drm/i915/chv: Try to program the PHY used clock channel overrides
These should make it possible to feed port C from pipe A or port B from
pipe B. Didn't quite seem to work though.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 82edfbc..709f049 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2119,6 +2119,51 @@
vlv_wait_port_ready(dev_priv, dport);
}
+static void chv_dp_pre_pll_enable(struct intel_encoder *encoder)
+{
+ struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
+ struct drm_device *dev = encoder->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc =
+ to_intel_crtc(encoder->base.crtc);
+ enum dpio_channel ch = vlv_dport_to_channel(dport);
+ enum pipe pipe = intel_crtc->pipe;
+ u32 val;
+
+ mutex_lock(&dev_priv->dpio_lock);
+
+ /* program clock channel usage */
+ val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(ch));
+ val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
+ if (pipe != PIPE_B)
+ val &= ~CHV_PCS_USEDCLKCHANNEL;
+ else
+ val |= CHV_PCS_USEDCLKCHANNEL;
+ vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW8(ch), val);
+
+ val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW8(ch));
+ val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
+ if (pipe != PIPE_B)
+ val &= ~CHV_PCS_USEDCLKCHANNEL;
+ else
+ val |= CHV_PCS_USEDCLKCHANNEL;
+ vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW8(ch), val);
+
+ /*
+ * This a a bit weird since generally CL
+ * matches the pipe, but here we need to
+ * pick the CL based on the port.
+ */
+ val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW19(ch));
+ if (pipe != PIPE_B)
+ val &= ~CHV_CMN_USEDCLKCHANNEL;
+ else
+ val |= CHV_CMN_USEDCLKCHANNEL;
+ vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW19(ch), val);
+
+ mutex_unlock(&dev_priv->dpio_lock);
+}
+
/*
* Native read with retry for link status and receiver capability reads for
* cases where the sink may still be asleep.
@@ -4335,6 +4380,7 @@
intel_encoder->get_hw_state = intel_dp_get_hw_state;
intel_encoder->get_config = intel_dp_get_config;
if (IS_CHERRYVIEW(dev)) {
+ intel_encoder->pre_pll_enable = chv_dp_pre_pll_enable;
intel_encoder->pre_enable = chv_pre_enable_dp;
intel_encoder->enable = vlv_enable_dp;
intel_encoder->post_disable = chv_post_disable_dp;