diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 784d4e6..4a6e4ba 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -194,7 +194,7 @@
 {
 	unsigned char scsi_cmd[MAX_COMMAND_SIZE];
 
-	printk(KERN_NOTICE "scsi: unlocking floptical drive\n");
+	sdev_printk(KERN_NOTICE, sdev, "unlocking floptical drive\n");
 	scsi_cmd[0] = MODE_SENSE;
 	scsi_cmd[1] = 0;
 	scsi_cmd[2] = 0x2e;
@@ -596,8 +596,8 @@
 					  HZ / 2 + HZ * scsi_inq_timeout, 3,
 					  &resid);
 
-		SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: INQUIRY %s "
-				"with code 0x%x\n",
+		SCSI_LOG_SCAN_BUS(3, sdev_printk(KERN_INFO, sdev,
+				"scsi scan: INQUIRY %s with code 0x%x\n",
 				result ? "failed" : "successful", result));
 
 		if (result) {
@@ -667,9 +667,10 @@
 		}
 
 	} else if (pass == 2) {
-		printk(KERN_INFO "scsi scan: %d byte inquiry failed.  "
-				"Consider BLIST_INQUIRY_36 for this device\n",
-				try_inquiry_len);
+		sdev_printk(KERN_INFO, sdev,
+			    "scsi scan: %d byte inquiry failed.  "
+			    "Consider BLIST_INQUIRY_36 for this device\n",
+			    try_inquiry_len);
 
 		/* If this pass failed, the third pass goes back and transfers
 		 * the same amount as we successfully got in the first pass. */
@@ -702,8 +703,9 @@
 	 * strings.
 	 */
 	if (sdev->inquiry_len < 36) {
-		printk(KERN_INFO "scsi scan: INQUIRY result too short (%d),"
-				" using 36\n", sdev->inquiry_len);
+		sdev_printk(KERN_INFO, sdev,
+			    "scsi scan: INQUIRY result too short (%d),"
+			    " using 36\n", sdev->inquiry_len);
 		sdev->inquiry_len = 36;
 	}
 
@@ -822,7 +824,8 @@
 		sdev->writeable = 0;
 		break;
 	default:
-		printk(KERN_INFO "scsi: unknown device type %d\n", sdev->type);
+		sdev_printk(KERN_INFO, sdev, "unknown device type %d\n",
+			    sdev->type);
 	}
 
 	if (sdev->type == TYPE_RBC || sdev->type == TYPE_ROM) {
@@ -1044,7 +1047,7 @@
 	sdev = scsi_device_lookup_by_target(starget, lun);
 	if (sdev) {
 		if (rescan || !scsi_device_created(sdev)) {
-			SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO
+			SCSI_LOG_SCAN_BUS(3, sdev_printk(KERN_INFO, sdev,
 				"scsi scan: device exists on %s\n",
 				dev_name(&sdev->sdev_gendev)));
 			if (sdevp)
@@ -1131,7 +1134,7 @@
 	if (((result[0] >> 5) == 1 || starget->pdt_1f_for_no_lun) &&
 	    (result[0] & 0x1f) == 0x1f &&
 	    !scsi_is_wlun(lun)) {
-		SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO
+		SCSI_LOG_SCAN_BUS(3, sdev_printk(KERN_INFO, sdev,
 					"scsi scan: peripheral device type"
 					" of 31, no device added\n"));
 		res = SCSI_SCAN_TARGET_PRESENT;
@@ -1185,8 +1188,8 @@
 	u64 sparse_lun, lun;
 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
 
-	SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: Sequential scan of"
-				    "%s\n", dev_name(&starget->dev)));
+	SCSI_LOG_SCAN_BUS(3, starget_printk(KERN_INFO, starget,
+		"scsi scan: Sequential scan\n"));
 
 	max_dev_lun = min(max_scsi_luns, shost->max_lun);
 	/*
@@ -1431,17 +1434,19 @@
 	 * a retry.
 	 */
 	for (retries = 0; retries < 3; retries++) {
-		SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: Sending"
-				" REPORT LUNS to %s (try %d)\n", devname,
+		SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev,
+				"scsi scan: Sending REPORT LUNS to (try %d)\n",
 				retries));
 
 		result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE,
 					  lun_data, length, &sshdr,
 					  SCSI_TIMEOUT + 4 * HZ, 3, NULL);
 
-		SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: REPORT LUNS"
-				" %s (try %d) result 0x%x\n", result
-				?  "failed" : "successful", retries, result));
+		SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev,
+				"scsi scan: REPORT LUNS"
+				" %s (try %d) result 0x%x\n",
+				result ?  "failed" : "successful",
+				retries, result));
 		if (result == 0)
 			break;
 		else if (scsi_sense_valid(&sshdr)) {
@@ -1467,10 +1472,11 @@
 
 	num_luns = (length / sizeof(struct scsi_lun));
 	if (num_luns > max_scsi_report_luns) {
-		printk(KERN_WARNING "scsi: On %s only %d (max_scsi_report_luns)"
-		       " of %d luns reported, try increasing"
-		       " max_scsi_report_luns.\n", devname,
-		       max_scsi_report_luns, num_luns);
+		sdev_printk(KERN_WARNING, sdev,
+			    "Only %d (max_scsi_report_luns)"
+			    " of %d luns reported, try increasing"
+			    " max_scsi_report_luns.\n",
+			    max_scsi_report_luns, num_luns);
 		num_luns = max_scsi_report_luns;
 	}
 
@@ -1485,9 +1491,9 @@
 		lun = scsilun_to_int(lunp);
 
 		if (lun > sdev->host->max_lun) {
-			printk(KERN_WARNING "scsi: %s lun%llu has a LUN larger"
-			       " than allowed by the host adapter\n",
-			       devname, lun);
+			sdev_printk(KERN_WARNING, sdev,
+				    "lun%llu has a LUN larger than"
+				    " allowed by the host adapter\n", lun);
 		} else {
 			int res;
 
@@ -1765,8 +1771,7 @@
 		return NULL;
 
 	if (shost->async_scan) {
-		printk("%s called twice for host %d", __func__,
-				shost->host_no);
+		shost_printk(KERN_INFO, shost, "%s called twice\n", __func__);
 		dump_stack();
 		return NULL;
 	}
@@ -1819,8 +1824,7 @@
 	mutex_lock(&shost->scan_mutex);
 
 	if (!shost->async_scan) {
-		printk("%s called twice for host %d", __func__,
-				shost->host_no);
+		shost_printk(KERN_INFO, shost, "%s called twice\n", __func__);
 		dump_stack();
 		mutex_unlock(&shost->scan_mutex);
 		return;