops->prepare_read = wl127x_prepare_read;
+
+ break;
+
+ case CHIP_ID_1271_PG20:
+ wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)",
+ wl->chip.id);
+
+ /* clear the alignment quirk, since we don't support it */
+ wl->quirks &= ~WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN;
+
+ wl->quirks |= WLCORE_QUIRK_LEGACY_NVS;
+ wl->plt_fw_name = WL127X_PLT_FW_NAME;
+ wl->sr_fw_name = WL127X_FW_NAME_SINGLE;
+ wl->mr_fw_name = WL127X_FW_NAME_MULTI;
+ memcpy(&wl->conf.mem, &wl12xx_default_priv_conf.mem_wl127x,
+ sizeof(wl->conf.mem));
+
+ /* read data preparation is only needed by wl127x */
+ wl->ops->prepare_read = wl127x_prepare_read;
+
+ break;
+
+ case CHIP_ID_1283_PG20:
+ wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1283 PG20)",
+ wl->chip.id);
+ wl->plt_fw_name = WL128X_PLT_FW_NAME;
+ wl->sr_fw_name = WL128X_FW_NAME_SINGLE;
+ wl->mr_fw_name = WL128X_FW_NAME_MULTI;
+ break;
+ case CHIP_ID_1283_PG10:
+ default:
+ wl1271_warning("unsupported chip id: 0x%x", wl->chip.id);
+ ret = -ENODEV;
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+static void wl12xx_top_reg_write(struct wl1271 *wl, int addr, u16 val)
+{
+ /* write address >> 1 + 0x30000 to OCP_POR_CTR */
+ addr = (addr >> 1) + 0x30000;
+ wl1271_write32(wl, WL12XX_OCP_POR_CTR, addr);
+
+ /* write value to OCP_POR_WDATA */
+ wl1271_write32(wl, WL12XX_OCP_DATA_WRITE, val);
+
+ /* write 1 to OCP_CMD */
+ wl1271_write32(wl, WL12XX_OCP_CMD, OCP_CMD_WRITE);
+}
+
+static u16 wl12xx_top_reg_read(struct wl1271 *wl, int addr)
+{
+ u32 val;
+ int timeout = OCP_CMD_LOOP;
+
+ /* write address >> 1 + 0x30000 to OCP_POR_CTR */
+ addr = (addr >> 1) + 0x30000;
+ wl1271_write32(wl, WL12XX_OCP_POR_CTR, addr);
+
+ /* write 2 to OCP_CMD */
+ wl1271_write32(wl, WL12XX_OCP_CMD, OCP_CMD_READ);
+
+ /* poll for data ready */
+ do {
+ val = wl1271_read32(wl, WL12XX_OCP_DATA_READ);
+ } while (!(val & OCP_READY_MASK) && --timeout);
+
+ if (!timeout) {
+ wl1271_warning("Top register access timed out.");
+ return 0xffff;
+ }
+
+ /* check data status and return if OK */
+ if ((val & OCP_STATUS_MASK) == OCP_STATUS_OK)
+ return val & 0xffff;
+ else {
+ wl1271_warning("Top register access returned error.");
+ return 0xffff;
+ }
+}
+
+static int wl128x_switch_tcxo_to_fref(struct wl1271 *wl)
+{
+ u16 spare_reg;
+
+ /* Mask bits [2] & [8:4] in the sys_clk_cfg register */
+ spare_reg = wl12xx_top_reg_read(wl, WL_SPARE_REG);
+ if (spare_reg == 0xFFFF)
+ return -EFAULT;
+ spare_reg |= (BIT(3) | BIT(5) | BIT(6));
+ wl12xx_top_reg_write(wl, WL_SPARE_REG, spare_reg);
+
+ /* Enable FREF_CLK_REQ & mux MCS and coex PLLs to FREF */
+ wl12xx_top_reg_write(wl, SYS_CLK_CFG_REG,
+ WL_CLK_REQ_TYPE_PG2 | MCS_PLL_CLK_SEL_FREF);
+
+ /* Delay execution for 15msec, to let the HW settle */
+ mdelay(15);
+
+ return 0;
+}
+
+static bool wl128x_is_tcxo_valid(struct wl1271 *wl)
+{
+ u16 tcxo_detection;
+
+ tcxo_detection = wl12xx_top_reg_read(wl, TCXO_CLK_DETECT_REG);
+ if (tcxo_detection & TCXO_DET_FAILED)
+ return false;
+
+ return true;
+}
+
+static bool wl128x_is_fref_valid(struct wl1271 *wl)
+{
+ u16 fref_detection;
+
+ fref_detection = wl12xx_top_reg_read(wl, FREF_CLK_DETECT_REG);
+ if (fref_detection & FREF_CLK_DETECT_FAIL)
+ return false;
+
+ return true;
+}
+
+static int wl128x_manually_configure_mcs_pll(struct wl1271 *wl)
+{
+ wl12xx_top_reg_write(wl, MCS_PLL_M_REG, MCS_PLL_M_REG_VAL);
+ wl12xx_top_reg_write(wl, MCS_PLL_N_REG, MCS_PLL_N_REG_VAL);
+ wl12xx_top_reg_write(wl, MCS_PLL_CONFIG_REG, MCS_PLL_CONFIG_REG_VAL);
+
+ return 0;
+}
+
+static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk)
+{
+ u16 spare_reg;
+ u16 pll_config;
+ u8 input_freq;
+
+ /* Mask bits [3:1] in the sys_clk_cfg register */
+ spare_reg = wl12xx_top_reg_read(wl, WL_SPARE_REG);
+ if (spare_reg == 0xFFFF)
+ return -EFAULT;
+ spare_reg |= BIT(2);
+ wl12xx_top_reg_write(wl, WL_SPARE_REG, spare_reg);
+
+ /* Handle special cases of the TCXO clock */
+ if (wl->tcxo_clock == WL12XX_TCXOCLOCK_16_8 ||
+ wl->tcxo_clock == WL12XX_TCXOCLOCK_33_6)
+ return wl128x_manually_configure_mcs_pll(wl);
+
+ /* Set the input frequency according to the selected clock source */
+ input_freq = (clk & 1) + 1;
+
+ pll_config = wl12xx_top_reg_read(wl, MCS_PLL_CONFIG_REG);
+ if (pll_config == 0xFFFF)
+ return -EFAULT;
+ pll_config |= (input_freq << MCS_SEL_IN_FREQ_SHIFT);
+ pll_config |= MCS_PLL_ENABLE_HP;
+ wl12xx_top_reg_write(wl, MCS_PLL_CONFIG_REG, pll_config);
+
+ return 0;
+}
+
+/*
+ * WL128x has two clocks input - TCXO and FREF.
+ * TCXO is the main clock of the device, while FREF is used to sync
+ * between the GPS and the cellular modem.
+ * In cases where TCXO is 32.736MHz or 16.368MHz, the FREF will be used
+ * as the WLAN/BT main clock.
+ */
+static int wl128x_boot_clk(struct wl1271 *wl, int *selected_clock)
+{
+ u16 sys_clk_cfg;
+
+ /* For XTAL-only modes, FREF will be used after switching from TCXO */
+ if (wl->ref_clock == WL12XX_REFCLOCK_26_XTAL ||
+ wl->ref_clock == WL12XX_REFCLOCK_38_XTAL) {
+ if (!wl128x_switch_tcxo_to_fref(wl))
+ return -EINVAL;
+ goto fref_clk;
+ }
+
+ /* Query the HW, to determine which clock source we should use */
+ sys_clk_cfg = wl12xx_top_reg_read(wl, SYS_CLK_CFG_REG);
+ if (sys_clk_cfg == 0xFFFF)
+ return -EINVAL;
+ if (sys_clk_cfg & PRCM_CM_EN_MUX_WLAN_FREF)
+ goto fref_clk;
+
+ /* If TCXO is either 32.736MHz or 16.368MHz, switch to FREF */
+ if (wl->tcxo_clock == WL12XX_TCXOCLOCK_16_368 ||
+ wl->tcxo_clock == WL12XX_TCXOCLOCK_32_736) {
+ if (!wl128x_switch_tcxo_to_fref(wl))
+ return -EINVAL;
+ goto fref_clk;
+ }
+
+ /* TCXO clock is selected */
+ if (!wl128x_is_tcxo_valid(wl))
+ return -EINVAL;
+ *selected_clock = wl->tcxo_clock;
+ goto config_mcs_pll;
+
+fref_clk:
+ /* FREF clock is selected */
+ if (!wl128x_is_fref_valid(wl))
+ return -EINVAL;
+ *selected_clock = wl->ref_clock;
+
+config_mcs_pll:
+ return wl128x_configure_mcs_pll(wl, *selected_clock);
+}
+
+static int wl127x_boot_clk(struct wl1271 *wl)
+{
+ u32 pause;
+ u32 clk;
+
+ if (WL127X_PG_GET_MAJOR(wl->hw_pg_ver) < 3)
+ wl->quirks |= WLCORE_QUIRK_END_OF_TRANSACTION;
+
+ if (wl->ref_clock == CONF_REF_CLK_19_2_E ||
+ wl->ref_clock == CONF_REF_CLK_38_4_E ||
+ wl->ref_clock == CONF_REF_CLK_38_4_M_XTAL)
+ /* ref clk: 19.2/38.4/38.4-XTAL */
+ clk = 0x3;
+ else if (wl->ref_clock == CONF_REF_CLK_26_E ||
+ wl->ref_clock == CONF_REF_CLK_52_E)
+ /* ref clk: 26/52 */
+ clk = 0x5;
+ else
+ return -EINVAL;
+
+ if (wl->ref_clock != CONF_REF_CLK_19_2_E) {
+ u16 val;
+ /* Set clock type (open drain) */
+ val = wl12xx_top_reg_read(wl, OCP_REG_CLK_TYPE);
+ val &= FREF_CLK_TYPE_BITS;
+ wl12xx_top_reg_write(wl, OCP_REG_CLK_TYPE, val);
+
+ /* Set clock pull mode (no pull) */
+ val = wl12xx_top_reg_read(wl, OCP_REG_CLK_PULL);
+ val |= NO_PULL;
+ wl12xx_top_reg_write(wl, OCP_REG_CLK_PULL, val);
+ } else {
+ u16 val;
+ /* Set clock polarity */
+ val = wl12xx_top_reg_read(wl, OCP_REG_CLK_POLARITY);
+ val &= FREF_CLK_POLARITY_BITS;
+ val |= CLK_REQ_OUTN_SEL;
+ wl12xx_top_reg_write(wl, OCP_REG_CLK_POLARITY, val);
+ }
+
+ wl1271_write32(wl, WL12XX_PLL_PARAMETERS, clk);
+
+ pause = wl1271_read32(wl, WL12XX_PLL_PARAMETERS);
+
+ wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause);
+
+ pause &= ~(WU_COUNTER_PAUSE_VAL);
+ pause |= WU_COUNTER_PAUSE_VAL;
+ wl1271_write32(wl, WL12XX_WU_COUNTER_PAUSE, pause);
+
+ return 0;
+}
+
+static int wl1271_boot_soft_reset(struct wl1271 *wl)
+{
+ unsigned long timeout;
+ u32 boot_data;
+
+ /* perform soft reset */
+ wl1271_write32(wl, WL12XX_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
+
+ /* SOFT_RESET is self clearing */
+ timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
+ while (1) {
+ boot_data = wl1271_read32(wl, WL12XX_SLV_SOFT_RESET);
+ wl1271_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
+ if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
+ break;
+
+ if (time_after(jiffies, timeout)) {
+ /* 1.2 check pWhalBus->uSelfClearTime if the
+ * timeout was reached */
+ wl1271_error("soft reset timeout");
+ return -1;
+ }
+
+ udelay(SOFT_RESET_STALL_TIME);
+ }
+
+ /* disable Rx/Tx */
+ wl1271_write32(wl, WL12XX_ENABLE, 0x0);
+
+ /* disable auto calibration on start*/
+ wl1271_write32(wl, WL12XX_SPARE_A2, 0xffff);
+
+ return 0;
+}
+
+static int wl12xx_pre_boot(struct wl1271 *wl)
+{
+ int ret = 0;
+ u32 clk;
+ int selected_clock = -1;
+
+ if (wl->chip.id == CHIP_ID_1283_PG20) {
+ ret = wl128x_boot_clk(wl, &selected_clock);
+ if (ret < 0)
+ goto out;
+ } else {
+ ret = wl127x_boot_clk(wl);
+ if (ret < 0)
+ goto out;
+ }
+
+ /* Continue the ELP wake up sequence */
+ wl1271_write32(wl, WL12XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
+ udelay(500);
+
+ wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
+
+ /* Read-modify-write DRPW_SCRATCH_START register (see next state)
+ to be used by DRPw FW. The RTRIM value will be added by the FW
+ before taking DRPw out of reset */
+
+ clk = wl1271_read32(wl, WL12XX_DRPW_SCRATCH_START);
+
+ wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk);
+
+ if (wl->chip.id == CHIP_ID_1283_PG20)
+ clk |= ((selected_clock & 0x3) << 1) << 4;
+ else
+ clk |= (wl->ref_clock << 1) << 4;
+
+ wl1271_write32(wl, WL12XX_DRPW_SCRATCH_START, clk);
+
+ wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
+
+ /* Disable interrupts */
+ wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
+
+ ret = wl1271_boot_soft_reset(wl);
+ if (ret < 0)
+ goto out;
+
+out:
+ return ret;
+}
+
+static void wl12xx_pre_upload(struct wl1271 *wl)
+{
+ u32 tmp;
+
+ /* write firmware's last address (ie. it's length) to
+ * ACX_EEPROMLESS_IND_REG */
+ wl1271_debug(DEBUG_BOOT, "ACX_EEPROMLESS_IND_REG");
+
+ wl1271_write32(wl, WL12XX_EEPROMLESS_IND, WL12XX_EEPROMLESS_IND);
+
+ tmp = wlcore_read_reg(wl, REG_CHIP_ID_B);
+
+ wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp);
+
+ /* 6. read the EEPROM parameters */
+ tmp = wl1271_read32(wl, WL12XX_SCR_PAD2);
+
+ /* WL1271: The reference driver skips steps 7 to 10 (jumps directly
+ * to upload_fw) */
+
+ if (wl->chip.id == CHIP_ID_1283_PG20)
+ wl12xx_top_reg_write(wl, SDIO_IO_DS, HCI_IO_DS_6MA);
+}
+
+static void wl12xx_enable_interrupts(struct wl1271 *wl)
+{
+ u32 polarity;
+
+ polarity = wl12xx_top_reg_read(wl, OCP_REG_POLARITY);
+
+ /* We use HIGH polarity, so unset the LOW bit */
+ polarity &= ~POLARITY_LOW;
+ wl12xx_top_reg_write(wl, OCP_REG_POLARITY, polarity);
+
+ wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_ALL_EVENTS_VECTOR);
+
+ wlcore_enable_interrupts(wl);
+ wlcore_write_reg(wl, REG_INTERRUPT_MASK,
+ WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK));
+
+ wl1271_write32(wl, WL12XX_HI_CFG, HI_CFG_DEF_VAL);
+}
+
+static int wl12xx_boot(struct wl1271 *wl)
+{
+ int ret;
+
+ ret = wl12xx_pre_boot(wl);
+ if (ret < 0)
+ goto out;
+
+ ret = wlcore_boot_upload_nvs(wl);
+ if (ret < 0)
+ goto out;
+
+ wl12xx_pre_upload(wl);
+
+ ret = wlcore_boot_upload_firmware(wl);
+ if (ret < 0)
+ goto out;
+
+ ret = wlcore_boot_run_firmware(wl);
+ if (ret < 0)
+ goto out;
+
+ wl12xx_enable_interrupts(wl);
+
+out:
+ return ret;
+}
+
+static void wl12xx_trigger_cmd(struct wl1271 *wl, int cmd_box_addr,
+ void *buf, size_t len)
+{
+ wl1271_write(wl, cmd_box_addr, buf, len, false);
+ wlcore_write_reg(wl, REG_INTERRUPT_TRIG, WL12XX_INTR_TRIG_CMD);
+}
+
+static void wl12xx_ack_event(struct wl1271 *wl)
+{
+ wlcore_write_reg(wl, REG_INTERRUPT_TRIG, WL12XX_INTR_TRIG_EVENT_ACK);
+}
+
+static u32 wl12xx_calc_tx_blocks(struct wl1271 *wl, u32 len, u32 spare_blks)
+{
+ u32 blk_size = WL12XX_TX_HW_BLOCK_SIZE;
+ u32 align_len = wlcore_calc_packet_alignment(wl, len);
+
+ return (align_len + blk_size - 1) / blk_size + spare_blks;
+}
+
+static void
+wl12xx_set_tx_desc_blocks(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc,
+ u32 blks, u32 spare_blks)
+{
+ if (wl->chip.id == CHIP_ID_1283_PG20) {
+ desc->wl128x_mem.total_mem_blocks = blks;
+ } else {
+ desc->wl127x_mem.extra_blocks = spare_blks;
+ desc->wl127x_mem.total_mem_blocks = blks;
+ }
+}
+
+static void
+wl12xx_set_tx_desc_data_len(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc,
+ struct sk_buff *skb)
+{
+ u32 aligned_len = wlcore_calc_packet_alignment(wl, skb->len);
+
+ if (wl->chip.id == CHIP_ID_1283_PG20) {
+ desc->wl128x_mem.extra_bytes = aligned_len - skb->len;
+ desc->length = cpu_to_le16(aligned_len >> 2);
+
+ wl1271_debug(DEBUG_TX,
+ "tx_fill_hdr: hlid: %d len: %d life: %d mem: %d extra: %d",
+ desc->hlid,
+ le16_to_cpu(desc->length),
+ le16_to_cpu(desc->life_time),
+ desc->wl128x_mem.total_mem_blocks,
+ desc->wl128x_mem.extra_bytes);
+ } else {
+ /* calculate number of padding bytes */
+ int pad = aligned_len - skb->len;
+ desc->tx_attr |=
+ cpu_to_le16(pad << TX_HW_ATTR_OFST_LAST_WORD_PAD);
+
+ /* Store the aligned length in terms of words */
+ desc->length = cpu_to_le16(aligned_len >> 2);
+
+ wl1271_debug(DEBUG_TX,
+ "tx_fill_hdr: pad: %d hlid: %d len: %d life: %d mem: %d",
+ pad, desc->hlid,
+ le16_to_cpu(desc->length),
+ le16_to_cpu(desc->life_time),
+ desc->wl127x_mem.total_mem_blocks);
+ }
+}
+
+static enum wl_rx_buf_align
+wl12xx_get_rx_buf_align(struct wl1271 *wl, u32 rx_desc)
+{
+ if (rx_desc & RX_BUF_UNALIGNED_PAYLOAD)
+ return WLCORE_RX_BUF_UNALIGNED;
+
+ return WLCORE_RX_BUF_ALIGNED;
+}
+
+static u32 wl12xx_get_rx_packet_len(struct wl1271 *wl, void *rx_data,
+ u32 data_len)
+{
+ struct wl1271_rx_descriptor *desc = rx_data;
+
+ /* invalid packet */
+ if (data_len < sizeof(*desc) ||
+ data_len < sizeof(*desc) + desc->pad_len)
+ return 0;
+
+ return data_len - sizeof(*desc) - desc->pad_len;
+}
+
+static void wl12xx_tx_delayed_compl(struct wl1271 *wl)
+{
+ if (wl->fw_status->tx_results_counter == (wl->tx_results_count & 0xff))
+ return;
+
+ wl1271_tx_complete(wl);
+}
+
+static int wl12xx_hw_init(struct wl1271 *wl)
+{
+ int ret;
+
+ if (wl->chip.id == CHIP_ID_1283_PG20) {
+ u32 host_cfg_bitmap = HOST_IF_CFG_RX_FIFO_ENABLE;
+
+ ret = wl128x_cmd_general_parms(wl);
+ if (ret < 0)
+ goto out;
+ ret = wl128x_cmd_radio_parms(wl);
+ if (ret < 0)
+ goto out;
+
+ if (wl->quirks & WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN)
+ /* Enable SDIO padding */
+ host_cfg_bitmap |= HOST_IF_CFG_TX_PAD_TO_SDIO_BLK;
+
+ /* Must be before wl1271_acx_init_mem_config() */
+ ret = wl1271_acx_host_if_cfg_bitmap(wl, host_cfg_bitmap);
+ if (ret < 0)
+ goto out;
+ } else {
+ ret = wl1271_cmd_general_parms(wl);
+ if (ret < 0)
+ goto out;
+ ret = wl1271_cmd_radio_parms(wl);
+ if (ret < 0)
+ goto out;
+ ret = wl1271_cmd_ext_radio_parms(wl);
+ if (ret < 0)
+ goto out;
+ }
+out:
+ return ret;
+}
+
+static u32 wl12xx_sta_get_ap_rate_mask(struct wl1271 *wl,
+ struct wl12xx_vif *wlvif)
+{
+ return wlvif->rate_set;
+}
+
+static int wl12xx_identify_fw(struct wl1271 *wl)
+{
+ unsigned int *fw_ver = wl->chip.fw_ver;
+
+ /* Only new station firmwares support routing fw logs to the host */
+ if ((fw_ver[FW_VER_IF_TYPE] == FW_VER_IF_TYPE_STA) &&
+ (fw_ver[FW_VER_MINOR] < FW_VER_MINOR_FWLOG_STA_MIN))
+ wl->quirks |= WLCORE_QUIRK_FWLOG_NOT_IMPLEMENTED;
+
+ /* This feature is not yet supported for AP mode */
+ if (fw_ver[FW_VER_IF_TYPE] == FW_VER_IF_TYPE_AP)
+ wl->quirks |= WLCORE_QUIRK_FWLOG_NOT_IMPLEMENTED;
+
+ return 0;
+}
+
+static void wl12xx_conf_init(struct wl1271 *wl)
+{
+ struct wl12xx_priv *priv = wl->priv;
+
+ /* apply driver default configuration */
+ memcpy(&wl->conf, &wl12xx_conf, sizeof(wl12xx_conf));
+
+ /* apply default private configuration */
+ memcpy(&priv->conf, &wl12xx_default_priv_conf, sizeof(priv->conf));
+}
+
+static bool wl12xx_mac_in_fuse(struct wl1271 *wl)
+{
+ bool supported = false;
+ u8 major, minor;
+
+ if (wl->chip.id == CHIP_ID_1283_PG20) {
+ major = WL128X_PG_GET_MAJOR(wl->hw_pg_ver);
+ minor = WL128X_PG_GET_MINOR(wl->hw_pg_ver);
+
+ /* in wl128x we have the MAC address if the PG is >= (2, 1) */
+ if (major > 2 || (major == 2 && minor >= 1))
+ supported = true;
+ } else {
+ major = WL127X_PG_GET_MAJOR(wl->hw_pg_ver);
+ minor = WL127X_PG_GET_MINOR(wl->hw_pg_ver);
+
+ /* in wl127x we have the MAC address if the PG is >= (3, 1) */
+ if (major == 3 && minor >= 1)
+ supported = true;
+ }
+
+ wl1271_debug(DEBUG_PROBE,
+ "PG Ver major = %d minor = %d, MAC %s present",
+ major, minor, supported ? "is" : "is not");
+
+ return supported;
+}
+
+static void wl12xx_get_fuse_mac(struct wl1271 *wl)
+{
+ u32 mac1, mac2;
+
+ wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
+
+ mac1 = wl1271_read32(wl, WL12XX_REG_FUSE_BD_ADDR_1);
+ mac2 = wl1271_read32(wl, WL12XX_REG_FUSE_BD_ADDR_2);
+
+ /* these are the two parts of the BD_ADDR */
+ wl->fuse_oui_addr = ((mac2 & 0xffff) << 8) +
+ ((mac1 & 0xff000000) >> 24);
+ wl->fuse_nic_addr = mac1 & 0xffffff;
+
+ wlcore_set_partition(wl, &wl->ptable[PART_DOWN]);
+}
+
+static s8 wl12xx_get_pg_ver(struct wl1271 *wl)
+{
+ u32 die_info;
+
+ if (wl->chip.id == CHIP_ID_1283_PG20)
+ die_info = wl12xx_top_reg_read(wl, WL128X_REG_FUSE_DATA_2_1);
+ else
+ die_info = wl12xx_top_reg_read(wl, WL127X_REG_FUSE_DATA_2_1);
+
+ return (s8) (die_info & PG_VER_MASK) >> PG_VER_OFFSET;
+}
+
+static void wl12xx_get_mac(struct wl1271 *wl)
+{
+ if (wl12xx_mac_in_fuse(wl))
+ wl12xx_get_fuse_mac(wl);
+}
+
+static struct wlcore_ops wl12xx_ops = {
+ .identify_chip = wl12xx_identify_chip,
+ .identify_fw = wl12xx_identify_fw,
+ .boot = wl12xx_boot,
+ .trigger_cmd = wl12xx_trigger_cmd,
+ .ack_event = wl12xx_ack_event,
+ .calc_tx_blocks = wl12xx_calc_tx_blocks,
+ .set_tx_desc_blocks = wl12xx_set_tx_desc_blocks,
+ .set_tx_desc_data_len = wl12xx_set_tx_desc_data_len,
+ .get_rx_buf_align = wl12xx_get_rx_buf_align,
+ .get_rx_packet_len = wl12xx_get_rx_packet_len,
+ .tx_immediate_compl = NULL,
+ .tx_delayed_compl = wl12xx_tx_delayed_compl,
+ .hw_init = wl12xx_hw_init,
+ .init_vif = NULL,
+ .sta_get_ap_rate_mask = wl12xx_sta_get_ap_rate_mask,
+ .get_pg_ver = wl12xx_get_pg_ver,
+ .get_mac = wl12xx_get_mac,
+};
+
+static struct ieee80211_sta_ht_cap wl12xx_ht_cap = {
+ .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 |
+ (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT),
+ .ht_supported = true,
+ .ampdu_factor = IEEE80211_HT_MAX_AMPDU_8K,
+ .ampdu_density = IEEE80211_HT_MPDU_DENSITY_8,
+ .mcs = {
+ .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
+ .rx_highest = cpu_to_le16(72),
+ .tx_params = IEEE80211_HT_MCS_TX_DEFINED,
+ },
+};
+
+static int __devinit wl12xx_probe(struct platform_device *pdev)
+{
+ struct wl1271 *wl;
+ struct ieee80211_hw *hw;
+ struct wl12xx_priv *priv;
+
+ hw = wlcore_alloc_hw(sizeof(*priv));
+ if (IS_ERR(hw)) {
+ wl1271_error("can't allocate hw");
+ return PTR_ERR(hw);
+ }
+
+ wl = hw->priv;
+ wl->ops = &wl12xx_ops;
+ wl->ptable = wl12xx_ptable;
+ wl->rtable = wl12xx_rtable;
+ wl->num_tx_desc = 16;
+ wl->normal_tx_spare = WL12XX_TX_HW_BLOCK_SPARE_DEFAULT;
+ wl->gem_tx_spare = WL12XX_TX_HW_BLOCK_GEM_SPARE;
+ wl->band_rate_to_idx = wl12xx_band_rate_to_idx;
+ wl->hw_tx_rate_tbl_size = WL12XX_CONF_HW_RXTX_RATE_MAX;
+ wl->hw_min_ht_rate = WL12XX_CONF_HW_RXTX_RATE_MCS0;
+ wl->fw_status_priv_len = 0;
+ memcpy(&wl->ht_cap, &wl12xx_ht_cap, sizeof(wl12xx_ht_cap));
+ wl12xx_conf_init(wl);
+
+ return wlcore_probe(wl, pdev);
+}
+
+static const struct platform_device_id wl12xx_id_table[] __devinitconst = {
+ { "wl12xx", 0 },
+ { } /* Terminating Entry */
+};
+MODULE_DEVICE_TABLE(platform, wl12xx_id_table);
+
+static struct platform_driver wl12xx_driver = {
+ .probe = wl12xx_probe,
+ .remove = __devexit_p(wlcore_remove),
+ .id_table = wl12xx_id_table,
+ .driver = {
+ .name = "wl12xx_driver",
+ .owner = THIS_MODULE,
+ }
+};
+
+static int __init wl12xx_init(void)
+{
+ return platform_driver_register(&wl12xx_driver);
+}
+module_init(wl12xx_init);
+
+static void __exit wl12xx_exit(void)
+{
+ platform_driver_unregister(&wl12xx_driver);
+}
+module_exit(wl12xx_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
+MODULE_FIRMWARE(WL127X_FW_NAME_SINGLE);
+MODULE_FIRMWARE(WL127X_FW_NAME_MULTI);
+MODULE_FIRMWARE(WL127X_PLT_FW_NAME);
+MODULE_FIRMWARE(WL128X_FW_NAME_SINGLE);
+MODULE_FIRMWARE(WL128X_FW_NAME_MULTI);
+MODULE_FIRMWARE(WL128X_PLT_FW_NAME);
diff --git a/drivers/net/wireless/wl12xx/reg.h b/drivers/net/wireless/ti/wl12xx/reg.h
similarity index 71%
rename from drivers/net/wireless/wl12xx/reg.h
rename to drivers/net/wireless/ti/wl12xx/reg.h
index 340db32..79ede02 100644
--- a/drivers/net/wireless/wl12xx/reg.h
+++ b/drivers/net/wireless/ti/wl12xx/reg.h
@@ -33,16 +33,8 @@
#define REGISTERS_DOWN_SIZE 0x00008800
#define REGISTERS_WORK_SIZE 0x0000b000
-#define HW_ACCESS_ELP_CTRL_REG_ADDR 0x1FFFC
#define FW_STATUS_ADDR (0x14FC0 + 0xA000)
-/* ELP register commands */
-#define ELPCTRL_WAKE_UP 0x1
-#define ELPCTRL_WAKE_UP_WLAN_READY 0x5
-#define ELPCTRL_SLEEP 0x0
-/* ELP WLAN_READY bit */
-#define ELPCTRL_WLAN_READY 0x2
-
/*===============================================
Host Software Reset - 32bit RW
------------------------------------------
@@ -57,14 +49,14 @@
(not self-clearing), the Wlan hardware
exits the software reset state.
===============================================*/
-#define ACX_REG_SLV_SOFT_RESET (REGISTERS_BASE + 0x0000)
+#define WL12XX_SLV_SOFT_RESET (REGISTERS_BASE + 0x0000)
#define WL1271_SLV_REG_DATA (REGISTERS_BASE + 0x0008)
#define WL1271_SLV_REG_ADATA (REGISTERS_BASE + 0x000c)
#define WL1271_SLV_MEM_DATA (REGISTERS_BASE + 0x0018)
-#define ACX_REG_INTERRUPT_TRIG (REGISTERS_BASE + 0x0474)
-#define ACX_REG_INTERRUPT_TRIG_H (REGISTERS_BASE + 0x0478)
+#define WL12XX_REG_INTERRUPT_TRIG (REGISTERS_BASE + 0x0474)
+#define WL12XX_REG_INTERRUPT_TRIG_H (REGISTERS_BASE + 0x0478)
/*=============================================
Host Interrupt Mask Register - 32bit (RW)
@@ -94,7 +86,7 @@
21- -
Default: 0x0001
*==============================================*/
-#define ACX_REG_INTERRUPT_MASK (REGISTERS_BASE + 0x04DC)
+#define WL12XX_REG_INTERRUPT_MASK (REGISTERS_BASE + 0x04DC)
/*=============================================
Host Interrupt Mask Set 16bit, (Write only)
@@ -125,7 +117,7 @@
Reading this register doesn't
effect its content.
=============================================*/
-#define ACX_REG_INTERRUPT_NO_CLEAR (REGISTERS_BASE + 0x04E8)
+#define WL12XX_REG_INTERRUPT_NO_CLEAR (REGISTERS_BASE + 0x04E8)
/*=============================================
Host Interrupt Status Clear on Read Register
@@ -148,9 +140,9 @@
HINT_STS_ND registers, thus making the
assotiated interrupt inactive. (0-no effect)
==============================================*/
-#define ACX_REG_INTERRUPT_ACK (REGISTERS_BASE + 0x04F0)
+#define WL12XX_REG_INTERRUPT_ACK (REGISTERS_BASE + 0x04F0)
-#define RX_DRIVER_COUNTER_ADDRESS (REGISTERS_BASE + 0x0538)
+#define WL12XX_REG_RX_DRIVER_COUNTER (REGISTERS_BASE + 0x0538)
/* Device Configuration registers*/
#define SOR_CFG (REGISTERS_BASE + 0x0800)
@@ -175,9 +167,9 @@
1 halt eCPU
0 enable eCPU
===============================================*/
-#define ACX_REG_ECPU_CONTROL (REGISTERS_BASE + 0x0804)
+#define WL12XX_REG_ECPU_CONTROL (REGISTERS_BASE + 0x0804)
-#define HI_CFG (REGISTERS_BASE + 0x0808)
+#define WL12XX_HI_CFG (REGISTERS_BASE + 0x0808)
/*===============================================
EEPROM Burst Read Start - 32bit RW
@@ -196,72 +188,67 @@
*================================================*/
#define ACX_REG_EE_START (REGISTERS_BASE + 0x080C)
-#define OCP_POR_CTR (REGISTERS_BASE + 0x09B4)
-#define OCP_DATA_WRITE (REGISTERS_BASE + 0x09B8)
-#define OCP_DATA_READ (REGISTERS_BASE + 0x09BC)
-#define OCP_CMD (REGISTERS_BASE + 0x09C0)
+#define WL12XX_OCP_POR_CTR (REGISTERS_BASE + 0x09B4)
+#define WL12XX_OCP_DATA_WRITE (REGISTERS_BASE + 0x09B8)
+#define WL12XX_OCP_DATA_READ (REGISTERS_BASE + 0x09BC)
+#define WL12XX_OCP_CMD (REGISTERS_BASE + 0x09C0)
-#define WL1271_HOST_WR_ACCESS (REGISTERS_BASE + 0x09F8)
+#define WL12XX_HOST_WR_ACCESS (REGISTERS_BASE + 0x09F8)
-#define CHIP_ID_B (REGISTERS_BASE + 0x5674)
+#define WL12XX_CHIP_ID_B (REGISTERS_BASE + 0x5674)
-#define CHIP_ID_1271_PG10 (0x4030101)
-#define CHIP_ID_1271_PG20 (0x4030111)
-#define CHIP_ID_1283_PG10 (0x05030101)
-#define CHIP_ID_1283_PG20 (0x05030111)
-
-#define ENABLE (REGISTERS_BASE + 0x5450)
+#define WL12XX_ENABLE (REGISTERS_BASE + 0x5450)
/* Power Management registers */
-#define ELP_CFG_MODE (REGISTERS_BASE + 0x5804)
-#define ELP_CMD (REGISTERS_BASE + 0x5808)
-#define PLL_CAL_TIME (REGISTERS_BASE + 0x5810)
-#define CLK_REQ_TIME (REGISTERS_BASE + 0x5814)
-#define CLK_BUF_TIME (REGISTERS_BASE + 0x5818)
+#define WL12XX_ELP_CFG_MODE (REGISTERS_BASE + 0x5804)
+#define WL12XX_ELP_CMD (REGISTERS_BASE + 0x5808)
+#define WL12XX_PLL_CAL_TIME (REGISTERS_BASE + 0x5810)
+#define WL12XX_CLK_REQ_TIME (REGISTERS_BASE + 0x5814)
+#define WL12XX_CLK_BUF_TIME (REGISTERS_BASE + 0x5818)
-#define CFG_PLL_SYNC_CNT (REGISTERS_BASE + 0x5820)
+#define WL12XX_CFG_PLL_SYNC_CNT (REGISTERS_BASE + 0x5820)
/* Scratch Pad registers*/
-#define SCR_PAD0 (REGISTERS_BASE + 0x5608)
-#define SCR_PAD1 (REGISTERS_BASE + 0x560C)
-#define SCR_PAD2 (REGISTERS_BASE + 0x5610)
-#define SCR_PAD3 (REGISTERS_BASE + 0x5614)
-#define SCR_PAD4 (REGISTERS_BASE + 0x5618)
-#define SCR_PAD4_SET (REGISTERS_BASE + 0x561C)
-#define SCR_PAD4_CLR (REGISTERS_BASE + 0x5620)
-#define SCR_PAD5 (REGISTERS_BASE + 0x5624)
-#define SCR_PAD5_SET (REGISTERS_BASE + 0x5628)
-#define SCR_PAD5_CLR (REGISTERS_BASE + 0x562C)
-#define SCR_PAD6 (REGISTERS_BASE + 0x5630)
-#define SCR_PAD7 (REGISTERS_BASE + 0x5634)
-#define SCR_PAD8 (REGISTERS_BASE + 0x5638)
-#define SCR_PAD9 (REGISTERS_BASE + 0x563C)
+#define WL12XX_SCR_PAD0 (REGISTERS_BASE + 0x5608)
+#define WL12XX_SCR_PAD1 (REGISTERS_BASE + 0x560C)
+#define WL12XX_SCR_PAD2 (REGISTERS_BASE + 0x5610)
+#define WL12XX_SCR_PAD3 (REGISTERS_BASE + 0x5614)
+#define WL12XX_SCR_PAD4 (REGISTERS_BASE + 0x5618)
+#define WL12XX_SCR_PAD4_SET (REGISTERS_BASE + 0x561C)
+#define WL12XX_SCR_PAD4_CLR (REGISTERS_BASE + 0x5620)
+#define WL12XX_SCR_PAD5 (REGISTERS_BASE + 0x5624)
+#define WL12XX_SCR_PAD5_SET (REGISTERS_BASE + 0x5628)
+#define WL12XX_SCR_PAD5_CLR (REGISTERS_BASE + 0x562C)
+#define WL12XX_SCR_PAD6 (REGISTERS_BASE + 0x5630)
+#define WL12XX_SCR_PAD7 (REGISTERS_BASE + 0x5634)
+#define WL12XX_SCR_PAD8 (REGISTERS_BASE + 0x5638)
+#define WL12XX_SCR_PAD9 (REGISTERS_BASE + 0x563C)
/* Spare registers*/
-#define SPARE_A1 (REGISTERS_BASE + 0x0994)
-#define SPARE_A2 (REGISTERS_BASE + 0x0998)
-#define SPARE_A3 (REGISTERS_BASE + 0x099C)
-#define SPARE_A4 (REGISTERS_BASE + 0x09A0)
-#define SPARE_A5 (REGISTERS_BASE + 0x09A4)
-#define SPARE_A6 (REGISTERS_BASE + 0x09A8)
-#define SPARE_A7 (REGISTERS_BASE + 0x09AC)
-#define SPARE_A8 (REGISTERS_BASE + 0x09B0)
-#define SPARE_B1 (REGISTERS_BASE + 0x5420)
-#define SPARE_B2 (REGISTERS_BASE + 0x5424)
-#define SPARE_B3 (REGISTERS_BASE + 0x5428)
-#define SPARE_B4 (REGISTERS_BASE + 0x542C)
-#define SPARE_B5 (REGISTERS_BASE + 0x5430)
-#define SPARE_B6 (REGISTERS_BASE + 0x5434)
-#define SPARE_B7 (REGISTERS_BASE + 0x5438)
-#define SPARE_B8 (REGISTERS_BASE + 0x543C)
+#define WL12XX_SPARE_A1 (REGISTERS_BASE + 0x0994)
+#define WL12XX_SPARE_A2 (REGISTERS_BASE + 0x0998)
+#define WL12XX_SPARE_A3 (REGISTERS_BASE + 0x099C)
+#define WL12XX_SPARE_A4 (REGISTERS_BASE + 0x09A0)
+#define WL12XX_SPARE_A5 (REGISTERS_BASE + 0x09A4)
+#define WL12XX_SPARE_A6 (REGISTERS_BASE + 0x09A8)
+#define WL12XX_SPARE_A7 (REGISTERS_BASE + 0x09AC)
+#define WL12XX_SPARE_A8 (REGISTERS_BASE + 0x09B0)
+#define WL12XX_SPARE_B1 (REGISTERS_BASE + 0x5420)
+#define WL12XX_SPARE_B2 (REGISTERS_BASE + 0x5424)
+#define WL12XX_SPARE_B3 (REGISTERS_BASE + 0x5428)
+#define WL12XX_SPARE_B4 (REGISTERS_BASE + 0x542C)
+#define WL12XX_SPARE_B5 (REGISTERS_BASE + 0x5430)
+#define WL12XX_SPARE_B6 (REGISTERS_BASE + 0x5434)
+#define WL12XX_SPARE_B7 (REGISTERS_BASE + 0x5438)
+#define WL12XX_SPARE_B8 (REGISTERS_BASE + 0x543C)
-#define PLL_PARAMETERS (REGISTERS_BASE + 0x6040)
-#define WU_COUNTER_PAUSE (REGISTERS_BASE + 0x6008)
-#define WELP_ARM_COMMAND (REGISTERS_BASE + 0x6100)
-#define DRPW_SCRATCH_START (DRPW_BASE + 0x002C)
+#define WL12XX_PLL_PARAMETERS (REGISTERS_BASE + 0x6040)
+#define WL12XX_WU_COUNTER_PAUSE (REGISTERS_BASE + 0x6008)
+#define WL12XX_WELP_ARM_COMMAND (REGISTERS_BASE + 0x6100)
+#define WL12XX_DRPW_SCRATCH_START (DRPW_BASE + 0x002C)
+#define WL12XX_CMD_MBOX_ADDRESS 0x407B4
-#define ACX_SLV_SOFT_RESET_BIT BIT(1)
#define ACX_REG_EEPROM_START_BIT BIT(1)
/* Command/Information Mailbox Pointers */
@@ -279,7 +266,7 @@
the host receives the Init Complete interrupt from
the Wlan hardware.
===============================================*/
-#define REG_COMMAND_MAILBOX_PTR (SCR_PAD0)
+#define WL12XX_REG_COMMAND_MAILBOX_PTR (WL12XX_SCR_PAD0)
/*===============================================
Information Mailbox Pointer - 32bit RW
@@ -294,7 +281,7 @@
until after the host receives the Init Complete interrupt from
the Wlan hardware.
===============================================*/
-#define REG_EVENT_MAILBOX_PTR (SCR_PAD1)
+#define WL12XX_REG_EVENT_MAILBOX_PTR (WL12XX_SCR_PAD1)
/*===============================================
EEPROM Read/Write Request 32bit RW
@@ -365,26 +352,6 @@
#define ACX_CONT_WIND_MIN_MASK 0x0000007f
#define ACX_CONT_WIND_MAX 0x03ff0000
-/*===============================================
- HI_CFG Interface Configuration Register Values
- ------------------------------------------
- ===============================================*/
-#define HI_CFG_UART_ENABLE 0x00000004
-#define HI_CFG_RST232_ENABLE 0x00000008
-#define HI_CFG_CLOCK_REQ_SELECT 0x00000010
-#define HI_CFG_HOST_INT_ENABLE 0x00000020
-#define HI_CFG_VLYNQ_OUTPUT_ENABLE 0x00000040
-#define HI_CFG_HOST_INT_ACTIVE_LOW 0x00000080
-#define HI_CFG_UART_TX_OUT_GPIO_15 0x00000100
-#define HI_CFG_UART_TX_OUT_GPIO_14 0x00000200
-#define HI_CFG_UART_TX_OUT_GPIO_7 0x00000400
-
-#define HI_CFG_DEF_VAL \
- (HI_CFG_UART_ENABLE | \
- HI_CFG_RST232_ENABLE | \
- HI_CFG_CLOCK_REQ_SELECT | \
- HI_CFG_HOST_INT_ENABLE)
-
#define REF_FREQ_19_2 0
#define REF_FREQ_26_0 1
#define REF_FREQ_38_4 2
@@ -400,38 +367,19 @@
#define LUT_PARAM_BB_PLL_LOOP_FILTER 5
#define LUT_PARAM_NUM 6
-#define ACX_EEPROMLESS_IND_REG (SCR_PAD4)
+#define WL12XX_EEPROMLESS_IND (WL12XX_SCR_PAD4)
#define USE_EEPROM 0
-#define SOFT_RESET_MAX_TIME 1000000
-#define SOFT_RESET_STALL_TIME 1000
#define NVS_DATA_BUNDARY_ALIGNMENT 4
-
-/* Firmware image load chunk size */
-#define CHUNK_SIZE 16384
-
/* Firmware image header size */
#define FW_HDR_SIZE 8
-#define ECPU_CONTROL_HALT 0x00000101
-
-
/******************************************************************************
CHANNELS, BAND & REG DOMAINS definitions
******************************************************************************/
-
-enum {
- RADIO_BAND_2_4GHZ = 0, /* 2.4 Ghz band */
- RADIO_BAND_5GHZ = 1, /* 5 Ghz band */
- RADIO_BAND_JAPAN_4_9_GHZ = 2,
- DEFAULT_BAND = RADIO_BAND_2_4GHZ,
- INVALID_BAND = 0xFE,
- MAX_RADIO_BANDS = 0xFF
-};
-
#define SHORT_PREAMBLE_BIT BIT(0) /* CCK or Barker depending on the rate */
#define OFDM_RATE_BIT BIT(6)
#define PBCC_RATE_BIT BIT(7)
@@ -465,14 +413,82 @@
******************************************************************************/
+#define OCP_CMD_LOOP 32
+#define OCP_CMD_WRITE 0x1
+#define OCP_CMD_READ 0x2
+#define OCP_READY_MASK BIT(18)
+#define OCP_STATUS_MASK (BIT(16) | BIT(17))
+#define OCP_STATUS_NO_RESP 0x00000
+#define OCP_STATUS_OK 0x10000
+#define OCP_STATUS_REQ_FAILED 0x20000
+#define OCP_STATUS_RESP_ERROR 0x30000
-/*************************************************************************
+#define OCP_REG_POLARITY 0x0064
+#define OCP_REG_CLK_TYPE 0x0448
+#define OCP_REG_CLK_POLARITY 0x0cb2
+#define OCP_REG_CLK_PULL 0x0cb4
- Interrupt Trigger Register (Host -> WiLink)
+#define POLARITY_LOW BIT(1)
+#define NO_PULL (BIT(14) | BIT(15))
-**************************************************************************/
+#define FREF_CLK_TYPE_BITS 0xfffffe7f
+#define CLK_REQ_PRCM 0x100
+#define FREF_CLK_POLARITY_BITS 0xfffff8ff
+#define CLK_REQ_OUTN_SEL 0x700
-/* Hardware to Embedded CPU Interrupts - first 32-bit register set */
+#define WU_COUNTER_PAUSE_VAL 0x3FF
+
+/* PLL configuration algorithm for wl128x */
+#define SYS_CLK_CFG_REG 0x2200
+/* Bit[0] - 0-TCXO, 1-FREF */
+#define MCS_PLL_CLK_SEL_FREF BIT(0)
+/* Bit[3:2] - 01-TCXO, 10-FREF */
+#define WL_CLK_REQ_TYPE_FREF BIT(3)
+#define WL_CLK_REQ_TYPE_PG2 (BIT(3) | BIT(2))
+/* Bit[4] - 0-TCXO, 1-FREF */
+#define PRCM_CM_EN_MUX_WLAN_FREF BIT(4)
+
+#define TCXO_ILOAD_INT_REG 0x2264
+#define TCXO_CLK_DETECT_REG 0x2266
+
+#define TCXO_DET_FAILED BIT(4)
+
+#define FREF_ILOAD_INT_REG 0x2084
+#define FREF_CLK_DETECT_REG 0x2086
+#define FREF_CLK_DETECT_FAIL BIT(4)
+
+/* Use this reg for masking during driver access */
+#define WL_SPARE_REG 0x2320
+#define WL_SPARE_VAL BIT(2)
+/* Bit[6:5:3] - mask wl write SYS_CLK_CFG[8:5:2:4] */
+#define WL_SPARE_MASK_8526 (BIT(6) | BIT(5) | BIT(3))
+
+#define PLL_LOCK_COUNTERS_REG 0xD8C
+#define PLL_LOCK_COUNTERS_COEX 0x0F
+#define PLL_LOCK_COUNTERS_MCS 0xF0
+#define MCS_PLL_OVERRIDE_REG 0xD90
+#define MCS_PLL_CONFIG_REG 0xD92
+#define MCS_SEL_IN_FREQ_MASK 0x0070
+#define MCS_SEL_IN_FREQ_SHIFT 4
+#define MCS_PLL_CONFIG_REG_VAL 0x73
+#define MCS_PLL_ENABLE_HP (BIT(0) | BIT(1))
+
+#define MCS_PLL_M_REG 0xD94
+#define MCS_PLL_N_REG 0xD96
+#define MCS_PLL_M_REG_VAL 0xC8
+#define MCS_PLL_N_REG_VAL 0x07
+
+#define SDIO_IO_DS 0xd14
+
+/* SDIO/wSPI DS configuration values */
+enum {
+ HCI_IO_DS_8MA = 0,
+ HCI_IO_DS_4MA = 1, /* default */
+ HCI_IO_DS_6MA = 2,
+ HCI_IO_DS_2MA = 3,
+};
+
+/* end PLL configuration algorithm for wl128x */
/*
* Host Command Interrupt. Setting this bit masks
@@ -480,7 +496,7 @@
* the FW that it has sent a command
* to the Wlan hardware Command Mailbox.
*/
-#define INTR_TRIG_CMD BIT(0)
+#define WL12XX_INTR_TRIG_CMD BIT(0)
/*
* Host Event Acknowlegde Interrupt. The host
@@ -488,42 +504,27 @@
* the unsolicited information from the event
* mailbox.
*/
-#define INTR_TRIG_EVENT_ACK BIT(1)
+#define WL12XX_INTR_TRIG_EVENT_ACK BIT(1)
-/*
- * The host sets this bit to inform the Wlan
- * FW that a TX packet is in the XFER
- * Buffer #0.
- */
-#define INTR_TRIG_TX_PROC0 BIT(2)
+/*===============================================
+ HI_CFG Interface Configuration Register Values
+ ------------------------------------------
+ ===============================================*/
+#define HI_CFG_UART_ENABLE 0x00000004
+#define HI_CFG_RST232_ENABLE 0x00000008
+#define HI_CFG_CLOCK_REQ_SELECT 0x00000010
+#define HI_CFG_HOST_INT_ENABLE 0x00000020
+#define HI_CFG_VLYNQ_OUTPUT_ENABLE 0x00000040
+#define HI_CFG_HOST_INT_ACTIVE_LOW 0x00000080
+#define HI_CFG_UART_TX_OUT_GPIO_15 0x00000100
+#define HI_CFG_UART_TX_OUT_GPIO_14 0x00000200
+#define HI_CFG_UART_TX_OUT_GPIO_7 0x00000400
-/*
- * The host sets this bit to inform the FW
- * that it read a packet from RX XFER
- * Buffer #0.
- */
-#define INTR_TRIG_RX_PROC0 BIT(3)
-
-#define INTR_TRIG_DEBUG_ACK BIT(4)
-
-#define INTR_TRIG_STATE_CHANGED BIT(5)
-
-
-/* Hardware to Embedded CPU Interrupts - second 32-bit register set */
-
-/*
- * The host sets this bit to inform the FW
- * that it read a packet from RX XFER
- * Buffer #1.
- */
-#define INTR_TRIG_RX_PROC1 BIT(17)
-
-/*
- * The host sets this bit to inform the Wlan
- * hardware that a TX packet is in the XFER
- * Buffer #1.
- */
-#define INTR_TRIG_TX_PROC1 BIT(18)
+#define HI_CFG_DEF_VAL \
+ (HI_CFG_UART_ENABLE | \
+ HI_CFG_RST232_ENABLE | \
+ HI_CFG_CLOCK_REQ_SELECT | \
+ HI_CFG_HOST_INT_ENABLE)
#define WL127X_REG_FUSE_DATA_2_1 0x050a
#define WL128X_REG_FUSE_DATA_2_1 0x2152
diff --git a/drivers/net/wireless/wl12xx/debugfs.h b/drivers/net/wireless/ti/wl12xx/wl12xx.h
similarity index 64%
copy from drivers/net/wireless/wl12xx/debugfs.h
copy to drivers/net/wireless/ti/wl12xx/wl12xx.h
index 254c5b2..74cd332 100644
--- a/drivers/net/wireless/wl12xx/debugfs.h
+++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h
@@ -1,9 +1,7 @@
/*
- * This file is part of wl1271
+ * This file is part of wl12xx
*
- * Copyright (C) 2009 Nokia Corporation
- *
- * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ * Copyright (C) 2011 Texas Instruments Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -21,13 +19,13 @@
*
*/
-#ifndef __DEBUGFS_H__
-#define __DEBUGFS_H__
+#ifndef __WL12XX_PRIV_H__
+#define __WL12XX_PRIV_H__
-#include "wl12xx.h"
+#include "conf.h"
-int wl1271_debugfs_init(struct wl1271 *wl);
-void wl1271_debugfs_exit(struct wl1271 *wl);
-void wl1271_debugfs_reset(struct wl1271 *wl);
+struct wl12xx_priv {
+ struct wl12xx_priv_conf conf;
+};
-#endif /* WL1271_DEBUGFS_H */
+#endif /* __WL12XX_PRIV_H__ */
diff --git a/drivers/net/wireless/ti/wlcore/Kconfig b/drivers/net/wireless/ti/wlcore/Kconfig
new file mode 100644
index 0000000..9d04c38
--- /dev/null
+++ b/drivers/net/wireless/ti/wlcore/Kconfig
@@ -0,0 +1,41 @@
+config WLCORE
+ tristate "TI wlcore support"
+ depends on WL_TI && GENERIC_HARDIRQS
+ depends on INET
+ select FW_LOADER
+ ---help---
+ This module contains the main code for TI WLAN chips. It abstracts
+ hardware-specific differences among different chipset families.
+ Each chipset family needs to implement its own lower-level module
+ that will depend on this module for the common code.
+
+ If you choose to build a module, it will be called wlcore. Say N if
+ unsure.
+
+config WLCORE_SPI
+ tristate "TI wlcore SPI support"
+ depends on WLCORE && SPI_MASTER
+ select CRC7
+ ---help---
+ This module adds support for the SPI interface of adapters using
+ TI WLAN chipsets. Select this if your platform is using
+ the SPI bus.
+
+ If you choose to build a module, it'll be called wlcore_spi.
+ Say N if unsure.
+
+config WLCORE_SDIO
+ tristate "TI wlcore SDIO support"
+ depends on WLCORE && MMC
+ ---help---
+ This module adds support for the SDIO interface of adapters using
+ TI WLAN chipsets. Select this if your platform is using
+ the SDIO bus.
+
+ If you choose to build a module, it'll be called wlcore_sdio.
+ Say N if unsure.
+
+config WL12XX_PLATFORM_DATA
+ bool
+ depends on WLCORE_SDIO != n || WL1251_SDIO != n
+ default y
diff --git a/drivers/net/wireless/ti/wlcore/Makefile b/drivers/net/wireless/ti/wlcore/Makefile
new file mode 100644
index 0000000..d9fba9e
--- /dev/null
+++ b/drivers/net/wireless/ti/wlcore/Makefile
@@ -0,0 +1,15 @@
+wlcore-objs = main.o cmd.o io.o event.o tx.o rx.o ps.o acx.o \
+ boot.o init.o debugfs.o scan.o
+
+wlcore_spi-objs = spi.o
+wlcore_sdio-objs = sdio.o
+
+wlcore-$(CONFIG_NL80211_TESTMODE) += testmode.o
+obj-$(CONFIG_WLCORE) += wlcore.o
+obj-$(CONFIG_WLCORE_SPI) += wlcore_spi.o
+obj-$(CONFIG_WLCORE_SDIO) += wlcore_sdio.o
+
+# small builtin driver bit
+obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wl12xx_platform_data.o
+
+ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/ti/wlcore/acx.c
similarity index 97%
rename from drivers/net/wireless/wl12xx/acx.c
rename to drivers/net/wireless/ti/wlcore/acx.c
index bc96db0..5912541 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/ti/wlcore/acx.c
@@ -28,11 +28,11 @@
#include <linux/spi/spi.h>
#include <linux/slab.h>
-#include "wl12xx.h"
+#include "wlcore.h"
#include "debug.h"
#include "wl12xx_80211.h"
-#include "reg.h"
#include "ps.h"
+#include "hw_ops.h"
int wl1271_acx_wake_up_conditions(struct wl1271 *wl, struct wl12xx_vif *wlvif,
u8 wake_up_event, u8 listen_interval)
@@ -757,7 +757,10 @@
/* configure one AP supported rate class */
acx->rate_policy_idx = cpu_to_le32(wlvif->sta.ap_rate_idx);
- acx->rate_policy.enabled_rates = cpu_to_le32(wlvif->rate_set);
+
+ /* the AP policy is HW specific */
+ acx->rate_policy.enabled_rates =
+ cpu_to_le32(wlcore_hw_sta_get_ap_rate_mask(wl, wlvif));
acx->rate_policy.short_retry_limit = c->short_retry_limit;
acx->rate_policy.long_retry_limit = c->long_retry_limit;
acx->rate_policy.aflags = c->aflags;
@@ -969,17 +972,14 @@
goto out;
}
- if (wl->chip.id == CHIP_ID_1283_PG20)
- mem = &wl->conf.mem_wl128x;
- else
- mem = &wl->conf.mem_wl127x;
+ mem = &wl->conf.mem;
/* memory config */
mem_conf->num_stations = mem->num_stations;
mem_conf->rx_mem_block_num = mem->rx_block_num;
mem_conf->tx_min_mem_block_num = mem->tx_min_block_num;
mem_conf->num_ssid_profiles = mem->ssid_profiles;
- mem_conf->total_tx_descriptors = cpu_to_le32(ACX_TX_DESCRIPTORS);
+ mem_conf->total_tx_descriptors = cpu_to_le32(wl->num_tx_desc);
mem_conf->dyn_mem_enable = mem->dynamic_memory;
mem_conf->tx_free_req = mem->min_req_tx_blocks;
mem_conf->rx_free_req = mem->min_req_rx_blocks;
@@ -998,32 +998,6 @@
return ret;
}
-int wl1271_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap)
-{
- struct wl1271_acx_host_config_bitmap *bitmap_conf;
- int ret;
-
- bitmap_conf = kzalloc(sizeof(*bitmap_conf), GFP_KERNEL);
- if (!bitmap_conf) {
- ret = -ENOMEM;
- goto out;
- }
-
- bitmap_conf->host_cfg_bitmap = cpu_to_le32(host_cfg_bitmap);
-
- ret = wl1271_cmd_configure(wl, ACX_HOST_IF_CFG_BITMAP,
- bitmap_conf, sizeof(*bitmap_conf));
- if (ret < 0) {
- wl1271_warning("wl1271 bitmap config opt failed: %d", ret);
- goto out;
- }
-
-out:
- kfree(bitmap_conf);
-
- return ret;
-}
-
int wl1271_acx_init_mem_config(struct wl1271 *wl)
{
int ret;
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/ti/wlcore/acx.h
similarity index 99%
rename from drivers/net/wireless/wl12xx/acx.h
rename to drivers/net/wireless/ti/wlcore/acx.h
index a28fc04..b2f8883 100644
--- a/drivers/net/wireless/wl12xx/acx.h
+++ b/drivers/net/wireless/ti/wlcore/acx.h
@@ -25,7 +25,7 @@
#ifndef __ACX_H__
#define __ACX_H__
-#include "wl12xx.h"
+#include "wlcore.h"
#include "cmd.h"
/*************************************************************************
@@ -824,16 +824,11 @@
__le32 period;
} __packed;
+/* TODO: maybe this needs to be moved somewhere else? */
#define HOST_IF_CFG_RX_FIFO_ENABLE BIT(0)
#define HOST_IF_CFG_TX_EXTRA_BLKS_SWAP BIT(1)
#define HOST_IF_CFG_TX_PAD_TO_SDIO_BLK BIT(3)
-struct wl1271_acx_host_config_bitmap {
- struct acx_header header;
-
- __le32 host_cfg_bitmap;
-} __packed;
-
enum {
WL1271_ACX_TRIG_TYPE_LEVEL = 0,
WL1271_ACX_TRIG_TYPE_EDGE,
@@ -1274,7 +1269,6 @@
int wl1271_acx_tx_config_options(struct wl1271 *wl);
int wl12xx_acx_mem_cfg(struct wl1271 *wl);
int wl1271_acx_init_mem_config(struct wl1271 *wl);
-int wl1271_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap);
int wl1271_acx_init_rx_interrupt(struct wl1271 *wl);
int wl1271_acx_smart_reflex(struct wl1271 *wl);
int wl1271_acx_bet_enable(struct wl1271 *wl, struct wl12xx_vif *wlvif,
diff --git a/drivers/net/wireless/ti/wlcore/boot.c b/drivers/net/wireless/ti/wlcore/boot.c
new file mode 100644
index 0000000..3a2207d
--- /dev/null
+++ b/drivers/net/wireless/ti/wlcore/boot.c
@@ -0,0 +1,443 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/wl12xx.h>
+#include <linux/export.h>
+
+#include "debug.h"
+#include "acx.h"
+#include "boot.h"
+#include "io.h"
+#include "event.h"
+#include "rx.h"
+#include "hw_ops.h"
+
+static void wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag)
+{
+ u32 cpu_ctrl;
+
+ /* 10.5.0 run the firmware (I) */
+ cpu_ctrl = wlcore_read_reg(wl, REG_ECPU_CONTROL);
+
+ /* 10.5.1 run the firmware (II) */
+ cpu_ctrl |= flag;
+ wlcore_write_reg(wl, REG_ECPU_CONTROL, cpu_ctrl);
+}
+
+static int wlcore_parse_fw_ver(struct wl1271 *wl)
+{
+ int ret;
+
+ ret = sscanf(wl->chip.fw_ver_str + 4, "%u.%u.%u.%u.%u",
+ &wl->chip.fw_ver[0], &wl->chip.fw_ver[1],
+ &wl->chip.fw_ver[2], &wl->chip.fw_ver[3],
+ &wl->chip.fw_ver[4]);
+
+ if (ret != 5) {
+ wl1271_warning("fw version incorrect value");
+ memset(wl->chip.fw_ver, 0, sizeof(wl->chip.fw_ver));
+ return -EINVAL;
+ }
+
+ ret = wlcore_identify_fw(wl);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int wlcore_boot_fw_version(struct wl1271 *wl)
+{
+ struct wl1271_static_data *static_data;
+ int ret;
+
+ static_data = kmalloc(sizeof(*static_data), GFP_DMA);
+ if (!static_data) {
+ wl1271_error("Couldn't allocate memory for static data!");
+ return -ENOMEM;
+ }
+
+ wl1271_read(wl, wl->cmd_box_addr, static_data, sizeof(*static_data),
+ false);
+
+ strncpy(wl->chip.fw_ver_str, static_data->fw_version,
+ sizeof(wl->chip.fw_ver_str));
+
+ kfree(static_data);
+
+ /* make sure the string is NULL-terminated */
+ wl->chip.fw_ver_str[sizeof(wl->chip.fw_ver_str) - 1] = '\0';
+
+ ret = wlcore_parse_fw_ver(wl);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
+ size_t fw_data_len, u32 dest)
+{
+ struct wlcore_partition_set partition;
+ int addr, chunk_num, partition_limit;
+ u8 *p, *chunk;
+
+ /* whal_FwCtrl_LoadFwImageSm() */
+
+ wl1271_debug(DEBUG_BOOT, "starting firmware upload");
+
+ wl1271_debug(DEBUG_BOOT, "fw_data_len %zd chunk_size %d",
+ fw_data_len, CHUNK_SIZE);
+
+ if ((fw_data_len % 4) != 0) {
+ wl1271_error("firmware length not multiple of four");
+ return -EIO;
+ }
+
+ chunk = kmalloc(CHUNK_SIZE, GFP_KERNEL);
+ if (!chunk) {
+ wl1271_error("allocation for firmware upload chunk failed");
+ return -ENOMEM;
+ }
+
+ memcpy(&partition, &wl->ptable[PART_DOWN], sizeof(partition));
+ partition.mem.start = dest;
+ wlcore_set_partition(wl, &partition);
+
+ /* 10.1 set partition limit and chunk num */
+ chunk_num = 0;
+ partition_limit = wl->ptable[PART_DOWN].mem.size;
+
+ while (chunk_num < fw_data_len / CHUNK_SIZE) {
+ /* 10.2 update partition, if needed */
+ addr = dest + (chunk_num + 2) * CHUNK_SIZE;
+ if (addr > partition_limit) {
+ addr = dest + chunk_num * CHUNK_SIZE;
+ partition_limit = chunk_num * CHUNK_SIZE +
+ wl->ptable[PART_DOWN].mem.size;
+ partition.mem.start = addr;
+ wlcore_set_partition(wl, &partition);
+ }
+
+ /* 10.3 upload the chunk */
+ addr = dest + chunk_num * CHUNK_SIZE;
+ p = buf + chunk_num * CHUNK_SIZE;
+ memcpy(chunk, p, CHUNK_SIZE);
+ wl1271_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
+ p, addr);
+ wl1271_write(wl, addr, chunk, CHUNK_SIZE, false);
+
+ chunk_num++;
+ }
+
+ /* 10.4 upload the last chunk */
+ addr = dest + chunk_num * CHUNK_SIZE;
+ p = buf + chunk_num * CHUNK_SIZE;
+ memcpy(chunk, p, fw_data_len % CHUNK_SIZE);
+ wl1271_debug(DEBUG_BOOT, "uploading fw last chunk (%zd B) 0x%p to 0x%x",
+ fw_data_len % CHUNK_SIZE, p, addr);
+ wl1271_write(wl, addr, chunk, fw_data_len % CHUNK_SIZE, false);
+
+ kfree(chunk);
+ return 0;
+}
+
+int wlcore_boot_upload_firmware(struct wl1271 *wl)
+{
+ u32 chunks, addr, len;
+ int ret = 0;
+ u8 *fw;
+
+ fw = wl->fw;
+ chunks = be32_to_cpup((__be32 *) fw);
+ fw += sizeof(u32);
+
+ wl1271_debug(DEBUG_BOOT, "firmware chunks to be uploaded: %u", chunks);
+
+ while (chunks--) {
+ addr = be32_to_cpup((__be32 *) fw);
+ fw += sizeof(u32);
+ len = be32_to_cpup((__be32 *) fw);
+ fw += sizeof(u32);
+
+ if (len > 300000) {
+ wl1271_info("firmware chunk too long: %u", len);
+ return -EINVAL;
+ }
+ wl1271_debug(DEBUG_BOOT, "chunk %d addr 0x%x len %u",
+ chunks, addr, len);
+ ret = wl1271_boot_upload_firmware_chunk(wl, fw, len, addr);
+ if (ret != 0)
+ break;
+ fw += len;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wlcore_boot_upload_firmware);
+
+int wlcore_boot_upload_nvs(struct wl1271 *wl)
+{
+ size_t nvs_len, burst_len;
+ int i;
+ u32 dest_addr, val;
+ u8 *nvs_ptr, *nvs_aligned;
+
+ if (wl->nvs == NULL)
+ return -ENODEV;
+
+ if (wl->quirks & WLCORE_QUIRK_LEGACY_NVS) {
+ struct wl1271_nvs_file *nvs =
+ (struct wl1271_nvs_file *)wl->nvs;
+ /*
+ * FIXME: the LEGACY NVS image support (NVS's missing the 5GHz
+ * band configurations) can be removed when those NVS files stop
+ * floating around.
+ */
+ if (wl->nvs_len == sizeof(struct wl1271_nvs_file) ||
+ wl->nvs_len == WL1271_INI_LEGACY_NVS_FILE_SIZE) {
+ if (nvs->general_params.dual_mode_select)
+ wl->enable_11a = true;
+ }
+
+ if (wl->nvs_len != sizeof(struct wl1271_nvs_file) &&
+ (wl->nvs_len != WL1271_INI_LEGACY_NVS_FILE_SIZE ||
+ wl->enable_11a)) {
+ wl1271_error("nvs size is not as expected: %zu != %zu",
+ wl->nvs_len, sizeof(struct wl1271_nvs_file));
+ kfree(wl->nvs);
+ wl->nvs = NULL;
+ wl->nvs_len = 0;
+ return -EILSEQ;
+ }
+
+ /* only the first part of the NVS needs to be uploaded */
+ nvs_len = sizeof(nvs->nvs);
+ nvs_ptr = (u8 *) nvs->nvs;
+ } else {
+ struct wl128x_nvs_file *nvs = (struct wl128x_nvs_file *)wl->nvs;
+
+ if (wl->nvs_len == sizeof(struct wl128x_nvs_file)) {
+ if (nvs->general_params.dual_mode_select)
+ wl->enable_11a = true;
+ } else {
+ wl1271_error("nvs size is not as expected: %zu != %zu",
+ wl->nvs_len,
+ sizeof(struct wl128x_nvs_file));
+ kfree(wl->nvs);
+ wl->nvs = NULL;
+ wl->nvs_len = 0;
+ return -EILSEQ;
+ }
+
+ /* only the first part of the NVS needs to be uploaded */
+ nvs_len = sizeof(nvs->nvs);
+ nvs_ptr = (u8 *)nvs->nvs;
+ }
+
+ /* update current MAC address to NVS */
+ nvs_ptr[11] = wl->addresses[0].addr[0];
+ nvs_ptr[10] = wl->addresses[0].addr[1];
+ nvs_ptr[6] = wl->addresses[0].addr[2];
+ nvs_ptr[5] = wl->addresses[0].addr[3];
+ nvs_ptr[4] = wl->addresses[0].addr[4];
+ nvs_ptr[3] = wl->addresses[0].addr[5];
+
+ /*
+ * Layout before the actual NVS tables:
+ * 1 byte : burst length.
+ * 2 bytes: destination address.
+ * n bytes: data to burst copy.
+ *
+ * This is ended by a 0 length, then the NVS tables.
+ */
+
+ /* FIXME: Do we need to check here whether the LSB is 1? */
+ while (nvs_ptr[0]) {
+ burst_len = nvs_ptr[0];
+ dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8));
+
+ /*
+ * Due to our new wl1271_translate_reg_addr function,
+ * we need to add the register partition start address
+ * to the destination
+ */
+ dest_addr += wl->curr_part.reg.start;
+
+ /* We move our pointer to the data */
+ nvs_ptr += 3;
+
+ for (i = 0; i < burst_len; i++) {
+ if (nvs_ptr + 3 >= (u8 *) wl->nvs + nvs_len)
+ goto out_badnvs;
+
+ val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
+ | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
+
+ wl1271_debug(DEBUG_BOOT,
+ "nvs burst write 0x%x: 0x%x",
+ dest_addr, val);
+ wl1271_write32(wl, dest_addr, val);
+
+ nvs_ptr += 4;
+ dest_addr += 4;
+ }
+
+ if (nvs_ptr >= (u8 *) wl->nvs + nvs_len)
+ goto out_badnvs;
+ }
+
+ /*
+ * We've reached the first zero length, the first NVS table
+ * is located at an aligned offset which is at least 7 bytes further.
+ * NOTE: The wl->nvs->nvs element must be first, in order to
+ * simplify the casting, we assume it is at the beginning of
+ * the wl->nvs structure.
+ */
+ nvs_ptr = (u8 *)wl->nvs +
+ ALIGN(nvs_ptr - (u8 *)wl->nvs + 7, 4);
+
+ if (nvs_ptr >= (u8 *) wl->nvs + nvs_len)
+ goto out_badnvs;
+
+ nvs_len -= nvs_ptr - (u8 *)wl->nvs;
+
+ /* Now we must set the partition correctly */
+ wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
+
+ /* Copy the NVS tables to a new block to ensure alignment */
+ nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL);
+ if (!nvs_aligned)
+ return -ENOMEM;
+
+ /* And finally we upload the NVS tables */
+ wlcore_write_data(wl, REG_CMD_MBOX_ADDRESS,
+ nvs_aligned, nvs_len, false);
+
+ kfree(nvs_aligned);
+ return 0;
+
+out_badnvs:
+ wl1271_error("nvs data is malformed");
+ return -EILSEQ;
+}
+EXPORT_SYMBOL_GPL(wlcore_boot_upload_nvs);
+
+int wlcore_boot_run_firmware(struct wl1271 *wl)
+{
+ int loop, ret;
+ u32 chip_id, intr;
+
+ /* Make sure we have the boot partition */
+ wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
+
+ wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
+
+ chip_id = wlcore_read_reg(wl, REG_CHIP_ID_B);
+
+ wl1271_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
+
+ if (chip_id != wl->chip.id) {
+ wl1271_error("chip id doesn't match after firmware boot");
+ return -EIO;
+ }
+
+ /* wait for init to complete */
+ loop = 0;
+ while (loop++ < INIT_LOOP) {
+ udelay(INIT_LOOP_DELAY);
+ intr = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR);
+
+ if (intr == 0xffffffff) {
+ wl1271_error("error reading hardware complete "
+ "init indication");
+ return -EIO;
+ }
+ /* check that ACX_INTR_INIT_COMPLETE is enabled */
+ else if (intr & WL1271_ACX_INTR_INIT_COMPLETE) {
+ wlcore_write_reg(wl, REG_INTERRUPT_ACK,
+ WL1271_ACX_INTR_INIT_COMPLETE);
+ break;
+ }
+ }
+
+ if (loop > INIT_LOOP) {
+ wl1271_error("timeout waiting for the hardware to "
+ "complete initialization");
+ return -EIO;
+ }
+
+ /* get hardware config command mail box */
+ wl->cmd_box_addr = wlcore_read_reg(wl, REG_COMMAND_MAILBOX_PTR);
+
+ wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x", wl->cmd_box_addr);
+
+ /* get hardware config event mail box */
+ wl->mbox_ptr[0] = wlcore_read_reg(wl, REG_EVENT_MAILBOX_PTR);
+ wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox);
+
+ wl1271_debug(DEBUG_MAILBOX, "MBOX ptrs: 0x%x 0x%x",
+ wl->mbox_ptr[0], wl->mbox_ptr[1]);
+
+ ret = wlcore_boot_fw_version(wl);
+ if (ret < 0) {
+ wl1271_error("couldn't boot firmware");
+ return ret;
+ }
+
+ /*
+ * in case of full asynchronous mode the firmware event must be
+ * ready to receive event from the command mailbox
+ */
+
+ /* unmask required mbox events */
+ wl->event_mask = BSS_LOSE_EVENT_ID |
+ SCAN_COMPLETE_EVENT_ID |
+ ROLE_STOP_COMPLETE_EVENT_ID |
+ RSSI_SNR_TRIGGER_0_EVENT_ID |
+ PSPOLL_DELIVERY_FAILURE_EVENT_ID |
+ SOFT_GEMINI_SENSE_EVENT_ID |
+ PERIODIC_SCAN_REPORT_EVENT_ID |
+ PERIODIC_SCAN_COMPLETE_EVENT_ID |
+ DUMMY_PACKET_EVENT_ID |
+ PEER_REMOVE_COMPLETE_EVENT_ID |
+ BA_SESSION_RX_CONSTRAINT_EVENT_ID |
+ REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID |
+ INACTIVE_STA_EVENT_ID |
+ MAX_TX_RETRY_EVENT_ID |
+ CHANNEL_SWITCH_COMPLETE_EVENT_ID;
+
+ ret = wl1271_event_unmask(wl);
+ if (ret < 0) {
+ wl1271_error("EVENT mask setting failed");
+ return ret;
+ }
+
+ /* set the working partition to its "running" mode offset */
+ wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
+
+ /* firmware startup completed */
+ return 0;
+}
+EXPORT_SYMBOL_GPL(wlcore_boot_run_firmware);
diff --git a/drivers/net/wireless/ti/wlcore/boot.h b/drivers/net/wireless/ti/wlcore/boot.h
new file mode 100644
index 0000000..094981d
--- /dev/null
+++ b/drivers/net/wireless/ti/wlcore/boot.h
@@ -0,0 +1,54 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __BOOT_H__
+#define __BOOT_H__
+
+#include "wlcore.h"
+
+int wlcore_boot_upload_firmware(struct wl1271 *wl);
+int wlcore_boot_upload_nvs(struct wl1271 *wl);
+int wlcore_boot_run_firmware(struct wl1271 *wl);
+
+#define WL1271_NO_SUBBANDS 8
+#define WL1271_NO_POWER_LEVELS 4
+#define WL1271_FW_VERSION_MAX_LEN 20
+
+struct wl1271_static_data {
+ u8 mac_address[ETH_ALEN];
+ u8 padding[2];
+ u8 fw_version[WL1271_FW_VERSION_MAX_LEN];
+ u32 hw_version;
+ u8 tx_power_table[WL1271_NO_SUBBANDS][WL1271_NO_POWER_LEVELS];
+};
+
+/* number of times we try to read the INIT interrupt */
+#define INIT_LOOP 20000
+
+/* delay between retries */
+#define INIT_LOOP_DELAY 50
+
+#define WU_COUNTER_PAUSE_VAL 0x3FF
+#define WELP_ARM_COMMAND_VAL 0x4
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c
similarity index 84%
rename from drivers/net/wireless/wl12xx/cmd.c
rename to drivers/net/wireless/ti/wlcore/cmd.c
index 3414fc1..5c4716c 100644
--- a/drivers/net/wireless/wl12xx/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -28,9 +28,8 @@
#include <linux/ieee80211.h>
#include <linux/slab.h>
-#include "wl12xx.h"
+#include "wlcore.h"
#include "debug.h"
-#include "reg.h"
#include "io.h"
#include "acx.h"
#include "wl12xx_80211.h"
@@ -67,11 +66,15 @@
wl1271_write(wl, wl->cmd_box_addr, buf, len, false);
- wl1271_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
+ /*
+ * TODO: we just need this because one bit is in a different
+ * place. Is there any better way?
+ */
+ wl->ops->trigger_cmd(wl, wl->cmd_box_addr, buf, len);
timeout = jiffies + msecs_to_jiffies(WL1271_COMMAND_TIMEOUT);
- intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+ intr = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR);
while (!(intr & WL1271_ACX_INTR_CMD_COMPLETE)) {
if (time_after(jiffies, timeout)) {
wl1271_error("command complete timeout");
@@ -85,7 +88,7 @@
else
msleep(1);
- intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+ intr = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR);
}
/* read back the status code of the command */
@@ -100,8 +103,7 @@
goto fail;
}
- wl1271_write32(wl, ACX_REG_INTERRUPT_ACK,
- WL1271_ACX_INTR_CMD_COMPLETE);
+ wlcore_write_reg(wl, REG_INTERRUPT_ACK, WL1271_ACX_INTR_CMD_COMPLETE);
return 0;
fail:
@@ -110,240 +112,18 @@
return ret;
}
-int wl1271_cmd_general_parms(struct wl1271 *wl)
-{
- struct wl1271_general_parms_cmd *gen_parms;
- struct wl1271_ini_general_params *gp =
- &((struct wl1271_nvs_file *)wl->nvs)->general_params;
- bool answer = false;
- int ret;
-
- if (!wl->nvs)
- return -ENODEV;
-
- if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) {
- wl1271_warning("FEM index from INI out of bounds");
- return -EINVAL;
- }
-
- gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
- if (!gen_parms)
- return -ENOMEM;
-
- gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM;
-
- memcpy(&gen_parms->general_params, gp, sizeof(*gp));
-
- if (gp->tx_bip_fem_auto_detect)
- answer = true;
-
- /* Override the REF CLK from the NVS with the one from platform data */
- gen_parms->general_params.ref_clock = wl->ref_clock;
-
- ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer);
- if (ret < 0) {
- wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
- goto out;
- }
-
- gp->tx_bip_fem_manufacturer =
- gen_parms->general_params.tx_bip_fem_manufacturer;
-
- if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) {
- wl1271_warning("FEM index from FW out of bounds");
- ret = -EINVAL;
- goto out;
- }
-
- wl1271_debug(DEBUG_CMD, "FEM autodetect: %s, manufacturer: %d\n",
- answer ? "auto" : "manual", gp->tx_bip_fem_manufacturer);
-
-out:
- kfree(gen_parms);
- return ret;
-}
-
-int wl128x_cmd_general_parms(struct wl1271 *wl)
-{
- struct wl128x_general_parms_cmd *gen_parms;
- struct wl128x_ini_general_params *gp =
- &((struct wl128x_nvs_file *)wl->nvs)->general_params;
- bool answer = false;
- int ret;
-
- if (!wl->nvs)
- return -ENODEV;
-
- if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) {
- wl1271_warning("FEM index from ini out of bounds");
- return -EINVAL;
- }
-
- gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
- if (!gen_parms)
- return -ENOMEM;
-
- gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM;
-
- memcpy(&gen_parms->general_params, gp, sizeof(*gp));
-
- if (gp->tx_bip_fem_auto_detect)
- answer = true;
-
- /* Replace REF and TCXO CLKs with the ones from platform data */
- gen_parms->general_params.ref_clock = wl->ref_clock;
- gen_parms->general_params.tcxo_ref_clock = wl->tcxo_clock;
-
- ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer);
- if (ret < 0) {
- wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
- goto out;
- }
-
- gp->tx_bip_fem_manufacturer =
- gen_parms->general_params.tx_bip_fem_manufacturer;
-
- if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) {
- wl1271_warning("FEM index from FW out of bounds");
- ret = -EINVAL;
- goto out;
- }
-
- wl1271_debug(DEBUG_CMD, "FEM autodetect: %s, manufacturer: %d\n",
- answer ? "auto" : "manual", gp->tx_bip_fem_manufacturer);
-
-out:
- kfree(gen_parms);
- return ret;
-}
-
-int wl1271_cmd_radio_parms(struct wl1271 *wl)
-{
- struct wl1271_nvs_file *nvs = (struct wl1271_nvs_file *)wl->nvs;
- struct wl1271_radio_parms_cmd *radio_parms;
- struct wl1271_ini_general_params *gp = &nvs->general_params;
- int ret;
-
- if (!wl->nvs)
- return -ENODEV;
-
- radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL);
- if (!radio_parms)
- return -ENOMEM;
-
- radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM;
-
- /* 2.4GHz parameters */
- memcpy(&radio_parms->static_params_2, &nvs->stat_radio_params_2,
- sizeof(struct wl1271_ini_band_params_2));
- memcpy(&radio_parms->dyn_params_2,
- &nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params,
- sizeof(struct wl1271_ini_fem_params_2));
-
- /* 5GHz parameters */
- memcpy(&radio_parms->static_params_5,
- &nvs->stat_radio_params_5,
- sizeof(struct wl1271_ini_band_params_5));
- memcpy(&radio_parms->dyn_params_5,
- &nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params,
- sizeof(struct wl1271_ini_fem_params_5));
-
- wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ",
- radio_parms, sizeof(*radio_parms));
-
- ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0);
- if (ret < 0)
- wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed");
-
- kfree(radio_parms);
- return ret;
-}
-
-int wl128x_cmd_radio_parms(struct wl1271 *wl)
-{
- struct wl128x_nvs_file *nvs = (struct wl128x_nvs_file *)wl->nvs;
- struct wl128x_radio_parms_cmd *radio_parms;
- struct wl128x_ini_general_params *gp = &nvs->general_params;
- int ret;
-
- if (!wl->nvs)
- return -ENODEV;
-
- radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL);
- if (!radio_parms)
- return -ENOMEM;
-
- radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM;
-
- /* 2.4GHz parameters */
- memcpy(&radio_parms->static_params_2, &nvs->stat_radio_params_2,
- sizeof(struct wl128x_ini_band_params_2));
- memcpy(&radio_parms->dyn_params_2,
- &nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params,
- sizeof(struct wl128x_ini_fem_params_2));
-
- /* 5GHz parameters */
- memcpy(&radio_parms->static_params_5,
- &nvs->stat_radio_params_5,
- sizeof(struct wl128x_ini_band_params_5));
- memcpy(&radio_parms->dyn_params_5,
- &nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params,
- sizeof(struct wl128x_ini_fem_params_5));
-
- radio_parms->fem_vendor_and_options = nvs->fem_vendor_and_options;
-
- wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ",
- radio_parms, sizeof(*radio_parms));
-
- ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0);
- if (ret < 0)
- wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed");
-
- kfree(radio_parms);
- return ret;
-}
-
-int wl1271_cmd_ext_radio_parms(struct wl1271 *wl)
-{
- struct wl1271_ext_radio_parms_cmd *ext_radio_parms;
- struct conf_rf_settings *rf = &wl->conf.rf;
- int ret;
-
- if (!wl->nvs)
- return -ENODEV;
-
- ext_radio_parms = kzalloc(sizeof(*ext_radio_parms), GFP_KERNEL);
- if (!ext_radio_parms)
- return -ENOMEM;
-
- ext_radio_parms->test.id = TEST_CMD_INI_FILE_RF_EXTENDED_PARAM;
-
- memcpy(ext_radio_parms->tx_per_channel_power_compensation_2,
- rf->tx_per_channel_power_compensation_2,
- CONF_TX_PWR_COMPENSATION_LEN_2);
- memcpy(ext_radio_parms->tx_per_channel_power_compensation_5,
- rf->tx_per_channel_power_compensation_5,
- CONF_TX_PWR_COMPENSATION_LEN_5);
-
- wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_EXT_RADIO_PARAM: ",
- ext_radio_parms, sizeof(*ext_radio_parms));
-
- ret = wl1271_cmd_test(wl, ext_radio_parms, sizeof(*ext_radio_parms), 0);
- if (ret < 0)
- wl1271_warning("TEST_CMD_INI_FILE_RF_EXTENDED_PARAM failed");
-
- kfree(ext_radio_parms);
- return ret;
-}
-
/*
* Poll the mailbox event field until any of the bits in the mask is set or a
* timeout occurs (WL1271_EVENT_TIMEOUT in msecs)
*/
static int wl1271_cmd_wait_for_event_or_timeout(struct wl1271 *wl, u32 mask)
{
- u32 events_vector, event;
+ u32 *events_vector;
+ u32 event;
unsigned long timeout;
+ int ret = 0;
+
+ events_vector = kmalloc(sizeof(*events_vector), GFP_DMA);
timeout = jiffies + msecs_to_jiffies(WL1271_EVENT_TIMEOUT);
@@ -351,21 +131,24 @@
if (time_after(jiffies, timeout)) {
wl1271_debug(DEBUG_CMD, "timeout waiting for event %d",
(int)mask);
- return -ETIMEDOUT;
+ ret = -ETIMEDOUT;
+ goto out;
}
msleep(1);
/* read from both event fields */
- wl1271_read(wl, wl->mbox_ptr[0], &events_vector,
- sizeof(events_vector), false);
- event = events_vector & mask;
- wl1271_read(wl, wl->mbox_ptr[1], &events_vector,
- sizeof(events_vector), false);
- event |= events_vector & mask;
+ wl1271_read(wl, wl->mbox_ptr[0], events_vector,
+ sizeof(*events_vector), false);
+ event = *events_vector & mask;
+ wl1271_read(wl, wl->mbox_ptr[1], events_vector,
+ sizeof(*events_vector), false);
+ event |= *events_vector & mask;
} while (!event);
- return 0;
+out:
+ kfree(events_vector);
+ return ret;
}
static int wl1271_cmd_wait_for_event(struct wl1271 *wl, u32 mask)
@@ -522,7 +305,7 @@
cmd->role_id = wlvif->dev_role_id;
if (wlvif->band == IEEE80211_BAND_5GHZ)
- cmd->band = WL12XX_BAND_5GHZ;
+ cmd->band = WLCORE_BAND_5GHZ;
cmd->channel = wlvif->channel;
if (wlvif->dev_hlid == WL12XX_INVALID_LINK_ID) {
@@ -613,7 +396,7 @@
cmd->role_id = wlvif->role_id;
if (wlvif->band == IEEE80211_BAND_5GHZ)
- cmd->band = WL12XX_BAND_5GHZ;
+ cmd->band = WLCORE_BAND_5GHZ;
cmd->channel = wlvif->channel;
cmd->sta.basic_rate_set = cpu_to_le32(wlvif->basic_rate_set);
cmd->sta.beacon_interval = cpu_to_le16(wlvif->beacon_int);
@@ -750,14 +533,14 @@
switch (wlvif->band) {
case IEEE80211_BAND_2GHZ:
- cmd->band = RADIO_BAND_2_4GHZ;
+ cmd->band = WLCORE_BAND_2_4GHZ;
break;
case IEEE80211_BAND_5GHZ:
- cmd->band = RADIO_BAND_5GHZ;
+ cmd->band = WLCORE_BAND_5GHZ;
break;
default:
wl1271_warning("ap start - unknown band: %d", (int)wlvif->band);
- cmd->band = RADIO_BAND_2_4GHZ;
+ cmd->band = WLCORE_BAND_2_4GHZ;
break;
}
@@ -830,7 +613,7 @@
cmd->role_id = wlvif->role_id;
if (wlvif->band == IEEE80211_BAND_5GHZ)
- cmd->band = WL12XX_BAND_5GHZ;
+ cmd->band = WLCORE_BAND_5GHZ;
cmd->channel = wlvif->channel;
cmd->ibss.basic_rate_set = cpu_to_le32(wlvif->basic_rate_set);
cmd->ibss.beacon_interval = cpu_to_le16(wlvif->beacon_int);
@@ -904,6 +687,7 @@
return ret;
}
+EXPORT_SYMBOL_GPL(wl1271_cmd_test);
/**
* read acx from firmware
@@ -960,6 +744,7 @@
return 0;
}
+EXPORT_SYMBOL_GPL(wl1271_cmd_configure);
int wl1271_cmd_data_path(struct wl1271 *wl, bool enable)
{
@@ -1730,10 +1515,10 @@
cmd->channel = wlvif->channel;
switch (wlvif->band) {
case IEEE80211_BAND_2GHZ:
- cmd->band = RADIO_BAND_2_4GHZ;
+ cmd->band = WLCORE_BAND_2_4GHZ;
break;
case IEEE80211_BAND_5GHZ:
- cmd->band = RADIO_BAND_5GHZ;
+ cmd->band = WLCORE_BAND_5GHZ;
break;
default:
wl1271_error("roc - unknown band: %d", (int)wlvif->band);
diff --git a/drivers/net/wireless/wl12xx/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h
similarity index 87%
rename from drivers/net/wireless/wl12xx/cmd.h
rename to drivers/net/wireless/ti/wlcore/cmd.h
index de217d9..a46ae07 100644
--- a/drivers/net/wireless/wl12xx/cmd.h
+++ b/drivers/net/wireless/ti/wlcore/cmd.h
@@ -25,17 +25,12 @@
#ifndef __CMD_H__
#define __CMD_H__
-#include "wl12xx.h"
+#include "wlcore.h"
struct acx_header;
int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
size_t res_len);
-int wl1271_cmd_general_parms(struct wl1271 *wl);
-int wl128x_cmd_general_parms(struct wl1271 *wl);
-int wl1271_cmd_radio_parms(struct wl1271 *wl);
-int wl128x_cmd_radio_parms(struct wl1271 *wl);
-int wl1271_cmd_ext_radio_parms(struct wl1271 *wl);
int wl12xx_cmd_role_enable(struct wl1271 *wl, u8 *addr, u8 role_type,
u8 *role_id);
int wl12xx_cmd_role_disable(struct wl1271 *wl, u8 *role_id);
@@ -262,13 +257,13 @@
u8 padding[3];
} __packed;
-enum wl12xx_band {
- WL12XX_BAND_2_4GHZ = 0,
- WL12XX_BAND_5GHZ = 1,
- WL12XX_BAND_JAPAN_4_9_GHZ = 2,
- WL12XX_BAND_DEFAULT = WL12XX_BAND_2_4GHZ,
- WL12XX_BAND_INVALID = 0x7E,
- WL12XX_BAND_MAX_RADIO = 0x7F,
+enum wlcore_band {
+ WLCORE_BAND_2_4GHZ = 0,
+ WLCORE_BAND_5GHZ = 1,
+ WLCORE_BAND_JAPAN_4_9_GHZ = 2,
+ WLCORE_BAND_DEFAULT = WLCORE_BAND_2_4GHZ,
+ WLCORE_BAND_INVALID = 0x7E,
+ WLCORE_BAND_MAX_RADIO = 0x7F,
};
struct wl12xx_cmd_role_start {
@@ -494,83 +489,6 @@
#define WL1271_PD_REFERENCE_POINT_BAND_B_G 0
-#define TEST_CMD_INI_FILE_RADIO_PARAM 0x19
-#define TEST_CMD_INI_FILE_GENERAL_PARAM 0x1E
-#define TEST_CMD_INI_FILE_RF_EXTENDED_PARAM 0x26
-
-struct wl1271_general_parms_cmd {
- struct wl1271_cmd_header header;
-
- struct wl1271_cmd_test_header test;
-
- struct wl1271_ini_general_params general_params;
-
- u8 sr_debug_table[WL1271_INI_MAX_SMART_REFLEX_PARAM];
- u8 sr_sen_n_p;
- u8 sr_sen_n_p_gain;
- u8 sr_sen_nrn;
- u8 sr_sen_prn;
- u8 padding[3];
-} __packed;
-
-struct wl128x_general_parms_cmd {
- struct wl1271_cmd_header header;
-
- struct wl1271_cmd_test_header test;
-
- struct wl128x_ini_general_params general_params;
-
- u8 sr_debug_table[WL1271_INI_MAX_SMART_REFLEX_PARAM];
- u8 sr_sen_n_p;
- u8 sr_sen_n_p_gain;
- u8 sr_sen_nrn;
- u8 sr_sen_prn;
- u8 padding[3];
-} __packed;
-
-struct wl1271_radio_parms_cmd {
- struct wl1271_cmd_header header;
-
- struct wl1271_cmd_test_header test;
-
- /* Static radio parameters */
- struct wl1271_ini_band_params_2 static_params_2;
- struct wl1271_ini_band_params_5 static_params_5;
-
- /* Dynamic radio parameters */
- struct wl1271_ini_fem_params_2 dyn_params_2;
- u8 padding2;
- struct wl1271_ini_fem_params_5 dyn_params_5;
- u8 padding3[2];
-} __packed;
-
-struct wl128x_radio_parms_cmd {
- struct wl1271_cmd_header header;
-
- struct wl1271_cmd_test_header test;
-
- /* Static radio parameters */
- struct wl128x_ini_band_params_2 static_params_2;
- struct wl128x_ini_band_params_5 static_params_5;
-
- u8 fem_vendor_and_options;
-
- /* Dynamic radio parameters */
- struct wl128x_ini_fem_params_2 dyn_params_2;
- u8 padding2;
- struct wl128x_ini_fem_params_5 dyn_params_5;
-} __packed;
-
-struct wl1271_ext_radio_parms_cmd {
- struct wl1271_cmd_header header;
-
- struct wl1271_cmd_test_header test;
-
- u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2];
- u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5];
- u8 padding[3];
-} __packed;
-
/*
* There are three types of disconnections:
*
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/ti/wlcore/conf.h
similarity index 93%
rename from drivers/net/wireless/wl12xx/conf.h
rename to drivers/net/wireless/ti/wlcore/conf.h
index 3e581e1..fef0db4 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/ti/wlcore/conf.h
@@ -65,36 +65,7 @@
CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_54MBPS,
};
-enum {
- CONF_HW_RXTX_RATE_MCS7_SGI = 0,
- CONF_HW_RXTX_RATE_MCS7,
- CONF_HW_RXTX_RATE_MCS6,
- CONF_HW_RXTX_RATE_MCS5,
- CONF_HW_RXTX_RATE_MCS4,
- CONF_HW_RXTX_RATE_MCS3,
- CONF_HW_RXTX_RATE_MCS2,
- CONF_HW_RXTX_RATE_MCS1,
- CONF_HW_RXTX_RATE_MCS0,
- CONF_HW_RXTX_RATE_54,
- CONF_HW_RXTX_RATE_48,
- CONF_HW_RXTX_RATE_36,
- CONF_HW_RXTX_RATE_24,
- CONF_HW_RXTX_RATE_22,
- CONF_HW_RXTX_RATE_18,
- CONF_HW_RXTX_RATE_12,
- CONF_HW_RXTX_RATE_11,
- CONF_HW_RXTX_RATE_9,
- CONF_HW_RXTX_RATE_6,
- CONF_HW_RXTX_RATE_5_5,
- CONF_HW_RXTX_RATE_2,
- CONF_HW_RXTX_RATE_1,
- CONF_HW_RXTX_RATE_MAX,
- CONF_HW_RXTX_RATE_UNSUPPORTED = 0xff
-};
-
-/* Rates between and including these are MCS rates */
-#define CONF_HW_RXTX_RATE_MCS_MIN CONF_HW_RXTX_RATE_MCS7_SGI
-#define CONF_HW_RXTX_RATE_MCS_MAX CONF_HW_RXTX_RATE_MCS0
+#define CONF_HW_RXTX_RATE_UNSUPPORTED 0xff
enum {
CONF_SG_DISABLE = 0,
@@ -1096,16 +1067,31 @@
};
struct conf_sched_scan_settings {
- /* minimum time to wait on the channel for active scans (in TUs) */
- u16 min_dwell_time_active;
+ /*
+ * The base time to wait on the channel for active scans (in TU/1000).
+ * The minimum dwell time is calculated according to this:
+ * min_dwell_time = base + num_of_probes_to_be_sent * delta_per_probe
+ * The maximum dwell time is calculated according to this:
+ * max_dwell_time = min_dwell_time + max_dwell_time_delta
+ */
+ u32 base_dwell_time;
- /* maximum time to wait on the channel for active scans (in TUs) */
- u16 max_dwell_time_active;
+ /* The delta between the min dwell time and max dwell time for
+ * active scans (in TU/1000s). The max dwell time is used by the FW once
+ * traffic is detected on the channel.
+ */
+ u32 max_dwell_time_delta;
- /* time to wait on the channel for passive scans (in TUs) */
+ /* Delta added to min dwell time per each probe in 2.4 GHz (TU/1000) */
+ u32 dwell_time_delta_per_probe;
+
+ /* Delta added to min dwell time per each probe in 5 GHz (TU/1000) */
+ u32 dwell_time_delta_per_probe_5;
+
+ /* time to wait on the channel for passive scans (in TU/1000) */
u32 dwell_time_passive;
- /* time to wait on the channel for DFS scans (in TUs) */
+ /* time to wait on the channel for DFS scans (in TU/1000) */
u32 dwell_time_dfs;
/* number of probe requests to send on each channel in active scans */
@@ -1118,26 +1104,6 @@
s8 snr_threshold;
};
-/* these are number of channels on the band divided by two, rounded up */
-#define CONF_TX_PWR_COMPENSATION_LEN_2 7
-#define CONF_TX_PWR_COMPENSATION_LEN_5 18
-
-struct conf_rf_settings {
- /*
- * Per channel power compensation for 2.4GHz
- *
- * Range: s8
- */
- u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2];
-
- /*
- * Per channel power compensation for 5GHz
- *
- * Range: s8
- */
- u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5];
-};
-
struct conf_ht_setting {
u8 rx_ba_win_size;
u8 tx_ba_win_size;
@@ -1286,7 +1252,7 @@
u8 window_size;
};
-struct conf_drv_settings {
+struct wlcore_conf {
struct conf_sg_settings sg;
struct conf_rx_settings rx;
struct conf_tx_settings tx;
@@ -1296,16 +1262,13 @@
struct conf_roam_trigger_settings roam_trigger;
struct conf_scan_settings scan;
struct conf_sched_scan_settings sched_scan;
- struct conf_rf_settings rf;
struct conf_ht_setting ht;
- struct conf_memory_settings mem_wl127x;
- struct conf_memory_settings mem_wl128x;
+ struct conf_memory_settings mem;
struct conf_fm_coex fm_coex;
struct conf_rx_streaming_settings rx_streaming;
struct conf_fwlog fwlog;
struct conf_rate_policy_settings rate;
struct conf_hangover_settings hangover;
- u8 hci_io_ds;
};
#endif
diff --git a/drivers/net/wireless/wl12xx/debug.h b/drivers/net/wireless/ti/wlcore/debug.h
similarity index 98%
rename from drivers/net/wireless/wl12xx/debug.h
rename to drivers/net/wireless/ti/wlcore/debug.h
index ec0fdc2..6b800b3 100644
--- a/drivers/net/wireless/wl12xx/debug.h
+++ b/drivers/net/wireless/ti/wlcore/debug.h
@@ -52,6 +52,7 @@
DEBUG_ADHOC = BIT(16),
DEBUG_AP = BIT(17),
DEBUG_PROBE = BIT(18),
+ DEBUG_IO = BIT(19),
DEBUG_MASTER = (DEBUG_ADHOC | DEBUG_AP),
DEBUG_ALL = ~0,
};
diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/ti/wlcore/debugfs.c
similarity index 99%
rename from drivers/net/wireless/wl12xx/debugfs.c
rename to drivers/net/wireless/ti/wlcore/debugfs.c
index e1cf727..0b775e3 100644
--- a/drivers/net/wireless/wl12xx/debugfs.c
+++ b/drivers/net/wireless/ti/wlcore/debugfs.c
@@ -26,7 +26,7 @@
#include <linux/skbuff.h>
#include <linux/slab.h>
-#include "wl12xx.h"
+#include "wlcore.h"
#include "debug.h"
#include "acx.h"
#include "ps.h"
@@ -653,6 +653,7 @@
VIF_STATE_PRINT_INT(last_rssi_event);
VIF_STATE_PRINT_INT(ba_support);
VIF_STATE_PRINT_INT(ba_allowed);
+ VIF_STATE_PRINT_INT(is_gem);
VIF_STATE_PRINT_LLHEX(tx_security_seq);
VIF_STATE_PRINT_INT(tx_security_last_seq_lsb);
}
diff --git a/drivers/net/wireless/wl12xx/debugfs.h b/drivers/net/wireless/ti/wlcore/debugfs.h
similarity index 97%
rename from drivers/net/wireless/wl12xx/debugfs.h
rename to drivers/net/wireless/ti/wlcore/debugfs.h
index 254c5b2..a8d3aef 100644
--- a/drivers/net/wireless/wl12xx/debugfs.h
+++ b/drivers/net/wireless/ti/wlcore/debugfs.h
@@ -24,7 +24,7 @@
#ifndef __DEBUGFS_H__
#define __DEBUGFS_H__
-#include "wl12xx.h"
+#include "wlcore.h"
int wl1271_debugfs_init(struct wl1271 *wl);
void wl1271_debugfs_exit(struct wl1271 *wl);
diff --git a/drivers/net/wireless/wl12xx/event.c b/drivers/net/wireless/ti/wlcore/event.c
similarity index 91%
rename from drivers/net/wireless/wl12xx/event.c
rename to drivers/net/wireless/ti/wlcore/event.c
index c953717..292632d 100644
--- a/drivers/net/wireless/wl12xx/event.c
+++ b/drivers/net/wireless/ti/wlcore/event.c
@@ -21,9 +21,8 @@
*
*/
-#include "wl12xx.h"
+#include "wlcore.h"
#include "debug.h"
-#include "reg.h"
#include "io.h"
#include "event.h"
#include "ps.h"
@@ -98,8 +97,9 @@
wl1271_debug(DEBUG_EVENT, "\tmask: 0x%x", mbox->events_mask);
}
-static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
+static int wl1271_event_process(struct wl1271 *wl)
{
+ struct event_mailbox *mbox = wl->mbox;
struct ieee80211_vif *vif;
struct wl12xx_vif *wlvif;
u32 vector;
@@ -196,7 +196,7 @@
bool success;
if (!test_and_clear_bit(WLVIF_FLAG_CS_PROGRESS,
- &wl->flags))
+ &wlvif->flags))
continue;
success = mbox->channel_switch_status ? false : true;
@@ -278,18 +278,8 @@
return 0;
}
-void wl1271_event_mbox_config(struct wl1271 *wl)
-{
- wl->mbox_ptr[0] = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR);
- wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox);
-
- wl1271_debug(DEBUG_EVENT, "MBOX ptrs: 0x%x 0x%x",
- wl->mbox_ptr[0], wl->mbox_ptr[1]);
-}
-
int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num)
{
- struct event_mailbox mbox;
int ret;
wl1271_debug(DEBUG_EVENT, "EVENT on mbox %d", mbox_num);
@@ -298,16 +288,19 @@
return -EINVAL;
/* first we read the mbox descriptor */
- wl1271_read(wl, wl->mbox_ptr[mbox_num], &mbox,
- sizeof(struct event_mailbox), false);
+ wl1271_read(wl, wl->mbox_ptr[mbox_num], wl->mbox,
+ sizeof(*wl->mbox), false);
/* process the descriptor */
- ret = wl1271_event_process(wl, &mbox);
+ ret = wl1271_event_process(wl);
if (ret < 0)
return ret;
- /* then we let the firmware know it can go on...*/
- wl1271_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK);
+ /*
+ * TODO: we just need this because one bit is in a different
+ * place. Is there any better way?
+ */
+ wl->ops->ack_event(wl);
return 0;
}
diff --git a/drivers/net/wireless/wl12xx/event.h b/drivers/net/wireless/ti/wlcore/event.h
similarity index 98%
rename from drivers/net/wireless/wl12xx/event.h
rename to drivers/net/wireless/ti/wlcore/event.h
index 057d193..8adf18d 100644
--- a/drivers/net/wireless/wl12xx/event.h
+++ b/drivers/net/wireless/ti/wlcore/event.h
@@ -132,8 +132,9 @@
u8 reserved_8[9];
} __packed;
+struct wl1271;
+
int wl1271_event_unmask(struct wl1271 *wl);
-void wl1271_event_mbox_config(struct wl1271 *wl);
int wl1271_event_handle(struct wl1271 *wl, u8 mbox);
#endif
diff --git a/drivers/net/wireless/ti/wlcore/hw_ops.h b/drivers/net/wireless/ti/wlcore/hw_ops.h
new file mode 100644
index 0000000..9384b4d
--- /dev/null
+++ b/drivers/net/wireless/ti/wlcore/hw_ops.h
@@ -0,0 +1,122 @@
+/*
+ * This file is part of wlcore
+ *
+ * Copyright (C) 2011 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WLCORE_HW_OPS_H__
+#define __WLCORE_HW_OPS_H__
+
+#include "wlcore.h"
+#include "rx.h"
+
+static inline u32
+wlcore_hw_calc_tx_blocks(struct wl1271 *wl, u32 len, u32 spare_blks)
+{
+ if (!wl->ops->calc_tx_blocks)
+ BUG_ON(1);
+
+ return wl->ops->calc_tx_blocks(wl, len, spare_blks);
+}
+
+static inline void
+wlcore_hw_set_tx_desc_blocks(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc,
+ u32 blks, u32 spare_blks)
+{
+ if (!wl->ops->set_tx_desc_blocks)
+ BUG_ON(1);
+
+ return wl->ops->set_tx_desc_blocks(wl, desc, blks, spare_blks);
+}
+
+static inline void
+wlcore_hw_set_tx_desc_data_len(struct wl1271 *wl,
+ struct wl1271_tx_hw_descr *desc,
+ struct sk_buff *skb)
+{
+ if (!wl->ops->set_tx_desc_data_len)
+ BUG_ON(1);
+
+ wl->ops->set_tx_desc_data_len(wl, desc, skb);
+}
+
+static inline enum wl_rx_buf_align
+wlcore_hw_get_rx_buf_align(struct wl1271 *wl, u32 rx_desc)
+{
+
+ if (!wl->ops->get_rx_buf_align)
+ BUG_ON(1);
+
+ return wl->ops->get_rx_buf_align(wl, rx_desc);
+}
+
+static inline void
+wlcore_hw_prepare_read(struct wl1271 *wl, u32 rx_desc, u32 len)
+{
+ if (wl->ops->prepare_read)
+ wl->ops->prepare_read(wl, rx_desc, len);
+}
+
+static inline u32
+wlcore_hw_get_rx_packet_len(struct wl1271 *wl, void *rx_data, u32 data_len)
+{
+ if (!wl->ops->get_rx_packet_len)
+ BUG_ON(1);
+
+ return wl->ops->get_rx_packet_len(wl, rx_data, data_len);
+}
+
+static inline void wlcore_hw_tx_delayed_compl(struct wl1271 *wl)
+{
+ if (wl->ops->tx_delayed_compl)
+ wl->ops->tx_delayed_compl(wl);
+}
+
+static inline void wlcore_hw_tx_immediate_compl(struct wl1271 *wl)
+{
+ if (wl->ops->tx_immediate_compl)
+ wl->ops->tx_immediate_compl(wl);
+}
+
+static inline int
+wlcore_hw_init_vif(struct wl1271 *wl, struct wl12xx_vif *wlvif)
+{
+ if (wl->ops->init_vif)
+ return wl->ops->init_vif(wl, wlvif);
+
+ return 0;
+}
+
+static inline u32
+wlcore_hw_sta_get_ap_rate_mask(struct wl1271 *wl, struct wl12xx_vif *wlvif)
+{
+ if (!wl->ops->sta_get_ap_rate_mask)
+ BUG_ON(1);
+
+ return wl->ops->sta_get_ap_rate_mask(wl, wlvif);
+}
+
+static inline int wlcore_identify_fw(struct wl1271 *wl)
+{
+ if (wl->ops->identify_fw)
+ return wl->ops->identify_fw(wl);
+
+ return 0;
+}
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/ini.h b/drivers/net/wireless/ti/wlcore/ini.h
similarity index 100%
rename from drivers/net/wireless/wl12xx/ini.h
rename to drivers/net/wireless/ti/wlcore/ini.h
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/ti/wlcore/init.c
similarity index 93%
rename from drivers/net/wireless/wl12xx/init.c
rename to drivers/net/wireless/ti/wlcore/init.c
index 203fbeb..9f89255 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/ti/wlcore/init.c
@@ -30,9 +30,9 @@
#include "wl12xx_80211.h"
#include "acx.h"
#include "cmd.h"
-#include "reg.h"
#include "tx.h"
#include "io.h"
+#include "hw_ops.h"
int wl1271_init_templates_config(struct wl1271 *wl)
{
@@ -319,7 +319,7 @@
{
int ret;
- if (wl->quirks & WL12XX_QUIRK_FWLOG_NOT_IMPLEMENTED)
+ if (wl->quirks & WLCORE_QUIRK_FWLOG_NOT_IMPLEMENTED)
return 0;
ret = wl12xx_cmd_config_fwlog(wl);
@@ -494,26 +494,6 @@
return wl12xx_acx_set_ba_initiator_policy(wl, wlvif);
}
-int wl1271_chip_specific_init(struct wl1271 *wl)
-{
- int ret = 0;
-
- if (wl->chip.id == CHIP_ID_1283_PG20) {
- u32 host_cfg_bitmap = HOST_IF_CFG_RX_FIFO_ENABLE;
-
- if (!(wl->quirks & WL12XX_QUIRK_NO_BLOCKSIZE_ALIGNMENT))
- /* Enable SDIO padding */
- host_cfg_bitmap |= HOST_IF_CFG_TX_PAD_TO_SDIO_BLK;
-
- /* Must be before wl1271_acx_init_mem_config() */
- ret = wl1271_acx_host_if_cfg_bitmap(wl, host_cfg_bitmap);
- if (ret < 0)
- goto out;
- }
-out:
- return ret;
-}
-
/* vif-specifc initialization */
static int wl12xx_init_sta_role(struct wl1271 *wl, struct wl12xx_vif *wlvif)
{
@@ -582,10 +562,17 @@
if (ret < 0)
return ret;
} else if (!wl->sta_count) {
- /* Configure for ELP power saving */
- ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_ELP);
- if (ret < 0)
- return ret;
+ if (wl->quirks & WLCORE_QUIRK_NO_ELP) {
+ /* Configure for power always on */
+ ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM);
+ if (ret < 0)
+ return ret;
+ } else {
+ /* Configure for ELP power saving */
+ ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_ELP);
+ if (ret < 0)
+ return ret;
+ }
}
}
@@ -652,6 +639,10 @@
if (ret < 0)
return ret;
+ ret = wlcore_hw_init_vif(wl, wlvif);
+ if (ret < 0)
+ return ret;
+
return 0;
}
@@ -659,27 +650,8 @@
{
int ret;
- if (wl->chip.id == CHIP_ID_1283_PG20) {
- ret = wl128x_cmd_general_parms(wl);
- if (ret < 0)
- return ret;
- ret = wl128x_cmd_radio_parms(wl);
- if (ret < 0)
- return ret;
- } else {
- ret = wl1271_cmd_general_parms(wl);
- if (ret < 0)
- return ret;
- ret = wl1271_cmd_radio_parms(wl);
- if (ret < 0)
- return ret;
- ret = wl1271_cmd_ext_radio_parms(wl);
- if (ret < 0)
- return ret;
- }
-
- /* Chip-specific init */
- ret = wl1271_chip_specific_init(wl);
+ /* Chip-specific hw init */
+ ret = wl->ops->hw_init(wl);
if (ret < 0)
return ret;
diff --git a/drivers/net/wireless/wl12xx/init.h b/drivers/net/wireless/ti/wlcore/init.h
similarity index 98%
rename from drivers/net/wireless/wl12xx/init.h
rename to drivers/net/wireless/ti/wlcore/init.h
index 2da0f40..a45fbfdd 100644
--- a/drivers/net/wireless/wl12xx/init.h
+++ b/drivers/net/wireless/ti/wlcore/init.h
@@ -24,7 +24,7 @@
#ifndef __INIT_H__
#define __INIT_H__
-#include "wl12xx.h"
+#include "wlcore.h"
int wl1271_hw_init_power_auth(struct wl1271 *wl);
int wl1271_init_templates_config(struct wl1271 *wl);
diff --git a/drivers/net/wireless/ti/wlcore/io.c b/drivers/net/wireless/ti/wlcore/io.c
new file mode 100644
index 0000000..7cd0081
--- /dev/null
+++ b/drivers/net/wireless/ti/wlcore/io.c
@@ -0,0 +1,173 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/interrupt.h>
+
+#include "wlcore.h"
+#include "debug.h"
+#include "wl12xx_80211.h"
+#include "io.h"
+#include "tx.h"
+
+bool wl1271_set_block_size(struct wl1271 *wl)
+{
+ if (wl->if_ops->set_block_size) {
+ wl->if_ops->set_block_size(wl->dev, WL12XX_BUS_BLOCK_SIZE);
+ return true;
+ }
+
+ return false;
+}
+
+void wlcore_disable_interrupts(struct wl1271 *wl)
+{
+ disable_irq(wl->irq);
+}
+EXPORT_SYMBOL_GPL(wlcore_disable_interrupts);
+
+void wlcore_enable_interrupts(struct wl1271 *wl)
+{
+ enable_irq(wl->irq);
+}
+EXPORT_SYMBOL_GPL(wlcore_enable_interrupts);
+
+int wlcore_translate_addr(struct wl1271 *wl, int addr)
+{
+ struct wlcore_partition_set *part = &wl->curr_part;
+
+ /*
+ * To translate, first check to which window of addresses the
+ * particular address belongs. Then subtract the starting address
+ * of that window from the address. Then, add offset of the
+ * translated region.
+ *
+ * The translated regions occur next to each other in physical device
+ * memory, so just add the sizes of the preceding address regions to
+ * get the offset to the new region.
+ */
+ if ((addr >= part->mem.start) &&
+ (addr < part->mem.start + part->mem.size))
+ return addr - part->mem.start;
+ else if ((addr >= part->reg.start) &&
+ (addr < part->reg.start + part->reg.size))
+ return addr - part->reg.start + part->mem.size;
+ else if ((addr >= part->mem2.start) &&
+ (addr < part->mem2.start + part->mem2.size))
+ return addr - part->mem2.start + part->mem.size +
+ part->reg.size;
+ else if ((addr >= part->mem3.start) &&
+ (addr < part->mem3.start + part->mem3.size))
+ return addr - part->mem3.start + part->mem.size +
+ part->reg.size + part->mem2.size;
+
+ WARN(1, "HW address 0x%x out of range", addr);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(wlcore_translate_addr);
+
+/* Set the partitions to access the chip addresses
+ *
+ * To simplify driver code, a fixed (virtual) memory map is defined for
+ * register and memory addresses. Because in the chipset, in different stages
+ * of operation, those addresses will move around, an address translation
+ * mechanism is required.
+ *
+ * There are four partitions (three memory and one register partition),
+ * which are mapped to two different areas of the hardware memory.
+ *
+ * Virtual address
+ * space
+ *
+ * | |
+ * ...+----+--> mem.start
+ * Physical address ... | |
+ * space ... | | [PART_0]
+ * ... | |
+ * 00000000 <--+----+... ...+----+--> mem.start + mem.size
+ * | | ... | |
+ * |MEM | ... | |
+ * | | ... | |
+ * mem.size <--+----+... | | {unused area)
+ * | | ... | |
+ * |REG | ... | |
+ * mem.size | | ... | |
+ * + <--+----+... ...+----+--> reg.start
+ * reg.size | | ... | |
+ * |MEM2| ... | | [PART_1]
+ * | | ... | |
+ * ...+----+--> reg.start + reg.size
+ * | |
+ *
+ */
+void wlcore_set_partition(struct wl1271 *wl,
+ const struct wlcore_partition_set *p)
+{
+ /* copy partition info */
+ memcpy(&wl->curr_part, p, sizeof(*p));
+
+ wl1271_debug(DEBUG_IO, "mem_start %08X mem_size %08X",
+ p->mem.start, p->mem.size);
+ wl1271_debug(DEBUG_IO, "reg_start %08X reg_size %08X",
+ p->reg.start, p->reg.size);
+ wl1271_debug(DEBUG_IO, "mem2_start %08X mem2_size %08X",
+ p->mem2.start, p->mem2.size);
+ wl1271_debug(DEBUG_IO, "mem3_start %08X mem3_size %08X",
+ p->mem3.start, p->mem3.size);
+
+ wl1271_raw_write32(wl, HW_PART0_START_ADDR, p->mem.start);
+ wl1271_raw_write32(wl, HW_PART0_SIZE_ADDR, p->mem.size);
+ wl1271_raw_write32(wl, HW_PART1_START_ADDR, p->reg.start);
+ wl1271_raw_write32(wl, HW_PART1_SIZE_ADDR, p->reg.size);
+ wl1271_raw_write32(wl, HW_PART2_START_ADDR, p->mem2.start);
+ wl1271_raw_write32(wl, HW_PART2_SIZE_ADDR, p->mem2.size);
+ /*
+ * We don't need the size of the last partition, as it is
+ * automatically calculated based on the total memory size and
+ * the sizes of the previous partitions.
+ */
+ wl1271_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start);
+}
+EXPORT_SYMBOL_GPL(wlcore_set_partition);
+
+void wlcore_select_partition(struct wl1271 *wl, u8 part)
+{
+ wl1271_debug(DEBUG_IO, "setting partition %d", part);
+
+ wlcore_set_partition(wl, &wl->ptable[part]);
+}
+EXPORT_SYMBOL_GPL(wlcore_select_partition);
+
+void wl1271_io_reset(struct wl1271 *wl)
+{
+ if (wl->if_ops->reset)
+ wl->if_ops->reset(wl->dev);
+}
+
+void wl1271_io_init(struct wl1271 *wl)
+{
+ if (wl->if_ops->init)
+ wl->if_ops->init(wl->dev);
+}
diff --git a/drivers/net/wireless/wl12xx/io.h b/drivers/net/wireless/ti/wlcore/io.h
similarity index 70%
rename from drivers/net/wireless/wl12xx/io.h
rename to drivers/net/wireless/ti/wlcore/io.h
index 4fb3dab..8942954 100644
--- a/drivers/net/wireless/wl12xx/io.h
+++ b/drivers/net/wireless/ti/wlcore/io.h
@@ -26,7 +26,6 @@
#define __IO_H__
#include <linux/irqreturn.h>
-#include "reg.h"
#define HW_ACCESS_MEMORY_MAX_RANGE 0x1FFC0
@@ -43,15 +42,14 @@
#define HW_ACCESS_PRAM_MAX_RANGE 0x3c000
-extern struct wl1271_partition_set wl12xx_part_table[PART_TABLE_LEN];
-
struct wl1271;
-void wl1271_disable_interrupts(struct wl1271 *wl);
-void wl1271_enable_interrupts(struct wl1271 *wl);
+void wlcore_disable_interrupts(struct wl1271 *wl);
+void wlcore_enable_interrupts(struct wl1271 *wl);
void wl1271_io_reset(struct wl1271 *wl);
void wl1271_io_init(struct wl1271 *wl);
+int wlcore_translate_addr(struct wl1271 *wl, int addr);
/* Raw target IO, address is not translated */
static inline void wl1271_raw_write(struct wl1271 *wl, int addr, void *buf,
@@ -66,6 +64,18 @@
wl->if_ops->read(wl->dev, addr, buf, len, fixed);
}
+static inline void wlcore_raw_read_data(struct wl1271 *wl, int reg, void *buf,
+ size_t len, bool fixed)
+{
+ wl1271_raw_read(wl, wl->rtable[reg], buf, len, fixed);
+}
+
+static inline void wlcore_raw_write_data(struct wl1271 *wl, int reg, void *buf,
+ size_t len, bool fixed)
+{
+ wl1271_raw_write(wl, wl->rtable[reg], buf, len, fixed);
+}
+
static inline u32 wl1271_raw_read32(struct wl1271 *wl, int addr)
{
wl1271_raw_read(wl, addr, &wl->buffer_32,
@@ -81,36 +91,12 @@
sizeof(wl->buffer_32), false);
}
-/* Translated target IO */
-static inline int wl1271_translate_addr(struct wl1271 *wl, int addr)
-{
- /*
- * To translate, first check to which window of addresses the
- * particular address belongs. Then subtract the starting address
- * of that window from the address. Then, add offset of the
- * translated region.
- *
- * The translated regions occur next to each other in physical device
- * memory, so just add the sizes of the preceding address regions to
- * get the offset to the new region.
- *
- * Currently, only the two first regions are addressed, and the
- * assumption is that all addresses will fall into either of those
- * two.
- */
- if ((addr >= wl->part.reg.start) &&
- (addr < wl->part.reg.start + wl->part.reg.size))
- return addr - wl->part.reg.start + wl->part.mem.size;
- else
- return addr - wl->part.mem.start;
-}
-
static inline void wl1271_read(struct wl1271 *wl, int addr, void *buf,
size_t len, bool fixed)
{
int physical;
- physical = wl1271_translate_addr(wl, addr);
+ physical = wlcore_translate_addr(wl, addr);
wl1271_raw_read(wl, physical, buf, len, fixed);
}
@@ -120,11 +106,23 @@
{
int physical;
- physical = wl1271_translate_addr(wl, addr);
+ physical = wlcore_translate_addr(wl, addr);
wl1271_raw_write(wl, physical, buf, len, fixed);
}
+static inline void wlcore_write_data(struct wl1271 *wl, int reg, void *buf,
+ size_t len, bool fixed)
+{
+ wl1271_write(wl, wl->rtable[reg], buf, len, fixed);
+}
+
+static inline void wlcore_read_data(struct wl1271 *wl, int reg, void *buf,
+ size_t len, bool fixed)
+{
+ wl1271_read(wl, wl->rtable[reg], buf, len, fixed);
+}
+
static inline void wl1271_read_hwaddr(struct wl1271 *wl, int hwaddr,
void *buf, size_t len, bool fixed)
{
@@ -134,19 +132,30 @@
/* Addresses are stored internally as addresses to 32 bytes blocks */
addr = hwaddr << 5;
- physical = wl1271_translate_addr(wl, addr);
+ physical = wlcore_translate_addr(wl, addr);
wl1271_raw_read(wl, physical, buf, len, fixed);
}
static inline u32 wl1271_read32(struct wl1271 *wl, int addr)
{
- return wl1271_raw_read32(wl, wl1271_translate_addr(wl, addr));
+ return wl1271_raw_read32(wl, wlcore_translate_addr(wl, addr));
}
static inline void wl1271_write32(struct wl1271 *wl, int addr, u32 val)
{
- wl1271_raw_write32(wl, wl1271_translate_addr(wl, addr), val);
+ wl1271_raw_write32(wl, wlcore_translate_addr(wl, addr), val);
+}
+
+static inline u32 wlcore_read_reg(struct wl1271 *wl, int reg)
+{
+ return wl1271_raw_read32(wl,
+ wlcore_translate_addr(wl, wl->rtable[reg]));
+}
+
+static inline void wlcore_write_reg(struct wl1271 *wl, int reg, u32 val)
+{
+ wl1271_raw_write32(wl, wlcore_translate_addr(wl, wl->rtable[reg]), val);
}
static inline void wl1271_power_off(struct wl1271 *wl)
@@ -164,13 +173,8 @@
return ret;
}
-
-/* Top Register IO */
-void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val);
-u16 wl1271_top_reg_read(struct wl1271 *wl, int addr);
-
-int wl1271_set_partition(struct wl1271 *wl,
- struct wl1271_partition_set *p);
+void wlcore_set_partition(struct wl1271 *wl,
+ const struct wlcore_partition_set *p);
bool wl1271_set_block_size(struct wl1271 *wl);
@@ -178,4 +182,6 @@
int wl1271_tx_dummy_packet(struct wl1271 *wl);
+void wlcore_select_partition(struct wl1271 *wl, u8 part);
+
#endif
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/ti/wlcore/main.c
similarity index 85%
rename from drivers/net/wireless/wl12xx/main.c
rename to drivers/net/wireless/ti/wlcore/main.c
index 362ff1a..2b0f987 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -35,10 +35,9 @@
#include <linux/sched.h>
#include <linux/interrupt.h>
-#include "wl12xx.h"
+#include "wlcore.h"
#include "debug.h"
#include "wl12xx_80211.h"
-#include "reg.h"
#include "io.h"
#include "event.h"
#include "tx.h"
@@ -50,342 +49,15 @@
#include "boot.h"
#include "testmode.h"
#include "scan.h"
+#include "hw_ops.h"
#define WL1271_BOOT_RETRIES 3
-static struct conf_drv_settings default_conf = {
- .sg = {
- .params = {
- [CONF_SG_ACL_BT_MASTER_MIN_BR] = 10,
- [CONF_SG_ACL_BT_MASTER_MAX_BR] = 180,
- [CONF_SG_ACL_BT_SLAVE_MIN_BR] = 10,
- [CONF_SG_ACL_BT_SLAVE_MAX_BR] = 180,
- [CONF_SG_ACL_BT_MASTER_MIN_EDR] = 10,
- [CONF_SG_ACL_BT_MASTER_MAX_EDR] = 80,
- [CONF_SG_ACL_BT_SLAVE_MIN_EDR] = 10,
- [CONF_SG_ACL_BT_SLAVE_MAX_EDR] = 80,
- [CONF_SG_ACL_WLAN_PS_MASTER_BR] = 8,
- [CONF_SG_ACL_WLAN_PS_SLAVE_BR] = 8,
- [CONF_SG_ACL_WLAN_PS_MASTER_EDR] = 20,
- [CONF_SG_ACL_WLAN_PS_SLAVE_EDR] = 20,
- [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR] = 20,
- [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR] = 35,
- [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR] = 16,
- [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR] = 35,
- [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR] = 32,
- [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR] = 50,
- [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR] = 28,
- [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR] = 50,
- [CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR] = 10,
- [CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR] = 20,
- [CONF_SG_ACL_PASSIVE_SCAN_BT_BR] = 75,
- [CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR] = 15,
- [CONF_SG_ACL_PASSIVE_SCAN_BT_EDR] = 27,
- [CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR] = 17,
- /* active scan params */
- [CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
- [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
- [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100,
- /* passive scan params */
- [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR] = 800,
- [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR] = 200,
- [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200,
- /* passive scan in dual antenna params */
- [CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN] = 0,
- [CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN] = 0,
- [CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN] = 0,
- /* general params */
- [CONF_SG_STA_FORCE_PS_IN_BT_SCO] = 1,
- [CONF_SG_ANTENNA_CONFIGURATION] = 0,
- [CONF_SG_BEACON_MISS_PERCENT] = 60,
- [CONF_SG_DHCP_TIME] = 5000,
- [CONF_SG_RXT] = 1200,
- [CONF_SG_TXT] = 1000,
- [CONF_SG_ADAPTIVE_RXT_TXT] = 1,
- [CONF_SG_GENERAL_USAGE_BIT_MAP] = 3,
- [CONF_SG_HV3_MAX_SERVED] = 6,
- [CONF_SG_PS_POLL_TIMEOUT] = 10,
- [CONF_SG_UPSD_TIMEOUT] = 10,
- [CONF_SG_CONSECUTIVE_CTS_THRESHOLD] = 2,
- [CONF_SG_STA_RX_WINDOW_AFTER_DTIM] = 5,
- [CONF_SG_STA_CONNECTION_PROTECTION_TIME] = 30,
- /* AP params */
- [CONF_AP_BEACON_MISS_TX] = 3,
- [CONF_AP_RX_WINDOW_AFTER_BEACON] = 10,
- [CONF_AP_BEACON_WINDOW_INTERVAL] = 2,
- [CONF_AP_CONNECTION_PROTECTION_TIME] = 0,
- [CONF_AP_BT_ACL_VAL_BT_SERVE_TIME] = 25,
- [CONF_AP_BT_ACL_VAL_WL_SERVE_TIME] = 25,
- /* CTS Diluting params */
- [CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH] = 0,
- [CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER] = 0,
- },
- .state = CONF_SG_PROTECTIVE,
- },
- .rx = {
- .rx_msdu_life_time = 512000,
- .packet_detection_threshold = 0,
- .ps_poll_timeout = 15,
- .upsd_timeout = 15,
- .rts_threshold = IEEE80211_MAX_RTS_THRESHOLD,
- .rx_cca_threshold = 0,
- .irq_blk_threshold = 0xFFFF,
- .irq_pkt_threshold = 0,
- .irq_timeout = 600,
- .queue_type = CONF_RX_QUEUE_TYPE_LOW_PRIORITY,
- },
- .tx = {
- .tx_energy_detection = 0,
- .sta_rc_conf = {
- .enabled_rates = 0,
- .short_retry_limit = 10,
- .long_retry_limit = 10,
- .aflags = 0,
- },
- .ac_conf_count = 4,
- .ac_conf = {
- [CONF_TX_AC_BE] = {
- .ac = CONF_TX_AC_BE,
- .cw_min = 15,
- .cw_max = 63,
- .aifsn = 3,
- .tx_op_limit = 0,
- },
- [CONF_TX_AC_BK] = {
- .ac = CONF_TX_AC_BK,
- .cw_min = 15,
- .cw_max = 63,
- .aifsn = 7,
- .tx_op_limit = 0,
- },
- [CONF_TX_AC_VI] = {
- .ac = CONF_TX_AC_VI,
- .cw_min = 15,
- .cw_max = 63,
- .aifsn = CONF_TX_AIFS_PIFS,
- .tx_op_limit = 3008,
- },
- [CONF_TX_AC_VO] = {
- .ac = CONF_TX_AC_VO,
- .cw_min = 15,
- .cw_max = 63,
- .aifsn = CONF_TX_AIFS_PIFS,
- .tx_op_limit = 1504,
- },
- },
- .max_tx_retries = 100,
- .ap_aging_period = 300,
- .tid_conf_count = 4,
- .tid_conf = {
- [CONF_TX_AC_BE] = {
- .queue_id = CONF_TX_AC_BE,
- .channel_type = CONF_CHANNEL_TYPE_EDCF,
- .tsid = CONF_TX_AC_BE,
- .ps_scheme = CONF_PS_SCHEME_LEGACY,
- .ack_policy = CONF_ACK_POLICY_LEGACY,
- .apsd_conf = {0, 0},
- },
- [CONF_TX_AC_BK] = {
- .queue_id = CONF_TX_AC_BK,
- .channel_type = CONF_CHANNEL_TYPE_EDCF,
- .tsid = CONF_TX_AC_BK,
- .ps_scheme = CONF_PS_SCHEME_LEGACY,
- .ack_policy = CONF_ACK_POLICY_LEGACY,
- .apsd_conf = {0, 0},
- },
- [CONF_TX_AC_VI] = {
- .queue_id = CONF_TX_AC_VI,
- .channel_type = CONF_CHANNEL_TYPE_EDCF,
- .tsid = CONF_TX_AC_VI,
- .ps_scheme = CONF_PS_SCHEME_LEGACY,
- .ack_policy = CONF_ACK_POLICY_LEGACY,
- .apsd_conf = {0, 0},
- },
- [CONF_TX_AC_VO] = {
- .queue_id = CONF_TX_AC_VO,
- .channel_type = CONF_CHANNEL_TYPE_EDCF,
- .tsid = CONF_TX_AC_VO,
- .ps_scheme = CONF_PS_SCHEME_LEGACY,
- .ack_policy = CONF_ACK_POLICY_LEGACY,
- .apsd_conf = {0, 0},
- },
- },
- .frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD,
- .tx_compl_timeout = 700,
- .tx_compl_threshold = 4,
- .basic_rate = CONF_HW_BIT_RATE_1MBPS,
- .basic_rate_5 = CONF_HW_BIT_RATE_6MBPS,
- .tmpl_short_retry_limit = 10,
- .tmpl_long_retry_limit = 10,
- .tx_watchdog_timeout = 5000,
- },
- .conn = {
- .wake_up_event = CONF_WAKE_UP_EVENT_DTIM,
- .listen_interval = 1,
- .suspend_wake_up_event = CONF_WAKE_UP_EVENT_N_DTIM,
- .suspend_listen_interval = 3,
- .bcn_filt_mode = CONF_BCN_FILT_MODE_ENABLED,
- .bcn_filt_ie_count = 2,
- .bcn_filt_ie = {
- [0] = {
- .ie = WLAN_EID_CHANNEL_SWITCH,
- .rule = CONF_BCN_RULE_PASS_ON_APPEARANCE,
- },
- [1] = {
- .ie = WLAN_EID_HT_OPERATION,
- .rule = CONF_BCN_RULE_PASS_ON_CHANGE,
- },
- },
- .synch_fail_thold = 10,
- .bss_lose_timeout = 100,
- .beacon_rx_timeout = 10000,
- .broadcast_timeout = 20000,
- .rx_broadcast_in_ps = 1,
- .ps_poll_threshold = 10,
- .bet_enable = CONF_BET_MODE_ENABLE,
- .bet_max_consecutive = 50,
- .psm_entry_retries = 8,
- .psm_exit_retries = 16,
- .psm_entry_nullfunc_retries = 3,
- .dynamic_ps_timeout = 200,
- .forced_ps = false,
- .keep_alive_interval = 55000,
- .max_listen_interval = 20,
- },
- .itrim = {
- .enable = false,
- .timeout = 50000,
- },
- .pm_config = {
- .host_clk_settling_time = 5000,
- .host_fast_wakeup_support = false
- },
- .roam_trigger = {
- .trigger_pacing = 1,
- .avg_weight_rssi_beacon = 20,
- .avg_weight_rssi_data = 10,
- .avg_weight_snr_beacon = 20,
- .avg_weight_snr_data = 10,
- },
- .scan = {
- .min_dwell_time_active = 7500,
- .max_dwell_time_active = 30000,
- .min_dwell_time_passive = 100000,
- .max_dwell_time_passive = 100000,
- .num_probe_reqs = 2,
- .split_scan_timeout = 50000,
- },
- .sched_scan = {
- /* sched_scan requires dwell times in TU instead of TU/1000 */
- .min_dwell_time_active = 30,
- .max_dwell_time_active = 60,
- .dwell_time_passive = 100,
- .dwell_time_dfs = 150,
- .num_probe_reqs = 2,
- .rssi_threshold = -90,
- .snr_threshold = 0,
- },
- .rf = {
- .tx_per_channel_power_compensation_2 = {
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- },
- .tx_per_channel_power_compensation_5 = {
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- },
- },
- .ht = {
- .rx_ba_win_size = 8,
- .tx_ba_win_size = 64,
- .inactivity_timeout = 10000,
- .tx_ba_tid_bitmap = CONF_TX_BA_ENABLED_TID_BITMAP,
- },
- .mem_wl127x = {
- .num_stations = 1,
- .ssid_profiles = 1,
- .rx_block_num = 70,
- .tx_min_block_num = 40,
- .dynamic_memory = 1,
- .min_req_tx_blocks = 100,
- .min_req_rx_blocks = 22,
- .tx_min = 27,
- },
- .mem_wl128x = {
- .num_stations = 1,
- .ssid_profiles = 1,
- .rx_block_num = 40,
- .tx_min_block_num = 40,
- .dynamic_memory = 1,
- .min_req_tx_blocks = 45,
- .min_req_rx_blocks = 22,
- .tx_min = 27,
- },
- .fm_coex = {
- .enable = true,
- .swallow_period = 5,
- .n_divider_fref_set_1 = 0xff, /* default */
- .n_divider_fref_set_2 = 12,
- .m_divider_fref_set_1 = 148,
- .m_divider_fref_set_2 = 0xffff, /* default */
- .coex_pll_stabilization_time = 0xffffffff, /* default */
- .ldo_stabilization_time = 0xffff, /* default */
- .fm_disturbed_band_margin = 0xff, /* default */
- .swallow_clk_diff = 0xff, /* default */
- },
- .rx_streaming = {
- .duration = 150,
- .queues = 0x1,
- .interval = 20,
- .always = 0,
- },
- .fwlog = {
- .mode = WL12XX_FWLOG_ON_DEMAND,
- .mem_blocks = 2,
- .severity = 0,
- .timestamp = WL12XX_FWLOG_TIMESTAMP_DISABLED,
- .output = WL12XX_FWLOG_OUTPUT_HOST,
- .threshold = 0,
- },
- .hci_io_ds = HCI_IO_DS_6MA,
- .rate = {
- .rate_retry_score = 32000,
- .per_add = 8192,
- .per_th1 = 2048,
- .per_th2 = 4096,
- .max_per = 8100,
- .inverse_curiosity_factor = 5,
- .tx_fail_low_th = 4,
- .tx_fail_high_th = 10,
- .per_alpha_shift = 4,
- .per_add_shift = 13,
- .per_beta1_shift = 10,
- .per_beta2_shift = 8,
- .rate_check_up = 2,
- .rate_check_down = 12,
- .rate_retry_policy = {
- 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00,
- },
- },
- .hangover = {
- .recover_time = 0,
- .hangover_period = 20,
- .dynamic_mode = 1,
- .early_termination_mode = 1,
- .max_period = 20,
- .min_period = 1,
- .increase_delta = 1,
- .decrease_delta = 2,
- .quiet_time = 4,
- .increase_time = 1,
- .window_size = 16,
- },
-};
+#define WL1271_BOOT_RETRIES 3
static char *fwlog_param;
static bool bug_on_recovery;
+static bool no_recovery;
static void __wl1271_op_remove_interface(struct wl1271 *wl,
struct ieee80211_vif *vif,
@@ -628,22 +300,8 @@
mutex_unlock(&wl->mutex);
}
-static void wl1271_conf_init(struct wl1271 *wl)
+static void wlcore_adjust_conf(struct wl1271 *wl)
{
-
- /*
- * This function applies the default configuration to the driver. This
- * function is invoked upon driver load (spi probe.)
- *
- * The configuration is stored in a run-time structure in order to
- * facilitate for run-time adjustment of any of the parameters. Making
- * changes to the configuration structure will apply the new values on
- * the next interface up (wl1271_op_start.)
- */
-
- /* apply driver default configuration */
- memcpy(&wl->conf, &default_conf, sizeof(default_conf));
-
/* Adjust settings according to optional module parameters */
if (fwlog_param) {
if (!strcmp(fwlog_param, "continuous")) {
@@ -666,28 +324,7 @@
{
int ret;
- if (wl->chip.id == CHIP_ID_1283_PG20)
- ret = wl128x_cmd_general_parms(wl);
- else
- ret = wl1271_cmd_general_parms(wl);
- if (ret < 0)
- return ret;
-
- if (wl->chip.id == CHIP_ID_1283_PG20)
- ret = wl128x_cmd_radio_parms(wl);
- else
- ret = wl1271_cmd_radio_parms(wl);
- if (ret < 0)
- return ret;
-
- if (wl->chip.id != CHIP_ID_1283_PG20) {
- ret = wl1271_cmd_ext_radio_parms(wl);
- if (ret < 0)
- return ret;
- }
-
- /* Chip-specific initializations */
- ret = wl1271_chip_specific_init(wl);
+ ret = wl->ops->hw_init(wl);
if (ret < 0)
return ret;
@@ -750,7 +387,7 @@
static void wl12xx_irq_update_links_status(struct wl1271 *wl,
struct wl12xx_vif *wlvif,
- struct wl12xx_fw_status *status)
+ struct wl_fw_status *status)
{
struct wl1271_link *lnk;
u32 cur_fw_ps_map;
@@ -770,9 +407,10 @@
for_each_set_bit(hlid, wlvif->ap.sta_hlid_map, WL12XX_MAX_LINKS) {
lnk = &wl->links[hlid];
- cnt = status->tx_lnk_free_pkts[hlid] - lnk->prev_freed_pkts;
+ cnt = status->counters.tx_lnk_free_pkts[hlid] -
+ lnk->prev_freed_pkts;
- lnk->prev_freed_pkts = status->tx_lnk_free_pkts[hlid];
+ lnk->prev_freed_pkts = status->counters.tx_lnk_free_pkts[hlid];
lnk->allocated_pkts -= cnt;
wl12xx_irq_ps_regulate_link(wl, wlvif, hlid,
@@ -781,15 +419,19 @@
}
static void wl12xx_fw_status(struct wl1271 *wl,
- struct wl12xx_fw_status *status)
+ struct wl_fw_status *status)
{
struct wl12xx_vif *wlvif;
struct timespec ts;
u32 old_tx_blk_count = wl->tx_blocks_available;
int avail, freed_blocks;
int i;
+ size_t status_len;
- wl1271_raw_read(wl, FW_STATUS_ADDR, status, sizeof(*status), false);
+ status_len = sizeof(*status) + wl->fw_status_priv_len;
+
+ wlcore_raw_read_data(wl, REG_RAW_FW_STATUS_ADDR, status,
+ status_len, false);
wl1271_debug(DEBUG_IRQ, "intr: 0x%x (fw_rx_counter = %d, "
"drv_rx_counter = %d, tx_results_counter = %d)",
@@ -801,10 +443,10 @@
for (i = 0; i < NUM_TX_QUEUES; i++) {
/* prevent wrap-around in freed-packets counter */
wl->tx_allocated_pkts[i] -=
- (status->tx_released_pkts[i] -
+ (status->counters.tx_released_pkts[i] -
wl->tx_pkts_freed[i]) & 0xff;
- wl->tx_pkts_freed[i] = status->tx_released_pkts[i];
+ wl->tx_pkts_freed[i] = status->counters.tx_released_pkts[i];
}
/* prevent wrap-around in total blocks counter */
@@ -927,6 +569,9 @@
smp_mb__after_clear_bit();
wl12xx_fw_status(wl, wl->fw_status);
+
+ wlcore_hw_tx_immediate_compl(wl);
+
intr = le32_to_cpu(wl->fw_status->intr);
intr &= WL1271_INTR_MASK;
if (!intr) {
@@ -963,9 +608,7 @@
}
/* check for tx results */
- if (wl->fw_status->tx_results_counter !=
- (wl->tx_results_count & 0xff))
- wl1271_tx_complete(wl);
+ wlcore_hw_tx_delayed_compl(wl);
/* Make sure the deferred queues don't get too long */
defer_count = skb_queue_len(&wl->deferred_tx_queue) +
@@ -1046,10 +689,7 @@
if (plt) {
fw_type = WL12XX_FW_TYPE_PLT;
- if (wl->chip.id == CHIP_ID_1283_PG20)
- fw_name = WL128X_PLT_FW_NAME;
- else
- fw_name = WL127X_PLT_FW_NAME;
+ fw_name = wl->plt_fw_name;
} else {
/*
* we can't call wl12xx_get_vif_count() here because
@@ -1057,16 +697,10 @@
*/
if (wl->last_vif_count > 1) {
fw_type = WL12XX_FW_TYPE_MULTI;
- if (wl->chip.id == CHIP_ID_1283_PG20)
- fw_name = WL128X_FW_NAME_MULTI;
- else
- fw_name = WL127X_FW_NAME_MULTI;
+ fw_name = wl->mr_fw_name;
} else {
fw_type = WL12XX_FW_TYPE_NORMAL;
- if (wl->chip.id == CHIP_ID_1283_PG20)
- fw_name = WL128X_FW_NAME_SINGLE;
- else
- fw_name = WL127X_FW_NAME_SINGLE;
+ fw_name = wl->sr_fw_name;
}
}
@@ -1173,7 +807,7 @@
u32 first_addr;
u8 *block;
- if ((wl->quirks & WL12XX_QUIRK_FWLOG_NOT_IMPLEMENTED) ||
+ if ((wl->quirks & WLCORE_QUIRK_FWLOG_NOT_IMPLEMENTED) ||
(wl->conf.fwlog.mode != WL12XX_FWLOG_ON_DEMAND) ||
(wl->conf.fwlog.mem_blocks == 0))
return;
@@ -1239,11 +873,20 @@
wl12xx_read_fwlog_panic(wl);
wl1271_info("Hardware recovery in progress. FW ver: %s pc: 0x%x",
- wl->chip.fw_ver_str, wl1271_read32(wl, SCR_PAD4));
+ wl->chip.fw_ver_str,
+ wlcore_read_reg(wl, REG_PC_ON_RECOVERY));
BUG_ON(bug_on_recovery &&
!test_bit(WL1271_FLAG_INTENDED_FW_RECOVERY, &wl->flags));
+ if (no_recovery) {
+ wl1271_info("No recovery (chosen on module load). Fw will remain stuck.");
+ clear_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, &wl->flags);
+ goto out_unlock;
+ }
+
+ BUG_ON(bug_on_recovery);
+
/*
* Advance security sequence number to overcome potential progress
* in the firmware during recovery. This doens't hurt if the network is
@@ -1290,10 +933,7 @@
static void wl1271_fw_wakeup(struct wl1271 *wl)
{
- u32 elp_reg;
-
- elp_reg = ELPCTRL_WAKE_UP;
- wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
+ wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG, ELPCTRL_WAKE_UP);
}
static int wl1271_setup(struct wl1271 *wl)
@@ -1323,7 +963,7 @@
wl1271_io_reset(wl);
wl1271_io_init(wl);
- wl1271_set_partition(wl, &wl12xx_part_table[PART_DOWN]);
+ wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
/* ELP module wake up */
wl1271_fw_wakeup(wl);
@@ -1348,44 +988,18 @@
* negligible, we use the same block size for all different
* chip types.
*/
- if (!wl1271_set_block_size(wl))
- wl->quirks |= WL12XX_QUIRK_NO_BLOCKSIZE_ALIGNMENT;
+ if (wl1271_set_block_size(wl))
+ wl->quirks |= WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN;
- switch (wl->chip.id) {
- case CHIP_ID_1271_PG10:
- wl1271_warning("chip id 0x%x (1271 PG10) support is obsolete",
- wl->chip.id);
-
- ret = wl1271_setup(wl);
- if (ret < 0)
- goto out;
- wl->quirks |= WL12XX_QUIRK_NO_BLOCKSIZE_ALIGNMENT;
- break;
-
- case CHIP_ID_1271_PG20:
- wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)",
- wl->chip.id);
-
- ret = wl1271_setup(wl);
- if (ret < 0)
- goto out;
- wl->quirks |= WL12XX_QUIRK_NO_BLOCKSIZE_ALIGNMENT;
- break;
-
- case CHIP_ID_1283_PG20:
- wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1283 PG20)",
- wl->chip.id);
-
- ret = wl1271_setup(wl);
- if (ret < 0)
- goto out;
- break;
- case CHIP_ID_1283_PG10:
- default:
- wl1271_warning("unsupported chip id: 0x%x", wl->chip.id);
- ret = -ENODEV;
+ ret = wl->ops->identify_chip(wl);
+ if (ret < 0)
goto out;
- }
+
+ /* TODO: make sure the lower driver has set things up correctly */
+
+ ret = wl1271_setup(wl);
+ if (ret < 0)
+ goto out;
ret = wl12xx_fetch_firmware(wl, plt);
if (ret < 0)
@@ -1425,7 +1039,7 @@
if (ret < 0)
goto power_off;
- ret = wl1271_boot(wl);
+ ret = wl->ops->boot(wl);
if (ret < 0)
goto power_off;
@@ -1454,7 +1068,7 @@
work function will not do anything.) Also, any other
possible concurrent operations will fail due to the
current state, hence the wl1271 struct should be safe. */
- wl1271_disable_interrupts(wl);
+ wlcore_disable_interrupts(wl);
wl1271_flush_deferred_work(wl);
cancel_work_sync(&wl->netstack_work);
mutex_lock(&wl->mutex);
@@ -1481,7 +1095,7 @@
* Otherwise, the interrupt handler might be called and exit without
* reading the interrupt status.
*/
- wl1271_disable_interrupts(wl);
+ wlcore_disable_interrupts(wl);
mutex_lock(&wl->mutex);
if (!wl->plt) {
mutex_unlock(&wl->mutex);
@@ -1491,7 +1105,7 @@
* may have been disabled when op_stop was called. It will,
* however, balance the above call to disable_interrupts().
*/
- wl1271_enable_interrupts(wl);
+ wlcore_enable_interrupts(wl);
wl1271_error("cannot power down because not in PLT "
"state: %d", wl->state);
@@ -1652,14 +1266,12 @@
{
int ret = 0;
- mutex_lock(&wl->mutex);
-
if (!test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags))
- goto out_unlock;
+ goto out;
ret = wl1271_ps_elp_wakeup(wl);
if (ret < 0)
- goto out_unlock;
+ goto out;
ret = wl1271_acx_wake_up_conditions(wl, wlvif,
wl->conf.conn.suspend_wake_up_event,
@@ -1668,11 +1280,9 @@
if (ret < 0)
wl1271_error("suspend: set wake up conditions failed: %d", ret);
-
wl1271_ps_elp_sleep(wl);
-out_unlock:
- mutex_unlock(&wl->mutex);
+out:
return ret;
}
@@ -1682,20 +1292,17 @@
{
int ret = 0;
- mutex_lock(&wl->mutex);
-
if (!test_bit(WLVIF_FLAG_AP_STARTED, &wlvif->flags))
- goto out_unlock;
+ goto out;
ret = wl1271_ps_elp_wakeup(wl);
if (ret < 0)
- goto out_unlock;
+ goto out;
ret = wl1271_acx_beacon_filter_opt(wl, wlvif, true);
wl1271_ps_elp_sleep(wl);
-out_unlock:
- mutex_unlock(&wl->mutex);
+out:
return ret;
}
@@ -1720,10 +1327,9 @@
if ((!is_ap) && (!is_sta))
return;
- mutex_lock(&wl->mutex);
ret = wl1271_ps_elp_wakeup(wl);
if (ret < 0)
- goto out;
+ return;
if (is_sta) {
ret = wl1271_acx_wake_up_conditions(wl, wlvif,
@@ -1739,8 +1345,6 @@
}
wl1271_ps_elp_sleep(wl);
-out:
- mutex_unlock(&wl->mutex);
}
static int wl1271_op_suspend(struct ieee80211_hw *hw,
@@ -1755,6 +1359,7 @@
wl1271_tx_flush(wl);
+ mutex_lock(&wl->mutex);
wl->wow_enabled = true;
wl12xx_for_each_wlvif(wl, wlvif) {
ret = wl1271_configure_suspend(wl, wlvif);
@@ -1763,6 +1368,7 @@
return ret;
}
}
+ mutex_unlock(&wl->mutex);
/* flush any remaining work */
wl1271_debug(DEBUG_MAC80211, "flushing remaining works");
@@ -1770,7 +1376,7 @@
* disable and re-enable interrupts in order to flush
* the threaded_irq
*/
- wl1271_disable_interrupts(wl);
+ wlcore_disable_interrupts(wl);
/*
* set suspended flag to avoid triggering a new threaded_irq
@@ -1778,7 +1384,7 @@
*/
set_bit(WL1271_FLAG_SUSPENDED, &wl->flags);
- wl1271_enable_interrupts(wl);
+ wlcore_enable_interrupts(wl);
flush_work(&wl->tx_work);
flush_delayed_work(&wl->elp_work);
@@ -1810,12 +1416,15 @@
wl1271_debug(DEBUG_MAC80211,
"run postponed irq_work directly");
wl1271_irq(0, wl);
- wl1271_enable_interrupts(wl);
+ wlcore_enable_interrupts(wl);
}
+
+ mutex_lock(&wl->mutex);
wl12xx_for_each_wlvif(wl, wlvif) {
wl1271_configure_resume(wl, wlvif);
}
wl->wow_enabled = false;
+ mutex_unlock(&wl->mutex);
return 0;
}
@@ -1851,7 +1460,7 @@
* Otherwise, the interrupt handler might be called and exit without
* reading the interrupt status.
*/
- wl1271_disable_interrupts(wl);
+ wlcore_disable_interrupts(wl);
mutex_lock(&wl->mutex);
if (wl->state == WL1271_STATE_OFF) {
mutex_unlock(&wl->mutex);
@@ -1861,7 +1470,7 @@
* may have been disabled when op_stop was called. It will,
* however, balance the above call to disable_interrupts().
*/
- wl1271_enable_interrupts(wl);
+ wlcore_enable_interrupts(wl);
return;
}
@@ -1894,7 +1503,6 @@
wl->tx_results_count = 0;
wl->tx_packets_count = 0;
wl->time_offset = 0;
- wl->tx_spare_blocks = TX_HW_BLOCK_SPARE_DEFAULT;
wl->ap_fw_ps_map = 0;
wl->ap_ps_map = 0;
wl->sched_scanning = false;
@@ -2067,7 +1675,7 @@
if (ret < 0)
goto power_off;
- ret = wl1271_boot(wl);
+ ret = wl->ops->boot(wl);
if (ret < 0)
goto power_off;
@@ -2087,7 +1695,7 @@
work function will not do anything.) Also, any other
possible concurrent operations will fail due to the
current state, hence the wl1271 struct should be safe. */
- wl1271_disable_interrupts(wl);
+ wlcore_disable_interrupts(wl);
wl1271_flush_deferred_work(wl);
cancel_work_sync(&wl->netstack_work);
mutex_lock(&wl->mutex);
@@ -2360,10 +1968,12 @@
for (i = 0; i < CONF_TX_MAX_AC_COUNT; i++)
wl12xx_free_rate_policy(wl,
&wlvif->ap.ucast_rate_idx[i]);
+ wl1271_free_ap_keys(wl, wlvif);
}
+ dev_kfree_skb(wlvif->probereq);
+ wlvif->probereq = NULL;
wl12xx_tx_reset_wlvif(wl, wlvif);
- wl1271_free_ap_keys(wl, wlvif);
if (wl->last_wlvif == wlvif)
wl->last_wlvif = NULL;
list_del(&wlvif->list);
@@ -2946,6 +2556,17 @@
int ret;
bool is_ap = (wlvif->bss_type == BSS_TYPE_AP_BSS);
+ /*
+ * A role set to GEM cipher requires different Tx settings (namely
+ * spare blocks). Note when we are in this mode so the HW can adjust.
+ */
+ if (key_type == KEY_GEM) {
+ if (action == KEY_ADD_OR_REPLACE)
+ wlvif->is_gem = true;
+ else if (action == KEY_REMOVE)
+ wlvif->is_gem = false;
+ }
+
if (is_ap) {
struct wl1271_station *wl_sta;
u8 hlid;
@@ -2984,17 +2605,6 @@
0xff, 0xff, 0xff, 0xff, 0xff, 0xff
};
- /*
- * A STA set to GEM cipher requires 2 tx spare blocks.
- * Return to default value when GEM cipher key is removed
- */
- if (key_type == KEY_GEM) {
- if (action == KEY_ADD_OR_REPLACE)
- wl->tx_spare_blocks = 2;
- else if (action == KEY_REMOVE)
- wl->tx_spare_blocks = TX_HW_BLOCK_SPARE_DEFAULT;
- }
-
addr = sta ? sta->addr : bcast_addr;
if (is_zero_ether_addr(addr)) {
@@ -3791,8 +3401,7 @@
wlvif->rssi_thold = bss_conf->cqm_rssi_thold;
}
- if (changed & BSS_CHANGED_BSSID &&
- (is_ibss || bss_conf->assoc))
+ if (changed & BSS_CHANGED_BSSID)
if (!is_zero_ether_addr(bss_conf->bssid)) {
ret = wl12xx_cmd_build_null_data(wl, wlvif);
if (ret < 0)
@@ -3801,9 +3410,6 @@
ret = wl1271_build_qos_null_data(wl, vif);
if (ret < 0)
goto out;
-
- /* Need to update the BSSID (for filtering etc) */
- do_join = true;
}
if (changed & (BSS_CHANGED_ASSOC | BSS_CHANGED_HT)) {
@@ -3830,6 +3436,7 @@
int ieoffset;
wlvif->aid = bss_conf->aid;
wlvif->beacon_int = bss_conf->beacon_int;
+ do_join = true;
set_assoc = true;
/*
@@ -4662,60 +4269,12 @@
{ .hw_value = 14, .center_freq = 2484, .max_power = 25 },
};
-/* mapping to indexes for wl1271_rates */
-static const u8 wl1271_rate_to_idx_2ghz[] = {
- /* MCS rates are used only with 11n */
- 7, /* CONF_HW_RXTX_RATE_MCS7_SGI */
- 7, /* CONF_HW_RXTX_RATE_MCS7 */
- 6, /* CONF_HW_RXTX_RATE_MCS6 */
- 5, /* CONF_HW_RXTX_RATE_MCS5 */
- 4, /* CONF_HW_RXTX_RATE_MCS4 */
- 3, /* CONF_HW_RXTX_RATE_MCS3 */
- 2, /* CONF_HW_RXTX_RATE_MCS2 */
- 1, /* CONF_HW_RXTX_RATE_MCS1 */
- 0, /* CONF_HW_RXTX_RATE_MCS0 */
-
- 11, /* CONF_HW_RXTX_RATE_54 */
- 10, /* CONF_HW_RXTX_RATE_48 */
- 9, /* CONF_HW_RXTX_RATE_36 */
- 8, /* CONF_HW_RXTX_RATE_24 */
-
- /* TI-specific rate */
- CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_22 */
-
- 7, /* CONF_HW_RXTX_RATE_18 */
- 6, /* CONF_HW_RXTX_RATE_12 */
- 3, /* CONF_HW_RXTX_RATE_11 */
- 5, /* CONF_HW_RXTX_RATE_9 */
- 4, /* CONF_HW_RXTX_RATE_6 */
- 2, /* CONF_HW_RXTX_RATE_5_5 */
- 1, /* CONF_HW_RXTX_RATE_2 */
- 0 /* CONF_HW_RXTX_RATE_1 */
-};
-
-/* 11n STA capabilities */
-#define HW_RX_HIGHEST_RATE 72
-
-#define WL12XX_HT_CAP { \
- .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 | \
- (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT), \
- .ht_supported = true, \
- .ampdu_factor = IEEE80211_HT_MAX_AMPDU_8K, \
- .ampdu_density = IEEE80211_HT_MPDU_DENSITY_8, \
- .mcs = { \
- .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, \
- .rx_highest = cpu_to_le16(HW_RX_HIGHEST_RATE), \
- .tx_params = IEEE80211_HT_MCS_TX_DEFINED, \
- }, \
-}
-
/* can't be const, mac80211 writes to this */
static struct ieee80211_supported_band wl1271_band_2ghz = {
.channels = wl1271_channels,
.n_channels = ARRAY_SIZE(wl1271_channels),
.bitrates = wl1271_rates,
.n_bitrates = ARRAY_SIZE(wl1271_rates),
- .ht_cap = WL12XX_HT_CAP,
};
/* 5 GHz data rates for WL1273 */
@@ -4784,48 +4343,11 @@
{ .hw_value = 165, .center_freq = 5825, .max_power = 25 },
};
-/* mapping to indexes for wl1271_rates_5ghz */
-static const u8 wl1271_rate_to_idx_5ghz[] = {
- /* MCS rates are used only with 11n */
- 7, /* CONF_HW_RXTX_RATE_MCS7_SGI */
- 7, /* CONF_HW_RXTX_RATE_MCS7 */
- 6, /* CONF_HW_RXTX_RATE_MCS6 */
- 5, /* CONF_HW_RXTX_RATE_MCS5 */
- 4, /* CONF_HW_RXTX_RATE_MCS4 */
- 3, /* CONF_HW_RXTX_RATE_MCS3 */
- 2, /* CONF_HW_RXTX_RATE_MCS2 */
- 1, /* CONF_HW_RXTX_RATE_MCS1 */
- 0, /* CONF_HW_RXTX_RATE_MCS0 */
-
- 7, /* CONF_HW_RXTX_RATE_54 */
- 6, /* CONF_HW_RXTX_RATE_48 */
- 5, /* CONF_HW_RXTX_RATE_36 */
- 4, /* CONF_HW_RXTX_RATE_24 */
-
- /* TI-specific rate */
- CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_22 */
-
- 3, /* CONF_HW_RXTX_RATE_18 */
- 2, /* CONF_HW_RXTX_RATE_12 */
- CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_11 */
- 1, /* CONF_HW_RXTX_RATE_9 */
- 0, /* CONF_HW_RXTX_RATE_6 */
- CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_5_5 */
- CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_2 */
- CONF_HW_RXTX_RATE_UNSUPPORTED /* CONF_HW_RXTX_RATE_1 */
-};
-
static struct ieee80211_supported_band wl1271_band_5ghz = {
.channels = wl1271_channels_5ghz,
.n_channels = ARRAY_SIZE(wl1271_channels_5ghz),
.bitrates = wl1271_rates_5ghz,
.n_bitrates = ARRAY_SIZE(wl1271_rates_5ghz),
- .ht_cap = WL12XX_HT_CAP,
-};
-
-static const u8 *wl1271_band_rate_to_idx[] = {
- [IEEE80211_BAND_2GHZ] = wl1271_rate_to_idx_2ghz,
- [IEEE80211_BAND_5GHZ] = wl1271_rate_to_idx_5ghz
};
static const struct ieee80211_ops wl1271_ops = {
@@ -4862,18 +4384,18 @@
};
-u8 wl1271_rate_to_idx(int rate, enum ieee80211_band band)
+u8 wlcore_rate_to_idx(struct wl1271 *wl, u8 rate, enum ieee80211_band band)
{
u8 idx;
- BUG_ON(band >= sizeof(wl1271_band_rate_to_idx)/sizeof(u8 *));
+ BUG_ON(band >= 2);
- if (unlikely(rate >= CONF_HW_RXTX_RATE_MAX)) {
+ if (unlikely(rate >= wl->hw_tx_rate_tbl_size)) {
wl1271_error("Illegal RX rate from HW: %d", rate);
return 0;
}
- idx = wl1271_band_rate_to_idx[band][rate];
+ idx = wl->band_rate_to_idx[band][rate];
if (unlikely(idx == CONF_HW_RXTX_RATE_UNSUPPORTED)) {
wl1271_error("Unsupported RX rate from HW: %d", rate);
return 0;
@@ -5027,34 +4549,6 @@
.read = wl1271_sysfs_read_fwlog,
};
-static bool wl12xx_mac_in_fuse(struct wl1271 *wl)
-{
- bool supported = false;
- u8 major, minor;
-
- if (wl->chip.id == CHIP_ID_1283_PG20) {
- major = WL128X_PG_GET_MAJOR(wl->hw_pg_ver);
- minor = WL128X_PG_GET_MINOR(wl->hw_pg_ver);
-
- /* in wl128x we have the MAC address if the PG is >= (2, 1) */
- if (major > 2 || (major == 2 && minor >= 1))
- supported = true;
- } else {
- major = WL127X_PG_GET_MAJOR(wl->hw_pg_ver);
- minor = WL127X_PG_GET_MINOR(wl->hw_pg_ver);
-
- /* in wl127x we have the MAC address if the PG is >= (3, 1) */
- if (major == 3 && minor >= 1)
- supported = true;
- }
-
- wl1271_debug(DEBUG_PROBE,
- "PG Ver major = %d minor = %d, MAC %s present",
- major, minor, supported ? "is" : "is not");
-
- return supported;
-}
-
static void wl12xx_derive_mac_addresses(struct wl1271 *wl,
u32 oui, u32 nic, int n)
{
@@ -5080,47 +4574,23 @@
wl->hw->wiphy->addresses = wl->addresses;
}
-static void wl12xx_get_fuse_mac(struct wl1271 *wl)
-{
- u32 mac1, mac2;
-
- wl1271_set_partition(wl, &wl12xx_part_table[PART_DRPW]);
-
- mac1 = wl1271_read32(wl, WL12XX_REG_FUSE_BD_ADDR_1);
- mac2 = wl1271_read32(wl, WL12XX_REG_FUSE_BD_ADDR_2);
-
- /* these are the two parts of the BD_ADDR */
- wl->fuse_oui_addr = ((mac2 & 0xffff) << 8) +
- ((mac1 & 0xff000000) >> 24);
- wl->fuse_nic_addr = mac1 & 0xffffff;
-
- wl1271_set_partition(wl, &wl12xx_part_table[PART_DOWN]);
-}
-
static int wl12xx_get_hw_info(struct wl1271 *wl)
{
int ret;
- u32 die_info;
ret = wl12xx_set_power_on(wl);
if (ret < 0)
goto out;
- wl->chip.id = wl1271_read32(wl, CHIP_ID_B);
+ wl->chip.id = wlcore_read_reg(wl, REG_CHIP_ID_B);
- if (wl->chip.id == CHIP_ID_1283_PG20)
- die_info = wl1271_top_reg_read(wl, WL128X_REG_FUSE_DATA_2_1);
- else
- die_info = wl1271_top_reg_read(wl, WL127X_REG_FUSE_DATA_2_1);
+ wl->fuse_oui_addr = 0;
+ wl->fuse_nic_addr = 0;
- wl->hw_pg_ver = (s8) (die_info & PG_VER_MASK) >> PG_VER_OFFSET;
+ wl->hw_pg_ver = wl->ops->get_pg_ver(wl);
- if (!wl12xx_mac_in_fuse(wl)) {
- wl->fuse_oui_addr = 0;
- wl->fuse_nic_addr = 0;
- } else {
- wl12xx_get_fuse_mac(wl);
- }
+ if (wl->ops->get_mac)
+ wl->ops->get_mac(wl);
wl1271_power_off(wl);
out:
@@ -5255,8 +4725,12 @@
*/
memcpy(&wl->bands[IEEE80211_BAND_2GHZ], &wl1271_band_2ghz,
sizeof(wl1271_band_2ghz));
+ memcpy(&wl->bands[IEEE80211_BAND_2GHZ].ht_cap, &wl->ht_cap,
+ sizeof(wl->ht_cap));
memcpy(&wl->bands[IEEE80211_BAND_5GHZ], &wl1271_band_5ghz,
sizeof(wl1271_band_5ghz));
+ memcpy(&wl->bands[IEEE80211_BAND_5GHZ].ht_cap, &wl->ht_cap,
+ sizeof(wl->ht_cap));
wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
&wl->bands[IEEE80211_BAND_2GHZ];
@@ -5280,14 +4754,14 @@
wl->hw->sta_data_size = sizeof(struct wl1271_station);
wl->hw->vif_data_size = sizeof(struct wl12xx_vif);
- wl->hw->max_rx_aggregation_subframes = 8;
+ wl->hw->max_rx_aggregation_subframes = wl->conf.ht.rx_ba_win_size;
return 0;
}
#define WL1271_DEFAULT_CHANNEL 0
-static struct ieee80211_hw *wl1271_alloc_hw(void)
+struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size)
{
struct ieee80211_hw *hw;
struct wl1271 *wl;
@@ -5306,6 +4780,13 @@
wl = hw->priv;
memset(wl, 0, sizeof(*wl));
+ wl->priv = kzalloc(priv_size, GFP_KERNEL);
+ if (!wl->priv) {
+ wl1271_error("could not alloc wl priv");
+ ret = -ENOMEM;
+ goto err_priv_alloc;
+ }
+
INIT_LIST_HEAD(&wl->wlvif_list);
wl->hw = hw;
@@ -5342,7 +4823,6 @@
wl->quirks = 0;
wl->platform_quirks = 0;
wl->sched_scanning = false;
- wl->tx_spare_blocks = TX_HW_BLOCK_SPARE_DEFAULT;
wl->system_hlid = WL12XX_SYSTEM_HLID;
wl->active_sta_count = 0;
wl->fwlog_size = 0;
@@ -5352,7 +4832,7 @@
__set_bit(WL12XX_SYSTEM_HLID, wl->links_map);
memset(wl->tx_frames_map, 0, sizeof(wl->tx_frames_map));
- for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
+ for (i = 0; i < wl->num_tx_desc; i++)
wl->tx_frames[i] = NULL;
spin_lock_init(&wl->wl_lock);
@@ -5361,9 +4841,6 @@
wl->fw_type = WL12XX_FW_TYPE_NONE;
mutex_init(&wl->mutex);
- /* Apply default driver configuration. */
- wl1271_conf_init(wl);
-
order = get_order(WL1271_AGGR_BUFFER_SIZE);
wl->aggr_buf = (u8 *)__get_free_pages(GFP_KERNEL, order);
if (!wl->aggr_buf) {
@@ -5384,8 +4861,17 @@
goto err_dummy_packet;
}
+ wl->mbox = kmalloc(sizeof(*wl->mbox), GFP_DMA);
+ if (!wl->mbox) {
+ ret = -ENOMEM;
+ goto err_fwlog;
+ }
+
return hw;
+err_fwlog:
+ free_page((unsigned long)wl->fwlog);
+
err_dummy_packet:
dev_kfree_skb(wl->dummy_packet);
@@ -5397,14 +4883,18 @@
err_hw:
wl1271_debugfs_exit(wl);
+ kfree(wl->priv);
+
+err_priv_alloc:
ieee80211_free_hw(hw);
err_hw_alloc:
return ERR_PTR(ret);
}
+EXPORT_SYMBOL_GPL(wlcore_alloc_hw);
-static int wl1271_free_hw(struct wl1271 *wl)
+int wlcore_free_hw(struct wl1271 *wl)
{
/* Unblock any fwlog readers */
mutex_lock(&wl->mutex);
@@ -5434,10 +4924,12 @@
kfree(wl->tx_res_if);
destroy_workqueue(wl->freezable_wq);
+ kfree(wl->priv);
ieee80211_free_hw(wl->hw);
return 0;
}
+EXPORT_SYMBOL_GPL(wlcore_free_hw);
static irqreturn_t wl12xx_hardirq(int irq, void *cookie)
{
@@ -5468,22 +4960,22 @@
return IRQ_WAKE_THREAD;
}
-static int __devinit wl12xx_probe(struct platform_device *pdev)
+int __devinit wlcore_probe(struct wl1271 *wl, struct platform_device *pdev)
{
struct wl12xx_platform_data *pdata = pdev->dev.platform_data;
- struct ieee80211_hw *hw;
- struct wl1271 *wl;
unsigned long irqflags;
- int ret = -ENODEV;
+ int ret;
- hw = wl1271_alloc_hw();
- if (IS_ERR(hw)) {
- wl1271_error("can't allocate hw");
- ret = PTR_ERR(hw);
- goto out;
+ if (!wl->ops || !wl->ptable) {
+ ret = -EINVAL;
+ goto out_free_hw;
}
- wl = hw->priv;
+ BUG_ON(wl->num_tx_desc > WLCORE_MAX_TX_DESCRIPTORS);
+
+ /* adjust some runtime configuration parameters */
+ wlcore_adjust_conf(wl);
+
wl->irq = platform_get_irq(pdev, 0);
wl->ref_clock = pdata->board_ref_clock;
wl->tcxo_clock = pdata->board_tcxo_clock;
@@ -5512,7 +5004,7 @@
wl->irq_wake_enabled = true;
device_init_wakeup(wl->dev, 1);
if (pdata->pwr_in_suspend)
- hw->wiphy->wowlan.flags = WIPHY_WOWLAN_ANY;
+ wl->hw->wiphy->wowlan.flags = WIPHY_WOWLAN_ANY;
}
disable_irq(wl->irq);
@@ -5546,7 +5038,7 @@
goto out_hw_pg_ver;
}
- return 0;
+ goto out;
out_hw_pg_ver:
device_remove_file(wl->dev, &dev_attr_hw_pg_ver);
@@ -5558,13 +5050,14 @@
free_irq(wl->irq, wl);
out_free_hw:
- wl1271_free_hw(wl);
+ wlcore_free_hw(wl);
out:
return ret;
}
+EXPORT_SYMBOL_GPL(wlcore_probe);
-static int __devexit wl12xx_remove(struct platform_device *pdev)
+int __devexit wlcore_remove(struct platform_device *pdev)
{
struct wl1271 *wl = platform_get_drvdata(pdev);
@@ -5574,38 +5067,11 @@
}
wl1271_unregister_hw(wl);
free_irq(wl->irq, wl);
- wl1271_free_hw(wl);
+ wlcore_free_hw(wl);
return 0;
}
-
-static const struct platform_device_id wl12xx_id_table[] __devinitconst = {
- { "wl12xx", 0 },
- { } /* Terminating Entry */
-};
-MODULE_DEVICE_TABLE(platform, wl12xx_id_table);
-
-static struct platform_driver wl12xx_driver = {
- .probe = wl12xx_probe,
- .remove = __devexit_p(wl12xx_remove),
- .id_table = wl12xx_id_table,
- .driver = {
- .name = "wl12xx_driver",
- .owner = THIS_MODULE,
- }
-};
-
-static int __init wl12xx_init(void)
-{
- return platform_driver_register(&wl12xx_driver);
-}
-module_init(wl12xx_init);
-
-static void __exit wl12xx_exit(void)
-{
- platform_driver_unregister(&wl12xx_driver);
-}
-module_exit(wl12xx_exit);
+EXPORT_SYMBOL_GPL(wlcore_remove);
u32 wl12xx_debug_level = DEBUG_NONE;
EXPORT_SYMBOL_GPL(wl12xx_debug_level);
@@ -5619,6 +5085,9 @@
module_param(bug_on_recovery, bool, S_IRUSR | S_IWUSR);
MODULE_PARM_DESC(bug_on_recovery, "BUG() on fw recovery");
+module_param(no_recovery, bool, S_IRUSR | S_IWUSR);
+MODULE_PARM_DESC(no_recovery, "Prevent HW recovery. FW will remain stuck.");
+
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
diff --git a/drivers/net/wireless/wl12xx/ps.c b/drivers/net/wireless/ti/wlcore/ps.c
similarity index 97%
rename from drivers/net/wireless/wl12xx/ps.c
rename to drivers/net/wireless/ti/wlcore/ps.c
index 78f598b..756eee2 100644
--- a/drivers/net/wireless/wl12xx/ps.c
+++ b/drivers/net/wireless/ti/wlcore/ps.c
@@ -21,7 +21,6 @@
*
*/
-#include "reg.h"
#include "ps.h"
#include "io.h"
#include "tx.h"
@@ -62,7 +61,7 @@
}
wl1271_debug(DEBUG_PSM, "chip to elp");
- wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP);
+ wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG, ELPCTRL_SLEEP);
set_bit(WL1271_FLAG_IN_ELP, &wl->flags);
out:
@@ -74,6 +73,9 @@
{
struct wl12xx_vif *wlvif;
+ if (wl->quirks & WLCORE_QUIRK_NO_ELP)
+ return;
+
/* we shouldn't get consecutive sleep requests */
if (WARN_ON(test_and_set_bit(WL1271_FLAG_ELP_REQUESTED, &wl->flags)))
return;
@@ -125,7 +127,7 @@
wl->elp_compl = &compl;
spin_unlock_irqrestore(&wl->wl_lock, flags);
- wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_WAKE_UP);
+ wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG, ELPCTRL_WAKE_UP);
if (!pending) {
ret = wait_for_completion_timeout(
diff --git a/drivers/net/wireless/wl12xx/ps.h b/drivers/net/wireless/ti/wlcore/ps.h
similarity index 98%
rename from drivers/net/wireless/wl12xx/ps.h
rename to drivers/net/wireless/ti/wlcore/ps.h
index 5f19d4f..de4f9da 100644
--- a/drivers/net/wireless/wl12xx/ps.h
+++ b/drivers/net/wireless/ti/wlcore/ps.h
@@ -24,7 +24,7 @@
#ifndef __PS_H__
#define __PS_H__
-#include "wl12xx.h"
+#include "wlcore.h"
#include "acx.h"
int wl1271_ps_set_mode(struct wl1271 *wl, struct wl12xx_vif *wlvif,
diff --git a/drivers/net/wireless/wl12xx/rx.c b/drivers/net/wireless/ti/wlcore/rx.c
similarity index 69%
rename from drivers/net/wireless/wl12xx/rx.c
rename to drivers/net/wireless/ti/wlcore/rx.c
index cfa6071..89bd938 100644
--- a/drivers/net/wireless/wl12xx/rx.c
+++ b/drivers/net/wireless/ti/wlcore/rx.c
@@ -24,34 +24,36 @@
#include <linux/gfp.h>
#include <linux/sched.h>
-#include "wl12xx.h"
+#include "wlcore.h"
#include "debug.h"
#include "acx.h"
-#include "reg.h"
#include "rx.h"
#include "tx.h"
#include "io.h"
+#include "hw_ops.h"
-static u8 wl12xx_rx_get_mem_block(struct wl12xx_fw_status *status,
- u32 drv_rx_counter)
+/*
+ * TODO: this is here just for now, it must be removed when the data
+ * operations are in place.
+ */
+#include "../wl12xx/reg.h"
+
+static u32 wlcore_rx_get_buf_size(struct wl1271 *wl,
+ u32 rx_pkt_desc)
{
- return le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) &
- RX_MEM_BLOCK_MASK;
+ if (wl->quirks & WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN)
+ return (rx_pkt_desc & ALIGNED_RX_BUF_SIZE_MASK) >>
+ ALIGNED_RX_BUF_SIZE_SHIFT;
+
+ return (rx_pkt_desc & RX_BUF_SIZE_MASK) >> RX_BUF_SIZE_SHIFT_DIV;
}
-static u32 wl12xx_rx_get_buf_size(struct wl12xx_fw_status *status,
- u32 drv_rx_counter)
+static u32 wlcore_rx_get_align_buf_size(struct wl1271 *wl, u32 pkt_len)
{
- return (le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) &
- RX_BUF_SIZE_MASK) >> RX_BUF_SIZE_SHIFT_DIV;
-}
+ if (wl->quirks & WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN)
+ return ALIGN(pkt_len, WL12XX_BUS_BLOCK_SIZE);
-static bool wl12xx_rx_get_unaligned(struct wl12xx_fw_status *status,
- u32 drv_rx_counter)
-{
- /* Convert the value to bool */
- return !!(le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) &
- RX_BUF_UNALIGNED_PAYLOAD);
+ return pkt_len;
}
static void wl1271_rx_status(struct wl1271 *wl,
@@ -66,10 +68,10 @@
else
status->band = IEEE80211_BAND_5GHZ;
- status->rate_idx = wl1271_rate_to_idx(desc->rate, status->band);
+ status->rate_idx = wlcore_rate_to_idx(wl, desc->rate, status->band);
/* 11n support */
- if (desc->rate <= CONF_HW_RXTX_RATE_MCS0)
+ if (desc->rate <= wl->hw_min_ht_rate)
status->flag |= RX_FLAG_HT;
status->signal = desc->rssi;
@@ -98,7 +100,7 @@
}
static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length,
- bool unaligned, u8 *hlid)
+ enum wl_rx_buf_align rx_align, u8 *hlid)
{
struct wl1271_rx_descriptor *desc;
struct sk_buff *skb;
@@ -106,8 +108,9 @@
u8 *buf;
u8 beacon = 0;
u8 is_data = 0;
- u8 reserved = unaligned ? NET_IP_ALIGN : 0;
+ u8 reserved = 0;
u16 seq_num;
+ u32 pkt_data_len;
/*
* In PLT mode we seem to get frames and mac80211 warns about them,
@@ -116,6 +119,16 @@
if (unlikely(wl->plt))
return -EINVAL;
+ pkt_data_len = wlcore_hw_get_rx_packet_len(wl, data, length);
+ if (!pkt_data_len) {
+ wl1271_error("Invalid packet arrived from HW. length %d",
+ length);
+ return -EINVAL;
+ }
+
+ if (rx_align == WLCORE_RX_BUF_UNALIGNED)
+ reserved = NET_IP_ALIGN;
+
/* the data read starts with the descriptor */
desc = (struct wl1271_rx_descriptor *) data;
@@ -142,8 +155,8 @@
return -EINVAL;
}
- /* skb length not included rx descriptor */
- skb = __dev_alloc_skb(length + reserved - sizeof(*desc), GFP_KERNEL);
+ /* skb length not including rx descriptor */
+ skb = __dev_alloc_skb(pkt_data_len + reserved, GFP_KERNEL);
if (!skb) {
wl1271_error("Couldn't allocate RX frame");
return -ENOMEM;
@@ -152,7 +165,7 @@
/* reserve the unaligned payload(if any) */
skb_reserve(skb, reserved);
- buf = skb_put(skb, length - sizeof(*desc));
+ buf = skb_put(skb, pkt_data_len);
/*
* Copy packets from aggregation buffer to the skbs without rx
@@ -160,7 +173,10 @@
* packets copy the packets in offset of 2 bytes guarantee IP header
* payload aligned to 4 bytes.
*/
- memcpy(buf, data + sizeof(*desc), length - sizeof(*desc));
+ memcpy(buf, data + sizeof(*desc), pkt_data_len);
+ if (rx_align == WLCORE_RX_BUF_PADDED)
+ skb_pull(skb, NET_IP_ALIGN);
+
*hlid = desc->hlid;
hdr = (struct ieee80211_hdr *)skb->data;
@@ -177,36 +193,35 @@
beacon ? "beacon" : "",
seq_num, *hlid);
- skb_trim(skb, skb->len - desc->pad_len);
-
skb_queue_tail(&wl->deferred_rx_queue, skb);
queue_work(wl->freezable_wq, &wl->netstack_work);
return is_data;
}
-void wl12xx_rx(struct wl1271 *wl, struct wl12xx_fw_status *status)
+void wl12xx_rx(struct wl1271 *wl, struct wl_fw_status *status)
{
- struct wl1271_acx_mem_map *wl_mem_map = wl->target_mem_map;
unsigned long active_hlids[BITS_TO_LONGS(WL12XX_MAX_LINKS)] = {0};
u32 buf_size;
u32 fw_rx_counter = status->fw_rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
u32 drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
u32 rx_counter;
- u32 mem_block;
- u32 pkt_length;
- u32 pkt_offset;
+ u32 pkt_len, align_pkt_len;
+ u32 pkt_offset, des;
u8 hlid;
- bool unaligned = false;
+ enum wl_rx_buf_align rx_align;
while (drv_rx_counter != fw_rx_counter) {
buf_size = 0;
rx_counter = drv_rx_counter;
while (rx_counter != fw_rx_counter) {
- pkt_length = wl12xx_rx_get_buf_size(status, rx_counter);
- if (buf_size + pkt_length > WL1271_AGGR_BUFFER_SIZE)
+ des = le32_to_cpu(status->rx_pkt_descs[rx_counter]);
+ pkt_len = wlcore_rx_get_buf_size(wl, des);
+ align_pkt_len = wlcore_rx_get_align_buf_size(wl,
+ pkt_len);
+ if (buf_size + align_pkt_len > WL1271_AGGR_BUFFER_SIZE)
break;
- buf_size += pkt_length;
+ buf_size += align_pkt_len;
rx_counter++;
rx_counter &= NUM_RX_PKT_DESC_MOD_MASK;
}
@@ -216,38 +231,18 @@
break;
}
- if (wl->chip.id != CHIP_ID_1283_PG20) {
- /*
- * Choose the block we want to read
- * For aggregated packets, only the first memory block
- * should be retrieved. The FW takes care of the rest.
- */
- mem_block = wl12xx_rx_get_mem_block(status,
- drv_rx_counter);
-
- wl->rx_mem_pool_addr.addr = (mem_block << 8) +
- le32_to_cpu(wl_mem_map->packet_memory_pool_start);
-
- wl->rx_mem_pool_addr.addr_extra =
- wl->rx_mem_pool_addr.addr + 4;
-
- wl1271_write(wl, WL1271_SLV_REG_DATA,
- &wl->rx_mem_pool_addr,
- sizeof(wl->rx_mem_pool_addr), false);
- }
-
/* Read all available packets at once */
- wl1271_read(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf,
- buf_size, true);
+ des = le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]);
+ wlcore_hw_prepare_read(wl, des, buf_size);
+ wlcore_read_data(wl, REG_SLV_MEM_DATA, wl->aggr_buf,
+ buf_size, true);
/* Split data into separate packets */
pkt_offset = 0;
while (pkt_offset < buf_size) {
- pkt_length = wl12xx_rx_get_buf_size(status,
- drv_rx_counter);
-
- unaligned = wl12xx_rx_get_unaligned(status,
- drv_rx_counter);
+ des = le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]);
+ pkt_len = wlcore_rx_get_buf_size(wl, des);
+ rx_align = wlcore_hw_get_rx_buf_align(wl, des);
/*
* the handle data call can only fail in memory-outage
@@ -256,7 +251,7 @@
*/
if (wl1271_rx_handle_data(wl,
wl->aggr_buf + pkt_offset,
- pkt_length, unaligned,
+ pkt_len, rx_align,
&hlid) == 1) {
if (hlid < WL12XX_MAX_LINKS)
__set_bit(hlid, active_hlids);
@@ -269,7 +264,7 @@
wl->rx_counter++;
drv_rx_counter++;
drv_rx_counter &= NUM_RX_PKT_DESC_MOD_MASK;
- pkt_offset += pkt_length;
+ pkt_offset += wlcore_rx_get_align_buf_size(wl, pkt_len);
}
}
@@ -277,8 +272,9 @@
* Write the driver's packet counter to the FW. This is only required
* for older hardware revisions
*/
- if (wl->quirks & WL12XX_QUIRK_END_OF_TRANSACTION)
- wl1271_write32(wl, RX_DRIVER_COUNTER_ADDRESS, wl->rx_counter);
+ if (wl->quirks & WLCORE_QUIRK_END_OF_TRANSACTION)
+ wl1271_write32(wl, WL12XX_REG_RX_DRIVER_COUNTER,
+ wl->rx_counter);
wl12xx_rearm_rx_streaming(wl, active_hlids);
}
diff --git a/drivers/net/wireless/wl12xx/rx.h b/drivers/net/wireless/ti/wlcore/rx.h
similarity index 91%
rename from drivers/net/wireless/wl12xx/rx.h
rename to drivers/net/wireless/ti/wlcore/rx.h
index 86ba6b1..6e129e2 100644
--- a/drivers/net/wireless/wl12xx/rx.h
+++ b/drivers/net/wireless/ti/wlcore/rx.h
@@ -96,9 +96,19 @@
#define RX_MEM_BLOCK_MASK 0xFF
#define RX_BUF_SIZE_MASK 0xFFF00
#define RX_BUF_SIZE_SHIFT_DIV 6
+#define ALIGNED_RX_BUF_SIZE_MASK 0xFFFF00
+#define ALIGNED_RX_BUF_SIZE_SHIFT 8
+
/* If set, the start of IP payload is not 4 bytes aligned */
#define RX_BUF_UNALIGNED_PAYLOAD BIT(20)
+/* Describes the alignment state of a Rx buffer */
+enum wl_rx_buf_align {
+ WLCORE_RX_BUF_ALIGNED,
+ WLCORE_RX_BUF_UNALIGNED,
+ WLCORE_RX_BUF_PADDED,
+};
+
enum {
WL12XX_RX_CLASS_UNKNOWN,
WL12XX_RX_CLASS_MANAGEMENT,
@@ -126,7 +136,7 @@
u8 reserved;
} __packed;
-void wl12xx_rx(struct wl1271 *wl, struct wl12xx_fw_status *status);
+void wl12xx_rx(struct wl1271 *wl, struct wl_fw_status *status);
u8 wl1271_rate_to_idx(int rate, enum ieee80211_band band);
#endif
diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/ti/wlcore/scan.c
similarity index 94%
rename from drivers/net/wireless/wl12xx/scan.c
rename to drivers/net/wireless/ti/wlcore/scan.c
index fcba055..ade21a0 100644
--- a/drivers/net/wireless/wl12xx/scan.c
+++ b/drivers/net/wireless/ti/wlcore/scan.c
@@ -23,7 +23,7 @@
#include <linux/ieee80211.h>
-#include "wl12xx.h"
+#include "wlcore.h"
#include "debug.h"
#include "cmd.h"
#include "scan.h"
@@ -417,6 +417,23 @@
int i, j;
u32 flags;
bool force_passive = !req->n_ssids;
+ u32 min_dwell_time_active, max_dwell_time_active, delta_per_probe;
+ u32 dwell_time_passive, dwell_time_dfs;
+
+ if (band == IEEE80211_BAND_5GHZ)
+ delta_per_probe = c->dwell_time_delta_per_probe_5;
+ else
+ delta_per_probe = c->dwell_time_delta_per_probe;
+
+ min_dwell_time_active = c->base_dwell_time +
+ req->n_ssids * c->num_probe_reqs * delta_per_probe;
+
+ max_dwell_time_active = min_dwell_time_active + c->max_dwell_time_delta;
+
+ min_dwell_time_active = DIV_ROUND_UP(min_dwell_time_active, 1000);
+ max_dwell_time_active = DIV_ROUND_UP(max_dwell_time_active, 1000);
+ dwell_time_passive = DIV_ROUND_UP(c->dwell_time_passive, 1000);
+ dwell_time_dfs = DIV_ROUND_UP(c->dwell_time_dfs, 1000);
for (i = 0, j = start;
i < req->n_channels && j < max_channels;
@@ -440,21 +457,24 @@
req->channels[i]->flags);
wl1271_debug(DEBUG_SCAN, "max_power %d",
req->channels[i]->max_power);
+ wl1271_debug(DEBUG_SCAN, "min_dwell_time %d max dwell time %d",
+ min_dwell_time_active,
+ max_dwell_time_active);
if (flags & IEEE80211_CHAN_RADAR) {
channels[j].flags |= SCAN_CHANNEL_FLAGS_DFS;
channels[j].passive_duration =
- cpu_to_le16(c->dwell_time_dfs);
+ cpu_to_le16(dwell_time_dfs);
} else {
channels[j].passive_duration =
- cpu_to_le16(c->dwell_time_passive);
+ cpu_to_le16(dwell_time_passive);
}
channels[j].min_duration =
- cpu_to_le16(c->min_dwell_time_active);
+ cpu_to_le16(min_dwell_time_active);
channels[j].max_duration =
- cpu_to_le16(c->max_dwell_time_active);
+ cpu_to_le16(max_dwell_time_active);
channels[j].tx_power_att = req->channels[i]->max_power;
channels[j].channel = req->channels[i]->hw_value;
diff --git a/drivers/net/wireless/wl12xx/scan.h b/drivers/net/wireless/ti/wlcore/scan.h
similarity index 98%
rename from drivers/net/wireless/wl12xx/scan.h
rename to drivers/net/wireless/ti/wlcore/scan.h
index 96ff457..81ee36a 100644
--- a/drivers/net/wireless/wl12xx/scan.h
+++ b/drivers/net/wireless/ti/wlcore/scan.h
@@ -24,7 +24,7 @@
#ifndef __SCAN_H__
#define __SCAN_H__
-#include "wl12xx.h"
+#include "wlcore.h"
int wl1271_scan(struct wl1271 *wl, struct ieee80211_vif *vif,
const u8 *ssid, size_t ssid_len,
@@ -55,7 +55,7 @@
#define WL1271_SCAN_BAND_2_4_GHZ 0
#define WL1271_SCAN_BAND_5_GHZ 1
-#define WL1271_SCAN_TIMEOUT 10000 /* msec */
+#define WL1271_SCAN_TIMEOUT 30000 /* msec */
enum {
WL1271_SCAN_STATE_IDLE,
diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c
similarity index 98%
rename from drivers/net/wireless/wl12xx/sdio.c
rename to drivers/net/wireless/ti/wlcore/sdio.c
index 4b3c327..0a72347 100644
--- a/drivers/net/wireless/wl12xx/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -33,7 +33,7 @@
#include <linux/wl12xx.h>
#include <linux/pm_runtime.h>
-#include "wl12xx.h"
+#include "wlcore.h"
#include "wl12xx_80211.h"
#include "io.h"
@@ -76,7 +76,7 @@
sdio_claim_host(func);
- if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) {
+ if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG)) {
((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret);
dev_dbg(child->parent, "sdio read 52 addr 0x%x, byte 0x%02x\n",
addr, ((u8 *)buf)[0]);
@@ -105,7 +105,7 @@
sdio_claim_host(func);
- if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) {
+ if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG)) {
sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret);
dev_dbg(child->parent, "sdio write 52 addr 0x%x, byte 0x%02x\n",
addr, ((u8 *)buf)[0]);
diff --git a/drivers/net/wireless/wl12xx/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
similarity index 99%
rename from drivers/net/wireless/wl12xx/spi.c
rename to drivers/net/wireless/ti/wlcore/spi.c
index 2fc18a8..553cd3c 100644
--- a/drivers/net/wireless/wl12xx/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -30,12 +30,10 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include "wl12xx.h"
+#include "wlcore.h"
#include "wl12xx_80211.h"
#include "io.h"
-#include "reg.h"
-
#define WSPI_CMD_READ 0x40000000
#define WSPI_CMD_WRITE 0x00000000
#define WSPI_CMD_FIXED 0x20000000
diff --git a/drivers/net/wireless/wl12xx/testmode.c b/drivers/net/wireless/ti/wlcore/testmode.c
similarity index 99%
rename from drivers/net/wireless/wl12xx/testmode.c
rename to drivers/net/wireless/ti/wlcore/testmode.c
index 1e93bb9..9cda706 100644
--- a/drivers/net/wireless/wl12xx/testmode.c
+++ b/drivers/net/wireless/ti/wlcore/testmode.c
@@ -25,10 +25,9 @@
#include <linux/slab.h>
#include <net/genetlink.h>
-#include "wl12xx.h"
+#include "wlcore.h"
#include "debug.h"
#include "acx.h"
-#include "reg.h"
#include "ps.h"
#include "io.h"
diff --git a/drivers/net/wireless/wl12xx/testmode.h b/drivers/net/wireless/ti/wlcore/testmode.h
similarity index 100%
rename from drivers/net/wireless/wl12xx/testmode.h
rename to drivers/net/wireless/ti/wlcore/testmode.h
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/ti/wlcore/tx.c
similarity index 90%
rename from drivers/net/wireless/wl12xx/tx.c
rename to drivers/net/wireless/ti/wlcore/tx.c
index 43ae491..6893bc2 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/ti/wlcore/tx.c
@@ -25,13 +25,19 @@
#include <linux/module.h>
#include <linux/etherdevice.h>
-#include "wl12xx.h"
+#include "wlcore.h"
#include "debug.h"
#include "io.h"
-#include "reg.h"
#include "ps.h"
#include "tx.h"
#include "event.h"
+#include "hw_ops.h"
+
+/*
+ * TODO: this is here just for now, it must be removed when the data
+ * operations are in place.
+ */
+#include "../wl12xx/reg.h"
static int wl1271_set_default_wep_key(struct wl1271 *wl,
struct wl12xx_vif *wlvif, u8 id)
@@ -56,8 +62,8 @@
{
int id;
- id = find_first_zero_bit(wl->tx_frames_map, ACX_TX_DESCRIPTORS);
- if (id >= ACX_TX_DESCRIPTORS)
+ id = find_first_zero_bit(wl->tx_frames_map, wl->num_tx_desc);
+ if (id >= wl->num_tx_desc)
return -EBUSY;
__set_bit(id, wl->tx_frames_map);
@@ -69,7 +75,7 @@
static void wl1271_free_tx_id(struct wl1271 *wl, int id)
{
if (__test_and_clear_bit(id, wl->tx_frames_map)) {
- if (unlikely(wl->tx_frames_cnt == ACX_TX_DESCRIPTORS))
+ if (unlikely(wl->tx_frames_cnt == wl->num_tx_desc))
clear_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags);
wl->tx_frames[id] = NULL;
@@ -167,14 +173,15 @@
return wlvif->dev_hlid;
}
-static unsigned int wl12xx_calc_packet_alignment(struct wl1271 *wl,
- unsigned int packet_length)
+unsigned int wlcore_calc_packet_alignment(struct wl1271 *wl,
+ unsigned int packet_length)
{
- if (wl->quirks & WL12XX_QUIRK_NO_BLOCKSIZE_ALIGNMENT)
- return ALIGN(packet_length, WL1271_TX_ALIGN_TO);
- else
+ if (wl->quirks & WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN)
return ALIGN(packet_length, WL12XX_BUS_BLOCK_SIZE);
+ else
+ return ALIGN(packet_length, WL1271_TX_ALIGN_TO);
}
+EXPORT_SYMBOL(wlcore_calc_packet_alignment);
static int wl1271_tx_allocate(struct wl1271 *wl, struct wl12xx_vif *wlvif,
struct sk_buff *skb, u32 extra, u32 buf_offset,
@@ -182,10 +189,9 @@
{
struct wl1271_tx_hw_descr *desc;
u32 total_len = skb->len + sizeof(struct wl1271_tx_hw_descr) + extra;
- u32 len;
u32 total_blocks;
int id, ret = -EBUSY, ac;
- u32 spare_blocks = wl->tx_spare_blocks;
+ u32 spare_blocks = wl->normal_tx_spare;
bool is_dummy = false;
if (buf_offset + total_len > WL1271_AGGR_BUFFER_SIZE)
@@ -196,30 +202,19 @@
if (id < 0)
return id;
- /* approximate the number of blocks required for this packet
- in the firmware */
- len = wl12xx_calc_packet_alignment(wl, total_len);
-
- /* in case of a dummy packet, use default amount of spare mem blocks */
- if (unlikely(wl12xx_is_dummy_packet(wl, skb))) {
+ if (unlikely(wl12xx_is_dummy_packet(wl, skb)))
is_dummy = true;
- spare_blocks = TX_HW_BLOCK_SPARE_DEFAULT;
- }
+ else if (wlvif->is_gem)
+ spare_blocks = wl->gem_tx_spare;
- total_blocks = (len + TX_HW_BLOCK_SIZE - 1) / TX_HW_BLOCK_SIZE +
- spare_blocks;
+ total_blocks = wlcore_hw_calc_tx_blocks(wl, total_len, spare_blocks);
if (total_blocks <= wl->tx_blocks_available) {
desc = (struct wl1271_tx_hw_descr *)skb_push(
skb, total_len - skb->len);
- /* HW descriptor fields change between wl127x and wl128x */
- if (wl->chip.id == CHIP_ID_1283_PG20) {
- desc->wl128x_mem.total_mem_blocks = total_blocks;
- } else {
- desc->wl127x_mem.extra_blocks = spare_blocks;
- desc->wl127x_mem.total_mem_blocks = total_blocks;
- }
+ wlcore_hw_set_tx_desc_blocks(wl, desc, total_blocks,
+ spare_blocks);
desc->id = id;
@@ -256,7 +251,7 @@
{
struct timespec ts;
struct wl1271_tx_hw_descr *desc;
- int aligned_len, ac, rate_idx;
+ int ac, rate_idx;
s64 hosttime;
u16 tx_attr = 0;
__le16 frame_control;
@@ -329,44 +324,16 @@
}
tx_attr |= rate_idx << TX_HW_ATTR_OFST_RATE_POLICY;
- desc->reserved = 0;
-
- aligned_len = wl12xx_calc_packet_alignment(wl, skb->len);
-
- if (wl->chip.id == CHIP_ID_1283_PG20) {
- desc->wl128x_mem.extra_bytes = aligned_len - skb->len;
- desc->length = cpu_to_le16(aligned_len >> 2);
-
- wl1271_debug(DEBUG_TX, "tx_fill_hdr: hlid: %d "
- "tx_attr: 0x%x len: %d life: %d mem: %d",
- desc->hlid, tx_attr,
- le16_to_cpu(desc->length),
- le16_to_cpu(desc->life_time),
- desc->wl128x_mem.total_mem_blocks);
- } else {
- int pad;
-
- /* Store the aligned length in terms of words */
- desc->length = cpu_to_le16(aligned_len >> 2);
-
- /* calculate number of padding bytes */
- pad = aligned_len - skb->len;
- tx_attr |= pad << TX_HW_ATTR_OFST_LAST_WORD_PAD;
-
- wl1271_debug(DEBUG_TX, "tx_fill_hdr: pad: %d hlid: %d "
- "tx_attr: 0x%x len: %d life: %d mem: %d", pad,
- desc->hlid, tx_attr,
- le16_to_cpu(desc->length),
- le16_to_cpu(desc->life_time),
- desc->wl127x_mem.total_mem_blocks);
- }
/* for WEP shared auth - no fw encryption is needed */
if (ieee80211_is_auth(frame_control) &&
ieee80211_has_protected(frame_control))
tx_attr |= TX_HW_ATTR_HOST_ENCRYPT;
+ desc->reserved = 0;
desc->tx_attr = cpu_to_le16(tx_attr);
+
+ wlcore_hw_set_tx_desc_data_len(wl, desc, skb);
}
/* caller must hold wl->mutex */
@@ -432,7 +399,7 @@
* In special cases, we want to align to a specific block size
* (eg. for wl128x with SDIO we align to 256).
*/
- total_len = wl12xx_calc_packet_alignment(wl, skb->len);
+ total_len = wlcore_calc_packet_alignment(wl, skb->len);
memcpy(wl->aggr_buf + buf_offset, skb->data, skb->len);
memset(wl->aggr_buf + buf_offset + skb->len, 0, total_len - skb->len);
@@ -718,8 +685,8 @@
* Flush buffer and try again.
*/
wl1271_skb_queue_head(wl, wlvif, skb);
- wl1271_write(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf,
- buf_offset, true);
+ wlcore_write_data(wl, REG_SLV_MEM_DATA, wl->aggr_buf,
+ buf_offset, true);
sent_packets = true;
buf_offset = 0;
continue;
@@ -753,8 +720,8 @@
out_ack:
if (buf_offset) {
- wl1271_write(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf,
- buf_offset, true);
+ wlcore_write_data(wl, REG_SLV_MEM_DATA, wl->aggr_buf,
+ buf_offset, true);
sent_packets = true;
}
if (sent_packets) {
@@ -762,8 +729,8 @@
* Interrupt the firmware with the new packets. This is only
* required for older hardware revisions
*/
- if (wl->quirks & WL12XX_QUIRK_END_OF_TRANSACTION)
- wl1271_write32(wl, WL1271_HOST_WR_ACCESS,
+ if (wl->quirks & WLCORE_QUIRK_END_OF_TRANSACTION)
+ wl1271_write32(wl, WL12XX_HOST_WR_ACCESS,
wl->tx_packets_count);
wl1271_handle_tx_low_watermark(wl);
@@ -792,11 +759,20 @@
{
u8 flags = 0;
- if (rate_class_index >= CONF_HW_RXTX_RATE_MCS_MIN &&
- rate_class_index <= CONF_HW_RXTX_RATE_MCS_MAX)
+ /*
+ * TODO: use wl12xx constants when this code is moved to wl12xx, as
+ * only it uses Tx-completion.
+ */
+ if (rate_class_index <= 8)
flags |= IEEE80211_TX_RC_MCS;
- if (rate_class_index == CONF_HW_RXTX_RATE_MCS7_SGI)
+
+ /*
+ * TODO: use wl12xx constants when this code is moved to wl12xx, as
+ * only it uses Tx-completion.
+ */
+ if (rate_class_index == 0)
flags |= IEEE80211_TX_RC_SHORT_GI;
+
return flags;
}
@@ -813,7 +789,7 @@
u8 retries = 0;
/* check for id legality */
- if (unlikely(id >= ACX_TX_DESCRIPTORS || wl->tx_frames[id] == NULL)) {
+ if (unlikely(id >= wl->num_tx_desc || wl->tx_frames[id] == NULL)) {
wl1271_warning("TX result illegal id: %d", id);
return;
}
@@ -834,7 +810,7 @@
if (result->status == TX_SUCCESS) {
if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
info->flags |= IEEE80211_TX_STAT_ACK;
- rate = wl1271_rate_to_idx(result->rate_class_index,
+ rate = wlcore_rate_to_idx(wl, result->rate_class_index,
wlvif->band);
rate_flags = wl1271_tx_get_rate_flags(result->rate_class_index);
retries = result->ack_failures;
@@ -929,6 +905,7 @@
wl->tx_results_count++;
}
}
+EXPORT_SYMBOL(wl1271_tx_complete);
void wl1271_tx_reset_link_queues(struct wl1271 *wl, u8 hlid)
{
@@ -1006,7 +983,7 @@
if (reset_tx_queues)
wl1271_handle_tx_low_watermark(wl);
- for (i = 0; i < ACX_TX_DESCRIPTORS; i++) {
+ for (i = 0; i < wl->num_tx_desc; i++) {
if (wl->tx_frames[i] == NULL)
continue;
diff --git a/drivers/net/wireless/wl12xx/tx.h b/drivers/net/wireless/ti/wlcore/tx.h
similarity index 97%
rename from drivers/net/wireless/wl12xx/tx.h
rename to drivers/net/wireless/ti/wlcore/tx.h
index 5cf8c32..2fd6e5d 100644
--- a/drivers/net/wireless/wl12xx/tx.h
+++ b/drivers/net/wireless/ti/wlcore/tx.h
@@ -25,9 +25,6 @@
#ifndef __TX_H__
#define __TX_H__
-#define TX_HW_BLOCK_SPARE_DEFAULT 1
-#define TX_HW_BLOCK_SIZE 252
-
#define TX_HW_MGMT_PKT_LIFETIME_TU 2000
#define TX_HW_AP_MODE_PKT_LIFETIME_TU 8000
@@ -212,7 +209,7 @@
void wl12xx_tx_reset_wlvif(struct wl1271 *wl, struct wl12xx_vif *wlvif);
void wl12xx_tx_reset(struct wl1271 *wl, bool reset_tx_queues);
void wl1271_tx_flush(struct wl1271 *wl);
-u8 wl1271_rate_to_idx(int rate, enum ieee80211_band band);
+u8 wlcore_rate_to_idx(struct wl1271 *wl, u8 rate, enum ieee80211_band band);
u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set,
enum ieee80211_band rate_band);
u32 wl1271_tx_min_rate_get(struct wl1271 *wl, u32 rate_set);
@@ -224,6 +221,8 @@
void wl1271_handle_tx_low_watermark(struct wl1271 *wl);
bool wl12xx_is_dummy_packet(struct wl1271 *wl, struct sk_buff *skb);
void wl12xx_rearm_rx_streaming(struct wl1271 *wl, unsigned long *active_hlids);
+unsigned int wlcore_calc_packet_alignment(struct wl1271 *wl,
+ unsigned int packet_length);
/* from main.c */
void wl1271_free_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 hlid);
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/ti/wlcore/wl12xx.h
similarity index 68%
rename from drivers/net/wireless/wl12xx/wl12xx.h
rename to drivers/net/wireless/ti/wlcore/wl12xx.h
index 749a15a..a9b220c 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/ti/wlcore/wl12xx.h
@@ -89,8 +89,6 @@
#define WL1271_AP_BSS_INDEX 0
#define WL1271_AP_DEF_BEACON_EXP 20
-#define ACX_TX_DESCRIPTORS 16
-
#define WL1271_AGGR_BUFFER_SIZE (4 * PAGE_SIZE)
enum wl1271_state {
@@ -105,26 +103,6 @@
WL12XX_FW_TYPE_PLT,
};
-enum wl1271_partition_type {
- PART_DOWN,
- PART_WORK,
- PART_DRPW,
-
- PART_TABLE_LEN
-};
-
-struct wl1271_partition {
- u32 size;
- u32 start;
-};
-
-struct wl1271_partition_set {
- struct wl1271_partition mem;
- struct wl1271_partition reg;
- struct wl1271_partition mem2;
- struct wl1271_partition mem3;
-};
-
struct wl1271;
enum {
@@ -167,8 +145,21 @@
#define AP_MAX_STATIONS 8
+struct wl_fw_packet_counters {
+ /* Cumulative counter of released packets per AC */
+ u8 tx_released_pkts[NUM_TX_QUEUES];
+
+ /* Cumulative counter of freed packets per HLID */
+ u8 tx_lnk_free_pkts[WL12XX_MAX_LINKS];
+
+ /* Cumulative counter of released Voice memory blocks */
+ u8 tx_voice_released_blks;
+
+ u8 padding[3];
+} __packed;
+
/* FW status registers */
-struct wl12xx_fw_status {
+struct wl_fw_status {
__le32 intr;
u8 fw_rx_counter;
u8 drv_rx_counter;
@@ -195,16 +186,12 @@
/* Size (in Memory Blocks) of TX pool */
__le32 tx_total;
- /* Cumulative counter of released packets per AC */
- u8 tx_released_pkts[NUM_TX_QUEUES];
+ struct wl_fw_packet_counters counters;
- /* Cumulative counter of freed packets per HLID */
- u8 tx_lnk_free_pkts[WL12XX_MAX_LINKS];
-
- /* Cumulative counter of released Voice memory blocks */
- u8 tx_voice_released_blks;
- u8 padding_1[3];
__le32 log_start_addr;
+
+ /* Private status to be used by the lower drivers */
+ u8 priv[0];
} __packed;
struct wl1271_rx_mem_pool_addr {
@@ -292,214 +279,6 @@
u8 ba_bitmap;
};
-struct wl1271 {
- struct ieee80211_hw *hw;
- bool mac80211_registered;
-
- struct device *dev;
-
- void *if_priv;
-
- struct wl1271_if_operations *if_ops;
-
- void (*set_power)(bool enable);
- int irq;
- int ref_clock;
-
- spinlock_t wl_lock;
-
- enum wl1271_state state;
- enum wl12xx_fw_type fw_type;
- bool plt;
- u8 last_vif_count;
- struct mutex mutex;
-
- unsigned long flags;
-
- struct wl1271_partition_set part;
-
- struct wl1271_chip chip;
-
- int cmd_box_addr;
- int event_box_addr;
-
- u8 *fw;
- size_t fw_len;
- void *nvs;
- size_t nvs_len;
-
- s8 hw_pg_ver;
-
- /* address read from the fuse ROM */
- u32 fuse_oui_addr;
- u32 fuse_nic_addr;
-
- /* we have up to 2 MAC addresses */
- struct mac_address addresses[2];
- int channel;
- u8 system_hlid;
-
- unsigned long links_map[BITS_TO_LONGS(WL12XX_MAX_LINKS)];
- unsigned long roles_map[BITS_TO_LONGS(WL12XX_MAX_ROLES)];
- unsigned long roc_map[BITS_TO_LONGS(WL12XX_MAX_ROLES)];
- unsigned long rate_policies_map[
- BITS_TO_LONGS(WL12XX_MAX_RATE_POLICIES)];
-
- struct list_head wlvif_list;
-
- u8 sta_count;
- u8 ap_count;
-
- struct wl1271_acx_mem_map *target_mem_map;
-
- /* Accounting for allocated / available TX blocks on HW */
- u32 tx_blocks_freed;
- u32 tx_blocks_available;
- u32 tx_allocated_blocks;
- u32 tx_results_count;
-
- /* amount of spare TX blocks to use */
- u32 tx_spare_blocks;
-
- /* Accounting for allocated / available Tx packets in HW */
- u32 tx_pkts_freed[NUM_TX_QUEUES];
- u32 tx_allocated_pkts[NUM_TX_QUEUES];
-
- /* Transmitted TX packets counter for chipset interface */
- u32 tx_packets_count;
-
- /* Time-offset between host and chipset clocks */
- s64 time_offset;
-
- /* Frames scheduled for transmission, not handled yet */
- int tx_queue_count[NUM_TX_QUEUES];
- long stopped_queues_map;
-
- /* Frames received, not handled yet by mac80211 */
- struct sk_buff_head deferred_rx_queue;
-
- /* Frames sent, not returned yet to mac80211 */
- struct sk_buff_head deferred_tx_queue;
-
- struct work_struct tx_work;
- struct workqueue_struct *freezable_wq;
-
- /* Pending TX frames */
- unsigned long tx_frames_map[BITS_TO_LONGS(ACX_TX_DESCRIPTORS)];
- struct sk_buff *tx_frames[ACX_TX_DESCRIPTORS];
- int tx_frames_cnt;
-
- /* FW Rx counter */
- u32 rx_counter;
-
- /* Rx memory pool address */
- struct wl1271_rx_mem_pool_addr rx_mem_pool_addr;
-
- /* Intermediate buffer, used for packet aggregation */
- u8 *aggr_buf;
-
- /* Reusable dummy packet template */
- struct sk_buff *dummy_packet;
-
- /* Network stack work */
- struct work_struct netstack_work;
-
- /* FW log buffer */
- u8 *fwlog;
-
- /* Number of valid bytes in the FW log buffer */
- ssize_t fwlog_size;
-
- /* Sysfs FW log entry readers wait queue */
- wait_queue_head_t fwlog_waitq;
-
- /* Hardware recovery work */
- struct work_struct recovery_work;
-
- /* The mbox event mask */
- u32 event_mask;
-
- /* Mailbox pointers */
- u32 mbox_ptr[2];
-
- /* Are we currently scanning */
- struct ieee80211_vif *scan_vif;
- struct wl1271_scan scan;
- struct delayed_work scan_complete_work;
-
- bool sched_scanning;
-
- /* The current band */
- enum ieee80211_band band;
-
- struct completion *elp_compl;
- struct delayed_work elp_work;
-
- /* in dBm */
- int power_level;
-
- struct wl1271_stats stats;
-
- __le32 buffer_32;
- u32 buffer_cmd;
- u32 buffer_busyword[WL1271_BUSY_WORD_CNT];
-
- struct wl12xx_fw_status *fw_status;
- struct wl1271_tx_hw_res_if *tx_res_if;
-
- /* Current chipset configuration */
- struct conf_drv_settings conf;
-
- bool sg_enabled;
-
- bool enable_11a;
-
- /* Most recently reported noise in dBm */
- s8 noise;
-
- /* bands supported by this instance of wl12xx */
- struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
-
- int tcxo_clock;
-
- /*
- * wowlan trigger was configured during suspend.
- * (currently, only "ANY" trigger is supported)
- */
- bool wow_enabled;
- bool irq_wake_enabled;
-
- /*
- * AP-mode - links indexed by HLID. The global and broadcast links
- * are always active.
- */
- struct wl1271_link links[WL12XX_MAX_LINKS];
-
- /* AP-mode - a bitmap of links currently in PS mode according to FW */
- u32 ap_fw_ps_map;
-
- /* AP-mode - a bitmap of links currently in PS mode in mac80211 */
- unsigned long ap_ps_map;
-
- /* Quirks of specific hardware revisions */
- unsigned int quirks;
-
- /* Platform limitations */
- unsigned int platform_quirks;
-
- /* number of currently active RX BA sessions */
- int ba_rx_session_count;
-
- /* AP-mode - number of currently connected stations */
- int active_sta_count;
-
- /* last wlvif we transmitted from */
- struct wl12xx_vif *last_wlvif;
-
- /* work to fire when Tx is stuck */
- struct delayed_work tx_watchdog_work;
-};
-
struct wl1271_station {
u8 hlid;
};
@@ -605,6 +384,9 @@
struct work_struct rx_streaming_disable_work;
struct timer_list rx_streaming_timer;
+ /* does the current role use GEM for encryption (AP or STA) */
+ bool is_gem;
+
/*
* This struct must be last!
* data that has to be saved acrossed reconfigs (e.g. recovery)
@@ -679,17 +461,6 @@
#define HW_BG_RATES_MASK 0xffff
#define HW_HT_RATES_OFFSET 16
-/* Quirks */
-
-/* Each RX/TX transaction requires an end-of-transaction transfer */
-#define WL12XX_QUIRK_END_OF_TRANSACTION BIT(0)
-
-/* wl127x and SPI don't support SDIO block size alignment */
-#define WL12XX_QUIRK_NO_BLOCKSIZE_ALIGNMENT BIT(2)
-
-/* Older firmwares did not implement the FW logger over bus feature */
-#define WL12XX_QUIRK_FWLOG_NOT_IMPLEMENTED BIT(4)
-
#define WL12XX_HW_BLOCK_SIZE 256
#endif
diff --git a/drivers/net/wireless/wl12xx/wl12xx_80211.h b/drivers/net/wireless/ti/wlcore/wl12xx_80211.h
similarity index 100%
rename from drivers/net/wireless/wl12xx/wl12xx_80211.h
rename to drivers/net/wireless/ti/wlcore/wl12xx_80211.h
diff --git a/drivers/net/wireless/wl12xx/wl12xx_platform_data.c b/drivers/net/wireless/ti/wlcore/wl12xx_platform_data.c
similarity index 100%
rename from drivers/net/wireless/wl12xx/wl12xx_platform_data.c
rename to drivers/net/wireless/ti/wlcore/wl12xx_platform_data.c
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
new file mode 100644
index 0000000..39f9fad
--- /dev/null
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -0,0 +1,448 @@
+/*
+ * This file is part of wlcore
+ *
+ * Copyright (C) 2011 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WLCORE_H__
+#define __WLCORE_H__
+
+#include <linux/platform_device.h>
+
+#include "wl12xx.h"
+#include "event.h"
+
+/* The maximum number of Tx descriptors in all chip families */
+#define WLCORE_MAX_TX_DESCRIPTORS 32
+
+/* forward declaration */
+struct wl1271_tx_hw_descr;
+enum wl_rx_buf_align;
+
+struct wlcore_ops {
+ int (*identify_chip)(struct wl1271 *wl);
+ int (*identify_fw)(struct wl1271 *wl);
+ int (*boot)(struct wl1271 *wl);
+ void (*trigger_cmd)(struct wl1271 *wl, int cmd_box_addr,
+ void *buf, size_t len);
+ void (*ack_event)(struct wl1271 *wl);
+ u32 (*calc_tx_blocks)(struct wl1271 *wl, u32 len, u32 spare_blks);
+ void (*set_tx_desc_blocks)(struct wl1271 *wl,
+ struct wl1271_tx_hw_descr *desc,
+ u32 blks, u32 spare_blks);
+ void (*set_tx_desc_data_len)(struct wl1271 *wl,
+ struct wl1271_tx_hw_descr *desc,
+ struct sk_buff *skb);
+ enum wl_rx_buf_align (*get_rx_buf_align)(struct wl1271 *wl,
+ u32 rx_desc);
+ void (*prepare_read)(struct wl1271 *wl, u32 rx_desc, u32 len);
+ u32 (*get_rx_packet_len)(struct wl1271 *wl, void *rx_data,
+ u32 data_len);
+ void (*tx_delayed_compl)(struct wl1271 *wl);
+ void (*tx_immediate_compl)(struct wl1271 *wl);
+ int (*hw_init)(struct wl1271 *wl);
+ int (*init_vif)(struct wl1271 *wl, struct wl12xx_vif *wlvif);
+ u32 (*sta_get_ap_rate_mask)(struct wl1271 *wl,
+ struct wl12xx_vif *wlvif);
+ s8 (*get_pg_ver)(struct wl1271 *wl);
+ void (*get_mac)(struct wl1271 *wl);
+};
+
+enum wlcore_partitions {
+ PART_DOWN,
+ PART_WORK,
+ PART_BOOT,
+ PART_DRPW,
+ PART_TOP_PRCM_ELP_SOC,
+ PART_PHY_INIT,
+
+ PART_TABLE_LEN,
+};
+
+struct wlcore_partition {
+ u32 size;
+ u32 start;
+};
+
+struct wlcore_partition_set {
+ struct wlcore_partition mem;
+ struct wlcore_partition reg;
+ struct wlcore_partition mem2;
+ struct wlcore_partition mem3;
+};
+
+enum wlcore_registers {
+ /* register addresses, used with partition translation */
+ REG_ECPU_CONTROL,
+ REG_INTERRUPT_NO_CLEAR,
+ REG_INTERRUPT_ACK,
+ REG_COMMAND_MAILBOX_PTR,
+ REG_EVENT_MAILBOX_PTR,
+ REG_INTERRUPT_TRIG,
+ REG_INTERRUPT_MASK,
+ REG_PC_ON_RECOVERY,
+ REG_CHIP_ID_B,
+ REG_CMD_MBOX_ADDRESS,
+
+ /* data access memory addresses, used with partition translation */
+ REG_SLV_MEM_DATA,
+ REG_SLV_REG_DATA,
+
+ /* raw data access memory addresses */
+ REG_RAW_FW_STATUS_ADDR,
+
+ REG_TABLE_LEN,
+};
+
+struct wl1271 {
+ struct ieee80211_hw *hw;
+ bool mac80211_registered;
+
+ struct device *dev;
+
+ void *if_priv;
+
+ struct wl1271_if_operations *if_ops;
+
+ void (*set_power)(bool enable);
+ int irq;
+ int ref_clock;
+
+ spinlock_t wl_lock;
+
+ enum wl1271_state state;
+ enum wl12xx_fw_type fw_type;
+ bool plt;
+ u8 last_vif_count;
+ struct mutex mutex;
+
+ unsigned long flags;
+
+ struct wlcore_partition_set curr_part;
+
+ struct wl1271_chip chip;
+
+ int cmd_box_addr;
+
+ u8 *fw;
+ size_t fw_len;
+ void *nvs;
+ size_t nvs_len;
+
+ s8 hw_pg_ver;
+
+ /* address read from the fuse ROM */
+ u32 fuse_oui_addr;
+ u32 fuse_nic_addr;
+
+ /* we have up to 2 MAC addresses */
+ struct mac_address addresses[2];
+ int channel;
+ u8 system_hlid;
+
+ unsigned long links_map[BITS_TO_LONGS(WL12XX_MAX_LINKS)];
+ unsigned long roles_map[BITS_TO_LONGS(WL12XX_MAX_ROLES)];
+ unsigned long roc_map[BITS_TO_LONGS(WL12XX_MAX_ROLES)];
+ unsigned long rate_policies_map[
+ BITS_TO_LONGS(WL12XX_MAX_RATE_POLICIES)];
+
+ struct list_head wlvif_list;
+
+ u8 sta_count;
+ u8 ap_count;
+
+ struct wl1271_acx_mem_map *target_mem_map;
+
+ /* Accounting for allocated / available TX blocks on HW */
+ u32 tx_blocks_freed;
+ u32 tx_blocks_available;
+ u32 tx_allocated_blocks;
+ u32 tx_results_count;
+
+ /* Accounting for allocated / available Tx packets in HW */
+ u32 tx_pkts_freed[NUM_TX_QUEUES];
+ u32 tx_allocated_pkts[NUM_TX_QUEUES];
+
+ /* Transmitted TX packets counter for chipset interface */
+ u32 tx_packets_count;
+
+ /* Time-offset between host and chipset clocks */
+ s64 time_offset;
+
+ /* Frames scheduled for transmission, not handled yet */
+ int tx_queue_count[NUM_TX_QUEUES];
+ long stopped_queues_map;
+
+ /* Frames received, not handled yet by mac80211 */
+ struct sk_buff_head deferred_rx_queue;
+
+ /* Frames sent, not returned yet to mac80211 */
+ struct sk_buff_head deferred_tx_queue;
+
+ struct work_struct tx_work;
+ struct workqueue_struct *freezable_wq;
+
+ /* Pending TX frames */
+ unsigned long tx_frames_map[BITS_TO_LONGS(WLCORE_MAX_TX_DESCRIPTORS)];
+ struct sk_buff *tx_frames[WLCORE_MAX_TX_DESCRIPTORS];
+ int tx_frames_cnt;
+
+ /* FW Rx counter */
+ u32 rx_counter;
+
+ /* Rx memory pool address */
+ struct wl1271_rx_mem_pool_addr rx_mem_pool_addr;
+
+ /* Intermediate buffer, used for packet aggregation */
+ u8 *aggr_buf;
+
+ /* Reusable dummy packet template */
+ struct sk_buff *dummy_packet;
+
+ /* Network stack work */
+ struct work_struct netstack_work;
+
+ /* FW log buffer */
+ u8 *fwlog;
+
+ /* Number of valid bytes in the FW log buffer */
+ ssize_t fwlog_size;
+
+ /* Sysfs FW log entry readers wait queue */
+ wait_queue_head_t fwlog_waitq;
+
+ /* Hardware recovery work */
+ struct work_struct recovery_work;
+
+ /* Pointer that holds DMA-friendly block for the mailbox */
+ struct event_mailbox *mbox;
+
+ /* The mbox event mask */
+ u32 event_mask;
+
+ /* Mailbox pointers */
+ u32 mbox_ptr[2];
+
+ /* Are we currently scanning */
+ struct ieee80211_vif *scan_vif;
+ struct wl1271_scan scan;
+ struct delayed_work scan_complete_work;
+
+ bool sched_scanning;
+
+ /* The current band */
+ enum ieee80211_band band;
+
+ struct completion *elp_compl;
+ struct delayed_work elp_work;
+
+ /* in dBm */
+ int power_level;
+
+ struct wl1271_stats stats;
+
+ __le32 buffer_32;
+ u32 buffer_cmd;
+ u32 buffer_busyword[WL1271_BUSY_WORD_CNT];
+
+ struct wl_fw_status *fw_status;
+ struct wl1271_tx_hw_res_if *tx_res_if;
+
+ /* Current chipset configuration */
+ struct wlcore_conf conf;
+
+ bool sg_enabled;
+
+ bool enable_11a;
+
+ /* Most recently reported noise in dBm */
+ s8 noise;
+
+ /* bands supported by this instance of wl12xx */
+ struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
+
+ int tcxo_clock;
+
+ /*
+ * wowlan trigger was configured during suspend.
+ * (currently, only "ANY" trigger is supported)
+ */
+ bool wow_enabled;
+ bool irq_wake_enabled;
+
+ /*
+ * AP-mode - links indexed by HLID. The global and broadcast links
+ * are always active.
+ */
+ struct wl1271_link links[WL12XX_MAX_LINKS];
+
+ /* AP-mode - a bitmap of links currently in PS mode according to FW */
+ u32 ap_fw_ps_map;
+
+ /* AP-mode - a bitmap of links currently in PS mode in mac80211 */
+ unsigned long ap_ps_map;
+
+ /* Quirks of specific hardware revisions */
+ unsigned int quirks;
+
+ /* Platform limitations */
+ unsigned int platform_quirks;
+
+ /* number of currently active RX BA sessions */
+ int ba_rx_session_count;
+
+ /* AP-mode - number of currently connected stations */
+ int active_sta_count;
+
+ /* last wlvif we transmitted from */
+ struct wl12xx_vif *last_wlvif;
+
+ /* work to fire when Tx is stuck */
+ struct delayed_work tx_watchdog_work;
+
+ struct wlcore_ops *ops;
+ /* pointer to the lower driver partition table */
+ const struct wlcore_partition_set *ptable;
+ /* pointer to the lower driver register table */
+ const int *rtable;
+ /* name of the firmwares to load - for PLT, single role, multi-role */
+ const char *plt_fw_name;
+ const char *sr_fw_name;
+ const char *mr_fw_name;
+
+ /* per-chip-family private structure */
+ void *priv;
+
+ /* number of TX descriptors the HW supports. */
+ u32 num_tx_desc;
+
+ /* spare Tx blocks for normal/GEM operating modes */
+ u32 normal_tx_spare;
+ u32 gem_tx_spare;
+
+ /* translate HW Tx rates to standard rate-indices */
+ const u8 **band_rate_to_idx;
+
+ /* size of table for HW rates that can be received from chip */
+ u8 hw_tx_rate_tbl_size;
+
+ /* this HW rate and below are considered HT rates for this chip */
+ u8 hw_min_ht_rate;
+
+ /* HW HT (11n) capabilities */
+ struct ieee80211_sta_ht_cap ht_cap;
+
+ /* size of the private FW status data */
+ size_t fw_status_priv_len;
+};
+
+int __devinit wlcore_probe(struct wl1271 *wl, struct platform_device *pdev);
+int __devexit wlcore_remove(struct platform_device *pdev);
+struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size);
+int wlcore_free_hw(struct wl1271 *wl);
+
+/* Firmware image load chunk size */
+#define CHUNK_SIZE 16384
+
+/* Quirks */
+
+/* Each RX/TX transaction requires an end-of-transaction transfer */
+#define WLCORE_QUIRK_END_OF_TRANSACTION BIT(0)
+
+/* wl127x and SPI don't support SDIO block size alignment */
+#define WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN BIT(2)
+
+/* means aggregated Rx packets are aligned to a SDIO block */
+#define WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN BIT(3)
+
+/* Older firmwares did not implement the FW logger over bus feature */
+#define WLCORE_QUIRK_FWLOG_NOT_IMPLEMENTED BIT(4)
+
+/* Older firmwares use an old NVS format */
+#define WLCORE_QUIRK_LEGACY_NVS BIT(5)
+
+/* Some firmwares may not support ELP */
+#define WLCORE_QUIRK_NO_ELP BIT(6)
+
+/* TODO: move to the lower drivers when all usages are abstracted */
+#define CHIP_ID_1271_PG10 (0x4030101)
+#define CHIP_ID_1271_PG20 (0x4030111)
+#define CHIP_ID_1283_PG10 (0x05030101)
+#define CHIP_ID_1283_PG20 (0x05030111)
+
+/* TODO: move all these common registers and values elsewhere */
+#define HW_ACCESS_ELP_CTRL_REG 0x1FFFC
+
+/* ELP register commands */
+#define ELPCTRL_WAKE_UP 0x1
+#define ELPCTRL_WAKE_UP_WLAN_READY 0x5
+#define ELPCTRL_SLEEP 0x0
+/* ELP WLAN_READY bit */
+#define ELPCTRL_WLAN_READY 0x2
+
+/*************************************************************************
+
+ Interrupt Trigger Register (Host -> WiLink)
+
+**************************************************************************/
+
+/* Hardware to Embedded CPU Interrupts - first 32-bit register set */
+
+/*
+ * The host sets this bit to inform the Wlan
+ * FW that a TX packet is in the XFER
+ * Buffer #0.
+ */
+#define INTR_TRIG_TX_PROC0 BIT(2)
+
+/*
+ * The host sets this bit to inform the FW
+ * that it read a packet from RX XFER
+ * Buffer #0.
+ */
+#define INTR_TRIG_RX_PROC0 BIT(3)
+
+#define INTR_TRIG_DEBUG_ACK BIT(4)
+
+#define INTR_TRIG_STATE_CHANGED BIT(5)
+
+/* Hardware to Embedded CPU Interrupts - second 32-bit register set */
+
+/*
+ * The host sets this bit to inform the FW
+ * that it read a packet from RX XFER
+ * Buffer #1.
+ */
+#define INTR_TRIG_RX_PROC1 BIT(17)
+
+/*
+ * The host sets this bit to inform the Wlan
+ * hardware that a TX packet is in the XFER
+ * Buffer #1.
+ */
+#define INTR_TRIG_TX_PROC1 BIT(18)
+
+#define ACX_SLV_SOFT_RESET_BIT BIT(1)
+#define SOFT_RESET_MAX_TIME 1000000
+#define SOFT_RESET_STALL_TIME 1000
+
+#define ECPU_CONTROL_HALT 0x00000101
+
+#define WELP_ARM_COMMAND_VAL 0x4
+
+#endif /* __WLCORE_H__ */
diff --git a/drivers/net/wireless/wl12xx/Kconfig b/drivers/net/wireless/wl12xx/Kconfig
deleted file mode 100644
index af08c86..0000000
--- a/drivers/net/wireless/wl12xx/Kconfig
+++ /dev/null
@@ -1,48 +0,0 @@
-menuconfig WL12XX_MENU
- tristate "TI wl12xx driver support"
- depends on MAC80211 && EXPERIMENTAL
- ---help---
- This will enable TI wl12xx driver support for the following chips:
- wl1271, wl1273, wl1281 and wl1283.
- The drivers make use of the mac80211 stack.
-
-config WL12XX
- tristate "TI wl12xx support"
- depends on WL12XX_MENU && GENERIC_HARDIRQS
- depends on INET
- select FW_LOADER
- ---help---
- This module adds support for wireless adapters based on TI wl1271 and
- TI wl1273 chipsets. This module does *not* include support for wl1251.
- For wl1251 support, use the separate homonymous driver instead.
-
- If you choose to build a module, it will be called wl12xx. Say N if
- unsure.
-
-config WL12XX_SPI
- tristate "TI wl12xx SPI support"
- depends on WL12XX && SPI_MASTER
- select CRC7
- ---help---
- This module adds support for the SPI interface of adapters using
- TI wl12xx chipsets. Select this if your platform is using
- the SPI bus.
-
- If you choose to build a module, it'll be called wl12xx_spi.
- Say N if unsure.
-
-config WL12XX_SDIO
- tristate "TI wl12xx SDIO support"
- depends on WL12XX && MMC
- ---help---
- This module adds support for the SDIO interface of adapters using
- TI wl12xx chipsets. Select this if your platform is using
- the SDIO bus.
-
- If you choose to build a module, it'll be called wl12xx_sdio.
- Say N if unsure.
-
-config WL12XX_PLATFORM_DATA
- bool
- depends on WL12XX_SDIO != n || WL1251_SDIO != n
- default y
diff --git a/drivers/net/wireless/wl12xx/Makefile b/drivers/net/wireless/wl12xx/Makefile
deleted file mode 100644
index 98f289c..0000000
--- a/drivers/net/wireless/wl12xx/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-wl12xx-objs = main.o cmd.o io.o event.o tx.o rx.o ps.o acx.o \
- boot.o init.o debugfs.o scan.o
-
-wl12xx_spi-objs = spi.o
-wl12xx_sdio-objs = sdio.o
-
-wl12xx-$(CONFIG_NL80211_TESTMODE) += testmode.o
-obj-$(CONFIG_WL12XX) += wl12xx.o
-obj-$(CONFIG_WL12XX_SPI) += wl12xx_spi.o
-obj-$(CONFIG_WL12XX_SDIO) += wl12xx_sdio.o
-
-# small builtin driver bit
-obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wl12xx_platform_data.o
-
-ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
deleted file mode 100644
index 954101d..0000000
--- a/drivers/net/wireless/wl12xx/boot.c
+++ /dev/null
@@ -1,786 +0,0 @@
-/*
- * This file is part of wl1271
- *
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Contact: Luciano Coelho <luciano.coelho@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/slab.h>
-#include <linux/wl12xx.h>
-#include <linux/export.h>
-
-#include "debug.h"
-#include "acx.h"
-#include "reg.h"
-#include "boot.h"
-#include "io.h"
-#include "event.h"
-#include "rx.h"
-
-static void wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag)
-{
- u32 cpu_ctrl;
-
- /* 10.5.0 run the firmware (I) */
- cpu_ctrl = wl1271_read32(wl, ACX_REG_ECPU_CONTROL);
-
- /* 10.5.1 run the firmware (II) */
- cpu_ctrl |= flag;
- wl1271_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl);
-}
-
-static unsigned int wl12xx_get_fw_ver_quirks(struct wl1271 *wl)
-{
- unsigned int quirks = 0;
- unsigned int *fw_ver = wl->chip.fw_ver;
-
- /* Only new station firmwares support routing fw logs to the host */
- if ((fw_ver[FW_VER_IF_TYPE] == FW_VER_IF_TYPE_STA) &&
- (fw_ver[FW_VER_MINOR] < FW_VER_MINOR_FWLOG_STA_MIN))
- quirks |= WL12XX_QUIRK_FWLOG_NOT_IMPLEMENTED;
-
- /* This feature is not yet supported for AP mode */
- if (fw_ver[FW_VER_IF_TYPE] == FW_VER_IF_TYPE_AP)
- quirks |= WL12XX_QUIRK_FWLOG_NOT_IMPLEMENTED;
-
- return quirks;
-}
-
-static void wl1271_parse_fw_ver(struct wl1271 *wl)
-{
- int ret;
-
- ret = sscanf(wl->chip.fw_ver_str + 4, "%u.%u.%u.%u.%u",
- &wl->chip.fw_ver[0], &wl->chip.fw_ver[1],
- &wl->chip.fw_ver[2], &wl->chip.fw_ver[3],
- &wl->chip.fw_ver[4]);
-
- if (ret != 5) {
- wl1271_warning("fw version incorrect value");
- memset(wl->chip.fw_ver, 0, sizeof(wl->chip.fw_ver));
- return;
- }
-
- /* Check if any quirks are needed with older fw versions */
- wl->quirks |= wl12xx_get_fw_ver_quirks(wl);
-}
-
-static void wl1271_boot_fw_version(struct wl1271 *wl)
-{
- struct wl1271_static_data static_data;
-
- wl1271_read(wl, wl->cmd_box_addr, &static_data, sizeof(static_data),
- false);
-
- strncpy(wl->chip.fw_ver_str, static_data.fw_version,
- sizeof(wl->chip.fw_ver_str));
-
- /* make sure the string is NULL-terminated */
- wl->chip.fw_ver_str[sizeof(wl->chip.fw_ver_str) - 1] = '\0';
-
- wl1271_parse_fw_ver(wl);
-}
-
-static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
- size_t fw_data_len, u32 dest)
-{
- struct wl1271_partition_set partition;
- int addr, chunk_num, partition_limit;
- u8 *p, *chunk;
-
- /* whal_FwCtrl_LoadFwImageSm() */
-
- wl1271_debug(DEBUG_BOOT, "starting firmware upload");
-
- wl1271_debug(DEBUG_BOOT, "fw_data_len %zd chunk_size %d",
- fw_data_len, CHUNK_SIZE);
-
- if ((fw_data_len % 4) != 0) {
- wl1271_error("firmware length not multiple of four");
- return -EIO;
- }
-
- chunk = kmalloc(CHUNK_SIZE, GFP_KERNEL);
- if (!chunk) {
- wl1271_error("allocation for firmware upload chunk failed");
- return -ENOMEM;
- }
-
- memcpy(&partition, &wl12xx_part_table[PART_DOWN], sizeof(partition));
- partition.mem.start = dest;
- wl1271_set_partition(wl, &partition);
-
- /* 10.1 set partition limit and chunk num */
- chunk_num = 0;
- partition_limit = wl12xx_part_table[PART_DOWN].mem.size;
-
- while (chunk_num < fw_data_len / CHUNK_SIZE) {
- /* 10.2 update partition, if needed */
- addr = dest + (chunk_num + 2) * CHUNK_SIZE;
- if (addr > partition_limit) {
- addr = dest + chunk_num * CHUNK_SIZE;
- partition_limit = chunk_num * CHUNK_SIZE +
- wl12xx_part_table[PART_DOWN].mem.size;
- partition.mem.start = addr;
- wl1271_set_partition(wl, &partition);
- }
-
- /* 10.3 upload the chunk */
- addr = dest + chunk_num * CHUNK_SIZE;
- p = buf + chunk_num * CHUNK_SIZE;
- memcpy(chunk, p, CHUNK_SIZE);
- wl1271_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
- p, addr);
- wl1271_write(wl, addr, chunk, CHUNK_SIZE, false);
-
- chunk_num++;
- }
-
- /* 10.4 upload the last chunk */
- addr = dest + chunk_num * CHUNK_SIZE;
- p = buf + chunk_num * CHUNK_SIZE;
- memcpy(chunk, p, fw_data_len % CHUNK_SIZE);
- wl1271_debug(DEBUG_BOOT, "uploading fw last chunk (%zd B) 0x%p to 0x%x",
- fw_data_len % CHUNK_SIZE, p, addr);
- wl1271_write(wl, addr, chunk, fw_data_len % CHUNK_SIZE, false);
-
- kfree(chunk);
- return 0;
-}
-
-static int wl1271_boot_upload_firmware(struct wl1271 *wl)
-{
- u32 chunks, addr, len;
- int ret = 0;
- u8 *fw;
-
- fw = wl->fw;
- chunks = be32_to_cpup((__be32 *) fw);
- fw += sizeof(u32);
-
- wl1271_debug(DEBUG_BOOT, "firmware chunks to be uploaded: %u", chunks);
-
- while (chunks--) {
- addr = be32_to_cpup((__be32 *) fw);
- fw += sizeof(u32);
- len = be32_to_cpup((__be32 *) fw);
- fw += sizeof(u32);
-
- if (len > 300000) {
- wl1271_info("firmware chunk too long: %u", len);
- return -EINVAL;
- }
- wl1271_debug(DEBUG_BOOT, "chunk %d addr 0x%x len %u",
- chunks, addr, len);
- ret = wl1271_boot_upload_firmware_chunk(wl, fw, len, addr);
- if (ret != 0)
- break;
- fw += len;
- }
-
- return ret;
-}
-
-static int wl1271_boot_upload_nvs(struct wl1271 *wl)
-{
- size_t nvs_len, burst_len;
- int i;
- u32 dest_addr, val;
- u8 *nvs_ptr, *nvs_aligned;
-
- if (wl->nvs == NULL)
- return -ENODEV;
-
- if (wl->chip.id == CHIP_ID_1283_PG20) {
- struct wl128x_nvs_file *nvs = (struct wl128x_nvs_file *)wl->nvs;
-
- if (wl->nvs_len == sizeof(struct wl128x_nvs_file)) {
- if (nvs->general_params.dual_mode_select)
- wl->enable_11a = true;
- } else {
- wl1271_error("nvs size is not as expected: %zu != %zu",
- wl->nvs_len,
- sizeof(struct wl128x_nvs_file));
- kfree(wl->nvs);
- wl->nvs = NULL;
- wl->nvs_len = 0;
- return -EILSEQ;
- }
-
- /* only the first part of the NVS needs to be uploaded */
- nvs_len = sizeof(nvs->nvs);
- nvs_ptr = (u8 *)nvs->nvs;
-
- } else {
- struct wl1271_nvs_file *nvs =
- (struct wl1271_nvs_file *)wl->nvs;
- /*
- * FIXME: the LEGACY NVS image support (NVS's missing the 5GHz
- * band configurations) can be removed when those NVS files stop
- * floating around.
- */
- if (wl->nvs_len == sizeof(struct wl1271_nvs_file) ||
- wl->nvs_len == WL1271_INI_LEGACY_NVS_FILE_SIZE) {
- if (nvs->general_params.dual_mode_select)
- wl->enable_11a = true;
- }
-
- if (wl->nvs_len != sizeof(struct wl1271_nvs_file) &&
- (wl->nvs_len != WL1271_INI_LEGACY_NVS_FILE_SIZE ||
- wl->enable_11a)) {
- wl1271_error("nvs size is not as expected: %zu != %zu",
- wl->nvs_len, sizeof(struct wl1271_nvs_file));
- kfree(wl->nvs);
- wl->nvs = NULL;
- wl->nvs_len = 0;
- return -EILSEQ;
- }
-
- /* only the first part of the NVS needs to be uploaded */
- nvs_len = sizeof(nvs->nvs);
- nvs_ptr = (u8 *) nvs->nvs;
- }
-
- /* update current MAC address to NVS */
- nvs_ptr[11] = wl->addresses[0].addr[0];
- nvs_ptr[10] = wl->addresses[0].addr[1];
- nvs_ptr[6] = wl->addresses[0].addr[2];
- nvs_ptr[5] = wl->addresses[0].addr[3];
- nvs_ptr[4] = wl->addresses[0].addr[4];
- nvs_ptr[3] = wl->addresses[0].addr[5];
-
- /*
- * Layout before the actual NVS tables:
- * 1 byte : burst length.
- * 2 bytes: destination address.
- * n bytes: data to burst copy.
- *
- * This is ended by a 0 length, then the NVS tables.
- */
-
- /* FIXME: Do we need to check here whether the LSB is 1? */
- while (nvs_ptr[0]) {
- burst_len = nvs_ptr[0];
- dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8));
-
- /*
- * Due to our new wl1271_translate_reg_addr function,
- * we need to add the REGISTER_BASE to the destination
- */
- dest_addr += REGISTERS_BASE;
-
- /* We move our pointer to the data */
- nvs_ptr += 3;
-
- for (i = 0; i < burst_len; i++) {
- if (nvs_ptr + 3 >= (u8 *) wl->nvs + nvs_len)
- goto out_badnvs;
-
- val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
- | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
-
- wl1271_debug(DEBUG_BOOT,
- "nvs burst write 0x%x: 0x%x",
- dest_addr, val);
- wl1271_write32(wl, dest_addr, val);
-
- nvs_ptr += 4;
- dest_addr += 4;
- }
-
- if (nvs_ptr >= (u8 *) wl->nvs + nvs_len)
- goto out_badnvs;
- }
-
- /*
- * We've reached the first zero length, the first NVS table
- * is located at an aligned offset which is at least 7 bytes further.
- * NOTE: The wl->nvs->nvs element must be first, in order to
- * simplify the casting, we assume it is at the beginning of
- * the wl->nvs structure.
- */
- nvs_ptr = (u8 *)wl->nvs +
- ALIGN(nvs_ptr - (u8 *)wl->nvs + 7, 4);
-
- if (nvs_ptr >= (u8 *) wl->nvs + nvs_len)
- goto out_badnvs;
-
- nvs_len -= nvs_ptr - (u8 *)wl->nvs;
-
- /* Now we must set the partition correctly */
- wl1271_set_partition(wl, &wl12xx_part_table[PART_WORK]);
-
- /* Copy the NVS tables to a new block to ensure alignment */
- nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL);
- if (!nvs_aligned)
- return -ENOMEM;
-
- /* And finally we upload the NVS tables */
- wl1271_write(wl, CMD_MBOX_ADDRESS, nvs_aligned, nvs_len, false);
-
- kfree(nvs_aligned);
- return 0;
-
-out_badnvs:
- wl1271_error("nvs data is malformed");
- return -EILSEQ;
-}
-
-static void wl1271_boot_enable_interrupts(struct wl1271 *wl)
-{
- wl1271_enable_interrupts(wl);
- wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
- WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK));
- wl1271_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
-}
-
-static int wl1271_boot_soft_reset(struct wl1271 *wl)
-{
- unsigned long timeout;
- u32 boot_data;
-
- /* perform soft reset */
- wl1271_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
-
- /* SOFT_RESET is self clearing */
- timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
- while (1) {
- boot_data = wl1271_read32(wl, ACX_REG_SLV_SOFT_RESET);
- wl1271_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
- if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
- break;
-
- if (time_after(jiffies, timeout)) {
- /* 1.2 check pWhalBus->uSelfClearTime if the
- * timeout was reached */
- wl1271_error("soft reset timeout");
- return -1;
- }
-
- udelay(SOFT_RESET_STALL_TIME);
- }
-
- /* disable Rx/Tx */
- wl1271_write32(wl, ENABLE, 0x0);
-
- /* disable auto calibration on start*/
- wl1271_write32(wl, SPARE_A2, 0xffff);
-
- return 0;
-}
-
-static int wl1271_boot_run_firmware(struct wl1271 *wl)
-{
- int loop, ret;
- u32 chip_id, intr;
-
- wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
-
- chip_id = wl1271_read32(wl, CHIP_ID_B);
-
- wl1271_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
-
- if (chip_id != wl->chip.id) {
- wl1271_error("chip id doesn't match after firmware boot");
- return -EIO;
- }
-
- /* wait for init to complete */
- loop = 0;
- while (loop++ < INIT_LOOP) {
- udelay(INIT_LOOP_DELAY);
- intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
-
- if (intr == 0xffffffff) {
- wl1271_error("error reading hardware complete "
- "init indication");
- return -EIO;
- }
- /* check that ACX_INTR_INIT_COMPLETE is enabled */
- else if (intr & WL1271_ACX_INTR_INIT_COMPLETE) {
- wl1271_write32(wl, ACX_REG_INTERRUPT_ACK,
- WL1271_ACX_INTR_INIT_COMPLETE);
- break;
- }
- }
-
- if (loop > INIT_LOOP) {
- wl1271_error("timeout waiting for the hardware to "
- "complete initialization");
- return -EIO;
- }
-
- /* get hardware config command mail box */
- wl->cmd_box_addr = wl1271_read32(wl, REG_COMMAND_MAILBOX_PTR);
-
- /* get hardware config event mail box */
- wl->event_box_addr = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR);
-
- /* set the working partition to its "running" mode offset */
- wl1271_set_partition(wl, &wl12xx_part_table[PART_WORK]);
-
- wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x",
- wl->cmd_box_addr, wl->event_box_addr);
-
- wl1271_boot_fw_version(wl);
-
- /*
- * in case of full asynchronous mode the firmware event must be
- * ready to receive event from the command mailbox
- */
-
- /* unmask required mbox events */
- wl->event_mask = BSS_LOSE_EVENT_ID |
- SCAN_COMPLETE_EVENT_ID |
- ROLE_STOP_COMPLETE_EVENT_ID |
- RSSI_SNR_TRIGGER_0_EVENT_ID |
- PSPOLL_DELIVERY_FAILURE_EVENT_ID |
- SOFT_GEMINI_SENSE_EVENT_ID |
- PERIODIC_SCAN_REPORT_EVENT_ID |
- PERIODIC_SCAN_COMPLETE_EVENT_ID |
- DUMMY_PACKET_EVENT_ID |
- PEER_REMOVE_COMPLETE_EVENT_ID |
- BA_SESSION_RX_CONSTRAINT_EVENT_ID |
- REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID |
- INACTIVE_STA_EVENT_ID |
- MAX_TX_RETRY_EVENT_ID |
- CHANNEL_SWITCH_COMPLETE_EVENT_ID;
-
- ret = wl1271_event_unmask(wl);
- if (ret < 0) {
- wl1271_error("EVENT mask setting failed");
- return ret;
- }
-
- wl1271_event_mbox_config(wl);
-
- /* firmware startup completed */
- return 0;
-}
-
-static int wl1271_boot_write_irq_polarity(struct wl1271 *wl)
-{
- u32 polarity;
-
- polarity = wl1271_top_reg_read(wl, OCP_REG_POLARITY);
-
- /* We use HIGH polarity, so unset the LOW bit */
- polarity &= ~POLARITY_LOW;
- wl1271_top_reg_write(wl, OCP_REG_POLARITY, polarity);
-
- return 0;
-}
-
-static int wl128x_switch_tcxo_to_fref(struct wl1271 *wl)
-{
- u16 spare_reg;
-
- /* Mask bits [2] & [8:4] in the sys_clk_cfg register */
- spare_reg = wl1271_top_reg_read(wl, WL_SPARE_REG);
- if (spare_reg == 0xFFFF)
- return -EFAULT;
- spare_reg |= (BIT(3) | BIT(5) | BIT(6));
- wl1271_top_reg_write(wl, WL_SPARE_REG, spare_reg);
-
- /* Enable FREF_CLK_REQ & mux MCS and coex PLLs to FREF */
- wl1271_top_reg_write(wl, SYS_CLK_CFG_REG,
- WL_CLK_REQ_TYPE_PG2 | MCS_PLL_CLK_SEL_FREF);
-
- /* Delay execution for 15msec, to let the HW settle */
- mdelay(15);
-
- return 0;
-}
-
-static bool wl128x_is_tcxo_valid(struct wl1271 *wl)
-{
- u16 tcxo_detection;
-
- tcxo_detection = wl1271_top_reg_read(wl, TCXO_CLK_DETECT_REG);
- if (tcxo_detection & TCXO_DET_FAILED)
- return false;
-
- return true;
-}
-
-static bool wl128x_is_fref_valid(struct wl1271 *wl)
-{
- u16 fref_detection;
-
- fref_detection = wl1271_top_reg_read(wl, FREF_CLK_DETECT_REG);
- if (fref_detection & FREF_CLK_DETECT_FAIL)
- return false;
-
- return true;
-}
-
-static int wl128x_manually_configure_mcs_pll(struct wl1271 *wl)
-{
- wl1271_top_reg_write(wl, MCS_PLL_M_REG, MCS_PLL_M_REG_VAL);
- wl1271_top_reg_write(wl, MCS_PLL_N_REG, MCS_PLL_N_REG_VAL);
- wl1271_top_reg_write(wl, MCS_PLL_CONFIG_REG, MCS_PLL_CONFIG_REG_VAL);
-
- return 0;
-}
-
-static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk)
-{
- u16 spare_reg;
- u16 pll_config;
- u8 input_freq;
-
- /* Mask bits [3:1] in the sys_clk_cfg register */
- spare_reg = wl1271_top_reg_read(wl, WL_SPARE_REG);
- if (spare_reg == 0xFFFF)
- return -EFAULT;
- spare_reg |= BIT(2);
- wl1271_top_reg_write(wl, WL_SPARE_REG, spare_reg);
-
- /* Handle special cases of the TCXO clock */
- if (wl->tcxo_clock == WL12XX_TCXOCLOCK_16_8 ||
- wl->tcxo_clock == WL12XX_TCXOCLOCK_33_6)
- return wl128x_manually_configure_mcs_pll(wl);
-
- /* Set the input frequency according to the selected clock source */
- input_freq = (clk & 1) + 1;
-
- pll_config = wl1271_top_reg_read(wl, MCS_PLL_CONFIG_REG);
- if (pll_config == 0xFFFF)
- return -EFAULT;
- pll_config |= (input_freq << MCS_SEL_IN_FREQ_SHIFT);
- pll_config |= MCS_PLL_ENABLE_HP;
- wl1271_top_reg_write(wl, MCS_PLL_CONFIG_REG, pll_config);
-
- return 0;
-}
-
-/*
- * WL128x has two clocks input - TCXO and FREF.
- * TCXO is the main clock of the device, while FREF is used to sync
- * between the GPS and the cellular modem.
- * In cases where TCXO is 32.736MHz or 16.368MHz, the FREF will be used
- * as the WLAN/BT main clock.
- */
-static int wl128x_boot_clk(struct wl1271 *wl, int *selected_clock)
-{
- u16 sys_clk_cfg;
-
- /* For XTAL-only modes, FREF will be used after switching from TCXO */
- if (wl->ref_clock == WL12XX_REFCLOCK_26_XTAL ||
- wl->ref_clock == WL12XX_REFCLOCK_38_XTAL) {
- if (!wl128x_switch_tcxo_to_fref(wl))
- return -EINVAL;
- goto fref_clk;
- }
-
- /* Query the HW, to determine which clock source we should use */
- sys_clk_cfg = wl1271_top_reg_read(wl, SYS_CLK_CFG_REG);
- if (sys_clk_cfg == 0xFFFF)
- return -EINVAL;
- if (sys_clk_cfg & PRCM_CM_EN_MUX_WLAN_FREF)
- goto fref_clk;
-
- /* If TCXO is either 32.736MHz or 16.368MHz, switch to FREF */
- if (wl->tcxo_clock == WL12XX_TCXOCLOCK_16_368 ||
- wl->tcxo_clock == WL12XX_TCXOCLOCK_32_736) {
- if (!wl128x_switch_tcxo_to_fref(wl))
- return -EINVAL;
- goto fref_clk;
- }
-
- /* TCXO clock is selected */
- if (!wl128x_is_tcxo_valid(wl))
- return -EINVAL;
- *selected_clock = wl->tcxo_clock;
- goto config_mcs_pll;
-
-fref_clk:
- /* FREF clock is selected */
- if (!wl128x_is_fref_valid(wl))
- return -EINVAL;
- *selected_clock = wl->ref_clock;
-
-config_mcs_pll:
- return wl128x_configure_mcs_pll(wl, *selected_clock);
-}
-
-static int wl127x_boot_clk(struct wl1271 *wl)
-{
- u32 pause;
- u32 clk;
-
- if (WL127X_PG_GET_MAJOR(wl->hw_pg_ver) < 3)
- wl->quirks |= WL12XX_QUIRK_END_OF_TRANSACTION;
-
- if (wl->ref_clock == CONF_REF_CLK_19_2_E ||
- wl->ref_clock == CONF_REF_CLK_38_4_E ||
- wl->ref_clock == CONF_REF_CLK_38_4_M_XTAL)
- /* ref clk: 19.2/38.4/38.4-XTAL */
- clk = 0x3;
- else if (wl->ref_clock == CONF_REF_CLK_26_E ||
- wl->ref_clock == CONF_REF_CLK_52_E)
- /* ref clk: 26/52 */
- clk = 0x5;
- else
- return -EINVAL;
-
- if (wl->ref_clock != CONF_REF_CLK_19_2_E) {
- u16 val;
- /* Set clock type (open drain) */
- val = wl1271_top_reg_read(wl, OCP_REG_CLK_TYPE);
- val &= FREF_CLK_TYPE_BITS;
- wl1271_top_reg_write(wl, OCP_REG_CLK_TYPE, val);
-
- /* Set clock pull mode (no pull) */
- val = wl1271_top_reg_read(wl, OCP_REG_CLK_PULL);
- val |= NO_PULL;
- wl1271_top_reg_write(wl, OCP_REG_CLK_PULL, val);
- } else {
- u16 val;
- /* Set clock polarity */
- val = wl1271_top_reg_read(wl, OCP_REG_CLK_POLARITY);
- val &= FREF_CLK_POLARITY_BITS;
- val |= CLK_REQ_OUTN_SEL;
- wl1271_top_reg_write(wl, OCP_REG_CLK_POLARITY, val);
- }
-
- wl1271_write32(wl, PLL_PARAMETERS, clk);
-
- pause = wl1271_read32(wl, PLL_PARAMETERS);
-
- wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause);
-
- pause &= ~(WU_COUNTER_PAUSE_VAL);
- pause |= WU_COUNTER_PAUSE_VAL;
- wl1271_write32(wl, WU_COUNTER_PAUSE, pause);
-
- return 0;
-}
-
-/* uploads NVS and firmware */
-int wl1271_load_firmware(struct wl1271 *wl)
-{
- int ret = 0;
- u32 tmp, clk;
- int selected_clock = -1;
-
- if (wl->chip.id == CHIP_ID_1283_PG20) {
- ret = wl128x_boot_clk(wl, &selected_clock);
- if (ret < 0)
- goto out;
- } else {
- ret = wl127x_boot_clk(wl);
- if (ret < 0)
- goto out;
- }
-
- /* Continue the ELP wake up sequence */
- wl1271_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
- udelay(500);
-
- wl1271_set_partition(wl, &wl12xx_part_table[PART_DRPW]);
-
- /* Read-modify-write DRPW_SCRATCH_START register (see next state)
- to be used by DRPw FW. The RTRIM value will be added by the FW
- before taking DRPw out of reset */
-
- wl1271_debug(DEBUG_BOOT, "DRPW_SCRATCH_START %08x", DRPW_SCRATCH_START);
- clk = wl1271_read32(wl, DRPW_SCRATCH_START);
-
- wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk);
-
- if (wl->chip.id == CHIP_ID_1283_PG20) {
- clk |= ((selected_clock & 0x3) << 1) << 4;
- } else {
- clk |= (wl->ref_clock << 1) << 4;
- }
-
- wl1271_write32(wl, DRPW_SCRATCH_START, clk);
-
- wl1271_set_partition(wl, &wl12xx_part_table[PART_WORK]);
-
- /* Disable interrupts */
- wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
-
- ret = wl1271_boot_soft_reset(wl);
- if (ret < 0)
- goto out;
-
- /* 2. start processing NVS file */
- ret = wl1271_boot_upload_nvs(wl);
- if (ret < 0)
- goto out;
-
- /* write firmware's last address (ie. it's length) to
- * ACX_EEPROMLESS_IND_REG */
- wl1271_debug(DEBUG_BOOT, "ACX_EEPROMLESS_IND_REG");
-
- wl1271_write32(wl, ACX_EEPROMLESS_IND_REG, ACX_EEPROMLESS_IND_REG);
-
- tmp = wl1271_read32(wl, CHIP_ID_B);
-
- wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp);
-
- /* 6. read the EEPROM parameters */
- tmp = wl1271_read32(wl, SCR_PAD2);
-
- /* WL1271: The reference driver skips steps 7 to 10 (jumps directly
- * to upload_fw) */
-
- if (wl->chip.id == CHIP_ID_1283_PG20)
- wl1271_top_reg_write(wl, SDIO_IO_DS, wl->conf.hci_io_ds);
-
- ret = wl1271_boot_upload_firmware(wl);
- if (ret < 0)
- goto out;
-
-out:
- return ret;
-}
-EXPORT_SYMBOL_GPL(wl1271_load_firmware);
-
-int wl1271_boot(struct wl1271 *wl)
-{
- int ret;
-
- /* upload NVS and firmware */
- ret = wl1271_load_firmware(wl);
- if (ret)
- return ret;
-
- /* 10.5 start firmware */
- ret = wl1271_boot_run_firmware(wl);
- if (ret < 0)
- goto out;
-
- ret = wl1271_boot_write_irq_polarity(wl);
- if (ret < 0)
- goto out;
-
- wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
- WL1271_ACX_ALL_EVENTS_VECTOR);
-
- /* Enable firmware interrupts now */
- wl1271_boot_enable_interrupts(wl);
-
- wl1271_event_mbox_config(wl);
-
-out:
- return ret;
-}
diff --git a/drivers/net/wireless/wl12xx/boot.h b/drivers/net/wireless/wl12xx/boot.h
deleted file mode 100644
index c3adc09..0000000
--- a/drivers/net/wireless/wl12xx/boot.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * This file is part of wl1271
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Contact: Luciano Coelho <luciano.coelho@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __BOOT_H__
-#define __BOOT_H__
-
-#include "wl12xx.h"
-
-int wl1271_boot(struct wl1271 *wl);
-int wl1271_load_firmware(struct wl1271 *wl);
-
-#define WL1271_NO_SUBBANDS 8
-#define WL1271_NO_POWER_LEVELS 4
-#define WL1271_FW_VERSION_MAX_LEN 20
-
-struct wl1271_static_data {
- u8 mac_address[ETH_ALEN];
- u8 padding[2];
- u8 fw_version[WL1271_FW_VERSION_MAX_LEN];
- u32 hw_version;
- u8 tx_power_table[WL1271_NO_SUBBANDS][WL1271_NO_POWER_LEVELS];
-};
-
-/* number of times we try to read the INIT interrupt */
-#define INIT_LOOP 20000
-
-/* delay between retries */
-#define INIT_LOOP_DELAY 50
-
-#define WU_COUNTER_PAUSE_VAL 0x3FF
-#define WELP_ARM_COMMAND_VAL 0x4
-
-#define OCP_REG_POLARITY 0x0064
-#define OCP_REG_CLK_TYPE 0x0448
-#define OCP_REG_CLK_POLARITY 0x0cb2
-#define OCP_REG_CLK_PULL 0x0cb4
-
-#define CMD_MBOX_ADDRESS 0x407B4
-
-#define POLARITY_LOW BIT(1)
-#define NO_PULL (BIT(14) | BIT(15))
-
-#define FREF_CLK_TYPE_BITS 0xfffffe7f
-#define CLK_REQ_PRCM 0x100
-#define FREF_CLK_POLARITY_BITS 0xfffff8ff
-#define CLK_REQ_OUTN_SEL 0x700
-
-/* PLL configuration algorithm for wl128x */
-#define SYS_CLK_CFG_REG 0x2200
-/* Bit[0] - 0-TCXO, 1-FREF */
-#define MCS_PLL_CLK_SEL_FREF BIT(0)
-/* Bit[3:2] - 01-TCXO, 10-FREF */
-#define WL_CLK_REQ_TYPE_FREF BIT(3)
-#define WL_CLK_REQ_TYPE_PG2 (BIT(3) | BIT(2))
-/* Bit[4] - 0-TCXO, 1-FREF */
-#define PRCM_CM_EN_MUX_WLAN_FREF BIT(4)
-
-#define TCXO_ILOAD_INT_REG 0x2264
-#define TCXO_CLK_DETECT_REG 0x2266
-
-#define TCXO_DET_FAILED BIT(4)
-
-#define FREF_ILOAD_INT_REG 0x2084
-#define FREF_CLK_DETECT_REG 0x2086
-#define FREF_CLK_DETECT_FAIL BIT(4)
-
-/* Use this reg for masking during driver access */
-#define WL_SPARE_REG 0x2320
-#define WL_SPARE_VAL BIT(2)
-/* Bit[6:5:3] - mask wl write SYS_CLK_CFG[8:5:2:4] */
-#define WL_SPARE_MASK_8526 (BIT(6) | BIT(5) | BIT(3))
-
-#define PLL_LOCK_COUNTERS_REG 0xD8C
-#define PLL_LOCK_COUNTERS_COEX 0x0F
-#define PLL_LOCK_COUNTERS_MCS 0xF0
-#define MCS_PLL_OVERRIDE_REG 0xD90
-#define MCS_PLL_CONFIG_REG 0xD92
-#define MCS_SEL_IN_FREQ_MASK 0x0070
-#define MCS_SEL_IN_FREQ_SHIFT 4
-#define MCS_PLL_CONFIG_REG_VAL 0x73
-#define MCS_PLL_ENABLE_HP (BIT(0) | BIT(1))
-
-#define MCS_PLL_M_REG 0xD94
-#define MCS_PLL_N_REG 0xD96
-#define MCS_PLL_M_REG_VAL 0xC8
-#define MCS_PLL_N_REG_VAL 0x07
-
-#define SDIO_IO_DS 0xd14
-
-/* SDIO/wSPI DS configuration values */
-enum {
- HCI_IO_DS_8MA = 0,
- HCI_IO_DS_4MA = 1, /* default */
- HCI_IO_DS_6MA = 2,
- HCI_IO_DS_2MA = 3,
-};
-
-/* end PLL configuration algorithm for wl128x */
-
-#endif
diff --git a/drivers/net/wireless/wl12xx/io.c b/drivers/net/wireless/wl12xx/io.c
deleted file mode 100644
index c574a3b..0000000
--- a/drivers/net/wireless/wl12xx/io.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * This file is part of wl1271
- *
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Contact: Luciano Coelho <luciano.coelho@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/interrupt.h>
-
-#include "wl12xx.h"
-#include "debug.h"
-#include "wl12xx_80211.h"
-#include "io.h"
-#include "tx.h"
-
-#define OCP_CMD_LOOP 32
-
-#define OCP_CMD_WRITE 0x1
-#define OCP_CMD_READ 0x2
-
-#define OCP_READY_MASK BIT(18)
-#define OCP_STATUS_MASK (BIT(16) | BIT(17))
-
-#define OCP_STATUS_NO_RESP 0x00000
-#define OCP_STATUS_OK 0x10000
-#define OCP_STATUS_REQ_FAILED 0x20000
-#define OCP_STATUS_RESP_ERROR 0x30000
-
-struct wl1271_partition_set wl12xx_part_table[PART_TABLE_LEN] = {
- [PART_DOWN] = {
- .mem = {
- .start = 0x00000000,
- .size = 0x000177c0
- },
- .reg = {
- .start = REGISTERS_BASE,
- .size = 0x00008800
- },
- .mem2 = {
- .start = 0x00000000,
- .size = 0x00000000
- },
- .mem3 = {
- .start = 0x00000000,
- .size = 0x00000000
- },
- },
-
- [PART_WORK] = {
- .mem = {
- .start = 0x00040000,
- .size = 0x00014fc0
- },
- .reg = {
- .start = REGISTERS_BASE,
- .size = 0x0000a000
- },
- .mem2 = {
- .start = 0x003004f8,
- .size = 0x00000004
- },
- .mem3 = {
- .start = 0x00040404,
- .size = 0x00000000
- },
- },
-
- [PART_DRPW] = {
- .mem = {
- .start = 0x00040000,
- .size = 0x00014fc0
- },
- .reg = {
- .start = DRPW_BASE,
- .size = 0x00006000
- },
- .mem2 = {
- .start = 0x00000000,
- .size = 0x00000000
- },
- .mem3 = {
- .start = 0x00000000,
- .size = 0x00000000
- }
- }
-};
-
-bool wl1271_set_block_size(struct wl1271 *wl)
-{
- if (wl->if_ops->set_block_size) {
- wl->if_ops->set_block_size(wl->dev, WL12XX_BUS_BLOCK_SIZE);
- return true;
- }
-
- return false;
-}
-
-void wl1271_disable_interrupts(struct wl1271 *wl)
-{
- disable_irq(wl->irq);
-}
-
-void wl1271_enable_interrupts(struct wl1271 *wl)
-{
- enable_irq(wl->irq);
-}
-
-/* Set the SPI partitions to access the chip addresses
- *
- * To simplify driver code, a fixed (virtual) memory map is defined for
- * register and memory addresses. Because in the chipset, in different stages
- * of operation, those addresses will move around, an address translation
- * mechanism is required.
- *
- * There are four partitions (three memory and one register partition),
- * which are mapped to two different areas of the hardware memory.
- *
- * Virtual address
- * space
- *
- * | |
- * ...+----+--> mem.start
- * Physical address ... | |
- * space ... | | [PART_0]
- * ... | |
- * 00000000 <--+----+... ...+----+--> mem.start + mem.size
- * | | ... | |
- * |MEM | ... | |
- * | | ... | |
- * mem.size <--+----+... | | {unused area)
- * | | ... | |
- * |REG | ... | |
- * mem.size | | ... | |
- * + <--+----+... ...+----+--> reg.start
- * reg.size | | ... | |
- * |MEM2| ... | | [PART_1]
- * | | ... | |
- * ...+----+--> reg.start + reg.size
- * | |
- *
- */
-int wl1271_set_partition(struct wl1271 *wl,
- struct wl1271_partition_set *p)
-{
- /* copy partition info */
- memcpy(&wl->part, p, sizeof(*p));
-
- wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
- p->mem.start, p->mem.size);
- wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
- p->reg.start, p->reg.size);
- wl1271_debug(DEBUG_SPI, "mem2_start %08X mem2_size %08X",
- p->mem2.start, p->mem2.size);
- wl1271_debug(DEBUG_SPI, "mem3_start %08X mem3_size %08X",
- p->mem3.start, p->mem3.size);
-
- /* write partition info to the chipset */
- wl1271_raw_write32(wl, HW_PART0_START_ADDR, p->mem.start);
- wl1271_raw_write32(wl, HW_PART0_SIZE_ADDR, p->mem.size);
- wl1271_raw_write32(wl, HW_PART1_START_ADDR, p->reg.start);
- wl1271_raw_write32(wl, HW_PART1_SIZE_ADDR, p->reg.size);
- wl1271_raw_write32(wl, HW_PART2_START_ADDR, p->mem2.start);
- wl1271_raw_write32(wl, HW_PART2_SIZE_ADDR, p->mem2.size);
- wl1271_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(wl1271_set_partition);
-
-void wl1271_io_reset(struct wl1271 *wl)
-{
- if (wl->if_ops->reset)
- wl->if_ops->reset(wl->dev);
-}
-
-void wl1271_io_init(struct wl1271 *wl)
-{
- if (wl->if_ops->init)
- wl->if_ops->init(wl->dev);
-}
-
-void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val)
-{
- /* write address >> 1 + 0x30000 to OCP_POR_CTR */
- addr = (addr >> 1) + 0x30000;
- wl1271_write32(wl, OCP_POR_CTR, addr);
-
- /* write value to OCP_POR_WDATA */
- wl1271_write32(wl, OCP_DATA_WRITE, val);
-
- /* write 1 to OCP_CMD */
- wl1271_write32(wl, OCP_CMD, OCP_CMD_WRITE);
-}
-
-u16 wl1271_top_reg_read(struct wl1271 *wl, int addr)
-{
- u32 val;
- int timeout = OCP_CMD_LOOP;
-
- /* write address >> 1 + 0x30000 to OCP_POR_CTR */
- addr = (addr >> 1) + 0x30000;
- wl1271_write32(wl, OCP_POR_CTR, addr);
-
- /* write 2 to OCP_CMD */
- wl1271_write32(wl, OCP_CMD, OCP_CMD_READ);
-
- /* poll for data ready */
- do {
- val = wl1271_read32(wl, OCP_DATA_READ);
- } while (!(val & OCP_READY_MASK) && --timeout);
-
- if (!timeout) {
- wl1271_warning("Top register access timed out.");
- return 0xffff;
- }
-
- /* check data status and return if OK */
- if ((val & OCP_STATUS_MASK) == OCP_STATUS_OK)
- return val & 0xffff;
- else {
- wl1271_warning("Top register access returned error.");
- return 0xffff;
- }
-}
-