omap3: Add i2c eeprom driver to read EDID on IGEP v2
Add i2c eeprom driver to access monitor EDID binary information
from user space, something that is required by 'decode-edid' and
'parse-edid'.
Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 22f73b4..cfd67bf 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -542,7 +542,7 @@
};
-static struct i2c_board_info __initdata igep2_i2c_boardinfo[] = {
+static struct i2c_board_info __initdata igep2_i2c1_boardinfo[] = {
{
I2C_BOARD_INFO("twl4030", 0x48),
.flags = I2C_CLIENT_WAKE,
@@ -551,14 +551,29 @@
},
};
-static int __init igep2_i2c_init(void)
+static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("eeprom", 0x50),
+ },
+};
+
+static void __init igep2_i2c_init(void)
{
- omap_register_i2c_bus(1, 2600, igep2_i2c_boardinfo,
- ARRAY_SIZE(igep2_i2c_boardinfo));
- /* Bus 3 is attached to the DVI port where devices like the pico DLP
- * projector don't work reliably with 400kHz */
- omap_register_i2c_bus(3, 100, NULL, 0);
- return 0;
+ int ret;
+
+ ret = omap_register_i2c_bus(1, 2600, igep2_i2c1_boardinfo,
+ ARRAY_SIZE(igep2_i2c1_boardinfo));
+ if (ret)
+ pr_warning("IGEP2: Could not register I2C1 bus (%d)\n", ret);
+
+ /*
+ * Bus 3 is attached to the DVI port where devices like the pico DLP
+ * projector don't work reliably with 400kHz
+ */
+ ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo,
+ ARRAY_SIZE(igep2_i2c3_boardinfo));
+ if (ret)
+ pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);
}
static struct omap_musb_board_data musb_board_data = {
@@ -636,7 +651,7 @@
/* Get IGEP2 hardware revision */
igep2_get_revision();
-
+ /* Register I2C busses and drivers */
igep2_i2c_init();
platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices));
omap_serial_init();